Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-soc

* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits)
  ARM: tegra: update defconfig
  arm/tegra: Harmony: Configure PMC for low-level interrupts
  arm/tegra: device tree support for ventana board
  arm/tegra: add support for ventana pinmuxing
  arm/tegra: prepare Seaboard pinmux code for derived boards
  arm/tegra: pinmux: ioremap registers
  gpio/tegra: Convert to a platform device
  arm/tegra: Convert pinmux driver to a platform device
  arm/dt: Tegra: Add pinmux node to tegra20.dtsi
  arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
  ARM: mx5: fix clock usage for suspend
  ARM i.MX entry-macro.S: remove now unused code
  ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER
  ARM i.MX tzic: add handle_irq function
  ARM i.MX avic: add handle_irq function
  ARM: mx25: Add the missing IIM base definition
  ARM i.MX avic: convert to use generic irq chip
  mx31moboard: Add poweroff support
  ARM: mach-qong: Add watchdog support
  ARM: davinci: AM18x: Add wl1271/wlan support
  ...

Fix up conflicts in:
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-mx5/devices-imx53.h
	arch/arm/plat-mxc/include/mach/memory.h

3 files changed, 328 insertions, 67 deletions

diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 6b65207c8106..61044c889f7f 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -20,10 +20,11 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
 
 #include <asm/mach/irq.h>
 
@@ -35,9 +36,7 @@
 #define GPIO_PORT(x)		(((x) >> 3) & 0x3)
 #define GPIO_BIT(x)		((x) & 0x7)
 
-#define GPIO_REG(x)		(IO_TO_VIRT(TEGRA_GPIO_BASE) +	\
-				 GPIO_BANK(x) * 0x80 +		\
-				 GPIO_PORT(x) * 4)
+#define GPIO_REG(x)		(GPIO_BANK(x) * 0x80 + GPIO_PORT(x) * 4)
 
 #define GPIO_CNF(x)		(GPIO_REG(x) + 0x00)
 #define GPIO_OE(x)		(GPIO_REG(x) + 0x10)
@@ -76,15 +75,18 @@ struct tegra_gpio_bank {
 };
 
 
-static struct tegra_gpio_bank tegra_gpio_banks[] = {
-	{.bank = 0, .irq = INT_GPIO1},
-	{.bank = 1, .irq = INT_GPIO2},
-	{.bank = 2, .irq = INT_GPIO3},
-	{.bank = 3, .irq = INT_GPIO4},
-	{.bank = 4, .irq = INT_GPIO5},
-	{.bank = 5, .irq = INT_GPIO6},
-	{.bank = 6, .irq = INT_GPIO7},
-};
+static void __iomem *regs;
+static struct tegra_gpio_bank tegra_gpio_banks[7];
+
+static inline void tegra_gpio_writel(u32 val, u32 reg)
+{
+	__raw_writel(val, regs + reg);
+}
+
+static inline u32 tegra_gpio_readl(u32 reg)
+{
+	return __raw_readl(regs + reg);
+}
 
 static int tegra_gpio_compose(int bank, int port, int bit)
 {
@@ -98,7 +100,7 @@ static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
 	val = 0x100 << GPIO_BIT(gpio);
 	if (value)
 		val |= 1 << GPIO_BIT(gpio);
-	__raw_writel(val, reg);
+	tegra_gpio_writel(val, reg);
 }
 
 void tegra_gpio_enable(int gpio)
@@ -118,7 +120,7 @@ static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+	return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
 }
 
 static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -155,7 +157,7 @@ static void tegra_gpio_irq_ack(struct irq_data *d)
 {
 	int gpio = d->irq - INT_GPIO_BASE;
 
-	__raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
+	tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
 }
 
 static void tegra_gpio_irq_mask(struct irq_data *d)
@@ -208,10 +210,10 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 
 	spin_lock_irqsave(&bank->lvl_lock[port], flags);
 
