diff options
| author | David S. Miller <davem@davemloft.net> | 2013-11-04 13:48:30 -0500 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2013-11-04 13:48:30 -0500 |
| commit | 394efd19d5fcae936261bd48e5b33b21897aacf8 (patch) | |
| tree | c48cf3ddbb07fd87309f1abdf31a27c71330e587 /drivers | |
| parent | f421436a591d34fa5279b54a96ac07d70250cc8d (diff) | |
| parent | be408cd3e1fef73e9408b196a79b9934697fe3b1 (diff) | |
| download | linux-394efd19d5fcae936261bd48e5b33b21897aacf8.tar.bz2 | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/ethernet/emulex/benet/be.h
drivers/net/netconsole.c
net/bridge/br_private.h
Three mostly trivial conflicts.
The net/bridge/br_private.h conflict was a function signature (argument
addition) change overlapping with the extern removals from Joe Perches.
In drivers/net/netconsole.c we had one change adjusting a printk message
whilst another changed "printk(KERN_INFO" into "pr_info(".
Lastly, the emulex change was a new inline function addition overlapping
with Joe Perches's extern removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
73 files changed, 676 insertions, 664 deletions
diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c index 51410c2ac2cb..4d978a3c88f7 100644 --- a/drivers/clk/clk-nomadik.c +++ b/drivers/clk/clk-nomadik.c @@ -27,6 +27,14 @@ */ #define SRC_CR 0x00U +#define SRC_CR_T0_ENSEL BIT(15) +#define SRC_CR_T1_ENSEL BIT(17) +#define SRC_CR_T2_ENSEL BIT(19) +#define SRC_CR_T3_ENSEL BIT(21) +#define SRC_CR_T4_ENSEL BIT(23) +#define SRC_CR_T5_ENSEL BIT(25) +#define SRC_CR_T6_ENSEL BIT(27) +#define SRC_CR_T7_ENSEL BIT(29) #define SRC_XTALCR 0x0CU #define SRC_XTALCR_XTALTIMEN BIT(20) #define SRC_XTALCR_SXTALDIS BIT(19) @@ -543,6 +551,19 @@ void __init nomadik_clk_init(void) __func__, np->name); return; } + + /* Set all timers to use the 2.4 MHz TIMCLK */ + val = readl(src_base + SRC_CR); + val |= SRC_CR_T0_ENSEL; + val |= SRC_CR_T1_ENSEL; + val |= SRC_CR_T2_ENSEL; + val |= SRC_CR_T3_ENSEL; + val |= SRC_CR_T4_ENSEL; + val |= SRC_CR_T5_ENSEL; + val |= SRC_CR_T6_ENSEL; + val |= SRC_CR_T7_ENSEL; + writel(val, src_base + SRC_CR); + val = readl(src_base + SRC_XTALCR); pr_info("SXTALO is %s\n", (val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled"); diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c index fc777bdc1886..81a202d12a7a 100644 --- a/drivers/clk/mvebu/armada-370.c +++ b/drivers/clk/mvebu/armada-370.c @@ -39,8 +39,8 @@ static const struct coreclk_ratio a370_coreclk_ratios[] __initconst = { }; static const u32 a370_tclk_freqs[] __initconst = { - 16600000, - 20000000, + 166000000, + 200000000, }; static u32 __init a370_get_tclk_freq(void __iomem *sar) diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c index 5bb848cac6ec..81dd31a686df 100644 --- a/drivers/clk/socfpga/clk.c +++ b/drivers/clk/socfpga/clk.c @@ -49,7 +49,7 @@ #define SOCFPGA_L4_SP_CLK "l4_sp_clk" #define SOCFPGA_NAND_CLK "nand_clk" #define SOCFPGA_NAND_X_CLK "nand_x_clk" -#define SOCFPGA_MMC_CLK "mmc_clk" +#define SOCFPGA_MMC_CLK "sdmmc_clk" #define SOCFPGA_DB_CLK "gpio_db_clk" #define div_mask(width) ((1 << (width)) - 1) diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index 67ccf4aa7277..f5e4c21b301f 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -107,7 +107,7 @@ static int icst_set_rate(struct clk_hw *hw, unsigned long rate, vco = icst_hz_to_vco(icst->params, rate); icst->rate = icst_hz(icst->params, vco); - vco_set(icst->vcoreg, icst->lockreg, vco); + vco_set(icst->lockreg, icst->vcoreg, vco); return 0; } diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index d2c3253e015e..506fd23c7550 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -986,12 +986,12 @@ static int __init acpi_cpufreq_init(void) { int ret; + if (acpi_disabled) + return -ENODEV; + /* don't keep reloading if cpufreq_driver exists */ if (cpufreq_get_current_driver()) - return 0; - - if (acpi_disabled) - return 0; + return -EEXIST; pr_debug("acpi_cpufreq_init\n"); diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index badf6206b2b2..eb3fdc755000 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -48,7 +48,7 @@ static inline int32_t div_fp(int32_t x, int32_t y) } struct sample { - int core_pct_busy; + int32_t core_pct_busy; u64 aperf; u64 mperf; int freq; @@ -68,7 +68,7 @@ struct _pid { int32_t i_gain; int32_t d_gain; int deadband; - int last_err; + int32_t last_err; }; struct cpudata { @@ -153,16 +153,15 @@ static inline void pid_d_gain_set(struct _pid *pid, int percent) pid->d_gain = div_fp(int_tofp(percent), int_tofp(100)); } -static signed int pid_calc(struct _pid *pid, int busy) +static signed int pid_calc(struct _pid *pid, int32_t busy) { - signed int err, result; + signed int result; int32_t pterm, dterm, fp_error; int32_t integral_limit; - err = pid->setpoint - busy; - fp_error = int_tofp(err); + fp_error = int_tofp(pid->setpoint) - busy; - if (abs(err) <= pid->deadband) + if (abs(fp_error) <= int_tofp(pid->deadband)) return 0; pterm = mul_fp(pid->p_gain, fp_error); @@ -176,8 +175,8 @@ static signed int pid_calc(struct _pid *pid, int busy) if (pid->integral < -integral_limit) pid->integral = -integral_limit; - dterm = mul_fp(pid->d_gain, (err - pid->last_err)); - pid->last_err = err; + dterm = mul_fp(pid->d_gain, fp_error - pid->last_err); + pid->last_err = fp_error; result = pterm + mul_fp(pid->integral, pid->i_gain) + dterm; @@ -367,12 +366,13 @@ static int intel_pstate_turbo_pstate(void) static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max) { int max_perf = cpu->pstate.turbo_pstate; + int max_perf_adj; int min_perf; if (limits.no_turbo) max_perf = cpu->pstate.max_pstate; - max_perf = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf)); - *max = clamp_t(int, max_perf, + max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf)); + *max = clamp_t(int, max_perf_adj, cpu->pstate.min_pstate, cpu->pstate.turbo_pstate); min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits.min_perf)); @@ -436,8 +436,9 @@ static inline void intel_pstate_calc_busy(struct cpudata *cpu, struct sample *sample) { u64 core_pct; - core_pct = div64_u64(sample->aperf * 100, sample->mperf); - sample->freq = cpu->pstate.max_pstate * core_pct * 1000; + core_pct = div64_u64(int_tofp(sample->aperf * 100), + sample->mperf); + sample->freq = fp_toint(cpu->pstate.max_pstate * core_pct * 1000); sample->core_pct_busy = core_pct; } @@ -469,22 +470,19 @@ static inline void intel_pstate_set_sample_time(struct cpudata *cpu) mod_timer_pinned(&cpu->timer, jiffies + delay); } -static inline int intel_pstate_get_scaled_busy(struct cpudata *cpu) +static inline int32_t intel_pstate_get_scaled_busy(struct cpudata *cpu) { - int32_t busy_scaled; int32_t core_busy, max_pstate, current_pstate; - core_busy = int_tofp(cpu->samples[cpu->sample_ptr].core_pct_busy); + core_busy = cpu->samples[cpu->sample_ptr].core_pct_busy; max_pstate = int_tofp(cpu->pstate.max_pstate); current_pstate = int_tofp(cpu->pstate.current_pstate); - busy_scaled = mul_fp(core_busy, div_fp(max_pstate, current_pstate)); - - return fp_toint(busy_scaled); + return mul_fp(core_busy, div_fp(max_pstate, current_pstate)); } static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) { - int busy_scaled; + int32_t busy_scaled; struct _pid *pid; signed int ctl = 0; int steps; diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 3519111c566b..10b577fcf48d 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -305,6 +305,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( edma_alloc_slot(EDMA_CTLR(echan->ch_num), EDMA_SLOT_ANY); if (echan->slot[i] < 0) { + kfree(edesc); dev_err(dev, "Failed to allocate slot\n"); kfree(edesc); return NULL; @@ -346,6 +347,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( ccnt = sg_dma_len(sg) / (acnt * bcnt); if (ccnt > (SZ_64K - 1)) { dev_err(dev, "Exceeded max SG segment size\n"); + kfree(edesc); return NULL; } cidx = acnt * bcnt; diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 05ad9ba0a67e..fe58d0833a11 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -61,7 +61,7 @@ static int drm_version(struct drm_device *dev, void *data, /** Ioctl table */ static const struct drm_ioctl_desc drm_ioctls[] = { - DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_UNLOCKED), + DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_UNLOCKED|DRM_RENDER_ALLOW), DRM_IOCTL_DEF(DRM_IOCTL_GET_UNIQUE, drm_getunique, 0), DRM_IOCTL_DEF(DRM_IOCTL_GET_MAGIC, drm_getmagic, 0), DRM_IOCTL_DEF(DRM_IOCTL_IRQ_BUSID, drm_irq_by_busid, DRM_MASTER|DRM_ROOT_ONLY), diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index ea9022ef15d5..10d1de5bce6f 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -83,8 +83,7 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder, return true; } -static void intel_crt_get_config(struct intel_encoder *encoder, - struct intel_crtc_config *pipe_config) +static unsigned int intel_crt_get_flags(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_crt *crt = intel_encoder_to_crt(encoder); @@ -102,7 +101,25 @@ static void intel_crt_get_config(struct intel_encoder *encoder, else flags |= DRM_MODE_FLAG_NVSYNC; - pipe_config->adjusted_mode.flags |= flags; + return flags; +} + +static void intel_crt_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) +{ + pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder); +} + +static void hsw_crt_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) +{ + intel_ddi_get_config(encoder, pipe_config); + + pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC | + DRM_MODE_FLAG_NHSYNC | + DRM_MODE_FLAG_PVSYNC | + DRM_MODE_FLAG_NVSYNC); + pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder); } /* Note: The caller is required to filter out dpms modes not supported by the @@ -799,7 +816,10 @@ void intel_crt_init(struct drm_device *dev) crt->base.mode_set = intel_crt_mode_set; crt->base.disable = intel_disable_crt; crt->base.enable = intel_enable_crt; - crt->base.get_config = intel_crt_get_config; + if (IS_HASWELL(dev)) + crt->base.get_config = hsw_crt_get_config; + else + crt->base.get_config = intel_crt_get_config; if (I915_HAS_HOTPLUG(dev)) crt->base.hpd_pin = HPD_CRT; if (HAS_DDI(dev)) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 63de2701b974..b53fff84a7d5 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1249,8 +1249,8 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder) intel_dp_check_link_status(intel_dp); } -static void intel_ddi_get_config(struct intel_encoder *encoder, - struct intel_crtc_config *pipe_config) +void intel_ddi_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); @@ -1268,6 +1268,23 @@ static void intel_ddi_get_config(struct intel_encoder *encoder, flags |= DRM_MODE_FLAG_NVSYNC; pipe_config->adjusted_mode.flags |= flags; + + switch (temp & TRANS_DDI_BPC_MASK) { + case TRANS_DDI_BPC_6: + pipe_config->pipe_bpp = 18; + break; + case TRANS_DDI_BPC_8: + pipe_config->pipe_bpp = 24; + break; + case TRANS_DDI_BPC_10: + pipe_config->pipe_bpp = 30; + break; + case TRANS_DDI_BPC_12: + pipe_config->pipe_bpp = 36; + break; + default: + break; + } } static void intel_ddi_destroy(struct drm_encoder *encoder) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 581fb4b2f766..d78d33f9337d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2327,9 +2327,10 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc) FDI_FE_ERRC_ENABLE); } -static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc) +static bool pipe_has_enabled_pch(struct intel_crtc *crtc) { - return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder; + return crtc->base.enabled && crtc->active && + crtc->config.has_pch_encoder; } static void ivb_modeset_global_resources(struct drm_device *dev) @@ -2979,6 +2980,48 @@ static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc, I915_READ(VSYNCSHIFT(cpu_transcoder))); } +static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t temp; + + temp = I915_READ(SOUTH_CHICKEN1); + if (temp & FDI_BC_BIFURCATION_SELECT) + return; + + WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); + WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); + + temp |= FDI_BC_BIFURCATION_SELECT; + DRM_DEBUG_KMS("enabling fdi C rx\n"); + I915_WRITE(SOUTH_CHICKEN1, temp); + POSTING_READ(SOUTH_CHICKEN1); +} + +static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc) +{ + struct drm_device *dev = intel_crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + switch (intel_crtc->pipe) { + case PIPE_A: + break; + case PIPE_B: + if (intel_crtc->config.fdi_lanes > 2) + WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT); + else + cpt_enable_fdi_bc_bifurcation(dev); + + break; + case PIPE_C: + cpt_enable_fdi_bc_bifurcation(dev); + + break; + default: + BUG(); + } +} + /* * Enable PCH resources required for PCH ports: * - PCH PLLs @@ -2997,6 +3040,9 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) assert_pch_transcoder_disabled(dev_priv, pipe); + if (IS_IVYBRIDGE(dev)) + ivybridge_update_fdi_bc_bifurcation(intel_crtc); + /* Write the TU size bits before fdi link training, so that error * detection works. */ I915_WRITE(FDI_RX_TUSIZE1(pipe), @@ -4983,6 +5029,22 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc, if (!(tmp & PIPECONF_ENABLE)) return false; + if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) { + switch (tmp & PIPECONF_BPC_MASK) { + case PIPECONF_6BPC: + pipe_config->pipe_bpp = 18; + break; + case PIPECONF_8BPC: + pipe_config->pipe_bpp = 24; + break; + case PIPECONF_10BPC: + pipe_config->pipe_bpp = 30; + break; + default: + break; + } + } + intel_get_pipe_timings(crtc, pipe_config); i9xx_get_pfit_config(crtc, pipe_config); @@ -5576,48 +5638,6 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc, return true; } -static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t temp; - - temp = I915_READ(SOUTH_CHICKEN1); - if (temp & FDI_BC_BIFURCATION_SELECT) - return; - - WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); - WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); - - temp |= FDI_BC_BIFURCATION_SELECT; - DRM_DEBUG_KMS("enabling fdi C rx\n"); - I915_WRITE(SOUTH_CHICKEN1, temp); - POSTING_READ(SOUTH_CHICKEN1); -} - -static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc) -{ - struct drm_device *dev = intel_crtc->base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - - switch (intel_crtc->pipe) { - case PIPE_A: - break; - case PIPE_B: - if (intel_crtc->config.fdi_lanes > 2) - WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT); - else - cpt_enable_fdi_bc_bifurcation(dev); - - break; - case PIPE_C: - cpt_enable_fdi_bc_bifurcation(dev); - - break; - default: - BUG(); - } -} - int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp) { /* @@ -5811,9 +5831,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, &intel_crtc->config.fdi_m_n); } - if (IS_IVYBRIDGE(dev)) - ivybridge_update_fdi_bc_bifurcation(intel_crtc); - ironlake_set_pipeconf(crtc); /* Set up the display plane register */ @@ -5881,6 +5898,23 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc, if (!(tmp & PIPECONF_ENABLE)) return false; + switch (tmp & PIPECONF_BPC_MASK) { + case PIPECONF_6BPC: + pipe_config->pipe_bpp = 18; + break; + case PIPECONF_8BPC: + pipe_config->pipe_bpp = 24; + break; + case PIPECONF_10BPC: + pipe_config->pipe_bpp = 30; + break; + case PIPECONF_12BPC: + pipe_config->pipe_bpp = 36; + break; + default: + break; + } + if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) { struct intel_shared_dpll *pll; @@ -8612,6 +8646,9 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_X(dpll_hw_state.fp0); PIPE_CONF_CHECK_X(dpll_hw_state.fp1); + if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) + PIPE_CONF_CHECK_I(pipe_bpp); + #undef PIPE_CONF_CHECK_X #undef PIPE_CONF_CHECK_I #undef PIPE_CONF_CHECK_FLAGS diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 2c555f91bfae..1a431377d83b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1401,6 +1401,26 @@ static void intel_dp_get_config(struct intel_encoder *encoder, else pipe_config->port_clock = 270000; } + + if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp && + pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) { + /* + * This is a big fat ugly hack. + * + * Some machines in UEFI boot mode provide us a VBT that has 18 + * bpp and 1.62 GHz link bandwidth for eDP, which for reasons + * unknown we fail to light up. Yet the same BIOS boots up with + * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as + * max, not what it tells us to use. + * + * Note: This will still be broken if the eDP panel is not lit + * up by the BIOS, and thus we can't get the mode at module + * load. + */ + DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", + pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp); + dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp; + } } static bool is_edp_psr(struct intel_dp *intel_dp) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 9b7b68fd5d47..7f2b384ac939 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -765,6 +765,8 @@ extern void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder); extern bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector); extern void intel_ddi_fdi_disable(struct drm_crtc *crtc); +extern void intel_ddi_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config); extern void intel_display_handle_reset(struct drm_device *dev); extern bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev, diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 831a5c021c4b..b8af94a5be39 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -700,6 +700,22 @@ static const struct dmi_system_id intel_no_lvds[] = { }, { .callback = intel_no_lvds_dmi_callback, + .ident = "Intel D410PT", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel"), + DMI_MATCH(DMI_BOARD_NAME, "D410PT"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Intel D425KT", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "D425KT"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, .ident = "Intel D510MO", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel"), diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index fe1de855775e..57fcc4b16a52 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -291,6 +291,7 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode /* fglrx clears sth in AFMT_AUDIO_PACKET_CONTROL2 here */ WREG32(HDMI_ACR_PACKET_CONTROL + offset, + HDMI_ACR_SOURCE | /* select SW CTS value */ HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ evergreen_hdmi_update_ACR(encoder, mode->clock); diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c index 71399065db04..b41905573cd2 100644 --- a/drivers/gpu/drm/radeon/kv_dpm.c +++ b/drivers/gpu/drm/radeon/kv_dpm.c @@ -2635,7 +2635,7 @@ int kv_dpm_init(struct radeon_device *rdev) pi->caps_sclk_ds = true; pi->enable_auto_thermal_throttling = true; pi->disable_nb_ps3_in_battery = false; - pi->bapm_enable = true; + pi->bapm_enable = false; pi->voltage_drop_t = 0; pi->caps_sclk_throttle_low_notification = false; pi->caps_fps = false; /* true? */ diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index a400ac1c4147..24f4960f59ee 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1272,8 +1272,8 @@ struct radeon_blacklist_clocks struct radeon_clock_and_voltage_limits { u32 sclk; u32 mclk; - u32 vddc; - u32 vddci; + u16 vddc; + u16 vddci; }; struct radeon_clock_array { diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c index 3591855cc5b5..6df23502059a 100644 --- a/drivers/infiniband/ulp/isert/ib_isert.c +++ b/drivers/infiniband/ulp/isert/ib_isert.c @@ -594,7 +594,7 @@ isert_connect_release(struct isert_conn *isert_conn) pr_debug("Entering isert_connect_release(): >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>\n"); - if (device->use_frwr) + if (device && device->use_frwr) isert_conn_free_frwr_pool(isert_conn); if (isert_conn->conn_qp) { diff --git a/drivers/input/input.c b/drivers/input/input.c index c04469928925..e75d015024a1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1734,6 +1734,7 @@ EXPORT_SYMBOL_GPL(input_class); */ struct input_dev *input_allocate_device(void) { + static atomic_t input_no = ATOMIC_INIT(0); struct input_dev *dev; dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL); @@ -1743,9 +1744,13 @@ struct input_dev *input_allocate_device(void) device_initialize(&dev->dev); mutex_init(&dev->mutex); spin_lock_init(&dev->event_lock); + init_timer(&dev->timer); INIT_LIST_HEAD(&dev->h_list); INIT_LIST_HEAD(&dev->node); + dev_set_name(&dev->dev, "input%ld", + (unsigned long) atomic_inc_return(&input_no) - 1); + __module_get(THIS_MODULE); } @@ -2019,7 +2024,6 @@ static void devm_input_device_unregister(struct device *dev, void *res) */ int input_register_device(struct input_dev *dev) { - static atomic_t input_no = ATOMIC_INIT(0); struct input_devres *devres = NULL; struct input_handler *handler; unsigned int packet_size; @@ -2059,7 +2063,6 @@ int input_register_device(struct input_dev *dev) * If delay and period are pre-set by the driver, then autorepeating * is handled by the driver itself and we don't do it in input.c. */ - init_timer(&dev->timer); if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) { dev->timer.data = (long) dev; dev->timer.function = input_repeat_key; @@ -2073,9 +2076,6 @@ int input_register_device(struct input_dev *dev) if (!dev->setkeycode) dev->setkeycode = input_default_setkeycode; - dev_set_name(&dev->dev, "input%ld", - (unsigned long) atomic_inc_return(&input_no) - 1); - error = device_add(&dev->dev); if (error) goto err_free_vals; diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 134c3b404a54..a2e758d27584 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -786,10 +786,17 @@ static int pxa27x_keypad_probe(struct platform_device *pdev) input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); input_set_capability(input_dev, EV_MSC, MSC_SCAN); - if (pdata) + if (pdata) { error = pxa27x_keypad_build_keycode(keypad); - else + } else { error = pxa27x_keypad_build_keycode_from_dt(keypad); + /* + * Data that we get from DT resides in dynamically + * allocated memory so we need to update our pdata + * pointer. + */ + pdata = keypad->pdata; + } if (error) { dev_err(&pdev->dev, "failed to build keycode\n"); goto failed_put_clk; diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index 082684e7f390..9365535ba7f1 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -351,7 +351,9 @@ static void cm109_urb_irq_callback(struct urb *urb) if (status) { if (status == -ESHUTDOWN) return; - dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); + dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", + __func__, status); + goto out; } /* Special keys */ @@ -418,8 +420,12 @@ static void cm109_urb_ctl_callback(struct urb *urb) dev->ctl_data->byte[2], dev->ctl_data->byte[3]); - if (status) - dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status); + if (status) { + if (status == -ESHUTDOWN) + return; + dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n", + __func__, status); + } spin_lock(&dev->ctl_submit_lock); @@ -427,7 +433,7 @@ static void cm109_urb_ctl_callback(struct urb *urb) if (likely(!dev->shutdown)) { - if (dev->buzzer_pending) { + if (dev->buzzer_pending || status) { dev->buzzer_pending = 0; dev->ctl_urb_pending = 1; cm109_submit_buzz_toggle(dev); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 7c5d72a6a26a..83658472ad25 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -103,6 +103,7 @@ static const struct alps_model_info alps_model_data[] = { /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ { { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, + { { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_DUALPOINT }, /* Dell XT2 */ { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 78e4de42efaa..52c9ebf94729 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -223,21 +223,26 @@ static int i8042_flush(void) { unsigned long flags; unsigned char data, str; - int i = 0; + int count = 0; + int retval = 0; spin_lock_irqsave(&i8042_lock, flags); - while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) { - udelay(50); - data = i8042_read_data(); - i++; - dbg("%02x <- i8042 (flush, %s)\n", - data, str & I8042_STR_AUXDATA ? "aux" : "kbd"); + while ((str = i8042_read_status()) & I8042_STR_OBF) { + if (count++ < I8042_BUFFER_SIZE) { + udelay(50); + data = i8042_read_data(); + dbg("%02x <- i8042 (flush, %s)\n", + data, str & I8042_STR_AUXDATA ? "aux" : "kbd"); + } else { + retval = -EIO; + break; + } } spin_unlock_irqrestore(&i8042_lock, flags); - return i; + return retval; } /* @@ -849,7 +854,7 @@ static int __init i8042_check_aux(void) static int i8042_controller_check(void) { - if (i8042_flush() == I8042_BUFFER_SIZE) { + if (i8042_flush()) { pr_err("No controller found\n"); return -ENODEV; } diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 79b69ea47f74..e53416a4d7f3 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -1031,6 +1031,7 @@ static void wacom_destroy_leds(struct wacom *wacom) } static enum power_supply_property wacom_battery_props[] = { + POWER_SUPPLY_PROP_SCOPE, POWER_SUPPLY_PROP_CAPACITY }; @@ -1042,6 +1043,9 @@ static int wacom_battery_get_property(struct power_supply *psy, int ret = 0; switch (psp) { + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_DEVICE; + break; case POWER_SUPPLY_PROP_CAPACITY: val->intval = wacom->wacom_wac.battery_capacity * 100 / 31; diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index b2aa503c16b1..c59b797eeafa 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -2054,6 +2054,12 @@ static const struct wacom_features wacom_features_0x101 = static const struct wacom_features wacom_features_0x10D = { "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x10E = + { "Wacom ISDv4 10E", WACOM_PKGLEN_MTTPC, 27760, 15694, 255, + 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x10F = + { "Wacom ISDv4 10F", WACOM_PKGLEN_MTTPC, 27760, 15694, 255, + 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x4001 = { "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2248,6 +2254,8 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x100) }, { USB_DEVICE_WACOM(0x101) }, { USB_DEVICE_WACOM(0x10D) }, + { USB_DEVICE_WACOM(0x10E) }, + { USB_DEVICE_WACOM(0x10F) }, { USB_DEVICE_WACOM(0x300) }, { USB_DEVICE_WACOM(0x301) }, { USB_DEVICE_WACOM(0x304) }, diff --git a/drivers/md/md.c b/drivers/md/md.c index adf4d7e1d5e1..561a65f82e26 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8111,6 +8111,7 @@ static int md_set_badblocks(struct badblocks *bb, sector_t s, int sectors, u64 *p; int lo, hi; int rv = 1; + unsigned long flags; if (bb->shift < 0) /* badblocks are disabled */ @@ -8125,7 +8126,7 @@ static int md_set_badblocks(struct badblocks *bb, sector_t s, int sectors, sectors = next - s; } - write_seqlock_irq(&bb->lock); + write_seqlock_irqsave(&bb->lock, flags); p = bb->page; lo = 0; @@ -8241,7 +8242,7 @@ static int md_set_badblocks(struct badblocks *bb, sector_t s, int sectors, bb->changed = 1; if (!acknowledged) bb->unacked_exist = 1; - write_sequnlock_irq(&bb->lock); + write_sequnlock_irqrestore(&bb->lock, flags); return rv; } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index d60412c7f995..aacf6bf352d8 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1479,6 +1479,7 @@ static int raid1_spare_active(struct mddev *mddev) } } if (rdev + && rdev->recovery_offset == MaxSector && !test_bit(Faulty, &rdev->flags) && !test_and_set_bit(In_sync, &rdev->flags)) { count++; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index df7b0a06b0ea..73dc8a377522 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1782,6 +1782,7 @@ static int raid10_spare_active(struct mddev *mddev) } sysfs_notify_dirent_safe(tmp->replacement->sysfs_state); } else if (tmp->rdev + && tmp->rdev->recovery_offset == MaxSector && !test_bit(Faulty, &tmp->rdev->flags) && !test_and_set_bit(In_sync, &tmp->rdev->flags)) { count++; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 7ff4f252ca1a..f8b906843926 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -778,6 +778,12 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) bi->bi_io_vec[0].bv_len = STRIPE_SIZE; bi->bi_io_vec[0].bv_offset = 0; bi->bi_size = STRIPE_SIZE; + /* + * If this is discard request, set bi_vcnt 0. We don't + * want to confuse SCSI because SCSI will replace payload + */ + if (rw & REQ_DISCARD) + bi->bi_vcnt = 0; if (rrdev) set_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags); @@ -816,6 +822,12 @@ static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s) rbi->bi_io_vec[0].bv_len = STRIPE_SIZE; rbi->bi_io_vec[0].bv_offset = 0; rbi->bi_size = STRIPE_SIZE; + /* + * If this is discard request, set bi_vcnt 0. We don't + * want to confuse SCSI because SCSI will replace payload + */ + if (rw & REQ_DISCARD) + rbi->bi_vcnt = 0; if (conf->mddev->gendisk) trace_block_bio_remap(bdev_get_queue(rbi->bi_bdev), rbi, disk_devt(conf->mddev->gendisk), @@ -2910,6 +2922,14 @@ static void handle_stripe_clean_event(struct r5conf *conf, } /* now that discard is done we can proceed with any sync */ clear_bit(STRIPE_DISCARD, &sh->state); + /* + * SCSI discard will change some bio fields and the stripe has + * no updated data, so remove it from hash list and the stripe + * will be reinitialized + */ + spin_lock_irq(&conf->device_lock); + remove_hash(sh); + spin_unlock_irq(&conf->device_lock); if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state)) set_bit(STRIPE_HANDLE, &sh->state); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 59ab0692f0b9..a9830ff8e3f3 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -349,7 +349,7 @@ static int legacy_set_geometry(struct gpmi_nand_data *this) int common_nfc_set_geometry(struct gpmi_nand_data *this) { - return set_geometry_by_ecc_info(this) ? 0 : legacy_set_geometry(this); + return legacy_set_geometry(this); } struct dma_chan *get_dma_chan(struct gpmi_nand_data *this) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index dd03dfdfb0d6..c28d4e29af1a 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1320,7 +1320,12 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) for (cs = 0; cs < pdata->num_cs; cs++) { struct mtd_info *mtd = info->host[cs]->mtd; - mtd->name = pdev->name; + /* + * The mtd name matches the one used in 'mtdparts' kernel + * parameter. This name cannot be changed or otherwise + * user's mtd partitions configuration would get broken. + */ + mtd->name = "pxa3xx_nand-0"; info->cs = cs; ret = pxa3xx_nand_scan(mtd); if (ret) { diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index a668cd491cb3..e3fc07cf2f62 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -814,9 +814,6 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota) msg_ctrl_save = priv->read_reg(priv, C_CAN_IFACE(MSGCTRL_REG, 0)); - if (msg_ctrl_save & IF_MCONT_EOB) - return num_rx_pkts; - if (msg_ctrl_save & IF_MCONT_MSGLST) { c_can_handle_lost_msg_obj(dev, 0, msg_obj); num_rx_pkts++; @@ -824,6 +821,9 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota) continue; } + if (msg_ctrl_save & IF_MCONT_EOB) + return num_rx_pkts; + if (!(msg_ctrl_save & IF_MCONT_NEWDAT)) continue; diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 3b9546588240..4b2d5ed62b11 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -1544,9 +1544,9 @@ static int kvaser_usb_init_one(struct usb_interface *intf, return 0; } -static void kvaser_usb_get_endpoints(const struct usb_interface *intf, - struct usb_endpoint_descriptor **in, - struct usb_endpoint_descriptor **out) +static int kvaser_usb_get_endpoints(const struct usb_interface *intf, + struct usb_endpoint_descriptor **in, + struct usb_endpoint_descriptor **out) { const struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; @@ -1557,12 +1557,18 @@ static void kvaser_usb_get_endpoints(const struct usb_interface *intf, for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; - if (usb_endpoint_is_bulk_in(endpoint)) + if (!*in && usb_endpoint_is_bulk_in(endpoint)) *in = endpoint; - if (usb_endpoint_is_bulk_out(endpoint)) + if (!*out && usb_endpoint_is_bulk_out(endpoint)) *out = endpoint; + + /* use first bulk endpoint for in and out */ + if (*in && *out) + return 0; } + + return -ENODEV; } static int kvaser_usb_probe(struct usb_interface *intf, @@ -1576,8 +1582,8 @@ static int kvaser_usb_probe(struct usb_interface *intf, if (!dev) return -ENOMEM; - kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out); - if (!dev->bulk_in || !dev->bulk_out) { + err = kvaser_usb_get_endpoints(intf, &dev->bulk_in, &dev->bulk_out); + if (err) { dev_err(&intf->dev, "Cannot get usb endpoint(s)"); return err; } diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index a98778e3af84..e2aa09ce6af7 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -252,25 +252,33 @@ static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac, struct bgmac_slot_info *slot) { struct device *dma_dev = bgmac->core->dma_dev; + struct sk_buff *skb; + dma_addr_t dma_addr; struct bgmac_rx_header *rx; /* Alloc skb */ - slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE); - if (!slot->skb) + skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE); + if (!skb) return -ENOMEM; /* Poison - if everything goes fine, hardware will overwrite it */ - rx = (struct bgmac_rx_header *)slot->skb->data; + rx = (struct bgmac_rx_header *)skb->data; rx->len = cpu_to_le16(0xdead); rx->flags = cpu_to_le16(0xbeef); /* Map skb for the DMA */ - slot->dma_addr = dma_map_single(dma_dev, slot->skb->data, - BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dma_dev, slot->dma_addr)) { + dma_addr = dma_map_single(dma_dev, skb->data, + BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(dma_dev, dma_addr)) { bgmac_err(bgmac, "DMA mapping