Merge tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "CrOS EC:
   - Add EC host command support using rpmsg
   - Add new CrOS USB PD logging driver
   - Transfer spi messages at high priority
   - Add support to trace CrOS EC commands
   - Minor fixes and cleanups in protocol and debugfs

  Wilco EC:
   - Standardize Wilco EC mailbox interface
   - Add h1_gpio status to debugfs"

* tag 'tag-chrome-platform-for-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_proto: Add trace event to trace EC commands
  platform/chrome: cros_ec_debugfs: Use cros_ec_cmd_xfer_status helper
  platform/chrome: cros_ec: Add EC host command support using rpmsg
  platform/chrome: wilco_ec: Add h1_gpio status to debugfs
  platform/chrome: wilco_ec: Standardize mailbox interface
  platform/chrome: cros_ec_proto: check for NULL transfer function
  platform/chrome: Add CrOS USB PD logging driver
  platform/chrome: cros_ec_spi: Transfer messages at high priority
  platform/chrome: cros_ec_debugfs: no need to check return value of debugfs_create functions
  platform/chrome: cros_ec_debugfs: Remove dev_warn when console log is not supported

12 files changed, 948 insertions, 152 deletions

diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 9186d81a51cc..997317d2f2b9 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -59,6 +59,18 @@ config CROS_EC_I2C
 	  a checksum. Failing accesses will be retried three times to
 	  improve reliability.
 
+config CROS_EC_RPMSG
+	tristate "ChromeOS Embedded Controller (rpmsg)"
+	depends on MFD_CROS_EC && RPMSG && OF
+	help
+	  If you say Y here, you get support for talking to the ChromeOS EC
+	  through rpmsg. This uses a simple byte-level protocol with a
+	  checksum. Also since there's no addition EC-to-host interrupt, this
+	  use a byte in message to distinguish host event from host command.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_rpmsg.
+
 config CROS_EC_SPI
 	tristate "ChromeOS Embedded Controller (SPI)"
 	depends on MFD_CROS_EC && SPI
@@ -152,6 +164,18 @@ config CROS_EC_SYSFS
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_sysfs.
 
+config CROS_USBPD_LOGGER
+	tristate "Logging driver for USB PD charger"
+	depends on CHARGER_CROS_USBPD
+	default y
+	select RTC_LIB
+	help
+	  This option enables support for logging event data for the USB PD charger
+	  available in the Embedded Controller on ChromeOS systems.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_usbpd_logger.
+
 source "drivers/platform/chrome/wilco_ec/Kconfig"
 
 endif # CHROMEOS_PLATFORMS
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index 1e2f0029b597..1b2f1dcfcd5c 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -1,18 +1,23 @@
 # SPDX-License-Identifier: GPL-2.0
 
+# tell define_trace.h where to find the cros ec trace header
+CFLAGS_cros_ec_trace.o:=		-I$(src)
+
 obj-$(CONFIG_CHROMEOS_LAPTOP)		+= chromeos_laptop.o
 obj-$(CONFIG_CHROMEOS_PSTORE)		+= chromeos_pstore.o
 obj-$(CONFIG_CHROMEOS_TBMC)		+= chromeos_tbmc.o
 obj-$(CONFIG_CROS_EC_I2C)		+= cros_ec_i2c.o
+obj-$(CONFIG_CROS_EC_RPMSG)		+= cros_ec_rpmsg.o
 obj-$(CONFIG_CROS_EC_SPI)		+= cros_ec_spi.o
 cros_ec_lpcs-objs			:= cros_ec_lpc.o cros_ec_lpc_reg.o
 cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC)	+= cros_ec_lpc_mec.o
 obj-$(CONFIG_CROS_EC_LPC)		+= cros_ec_lpcs.o
-obj-$(CONFIG_CROS_EC_PROTO)		+= cros_ec_proto.o
+obj-$(CONFIG_CROS_EC_PROTO)		+= cros_ec_proto.o cros_ec_trace.o
 obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT)	+= cros_kbd_led_backlight.o
 obj-$(CONFIG_CROS_EC_LIGHTBAR)		+= cros_ec_lightbar.o
 obj-$(CONFIG_CROS_EC_VBC)		+= cros_ec_vbc.o
 obj-$(CONFIG_CROS_EC_DEBUGFS)		+= cros_ec_debugfs.o
 obj-$(CONFIG_CROS_EC_SYSFS)		+= cros_ec_sysfs.o
+obj-$(CONFIG_CROS_USBPD_LOGGER)		+= cros_usbpd_logger.o
 
 obj-$(CONFIG_WILCO_EC)			+= wilco_ec/
diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
index 2b8e8a01a739..4c2a27f6a6d0 100644
--- a/drivers/platform/chrome/cros_ec_debugfs.c
+++ b/drivers/platform/chrome/cros_ec_debugfs.c
@@ -72,15 +72,9 @@ static void cros_ec_console_log_work(struct work_struct *__work)
 	int buf_space;
 	int ret;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, &snapshot_msg);
-	if (ret < 0) {
-		dev_err(ec->dev, "EC communication failed\n");
-		goto resched;
-	}
-	if (snapshot_msg.result != EC_RES_SUCCESS) {
-		dev_err(ec->dev, "EC failed to snapshot the console log\n");
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, &snapshot_msg);
+	if (ret < 0)
 		goto resched;
-	}
 
 	/* Loop until we have read everything, or there's an error. */
 	mutex_lock(&debug_info->log_mutex);
@@ -95,16 +89,10 @@ static void cros_ec_console_log_work(struct work_struct *__work)
 
 		memset(read_params, '\0', sizeof(*read_params));
 		read_params->subcmd = CONSOLE_READ_RECENT;
-		ret = cros_ec_cmd_xfer(ec->ec_dev, debug_info->read_msg);
-		if (ret < 0) {
-			dev_err(ec->dev, "EC communication failed\n");
-			break;
-		}
-		if (debug_info->read_msg->result != EC_RES_SUCCESS) {
-			dev_err(ec->dev,
-				"EC failed to read the console log\n");
+		ret = cros_ec_cmd_xfer_status(ec->ec_dev,
+					      debug_info->read_msg);
+		if (ret < 0)
 			break;
-		}
 
 		/* If the buffer is empty, we're done here. */
 		if (ret == 0 || ec_buffer[0] == '\0')
@@ -290,9 +278,8 @@ static int ec_read_version_supported(struct cros_ec_dev *ec)
 	params->cmd = EC_CMD_CONSOLE_READ;
 	response = (struct ec_response_get_cmd_versions *)msg->data;
 
-	ret = cros_ec_cmd_xfer(ec->ec_dev, msg) >= 0 &&
-		msg->result == EC_RES_SUCCESS &&
-		(response->version_mask & EC_VER_MASK(1));
+	ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg) >= 0 &&
+	      response->version_mask & EC_VER_MASK(1);
 
 	kfree(msg);
 
@@ -306,11 +293,12 @@ static int cros_ec_create_console_log(struct cros_ec_debugfs *debug_info)
 	int read_params_size;
 	int read_response_size;
 
-	if (!ec_read_version_supported(ec)) {
-		dev_warn(ec->dev,
-			"device does not support reading the console log\n");
+	/*
+	 * If the console log feature is not supported return silently and
+	 * don't create the console_log entry.
+	 */
+	if (!ec_read_version_supported(ec))
 		return 0;
-	}
 
 	buf = devm_kzalloc(ec->dev, LOG_SIZE, GFP_KERNEL);
 	if (!buf)
@@ -336,12 +324,8 @@ static int cros_ec_create_console_log(struct cros_ec_debugfs *debug_info)
 	mutex_init(&debug_info->log_mutex);
 	init_waitqueue_head(&debug_info->log_wq);
 
