summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-21 17:40:46 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-21 17:40:46 -0700
commit99cc7ad46b62ef20b0478147677bebd1157bd9cf (patch)
treef07f33826e6947108234707030867d969230611d /drivers
parent0214f46b3a0383d6e33c297e7706216b6a550e4b (diff)
parent19358d4488db7e6a04e940730cc75909d7d1e0d8 (diff)
downloadlinux-99cc7ad46b62ef20b0478147677bebd1157bd9cf.tar.bz2
Merge branch 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/Kconfig42
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c1
-rw-r--r--drivers/i2c/busses/i2c-aspeed.c40
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c8
-rw-r--r--drivers/i2c/busses/i2c-davinci.c4
-rw-r--r--drivers/i2c/busses/i2c-designware-baytrail.c10
-rw-r--r--drivers/i2c/busses/i2c-designware-common.c91
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h24
-rw-r--r--drivers/i2c/busses/i2c-designware-master.c223
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c17
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c68
-rw-r--r--drivers/i2c/busses/i2c-designware-slave.c62
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c22
-rw-r--r--drivers/i2c/busses/i2c-fsi.c752
-rw-r--r--drivers/i2c/busses/i2c-gpio.c97
-rw-r--r--drivers/i2c/busses/i2c-i801.c4
-rw-r--r--drivers/i2c/busses/i2c-imx.c23
-rw-r--r--drivers/i2c/busses/i2c-mxs.c8
-rw-r--r--drivers/i2c/busses/i2c-owl.c495
-rw-r--r--drivers/i2c/busses/i2c-pasemi.c3
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c17
-rw-r--r--drivers/i2c/busses/i2c-qcom-geni.c673
-rw-r--r--drivers/i2c/busses/i2c-rcar.c73
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c4
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c10
-rw-r--r--drivers/i2c/busses/i2c-sprd.c8
-rw-r--r--drivers/i2c/busses/i2c-stu300.c12
-rw-r--r--drivers/i2c/busses/i2c-tegra.c90
-rw-r--r--drivers/i2c/busses/i2c-xlr.c11
-rw-r--r--drivers/i2c/i2c-core-acpi.c19
-rw-r--r--drivers/i2c/i2c-core-base.c85
-rw-r--r--drivers/i2c/i2c-core-slave.c8
-rw-r--r--drivers/i2c/i2c-mux.c4
-rw-r--r--drivers/i2c/muxes/i2c-mux-mlxcpld.c28
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca9541.c75
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c51
-rw-r--r--drivers/iio/temperature/mlx90614.c4
-rw-r--r--drivers/input/touchscreen/rohm_bu21023.c4
-rw-r--r--drivers/media/dvb-frontends/af9013.c8
-rw-r--r--drivers/media/dvb-frontends/drxk_hard.c4
-rw-r--r--drivers/media/dvb-frontends/rtl2830.c12
-rw-r--r--drivers/media/dvb-frontends/tda1004x.c6
-rw-r--r--drivers/media/tuners/tda18271-common.c8
-rw-r--r--drivers/mfd/88pm860x-i2c.c8
-rw-r--r--drivers/misc/eeprom/at24.c17
46 files changed, 2616 insertions, 620 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4f8df2ec87b1..451d4ae50e66 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -116,24 +116,21 @@ config I2C_I801
DH89xxCC (PCH)
Panther Point (PCH)
Lynx Point (PCH)
- Lynx Point-LP (PCH)
Avoton (SOC)
Wellsburg (PCH)
Coleto Creek (PCH)
Wildcat Point (PCH)
- Wildcat Point-LP (PCH)
BayTrail (SOC)
Braswell (SOC)
- Sunrise Point-H (PCH)
- Sunrise Point-LP (PCH)
- Kaby Lake-H (PCH)
+ Sunrise Point (PCH)
+ Kaby Lake (PCH)
DNV (SOC)
Broxton (SOC)
Lewisburg (PCH)
Gemini Lake (SOC)
- Cannon Lake-H (PCH)
- Cannon Lake-LP (PCH)
+ Cannon Lake (PCH)
Cedar Fork (PCH)
+ Ice Lake (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -762,6 +759,13 @@ config I2C_OMAP
Like OMAP1510/1610/1710/5912 and OMAP242x.
For details see http://www.ti.com/omap.
+config I2C_OWL
+ tristate "Actions Semiconductor Owl I2C Controller"
+ depends on ARCH_ACTIONS || COMPILE_TEST
+ help
+ Say Y here if you want to use the I2C bus controller on
+ the Actions Semiconductor Owl SoC's.
+
config I2C_PASEMI
tristate "PA Semi SMBus interface"
depends on PPC_PASEMI && PCI
@@ -828,6 +832,19 @@ config I2C_PXA_SLAVE
is necessary for systems where the PXA may be a target on the
I2C bus.
+config I2C_QCOM_GENI
+ tristate "Qualcomm Technologies Inc.'s GENI based I2C controller"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on QCOM_GENI_SE
+ help
+ This driver supports GENI serial engine based I2C controller in
+ master mode on the Qualcomm Technologies Inc.'s SoCs. If you say
+ yes to this option, support will be included for the built-in I2C
+ interface on the Qualcomm Technologies Inc.'s SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-qcom-geni.
+
config I2C_QUP
tristate "Qualcomm QUP based I2C controller"
depends on ARCH_QCOM
@@ -1330,4 +1347,15 @@ config I2C_ZX2967
This driver can also be built as a module. If so, the module will be
called i2c-zx2967.
+config I2C_FSI
+ tristate "FSI I2C driver"
+ depends on FSI
+ help
+ Driver for FSI bus attached I2C masters. These are I2C masters that
+ are connected to the system over an FSI bus, instead of the more
+ common PCI or MMIO interface.
+
+ This driver can also be built as a module. If so, the module will be
+ called as i2c-fsi.
+
endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 5a869144a0c5..18b26af82b1c 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
+obj-$(CONFIG_I2C_OWL) += i2c-owl.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
@@ -83,6 +84,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
+obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-geni.o
obj-$(CONFIG_I2C_QUP) += i2c-qup.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
@@ -137,5 +139,6 @@ obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+obj-$(CONFIG_I2C_FSI) += i2c-fsi.o
ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 95a80a8f81b5..134567f3019f 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -384,6 +384,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
if (status)
return status;
len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
+ /* fall through */
case I2C_SMBUS_I2C_BLOCK_DATA:
for (i = 0; i < len; i++) {
status = amd_ec_read(smbus, AMD_SMB_DATA + i,
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index 60e4d0e939a3..a4f956c6d567 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -111,22 +111,22 @@
#define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0)
enum aspeed_i2c_master_state {
+ ASPEED_I2C_MASTER_INACTIVE,
ASPEED_I2C_MASTER_START,
ASPEED_I2C_MASTER_TX_FIRST,
ASPEED_I2C_MASTER_TX,
ASPEED_I2C_MASTER_RX_FIRST,
ASPEED_I2C_MASTER_RX,
ASPEED_I2C_MASTER_STOP,
- ASPEED_I2C_MASTER_INACTIVE,
};
enum aspeed_i2c_slave_state {
+ ASPEED_I2C_SLAVE_STOP,
ASPEED_I2C_SLAVE_START,
ASPEED_I2C_SLAVE_READ_REQUESTED,
ASPEED_I2C_SLAVE_READ_PROCESSED,
ASPEED_I2C_SLAVE_WRITE_REQUESTED,
ASPEED_I2C_SLAVE_WRITE_RECEIVED,
- ASPEED_I2C_SLAVE_STOP,
};
struct aspeed_i2c_bus {
@@ -234,7 +234,6 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
bool irq_handled = true;
u8 value;
- spin_lock(&bus->lock);
if (!slave) {
irq_handled = false;
goto out;
@@ -325,7 +324,6 @@ static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
out:
- spin_unlock(&bus->lock);
return irq_handled;
}
#endif /* CONFIG_I2C_SLAVE */
@@ -389,7 +387,6 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
u8 recv_byte;
int ret;
- spin_lock(&bus->lock);
irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
/* Ack all interrupt bits. */
writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
@@ -407,7 +404,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
*/
ret = aspeed_i2c_is_irq_error(irq_status);
if (ret < 0) {
- dev_dbg(bus->dev, "received error interrupt: 0x%08x",
+ dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
irq_status);
bus->cmd_err = ret;
bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
@@ -416,7 +413,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
/* We are in an invalid state; reset bus to a known state. */
if (!bus->msgs) {
- dev_err(bus->dev, "bus in unknown state");
+ dev_err(bus->dev, "bus in unknown state\n");
bus->cmd_err = -EIO;
if (bus->master_state != ASPEED_I2C_MASTER_STOP)
aspeed_i2c_do_stop(bus);
@@ -431,7 +428,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
*/
if (bus->master_state == ASPEED_I2C_MASTER_START) {
if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
- pr_devel("no slave present at %02x", msg->addr);
+ pr_devel("no slave present at %02x\n", msg->addr);
status_ack |= ASPEED_I2CD_INTR_TX_NAK;
bus->cmd_err = -ENXIO;
aspeed_i2c_do_stop(bus);
@@ -451,11 +448,11 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
switch (bus->master_state) {
case ASPEED_I2C_MASTER_TX:
if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
- dev_dbg(bus->dev, "slave NACKed TX");
+ dev_dbg(bus->dev, "slave NACKed TX\n");
status_ack |= ASPEED_I2CD_INTR_TX_NAK;
goto error_and_stop;
} else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
- dev_err(bus->dev, "slave failed to ACK TX");
+ dev_err(bus->dev, "slave failed to ACK TX\n");
goto error_and_stop;
}
status_ack |= ASPEED_I2CD_INTR_TX_ACK;
@@ -478,7 +475,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
/* fallthrough intended */
case ASPEED_I2C_MASTER_RX:
if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
- dev_err(bus->dev, "master failed to RX");
+ dev_err(bus->dev, "master failed to RX\n");
goto error_and_stop;
}
status_ack |= ASPEED_I2CD_INTR_RX_DONE;
@@ -509,7 +506,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
goto out_no_complete;
case ASPEED_I2C_MASTER_STOP:
if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
- dev_err(bus->dev, "master failed to STOP");
+ dev_err(bus->dev, "master failed to STOP\n");
bus->cmd_err = -EIO;
/* Do not STOP as we have already tried. */
} else {
@@ -520,7 +517,7 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
goto out_complete;
case ASPEED_I2C_MASTER_INACTIVE:
dev_err(bus->dev,
- "master received interrupt 0x%08x, but is inactive",
+ "master received interrupt 0x%08x, but is inactive\n",
irq_status);
bus->cmd_err = -EIO;
/* Do not STOP as we should be inactive. */
@@ -547,22 +544,29 @@ out_no_complete:
dev_err(bus->dev,
"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
irq_status, status_ack);
- spin_unlock(&bus->lock);
return !!irq_status;
}
static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
{
struct aspeed_i2c_bus *bus = dev_id;
+ bool ret;
+
+ spin_lock(&bus->lock);
#if IS_ENABLED(CONFIG_I2C_SLAVE)
if (aspeed_i2c_slave_irq(bus)) {
dev_dbg(bus->dev, "irq handled by slave.\n");
- return IRQ_HANDLED;
+ ret = true;
+ goto out;
}
#endif /* CONFIG_I2C_SLAVE */
- return aspeed_i2c_master_irq(bus) ? IRQ_HANDLED : IRQ_NONE;
+ ret = aspeed_i2c_master_irq(bus);
+
+out:
+ spin_unlock(&bus->lock);
+ return ret ? IRQ_HANDLED : IRQ_NONE;
}
static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
@@ -851,7 +855,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
if (IS_ERR(bus->rst)) {
dev_err(&pdev->dev,
- "missing or invalid reset controller device tree entry");
+ "missing or invalid reset controller device tree entry\n");
return PTR_ERR(bus->rst);
}
reset_control_deassert(bus->rst);
@@ -868,7 +872,7 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev)
if (!match)
bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
else
- bus->get_clk_reg_val = match->data;
+ bus->get_clk_reg_val = (u32 (*)(u32))match->data;
/* Initialize the I2C adapter */
spin_lock_init(&bus->lock);
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 78792b4d6437..826d32049996 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -689,9 +689,9 @@ static int brcmstb_i2c_suspend(struct device *dev)
{
struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);
- i2c_lock_adapter(&i2c_dev->adapter);
+ i2c_lock_bus(&i2c_dev->adapter, I2C_LOCK_ROOT_ADAPTER);
i2c_dev->is_suspended = true;
- i2c_unlock_adapter(&i2c_dev->adapter);
+ i2c_unlock_bus(&i2c_dev->adapter, I2C_LOCK_ROOT_ADAPTER);
return 0;
}
@@ -700,10 +700,10 @@ static int brcmstb_i2c_resume(struct device *dev)
{
struct brcmstb_i2c_dev *i2c_dev = dev_get_drvdata(dev);
- i2c_lock_adapter(&i2c_dev->adapter);
+ i2c_lock_bus(&i2c_dev->adapter, I2C_LOCK_ROOT_ADAPTER);
brcmstb_i2c_set_bsc_reg_defaults(i2c_dev);
i2c_dev->is_suspended = false;
- i2c_unlock_adapter(&i2c_dev->adapter);
+ i2c_unlock_bus(&i2c_dev->adapter, I2C_LOCK_ROOT_ADAPTER);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 7379043711df..11caafa0e050 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -718,14 +718,14 @@ static int i2c_davinci_cpufreq_transition(struct notifier_block *nb,
dev = container_of(nb, struct davinci_i2c_dev, freq_transition);
- i2c_lock_adapter(&dev->adapter);
+ i2c_lock_bus(&dev->adapter, I2C_LOCK_ROOT_ADAPTER);
if (val == CPUFREQ_PRECHANGE) {
davinci_i2c_reset_ctrl(dev, 0);
} else if (val == CPUFREQ_POSTCHANGE) {
i2c_davinci_calc_clk_dividers(dev);
davinci_i2c_reset_ctrl(dev, 1);
}
- i2c_unlock_adapter(&dev->adapter);
+ i2c_unlock_bus(&dev->adapter, I2C_LOCK_ROOT_ADAPTER);
return 0;
}
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index dbda8c9c8a1c..a2a275cfc1f6 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -1,15 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Intel BayTrail PMIC I2C bus semaphore implementaion
* Copyright (c) 2014, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
*/
#include <linux/delay.h>
#include <linux/device.h>
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 48914dfc8ce8..69ec4a791f23 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Synopsys DesignWare I2C adapter driver.