error\n"); + dev_kfree_skb(skb); return -ENOMEM; } + + /* Update the slot */ + slot->skb = skb; + slot->dma_addr = dma_addr; + if (slot->dma_addr & 0xC0000000) bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 6e46cff5236d..dcafbda3e5be 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2545,10 +2545,6 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) } } - /* Allocated memory for FW statistics */ - if (bnx2x_alloc_fw_stats_mem(bp)) - LOAD_ERROR_EXIT(bp, load_error0); - /* need to be done after alloc mem, since it's self adjusting to amount * of memory available for RSS queues */ @@ -2558,6 +2554,10 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) LOAD_ERROR_EXIT(bp, load_error0); } + /* Allocated memory for FW statistics */ + if (bnx2x_alloc_fw_stats_mem(bp)) + LOAD_ERROR_EXIT(bp, load_error0); + /* request pf to initialize status blocks */ if (IS_VF(bp)) { rc = bnx2x_vfpf_init(bp); @@ -2812,8 +2812,8 @@ load_error1: if (IS_PF(bp)) bnx2x_clear_pf_load(bp); load_error0: - bnx2x_free_fp_mem(bp); bnx2x_free_fw_stats_mem(bp); + bnx2x_free_fp_mem(bp); bnx2x_free_mem(bp); return rc; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 71fffad94aff..0216d592d0ce 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -2018,6 +2018,8 @@ failed: void bnx2x_iov_remove_one(struct bnx2x *bp) { + int vf_idx; + /* if SRIOV is not enabled there's nothing to do */ if (!IS_SRIOV(bp)) return; @@ -2026,6 +2028,18 @@ void bnx2x_iov_remove_one(struct bnx2x *bp) pci_disable_sriov(bp->pdev); DP(BNX2X_MSG_IOV, "sriov disabled\n"); + /* disable access to all VFs */ + for (vf_idx = 0; vf_idx < bp->vfdb->sriov.total; vf_idx++) { + bnx2x_pretend_func(bp, + HW_VF_HANDLE(bp, + bp->vfdb->sriov.first_vf_in_pf + + vf_idx)); + DP(BNX2X_MSG_IOV, "disabling internal access for vf %d\n", + bp->vfdb->sriov.first_vf_in_pf + vf_idx); + bnx2x_vf_enable_internal(bp, 0); + bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); + } + /* free vf database */ __bnx2x_iov_free_vfdb(bp); } @@ -3197,7 +3211,7 @@ int bnx2x_enable_sriov(struct bnx2x *bp) * the "acquire" messages to appear on the VF PF channel. */ DP(BNX2X_MSG_IOV, "about to call enable sriov\n"); - pci_disable_sriov(bp->pdev); + bnx2x_disable_sriov(bp); rc = pci_enable_sriov(bp->pdev, req_vfs); if (rc) { BNX2X_ERR("pci_enable_sriov failed with %d\n", rc); diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c index 9c89dc8fe105..632b318eb38a 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c @@ -1599,7 +1599,8 @@ static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb, flits = skb_transport_offset(skb) / 8; sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl; sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb), - skb->tail - skb->transport_header, + skb_tail_pointer(skb) - + skb_transport_header(skb), adap->pdev); if (need_skb_unmap()) { setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits); diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 2c88ac295eea..f4825db5d179 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -840,6 +840,16 @@ int be_load_fw(struct be_adapter *adapter, u8 *func); bool be_is_wol_supported(struct be_adapter *adapter); bool be_pause_supported(struct be_adapter *adapter); u32 be_get_fw_log_level(struct be_adapter *adapter); + +static inline int fw_major_num(const char *fw_ver) +{ + int fw_major = 0; + + sscanf(fw_ver, "%d.", &fw_major); + + return fw_major; +} + int be_update_queues(struct be_adapter *adapter); int be_poll(struct napi_struct *napi, int budget); diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 8080a1a5cee7..741d3bff5ae7 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3379,6 +3379,12 @@ static int be_setup(struct be_adapter *adapter) be_cmd_get_fw_ver(adapter, adapter->fw_ver, adapter->fw_on_flash); + if (BE2_chip(adapter) && fw_major_num(adapter->fw_ver) < 4) { + dev_err(dev, "Firmware on card is old(%s), IRQs may not work.", + adapter->fw_ver); + dev_err(dev, "Please upgrade firmware to version >= 4.0\n"); + } + if (adapter->vlans_added) be_vid_config(adapter); diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c index dac564c25440..e7847510eda2 100644 --- a/drivers/net/ethernet/ibm/emac/mal.c +++ b/drivers/net/ethernet/ibm/emac/mal.c @@ -263,7 +263,9 @@ static inline void mal_schedule_poll(struct mal_instance *mal) { if (likely(napi_schedule_prep(&mal->napi))) { MAL_DBG2(mal, "schedule_poll" NL); + spin_lock(&mal->lock); mal_disable_eob_irq(mal); + spin_unlock(&mal->lock); __napi_schedule(&mal->napi); } else MAL_DBG2(mal, "already in poll" NL); @@ -442,15 +444,13 @@ static int mal_poll(struct napi_struct *napi, int budget) if (unlikely(mc->ops->peek_rx(mc->dev) || test_bit(MAL_COMMAC_RX_STOPPED, &mc->flags))) { MAL_DBG2(mal, "rotting packet" NL); - if (napi_reschedule(napi)) - mal_disable_eob_irq(mal); - else - MAL_DBG2(mal, "already in poll list" NL); - - if (budget > 0) - goto again; - else + if (!napi_reschedule(napi)) goto more_work; + + spin_lock_irqsave(&mal->lock, flags); + mal_disable_eob_irq(mal); + spin_unlock_irqrestore(&mal->lock, flags); + goto again; } mc->ops->poll_tx(mc->dev); } diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 735765c21c95..ae8eb4c4fb6c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -1691,7 +1691,7 @@ static void mlx4_master_deactivate_admin_state(struct mlx4_priv *priv, int slave vp_oper->vlan_idx = NO_INDX; } if (NO_INDX != vp_oper->mac_idx) { - __mlx4_unregister_mac(&priv->dev, port, vp_oper->mac_idx); + __mlx4_unregister_mac(&priv->dev, port, vp_oper->state.mac); vp_oper->mac_idx = NO_INDX; } } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index a126bdf27952..a44b9395b37a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2276,9 +2276,9 @@ int qlcnic_83xx_get_nic_info(struct qlcnic_adapter *adapter, temp = (cmd.rsp.arg[8] & 0x7FFE0000) >> 17; npar_info->max_linkspeed_reg_offset = temp; } - if (npar_info->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) - memcpy(ahw->extra_capability, &cmd.rsp.arg[16], - sizeof(ahw->extra_capability)); + + memcpy(ahw->extra_capability, &cmd.rsp.arg[16], + sizeof(ahw->extra_capability)); out: qlcnic_free_mbx_args(&cmd); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 73e72eb83bdf..6f7f60c09f07 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -785,8 +785,6 @@ void qlcnic_82xx_config_intr_coalesce(struct qlcnic_adapter *adapter) #define QLCNIC_ENABLE_IPV4_LRO 1 #define QLCNIC_ENABLE_IPV6_LRO 2 -#define QLCNIC_NO_DEST_IPV4_CHECK (1 << 8) -#define QLCNIC_NO_DEST_IPV6_CHECK (2 << 8) int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable) { @@ -806,11 +804,10 @@ int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int enable) word = 0; if (enable) { - word = QLCNIC_ENABLE_IPV4_LRO | QLCNIC_NO_DEST_IPV4_CHECK; + word = QLCNIC_ENABLE_IPV4_LRO; if (adapter->ahw->extra_capability[0] & QLCNIC_FW_CAP2_HW_LRO_IPV6) - word |= QLCNIC_ENABLE_IPV6_LRO | - QLCNIC_NO_DEST_IPV6_CHECK; + word |= QLCNIC_ENABLE_IPV6_LRO; } req.words[0] = cpu_to_le64(word); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index dcf4a4e7ce23..b97e4a0079d1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1133,7 +1133,10 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter) if (err == -EIO) return err; adapter->ahw->extra_capability[0] = temp; + } else { + adapter->ahw->extra_capability[0] = 0; } + adapter->ahw->max_mac_filters = nic_info.max_mac_filters; adapter->ahw->max_mtu = nic_info.max_mtu; @@ -2161,8 +2164,7 @@ void qlcnic_set_drv_version(struct qlcnic_adapter *adapter) else if (qlcnic_83xx_check(adapter)) fw_cmd = QLCNIC_CMD_83XX_SET_DRV_VER; - if ((ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) && - (ahw->extra_capability[0] & QLCNIC_FW_CAPABILITY_SET_DRV_VER)) + if (ahw->extra_capability[0] & QLCNIC_FW_CAPABILITY_SET_DRV_VER) qlcnic_fw_cmd_set_drv_version(adapter, fw_cmd); } diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index a8ef4c4b94be..ba2f5e710af1 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -312,6 +312,7 @@ static ssize_t store_enabled(struct netconsole_target *nt, const char *buf, size_t count) { + unsigned long flags; int enabled; int err; @@ -326,9 +327,7 @@ static ssize_t store_enabled(struct netconsole_target *nt, return -EINVAL; } - mutex_lock(&nt->mutex); if (enabled) { /* 1 */ - /* * Skip netpoll_parse_options() -- all the attributes are * already configured via configfs. Just print them out. @@ -336,19 +335,22 @@ static ssize_t store_enabled(struct netconsole_target *nt, netpoll_print_options(&nt->np); err = netpoll_setup(&nt->np); - if (err) { - mutex_unlock(&nt->mutex); + if (err) return err; - } - - pr_info("network logging started\n"); + pr_info("netconsole: network logging started\n"); } else { /* 0 */ + /* We need to disable the netconsole before cleaning it up + * otherwise we might end up in write_msg() with + * nt->np.dev == NULL and nt->enabled == 1 + */ + spin_lock_irqsave(&target_list_lock, flags); + nt->enabled = 0; + spin_unlock_irqrestore(&target_list_lock, flags); netpoll_cleanup(&nt->np); } nt->enabled = enabled; - mutex_unlock(&nt->mutex); return strnlen(buf, count); } @@ -559,8 +561,10 @@ static ssize_t netconsole_target_attr_store(struct config_item *item, struct netconsole_target_attr *na = container_of(attr, struct netconsole_target_attr, attr); + mutex_lock(&nt->mutex); if (na->store) ret = na->store(nt, buf, count); + mutex_unlock(&nt->mutex); return ret; } diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 846cc19c04f2..8e8d0fcd4979 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -78,7 +78,6 @@ #define AX_MEDIUM_STATUS_MODE 0x22 #define AX_MEDIUM_GIGAMODE 0x01 #define AX_MEDIUM_FULL_DUPLEX 0x02 - #define AX_MEDIUM_ALWAYS_ONE 0x04 #define AX_MEDIUM_EN_125MHZ 0x08 #define AX_MEDIUM_RXFLOW_CTRLEN 0x10 #define AX_MEDIUM_TXFLOW_CTRLEN 0x20 @@ -1065,8 +1064,8 @@ static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf) /* Configure default medium type => giga */ *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN | - AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE | - AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE; + AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX | + AX_MEDIUM_GIGAMODE; ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, tmp16); @@ -1225,7 +1224,7 @@ static int ax88179_link_reset(struct usbnet *dev) } mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN | - AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE; + AX_MEDIUM_RXFLOW_CTRLEN; ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS, 1, 1, &link_sts); @@ -1339,8 +1338,8 @@ static int ax88179_reset(struct usbnet *dev) /* Configure default medium type => giga */ *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN | - AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE | - AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE; + AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX | + AX_MEDIUM_GIGAMODE; ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE, 2, 2, tmp16); diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 113ee93dbb2e..656a02e28e26 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1160,11 +1160,6 @@ static int virtnet_cpu_callback(struct notifier_block *nfb, { struct virtnet_info *vi = container_of(nfb, struct virtnet_info, nb); - mutex_lock(&vi->config_lock); - - if (!vi->config_enable) - goto done; - switch(action & ~CPU_TASKS_FROZEN) { case CPU_ONLINE: case CPU_DOWN_FAILED: @@ -1178,8 +1173,6 @@ static int virtnet_cpu_callback(struct notifier_block *nfb, break; } -done: - mutex_unlock(&vi->config_lock); return NOTIFY_OK; } @@ -1747,6 +1740,8 @@ static int virtnet_freeze(struct virtio_device *vdev) struct virtnet_info *vi = vdev->priv; int i; + unregister_hotcpu_notifier(&vi->nb); + /* Prevent config work handler from accessing the device */ mutex_lock(&vi->config_lock); vi->config_enable = false; @@ -1795,6 +1790,10 @@ static int virtnet_restore(struct virtio_device *vdev) virtnet_set_queues(vi, vi->curr_queue_pairs); rtnl_unlock(); + err = register_hotcpu_notifier(&vi->nb); + if (err) + return err; + return 0; } #endif diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 5bbcb5e3ee0c..388ddf60a66d 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -148,10 +148,6 @@ static int enslave( struct net_device *, struct net_device * ); static int emancipate( struct net_device * ); #endif -#ifdef __i386__ -#define ASM_CRC 1 -#endif - static const char version[] = "Granch SBNI12 driver ver 5.0.1 Jun 22 2001 Denis I.Timofeev.