-	if (!debugfs_create_file("console_log",
-				 S_IFREG | 0444,
-				 debug_info->dir,
-				 debug_info,
-				 &cros_ec_console_log_fops))
-		return -ENOMEM;
+	debugfs_create_file("console_log", S_IFREG | 0444, debug_info->dir,
+			    debug_info, &cros_ec_console_log_fops);
 
 	INIT_DELAYED_WORK(&debug_info->log_poll_work,
 			  cros_ec_console_log_work);
@@ -375,9 +359,8 @@ static int cros_ec_create_panicinfo(struct cros_ec_debugfs *debug_info)
 	msg->command = EC_CMD_GET_PANIC_INFO;
 	msg->insize = insize;
 
-	ret = cros_ec_cmd_xfer(ec_dev, msg);
+	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
 	if (ret < 0) {
-		dev_warn(debug_info->ec->dev, "Cannot read panicinfo.\n");
 		ret = 0;
 		goto free;
 	}
@@ -389,13 +372,8 @@ static int cros_ec_create_panicinfo(struct cros_ec_debugfs *debug_info)
 	debug_info->panicinfo_blob.data = msg->data;
 	debug_info->panicinfo_blob.size = ret;
 
-	if (!debugfs_create_blob("panicinfo",
-				 S_IFREG | 0444,
-				 debug_info->dir,
-				 &debug_info->panicinfo_blob)) {
-		ret = -ENOMEM;
-		goto free;
-	}
+	debugfs_create_blob("panicinfo", S_IFREG | 0444, debug_info->dir,
+			    &debug_info->panicinfo_blob);
 
 	return 0;
 
@@ -404,15 +382,6 @@ free:
 	return ret;
 }
 
-static int cros_ec_create_pdinfo(struct cros_ec_debugfs *debug_info)
-{
-	if (!debugfs_create_file("pdinfo", 0444, debug_info->dir, debug_info,
-				 &cros_ec_pdinfo_fops))
-		return -ENOMEM;
-
-	return 0;
-}
-
 static int cros_ec_debugfs_probe(struct platform_device *pd)
 {
 	struct cros_ec_dev *ec = dev_get_drvdata(pd->dev.parent);
@@ -427,8 +396,6 @@ static int cros_ec_debugfs_probe(struct platform_device *pd)
 
 	debug_info->ec = ec;
 	debug_info->dir = debugfs_create_dir(name, NULL);
-	if (!debug_info->dir)
-		return -ENOMEM;
 
 	ret = cros_ec_create_panicinfo(debug_info);
 	if (ret)
@@ -438,9 +405,8 @@ static int cros_ec_debugfs_probe(struct platform_device *pd)
 	if (ret)
 		goto remove_debugfs;
 
-	ret = cros_ec_create_pdinfo(debug_info);
-	if (ret)
-		goto remove_log;
+	debugfs_create_file("pdinfo", 0444, debug_info->dir, debug_info,
+			    &cros_ec_pdinfo_fops);
 
 	ec->debug_info = debug_info;
 
@@ -448,8 +414,6 @@ static int cros_ec_debugfs_probe(struct platform_device *pd)
 
 	return 0;
 
-remove_log:
-	cros_ec_cleanup_console_log(debug_info);
 remove_debugfs:
 	debugfs_remove_recursive(debug_info->dir);
 	return ret;
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 97a068dff192..171475862ede 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -10,6 +10,8 @@
 #include <linux/slab.h>
 #include <asm/unaligned.h>
 
+#include "cros_ec_trace.h"
+
 #define EC_COMMAND_RETRIES	50
 
 static int prepare_packet(struct cros_ec_device *ec_dev,
@@ -51,11 +53,24 @@ static int send_command(struct cros_ec_device *ec_dev,
 	int ret;
 	int (*xfer_fxn)(struct cros_ec_device *ec, struct cros_ec_command *msg);
 
+	trace_cros_ec_cmd(msg);
+
 	if (ec_dev->proto_version > 2)
 		xfer_fxn = ec_dev->pkt_xfer;
 	else
 		xfer_fxn = ec_dev->cmd_xfer;
 