*
@@ -6,20 +7,6 @@
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- * ----------------------------------------------------------------------------
- *
*/
#include <linux/clk.h>
#include <linux/delay.h>
@@ -31,6 +18,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/swab.h>
#include "i2c-designware-core.h"
@@ -94,6 +82,40 @@ void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
}
}
+/**
+ * i2c_dw_set_reg_access() - Set register access flags
+ * @dev: device private data
+ *
+ * Autodetects needed register access mode and sets access flags accordingly.
+ * This must be called before doing any other register access.
+ */
+int i2c_dw_set_reg_access(struct dw_i2c_dev *dev)
+{
+ u32 reg;
+ int ret;
+
+ ret = i2c_dw_acquire_lock(dev);
+ if (ret)
+ return ret;
+
+ reg = dw_readl(dev, DW_IC_COMP_TYPE);
+ i2c_dw_release_lock(dev);
+
+ if (reg == swab32(DW_IC_COMP_TYPE_VALUE)) {
+ /* Configure register endianess access */
+ dev->flags |= ACCESS_SWAP;
+ } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+ /* Configure register access mode 16bit */
+ dev->flags |= ACCESS_16BIT;
+ } else if (reg != DW_IC_COMP_TYPE_VALUE) {
+ dev_err(dev->dev,
+ "Unknown Synopsys component type: 0x%08x\n", reg);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
{
/*
@@ -149,6 +171,47 @@ u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
}
+int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev)
+{
+ u32 reg;
+ int ret;
+
+ ret = i2c_dw_acquire_lock(dev);
+ if (ret)
+ return ret;
+
+ /* Configure SDA Hold Time if required */
+ reg = dw_readl(dev, DW_IC_COMP_VERSION);
+ if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
+ if (!dev->sda_hold_time) {
+ /* Keep previous hold time setting if no one set it */
+ dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+ }
+
+ /*
+ * Workaround for avoiding TX arbitration lost in case I2C
+ * slave pulls SDA down "too quickly" after falling egde of
+ * SCL by enabling non-zero SDA RX hold. Specification says it
+ * extends incoming SDA low to high transition while SCL is
+ * high but it apprears to help also above issue.
+ */
+ if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+ dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+
+ dev_dbg(dev->dev, "SDA Hold Time TX:RX = %d:%d\n",
+ dev->sda_hold_time & ~(u32)DW_IC_SDA_HOLD_RX_MASK,
+ dev->sda_hold_time >> DW_IC_SDA_HOLD_RX_SHIFT);
+ } else if (dev->sda_hold_time) {
+ dev_warn(dev->dev,
+ "Hardware too old to adjust SDA hold time.\n");
+ dev->sda_hold_time = 0;
+ }
+
+ i2c_dw_release_lock(dev);
+
+ return 0;
+}
+
void __i2c_dw_disable(struct dw_i2c_dev *dev)
{
int timeout = 100;
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index d690e648bc01..e367b1af4ab2 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Synopsys DesignWare I2C adapter driver.
*
@@ -6,20 +7,6 @@
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- * ----------------------------------------------------------------------------
- *
*/
#include <linux/i2c.h>
@@ -212,7 +199,8 @@
* @tx_fifo_depth: depth of the hardware tx fifo
* @rx_fifo_depth: depth of the hardware rx fifo
* @rx_outstanding: current master-rx elements in tx fifo
- * @clk_freq: bus clock frequency
+ * @timings: bus clock frequency, SDA hold and other timings
+ * @sda_hold_time: SDA hold value
* @ss_hcnt: standard speed HCNT value
* @ss_lcnt: standard speed LCNT value
* @fs_hcnt: fast speed HCNT value
@@ -264,10 +252,8 @@ struct dw_i2c_dev {
unsigned int tx_fifo_depth;
unsigned int rx_fifo_depth;
int rx_outstanding;
- u32 clk_freq;
+ struct i2c_timings timings;
u32 sda_hold_time;
- u32 sda_falling_time;
- u32 scl_falling_time;
u16 ss_hcnt;
u16 ss_lcnt;
u16 fs_hcnt;
@@ -295,8 +281,10 @@ struct dw_i2c_dev {
u32 dw_readl(struct dw_i2c_dev *dev, int offset);
void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
+int i2c_dw_set_reg_access(struct dw_i2c_dev *dev);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
+int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev);
unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare);
int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index 27436a937492..e18442b9973a 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Synopsys DesignWare I2C adapter driver (master only).
*
@@ -6,20 +7,6 @@
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- * ----------------------------------------------------------------------------
- *
*/
#include <linux/delay.h>
#include <linux/err.h>
@@ -45,90 +32,79 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
dw_writel(dev, dev->master_cfg, DW_IC_CON);
}
-/**
- * i2c_dw_init() - Initialize the designware I2C master hardware
- * @dev: device private data
- *
- * This functions configures and enables the I2C master.
- * This function is called during I2C init function, and in case of timeout at
- * run time.
- */
-static int i2c_dw_init_master(struct dw_i2c_dev *dev)
+static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev)
{
- u32 hcnt, lcnt;
- u32 reg, comp_param1;
+ u32 ic_clk = i2c_dw_clk_rate(dev);
+ const char *mode_str, *fp_str = "";
+ u32 comp_param1;
u32 sda_falling_time, scl_falling_time;
+ struct i2c_timings *t = &dev->timings;
int ret;
ret = i2c_dw_acquire_lock(dev);
if (ret)
return ret;
-
- reg = dw_readl(dev, DW_IC_COMP_TYPE);
- if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
- /* Configure register endianess access */
- dev->flags |= ACCESS_SWAP;
- } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
- /* Configure register access mode 16bit */
- dev->flags |= ACCESS_16BIT;
- } else if (reg != DW_IC_COMP_TYPE_VALUE) {
- dev_err(dev->dev,
- "Unknown Synopsys component type: 0x%08x\n", reg);
- i2c_dw_release_lock(dev);
- return -ENODEV;
- }
-
comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+ i2c_dw_release_lock(dev);
- /* Disable the adapter */
- __i2c_dw_disable(dev);
-
- /* Set standard and fast speed deviders for high/low periods */
-
- sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
- scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+ /* Set standard and fast speed dividers for high/low periods */
+ sda_falling_time = t->sda_fall_ns ?: 300; /* ns */
+ scl_falling_time = t->scl_fall_ns ?: 300; /* ns */
- /* Set SCL timing parameters for standard-mode */
- if (dev->ss_hcnt && dev->ss_lcnt) {
- hcnt = dev->ss_hcnt;
- lcnt = dev->ss_lcnt;
- } else {
- hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+ /* Calculate SCL timing parameters for standard mode if not set */
+ if (!dev->ss_hcnt || !dev->ss_lcnt) {
+ dev->ss_hcnt =
+ i2c_dw_scl_hcnt(ic_clk,
4000, /* tHD;STA = tHIGH = 4.0 us */
sda_falling_time,
0, /* 0: DW default, 1: Ideal */
0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+ dev->ss_lcnt =
+ i2c_dw_scl_lcnt(ic_clk,
4700, /* tLOW = 4.7 us */
scl_falling_time,
0); /* No offset */
}
- dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
- dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
-
- /* Set SCL timing parameters for fast-mode or fast-mode plus */
- if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
- hcnt = dev->fp_hcnt;
- lcnt = dev->fp_lcnt;
- } else if (dev->fs_hcnt && dev->fs_lcnt) {
- hcnt = dev->fs_hcnt;
- lcnt = dev->fs_lcnt;
- } else {
- hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+ dev_dbg(dev->dev, "Standard Mode HCNT:LCNT = %d:%d\n",
+ dev->ss_hcnt, dev->ss_lcnt);
+
+ /*
+ * Set SCL timing parameters for fast mode or fast mode plus. Only
+ * difference is the timing parameter values since the registers are
+ * the same.
+ */
+ if (t->bus_freq_hz == 1000000) {
+ /*
+ * Check are fast mode plus parameters available and use
+ * fast mode if not.
+ */
+ if (dev->fp_hcnt && dev->fp_lcnt) {
+ dev->fs_hcnt = dev->fp_hcnt;
+ dev->fs_lcnt = dev->fp_lcnt;
+ fp_str = " Plus";
+ }
+ }
+ /*
+ * Calculate SCL timing parameters for fast mode if not set. They are
+ * needed also in high speed mode.
+ */
+ if (!dev->fs_hcnt || !dev->fs_lcnt) {
+ dev->fs_hcnt =
+ i2c_dw_scl_hcnt(ic_clk,
600, /* tHD;STA = tHIGH = 0.6 us */
sda_falling_time,
0, /* 0: DW default, 1: Ideal */
0); /* No offset */
- lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+ dev->fs_lcnt =
+ i2c_dw_scl_lcnt(ic_clk,
1300, /* tLOW = 1.3 us */
scl_falling_time,
0); /* No offset */
}
- dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
- dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+ dev_dbg(dev->dev, "Fast Mode%s HCNT:LCNT = %d:%d\n",
+ fp_str, dev->fs_hcnt, dev->fs_lcnt);
+ /* Check is high speed possible and fall back to fast mode if not */
if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
DW_IC_CON_SPEED_HIGH) {
if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
@@ -136,37 +112,70 @@ static int i2c_dw_init_master(struct dw_i2c_dev *dev)
dev_err(dev->dev, "High Speed not supported!\n");
dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+ dev->hs_hcnt = 0;
+ dev->hs_lcnt = 0;
} else if (dev->hs_hcnt && dev->hs_lcnt) {
- hcnt = dev->hs_hcnt;
- lcnt = dev->hs_lcnt;
- dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
- dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
- dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
- hcnt, lcnt);
+ dev_dbg(dev->dev, "High Speed Mode HCNT:LCNT = %d:%d\n",
+ dev->hs_hcnt, dev->hs_lcnt);
}
}
- /* Configure SDA Hold Time if required */
- reg = dw_readl(dev, DW_IC_COMP_VERSION);
- if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
- if (!dev->sda_hold_time) {
- /* Keep previous hold time setting if no one set it */
- dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
- }
- /*
- * Workaround for avoiding TX arbitration lost in case I2C
- * slave pulls SDA down "too quickly" after falling egde of
- * SCL by enabling non-zero SDA RX hold. Specification says it
- * extends incoming SDA low to high transition while SCL is
- * high but it apprears to help also above issue.
