diff options
| author | Finn Thain <fthain@telegraphics.com.au> | 2019-01-15 15:18:56 +1100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-01-22 10:21:43 +0100 |
| commit | 83d2aed4440c47acc813abeac4acf4390cb40a8c (patch) | |
| tree | 9ffc3c49936a255348ffcebfc9cb65427f8ffd11 /drivers | |
| parent | e3575c1201f009a24885804975b859d868314d9c (diff) | |
| download | linux-83d2aed4440c47acc813abeac4acf4390cb40a8c.tar.bz2 | |
scsi/atari_scsi: Don't select CONFIG_NVRAM
On powerpc, setting CONFIG_NVRAM=n builds a kernel with no NVRAM support.
Setting CONFIG_NVRAM=m enables the /dev/nvram misc device module without
enabling NVRAM support in drivers. Setting CONFIG_NVRAM=y enables the
misc device (built-in) and also enables NVRAM support in drivers.
m68k shares the valkyriefb driver with powerpc, and since that driver uses
NVRAM, it is affected by CONFIG_ATARI_SCSI, because of the use of
"select NVRAM". We can avoid the "select" here, but drivers still have
to interpret the CONFIG_NVRAM symbol consistently regardless of platform.
In this patch and the subsequent fbdev driver patch, the convention is
adopted across all relevant platforms whereby NVRAM functionality gets
enabled in a given device driver when the nvram misc device is built-in
or when both drivers are modules.
Acked-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/char/Kconfig | 5 | ||||
| -rw-r--r-- | drivers/scsi/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/scsi/atari_scsi.c | 2 |
3 files changed, 5 insertions, 8 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 2e2ffe7010aa..a8cac68de177 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -244,7 +244,7 @@ source "drivers/char/hw_random/Kconfig" config NVRAM tristate "/dev/nvram support" - depends on ATARI || X86 || GENERIC_NVRAM + depends on X86 || GENERIC_NVRAM ---help--- If you say Y here and create a character special file /dev/nvram with major number 10 and minor number 144 using mknod ("man mknod"), @@ -262,9 +262,6 @@ config NVRAM should NEVER idly tamper with it. See Ralf Brown's interrupt list for a guide to the use of CMOS bytes by your BIOS. - On Atari machines, /dev/nvram is always configured and does not need - to be selected. - To compile this driver as a module, choose M here: the module will be called nvram. diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index f38882f6f37d..8f9d9e9fa695 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1369,14 +1369,14 @@ config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI select SCSI_SPI_ATTRS - select NVRAM ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have a compatible SCSI controller (e.g. for Medusa). - To compile this driver as a module, choose M here: the - module will be called atari_scsi. + To compile this driver as a module, choose M here: the module will + be called atari_scsi. If you also enable NVRAM support, the SCSI + host's ID is taken from the setting in TT RTC NVRAM. This driver supports both styles of NCR integration into the system: the TT style (separate DMA), and the Falcon style (via diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c index a503dc50c4f8..78b43200c99e 100644 --- a/drivers/scsi/atari_scsi.c +++ b/drivers/scsi/atari_scsi.c @@ -757,7 +757,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev) if (setup_hostid >= 0) { atari_scsi_template.this_id = setup_hostid & 7; - } else { + } else if (IS_REACHABLE(CONFIG_NVRAM)) { /* Test if a host id is set in the NVRam */ if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) { unsigned char b = nvram_read_byte(16); |