+	if (!xfer_fxn) {
+		/*
+		 * This error can happen if a communication error happened and
+		 * the EC is trying to use protocol v2, on an underlying
+		 * communication mechanism that does not support v2.
+		 */
+		dev_err_once(ec_dev->dev,
+			     "missing EC transfer API, cannot send command\n");
+		return -EIO;
+	}
+
 	ret = (*xfer_fxn)(ec_dev, msg);
 	if (msg->result == EC_RES_IN_PROGRESS) {
 		int i;
diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
new file mode 100644
index 000000000000..5d3fb2abad1d
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_rpmsg.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2018 Google LLC.
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/rpmsg.h>
+#include <linux/slab.h>
+
+#define EC_MSG_TIMEOUT_MS	200
+#define HOST_COMMAND_MARK	1
+#define HOST_EVENT_MARK		2
+
+/**
+ * struct cros_ec_rpmsg_response - rpmsg message format from from EC.
+ *
+ * @type:	The type of message, should be either HOST_COMMAND_MARK or
+ *		HOST_EVENT_MARK, representing that the message is a response to
+ *		host command, or a host event.
+ * @data:	ec_host_response for host command.
+ */
+struct cros_ec_rpmsg_response {
+	u8 type;
+	u8 data[] __aligned(4);
+};
+
+/**
+ * struct cros_ec_rpmsg - information about a EC over rpmsg.
+ *
+ * @rpdev:	rpmsg device we are connected to
+ * @xfer_ack:	completion for host command transfer.
+ * @host_event_work:	Work struct for pending host event.
+ */
+struct cros_ec_rpmsg {
+	struct rpmsg_device *rpdev;
+	struct completion xfer_ack;
+	struct work_struct host_event_work;
+};
+
+/**
+ * cros_ec_cmd_xfer_rpmsg - Transfer a message over rpmsg and receive the reply
+ *
+ * @ec_dev: ChromeOS EC device
+ * @ec_msg: Message to transfer
+ *
+ * This is only used for old EC proto version, and is not supported for this
+ * driver.
+ *
+ * Return: -EINVAL
+ */
+static int cros_ec_cmd_xfer_rpmsg(struct cros_ec_device *ec_dev,
+				  struct cros_ec_command *ec_msg)
+{
+	return -EINVAL;
+}
+
+/**
+ * cros_ec_pkt_xfer_rpmsg - Transfer a packet over rpmsg and receive the reply
+ *
+ * @ec_dev: ChromeOS EC device
+ * @ec_msg: Message to transfer
+ *
+ * Return: number of bytes of the reply on success or negative error code.
+ */
+static int cros_ec_pkt_xfer_rpmsg(struct cros_ec_device *ec_dev,
+				  struct cros_ec_command *ec_msg)
+{
+	struct cros_ec_rpmsg *ec_rpmsg = ec_dev->priv;
+	struct rpmsg_device *rpdev = ec_rpmsg->rpdev;
+	struct ec_host_response *response;
+	unsigned long timeout;
+	int len;
+	int ret;
+	u8 sum;
+	int i;
+
+	ec_msg->result = 0;
+	len = cros_ec_prepare_tx(ec_dev, ec_msg);
+	dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
+
+	reinit_completion(&ec_rpmsg->xfer_ack);
+	ret = rpmsg_send(rpdev->ept, ec_dev->dout, len);
+	if (ret) {
+		dev_err(ec_dev->dev, "rpmsg send failed\n");
+		return ret;
+	}
+
+	timeout = msecs_to_jiffies(EC_MSG_TIMEOUT_MS);
+	ret = wait_for_completion_timeout(&ec_rpmsg->xfer_ack, timeout);
+	if (!ret) {
+		dev_err(ec_dev->dev, "rpmsg send timeout\n");
+		return -EIO;
+	}
+
+	/* check response error code */
+	response = (struct ec_host_response *)ec_dev->din;
+	ec_msg->result = response->result;
+
+	ret = cros_ec_check_result(ec_dev, ec_msg);
+	if (ret)
+		goto exit;
+
+	if (response->data_len > ec_msg->insize) {
+		dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
+			response->data_len, ec_msg->insize);
+		ret = -EMSGSIZE;
+		goto exit;
+	}
+
+	/* copy response packet payload and compute checksum */
+	memcpy(ec_msg->data, ec_dev->din + sizeof(*response),
+	       response->data_len);
+
+	sum = 0;
+	for (i = 0; i < sizeof(*response) + response->data_len; i++)
+		sum += ec_dev->din[i];
+
+	if (sum) {
+		dev_err(ec_dev->dev, "bad packet checksum, calculated %x\n",
+			sum);
+		ret = -EBADMSG;
+		goto exit;
+	}
+
+	ret = response->data_len;
+exit:
+	if (ec_msg->command == EC_CMD_REBOOT_EC)
+		msleep(EC_REBOOT_DELAY_MS);
+
+	return ret;
+}
+
+static void
+cros_ec_rpmsg_host_event_function(struct work_struct *host_event_work)
+{
+	struct cros_ec_rpmsg *ec_rpmsg = container_of(host_event_work,
+						      struct cros_ec_rpmsg,
+						      host_event_work);
+	struct cros_ec_device *ec_dev = dev_get_drvdata(&ec_rpmsg->rpdev->dev);
+	bool wake_event = true;
+	int ret;
+
+	ret = cros_ec_get_next_event(ec_dev, &wake_event);
+
+	/*
+	 * Signal only if wake host events or any interrupt if
+	 * cros_ec_get_next_event() returned an error (default value for
+	 * wake_event is true)
+	 */
+	if (wake_event && device_may_wakeup(ec_dev->dev))
+		pm_wakeup_event(ec_dev->dev, 0);
+
+	if (ret > 0)
+		blocking_notifier_call_chain(&ec_dev->event_notifier,
+					     0, ec_dev);
+}
+
+static int cros_ec_rpmsg_callback(struct rpmsg_device *rpdev, void *data,
+				  int len, void *priv, u32 src)
+{
+	struct cros_ec_device *ec_dev = dev_get_drvdata(&rpdev->dev);
+	struct cros_ec_rpmsg *ec_rpmsg = ec_dev->priv;
+	struct cros_ec_rpmsg_response *resp;
+
+	if (!len) {
+		dev_warn(ec_dev->dev, "rpmsg received empty response");
+		return -EINVAL;
+	}
+
+	resp = data;
+	len -= offsetof(struct cros_ec_rpmsg_response, data);
+	if (resp->type == HOST_COMMAND_MARK) {
+		if (len > ec_dev->din_size) {
+			dev_warn(ec_dev->dev,
+				 "received length %d > din_size %d, truncating",
+				 len, ec_dev->din_size);
+			len = ec_dev->din_size;
+		}
+
+		memcpy(ec_dev->din, resp->data, len);
+		complete(&ec_rpmsg->xfer_ack);
+	} else if (resp->type == HOST_EVENT_MARK) {
+		schedule_work(&ec_rpmsg->host_event_work);
+	} else {
+		dev_warn(ec_dev->dev, "rpmsg received invalid type = %d",
+			 resp->type);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cros_ec_rpmsg_probe(struct rpmsg_device *rpdev)
+{
+	struct device *dev = &rpdev->dev;
+	struct cros_ec_rpmsg *ec_rpmsg;
+	struct cros_ec_device *ec_dev;
+
+	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+	if (!ec_dev)
+		return -ENOMEM;
+
+	ec_rpmsg = devm_kzalloc(dev, sizeof(*ec_rpmsg), GFP_KERNEL);
+	if (!ec_rpmsg)
+		return -ENOMEM;
+
+	ec_dev->dev = dev;
+	ec_dev->priv = ec_rpmsg;
+	ec_dev->cmd_xfer = cros_ec_cmd_xfer_rpmsg;
+	ec_dev->pkt_xfer = cros_ec_pkt_xfer_rpmsg;
+	ec_dev->phys_name = dev_name(&rpdev->dev);
+	ec_dev->din_size = sizeof(struct ec_host_response) +
+			   sizeof(struct ec_response_get_protocol_info);
+	ec_dev->dout_size = sizeof(struct ec_host_request);
+	dev_set_drvdata(dev, ec_dev);
+
+	ec_rpmsg->rpdev = rpdev;
+	init_completion(&ec_rpmsg->xfer_ack);
+	INIT_WORK(&ec_rpmsg->host_event_work,
+		  cros_ec_rpmsg_host_event_function);
+
+	return cros_ec_register(ec_dev);
+}
+
+static void cros_ec_rpmsg_remove(struct rpmsg_device *rpdev)
+{
+	struct cros_ec_device *ec_dev = dev_get_drvdata(&rpdev->dev);
+	struct cros_ec_rpmsg *ec_rpmsg = ec_dev->priv;
+
+	cancel_work_sync(&ec_rpmsg->host_event_work);
+}
+
+static const struct of_device_id cros_ec_rpmsg_of_match[] = {
+	{ .compatible = "google,cros-ec-rpmsg", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cros_ec_rpmsg_of_match);
+
+static struct rpmsg_driver cros_ec_driver_rpmsg = {
+	.drv = {
+		.name   = "cros-ec-rpmsg",
+		.of_match_table = cros_ec_rpmsg_of_match,
+	},
+	.probe		= cros_ec_rpmsg_probe,
+	.remove		= cros_ec_rpmsg_remove,
+	.callback	= cros_ec_rpmsg_callback,
+};
+
+module_rpmsg_driver(cros_ec_driver_rpmsg);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ChromeOS EC multi function device (rpmsg)");
diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c
index ffc38f9d4829..8e9451720e73 100644
--- a/drivers/platform/chrome/cros_ec_spi.c
+++ b/drivers/platform/chrome/cros_ec_spi.c
@@ -75,6 +75,27 @@ struct cros_ec_spi {
 	unsigned int end_of_msg_delay;
 };
 
+typedef int (*cros_ec_xfer_fn_t) (struct cros_ec_device *ec_dev,
+				  struct cros_ec_command *ec_msg);
+
+/**
+ * struct cros_ec_xfer_work_params - params for our high priority workers
+ *
+ * @work: The work_struct needed to queue work
+ * @fn: The function to use to transfer
+ * @ec_dev: ChromeOS EC device
+ * @ec_msg: Message to transfer
+ * @ret: The return value of the function
+ */
+
+struct cros_ec_xfer_work_params {
+	struct work_struct work;
+	cros_ec_xfer_fn_t fn;
+	struct cros_ec_device *ec_dev;
+	struct cros_ec_command *ec_msg;
+	int ret;
+};
+
 static void debug_packet(struct device *dev, const char *name, u8 *ptr,
 			 int len)
 {
@@ -350,13 +371,13 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
 }
 
 /**
- * cros_ec_pkt_xfer_spi - Transfer a packet over SPI and receive the reply
+ * do_cros_ec_pkt_xfer_spi - Transfer a packet over SPI and receive the reply
  *
  * @ec_dev: ChromeOS EC device
  * @ec_msg: Message to transfer
  */
-static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
-				struct cros_ec_command *ec_msg)
+static int do_cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
+				   struct cros_ec_command *ec_msg)
 {
 	struct ec_host_response *response;
 	struct cros_ec_spi *ec_spi = ec_dev->priv;
@@ -493,13 +514,13 @@ exit:
 }
 