-	val = __raw_readl(GPIO_INT_LVL(gpio));
+	val = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 	val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
 	val |= lvl_type << GPIO_BIT(gpio);
-	__raw_writel(val, GPIO_INT_LVL(gpio));
+	tegra_gpio_writel(val, GPIO_INT_LVL(gpio));
 
 	spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
 
@@ -237,12 +239,12 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	for (port = 0; port < 4; port++) {
 		int gpio = tegra_gpio_compose(bank->bank, port, 0);
-		unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) &
-			__raw_readl(GPIO_INT_ENB(gpio));
-		u32 lvl = __raw_readl(GPIO_INT_LVL(gpio));
+		unsigned long sta = tegra_gpio_readl(GPIO_INT_STA(gpio)) &
+			tegra_gpio_readl(GPIO_INT_ENB(gpio));
+		u32 lvl = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 
 		for_each_set_bit(pin, &sta, 8) {
-			__raw_writel(1 << pin, GPIO_INT_CLR(gpio));
+			tegra_gpio_writel(1 << pin, GPIO_INT_CLR(gpio));
 
 			/* if gpio is edge triggered, clear condition
 			 * before executing the hander so that we don't
@@ -276,11 +278,11 @@ void tegra_gpio_resume(void)
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
 			unsigned int gpio = (b<<5) | (p<<3);
-			__raw_writel(bank->cnf[p], GPIO_CNF(gpio));
-			__raw_writel(bank->out[p], GPIO_OUT(gpio));
-			__raw_writel(bank->oe[p], GPIO_OE(gpio));
-			__raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
-			__raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
+			tegra_gpio_writel(bank->cnf[p], GPIO_CNF(gpio));
+			tegra_gpio_writel(bank->out[p], GPIO_OUT(gpio));
+			tegra_gpio_writel(bank->oe[p], GPIO_OE(gpio));
+			tegra_gpio_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
+			tegra_gpio_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
 		}
 	}
 
@@ -299,11 +301,11 @@ void tegra_gpio_suspend(void)
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
 			unsigned int gpio = (b<<5) | (p<<3);
-			bank->cnf[p] = __raw_readl(GPIO_CNF(gpio));
-			bank->out[p] = __raw_readl(GPIO_OUT(gpio));
-			bank->oe[p] = __raw_readl(GPIO_OE(gpio));
-			bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio));
-			bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio));
+			bank->cnf[p] = tegra_gpio_readl(GPIO_CNF(gpio));
+			bank->out[p] = tegra_gpio_readl(GPIO_OUT(gpio));
+			bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio));
+			bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio));
+			bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 		}
 	}
 	local_irq_restore(flags);
@@ -333,28 +335,55 @@ static struct irq_chip tegra_gpio_irq_chip = {
  */
 static struct lock_class_key gpio_lock_class;
 
-static int __init tegra_gpio_init(void)
+static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 {
+	struct resource *res;
 	struct tegra_gpio_bank *bank;
 	int gpio;
 	int i;
 	int j;
 
+	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+		if (!res) {
+			dev_err(&pdev->dev, "Missing IRQ resource\n");
+			return -ENODEV;
+		}
+
+		bank = &tegra_gpio_banks[i];
+		bank->bank = i;
+		bank->irq = res->start;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing MEM resource\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     resource_size(res),
+				     dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "Couldn't request MEM resource\n");
+		return -ENODEV;
+	}
+
+	regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "Couldn't ioremap regs\n");
+		return -ENODEV;
+	}
+
 	for (i = 0; i < 7; i++) {
 		for (j = 0; j < 4; j++) {
 			int gpio = tegra_gpio_compose(i, j, 0);
-			__raw_writel(0x00, GPIO_INT_ENB(gpio));
+			tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio));
 		}
 	}
 
 #ifdef CONFIG_OF_GPIO
-	/*
-	 * This isn't ideal, but it gets things hooked up until this
-	 * driver is converted into a platform_device
-	 */
-	tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL,
-						"nvidia,tegra20-gpio");
-#endif /* CONFIG_OF_GPIO */
+	tegra_gpio_chip.of_node = pdev->dev.of_node;
+#endif
 
 	gpiochip_add(&tegra_gpio_chip);
 
