diff options
| author | Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> | 2014-03-17 15:34:10 +0200 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2014-03-17 13:44:17 -0400 |
| commit | 36b10a7239ce0d384a54ab1053d83b3bbb26501b (patch) | |
| tree | bd8d9f61396c8408de41c8ae04784f971004220c /drivers | |
| parent | 2232abd59ae5801b20c1e8269a63515bac50d28d (diff) | |
| download | linux-36b10a7239ce0d384a54ab1053d83b3bbb26501b.tar.bz2 | |
wil6210: update target reset to support new HW
Support for new chip revision. Revision read from the
internal register, PCIE config's "revision id" register
do not indicate HW version properly
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/main.c | 29 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/pcie_bus.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/wil6210.h | 4 |
3 files changed, 34 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 4cc1b789bd1c..86444189a2ec 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -230,14 +230,22 @@ void wil_priv_deinit(struct wil6210_priv *wil) static void wil_target_reset(struct wil6210_priv *wil) { + int delay = 100; + u32 baud_rate; + u32 rev_id; + wil_dbg_misc(wil, "Resetting...\n"); + /* register read */ +#define R(a) ioread32(wil->csr + HOSTADDR(a)) /* register write */ #define W(a, v) iowrite32(v, wil->csr + HOSTADDR(a)) /* register set = read, OR, write */ #define S(a, v) iowrite32(ioread32(wil->csr + HOSTADDR(a)) | v, \ wil->csr + HOSTADDR(a)) + wil->hw_version = R(RGF_FW_REV_ID); + rev_id = wil->hw_version & 0xff; /* hpal_perst_from_pad_src_n_mask */ S(RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT(6)); /* car_perst_rst_src_n_mask */ @@ -257,11 +265,30 @@ static void wil_target_reset(struct wil6210_priv *wil) W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); W(RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x00000001); - W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080); + if (rev_id == 1) { + W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00000080); + } else { + W(RGF_LOS_COUNTER_CTL, BIT(6) | BIT(8)); + W(RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x00008000); + } W(RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0); + /* wait until device ready. Use baud rate */ + do { + msleep(1); + baud_rate = R(RGF_USER_SERIAL_BAUD_RATE); + if (delay-- < 0) { + wil_err(wil, "Reset not completed\n"); + return; + } + } while (baud_rate != 0x15e); + + if (rev_id == 2) + W(RGF_LOS_COUNTER_CTL, BIT(8)); + wil_dbg_misc(wil, "Reset completed\n"); +#undef R #undef W #undef S } diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index eeceab39cda2..d96e81131132 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -74,6 +74,8 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil) if (rc) goto release_irq; + wil_info(wil, "HW version: 0x%08x\n", wil->hw_version); + return 0; release_irq: diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index 11e0898bcffd..14f861cd295d 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -74,6 +74,9 @@ struct RGF_ICR { } __packed; /* registers - FW addresses */ +#define RGF_FW_REV_ID (0x880a8c) /* chip revision */ +#define RGF_USER_SERIAL_BAUD_RATE (0x880050) +#define RGF_LOS_COUNTER_CTL (0x882dc4) #define RGF_USER_USER_SCRATCH_PAD (0x8802bc) #define RGF_USER_USER_ICR (0x880b4c) /* struct RGF_ICR */ #define BIT_USER_USER_ICR_SW_INT_2 BIT(18) @@ -342,6 +345,7 @@ struct wil6210_priv { void __iomem *csr; ulong status; u32 fw_version; + u32 hw_version; u8 n_mids; /* number of additional MIDs as reported by FW */ /* profile */ u32 monitor_flags; |