 /**
- * cros_ec_cmd_xfer_spi - Transfer a message over SPI and receive the reply
+ * do_cros_ec_cmd_xfer_spi - Transfer a message over SPI and receive the reply
  *
  * @ec_dev: ChromeOS EC device
  * @ec_msg: Message to transfer
  */
-static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
-				struct cros_ec_command *ec_msg)
+static int do_cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
+				   struct cros_ec_command *ec_msg)
 {
 	struct cros_ec_spi *ec_spi = ec_dev->priv;
 	struct spi_transfer trans;
@@ -611,6 +632,53 @@ exit:
 	return ret;
 }
 
+static void cros_ec_xfer_high_pri_work(struct work_struct *work)
+{
+	struct cros_ec_xfer_work_params *params;
+
+	params = container_of(work, struct cros_ec_xfer_work_params, work);
+	params->ret = params->fn(params->ec_dev, params->ec_msg);
+}
+
+static int cros_ec_xfer_high_pri(struct cros_ec_device *ec_dev,
+				 struct cros_ec_command *ec_msg,
+				 cros_ec_xfer_fn_t fn)
+{
+	struct cros_ec_xfer_work_params params;
+
+	INIT_WORK_ONSTACK(&params.work, cros_ec_xfer_high_pri_work);
+	params.ec_dev = ec_dev;
+	params.ec_msg = ec_msg;
+	params.fn = fn;
+
+	/*
+	 * This looks a bit ridiculous.  Why do the work on a
+	 * different thread if we're just going to block waiting for
+	 * the thread to finish?  The key here is that the thread is
+	 * running at high priority but the calling context might not
+	 * be.  We need to be at high priority to avoid getting
+	 * context switched out for too long and the EC giving up on
+	 * the transfer.
+	 */
+	queue_work(system_highpri_wq, &params.work);
+	flush_work(&params.work);
+	destroy_work_on_stack(&params.work);
+
+	return params.ret;
+}
+
+static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
+				struct cros_ec_command *ec_msg)
+{
+	return cros_ec_xfer_high_pri(ec_dev, ec_msg, do_cros_ec_pkt_xfer_spi);
+}
+
+static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
+				struct cros_ec_command *ec_msg)
+{
+	return cros_ec_xfer_high_pri(ec_dev, ec_msg, do_cros_ec_cmd_xfer_spi);
+}
+
 static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev)
 {
 	struct device_node *np = dev->of_node;
diff --git a/drivers/platform/chrome/cros_ec_trace.c b/drivers/platform/chrome/cros_ec_trace.c
new file mode 100644
index 000000000000..0a76412095a9
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_trace.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+// Trace events for the ChromeOS Embedded Controller
+//
+// Copyright 2019 Google LLC.
+
+#define TRACE_SYMBOL(a) {a, #a}
+
+// Generate the list using the following script:
+// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/mfd/cros_ec_commands.h
+#define EC_CMDS \
+	TRACE_SYMBOL(EC_CMD_PROTO_VERSION), \
+	TRACE_SYMBOL(EC_CMD_HELLO), \
+	TRACE_SYMBOL(EC_CMD_GET_VERSION), \
+	TRACE_SYMBOL(EC_CMD_READ_TEST), \
+	TRACE_SYMBOL(EC_CMD_GET_BUILD_INFO), \
+	TRACE_SYMBOL(EC_CMD_GET_CHIP_INFO), \
+	TRACE_SYMBOL(EC_CMD_GET_BOARD_VERSION), \
+	TRACE_SYMBOL(EC_CMD_READ_MEMMAP), \
+	TRACE_SYMBOL(EC_CMD_GET_CMD_VERSIONS), \
+	TRACE_SYMBOL(EC_CMD_GET_COMMS_STATUS), \
+	TRACE_SYMBOL(EC_CMD_TEST_PROTOCOL), \
+	TRACE_SYMBOL(EC_CMD_GET_PROTOCOL_INFO), \
+	TRACE_SYMBOL(EC_CMD_GSV_PAUSE_IN_S5), \
+	TRACE_SYMBOL(EC_CMD_GET_FEATURES), \
+	TRACE_SYMBOL(EC_CMD_FLASH_INFO), \
+	TRACE_SYMBOL(EC_CMD_FLASH_READ), \
+	TRACE_SYMBOL(EC_CMD_FLASH_WRITE), \
+	TRACE_SYMBOL(EC_CMD_FLASH_ERASE), \
+	TRACE_SYMBOL(EC_CMD_FLASH_PROTECT), \
+	TRACE_SYMBOL(EC_CMD_FLASH_REGION_INFO), \
+	TRACE_SYMBOL(EC_CMD_VBNV_CONTEXT), \
+	TRACE_SYMBOL(EC_CMD_PWM_GET_FAN_TARGET_RPM), \
+	TRACE_SYMBOL(EC_CMD_PWM_SET_FAN_TARGET_RPM), \
+	TRACE_SYMBOL(EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT), \
+	TRACE_SYMBOL(EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT), \
+	TRACE_SYMBOL(EC_CMD_PWM_SET_FAN_DUTY), \
+	TRACE_SYMBOL(EC_CMD_PWM_SET_DUTY), \
+	TRACE_SYMBOL(EC_CMD_PWM_GET_DUTY), \
+	TRACE_SYMBOL(EC_CMD_LIGHTBAR_CMD), \
+	TRACE_SYMBOL(EC_CMD_LED_CONTROL), \
+	TRACE_SYMBOL(EC_CMD_VBOOT_HASH), \
+	TRACE_SYMBOL(EC_CMD_MOTION_SENSE_CMD), \
+	TRACE_SYMBOL(EC_CMD_USB_CHARGE_SET_MODE), \
+	TRACE_SYMBOL(EC_CMD_PSTORE_INFO), \
+	TRACE_SYMBOL(EC_CMD_PSTORE_READ), \
+	TRACE_SYMBOL(EC_CMD_PSTORE_WRITE), \
+	TRACE_SYMBOL(EC_CMD_RTC_GET_VALUE), \
+	TRACE_SYMBOL(EC_CMD_RTC_GET_ALARM), \
+	TRACE_SYMBOL(EC_CMD_RTC_SET_VALUE), \
+	TRACE_SYMBOL(EC_CMD_RTC_SET_ALARM), \
+	TRACE_SYMBOL(EC_CMD_PORT80_LAST_BOOT), \
+	TRACE_SYMBOL(EC_CMD_PORT80_READ), \
+	TRACE_SYMBOL(EC_CMD_THERMAL_SET_THRESHOLD), \
+	TRACE_SYMBOL(EC_CMD_THERMAL_GET_THRESHOLD), \
+	TRACE_SYMBOL(EC_CMD_THERMAL_AUTO_FAN_CTRL), \
+	TRACE_SYMBOL(EC_CMD_TMP006_GET_CALIBRATION), \
+	TRACE_SYMBOL(EC_CMD_TMP006_SET_CALIBRATION), \
+	TRACE_SYMBOL(EC_CMD_TMP006_GET_RAW), \
+	TRACE_SYMBOL(EC_CMD_MKBP_STATE), \
+	TRACE_SYMBOL(EC_CMD_MKBP_INFO), \
+	TRACE_SYMBOL(EC_CMD_MKBP_SIMULATE_KEY), \
+	TRACE_SYMBOL(EC_CMD_MKBP_SET_CONFIG), \
+	TRACE_SYMBOL(EC_CMD_MKBP_GET_CONFIG), \
+	TRACE_SYMBOL(EC_CMD_KEYSCAN_SEQ_CTRL), \
+	TRACE_SYMBOL(EC_CMD_GET_NEXT_EVENT), \
+	TRACE_SYMBOL(EC_CMD_TEMP_SENSOR_GET_INFO), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_GET_B), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_GET_SMI_MASK), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_GET_SCI_MASK), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_GET_WAKE_MASK), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_SET_SMI_MASK), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_SET_SCI_MASK), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_CLEAR), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_SET_WAKE_MASK), \
+	TRACE_SYMBOL(EC_CMD_HOST_EVENT_CLEAR_B), \
+	TRACE_SYMBOL(EC_CMD_SWITCH_ENABLE_BKLIGHT), \
+	TRACE_SYMBOL(EC_CMD_SWITCH_ENABLE_WIRELESS), \
+	TRACE_SYMBOL(EC_CMD_GPIO_SET), \
+	TRACE_SYMBOL(EC_CMD_GPIO_GET), \
+	TRACE_SYMBOL(EC_CMD_I2C_READ), \
+	TRACE_SYMBOL(EC_CMD_I2C_WRITE), \