@@ -384,6 +413,24 @@ static int __init tegra_gpio_init(void)
 	return 0;
 }
 
+static struct of_device_id tegra_gpio_of_match[] __devinitdata = {
+	{ .compatible = "nvidia,tegra20-gpio", },
+	{ },
+};
+
+static struct platform_driver tegra_gpio_driver = {
+	.driver		= {
+		.name	= "tegra-gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = tegra_gpio_of_match,
+	},
+	.probe		= tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+	return platform_driver_register(&tegra_gpio_driver);
+}
 postcore_initcall(tegra_gpio_init);
 
 void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
@@ -416,13 +463,13 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 			seq_printf(s,
 				"%d:%d %02x %02x %02x %02x %02x %02x %06x\n",
 				i, j,
-				__raw_readl(GPIO_CNF(gpio)),
-				__raw_readl(GPIO_OE(gpio)),
-				__raw_readl(GPIO_OUT(gpio)),
-				__raw_readl(GPIO_IN(gpio)),
-				__raw_readl(GPIO_INT_STA(gpio)),
-				__raw_readl(GPIO_INT_ENB(gpio)),
-				__raw_readl(GPIO_INT_LVL(gpio)));
+				tegra_gpio_readl(GPIO_CNF(gpio)),
+				tegra_gpio_readl(GPIO_OE(gpio)),
+				tegra_gpio_readl(GPIO_OUT(gpio)),
+				tegra_gpio_readl(GPIO_IN(gpio)),
+				tegra_gpio_readl(GPIO_INT_STA(gpio)),
+				tegra_gpio_readl(GPIO_INT_ENB(gpio)),
+				tegra_gpio_readl(GPIO_INT_LVL(gpio)));
 		}
 	}
 	return 0;
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 0076c7448fe6..64a8325a4a8a 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -807,12 +807,25 @@ static void calculate_clk_divider(struct mmc_host *mmc, struct mmc_ios *ios)
 static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct mmc_davinci_host *host = mmc_priv(mmc);
+	struct platform_device *pdev = to_platform_device(mmc->parent);
+	struct davinci_mmc_config *config = pdev->dev.platform_data;
 
 	dev_dbg(mmc_dev(host->mmc),
 		"clock %dHz busmode %d powermode %d Vdd %04x\n",
 		ios->clock, ios->bus_mode, ios->power_mode,
 		ios->vdd);
 
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		if (config && config->set_power)
+			config->set_power(pdev->id, false);
+		break;
+	case MMC_POWER_UP:
+		if (config && config->set_power)
+			config->set_power(pdev->id, true);
+		break;
+	}
+
 	switch (ios->bus_width) {
 	case MMC_BUS_WIDTH_8:
 		dev_dbg(mmc_dev(host->mmc), "Enabling 8 bit mode\n");
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 944291e10f97..ba3a46b78b75 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -35,8 +35,7 @@ extern int usb_disabled(void);
 
 static void at91_start_clock(void)
 {
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		clk_enable(hclk);
+	clk_enable(hclk);
 	clk_enable(iclk);
 	clk_enable(fclk);
 	clocked = 1;
@@ -46,8 +45,7 @@ static void at91_stop_clock(void)
 {
 	clk_disable(fclk);
 	clk_disable(iclk);
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		clk_disable(hclk);
+	clk_disable(hclk);
 	clocked = 0;
 }
 
@@ -142,8 +140,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
 	fclk = clk_get(&pdev->dev, "uhpck");
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		hclk = clk_get(&pdev->dev, "hck0");
+	hclk = clk_get(&pdev->dev, "hclk");
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -155,8 +152,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	/* Error handling */
 	at91_stop_hc(pdev);
 
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		clk_put(hclk);
+	clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
 
@@ -192,8 +188,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		clk_put(hclk);
+	clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
 	fclk = iclk = hclk = NULL;
@@ -223,6 +218,156 @@ ohci_at91_start (struct usb_hcd *hcd)
 	return 0;
 }
 