- */
- if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
- dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
- dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
- } else if (dev->sda_hold_time) {
- dev_warn(dev->dev,
- "Hardware too old to adjust SDA hold time.\n");
+ ret = i2c_dw_set_sda_hold(dev);
+ if (ret)
+ goto out;
+
+ switch (dev->master_cfg & DW_IC_CON_SPEED_MASK) {
+ case DW_IC_CON_SPEED_STD:
+ mode_str = "Standard Mode";
+ break;
+ case DW_IC_CON_SPEED_HIGH:
+ mode_str = "High Speed Mode";
+ break;
+ default:
+ mode_str = "Fast Mode";
}
+ dev_dbg(dev->dev, "Bus speed: %s%s\n", mode_str, fp_str);
+
+out:
+ return ret;
+}
+
+/**
+ * i2c_dw_init() - Initialize the designware I2C master hardware
+ * @dev: device private data
+ *
+ * This functions configures and enables the I2C master.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+static int i2c_dw_init_master(struct dw_i2c_dev *dev)
+{
+ int ret;
+
+ ret = i2c_dw_acquire_lock(dev);
+ if (ret)
+ return ret;
+
+ /* Disable the adapter */
+ __i2c_dw_disable(dev);
+
+ /* Write standard speed timing parameters */
+ dw_writel(dev, dev->ss_hcnt, DW_IC_SS_SCL_HCNT);
+ dw_writel(dev, dev->ss_lcnt, DW_IC_SS_SCL_LCNT);
+
+ /* Write fast mode/fast mode plus timing parameters */
+ dw_writel(dev, dev->fs_hcnt, DW_IC_FS_SCL_HCNT);
+ dw_writel(dev, dev->fs_lcnt, DW_IC_FS_SCL_LCNT);
+
+ /* Write high speed timing parameters if supported */
+ if (dev->hs_hcnt && dev->hs_lcnt) {
+ dw_writel(dev, dev->hs_hcnt, DW_IC_HS_SCL_HCNT);
+ dw_writel(dev, dev->hs_lcnt, DW_IC_HS_SCL_LCNT);
+ }
+
+ /* Write SDA hold time if supported */
+ if (dev->sda_hold_time)
+ dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
i2c_dw_configure_fifo_master(dev);
i2c_dw_release_lock(dev);
@@ -253,13 +262,6 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
break;
}
- if (msgs[dev->msg_write_idx].len == 0) {
- dev_err(dev->dev,
- "%s: invalid message length\n", __func__);
- dev->msg_err = -EINVAL;
- break;
- }
-
if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
/* new i2c_msg */
buf = msgs[dev->msg_write_idx].buf;
@@ -502,6 +504,10 @@ static const struct i2c_algorithm i2c_dw_algo = {
.functionality = i2c_dw_func,
};
+static const struct i2c_adapter_quirks i2c_dw_quirks = {
+ .flags = I2C_AQ_NO_ZERO_LEN,
+};
+
static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
{
u32 stat;
@@ -681,6 +687,14 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
dev->disable = i2c_dw_disable;
dev->disable_int = i2c_dw_disable_int;
+ ret = i2c_dw_set_reg_access(dev);
+ if (ret)
+ return ret;
+
+ ret = i2c_dw_set_timings_master(dev);
+ if (ret)
+ return ret;
+
ret = dev->init(dev);
if (ret)
return ret;
@@ -689,6 +703,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
"Synopsys DesignWare I2C adapter");
adap->retries = 3;
adap->algo = &i2c_dw_algo;
+ adap->quirks = &i2c_dw_quirks;
adap->dev.parent = dev->dev;
i2c_set_adapdata(adap, dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 86e1bd0b82e9..d50f80487214 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Synopsys DesignWare I2C adapter driver (master only).
*
@@ -7,22 +8,7 @@
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
* Copyright (C) 2011, 2015, 2016 Intel Corporation.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- * ----------------------------------------------------------------------------
- *
*/
-
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/err.h>
@@ -105,6 +91,7 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
case 0x0817:
c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
c->bus_cfg |= DW_IC_CON_SPEED_STD;
+ /* fall through */
case 0x0818:
case 0x0819:
c->bus_num = pdev->device - 0x817 + 3;
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5660daf6c92e..1a8d2da5b000 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Synopsys DesignWare I2C adapter driver.
*
@@ -6,20 +7,6 @@
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- * ----------------------------------------------------------------------------
- *
*/
#include <linux/acpi.h>
#include <linux/clk-provider.h>
@@ -96,6 +83,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
static int dw_i2c_acpi_configure(struct platform_device *pdev)
{
struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct i2c_timings *t = &dev->timings;
u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
acpi_handle handle = ACPI_HANDLE(&pdev->dev);
const struct acpi_device_id *id;
@@ -115,7 +103,7 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, &hs_ht);
dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &fs_ht);
- switch (dev->clk_freq) {
+ switch (t->bus_freq_hz) {
case 100000:
dev->sda_hold_time = ss_ht;
break;
@@ -175,6 +163,8 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
{
+ struct i2c_timings *t = &dev->timings;
+
dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
@@ -182,7 +172,7 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
dev->mode = DW_IC_MASTER;
- switch (dev->clk_freq) {
+ switch (t->bus_freq_hz) {
case 100000:
dev->master_cfg |= DW_IC_CON_SPEED_STD;
break;
@@ -240,7 +230,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct i2c_adapter *adap;
struct dw_i2c_dev *dev;
- u32 acpi_speed, ht = 0;
+ struct i2c_timings *t;
+ u32 acpi_speed;
struct resource *mem;
int i, irq, ret;
static const int supported_speeds[] = {
@@ -272,18 +263,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
reset_control_deassert(dev->rst);
}
- if (pdata) {
- dev->clk_freq = pdata->i2c_scl_freq;
- } else {
- device_property_read_u32(&pdev->dev, "i2c-sda-hold-time-ns",
- &ht);
- device_property_read_u32(&pdev->dev, "i2c-sda-falling-time-ns",
- &dev->sda_falling_time);
- device_property_read_u32(&pdev->dev, "i2c-scl-falling-time-ns",
- &dev->scl_falling_time);
- device_property_read_u32(&pdev->dev, "clock-frequency",
- &dev->clk_freq);
- }
+ t = &dev->timings;
+ if (pdata)
+ t->bus_freq_hz = pdata->i2c_scl_freq;
+ else
+ i2c_parse_fw_timings(&pdev->dev, t, false);
acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
/*
@@ -300,12 +284,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
* Find bus speed from the "clock-frequency" device property, ACPI
* or by using fast mode if neither is set.
*/
- if (acpi_speed && dev->clk_freq)
- dev->clk_freq = min(dev->clk_freq, acpi_speed);
- else if (acpi_speed || dev->clk_freq)
- dev->clk_freq = max(dev->clk_freq, acpi_speed);
+ if (acpi_speed && t->bus_freq_hz)
+ t->bus_freq_hz = min(t->bus_freq_hz, acpi_speed);
+ else if (acpi_speed || t->bus_freq_hz)
+ t->bus_freq_hz = max(t->bus_freq_hz, acpi_speed);
else
- dev->clk_freq = 400000;
+ t->bus_freq_hz = 400000;
if (has_acpi_companion(&pdev->dev))
dw_i2c_acpi_configure(pdev);
@@ -314,11 +298,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
* Only standard mode at 100kHz, fast mode at 400kHz,
* fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
*/
- if (dev->clk_freq != 100000 && dev->clk_freq != 400000
- && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
+ if (t->bus_freq_hz != 100000 && t->bus_freq_hz != 400000 &&
+ t->bus_freq_hz != 1000000 && t->bus_freq_hz != 3400000) {
dev_err(&pdev->dev,
"%d Hz is unsupported, only 100kHz, 400kHz, 1MHz and 3.4MHz are supported\n",
- dev->clk_freq);
+ t->bus_freq_hz);
ret = -EINVAL;
goto exit_reset;
}
@@ -334,12 +318,14 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
dev->clk = devm_clk_get(&pdev->dev, NULL);
if (!i2c_dw_prepare_clk(dev, true)) {
+ u64 clk_khz;
+
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+ clk_khz = dev->get_clk_rate_khz(dev);
- if (!dev->sda_hold_time && ht)
- dev->sda_hold_time = div_u64(
- (u64)dev->get_clk_rate_khz(dev) * ht + 500000,
- 1000000);
+ if (!dev->sda_hold_time && t->sda_hold_ns)
+ dev->sda_hold_time =
+ div_u64(clk_khz * t->sda_hold_ns + 500000, 1000000);
}
dw_i2c_set_fifo_size(dev, pdev->id);
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 8ce2cd368477..e7f9305b2dd9 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Synopsys DesignWare I2C adapter driver (slave only).
*
* Based on the Synopsys DesignWare I2C adapter driver (master).
*
* Copyright (C) 2016 Synopsys Inc.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- * ----------------------------------------------------------------------------
- *
*/
#include <linux/delay.h>
#include <linux/err.h>
@@ -51,53 +38,18 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
*/
static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
{
- u32 reg, comp_param1;
int ret;
ret = i2c_dw_acquire_lock(dev);
if (ret)
return ret;
- reg = dw_readl(dev, DW_IC_COMP_TYPE);
- if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
- /* Configure register endianness access. */
- dev->flags |= ACCESS_SWAP;
- } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
- /* Configure register access mode 16bit. */
- dev->flags |= ACCESS_16BIT;
- } else if (reg != DW_IC_COMP_TYPE_VALUE) {
- dev_err(dev->dev,
- "Unknown Synopsys component type: 0x%08x\n", reg);
- i2c_dw_release_lock(dev);
- return -ENODEV;
- }
-
- comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
-
/* Disable the adapter. */
__i2c_dw_disable(dev);
- /* Configure SDA Hold Time if required. */
- reg = dw_readl(dev, DW_IC_COMP_VERSION);
- if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
- if (!dev->sda_hold_time) {
- /* Keep previous hold time setting if no one set it. */
- dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
- }
- /*
- * Workaround for avoiding TX arbitration lost in case I2C
- * slave pulls SDA down "too quickly" after falling egde of
- * SCL by enabling non-zero SDA RX hold. Specification says it
- * extends incoming SDA low to high transition while SCL is
- * high but it apprears to help also above issue.
- */
- if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
- dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+ /* Write SDA hold time if supported */
+ if (dev->sda_hold_time)
dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
- } else {
- dev_warn(dev->dev,
- "Hardware too old to adjust SDA hold time.\n");
- }
i2c_dw_configure_fifo_slave(dev);
i2c_dw_release_lock(dev);
@@ -299,6 +251,14 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
dev->disable = i2c_dw_disable;
dev->disable_int = i2c_dw_disable_int;
+ ret = i2c_dw_set_reg_access(dev);
+ if (ret)
+ return ret;
+
+ ret = i2c_dw_set_sda_hold(dev);
+ if (ret)
+ return ret;
+
ret = dev->init(dev);
if (ret)
return ret;
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index de82ad8ff534..c1ce2299a76e 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -176,7 +176,10 @@
#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(100))
-#define HSI2C_EXYNOS7 BIT(0)
+enum i2c_type_exynos {
+ I2C_TYPE_EXYNOS5,
+ I2C_TYPE_EXYNOS7,
+};
struct exynos5_i2c {
struct i2c_adapter adap;
@@ -212,27 +215,30 @@ struct exynos5_i2c {
/**
* struct exynos_hsi2c_variant - platform specific HSI2C driver data
* @fifo_depth: the fifo depth supported by the HSI2C module
+ * @hw: the hardware variant of Exynos I2C controller
*
* Specifies platform specific configuration of HSI2C module.
* Note: A structure for driver specific platform data is used for future
* expansion of its usage.