+	TRACE_SYMBOL(EC_CMD_CHARGE_CONTROL), \
+	TRACE_SYMBOL(EC_CMD_CONSOLE_SNAPSHOT), \
+	TRACE_SYMBOL(EC_CMD_CONSOLE_READ), \
+	TRACE_SYMBOL(EC_CMD_BATTERY_CUT_OFF), \
+	TRACE_SYMBOL(EC_CMD_USB_MUX), \
+	TRACE_SYMBOL(EC_CMD_LDO_SET), \
+	TRACE_SYMBOL(EC_CMD_LDO_GET), \
+	TRACE_SYMBOL(EC_CMD_POWER_INFO), \
+	TRACE_SYMBOL(EC_CMD_I2C_PASSTHRU), \
+	TRACE_SYMBOL(EC_CMD_HANG_DETECT), \
+	TRACE_SYMBOL(EC_CMD_CHARGE_STATE), \
+	TRACE_SYMBOL(EC_CMD_CHARGE_CURRENT_LIMIT), \
+	TRACE_SYMBOL(EC_CMD_EXTERNAL_POWER_LIMIT), \
+	TRACE_SYMBOL(EC_CMD_HOST_SLEEP_EVENT), \
+	TRACE_SYMBOL(EC_CMD_SB_READ_WORD), \
+	TRACE_SYMBOL(EC_CMD_SB_WRITE_WORD), \
+	TRACE_SYMBOL(EC_CMD_SB_READ_BLOCK), \
+	TRACE_SYMBOL(EC_CMD_SB_WRITE_BLOCK), \
+	TRACE_SYMBOL(EC_CMD_BATTERY_VENDOR_PARAM), \
+	TRACE_SYMBOL(EC_CMD_CODEC_I2S), \
+	TRACE_SYMBOL(EC_CMD_REBOOT_EC), \
+	TRACE_SYMBOL(EC_CMD_GET_PANIC_INFO), \
+	TRACE_SYMBOL(EC_CMD_ACPI_READ), \
+	TRACE_SYMBOL(EC_CMD_ACPI_WRITE), \
+	TRACE_SYMBOL(EC_CMD_ACPI_QUERY_EVENT), \
+	TRACE_SYMBOL(EC_CMD_CEC_WRITE_MSG), \
+	TRACE_SYMBOL(EC_CMD_CEC_SET), \
+	TRACE_SYMBOL(EC_CMD_CEC_GET), \
+	TRACE_SYMBOL(EC_CMD_REBOOT), \
+	TRACE_SYMBOL(EC_CMD_RESEND_RESPONSE), \
+	TRACE_SYMBOL(EC_CMD_VERSION0), \
+	TRACE_SYMBOL(EC_CMD_PD_EXCHANGE_STATUS), \
+	TRACE_SYMBOL(EC_CMD_USB_PD_CONTROL), \
+	TRACE_SYMBOL(EC_CMD_USB_PD_PORTS), \
+	TRACE_SYMBOL(EC_CMD_USB_PD_POWER_INFO), \
+	TRACE_SYMBOL(EC_CMD_CHARGE_PORT_COUNT), \
+	TRACE_SYMBOL(EC_CMD_USB_PD_DISCOVERY), \
+	TRACE_SYMBOL(EC_CMD_PD_CHARGE_PORT_OVERRIDE), \
+	TRACE_SYMBOL(EC_CMD_PD_GET_LOG_ENTRY), \
+	TRACE_SYMBOL(EC_CMD_USB_PD_MUX_INFO)
+
+#define CREATE_TRACE_POINTS
+#include "cros_ec_trace.h"
diff --git a/drivers/platform/chrome/cros_ec_trace.h b/drivers/platform/chrome/cros_ec_trace.h
new file mode 100644
index 000000000000..7ae3b89c78b9
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_trace.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Trace events for the ChromeOS Embedded Controller
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM cros_ec
+
+#if !defined(_CROS_EC_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _CROS_EC_TRACE_H_
+
+#include <linux/types.h>
+#include <linux/mfd/cros_ec.h>
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(cros_ec_cmd_class,
+	TP_PROTO(struct cros_ec_command *cmd),
+	TP_ARGS(cmd),
+	TP_STRUCT__entry(
+		__field(uint32_t, version)
+		__field(uint32_t, command)
+	),
+	TP_fast_assign(
+		__entry->version = cmd->version;
+		__entry->command = cmd->command;
+	),
+	TP_printk("version: %u, command: %s", __entry->version,
+		  __print_symbolic(__entry->command, EC_CMDS))
+);
+
+
+DEFINE_EVENT(cros_ec_cmd_class, cros_ec_cmd,
+	TP_PROTO(struct cros_ec_command *cmd),
+	TP_ARGS(cmd)
+);
+
+
+#endif /* _CROS_EC_TRACE_H_ */
+
+/* this part must be outside header guard */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE cros_ec_trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/platform/chrome/cros_usbpd_logger.c b/drivers/platform/chrome/cros_usbpd_logger.c
new file mode 100644
index 000000000000..7c7b267626a0
--- /dev/null
+++ b/drivers/platform/chrome/cros_usbpd_logger.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Logging driver for ChromeOS EC based USBPD Charger.
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+#include <linux/ktime.h>
+#include <linux/math64.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+#define DRV_NAME "cros-usbpd-logger"
+
+#define CROS_USBPD_MAX_LOG_ENTRIES	30
+#define CROS_USBPD_LOG_UPDATE_DELAY	msecs_to_jiffies(60000)
+#define CROS_USBPD_DATA_SIZE		16
+#define CROS_USBPD_LOG_RESP_SIZE	(sizeof(struct ec_response_pd_log) + \
+					 CROS_USBPD_DATA_SIZE)
+#define CROS_USBPD_BUFFER_SIZE		(sizeof(struct cros_ec_command) + \
+					 CROS_USBPD_LOG_RESP_SIZE)
+/* Buffer for building the PDLOG string */
+#define BUF_SIZE	80
+
+struct logger_data {
+	struct device *dev;
+	struct cros_ec_dev *ec_dev;
+	u8 ec_buffer[CROS_USBPD_BUFFER_SIZE];
+	struct delayed_work log_work;
+	struct workqueue_struct *log_workqueue;
+};
+
+static const char * const chg_type_names[] = {
+	"None", "PD", "Type-C", "Proprietary", "DCP", "CDP", "SDP",
+	"Other", "VBUS"
+};
+
+static const char * const role_names[] = {
+	"Disconnected", "SRC", "SNK", "SNK (not charging)"
+};
+
+static const char * const fault_names[] = {
+	"---", "OCP", "fast OCP", "OVP", "Discharge"
+};
+
+static int append_str(char *buf, int pos, const char *fmt, ...)
+{
+	va_list args;
+	int i;
+
+	va_start(args, fmt);
+	i = vsnprintf(buf + pos, BUF_SIZE - pos, fmt, args);
+	va_end(args);
+
+	return i;
+}
+
+static struct ec_response_pd_log *ec_get_log_entry(struct logger_data *logger)
+{
+	struct cros_ec_dev *ec_dev = logger->ec_dev;
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = (struct cros_ec_command *)logger->ec_buffer;
+
+	msg->command = ec_dev->cmd_offset + EC_CMD_PD_GET_LOG_ENTRY;
+	msg->insize = CROS_USBPD_LOG_RESP_SIZE;
+
+	ret = cros_ec_cmd_xfer_status(ec_dev->ec_dev, msg);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	return (struct ec_response_pd_log *)msg->data;
+}
+
+static void cros_usbpd_print_log_entry(struct ec_response_pd_log *r,
+				       ktime_t tstamp)
+{
+	const char *fault, *role, *chg_type;
+	struct usb_chg_measures *meas;
+	struct mcdp_info *minfo;
+	int role_idx, type_idx;
+	char buf[BUF_SIZE + 1];
+	struct rtc_time rt;
+	int len = 0;
+	s32 rem;
+	int i;
+
+	/* The timestamp is the number of 1024th of seconds in the past */
+	tstamp = ktime_sub_us(tstamp, r->timestamp << PD_LOG_TIMESTAMP_SHIFT);
+	rt = rtc_ktime_to_tm(tstamp);
+
+	switch (r->type) {
+	case PD_EVENT_MCU_CHARGE:
+		if (r->data & CHARGE_FLAGS_OVERRIDE)
+			len += append_str(buf, len, "override ");
+
+		if (r->data & CHARGE_FLAGS_DELAYED_OVERRIDE)
+			len += append_str(buf, len, "pending_override ");
+
+		role_idx = r->data & CHARGE_FLAGS_ROLE_MASK;
+		role = role_idx < ARRAY_SIZE(role_names) ?