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+	if (port < 0 || port >= 2)
+		return;
+
+	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+	if (port < 0 || port >= 2)
+		return -EINVAL;
+
+	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	int length = ohci_hub_status_data(hcd, buf);
+	int port;
+
+	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+		if (pdata->overcurrent_changed[port]) {
+			if (! length)
+				length = 1;
+			buf[0] |= 1 << (port + 1);
+		}
+	}
+
+	return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				 u16 wIndex, char *buf, u16 wLength)
+{
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	struct usb_hub_descriptor *desc;
+	int ret = -EINVAL;
+	u32 *data = (u32 *)buf;
+
+	dev_dbg(hcd->self.controller,
+		"ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+		hcd, typeReq, wValue, wIndex, buf, wLength);
+
+	switch (typeReq) {
+	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_POWER) {
+			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+			ohci_at91_usb_set_power(pdata, wIndex - 1, 1);
+			goto out;
+		}
+		break;
+
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: C_OVER_CURRENT\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				pdata->overcurrent_changed[wIndex-1] = 0;
+				pdata->overcurrent_status[wIndex-1] = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: OVER_CURRENT\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				pdata->overcurrent_status[wIndex-1] = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: POWER\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				ohci_at91_usb_set_power(pdata, wIndex - 1, 0);
+				return 0;
+			}
+		}
+		break;
+	}
+
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	if (ret)
+		goto out;
+
+	switch (typeReq) {
+	case GetHubDescriptor:
+
+		/* update the hub's descriptor */
+
+		desc = (struct usb_hub_descriptor *)buf;
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		/* remove the old configurations for power-switching, and
+		 * over-current protection, and insert our new configuration
+		 */
+
+		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+		desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+		if (pdata->overcurrent_supported) {
+			desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+			desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
+		}
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		return ret;
+
+	case GetPortStatus:
+		/* check port status */
+
+		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+		if (wIndex == 1 || wIndex == 2) {
+			if (! ohci_at91_usb_get_power(pdata, wIndex-1)) {
+				*data &= ~cpu_to_le32(RH_PS_PPS);
+			}
+
+			if (pdata->overcurrent_changed[wIndex-1]) {
+				*data |= cpu_to_le32(RH_PS_OCIC);
+			}
+
+			if (pdata->overcurrent_status[wIndex-1]) {
+				*data |= cpu_to_le32(RH_PS_POCI);
+			}
+		}
+	}
+
+ out:
+	return ret;
+}
+
 /*-------------------------------------------------------------------------*/
 
 static const struct hc_driver ohci_at91_hc_driver = {
@@ -258,8 +403,8 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	/*
 	 * root hub support
 	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
+	.hub_status_data =	ohci_at91_hub_status_data,
+	.hub_control =		ohci_at91_hub_control,
 #ifdef CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
@@ -269,22 +414,71 @@ static const struct hc_driver ohci_at91_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct at91_usbh_data *pdata = pdev->dev.platform_data;
+	int val, gpio, port;
+
+	/* From the GPIO notifying the over-current situation, find
+	 * out the corresponding port */
+	gpio = irq_to_gpio(irq);
+	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+		if (pdata->overcurrent_pin[port] == gpio)
+			break;
+	}
+
+	if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
+		dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+		return IRQ_HANDLED;
+	}
+
+	val = gpio_get_value(gpio);
+
+	/* When notified of an over-current situation, disable power
+	   on the corresponding port, and mark this port in
+	   over-current. */
+	if (! val) {
+		ohci_at91_usb_set_power(pdata, port, 0);
+		pdata->overcurrent_status[port]  = 1;
+		pdata->overcurrent_changed[port] = 1;
+	}
+
+	dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+		val ? "exited" : "notified");
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 {
 	struct at91_usbh_data	*pdata = pdev->dev.platform_data;
 	int			i;
 
 	if (pdata) {
-		/* REVISIT make the driver support per-port power switching,
-		 * and also overcurrent detection.  Here we assume the ports
-		 * are always powered while this driver is active, and use
-		 * active-low power switches.
-		 */
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
 			if (pdata->vbus_pin[i] <= 0)
 				continue;
 			gpio_request(pdata->vbus_pin[i], "ohci_vbus");
-			gpio_direction_output(pdata->vbus_pin[i], 0);
+			ohci_at91_usb_set_power(pdata, i, 1);
+		}
+
+		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+			int ret;
+
+			if (pdata->overcurrent_pin[i] <= 0)
+				continue;
+			gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
+
+			ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]),
+					  ohci_hcd_at91_overcurrent_irq,
+					  IRQF_SHARED, "ohci_overcurrent", pdev);
+			if (ret) {
+				gpio_free(pdata->overcurrent_pin[i]);
+				dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+			}
 		}
 	}
 
@@ -301,9 +495,16 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
 			if (pdata->vbus_pin[i] <= 0)
 				continue;
-			gpio_direction_output(pdata->vbus_pin[i], 1);
+			ohci_at91_usb_set_power(pdata, i, 0);
 			gpio_free(pdata->vbus_pin[i]);
 		}
+
+		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+			if (pdata->overcurrent_pin[i] <= 0)
+				continue;
+			free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
+			gpio_free(pdata->overcurrent_pin[i]);
+		}
 	}
 
 	device_init_wakeup(&pdev->dev, 0);