*/
struct exynos_hsi2c_variant {
- unsigned int fifo_depth;
- unsigned int hw;
+ unsigned int fifo_depth;
+ enum i2c_type_exynos hw;
};
static const struct exynos_hsi2c_variant exynos5250_hsi2c_data = {
.fifo_depth = 64,
+ .hw = I2C_TYPE_EXYNOS5,
};
static const struct exynos_hsi2c_variant exynos5260_hsi2c_data = {
.fifo_depth = 16,
+ .hw = I2C_TYPE_EXYNOS5,
};
static const struct exynos_hsi2c_variant exynos7_hsi2c_data = {
.fifo_depth = 16,
- .hw = HSI2C_EXYNOS7,
+ .hw = I2C_TYPE_EXYNOS7,
};
static const struct of_device_id exynos5_i2c_match[] = {
@@ -300,7 +306,7 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, bool hs_timings)
*/
t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
temp = clkin / op_clk - 8 - t_ftl_cycle;
- if (i2c->variant->hw != HSI2C_EXYNOS7)
+ if (i2c->variant->hw != I2C_TYPE_EXYNOS7)
temp -= t_ftl_cycle;
div = temp / 512;
clk_cycle = temp / (div + 1) - 2;
@@ -424,7 +430,7 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
writel(int_status, i2c->regs + HSI2C_INT_STATUS);
/* handle interrupt related to the transfer status */
- if (i2c->variant->hw == HSI2C_EXYNOS7) {
+ if (i2c->variant->hw == I2C_TYPE_EXYNOS7) {
if (int_status & HSI2C_INT_TRANS_DONE) {
i2c->trans_done = 1;
i2c->state = 0;
@@ -571,7 +577,7 @@ static void exynos5_i2c_bus_check(struct exynos5_i2c *i2c)
{
unsigned long timeout;
- if (i2c->variant->hw != HSI2C_EXYNOS7)
+ if (i2c->variant->hw != I2C_TYPE_EXYNOS7)
return;
/*
@@ -612,7 +618,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
unsigned long flags;
unsigned short trig_lvl;
- if (i2c->variant->hw == HSI2C_EXYNOS7)
+ if (i2c->variant->hw == I2C_TYPE_EXYNOS7)
int_en |= HSI2C_INT_I2C_TRANS;
else
int_en |= HSI2C_INT_I2C;
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
new file mode 100644
index 000000000000..1e2be2219a60
--- /dev/null
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * FSI-attached I2C master algorithm
+ *
+ * Copyright 2018 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fsi.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#define FSI_ENGID_I2C 0x7
+
+#define I2C_DEFAULT_CLK_DIV 6
+
+/* i2c registers */
+#define I2C_FSI_FIFO 0x00
+#define I2C_FSI_CMD 0x04
+#define I2C_FSI_MODE 0x08
+#define I2C_FSI_WATER_MARK 0x0C
+#define I2C_FSI_INT_MASK 0x10
+#define I2C_FSI_INT_COND 0x14
+#define I2C_FSI_OR_INT_MASK 0x14
+#define I2C_FSI_INTS 0x18
+#define I2C_FSI_AND_INT_MASK 0x18
+#define I2C_FSI_STAT 0x1C
+#define I2C_FSI_RESET_I2C 0x1C
+#define I2C_FSI_ESTAT 0x20
+#define I2C_FSI_RESET_ERR 0x20
+#define I2C_FSI_RESID_LEN 0x24
+#define I2C_FSI_SET_SCL 0x24
+#define I2C_FSI_PORT_BUSY 0x28
+#define I2C_FSI_RESET_SCL 0x2C
+#define I2C_FSI_SET_SDA 0x30
+#define I2C_FSI_RESET_SDA 0x34
+
+/* cmd register */
+#define I2C_CMD_WITH_START BIT(31)
+#define I2C_CMD_WITH_ADDR BIT(30)
+#define I2C_CMD_RD_CONT BIT(29)
+#define I2C_CMD_WITH_STOP BIT(28)
+#define I2C_CMD_FORCELAUNCH BIT(27)
+#define I2C_CMD_ADDR GENMASK(23, 17)
+#define I2C_CMD_READ BIT(16)
+#define I2C_CMD_LEN GENMASK(15, 0)
+
+/* mode register */
+#define I2C_MODE_CLKDIV GENMASK(31, 16)
+#define I2C_MODE_PORT GENMASK(15, 10)
+#define I2C_MODE_ENHANCED BIT(3)
+#define I2C_MODE_DIAG BIT(2)
+#define I2C_MODE_PACE_ALLOW BIT(1)
+#define I2C_MODE_WRAP BIT(0)
+
+/* watermark register */
+#define I2C_WATERMARK_HI GENMASK(15, 12)
+#define I2C_WATERMARK_LO GENMASK(7, 4)
+
+#define I2C_FIFO_HI_LVL 4
+#define I2C_FIFO_LO_LVL 4
+
+/* interrupt register */
+#define I2C_INT_INV_CMD BIT(15)
+#define I2C_INT_PARITY BIT(14)
+#define I2C_INT_BE_OVERRUN BIT(13)
+#define I2C_INT_BE_ACCESS BIT(12)
+#define I2C_INT_LOST_ARB BIT(11)
+#define I2C_INT_NACK BIT(10)
+#define I2C_INT_DAT_REQ BIT(9)
+#define I2C_INT_CMD_COMP BIT(8)
+#define I2C_INT_STOP_ERR BIT(7)
+#define I2C_INT_BUSY BIT(6)
+#define I2C_INT_IDLE BIT(5)
+
+/* status register */
+#define I2C_STAT_INV_CMD BIT(31)
+#define I2C_STAT_PARITY BIT(30)
+#define I2C_STAT_BE_OVERRUN BIT(29)
+#define I2C_STAT_BE_ACCESS BIT(28)
+#define I2C_STAT_LOST_ARB BIT(27)
+#define I2C_STAT_NACK BIT(26)
+#define I2C_STAT_DAT_REQ BIT(25)
+#define I2C_STAT_CMD_COMP BIT(24)
+#define I2C_STAT_STOP_ERR BIT(23)
+#define I2C_STAT_MAX_PORT GENMASK(19, 16)
+#define I2C_STAT_ANY_INT BIT(15)
+#define I2C_STAT_SCL_IN BIT(11)
+#define I2C_STAT_SDA_IN BIT(10)
+#define I2C_STAT_PORT_BUSY BIT(9)
+#define I2C_STAT_SELF_BUSY BIT(8)
+#define I2C_STAT_FIFO_COUNT GENMASK(7, 0)
+
+#define I2C_STAT_ERR (I2C_STAT_INV_CMD | \
+ I2C_STAT_PARITY | \
+ I2C_STAT_BE_OVERRUN | \
+ I2C_STAT_BE_ACCESS | \
+ I2C_STAT_LOST_ARB | \
+ I2C_STAT_NACK | \
+ I2C_STAT_STOP_ERR)
+#define I2C_STAT_ANY_RESP (I2C_STAT_ERR | \
+ I2C_STAT_DAT_REQ | \
+ I2C_STAT_CMD_COMP)
+
+/* extended status register */
+#define I2C_ESTAT_FIFO_SZ GENMASK(31, 24)
+#define I2C_ESTAT_SCL_IN_SY BIT(15)
+#define I2C_ESTAT_SDA_IN_SY BIT(14)
+#define I2C_ESTAT_S_SCL BIT(13)
+#define I2C_ESTAT_S_SDA BIT(12)
+#define I2C_ESTAT_M_SCL BIT(11)
+#define I2C_ESTAT_M_SDA BIT(10)
+#define I2C_ESTAT_HI_WATER BIT(9)
+#define I2C_ESTAT_LO_WATER BIT(8)
+#define I2C_ESTAT_PORT_BUSY BIT(7)
+#define I2C_ESTAT_SELF_BUSY BIT(6)
+#define I2C_ESTAT_VERSION GENMASK(4, 0)
+
+/* port busy register */
+#define I2C_PORT_BUSY_RESET BIT(31)
+
+/* wait for command complete or data request */
+#define I2C_CMD_SLEEP_MAX_US 500
+#define I2C_CMD_SLEEP_MIN_US 50
+
+/* wait after reset; choose time from legacy driver */
+#define I2C_RESET_SLEEP_MAX_US 2000
+#define I2C_RESET_SLEEP_MIN_US 1000
+
+/* choose timeout length from legacy driver; it's well tested */
+#define I2C_ABORT_TIMEOUT msecs_to_jiffies(100)
+
+struct fsi_i2c_master {
+ struct fsi_device *fsi;
+ u8 fifo_size;
+ struct list_head ports;
+ struct mutex lock;
+};
+
+struct fsi_i2c_port {
+ struct list_head list;
+ struct i2c_adapter adapter;
+ struct fsi_i2c_master *master;
+ u16 port;
+ u16 xfrd;
+};
+
+static int fsi_i2c_read_reg(struct fsi_device *fsi, unsigned int reg,
+ u32 *data)
+{
+ int rc;
+ __be32 data_be;
+
+ rc = fsi_device_read(fsi, reg, &data_be, sizeof(data_be));
+ if (rc)
+ return rc;
+
+ *data = be32_to_cpu(data_be);
+
+ return 0;
+}
+
+static int fsi_i2c_write_reg(struct fsi_device *fsi, unsigned int reg,
+ u32 *data)
+{
+ __be32 data_be = cpu_to_be32p(data);
+
+ return fsi_device_write(fsi, reg, &data_be, sizeof(data_be));
+}
+
+static int fsi_i2c_dev_init(struct fsi_i2c_master *i2c)
+{
+ int rc;
+ u32 mode = I2C_MODE_ENHANCED, extended_status, watermark;
+ u32 interrupt = 0;
+
+ /* since we use polling, disable interrupts */
+ rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_INT_MASK, &interrupt);
+ if (rc)
+ return rc;
+
+ mode |= FIELD_PREP(I2C_MODE_CLKDIV, I2C_DEFAULT_CLK_DIV);
+ rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+ if (rc)
+ return rc;
+
+ rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_ESTAT, &extended_status);
+ if (rc)
+ return rc;
+
+ i2c->fifo_size = FIELD_GET(I2C_ESTAT_FIFO_SZ, extended_status);
+ watermark = FIELD_PREP(I2C_WATERMARK_HI,
+ i2c->fifo_size - I2C_FIFO_HI_LVL);
+ watermark |= FIELD_PREP(I2C_WATERMARK_LO, I2C_FIFO_LO_LVL);
+
+ return fsi_i2c_write_reg(i2c->fsi, I2C_FSI_WATER_MARK, &watermark);
+}
+
+static int fsi_i2c_set_port(struct fsi_i2c_port *port)
+{
+ int rc;
+ struct fsi_device *fsi = port->master->fsi;
+ u32 mode, dummy = 0;
+
+ rc = fsi_i2c_read_reg(fsi, I2C_FSI_MODE, &mode);
+ if (rc)
+ return rc;
+
+ if (FIELD_GET(I2C_MODE_PORT, mode) == port->port)
+ return 0;
+
+ mode = (mode & ~I2C_MODE_PORT) | FIELD_PREP(I2C_MODE_PORT, port->port);
+ rc = fsi_i2c_write_reg(fsi, I2C_FSI_MODE, &mode);
+ if (rc)
+ return rc;
+
+ /* reset engine when port is changed */
+ return fsi_i2c_write_reg(fsi, I2C_FSI_RESET_ERR, &dummy);
+}
+
+static int fsi_i2c_start(struct fsi_i2c_port *port, struct i2c_msg *msg,
+ bool stop)
+{
+ struct fsi_i2c_master *i2c = port->master;
+ u32 cmd = I2C_CMD_WITH_START | I2C_CMD_WITH_ADDR;
+
+ port->xfrd = 0;
+
+ if (msg->flags & I2C_M_RD)
+ cmd |= I2C_CMD_READ;
+
+ if (stop || msg->flags & I2C_M_STOP)
+ cmd |= I2C_CMD_WITH_STOP;
+
+ cmd |= FIELD_PREP(I2C_CMD_ADDR, msg->addr);
+ cmd |= FIELD_PREP(I2C_CMD_LEN, msg->len);
+
+ return fsi_i2c_write_reg(i2c->fsi, I2C_FSI_CMD, &cmd);
+}
+
+static int fsi_i2c_get_op_bytes(int op_bytes)
+{
+ /* fsi is limited to max 4 byte aligned ops */
+ if (op_bytes > 4)
+ return 4;
+ else if (op_bytes == 3)
+ return 2;
+ return op_bytes;
+}
+
+static int fsi_i2c_write_fifo(struct fsi_i2c_port *port, struct i2c_msg *msg,
+ u8 fifo_count)
+{
+ int write;
+ int rc;
+ struct fsi_i2c_master *i2c = port->master;
+ int bytes_to_write = i2c->fifo_size - fifo_count;
+ int bytes_remaining = msg->len - port->xfrd;
+
+ bytes_to_write = min(bytes_to_write, bytes_remaining);
+
+ while (bytes_to_write) {
+ write = fsi_i2c_get_op_bytes(bytes_to_write);
+
+ rc = fsi_device_write(i2c->fsi, I2C_FSI_FIFO,
+ &msg->buf[port->xfrd], write);
+ if (rc)
+ return rc;
+
+ port->xfrd += write;
+ bytes_to_write -= write;
+ }
+
+ return 0;
+}
+
+static int fsi_i2c_read_fifo(struct fsi_i2c_port *port, struct i2c_msg *msg,
+ u8 fifo_count)
+{
+ int read;
+ int rc;
+ struct fsi_i2c_master *i2c = port->master;
+ int bytes_to_read;
+ int xfr_remaining = msg->len - port->xfrd;
+ u32 dummy;
+
+ bytes_to_read = min_t(int, fifo_count, xfr_remaining);
+
+ while (bytes_to_read) {
+ read = fsi_i2c_get_op_bytes(bytes_to_read);
+
+ if (xfr_remaining) {
+ rc = fsi_device_read(i2c->fsi, I2C_FSI_FIFO,
+ &msg->buf[port->xfrd], read);
+ if (rc)
+ return rc;
+