\n"; @@ -1551,88 +1547,6 @@ __setup( "sbni=", sbni_setup ); /* -------------------------------------------------------------------------- */ -#ifdef ASM_CRC - -static u32 -calc_crc32( u32 crc, u8 *p, u32 len ) -{ - register u32 _crc; - _crc = crc; - - __asm__ __volatile__ ( - "xorl %%ebx, %%ebx\n" - "movl %2, %%esi\n" - "movl %3, %%ecx\n" - "movl $crc32tab, %%edi\n" - "shrl $2, %%ecx\n" - "jz 1f\n" - - ".align 4\n" - "0:\n" - "movb %%al, %%bl\n" - "movl (%%esi), %%edx\n" - "shrl $8, %%eax\n" - "xorb %%dl, %%bl\n" - "shrl $8, %%edx\n" - "xorl (%%edi,%%ebx,4), %%eax\n" - - "movb %%al, %%bl\n" - "shrl $8, %%eax\n" - "xorb %%dl, %%bl\n" - "shrl $8, %%edx\n" - "xorl (%%edi,%%ebx,4), %%eax\n" - - "movb %%al, %%bl\n" - "shrl $8, %%eax\n" - "xorb %%dl, %%bl\n" - "movb %%dh, %%dl\n" - "xorl (%%edi,%%ebx,4), %%eax\n" - - "movb %%al, %%bl\n" - "shrl $8, %%eax\n" - "xorb %%dl, %%bl\n" - "addl $4, %%esi\n" - "xorl (%%edi,%%ebx,4), %%eax\n" - - "decl %%ecx\n" - "jnz 0b\n" - - "1:\n" - "movl %3, %%ecx\n" - "andl $3, %%ecx\n" - "jz 2f\n" - - "movb %%al, %%bl\n" - "shrl $8, %%eax\n" - "xorb (%%esi), %%bl\n" - "xorl (%%edi,%%ebx,4), %%eax\n" - - "decl %%ecx\n" - "jz 2f\n" - - "movb %%al, %%bl\n" - "shrl $8, %%eax\n" - "xorb 1(%%esi), %%bl\n" - "xorl (%%edi,%%ebx,4), %%eax\n" - - "decl %%ecx\n" - "jz 2f\n" - - "movb %%al, %%bl\n" - "shrl $8, %%eax\n" - "xorb 2(%%esi), %%bl\n" - "xorl (%%edi,%%ebx,4), %%eax\n" - "2:\n" - : "=a" (_crc) - : "0" (_crc), "g" (p), "g" (len) - : "bx", "cx", "dx", "si", "di" - ); - - return _crc; -} - -#else /* ASM_CRC */ - static u32 calc_crc32( u32 crc, u8 *p, u32 len ) { @@ -1642,9 +1556,6 @@ calc_crc32( u32 crc, u8 *p, u32 len ) return crc; } -#endif /* ASM_CRC */ - - static u32 crc32tab[] __attribute__ ((aligned(8))) = { 0xD202EF8D, 0xA505DF1B, 0x3C0C8EA1, 0x4B0BBE37, 0xD56F2B94, 0xA2681B02, 0x3B614AB8, 0x4C667A2E, diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h index 55b8dec86233..08ae01b41c83 100644 --- a/drivers/net/xen-netback/common.h +++ b/drivers/net/xen-netback/common.h @@ -169,6 +169,7 @@ struct xenvif { unsigned long credit_usec; unsigned long remaining_credit; struct timer_list credit_timeout; + u64 credit_window_start; /* Statistics */ unsigned long rx_gso_checksum_fixup; diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index e4aa26748f80..b78ee10a956a 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -316,8 +316,7 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid, vif->credit_bytes = vif->remaining_credit = ~0UL; vif->credit_usec = 0UL; init_timer(&vif->credit_timeout); - /* Initialize 'expires' now: it's used to track the credit window. */ - vif->credit_timeout.expires = jiffies; + vif->credit_window_start = get_jiffies_64(); dev->netdev_ops = &xenvif_netdev_ops; dev->hw_features = NETIF_F_SG | diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 828fdab4f1a4..919b6509455c 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -1380,9 +1380,8 @@ static int checksum_setup(struct xenvif *vif, struct sk_buff *skb) static bool tx_credit_exceeded(struct xenvif *vif, unsigned size) { - unsigned long now = jiffies; - unsigned long next_credit = - vif->credit_timeout.expires + + u64 now = get_jiffies_64(); + u64 next_credit = vif->credit_window_start + msecs_to_jiffies(vif->credit_usec / 1000); /* Timer could already be pending in rare cases. */ @@ -1390,8 +1389,8 @@ static bool tx_credit_exceeded(struct xenvif *vif, unsigned size) return true; /* Passed the point where we can replenish credit? */ - if (time_after_eq(now, next_credit)) { - vif->credit_timeout.expires = now; + if (time_after_eq64(now, next_credit)) { + vif->credit_window_start = now; tx_add_credit(vif); } @@ -1403,6 +1402,7 @@ static bool tx_credit_exceeded(struct xenvif *vif, unsigned size) tx_credit_callback; mod_timer(&vif->credit_timeout, next_credit); + vif->credit_window_start = next_credit; return true; } diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index be12fbfcae10..1ea75236a15f 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -552,9 +552,8 @@ static void __ref enable_slot(struct acpiphp_slot *slot) struct acpiphp_func *func; int max, pass; LIST_HEAD(add_list); - int nr_found; - nr_found = acpiphp_rescan_slot(slot); + acpiphp_rescan_slot(slot); max = acpiphp_max_busnr(bus); for (pass = 0; pass < 2; pass++) { list_for_each_entry(dev, &bus->devices, bus_list) { @@ -574,9 +573,6 @@ static void __ref enable_slot(struct acpiphp_slot *slot) } } __pci_bus_assign_resources(bus, &add_list, NULL); - /* Nothing more to do here if there are no new devices on this bus. */ - if (!nr_found && (slot->flags & SLOT_ENABLED)) - return; acpiphp_sanitize_bus(bus); acpiphp_set_hpp_values(bus); diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index feab3a5e50b5..757eb0716d45 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -696,7 +696,7 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter) while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, pci_device)) != NULL) { - struct blogic_adapter *adapter = adapter; + struct blogic_adapter *host_adapter = adapter; struct blogic_adapter_info adapter_info; enum blogic_isa_ioport mod_ioaddr_req; unsigned char bus; @@ -744,9 +744,9 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter) known and enabled, note that the particular Standard ISA I/O Address should not be probed. */ - adapter->io_addr = io_addr; - blogic_intreset(adapter); - if (blogic_cmd(adapter, BLOGIC_INQ_PCI_INFO, NULL, 0, + host_adapter->io_addr = io_addr; + blogic_intreset(host_adapter); + if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0, &adapter_info, sizeof(adapter_info)) == sizeof(adapter_info)) { if (adapter_info.isa_port < 6) @@ -762,7 +762,7 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter) I/O Address assigned at system initialization. */ mod_ioaddr_req = BLOGIC_IO_DISABLE; - blogic_cmd(adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req, + blogic_cmd(host_adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req, sizeof(mod_ioaddr_req), NULL, 0); /* For the first MultiMaster Host Adapter enumerated, @@ -779,12 +779,12 @@ static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter) fetch_localram.offset = BLOGIC_AUTOSCSI_BASE + 45; fetch_localram.count = sizeof(autoscsi_byte45); - blogic_cmd(adapter, BLOGIC_FETCH_LOCALRAM, + blogic_cmd(host_adapter, BLOGIC_FETCH_LOCALRAM, &fetch_localram, sizeof(fetch_localram), &autoscsi_byte45, sizeof(autoscsi_byte45)); - blogic_cmd(adapter, BLOGIC_GET_BOARD_ID, NULL, 0, &id, - sizeof(id)); + blogic_cmd(host_adapter, BLOGIC_GET_BOARD_ID, NULL, 0, + &id, sizeof(id)); if (id.fw_ver_digit1 == '5') force_scan_order = autoscsi_byte45.force_scan_order; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 408a42ef787a..f0d432c139d0 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -771,6 +771,8 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) { struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg); } diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 2ef497ebadc0..ee5c1833eb73 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -20,7 +20,7 @@ * | Device Discovery | 0x2095 | 0x2020-0x2022, | * | | | 0x2011-0x2012, | * | | | 0x2016 | - * | Queue Command and IO tracing | 0x3058 | 0x3006-0x300b | + * | Queue Command and IO tracing | 0x3059 | 0x3006-0x300b | * | | | 0x3027-0x3028 | * | | | 0x303d-0x3041 | * | | | 0x302d,0x3033 | diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index df1b30ba938c..ff9c86b1a0d8 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1957,6 +1957,15 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) que = MSW(sts->handle); req = ha->req_q_map[que]; + /* Check for invalid queue pointer */ + if (req == NULL || + que >= find_first_zero_bit(ha->req_qid_map, ha->max_req_queues)) { + ql_dbg(ql_dbg_io, vha, 0x3059, + "Invalid status handle (0x%x): Bad req pointer. req=%p, " + "que=%u.\n", sts->handle, req, que); + return; + } + /* Validate handle. */ if (handle < req->num_outstanding_cmds) sp = req->outstanding_cmds[handle]; diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e62d17d41d4e..5693f6d7eddb 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2854,6 +2854,7 @@ static void sd_probe_async(void *data, async_cookie_t cookie) gd->events |= DISK_EVENT_MEDIA_CHANGE; } + blk_pm_runtime_init(sdp->request_queue, dev); add_disk(gd); if (sdkp->capacity) sd_dif_config_host(sdkp); @@ -2862,7 +2863,6 @@ static void sd_probe_async(void *data, async_cookie_t cookie) sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n", sdp->removable ? "removable " : ""); - blk_pm_runtime_init(sdp->request_queue, dev); scsi_autopm_put_device(sdp); put_device(&sdkp->dev); } diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 5cbc4bb1b395..df5e961484e1 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -105,8 +105,11 @@ static int scatter_elem_sz_prev = SG_SCATTER_SZ; static int sg_add(struct device *, struct class_interface *); static void sg_remove(struct device *, struct class_interface *); +static DEFINE_SPINLOCK(sg_open_exclusive_lock); + static DEFINE_IDR(sg_index_idr); -static DEFINE_RWLOCK(sg_index_lock); +static DEFINE_RWLOCK(sg_index_lock); /* Also used to lock + file descriptor list for device */ static struct class_interface sg_interface = { .add_dev = sg_add, @@ -143,7 +146,8 @@ typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */ } Sg_request; typedef struct sg_fd { /* holds the state of a file descriptor */ - struct list_head sfd_siblings; /* protected by sfd_lock of device */ + /* sfd_siblings is protected by sg_index_lock */ + struct list_head sfd_siblings; struct sg_device *parentdp; /* owning device */ wait_queue_head_t read_wait; /* queue read until command done */ rwlock_t rq_list_lock; /* protect access to list in req_arr */ @@ -166,12 +170,13 @@ typedef struct sg_fd { /* holds the state of a file descriptor */ typedef struct sg_device { /* holds the state of each scsi generic device */ struct scsi_device *device; + wait_queue_head_t