+			role_names[role_idx] : "Unknown";
+
+		type_idx = (r->data & CHARGE_FLAGS_TYPE_MASK)
+			 >> CHARGE_FLAGS_TYPE_SHIFT;
+
+		chg_type = type_idx < ARRAY_SIZE(chg_type_names) ?
+			chg_type_names[type_idx] : "???";
+
+		if (role_idx == USB_PD_PORT_POWER_DISCONNECTED ||
+		    role_idx == USB_PD_PORT_POWER_SOURCE) {
+			len += append_str(buf, len, "%s", role);
+			break;
+		}
+
+		meas = (struct usb_chg_measures *)r->payload;
+		len += append_str(buf, len, "%s %s %s %dmV max %dmV / %dmA",
+				  role,	r->data & CHARGE_FLAGS_DUAL_ROLE ?
+				  "DRP" : "Charger",
+				  chg_type, meas->voltage_now,
+				  meas->voltage_max, meas->current_max);
+		break;
+	case PD_EVENT_ACC_RW_FAIL:
+		len += append_str(buf, len, "RW signature check failed");
+		break;
+	case PD_EVENT_PS_FAULT:
+		fault = r->data < ARRAY_SIZE(fault_names) ? fault_names[r->data]
+							  : "???";
+		len += append_str(buf, len, "Power supply fault: %s", fault);
+		break;
+	case PD_EVENT_VIDEO_DP_MODE:
+		len += append_str(buf, len, "DP mode %sabled", r->data == 1 ?
+				  "en" : "dis");
+		break;
+	case PD_EVENT_VIDEO_CODEC:
+		minfo = (struct mcdp_info *)r->payload;
+		len += append_str(buf, len, "HDMI info: family:%04x chipid:%04x ",
+				  MCDP_FAMILY(minfo->family),
+				  MCDP_CHIPID(minfo->chipid));
+		len += append_str(buf, len, "irom:%d.%d.%d fw:%d.%d.%d",
+				  minfo->irom.major, minfo->irom.minor,
+				  minfo->irom.build, minfo->fw.major,
+				  minfo->fw.minor, minfo->fw.build);
+		break;
+	default:
+		len += append_str(buf, len, "Event %02x (%04x) [", r->type,
+				  r->data);
+
+		for (i = 0; i < PD_LOG_SIZE(r->size_port); i++)
+			len += append_str(buf, len, "%02x ", r->payload[i]);
+
+		len += append_str(buf, len, "]");
+		break;
+	}
+
+	div_s64_rem(ktime_to_ms(tstamp), MSEC_PER_SEC, &rem);
+	pr_info("PDLOG %d/%02d/%02d %02d:%02d:%02d.%03d P%d %s\n",
+		rt.tm_year + 1900, rt.tm_mon + 1, rt.tm_mday,
+		rt.tm_hour, rt.tm_min, rt.tm_sec, rem,
+		PD_LOG_PORT(r->size_port), buf);
+}
+
+static void cros_usbpd_log_check(struct work_struct *work)
+{
+	struct logger_data *logger = container_of(to_delayed_work(work),
+						  struct logger_data,
+						  log_work);
+	struct device *dev = logger->dev;
+	struct ec_response_pd_log *r;
+	int entries = 0;
+	ktime_t now;
+
+	while (entries++ < CROS_USBPD_MAX_LOG_ENTRIES) {
+		r = ec_get_log_entry(logger);
+		now = ktime_get_real();
+		if (IS_ERR(r)) {
+			dev_dbg(dev, "Cannot get PD log %ld\n", PTR_ERR(r));
+			break;
+		}
+		if (r->type == PD_EVENT_NO_ENTRY)
+			break;
+
+		cros_usbpd_print_log_entry(r, now);
+	}
+
+	queue_delayed_work(logger->log_workqueue, &logger->log_work,
+			   CROS_USBPD_LOG_UPDATE_DELAY);
+}
+
+static int cros_usbpd_logger_probe(struct platform_device *pd)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+	struct device *dev = &pd->dev;
+	struct logger_data *logger;
+
+	logger = devm_kzalloc(dev, sizeof(*logger), GFP_KERNEL);
+	if (!logger)
+		return -ENOMEM;
+
+	logger->dev = dev;
+	logger->ec_dev = ec_dev;
+
+	platform_set_drvdata(pd, logger);
+
+	/* Retrieve PD event logs periodically */
+	INIT_DELAYED_WORK(&logger->log_work, cros_usbpd_log_check);
+	logger->log_workqueue =	create_singlethread_workqueue("cros_usbpd_log");
+	queue_delayed_work(logger->log_workqueue, &logger->log_work,
+			   CROS_USBPD_LOG_UPDATE_DELAY);
+
+	return 0;
+}
+
+static int cros_usbpd_logger_remove(struct platform_device *pd)
+{
+	struct logger_data *logger = platform_get_drvdata(pd);
+
+	cancel_delayed_work_sync(&logger->log_work);
+
+	return 0;
+}
+
+static int __maybe_unused cros_usbpd_logger_resume(struct device *dev)
+{
+	struct logger_data *logger = dev_get_drvdata(dev);
+
+	queue_delayed_work(logger->log_workqueue, &logger->log_work,
+			   CROS_USBPD_LOG_UPDATE_DELAY);
+
+	return 0;
+}
+
+static int __maybe_unused cros_usbpd_logger_suspend(struct device *dev)
+{
+	struct logger_data *logger = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&logger->log_work);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cros_usbpd_logger_pm_ops, cros_usbpd_logger_suspend,
+			 cros_usbpd_logger_resume);
+
+static struct platform_driver cros_usbpd_logger_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &cros_usbpd_logger_pm_ops,
+	},
+	.probe = cros_usbpd_logger_probe,
+	.remove = cros_usbpd_logger_remove,
+};
+
+module_platform_driver(cros_usbpd_logger_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Logging driver for ChromeOS EC USBPD Charger.");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/platform/chrome/wilco_ec/debugfs.c b/drivers/platform/chrome/wilco_ec/debugfs.c
index c090db2cd5be..f163476d080d 100644
--- a/drivers/platform/chrome/wilco_ec/debugfs.c
+++ b/drivers/platform/chrome/wilco_ec/debugfs.c
@@ -4,31 +4,7 @@
  *
  * Copyright 2019 Google LLC
  *
- * There is only one attribute used for debugging, called raw.
- * You can write a hexadecimal sentence to raw, and that series of bytes
- * will be sent to the EC. Then, you can read the bytes of response
- * by reading from raw.
- *
- * For writing:
- * Bytes 0-1 indicate the message type:
- *         00 F0 = Execute Legacy Command
- *         00 F2 = Read/Write NVRAM Property
- * Byte 2 provides the command code
- * Bytes 3+ consist of the data passed in the request
- *
- * When referencing the EC interface spec, byte 2 corresponds to MBOX[0],
- * byte 3 corresponds to MBOX[1], etc.
- *
- * At least three bytes are required, for the msg type and command,
- * with additional bytes optional for additional data.
- *
- * Example:
- * // Request EC info type 3 (EC firmware build date)
- * $ echo 00 f0 38 00 03 00 > raw
- * // View the result. The decoded ASCII result "12/21/18" is
- * // included after the raw hex.
- * $ cat raw
- * 00 31 32 2f 32 31 2f 31 38 00 38 00 01 00 2f 00  .12/21/18.8...
+ * See Documentation/ABI/testing/debugfs-wilco-ec for usage.
  */
 