+ port->xfrd += read;
+ xfr_remaining -= read;
+ } else {
+ /* no more buffer but data in fifo, need to clear it */
+ rc = fsi_device_read(i2c->fsi, I2C_FSI_FIFO, &dummy,
+ read);
+ if (rc)
+ return rc;
+ }
+
+ bytes_to_read -= read;
+ }
+
+ return 0;
+}
+
+static int fsi_i2c_get_scl(struct i2c_adapter *adap)
+{
+ u32 stat = 0;
+ struct fsi_i2c_port *port = adap->algo_data;
+ struct fsi_i2c_master *i2c = port->master;
+
+ fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &stat);
+
+ return !!(stat & I2C_STAT_SCL_IN);
+}
+
+static void fsi_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+ u32 dummy = 0;
+ struct fsi_i2c_port *port = adap->algo_data;
+ struct fsi_i2c_master *i2c = port->master;
+
+ if (val)
+ fsi_i2c_write_reg(i2c->fsi, I2C_FSI_SET_SCL, &dummy);
+ else
+ fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_SCL, &dummy);
+}
+
+static int fsi_i2c_get_sda(struct i2c_adapter *adap)
+{
+ u32 stat = 0;
+ struct fsi_i2c_port *port = adap->algo_data;
+ struct fsi_i2c_master *i2c = port->master;
+
+ fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &stat);
+
+ return !!(stat & I2C_STAT_SDA_IN);
+}
+
+static void fsi_i2c_set_sda(struct i2c_adapter *adap, int val)
+{
+ u32 dummy = 0;
+ struct fsi_i2c_port *port = adap->algo_data;
+ struct fsi_i2c_master *i2c = port->master;
+
+ if (val)
+ fsi_i2c_write_reg(i2c->fsi, I2C_FSI_SET_SDA, &dummy);
+ else
+ fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_SDA, &dummy);
+}
+
+static void fsi_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+ int rc;
+ u32 mode;
+ struct fsi_i2c_port *port = adap->algo_data;
+ struct fsi_i2c_master *i2c = port->master;
+
+ rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+ if (rc)
+ return;
+
+ mode |= I2C_MODE_DIAG;
+ fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+}
+
+static void fsi_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+ int rc;
+ u32 mode;
+ struct fsi_i2c_port *port = adap->algo_data;
+ struct fsi_i2c_master *i2c = port->master;
+
+ rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+ if (rc)
+ return;
+
+ mode &= ~I2C_MODE_DIAG;
+ fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+}
+
+static int fsi_i2c_reset_bus(struct fsi_i2c_master *i2c,
+ struct fsi_i2c_port *port)
+{
+ int rc;
+ u32 stat, dummy = 0;
+
+ /* force bus reset, ignore errors */
+ i2c_recover_bus(&port->adapter);
+
+ /* reset errors */
+ rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_ERR, &dummy);
+ if (rc)
+ return rc;
+
+ /* wait for command complete */
+ usleep_range(I2C_RESET_SLEEP_MIN_US, I2C_RESET_SLEEP_MAX_US);
+
+ rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_STAT, &stat);
+ if (rc)
+ return rc;
+
+ if (stat & I2C_STAT_CMD_COMP)
+ return 0;
+
+ /* failed to get command complete; reset engine again */
+ rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_I2C, &dummy);
+ if (rc)
+ return rc;
+
+ /* re-init engine again */
+ return fsi_i2c_dev_init(i2c);
+}
+
+static int fsi_i2c_reset_engine(struct fsi_i2c_master *i2c, u16 port)
+{
+ int rc;
+ u32 mode, dummy = 0;
+
+ /* reset engine */
+ rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_I2C, &dummy);
+ if (rc)
+ return rc;
+
+ /* re-init engine */
+ rc = fsi_i2c_dev_init(i2c);
+ if (rc)
+ return rc;
+
+ rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+ if (rc)
+ return rc;
+
+ /* set port; default after reset is 0 */
+ if (port) {
+ mode &= ~I2C_MODE_PORT;
+ mode |= FIELD_PREP(I2C_MODE_PORT, port);
+ rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+ if (rc)
+ return rc;
+ }
+
+ /* reset busy register; hw workaround */
+ dummy = I2C_PORT_BUSY_RESET;
+ rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_PORT_BUSY, &dummy);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+static int fsi_i2c_abort(struct fsi_i2c_port *port, u32 status)
+{
+ int rc;
+ unsigned long start;
+ u32 cmd = I2C_CMD_WITH_STOP;
+ u32 stat;
+ struct fsi_i2c_master *i2c = port->master;
+ struct fsi_device *fsi = i2c->fsi;
+
+ rc = fsi_i2c_reset_engine(i2c, port->port);
+ if (rc)
+ return rc;
+
+ rc = fsi_i2c_read_reg(fsi, I2C_FSI_STAT, &stat);
+ if (rc)
+ return rc;
+
+ /* if sda is low, peform full bus reset */
+ if (!(stat & I2C_STAT_SDA_IN)) {
+ rc = fsi_i2c_reset_bus(i2c, port);
+ if (rc)
+ return rc;
+ }
+
+ /* skip final stop command for these errors */
+ if (status & (I2C_STAT_PARITY | I2C_STAT_LOST_ARB | I2C_STAT_STOP_ERR))
+ return 0;
+
+ /* write stop command */
+ rc = fsi_i2c_write_reg(fsi, I2C_FSI_CMD, &cmd);
+ if (rc)
+ return rc;
+
+ /* wait until we see command complete in the master */
+ start = jiffies;
+
+ do {
+ rc = fsi_i2c_read_reg(fsi, I2C_FSI_STAT, &status);
+ if (rc)
+ return rc;
+
+ if (status & I2C_STAT_CMD_COMP)
+ return 0;
+
+ usleep_range(I2C_CMD_SLEEP_MIN_US, I2C_CMD_SLEEP_MAX_US);
+ } while (time_after(start + I2C_ABORT_TIMEOUT, jiffies));
+
+ return -ETIMEDOUT;
+}
+
+static int fsi_i2c_handle_status(struct fsi_i2c_port *port,
+ struct i2c_msg *msg, u32 status)
+{
+ int rc;
+ u8 fifo_count;
+
+ if (status & I2C_STAT_ERR) {
+ rc = fsi_i2c_abort(port, status);
+ if (rc)
+ return rc;
+
+ if (status & I2C_STAT_INV_CMD)
+ return -EINVAL;
+
+ if (status & (I2C_STAT_PARITY | I2C_STAT_BE_OVERRUN |
+ I2C_STAT_BE_ACCESS))
+ return -EPROTO;
+
+ if (status & I2C_STAT_NACK)
+ return -ENXIO;
+
+ if (status & I2C_STAT_LOST_ARB)
+ return -EAGAIN;
+
+ if (status & I2C_STAT_STOP_ERR)
+ return -EBADMSG;
+
+ return -EIO;
+ }
+
+ if (status & I2C_STAT_DAT_REQ) {
+ fifo_count = FIELD_GET(I2C_STAT_FIFO_COUNT, status);
+
+ if (msg->flags & I2C_M_RD)
+ return fsi_i2c_read_fifo(port, msg, fifo_count);
+
+ return fsi_i2c_write_fifo(port, msg, fifo_count);
+ }
+
+ if (status & I2C_STAT_CMD_COMP) {
+ if (port->xfrd < msg->len)
+ return -ENODATA;
+
+ return msg->len;
+ }
+
+ return 0;
+}
+
+static int fsi_i2c_wait(struct fsi_i2c_port *port, struct i2c_msg *msg,
+ unsigned long timeout)
+{
+ u32 status = 0;
+ int rc;
+ unsigned long start = jiffies;
+
+ do {
+ rc = fsi_i2c_read_reg(port->master->fsi, I2C_FSI_STAT,
+ &status);
+ if (rc)
+ return rc;
+
+ if (status & I2C_STAT_ANY_RESP) {
+ rc = fsi_i2c_handle_status(port, msg, status);
+ if (rc < 0)
+ return rc;
+
+ /* cmd complete and all data xfrd */
+ if (rc == msg->len)
+ return 0;
+
+ /* need to xfr more data, but maybe don't need wait */
+ continue;
+ }
+
+ usleep_range(I2C_CMD_SLEEP_MIN_US, I2C_CMD_SLEEP_MAX_US);
+ } while (time_after(start + timeout, jiffies));
+
+ return -ETIMEDOUT;
+}
+
+static int fsi_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ int i, rc;
+ unsigned long start_time;
+ struct fsi_i2c_port *port = adap->algo_data;
+ struct fsi_i2c_master *master = port->master;
+ struct i2c_msg *msg;
+
+ mutex_lock(&master->lock);
+
+ rc = fsi_i2c_set_port(port);
+ if (rc)
+ goto unlock;
+
+ for (i = 0; i < num; i++) {
+ msg = msgs + i;
+ start_time = jiffies;
+
+ rc = fsi_i2c_start(port, msg, i == num - 1);
+ if (rc)
+ goto unlock;
+
+ rc = fsi_i2c_wait(port, msg,
+ adap->timeout - (jiffies - start_time));
+ if (rc)
+ goto unlock;
+ }
+
+unlock:
+ mutex_unlock(&master->lock);
+ return rc ? : num;
+}
+
+static u32 fsi_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_PROTOCOL_MANGLING |
+ I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static struct i2c_bus_recovery_info fsi_i2c_bus_recovery_info = {
+ .recover_bus = i2c_generic_scl_recovery,
+ .get_scl = fsi_i2c_get_scl,
+ .set_scl = fsi_i2c_set_scl,
+ .get_sda = fsi_i2c_get_sda,
+ .set_sda = fsi_i2c_set_sda,
+ .prepare_recovery = fsi_i2c_prepare_recovery,
+ .unprepare_recovery = fsi_i2c_unprepare_recovery,
+};
+
+static const struct i2c_algorithm fsi_i2c_algorithm = {
+ .master_xfer = fsi_i2c_xfer,
+ .functionality = fsi_i2c_functionality,
+};
+
+static int fsi_i2c_probe(struct device *dev)
+{
+ struct fsi_i2c_master *i2c;
+ struct fsi_i2c_port *port;
+ struct device_node *np;
+ int rc;
+ u32 port_no;
+
+ i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ mutex_init(&i2c->lock);
+ i2c->fsi = to_fsi_dev(dev);
+ INIT_LIST_HEAD(&i2c->ports);
+
+ rc = fsi_i2c_dev_init(i2c);
+ if (rc)
+ return rc;
+
+ /* Add adapter for each i2c port of the master. */
+ for_each_available_child_of_node(dev->of_node, np) {
+ rc = of_property_read_u32(np, "reg", &port_no);
+ if (rc || port_no > USHRT_MAX)
+ continue;
+
+ port = kzalloc(sizeof(*port), GFP_KERNEL);
+ if (!port)
+ break;
+
+ port->master = i2c;
+ port->port = port_no;
+
+ port->adapter.owner = THIS_MODULE;
+ port->adapter.dev.of_node = np;
+ port->adapter.dev.parent = dev;
+ port->adapter.algo = &fsi_i2c_algorithm;
+ port->adapter.bus_recovery_info = &fsi_i2c_bus_recovery_info;
+ port->adapter.algo_data = port;
+
+ snprintf(port->adapter.name, sizeof(port->adapter.name),
+ "i2c_bus-%u", port_no);
+
+ rc = i2c_add_adapter(&port->adapter);
+ if (rc < 0) {
+ dev_err(dev, "Failed to register adapter: %d\n", rc);
+ kfree(port);
+ continue;
+ }
+
+ list_add(&port->list, &i2c->ports);
+ }
+
+ dev_set_drvdata(dev, i2c);
+
+ return 0;
+}
+
+static int fsi_i2c_remove(struct device *dev)
+{
+ struct fsi_i2c_master *i2c = dev_get_drvdata(dev);
+ struct fsi_i2c_port *port, *tmp;
+
+ list_for_each_entry_safe(port, tmp, &i2c->ports, list) {
+ list_del(&port->list);
+ i2c_del_adapter(&port->adapter);
+ kfree(port);
+ }
+
+ return 0;
+}
+
+static const struct fsi_device_id fsi_i2c_ids[] = {
+ { FSI_ENGID_I2C, FSI_VERSION_ANY },
+ { }
+};
+
+static struct fsi_driver fsi_i2c_driver = {
+ .id_table = fsi_i2c_ids,