o_excl_wait; /* queue open() when O_EXCL in use */ int sg_tablesize; /* adapter's max scatter-gather table size */ u32 index; /* device index number */ - spinlock_t sfd_lock; /* protect file descriptor list for device */ + /* sfds is protected by sg_index_lock */ struct list_head sfds; - struct rw_semaphore o_sem; /* exclude open should hold this rwsem */ volatile char detached; /* 0->attached, 1->detached pending removal */ + /* exclude protected by sg_open_exclusive_lock */ char exclude; /* opened for exclusive access */ char sgdebug; /* 0->off, 1->sense, 9->dump dev, 10-> all devs */ struct gendisk *disk; @@ -220,14 +225,35 @@ static int sg_allow_access(struct file *filp, unsigned char *cmd) return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE); } +static int get_exclude(Sg_device *sdp) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&sg_open_exclusive_lock, flags); + ret = sdp->exclude; + spin_unlock_irqrestore(&sg_open_exclusive_lock, flags); + return ret; +} + +static int set_exclude(Sg_device *sdp, char val) +{ + unsigned long flags; + + spin_lock_irqsave(&sg_open_exclusive_lock, flags); + sdp->exclude = val; + spin_unlock_irqrestore(&sg_open_exclusive_lock, flags); + return val; +} + static int sfds_list_empty(Sg_device *sdp) { unsigned long flags; int ret; - spin_lock_irqsave(&sdp->sfd_lock, flags); + read_lock_irqsave(&sg_index_lock, flags); ret = list_empty(&sdp->sfds); - spin_unlock_irqrestore(&sdp->sfd_lock, flags); + read_unlock_irqrestore(&sg_index_lock, flags); return ret; } @@ -239,6 +265,7 @@ sg_open(struct inode *inode, struct file *filp) struct request_queue *q; Sg_device *sdp; Sg_fd *sfp; + int res; int retval; nonseekable_open(inode, filp); @@ -267,52 +294,54 @@ sg_open(struct inode *inode, struct file *filp) goto error_out; } - if ((flags & O_EXCL) && (O_RDONLY == (flags & O_ACCMODE))) { - retval = -EPERM; /* Can't lock it with read only access */ - goto error_out; - } - if (flags & O_NONBLOCK) { - if (flags & O_EXCL) { - if (!down_write_trylock(&sdp->o_sem)) { - retval = -EBUSY; - goto error_out; - } - } else { - if (!down_read_trylock(&sdp->o_sem)) { - retval = -EBUSY; - goto error_out; - } + if (flags & O_EXCL) { + if (O_RDONLY == (flags & O_ACCMODE)) { + retval = -EPERM; /* Can't lock it with read only access */ + goto error_out; + } + if (!sfds_list_empty(sdp) && (flags & O_NONBLOCK)) { + retval = -EBUSY; + goto error_out; + } + res = wait_event_interruptible(sdp->o_excl_wait, + ((!sfds_list_empty(sdp) || get_exclude(sdp)) ? 0 : set_exclude(sdp, 1))); + if (res) { + retval = res; /* -ERESTARTSYS because signal hit process */ + goto error_out; + } + } else if (get_exclude(sdp)) { /* some other fd has an exclusive lock on dev */ + if (flags & O_NONBLOCK) { + retval = -EBUSY; + goto error_out; + } + res = wait_event_interruptible(sdp->o_excl_wait, !get_exclude(sdp)); + if (res) { + retval = res; /* -ERESTARTSYS because signal hit process */ + goto error_out; } - } else { - if (flags & O_EXCL) - down_write(&sdp->o_sem); - else - down_read(&sdp->o_sem); } - /* Since write lock is held, no need to check sfd_list */ - if (flags & O_EXCL) - sdp->exclude = 1; /* used by release lock */ - + if (sdp->detached) { + retval = -ENODEV; + goto error_out; + } if (sfds_list_empty(sdp)) { /* no existing opens on this device */ sdp->sgdebug = 0; q = sdp->device->request_queue; sdp->sg_tablesize = queue_max_segments(q); } - sfp = sg_add_sfp(sdp, dev); - if (!IS_ERR(sfp)) + if ((sfp = sg_add_sfp(sdp, dev))) filp->private_data = sfp; - /* retval is already provably zero at this point because of the - * check after retval = scsi_autopm_get_device(sdp->device)) - */ else { - retval = PTR_ERR(sfp); - if (flags & O_EXCL) { - sdp->exclude = 0; /* undo if error */ - up_write(&sdp->o_sem); - } else - up_read(&sdp->o_sem); + set_exclude(sdp, 0); /* undo if error */ + wake_up_interruptible(&sdp->o_excl_wait); + } + retval = -ENOMEM; + goto error_out; + } + retval = 0; error_out: + if (retval) { scsi_autopm_put_device(sdp->device); sdp_put: scsi_device_put(sdp->device); @@ -329,18 +358,13 @@ sg_release(struct inode *inode, struct file *filp) { Sg_device *sdp; Sg_fd *sfp; - int excl; if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp))) return -ENXIO; SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name)); - excl = sdp->exclude; - sdp->exclude = 0; - if (excl) - up_write(&sdp->o_sem); - else - up_read(&sdp->o_sem); + set_exclude(sdp, 0); + wake_up_interruptible(&sdp->o_excl_wait); scsi_autopm_put_device(sdp->device); kref_put(&sfp->f_ref, sg_remove_sfp); @@ -1391,9 +1415,8 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) disk->first_minor = k; sdp->disk = disk; sdp->device = scsidp; - spin_lock_init(&sdp->sfd_lock); INIT_LIST_HEAD(&sdp->sfds); - init_rwsem(&sdp->o_sem); + init_waitqueue_head(&sdp->o_excl_wait); sdp->sg_tablesize = queue_max_segments(q); sdp->index = k; kref_init(&sdp->d_ref); @@ -1526,13 +1549,11 @@ static void sg_remove(struct device *cl_dev, struct class_interface *cl_intf) /* Need a write lock to set sdp->detached. */ write_lock_irqsave(&sg_index_lock, iflags); - spin_lock(&sdp->sfd_lock); sdp->detached = 1; list_for_each_entry(sfp, &sdp->sfds, sfd_siblings) { wake_up_interruptible(&sfp->read_wait); kill_fasync(&sfp->async_qp, SIGPOLL, POLL_HUP); } - spin_unlock(&sdp->sfd_lock); write_unlock_irqrestore(&sg_index_lock, iflags); sysfs_remove_link(&scsidp->sdev_gendev.kobj, "generic"); @@ -2043,7 +2064,7 @@ sg_add_sfp(Sg_device * sdp, int dev) sfp = kzalloc(sizeof(*sfp), GFP_ATOMIC | __GFP_NOWARN); if (!sfp) - return ERR_PTR(-ENOMEM); + return NULL; init_waitqueue_head(&sfp->read_wait); rwlock_init(&sfp->rq_list_lock); @@ -2057,13 +2078,9 @@ sg_add_sfp(Sg_device * sdp, int dev) sfp->cmd_q = SG_DEF_COMMAND_Q; sfp->keep_orphan = SG_DEF_KEEP_ORPHAN; sfp->parentdp = sdp; - spin_lock_irqsave(&sdp->sfd_lock, iflags); - if (sdp->detached) { - spin_unlock_irqrestore(&sdp->sfd_lock, iflags); - return ERR_PTR(-ENODEV); - } + write_lock_irqsave(&sg_index_lock, iflags); list_add_tail(&sfp->sfd_siblings, &sdp->sfds); - spin_unlock_irqrestore(&sdp->sfd_lock, iflags); + write_unlock_irqrestore(&sg_index_lock, iflags); SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: sfp=0x%p\n", sfp)); if (unlikely(sg_big_buff != def_reserved_size)) sg_big_buff = def_reserved_size; @@ -2113,9 +2130,10 @@ static void sg_remove_sfp(struct kref *kref) struct sg_device *sdp = sfp->parentdp; unsigned long iflags; - spin_lock_irqsave(&sdp->sfd_lock, iflags); + write_lock_irqsave(&sg_index_lock, iflags); list_del(&sfp->sfd_siblings); - spin_unlock_irqrestore(&sdp->sfd_lock, iflags); + write_unlock_irqrestore(&sg_index_lock, iflags); + wake_up_interruptible(&sdp->o_excl_wait); INIT_WORK(&sfp->ew.work, sg_remove_sfp_usercontext); schedule_work(&sfp->ew.work); @@ -2502,7 +2520,7 @@ static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v) return 0; } -/* must be called while holding sg_index_lock and sfd_lock */ +/* must be called while holding sg_index_lock */ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp) { int k, m, new_interface, blen, usg; @@ -2587,26 +2605,22 @@ static int sg_proc_seq_show_debug(struct seq_file *s, void *v) read_lock_irqsave(&sg_index_lock, iflags); sdp = it ? sg_lookup_dev(it->index) : NULL; - if (sdp) { - spin_lock(&sdp->sfd_lock); - if (!list_empty(&sdp->sfds)) { - struct scsi_device *scsidp = sdp->device; + if (sdp && !list_empty(&sdp->sfds)) { + struct scsi_device *scsidp = sdp->device; - seq_printf(s, " >>> device=%s ", sdp->disk->disk_name); - if (sdp->detached) - seq_printf(s, "detached pending close "); - else - seq_printf - (s, "scsi%d chan=%d id=%d lun=%d em=%d", - scsidp->host->host_no, - scsidp->channel, scsidp->id, - scsidp->lun, - scsidp->host->hostt->emulated); - seq_printf(s, " sg_tablesize=%d excl=%d\n", - sdp->sg_tablesize, sdp->exclude); - sg_proc_debug_helper(s, sdp); - } - spin_unlock(&sdp->sfd_lock); + seq_printf(s, " >>> device=%s ", sdp->disk->disk_name); + if (sdp->detached) + seq_printf(s, "detached pending close "); + else + seq_printf + (s, "scsi%d chan=%d id=%d lun=%d em=%d", + scsidp->host->host_no, + scsidp->channel, scsidp->id, + scsidp->lun, + scsidp->host->hostt->emulated); + seq_printf(s, " sg_tablesize=%d excl=%d\n", + sdp->sg_tablesize, get_exclude(sdp)); + sg_proc_debug_helper(s, sdp); } read_unlock_irqrestore(&sg_index_lock, iflags); return 0; diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c index f91bc1fdd895..639ba96adb36 100644 --- a/drivers/staging/bcm/Bcmchar.c +++ b/drivers/staging/bcm/Bcmchar.c @@ -1960,6 +1960,7 @@ cntrlEnd: BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Called IOCTL_BCM_GET_DEVICE_DRIVER_INFO\n"); + memset(&DevInfo, 0, sizeof(DevInfo)); DevInfo.MaxRDMBufferSize = BUFFER_4K; DevInfo.u32DSDStartOffset = EEPROM_CALPARAM_START; DevInfo.u32RxAlignmentCorrection = 0; diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c index 6ccb64fb0786..6ce0af9977d8 100644 --- a/drivers/staging/ozwpan/ozcdev.c +++ b/drivers/staging/ozwpan/ozcdev.c @@ -155,6 +155,9 @@ static ssize_t oz_cdev_write(struct file *filp, const char __user *buf, struct oz_app_hdr *app_hdr; struct oz_serial_ctx *ctx; + if (count > sizeof(ei->data) - sizeof(*elt) - sizeof(*app_hdr)) + return -EINVAL; + spin_lock_bh(&g_cdev.lock); pd = g_cdev.active_pd; if (pd) diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c index 23db32f07fd5..a10cdb17038b 100644 --- a/drivers/staging/sb105x/sb_pci_mp.c +++ b/drivers/staging/sb105x/sb_pci_mp.c @@ -1063,7 +1063,7 @@ static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg) static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt) { - struct serial_icounter_struct icount; + struct serial_icounter_struct icount = {}; struct sb_uart_icount cnow; struct sb_uart_port *port = state->port; diff --git a/drivers/staging/wlags49_h2/wl_priv.c b/drivers/staging/wlags49_h2/wl_priv.c index c97e0e154d28..7e10dcdc3090 100644 --- a/drivers/staging/wlags49_h2/wl_priv.c +++ b/drivers/staging/wlags49_h2/wl_priv.c @@ -570,6 +570,7 @@ int wvlan_uil_put_info(struct uilreq *urq, struct wl_private *lp) ltv_t *pLtv; bool_t ltvAllocated = FALSE; ENCSTRCT sEncryption; + size_t len; #ifdef USE_WDS hcf_16 hcfPort = HCF_PORT_0; @@ -686,7 +687,8 @@ int wvlan_uil_put_info(struct uilreq *urq, struct wl_private *lp) break; case CFG_CNF_OWN_NAME: memset(lp->StationName, 0, sizeof(lp->StationName)); - memcpy((void *)lp->StationName, (void *)&pLtv->u.u8[2], (size_t)pLtv->u.u16[0]); + len = min_t(size_t, pLtv->u.u16[0], sizeof(lp->StationName)); + strlcpy(lp->StationName, &pLtv->u.u8[2], len); pLtv->u.u16[0] = CNV_INT_TO_LITTLE(pLtv->u.u16[0]); break; case CFG_CNF_LOAD_BALANCING: @@ -1783,6 +1785,7 @@ int wvlan_set_station_nickname(struct net_device *dev, { struct wl_private *lp = wl_priv(dev); unsigned long flags; + size_t len; int ret = 0; /*------------------------------------------------------------------------*/ @@ -1793,8 +1796,8 @@ int wvlan_set_station_nickname(struct net_device *dev, wl_lock(lp, &flags); memset(lp->StationName, 0, sizeof(lp->StationName)); - - memcpy(lp->StationName, extra, wrqu->data.length); + len = min_t(size_t, wrqu->data.length, sizeof(lp->StationName)); + strlcpy(lp->StationName, extra, len); /* Commit