 #include <linux/ctype.h>
@@ -136,18 +112,15 @@ static ssize_t raw_write(struct file *file, const char __user *user_buf,
 	ret = parse_hex_sentence(buf, kcount, request_data, TYPE_AND_DATA_SIZE);
 	if (ret < 0)
 		return ret;
-	/* Need at least two bytes for message type and one for command */
+	/* Need at least two bytes for message type and one byte of data */
 	if (ret < 3)
 		return -EINVAL;
 
-	/* Clear response data buffer */
-	memset(debug_info->raw_data, '\0', EC_MAILBOX_DATA_SIZE_EXTENDED);
-
 	msg.type = request_data[0] << 8 | request_data[1];
-	msg.flags = WILCO_EC_FLAG_RAW;
-	msg.command = request_data[2];
-	msg.request_data = ret > 3 ? request_data + 3 : 0;
-	msg.request_size = ret - 3;
+	msg.flags = 0;
+	msg.request_data = request_data + 2;
+	msg.request_size = ret - 2;
+	memset(debug_info->raw_data, 0, sizeof(debug_info->raw_data));
 	msg.response_data = debug_info->raw_data;
 	msg.response_size = EC_MAILBOX_DATA_SIZE;
 
@@ -174,7 +147,8 @@ static ssize_t raw_read(struct file *file, char __user *user_buf, size_t count,
 		fmt_len = hex_dump_to_buffer(debug_info->raw_data,
 					     debug_info->response_size,
 					     16, 1, debug_info->formatted_data,
-					     FORMATTED_BUFFER_SIZE, true);
+					     sizeof(debug_info->formatted_data),
+					     true);
 		/* Only return response the first time it is read */
 		debug_info->response_size = 0;
 	}
@@ -190,6 +164,51 @@ static const struct file_operations fops_raw = {
 	.llseek = no_llseek,
 };
 
+#define CMD_KB_CHROME		0x88
+#define SUB_CMD_H1_GPIO		0x0A
+
+struct h1_gpio_status_request {
+	u8 cmd;		/* Always CMD_KB_CHROME */
+	u8 reserved;
+	u8 sub_cmd;	/* Always SUB_CMD_H1_GPIO */
+} __packed;
+
+struct hi_gpio_status_response {
+	u8 status;	/* 0 if allowed */
+	u8 val;		/* BIT(0)=ENTRY_TO_FACT_MODE, BIT(1)=SPI_CHROME_SEL */
+} __packed;
+
+static int h1_gpio_get(void *arg, u64 *val)
+{
+	struct wilco_ec_device *ec = arg;
+	struct h1_gpio_status_request rq;
+	struct hi_gpio_status_response rs;
+	struct wilco_ec_message msg;
+	int ret;
+
+	memset(&rq, 0, sizeof(rq));
+	rq.cmd = CMD_KB_CHROME;
+	rq.sub_cmd = SUB_CMD_H1_GPIO;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.type = WILCO_EC_MSG_LEGACY;
+	msg.request_data = &rq;
+	msg.request_size = sizeof(rq);
+	msg.response_data = &rs;
+	msg.response_size = sizeof(rs);
+	ret = wilco_ec_mailbox(ec, &msg);
+	if (ret < 0)
+		return ret;
+	if (rs.status)
+		return -EIO;
+
+	*val = rs.val;
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_h1_gpio, h1_gpio_get, NULL, "0x%02llx\n");
+
 /**
  * wilco_ec_debugfs_probe() - Create the debugfs node
  * @pdev: The platform device, probably created in core.c
@@ -211,6 +230,8 @@ static int wilco_ec_debugfs_probe(struct platform_device *pdev)
 	if (!debug_info->dir)
 		return 0;
 	debugfs_create_file("raw", 0644, debug_info->dir, NULL, &fops_raw);
+	debugfs_create_file("h1_gpio", 0444, debug_info->dir, ec,
+			    &fops_h1_gpio);
 
 	return 0;
 }
diff --git a/drivers/platform/chrome/wilco_ec/mailbox.c b/drivers/platform/chrome/wilco_ec/mailbox.c
index 14355668ddfa..7fb58b487963 100644
--- a/drivers/platform/chrome/wilco_ec/mailbox.c
+++ b/drivers/platform/chrome/wilco_ec/mailbox.c
@@ -92,21 +92,10 @@ static void wilco_ec_prepare(struct wilco_ec_message *msg,
 			     struct wilco_ec_request *rq)
 {
 	memset(rq, 0, sizeof(*rq));
-
-	/* Handle messages without trimming bytes from the request */
-	if (msg->request_size && msg->flags & WILCO_EC_FLAG_RAW_REQUEST) {
-		rq->reserved_raw = *(u8 *)msg->request_data;
-		msg->request_size--;
-		memmove(msg->request_data, msg->request_data + 1,
-			msg->request_size);
-	}
-
-	/* Fill in request packet */
 	rq->struct_version = EC_MAILBOX_PROTO_VERSION;
 	rq->mailbox_id = msg->type;
 	rq->mailbox_version = EC_MAILBOX_VERSION;
-	rq->data_size = msg->request_size + EC_MAILBOX_DATA_EXTRA;
-	rq->command = msg->command;
+	rq->data_size = msg->request_size;
 
 	/* Checksum header and data */
 	rq->checksum = wilco_ec_checksum(rq, sizeof(*rq));
@@ -159,6 +148,12 @@ static int wilco_ec_transfer(struct wilco_ec_device *ec,
 		return -EIO;
 	}
 
+	/*
+	 * The EC always returns either EC_MAILBOX_DATA_SIZE or
+	 * EC_MAILBOX_DATA_SIZE_EXTENDED bytes of data, so we need to
+	 * calculate the checksum on **all** of this data, even if we
+	 * won't use all of it.
+	 */
 	if (msg->flags & WILCO_EC_FLAG_EXTENDED_DATA)
 		size = EC_MAILBOX_DATA_SIZE_EXTENDED;
 	else
@@ -173,33 +168,26 @@ static int wilco_ec_transfer(struct wilco_ec_device *ec,
 		return -EBADMSG;
 	}
 
-	/* Check that the EC reported success */
-	msg->result = rs->result;
-	if (msg->result) {
-		dev_dbg(ec->dev, "bad response: 0x%02x\n", msg->result);
+	if (rs->result) {
+		dev_dbg(ec->dev, "EC reported failure: 0x%02x\n", rs->result);
 		return -EBADMSG;
 	}
 