+ .drv = {
+ .name = "i2c-fsi",
+ .bus = &fsi_bus_type,
+ .probe = fsi_i2c_probe,
+ .remove = fsi_i2c_remove,
+ },
+};
+
+module_fsi_driver(fsi_i2c_driver);
+
+MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
+MODULE_DESCRIPTION("FSI attached I2C master");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 66f85bbf3591..c008d209f0b8 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -78,49 +78,43 @@ static struct dentry *i2c_gpio_debug_dir;
#define getscl(bd) ((bd)->getscl((bd)->data))
#define WIRE_ATTRIBUTE(wire) \
-static int fops_##wire##_get(void *data, u64 *val) \
-{ \
- struct i2c_gpio_private_data *priv = data; \
- \
- i2c_lock_adapter(&priv->adap); \
- *val = get##wire(&priv->bit_data); \
- i2c_unlock_adapter(&priv->adap); \
- return 0; \
-} \
-static int fops_##wire##_set(void *data, u64 val) \
-{ \
- struct i2c_gpio_private_data *priv = data; \
- \
- i2c_lock_adapter(&priv->adap); \
- set##wire(&priv->bit_data, val); \
- i2c_unlock_adapter(&priv->adap); \
- return 0; \
-} \
+static int fops_##wire##_get(void *data, u64 *val) \
+{ \
+ struct i2c_gpio_private_data *priv = data; \
+ \
+ i2c_lock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER); \
+ *val = get##wire(&priv->bit_data); \
+ i2c_unlock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER); \
+ return 0; \
+} \
+static int fops_##wire##_set(void *data, u64 val) \
+{ \
+ struct i2c_gpio_private_data *priv = data; \
+ \
+ i2c_lock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER); \
+ set##wire(&priv->bit_data, val); \
+ i2c_unlock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER); \
+ return 0; \
+} \
DEFINE_DEBUGFS_ATTRIBUTE(fops_##wire, fops_##wire##_get, fops_##wire##_set, "%llu\n")
WIRE_ATTRIBUTE(scl);
WIRE_ATTRIBUTE(sda);
-static int fops_incomplete_transfer_set(void *data, u64 addr)
+static void i2c_gpio_incomplete_transfer(struct i2c_gpio_private_data *priv,
+ u32 pattern, u8 pattern_size)
{
- struct i2c_gpio_private_data *priv = data;
struct i2c_algo_bit_data *bit_data = &priv->bit_data;
- int i, pattern;
+ int i;
- if (addr > 0x7f)
- return -EINVAL;
-
- /* ADDR (7 bit) + RD (1 bit) + SDA hi (1 bit) */
- pattern = (addr << 2) | 3;
-
- i2c_lock_adapter(&priv->adap);
+ i2c_lock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER);
/* START condition */
setsda(bit_data, 0);
udelay(bit_data->udelay);
- /* Send ADDR+RD, request ACK, don't send STOP */
- for (i = 8; i >= 0; i--) {
+ /* Send pattern, request ACK, don't send STOP */
+ for (i = pattern_size - 1; i >= 0; i--) {
setscl(bit_data, 0);
udelay(bit_data->udelay / 2);
setsda(bit_data, (pattern >> i) & 1);
@@ -129,11 +123,44 @@ static int fops_incomplete_transfer_set(void *data, u64 addr)
udelay(bit_data->udelay);
}
- i2c_unlock_adapter(&priv->adap);
+ i2c_unlock_bus(&priv->adap, I2C_LOCK_ROOT_ADAPTER);
+}
+
+static int fops_incomplete_addr_phase_set(void *data, u64 addr)
+{
+ struct i2c_gpio_private_data *priv = data;
+ u32 pattern;
+
+ if (addr > 0x7f)
+ return -EINVAL;
+
+ /* ADDR (7 bit) + RD (1 bit) + Client ACK, keep SDA hi (1 bit) */
+ pattern = (addr << 2) | 3;
+
+ i2c_gpio_incomplete_transfer(priv, pattern, 9);
+
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(fops_incomplete_addr_phase, NULL, fops_incomplete_addr_phase_set, "%llu\n");
+
+static int fops_incomplete_write_byte_set(void *data, u64 addr)
+{
+ struct i2c_gpio_private_data *priv = data;
+ u32 pattern;
+
+ if (addr > 0x7f)
+ return -EINVAL;
+
+ /* ADDR (7 bit) + WR (1 bit) + Client ACK (1 bit) */
+ pattern = (addr << 2) | 1;
+ /* 0x00 (8 bit) + Client ACK, keep SDA hi (1 bit) */
+ pattern = (pattern << 9) | 1;
+
+ i2c_gpio_incomplete_transfer(priv, pattern, 18);
return 0;
}
-DEFINE_DEBUGFS_ATTRIBUTE(fops_incomplete_transfer, NULL, fops_incomplete_transfer_set, "%llu\n");
+DEFINE_DEBUGFS_ATTRIBUTE(fops_incomplete_write_byte, NULL, fops_incomplete_write_byte_set, "%llu\n");
static void i2c_gpio_fault_injector_init(struct platform_device *pdev)
{
@@ -156,8 +183,10 @@ static void i2c_gpio_fault_injector_init(struct platform_device *pdev)
debugfs_create_file_unsafe("scl", 0600, priv->debug_dir, priv, &fops_scl);
debugfs_create_file_unsafe("sda", 0600, priv->debug_dir, priv, &fops_sda);
- debugfs_create_file_unsafe("incomplete_transfer", 0200, priv->debug_dir,
- priv, &fops_incomplete_transfer);
+ debugfs_create_file_unsafe("incomplete_address_phase", 0200, priv->debug_dir,
+ priv, &fops_incomplete_addr_phase);
+ debugfs_create_file_unsafe("incomplete_write_byte", 0200, priv->debug_dir,
+ priv, &fops_incomplete_write_byte);
}
static void i2c_gpio_fault_injector_exit(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index aa726607645e..941c223f6491 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -70,6 +70,7 @@
* Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes
* Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes
* Cedar Fork (PCH) 0x18df 32 hard yes yes yes
+ * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -220,6 +221,7 @@
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
#define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4
+#define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
@@ -1034,6 +1036,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) },
{ 0, }
};
@@ -1518,6 +1521,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
+ case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS:
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
priv->features |= FEATURE_SMBUS_PEC;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 498c5e891649..c406700789e1 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -421,10 +421,14 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
return -EAGAIN;
}
- if (for_busy && (temp & I2SR_IBB))
+ if (for_busy && (temp & I2SR_IBB)) {
+ i2c_imx->stopped = 0;
break;
- if (!for_busy && !(temp & I2SR_IBB))
+ }
+ if (!for_busy && !(temp & I2SR_IBB)) {
+ i2c_imx->stopped = 1;
break;
+ }
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> I2C bus is busy\n", __func__);
@@ -538,7 +542,6 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
result = i2c_imx_bus_busy(i2c_imx, 1);
if (result)
return result;
- i2c_imx->stopped = 0;
temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
temp &= ~I2CR_DMAEN;
@@ -567,10 +570,8 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
udelay(i2c_imx->disable_delay);
}
- if (!i2c_imx->stopped) {
+ if (!i2c_imx->stopped)
i2c_imx_bus_busy(i2c_imx, 0);
- i2c_imx->stopped = 1;
- }
/* Disable I2C controller */
temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
@@ -668,9 +669,6 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
struct imx_i2c_dma *dma = i2c_imx->dma;
struct device *dev = &i2c_imx->adapter.dev;
- temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
- temp |= I2CR_DMAEN;
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
dma->chan_using = dma->chan_rx;
dma->dma_transfer_dir = DMA_DEV_TO_MEM;
@@ -727,7 +725,6 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx,
temp &= ~(I2CR_MSTA | I2CR_MTX);
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
i2c_imx_bus_busy(i2c_imx, 0);
- i2c_imx->stopped = 1;
} else {
/*
* For i2c master receiver repeat restart operation like:
@@ -783,6 +780,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
int i, result;
unsigned int temp;
int block_data = msgs->flags & I2C_M_RECV_LEN;
+ int use_dma = i2c_imx->dma && msgs->len >= DMA_THRESHOLD && !block_data;
dev_dbg(&i2c_imx->adapter.dev,
"<%s> write slave address: addr=0x%x\n",
@@ -809,12 +807,14 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
*/
if ((msgs->len - 1) || block_data)
temp &= ~I2CR_TXAK;
+ if (use_dma)
+ temp |= I2CR_DMAEN;
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
- if (i2c_imx->dma && msgs->len >= DMA_THRESHOLD && !block_data)
+ if (use_dma)
return i2c_imx_dma_read(i2c_imx, msgs, is_lastmsg);
/* read data */
@@ -850,7 +850,6 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
temp &= ~(I2CR_MSTA | I2CR_MTX);
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
i2c_imx_bus_busy(i2c_imx, 0);
- i2c_imx->stopped = 1;
} else {
/*
* For i2c master receiver repeat restart operation like:
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 642c58946d8d..7d79317a1046 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -567,9 +567,6 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
msg->addr, msg->len, msg->flags, stop);
- if (msg->len == 0)
- return -EINVAL;
-
/*
* The MX28 I2C IP block can only do PIO READ for transfer of to up
* 4 bytes of length. The write transfer is not limited as it can use
@@ -683,6 +680,10 @@ static const struct i2c_algorithm mxs_i2c_algo = {
.functionality = mxs_i2c_func,
};
+static const struct i2c_adapter_quirks mxs_i2c_quirks = {
+ .flags = I2C_AQ_NO_ZERO_LEN,
+};
+
static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, uint32_t speed)
{
/* The I2C block clock runs at 24MHz */
@@ -854,6 +855,7 @@ static int mxs_i2c_probe(struct platform_device *pdev)
strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
adap->owner = THIS_MODULE;
adap->algo = &mxs_i2c_algo;
+ adap->quirks = &mxs_i2c_quirks;
adap->dev.parent = dev;
adap->nr = pdev->id;
adap->dev.of_node = pdev->dev.of_node;
diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c
new file mode 100644
index 000000000000..96b4572e6d9c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Actions Semiconductor Owl SoC's I2C driver
+ *
+ * Copyright (c) 2014 Actions Semi Inc.