the adapter parameters */ wl_apply(lp); diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 551c96ca60ac..0f199f6a0738 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -134,10 +134,10 @@ static int pscsi_pmode_enable_hba(struct se_hba *hba, unsigned long mode_flag) * pSCSI Host ID and enable for phba mode */ sh = scsi_host_lookup(phv->phv_host_id); - if (IS_ERR(sh)) { + if (!sh) { pr_err("pSCSI: Unable to locate SCSI Host for" " phv_host_id: %d\n", phv->phv_host_id); - return PTR_ERR(sh); + return -EINVAL; } phv->phv_lld_host = sh; @@ -515,10 +515,10 @@ static int pscsi_configure_device(struct se_device *dev) sh = phv->phv_lld_host; } else { sh = scsi_host_lookup(pdv->pdv_host_id); - if (IS_ERR(sh)) { + if (!sh) { pr_err("pSCSI: Unable to locate" " pdv_host_id: %d\n", pdv->pdv_host_id); - return PTR_ERR(sh); + return -EINVAL; } } } else { diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c index 4714c6f8da4b..d9b92b2c524d 100644 --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -263,6 +263,11 @@ sbc_setup_write_same(struct se_cmd *cmd, unsigned char *flags, struct sbc_ops *o sectors, cmd->se_dev->dev_attrib.max_write_same_len); return TCM_INVALID_CDB_FIELD; } + /* We always have ANC_SUP == 0 so setting ANCHOR is always an error */ + if (flags[0] & 0x10) { + pr_warn("WRITE SAME with ANCHOR not supported\n"); + return TCM_INVALID_CDB_FIELD; + } /* * Special case for WRITE_SAME w/ UNMAP=1 that ends up getting * translated into block discard requests within backend code. diff --git a/drivers/target/target_core_xcopy.c b/drivers/target/target_core_xcopy.c index 3da4fd10b9f8..474cd44fac14 100644 --- a/drivers/target/target_core_xcopy.c +++ b/drivers/target/target_core_xcopy.c @@ -82,6 +82,9 @@ static int target_xcopy_locate_se_dev_e4(struct se_cmd *se_cmd, struct xcopy_op mutex_lock(&g_device_mutex); list_for_each_entry(se_dev, &g_device_list, g_dev_node) { + if (!se_dev->dev_attrib.emulate_3pc) + continue; + memset(&tmp_dev_wwn[0], 0, XCOPY_NAA_IEEE_REGEX_LEN); target_xcopy_gen_naa_ieee(se_dev, &tmp_dev_wwn[0]); @@ -357,6 +360,7 @@ struct xcopy_pt_cmd { struct se_cmd se_cmd; struct xcopy_op *xcopy_op; struct completion xpt_passthrough_sem; + unsigned char sense_buffer[TRANSPORT_SENSE_BUFFER]; }; static struct se_port xcopy_pt_port; @@ -675,7 +679,8 @@ static int target_xcopy_issue_pt_cmd(struct xcopy_pt_cmd *xpt_cmd) pr_debug("target_xcopy_issue_pt_cmd(): SCSI status: 0x%02x\n", se_cmd->scsi_status); - return 0; + + return (se_cmd->scsi_status) ? -EINVAL : 0; } static int target_xcopy_read_source( @@ -708,7 +713,7 @@ static int target_xcopy_read_source( (unsigned long long)src_lba, src_sectors, length); transport_init_se_cmd(se_cmd, &xcopy_pt_tfo, NULL, length, - DMA_FROM_DEVICE, 0, NULL); + DMA_FROM_DEVICE, 0, &xpt_cmd->sense_buffer[0]); xop->src_pt_cmd = xpt_cmd; rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, src_dev, &cdb[0], @@ -768,7 +773,7 @@ static int target_xcopy_write_destination( (unsigned long long)dst_lba, dst_sectors, length); transport_init_se_cmd(se_cmd, &xcopy_pt_tfo, NULL, length, - DMA_TO_DEVICE, 0, NULL); + DMA_TO_DEVICE, 0, &xpt_cmd->sense_buffer[0]); xop->dst_pt_cmd = xpt_cmd; rc = target_xcopy_setup_pt_cmd(xpt_cmd, xop, dst_dev, &cdb[0], @@ -884,30 +889,42 @@ out: sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) { + struct se_device *dev = se_cmd->se_dev; struct xcopy_op *xop = NULL; unsigned char *p = NULL, *seg_desc; unsigned int list_id, list_id_usage, sdll, inline_dl, sa; + sense_reason_t ret = TCM_INVALID_PARAMETER_LIST; int rc; unsigned short tdll; + if (!dev->dev_attrib.emulate_3pc) { + pr_err("EXTENDED_COPY operation explicitly disabled\n"); + return TCM_UNSUPPORTED_SCSI_OPCODE; + } + sa = se_cmd->t_task_cdb[1] & 0x1f; if (sa != 0x00) { pr_err("EXTENDED_COPY(LID4) not supported\n"); return TCM_UNSUPPORTED_SCSI_OPCODE; } + xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL); + if (!xop) { + pr_err("Unable to allocate xcopy_op\n"); + return TCM_OUT_OF_RESOURCES; + } + xop->xop_se_cmd = se_cmd; + p = transport_kmap_data_sg(se_cmd); if (!p) { pr_err("transport_kmap_data_sg() failed in target_do_xcopy\n"); + kfree(xop); return TCM_OUT_OF_RESOURCES; } list_id = p[0]; - if (list_id != 0x00) { - pr_err("XCOPY with non zero list_id: 0x%02x\n", list_id); - goto out; - } - list_id_usage = (p[1] & 0x18); + list_id_usage = (p[1] & 0x18) >> 3; + /* * Determine TARGET DESCRIPTOR LIST LENGTH + SEGMENT DESCRIPTOR LIST LENGTH */ @@ -920,13 +937,6 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) goto out; } - xop = kzalloc(sizeof(struct xcopy_op), GFP_KERNEL); - if (!xop) { - pr_err("Unable to allocate xcopy_op\n"); - goto out; - } - xop->xop_se_cmd = se_cmd; - pr_debug("Processing XCOPY with list_id: 0x%02x list_id_usage: 0x%02x" " tdll: %hu sdll: %u inline_dl: %u\n", list_id, list_id_usage, tdll, sdll, inline_dl); @@ -935,6 +945,17 @@ sense_reason_t target_do_xcopy(struct se_cmd *se_cmd) if (rc <= 0) goto out; + if (xop->src_dev->dev_attrib.block_size != + xop->dst_dev->dev_attrib.block_size) { + pr_err("XCOPY: Non matching src_dev block_size: %u + dst_dev" + " block_size: %u currently unsupported\n", + xop->src_dev->dev_attrib.block_size, + xop->dst_dev->dev_attrib.block_size); + xcopy_pt_undepend_remotedev(xop); + ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + goto out; + } + pr_debug("XCOPY: Processed %d target descriptors, length: %u\n", rc, rc * XCOPY_TARGET_DESC_LEN); seg_desc = &p[16]; @@ -957,7 +978,7 @@ out: if (p) transport_kunmap_data_sg(se_cmd); kfree(xop); - return TCM_INVALID_CDB_FIELD; + return ret; } static sense_reason_t target_rcr_operating_parameters(struct se_cmd *se_cmd) diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index d067285a2d20..6b0f75eac8a2 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1499,7 +1499,7 @@ static void atmel_set_ops(struct uart_port *port) /* * Get ip name usart or uart */ -static int atmel_get_ip_name(struct uart_port *port) +static void atmel_get_ip_name(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); int name = UART_GET_IP_NAME(port); @@ -1518,10 +1518,7 @@ static int atmel_get_ip_name(struct uart_port *port) atmel_port->is_usart = false; } else { dev_err(port->dev, "Not supported ip name, set to uart\n"); - return -EINVAL; } - - return 0; } /* @@ -2405,9 +2402,7 @@ static int atmel_serial_probe(struct platform_device *pdev) /* * Get port name of usart or uart */ - ret = atmel_get_ip_name(&port->uart); - if (ret < 0) - goto err_add_port; + atmel_get_ip_name(&port->uart); return 0; diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index ba475632c5fa..0e808cf91d97 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -642,16 +642,29 @@ static int uio_mmap_physical(struct vm_area_struct *vma) { struct uio_device *idev = vma->vm_private_data; int mi = uio_find_mem_index(vma); + struct uio_mem *mem; if (mi < 0) return -EINVAL; + mem = idev->info->mem + mi; - vma->vm_ops = &uio_physical_vm_ops; + if (vma->vm_end - vma->vm_start > mem->size) + return -EINVAL; + vma->vm_ops = &uio_physical_vm_ops; vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + /* + * We cannot use the vm_iomap_memory() helper here, + * because vma->vm_pgoff is the map index we looked + * up above in uio_find_mem_index(), rather than an + * actual page offset into the mmap. + * + * So we just do the physical mmap without a page + * offset. + */ return remap_pfn_range(vma, vma->vm_start, - idev->info->mem[mi].addr >> PAGE_SHIFT, + mem->addr >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot); } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c45f9c0a1b34..b21d553c245b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -904,6 +904,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, /* Crucible Devices */ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1b8af461b522..a7019d1e3058 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1307,3 +1307,9 @@ * Manufacturer: Crucible Technologies */ #define FTDI_CT_COMET_PID 0x8e08 + +/* + * Product: Z3X Box + * Manufacturer: Smart GSM Team + */ +#define FTDI_Z3X_PID 0x0011 diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index bedf8e47713b..1e6de4cd079d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -4,11 +4,6 @@ * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2003 IBM Corp. * - * Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com> - * - fixes, improvements and documentation for the baud rate encoding methods - * Copyright (C) 2013 Reinhard Max <max@suse.de> - * - fixes and improvements for the divisor based baud rate encoding method - * * Original driver for 2.2.x by anonymous * * This program is free software; you can redistribute it and/or @@ -134,18 +129,10 @@ MODULE_DEVICE_TABLE(usb, id_table); enum pl2303_type { - type_0, /* H version ? */ - type_1, /* H version ? */ - HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */ - HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */ - TB, /* TB version */ - HX_CLONE, /* Cheap and less functional clone of the HX chip */ + type_0, /* don't know the difference between type 0 and */ + type_1, /* type 1, until someone from prolific tells us... */ + HX, /* HX version of the pl2303 chip */ }; -/* - * NOTE: don't know the difference between type 0 and type 1, - * until someone from Prolific tells us... - * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants - */ struct pl2303_serial_private { enum pl2303_type type; @@ -185,7 +172,6 @@ static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; enum pl2303_type type = type_0; - char *type_str = "unknown (treating as type_0)"; unsigned char *buf; spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); @@ -198,53 +184,15 @@ static int pl2303_startup(struct usb_serial *serial) return -ENOMEM; } - if (serial->dev->descriptor.bDeviceClass == 0x02) { + if (serial->dev->descriptor.bDeviceClass == 0x02) type = type_0; - type_str = "type_0"; - } else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) { - /* - * NOTE: The bcdDevice version is the only difference between - * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB - */ - if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) { - /* Check if the device is a clone */ - pl2303_vendor_read(0x9494, 0, serial, buf); - /* - * NOTE: Not sure if this read is really needed. - * The HX returns 0x00, the clone 0x02, but the Windows - * driver seems to ignore the value and continues. - */ - pl2303_vendor_write(0x0606, 0xaa, serial); - pl2303_vendor_read(0x8686, 0, serial, buf); - if (buf[0] != 0xaa) { - type = HX_CLONE; - type_str = "X/HX clone (limited functionality)"; - } else { - type = HX_TA; - type_str = "X/HX/TA"; - } - pl2303_vendor_write(0x0606, 0x00, serial); - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x400) { - type = HXD_EA_RA_SA; - type_str = "HXD/EA/RA/SA"; - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x500) { - type = TB; - type_str = "TB"; - } else { - dev_info(&serial->interface->dev, - "unknown/unsupported device type\n"); - kfree(spriv); - kfree(buf); - return -ENODEV; - } - } else if (serial->dev->descriptor.bDeviceClass == 0x00 - || serial->dev->descriptor.bDeviceClass == 0xFF) { + else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) + type = HX; + else if (serial->dev->descriptor.bDeviceClass == 0x00) type = type_1; - type_str = "type_1"; - } - dev_dbg(&serial->interface->dev, "device type: %s\n", type_str); + else if (serial->dev->descriptor.bDeviceClass == 0xFF) + type = type_1; + dev_dbg(&serial->interface->dev, "device type: %d\n", type); spriv->type = type; usb_set_serial_data(serial, spriv); @@ -259,10 +207,10 @@ static int pl2303_startup(struct usb_serial *serial) pl2303_vendor_read(0x8383, 0, serial, buf); pl2303_vendor_write(0, 1, serial); pl2303_vendor_write(1, 0, serial); - if (type == type_0 || type == type_1) - pl2303_vendor_write(2, 0x24, serial); - else + if (type == HX) pl2303_vendor_write(2, 0x44, serial); + else + pl2303_vendor_write(2, 0x24, serial); kfree(buf); return 0; @@ -316,174 +264,65 @@ static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) return retval; } -static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type, - u8 buf[4]) +static void pl2303_encode_baudrate(struct tty_struct *tty, + struct usb_serial_port *port, + u8 buf[4]) { - /* - * NOTE: Only the values defined in baud_sup are supported ! - * => if unsupported values are set, the PL2303 uses 9600 baud instead - * => HX clones just don't work at unsupported baud rates < 115200 baud, - * for baud rates > 115200 they run at 115200 baud - */ const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, - 4800, 7200, 9600, 14400, 19200, 28800, 38400, - 57600, 115200, 230400, 460800, 614400, 921600, - 1228800, 2457600, 3000000, 6000000, 12000000 }; + 4800, 7200, 9600, 14400, 19200, 28800, 38400, + 57600, 115200, 230400, 460800, 500000, 614400, + 921600, 1228800, 2457600, 3000000, 6000000 }; + + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + int baud; + int i; + /* - * NOTE: With the exception of type_0/1 devices, the following - * additional baud rates are supported (tested with HX rev. 3A only): - * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800, - * 403200, 806400. (*: not HX and HX clones) - * - * Maximum values: HXD, TB: 12000000; HX, TA: 6000000; - * type_0+1: 1228800; RA: 921600; HX clones, SA: 115200 - * - * As long as we are not using this encoding method for anything else - * than the type_0+1, HX and HX clone chips, there is no point in - * complicating the code to support them. + * NOTE: Only the values defined in baud_sup are supported! + * => if unsupported values are set, the PL2303 seems to use + * 9600 baud (at least my PL2303X always does) */ - int i; + baud = tty_get_baud_rate(tty); + dev_dbg(&port->dev, "baud requested = %d\n", baud); + if (!baud) + return; /* Set baudrate to nearest supported value */ for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) { if (baud_sup[i] > baud) break; } + if (i == ARRAY_SIZE(baud_sup)) baud = baud_sup[i - 1]; else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1])) baud = baud_sup[i - 1]; else baud = baud_sup[i]; - /* Respect the chip type specific baud rate limits */ - /* - * FIXME: as long as we don't know how to distinguish between the - * HXD, EA, RA, and SA chip variants, allow the max. value of 12M. - */ - if (type == HX_TA) - baud = min_t(int, baud, 6000000); - else if (type == type_0 || type == type_1) - baud = min_t(int, baud, 1228800); - else if (type == HX_CLONE) - baud = min_t(int, baud, 115200); - /* Direct (standard) baud rate encoding method */ - put_unaligned_le32(baud, buf); - - return baud; -} -static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type, - u8 buf[4]) -{ - /* - * Divisor based baud rate encoding method - * - * NOTE: HX clones do NOT support this method. - * It's not clear if the type_0/1 chips support it. - * - * divisor = 12MHz * 32 / baudrate = 2^A * B - * - * with - * - * A = buf[1] & 0x0e - * B = buf[0] + (buf[1] & 0x01) << 8 - * - * Special cases: - * => 8 < B < 16: device seems to work not properly - * => B <= 8: device uses the max. value B = 512 instead - */ - unsigned int A, B; + /* type_0, type_1 only support up to 1228800 baud */ + if (spriv->type != HX) + baud = min_t(int, baud, 1228800); - /* - * NOTE: The Windows driver allows maximum baud rates of 110% of the - * specified maximium value. - * Quick tests with early (2004) HX (rev. A) chips suggest, that even - * higher baud rates (up to the maximum of 24M baud !) are working fine, - * but that should really be tested carefully in "real life" scenarios - * before removing the upper limit completely. - * Baud rates smaller than the specified 75 baud are definitely working - * fine. - */ - if (type == type_0 || type == type_1) - baud = min_t(int, baud, 1228800 * 1.1); - else if (type == HX_TA) - baud = min_t(int, baud, 6000000 * 1.1); - else if (type == HXD_EA_RA_SA) - /* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */ - /* - * FIXME: as long as we don't know how to distinguish between - * these chip variants, allow the max. of these values - */ - baud = min_t(int, baud, 12000000 * 1.1); - else if (type == TB) - baud = min_t(int, baud, 12000000 * 1.1); - /* Determine factors A and B */ - A = 0; - B = 12000000 * 32 / baud; /* 12MHz */ - B <<= 1; /* Add one bit for rounding */ - while (B > (512 << 1) && A <= 14) { - A += 2; - B >>= 2; - } - if (A > 14) { /* max. divisor = min. baudrate reached */ - A = 14; - B = 512; - /* => ~45.78 baud */ + if (baud <= 115200) { + put_unaligned_le32(baud, buf); } else { - B = (B + 1) >> 1; /* Round the last bit */ - } - /* Handle special cases */ - if (B == 512) - B = 0; /* also: 1 to 8 */ - else if (B < 16) /* - * NOTE: With the current algorithm this happens - * only for A=0 and means that the min. divisor - * (respectively: the max. baudrate) is reached. + * Apparently the formula for higher speeds is: + * baudrate = 12M * 32 / (2^buf[1]) / buf[0] */ - B = 16; /* => 24 MBaud */ - /* Encode the baud rate */ - buf[3] = 0x80; /* Select divisor encoding method */ - buf[2] = 0; - buf[1] = (A & 0x0e); /* A */ - buf[1] |= ((B & 0x100) >> 8); /* MSB of B */ - buf[0] = B & 0xff; /* 8 LSBs of B */ - /* Calculate the actual/resulting baud rate */ - if (B <= 8) - B = 512; - baud = 12000000 * 32 / ((1 << A) * B); - - return baud; -} - -static void pl2303_encode_baudrate(struct tty_struct *tty, - struct usb_serial_port *port, - enum pl2303_type type, - u8 buf[4]) -{ - int baud; + unsigned tmp = 12000000 * 32 / baud; + buf[3] = 0x80; + buf[2] = 0; + buf[1] = (tmp >= 256); + while (tmp >= 256) { + tmp >>= 2; + buf[1] <<= 1; + } + buf[0] = tmp; + } - baud = tty_get_baud_rate(tty); - dev_dbg(&port->dev, "baud requested = %d\n", baud); - if (!baud) - return; - /* - * There are two methods for setting/encoding the baud rate - * 1) Direct method: encodes the baud rate value directly - * => supported by all chip types - * 2) Divisor based method: encodes a divisor to a base value (12MHz*32) - * => not supported by HX clones (and likely type_0/1 chips) - * - * NOTE: Although the divisor based baud rate encoding method is much - * more flexible, some of the standard baud rate values can not be - * realized exactly. But the difference is very small (max. 0.2%) and - * the device likely uses the same baud rate generator for both methods - * so that there is likley no difference. - */ - if (type == type_0 || type == type_1 || type == HX_CLONE) - baud = pl2303_baudrate_encode_direct(baud, type, buf); - else - baud = pl2303_baudrate_encode_divisor(baud, type, buf); /* Save resulting baud rate */ tty_encode_baud_rate(tty, baud, baud); dev_dbg(&port->dev, "baud set = %d\n", baud); @@ -540,8 +379,8 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "data bits = %d\n", buf[6]); } - /* For reference: buf[0]:buf[3] baud rate value */ - pl2303_encode_baudrate(tty, port, spriv->type, buf); + /* For reference buf[0]:buf[3] baud rate value */ + pl2303_encode_baudrate(tty, port, &buf[0]); /* For reference buf[4]=0 is 1 stop bits */ /* For reference buf[4]=1 is 1.5 stop bits */ @@ -618,10 +457,10 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); if (C_CRTSCTS(tty)) { - if (spriv->type == type_0 || spriv->type == type_1) - pl2303_vendor_write(0x0, 0x41, serial); - else + if (spriv->type == HX) pl2303_vendor_write(0x0, 0x61, serial); + else + pl2303_vendor_write(0x0, 0x41, serial); } else { pl2303_vendor_write(0x0, 0x0, serial); } @@ -658,7 +497,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; - if (spriv->type == type_0 || spriv->type == type_1) { + if (spriv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); } else { @@ -833,7 +672,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 0, NULL, 0, 100); - /* NOTE: HX clones don't support sending breaks, -EPIPE is returned */ if (result) dev_err(&port->dev, "error sending break = %d\n", result); } diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c index ce5221fa393a..e663921eebb6 100644 --- a/drivers/vhost/scsi.c +++ b/drivers/vhost/scsi.c @@ -1056,7 +1056,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq) if (data_direction != DMA_NONE) { ret = vhost_scsi_map_iov_to_sgl(cmd, &vq->iov[data_first], data_num, - data_direction == DMA_TO_DEVICE); + data_direction == DMA_FROM_DEVICE); if (unlikely(ret)) { vq_err(vq, "Failed to map iov to sgl\n"); goto err_free; diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index a54ccdc4d661..22ad85242e5b 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -361,37 +361,13 @@ void au1100fb_fb_rotate(struct fb_info *fbi, int angle) int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) { struct au1100fb_device *fbdev; - unsigned int len; - unsigned long start=0, off; fbdev = to_au1100fb_device(fbi); - if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) { - return -EINVAL; - } - - start = fbdev->fb_phys & PAGE_MASK; - len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len); - - off = vma->vm_pgoff << PAGE_SHIFT; - - if ((vma->vm_end - vma->vm_start + off) > len) { - return -EINVAL; - } - - off += start; - vma->vm_pgoff = off >> PAGE_SHIFT; - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6 - if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot)) { - return -EAGAIN; - } - - return 0; + return vm_iomap_memory(vma, fbdev->fb_phys, fbdev->fb_len); } static struct fb_ops au1100fb_ops = diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c index 301224ecc950..1d02897d17f2 100644 --- a/drivers/video/au1200fb.c +++ b/drivers/video/au1200fb.c @@ -1233,34 +1233,13 @@ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi) * method mainly to allow the use of the TLB streaming flag (CCA=6) */ static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma) - { - unsigned int len; - unsigned long start=0, off; struct au1200fb_device *fbdev = info->par; - if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) { - return -EINVAL; - } - - start = fbdev->fb_phys & PAGE_MASK; - len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len); - - off = vma->vm_pgoff << PAGE_SHIFT; - - if ((vma->vm_end - vma->vm_start + off) > len) { - return -EINVAL; - } - - off += start; - vma->vm_pgoff = off >> PAGE_SHIFT; - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */ - return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); + return vm_iomap_memory(vma, fbdev->fb_phys, fbdev->fb_len); } static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata) |