-	/* Check the returned data size, skipping the header */
 	if (rs->data_size != size) {
 		dev_dbg(ec->dev, "unexpected packet size (%u != %zu)",
 			rs->data_size, size);
 		return -EMSGSIZE;
 	}
 
-	/* Skip 1 response data byte unless specified */
-	size = (msg->flags & WILCO_EC_FLAG_RAW_RESPONSE) ? 0 : 1;
-	if ((ssize_t) rs->data_size - size < msg->response_size) {
-		dev_dbg(ec->dev, "response data too short (%zd < %zu)",
-			(ssize_t) rs->data_size - size, msg->response_size);
+	if (rs->data_size < msg->response_size) {
+		dev_dbg(ec->dev, "EC didn't return enough data (%u < %zu)",
+			rs->data_size, msg->response_size);
 		return -EMSGSIZE;
 	}
 
-	/* Ignore response data bytes as requested */
-	memcpy(msg->response_data, rs->data + size, msg->response_size);
+	memcpy(msg->response_data, rs->data, msg->response_size);
 
-	/* Return actual amount of data received */
-	return msg->response_size;
+	return rs->data_size;
 }
 
 /**
@@ -207,10 +195,12 @@ static int wilco_ec_transfer(struct wilco_ec_device *ec,
  * @ec: EC device.
  * @msg: EC message data for request and response.
  *
- * On entry msg->type, msg->flags, msg->command, msg->request_size,
- * msg->response_size, and msg->request_data should all be filled in.
+ * On entry msg->type, msg->request_size, and msg->request_data should all be
+ * filled in. If desired, msg->flags can be set.
  *
- * On exit msg->result and msg->response_data will be filled.
+ * If a response is expected, msg->response_size should be set, and
+ * msg->response_data should point to a buffer with enough space. On exit
+ * msg->response_data will be filled.
  *
  * Return: number of bytes received or negative error code on failure.
  */
@@ -219,9 +209,8 @@ int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg)
 	struct wilco_ec_request *rq;
 	int ret;
 
-	dev_dbg(ec->dev, "cmd=%02x type=%04x flags=%02x rslen=%zu rqlen=%zu\n",
-		msg->command, msg->type, msg->flags, msg->response_size,
-		msg->request_size);
+	dev_dbg(ec->dev, "type=%04x flags=%02x rslen=%zu rqlen=%zu\n",
+		msg->type, msg->flags, msg->response_size, msg->request_size);
 
 	mutex_lock(&ec->mailbox_lock);
 	/* Prepare request packet */
diff --git a/drivers/rtc/rtc-wilco-ec.c b/drivers/rtc/rtc-wilco-ec.c
index e62bda0cb53e..8ad4c4e6d557 100644
--- a/drivers/rtc/rtc-wilco-ec.c
+++ b/drivers/rtc/rtc-wilco-ec.c
@@ -21,8 +21,20 @@
 #define EC_CMOS_TOD_WRITE		0x02
 #define EC_CMOS_TOD_READ		0x08
 
+/* Message sent to the EC to request the current time. */
+struct ec_rtc_read_request {
+	u8 command;
+	u8 reserved;
+	u8 param;
+} __packed;
+static struct ec_rtc_read_request read_rq = {
+	.command = EC_COMMAND_CMOS,
+	.param = EC_CMOS_TOD_READ,
+};
+
 /**
- * struct ec_rtc_read - Format of RTC returned by EC.
+ * struct ec_rtc_read_response - Format of RTC returned by EC.
+ * @reserved: Unused byte
  * @second: Second value (0..59)
  * @minute: Minute value (0..59)
  * @hour: Hour value (0..23)
@@ -33,7 +45,8 @@
  *
  * All values are presented in binary (not BCD).
  */
-struct ec_rtc_read {
+struct ec_rtc_read_response {
+	u8 reserved;
 	u8 second;
 	u8 minute;
 	u8 hour;
@@ -44,8 +57,10 @@ struct ec_rtc_read {
 } __packed;
 
 /**
- * struct ec_rtc_write - Format of RTC sent to the EC.
- * @param: EC_CMOS_TOD_WRITE
+ * struct ec_rtc_write_request - Format of RTC sent to the EC.
+ * @command: Always EC_COMMAND_CMOS
+ * @reserved: Unused byte
+ * @param: Always EC_CMOS_TOD_WRITE
  * @century: Century value (full year / 100)
  * @year: Year value (full year % 100)
  * @month: Month value (1..12)
@@ -57,7 +72,9 @@ struct ec_rtc_read {
  *
  * All values are presented in BCD.
  */
-struct ec_rtc_write {
+struct ec_rtc_write_request {
+	u8 command;
+	u8 reserved;
 	u8 param;
 	u8 century;
 	u8 year;
@@ -72,19 +89,17 @@ struct ec_rtc_write {
 static int wilco_ec_rtc_read(struct device *dev, struct rtc_time *tm)
 {
 	struct wilco_ec_device *ec = dev_get_drvdata(dev->parent);
-	u8 param = EC_CMOS_TOD_READ;
-	struct ec_rtc_read rtc;
-	struct wilco_ec_message msg = {
-		.type = WILCO_EC_MSG_LEGACY,
-		.flags = WILCO_EC_FLAG_RAW_RESPONSE,
-		.command = EC_COMMAND_CMOS,
-		.request_data = &param,
-		.request_size = sizeof(param),
-		.response_data = &rtc,
-		.response_size = sizeof(rtc),
-	};
+	struct ec_rtc_read_response rtc;
+	struct wilco_ec_message msg;
 	int ret;
 
+	memset(&msg, 0, sizeof(msg));
+	msg.type = WILCO_EC_MSG_LEGACY;
+	msg.request_data = &read_rq;
+	msg.request_size = sizeof(read_rq);
+	msg.response_data = &rtc;
+	msg.response_size = sizeof(rtc);
+
 	ret = wilco_ec_mailbox(ec, &msg);
 	if (ret < 0)
 		return ret;
@@ -106,14 +121,8 @@ static int wilco_ec_rtc_read(struct device *dev, struct rtc_time *tm)
 static int wilco_ec_rtc_write(struct device *dev, struct rtc_time *tm)
 {
 	struct wilco_ec_device *ec = dev_get_drvdata(dev->parent);
-	struct ec_rtc_write rtc;
-	struct wilco_ec_message msg = {
-		.type = WILCO_EC_MSG_LEGACY,
-		.flags = WILCO_EC_FLAG_RAW_RESPONSE,
-		.command = EC_COMMAND_CMOS,
-		.request_data = &rtc,
-		.request_size = sizeof(rtc),
-	};
+	struct ec_rtc_write_request rtc;
+	struct wilco_ec_message msg;
 	int year = tm->tm_year + 1900;
 	/*
 	 * Convert from 0=Sunday to 0=Saturday for the EC
@@ -123,6 +132,7 @@ static int wilco_ec_rtc_write(struct device *dev, struct rtc_time *tm)
 	int wday = tm->tm_wday == 6 ? 0 : tm->tm_wday + 1;
 	int ret;
 
+	rtc.command	= EC_COMMAND_CMOS;
 	rtc.param	= EC_CMOS_TOD_WRITE;
 	rtc.century	= bin2bcd(year / 100);
 	rtc.year	= bin2bcd(year % 100);
@@ -133,6 +143,11 @@ static int wilco_ec_rtc_write(struct device *dev, struct rtc_time *tm)
 	rtc.second	= bin2bcd(tm->tm_sec);
 	rtc.weekday	= bin2bcd(wday);
 
+	memset(&msg, 0, sizeof(msg));
+	msg.type = WILCO_EC_MSG_LEGACY;
+	msg.request_data = &rtc;
+	msg.request_size = sizeof(rtc);
+
 	ret = wilco_ec_mailbox(ec, &msg);
 	if (ret < 0)
 		return ret;