+ * Author: David Liu <liuwei@actions-semi.com>
+ *
+ * Copyright (c) 2018 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+
+/* I2C registers */
+#define OWL_I2C_REG_CTL 0x0000
+#define OWL_I2C_REG_CLKDIV 0x0004
+#define OWL_I2C_REG_STAT 0x0008
+#define OWL_I2C_REG_ADDR 0x000C
+#define OWL_I2C_REG_TXDAT 0x0010
+#define OWL_I2C_REG_RXDAT 0x0014
+#define OWL_I2C_REG_CMD 0x0018
+#define OWL_I2C_REG_FIFOCTL 0x001C
+#define OWL_I2C_REG_FIFOSTAT 0x0020
+#define OWL_I2C_REG_DATCNT 0x0024
+#define OWL_I2C_REG_RCNT 0x0028
+
+/* I2Cx_CTL Bit Mask */
+#define OWL_I2C_CTL_RB BIT(1)
+#define OWL_I2C_CTL_GBCC(x) (((x) & 0x3) << 2)
+#define OWL_I2C_CTL_GBCC_NONE OWL_I2C_CTL_GBCC(0)
+#define OWL_I2C_CTL_GBCC_START OWL_I2C_CTL_GBCC(1)
+#define OWL_I2C_CTL_GBCC_STOP OWL_I2C_CTL_GBCC(2)
+#define OWL_I2C_CTL_GBCC_RSTART OWL_I2C_CTL_GBCC(3)
+#define OWL_I2C_CTL_IRQE BIT(5)
+#define OWL_I2C_CTL_EN BIT(7)
+#define OWL_I2C_CTL_AE BIT(8)
+#define OWL_I2C_CTL_SHSM BIT(10)
+
+#define OWL_I2C_DIV_FACTOR(x) ((x) & 0xff)
+
+/* I2Cx_STAT Bit Mask */
+#define OWL_I2C_STAT_RACK BIT(0)
+#define OWL_I2C_STAT_BEB BIT(1)
+#define OWL_I2C_STAT_IRQP BIT(2)
+#define OWL_I2C_STAT_LAB BIT(3)
+#define OWL_I2C_STAT_STPD BIT(4)
+#define OWL_I2C_STAT_STAD BIT(5)
+#define OWL_I2C_STAT_BBB BIT(6)
+#define OWL_I2C_STAT_TCB BIT(7)
+#define OWL_I2C_STAT_LBST BIT(8)
+#define OWL_I2C_STAT_SAMB BIT(9)
+#define OWL_I2C_STAT_SRGC BIT(10)
+
+/* I2Cx_CMD Bit Mask */
+#define OWL_I2C_CMD_SBE BIT(0)
+#define OWL_I2C_CMD_RBE BIT(4)
+#define OWL_I2C_CMD_DE BIT(8)
+#define OWL_I2C_CMD_NS BIT(9)
+#define OWL_I2C_CMD_SE BIT(10)
+#define OWL_I2C_CMD_MSS BIT(11)
+#define OWL_I2C_CMD_WRS BIT(12)
+#define OWL_I2C_CMD_SECL BIT(15)
+
+#define OWL_I2C_CMD_AS(x) (((x) & 0x7) << 1)
+#define OWL_I2C_CMD_SAS(x) (((x) & 0x7) << 5)
+
+/* I2Cx_FIFOCTL Bit Mask */
+#define OWL_I2C_FIFOCTL_NIB BIT(0)
+#define OWL_I2C_FIFOCTL_RFR BIT(1)
+#define OWL_I2C_FIFOCTL_TFR BIT(2)
+
+/* I2Cc_FIFOSTAT Bit Mask */
+#define OWL_I2C_FIFOSTAT_RNB BIT(1)
+#define OWL_I2C_FIFOSTAT_RFE BIT(2)
+#define OWL_I2C_FIFOSTAT_TFF BIT(5)
+#define OWL_I2C_FIFOSTAT_TFD GENMASK(23, 16)
+#define OWL_I2C_FIFOSTAT_RFD GENMASK(15, 8)
+
+/* I2C bus timeout */
+#define OWL_I2C_TIMEOUT msecs_to_jiffies(4 * 1000)
+
+#define OWL_I2C_MAX_RETRIES 50
+
+#define OWL_I2C_DEF_SPEED_HZ 100000
+#define OWL_I2C_MAX_SPEED_HZ 400000
+
+struct owl_i2c_dev {
+ struct i2c_adapter adap;
+ struct i2c_msg *msg;
+ struct completion msg_complete;
+ struct clk *clk;
+ spinlock_t lock;
+ void __iomem *base;
+ unsigned long clk_rate;
+ u32 bus_freq;
+ u32 msg_ptr;
+ int err;
+};
+
+static void owl_i2c_update_reg(void __iomem *reg, unsigned int val, bool state)
+{
+ unsigned int regval;
+
+ regval = readl(reg);
+
+ if (state)
+ regval |= val;
+ else
+ regval &= ~val;
+
+ writel(regval, reg);
+}
+
+static void owl_i2c_reset(struct owl_i2c_dev *i2c_dev)
+{
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
+ OWL_I2C_CTL_EN, false);
+ mdelay(1);
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
+ OWL_I2C_CTL_EN, true);
+
+ /* Clear status registers */
+ writel(0, i2c_dev->base + OWL_I2C_REG_STAT);
+}
+
+static int owl_i2c_reset_fifo(struct owl_i2c_dev *i2c_dev)
+{
+ unsigned int val, timeout = 0;
+
+ /* Reset FIFO */
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
+ OWL_I2C_FIFOCTL_RFR | OWL_I2C_FIFOCTL_TFR,
+ true);
+
+ /* Wait 50ms for FIFO reset complete */
+ do {
+ val = readl(i2c_dev->base + OWL_I2C_REG_FIFOCTL);
+ if (!(val & (OWL_I2C_FIFOCTL_RFR | OWL_I2C_FIFOCTL_TFR)))
+ break;
+ usleep_range(500, 1000);
+ } while (timeout++ < OWL_I2C_MAX_RETRIES);
+
+ if (timeout > OWL_I2C_MAX_RETRIES) {
+ dev_err(&i2c_dev->adap.dev, "FIFO reset timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void owl_i2c_set_freq(struct owl_i2c_dev *i2c_dev)
+{
+ unsigned int val;
+
+ val = DIV_ROUND_UP(i2c_dev->clk_rate, i2c_dev->bus_freq * 16);
+
+ /* Set clock divider factor */
+ writel(OWL_I2C_DIV_FACTOR(val), i2c_dev->base + OWL_I2C_REG_CLKDIV);
+}
+
+static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
+{
+ struct owl_i2c_dev *i2c_dev = _dev;
+ struct i2c_msg *msg = i2c_dev->msg;
+ unsigned long flags;
+ unsigned int stat, fifostat;
+
+ spin_lock_irqsave(&i2c_dev->lock, flags);
+
+ i2c_dev->err = 0;
+
+ /* Handle NACK from slave */
+ fifostat = readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT);
+ if (fifostat & OWL_I2C_FIFOSTAT_RNB) {
+ i2c_dev->err = -ENXIO;
+ goto stop;
+ }
+
+ /* Handle bus error */
+ stat = readl(i2c_dev->base + OWL_I2C_REG_STAT);
+ if (stat & OWL_I2C_STAT_BEB) {
+ i2c_dev->err = -EIO;
+ goto stop;
+ }
+
+ /* Handle FIFO read */
+ if (msg->flags & I2C_M_RD) {
+ while ((readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
+ OWL_I2C_FIFOSTAT_RFE) && i2c_dev->msg_ptr < msg->len) {
+ msg->buf[i2c_dev->msg_ptr++] = readl(i2c_dev->base +
+ OWL_I2C_REG_RXDAT);
+ }
+ } else {
+ /* Handle the remaining bytes which were not sent */
+ while (!(readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
+ OWL_I2C_FIFOSTAT_TFF) && i2c_dev->msg_ptr < msg->len) {
+ writel(msg->buf[i2c_dev->msg_ptr++],
+ i2c_dev->base + OWL_I2C_REG_TXDAT);
+ }
+ }
+
+stop:
+ /* Clear pending interrupts */
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_STAT,
+ OWL_I2C_STAT_IRQP, true);
+
+ complete_all(&i2c_dev->msg_complete);
+ spin_unlock_irqrestore(&i2c_dev->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static u32 owl_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static int owl_i2c_check_bus_busy(struct i2c_adapter *adap)
+{
+ struct owl_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+ unsigned long timeout;
+
+ /* Check for Bus busy */
+ timeout = jiffies + OWL_I2C_TIMEOUT;
+ while (readl(i2c_dev->base + OWL_I2C_REG_STAT) & OWL_I2C_STAT_BBB) {
+ if (time_after(jiffies, timeout)) {
+ dev_err(&adap->dev, "Bus busy timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ return 0;
+}
+
+static int owl_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ struct owl_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+ struct i2c_msg *msg;
+ unsigned long time_left, flags;
+ unsigned int i2c_cmd, val;
+ unsigned int addr;
+ int ret, idx;
+
+ spin_lock_irqsave(&i2c_dev->lock, flags);
+
+ /* Reset I2C controller */
+ owl_i2c_reset(i2c_dev);
+
+ /* Set bus frequency */
+ owl_i2c_set_freq(i2c_dev);
+
+ /*
+ * Spinlock should be released before calling reset FIFO and
+ * bus busy check since those functions may sleep
+ */
+ spin_unlock_irqrestore(&i2c_dev->lock, flags);
+
+ /* Reset FIFO */
+ ret = owl_i2c_reset_fifo(i2c_dev);
+ if (ret)
+ goto unlocked_err_exit;
+
+ /* Check for bus busy */
+ ret = owl_i2c_check_bus_busy(adap);
+ if (ret)
+ goto unlocked_err_exit;
+
+ spin_lock_irqsave(&i2c_dev->lock, flags);
+
+ /* Check for Arbitration lost */
+ val = readl(i2c_dev->base + OWL_I2C_REG_STAT);
+ if (val & OWL_I2C_STAT_LAB) {
+ val &= ~OWL_I2C_STAT_LAB;
+ writel(val, i2c_dev->base + OWL_I2C_REG_STAT);
+ ret = -EAGAIN;
+ goto err_exit;
+ }
+
+ reinit_completion(&i2c_dev->msg_complete);
+
+ /* Enable I2C controller interrupt */
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
+ OWL_I2C_CTL_IRQE, true);
+
+ /*
+ * Select: FIFO enable, Master mode, Stop enable, Data count enable,
+ * Send start bit
+ */
+ i2c_cmd = OWL_I2C_CMD_SECL | OWL_I2C_CMD_MSS | OWL_I2C_CMD_SE |
+ OWL_I2C_CMD_NS | OWL_I2C_CMD_DE | OWL_I2C_CMD_SBE;
+
+ /* Handle repeated start condition */
+ if (num > 1) {
+ /* Set internal address length and enable repeated start */
+ i2c_cmd |= OWL_I2C_CMD_AS(msgs[0].len + 1) |
+ OWL_I2C_CMD_SAS(1) | OWL_I2C_CMD_RBE;
+
+ /* Write slave address */
+ addr = i2c_8bit_addr_from_msg(&msgs[0]);
+ writel(addr, i2c_dev->base + OWL_I2C_REG_TXDAT);
+
+ /* Write internal register address */
+ for (idx = 0; idx < msgs[0].len; idx++)
+ writel(msgs[0].buf[idx],
+ i2c_dev->base + OWL_I2C_REG_TXDAT);
+
+ msg = &msgs[1];
+ } else {
+ /* Set address length */
+ i2c_cmd |= OWL_I2C_CMD_AS(1);
+ msg = &msgs[0];
+ }
+
+ i2c_dev->msg = msg;
+ i2c_dev->msg_ptr = 0;
+
+ /* Set data count for the message */
+ writel(msg->len, i2c_dev->base + OWL_I2C_REG_DATCNT);
+
+ addr = i2c_8bit_addr_from_msg(msg);
+ writel(addr, i2c_dev->base + OWL_I2C_REG_TXDAT);
+
+ if (!(msg->flags & I2C_M_RD)) {
+ /* Write data to FIFO */
+ for (idx = 0; idx < msg->len; idx++) {
+ /* Check for FIFO full */
+ if (readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT) &
+ OWL_I2C_FIFOSTAT_TFF)
+ break;
+
+ writel(msg->buf[idx],
+ i2c_dev->base + OWL_I2C_REG_TXDAT);
+ }
+
+ i2c_dev->msg_ptr = idx;
+ }
+
+ /* Ignore the NACK if needed */
+ if (msg->flags & I2C_M_IGNORE_NAK)
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
+ OWL_I2C_FIFOCTL_NIB, true);
+ else
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_FIFOCTL,
+ OWL_I2C_FIFOCTL_NIB, false);
+
+ /* Start the transfer */
+ writel(i2c_cmd, i2c_dev->base + OWL_I2C_REG_CMD);
+
+ spin_unlock_irqrestore(&i2c_dev->lock, flags);
+
+ time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
+ adap->timeout);
+
+ spin_lock_irqsave(&i2c_dev->lock, flags);
+ if (time_left == 0) {
+ dev_err(&adap->dev, "Transaction timed out\n");
+ /* Send stop condition and release the bus */
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
+ OWL_I2C_CTL_GBCC_STOP | OWL_I2C_CTL_RB,
+ true);
+ ret = -ETIMEDOUT;
+ goto err_exit;
+ }
+
+ ret = i2c_dev->err < 0 ? i2c_dev->err : num;
+
+err_exit:
+ spin_unlock_irqrestore(&i2c_dev->lock, flags);
+
+unlocked_err_exit:
+ /* Disable I2C controller */
+ owl_i2c_update_reg(i2c_dev->base + OWL_I2C_REG_CTL,
+ OWL_I2C_CTL_EN, false);
+
+ return ret;
+}
+
+static const struct i2c_algorithm owl_i2c_algorithm = {
+ .master_xfer = owl_i2c_master_xfer,
+ .functionality = owl_i2c_func,
+};
+
+static const struct i2c_adapter_quirks owl_i2c_quirks = {
+ .flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST,
+ .max_read_len = 240,
+ .max_write_len = 240,
+ .max_comb_1st_msg_len = 6,
+ .max_comb_2nd_msg_len = 240,
+};
+
+static int owl_i2c_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct owl_i2c_dev *i2c_dev;
+ struct resource *res;
+ int ret, irq;
+
+ i2c_dev = devm_kzalloc(dev, sizeof(*i2c_dev), GFP_KERNEL);
+ if (!i2c_dev)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i2c_dev->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(i2c_dev->base))
+ return PTR_ERR(i2c_dev->base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "failed to get IRQ number\n");
+ return irq;
+ }
+
+ if (of_property_read_u32(dev->of_node, "clock-frequency",
+ &i2c_dev->bus_freq))
+ i2c_dev->bus_freq = OWL_I2C_DEF_SPEED_HZ;
+
+ /* We support only frequencies of 100k and 400k for now */
+ if (i2c_dev->bus_freq != OWL_I2C_DEF_SPEED_HZ &&
+ i2c_dev->bus_freq != OWL_I2C_MAX_SPEED_HZ) {
+ dev_err(dev, "invalid clock-frequency %d\n", i2c_dev->bus_freq);
+ return -EINVAL;
+ }
+
+ i2c_dev->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(i2c_dev->clk)) {
+ dev_err(dev, "failed to get clock\n");
+ return PTR_ERR(i2c_dev->clk);
+ }
+
+ ret = clk_prepare_enable(i2c_dev->clk);
+ if (ret)
+ return ret;
+
+ i2c_dev->clk_rate = clk_get_rate(i2c_dev->clk);
+ if (!i2c_dev->clk_rate) {
+ dev_err(dev, "input clock rate should not be zero\n");
+ ret = -EINVAL;
+ goto disable_clk;
+ }
+
+ init_completion(&i2c_dev->msg_complete);
+ spin_lock_init(&i2c_dev->lock);
+ i2c_dev->adap.owner = THIS_MODULE;
+ i2c_dev->adap.algo = &owl_i2c_algorithm;
+ i2c_dev->adap.timeout = OWL_I2C_TIMEOUT;
+ i2c_dev->adap.quirks = &owl_i2c_quirks;
+ i2c_dev->adap.dev.parent = dev;
+ i2c_dev->adap.dev.of_node = dev->of_node;
+ snprintf(i2c_dev->adap.name, sizeof(i2c_dev->adap.name),
+ "%s", "OWL I2C adapter");
+ i2c_set_adapdata(&i2c_dev->adap, i2c_dev);
+
+ platform_set_drvdata(pdev, i2c_dev);
+
+ ret = devm_request_irq(dev, irq, owl_i2c_interrupt, 0, pdev->name,
+ i2c_dev);
+ if (ret) {
+ dev_err(dev, "failed to request irq %d\n", irq);
+ goto disable_clk;
+ }
+
+ return i2c_add_adapter(&i2c_dev->adap);
+
+disable_clk:
+ clk_disable_unprepare(i2c_dev->clk);
+
+ return ret;
+}
+
+static const struct of_device_id owl_i2c_of_match[] = {
+ { .compatible = "actions,s900-i2c" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, owl_i2c_of_match);
+
+static struct platform_driver owl_i2c_driver = {
+ .probe = owl_i2c_probe,
+ .driver = {
+ .name = "owl-i2c",
+ .of_match_table = of_match_ptr(owl_i2c_of_match),
+ },
+};
+module_platform_driver(owl_i2c_driver);
+
+MODULE_AUTHOR("David Liu <liuwei@actions-semi.com>");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_DESCRIPTION("Actions Semiconductor Owl SoC's I2C driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index 55fd5c6f3cca..50803e5d995b 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -365,7 +365,6 @@ static int pasemi_smb_probe(struct pci_dev *dev,
smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
smbus->adapter.algo = &smbus_algorithm;
smbus->adapter.algo_data = smbus;
- smbus->adapter.nr = PCI_FUNC(dev->devfn);
/* set up the sysfs linkage to our parent device */
smbus->adapter.dev.parent = &dev->dev;
@@ -373,7 +372,7 @@ static int pasemi_smb_probe(struct pci_dev *dev,
reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
(CLK_100K_DIV & CTL_CLK_M)));
- error = i2c_add_numbered_adapter(&smbus->adapter);
+ error = i2c_add_adapter(&smbus->adapter);
if (error)
goto out_release_region;
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index dae8ac618a52..0829cb696d9d 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -444,16 +444,6 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
{
enum pmcmsptwi_xfer_result retval;
- if ((cmd->type == MSP_TWI_CMD_WRITE && cmd->write_len == 0) ||
- (cmd->type == MSP_TWI_CMD_READ && cmd->read_len == 0) ||
- (cmd->type == MSP_TWI_CMD_WRITE_READ &&
- (cmd->read_len == 0 || cmd->write_len == 0))) {
- dev_err(&pmcmsptwi_adapter.dev,
- "%s: Cannot transfer less than 1 byte\n",
- __func__);
- return -EINVAL;
- }
-
mutex_lock(&data->lock);
dev_dbg(&pmcmsptwi_adapter.dev,
"Setting address to 0x%04x\n", cmd->addr);
@@ -532,11 +522,6 @@ static int pmcmsptwi_master_xfer(struct i2c_adapter *adap,
cmd.write_data = msg->buf;
}
- if (msg->len == 0) {
- dev_err(&adap->dev, "Zero-byte messages unsupported\n");
- return -EINVAL;
- }
-
cmd.addr = msg->addr;
if (msg->flags & I2C_M_TEN) {
@@ -578,7 +563,7 @@ static u32 pmcmsptwi_i2c_func(struct i2c_adapter *adapter)
}
static const struct i2c_adapter_quirks pmcmsptwi_i2c_quirks = {
- .flags = I2C_AQ_COMB_WRITE_THEN_READ,
+ .flags = I2C_AQ_COMB_WRITE_THEN_READ | I2C_AQ_NO_ZERO_LEN,
.max_write_len = MSP_MAX_BYTES_PER_RW,
.max_read_len = MSP_MAX_BYTES_PER_RW,
.max_comb_1st_msg_len = MSP_MAX_BYTES_PER_RW,
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
new file mode 100644
index 000000000000..36732eb688a4
--- /dev/null
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/qcom-geni-se.h>
+#include <linux/spinlock.h>
+
+#define SE_I2C_TX_TRANS_LEN 0x26c
+#define SE_I2C_RX_TRANS_LEN 0x270
+#define SE_I2C_SCL_COUNTERS 0x278
+
+#define SE_I2C_ERR (M_CMD_OVERRUN_EN | M_ILLEGAL_CMD_EN | M_CMD_FAILURE_EN |\
+ M_GP_IRQ_1_EN | M_GP_IRQ_3_EN | M_GP_IRQ_4_EN)
+#define SE_I2C_ABORT BIT(1)
+
+/* M_CMD OP codes for I2C */
+#define I2C_WRITE 0x1
+#define I2C_READ 0x2
+#define I2C_WRITE_READ 0x3
+#define I2C_ADDR_ONLY 0x4
+#define I2C_BUS_CLEAR 0x6
+#define I2C_STOP_ON_BUS 0x7
+/* M_CMD params for I2C */
+#define PRE_CMD_DELAY BIT(0)
+#define TIMESTAMP_BEFORE BIT(1)
+#define STOP_STRETCH BIT(2)
+#define TIMESTAMP_AFTER BIT(3)
+#define POST_COMMAND_DELAY BIT(4)
+#define IGNORE_ADD_NACK BIT(6)
+#define READ_FINISHED_WITH_ACK BIT(7)
+#define BYPASS_ADDR_PHASE BIT(8)
+#define SLV_ADDR_MSK GENMASK(15, 9)
+#define SLV_ADDR_SHFT 9
+/* I2C SCL COUNTER fields */
+#define HIGH_COUNTER_MSK GENMASK(29, 20)
+#define HIGH_COUNTER_SHFT 20
+#define LOW_COUNTER_MSK GENMASK(19, 10)
+#define LOW_COUNTER_SHFT 10
+#define CYCLE_COUNTER_MSK GENMASK(9, 0)
+
+enum geni_i2c_err_code {
+ GP_IRQ0,
+ NACK,
+ GP_IRQ2,
+ BUS_PROTO,
+ ARB_LOST,
+ GP_IRQ5,
+ GENI_OVERRUN,
+ GENI_ILLEGAL_CMD,
+ GENI_ABORT_DONE,
+ GENI_TIMEOUT,
+};
+
+#define DM_I2C_CB_ERR ((BIT(NACK) | BIT(BUS_PROTO) | BIT(ARB_LOST)) \
+ << 5)
+
+#define I2C_AUTO_SUSPEND_DELAY 250
+#define KHZ(freq) (1000 * freq)
+#define PACKING_BYTES_PW 4
+
+#define ABORT_TIMEOUT HZ
+#define XFER_TIMEOUT HZ
+#define RST_TIMEOUT HZ
+
+struct geni_i2c_dev {
+ struct geni_se se;
+ u32 tx_wm;
+ int irq;
+ int err;
+ struct i2c_adapter adap;
+ struct completion done;
+ struct i2c_msg *cur;
+ int cur_wr;
+ int cur_rd;
+ spinlock_t lock;
+ u32 clk_freq_out;
+ const struct geni_i2c_clk_fld *clk_fld;
+ int suspended;
+};
+
+struct geni_i2c_err_log {
+ int err;
+ const char *msg;
+};
+
+static const struct geni_i2c_err_log gi2c_log[] = {
+ [GP_IRQ0] = {-EIO, "Unknown I2C err GP_IRQ0"},
+ [NACK] = {-ENXIO, "NACK: slv unresponsive, check its power/reset-ln"},
+ [GP_IRQ2] = {-EIO, "Unknown I2C err GP IRQ2"},
+ [BUS_PROTO] = {-EPROTO, "Bus proto err, noisy/unepxected start/stop"},
+ [ARB_LOST] = {-EAGAIN, "Bus arbitration lost, clock line undriveable"},
+ [GP_IRQ5] = {-EIO, "Unknown I2C err GP IRQ5"},
+ [GENI_OVERRUN] = {-EIO, "Cmd overrun, check GENI cmd-state machine"},
+ [GENI_ILLEGAL_CMD] = {-EIO, "Illegal cmd, check GENI cmd-state machine"},
+ [GENI_ABORT_DONE] = {-ETIMEDOUT, "Abort after timeout successful"},
+ [GENI_TIMEOUT] = {-ETIMEDOUT, "I2C TXN timed out"},
+};
+
+struct geni_i2c_clk_fld {
+ u32 clk_freq_out;
+ u8 clk_div;
+ u8 t_high_cnt;
+ u8 t_low_cnt;
+ u8 t_cycle_cnt;
+};
+
+/*
+ * Hardware uses the underlying formula to calculate time periods of
+ * SCL clock cycle. Firmware uses some additional cycles excluded from the
+ * below formula and it is confirmed that the time periods are within
+ * specification limits.
+ *
+ * time of high period of SCL: t_high = (t_high_cnt * clk_div) / source_clock
+ * time of low period of SCL: t_low = (t_low_cnt * clk_div) / source_clock
+ * time of full period of SCL: t_cycle = (t_cycle_cnt * clk_div) / source_clock
+ * clk_freq_out = t / t_cycle
+ * source_clock = 19.2 MHz
+ */
+static const struct geni_i2c_clk_fld geni_i2c_clk_map[] = {
+ {KHZ(100), 7, 10, 11, 26},
+ {KHZ(400), 2, 5, 12, 24},
+ {KHZ(1000), 1, 3, 9, 18},
+};
+
+static int geni_i2c_clk_map_idx(struct geni_i2c_dev *gi2c)
+{
+ int i;
+ const struct geni_i2c_clk_fld *itr = geni_i2c_clk_map;
+
+ for (i = 0; i < ARRAY_SIZE(geni_i2c_clk_map); i++, itr++) {
+ if (itr->clk_freq_out == gi2c->clk_freq_out) {
+ gi2c->clk_fld = itr;
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static void qcom_geni_i2c_conf(struct geni_i2c_dev *gi2c)
+{
+ const struct geni_i2c_clk_fld *itr = gi2c->clk_fld;
+ u32 val;
+
+ writel_relaxed(0, gi2c->se.base + SE_GENI_CLK_SEL);
+
+ val = (itr->clk_div << CLK_DIV_SHFT) | SER_CLK_EN;
+ writel_relaxed(val, gi2c->se.base + GENI_SER_M_CLK_CFG);
+
+ val = itr->t_high_cnt << HIGH_COUNTER_SHFT;
+ val |= itr->t_low_cnt << LOW_COUNTER_SHFT;
+ val |= itr->t_cycle_cnt;
+ writel_relaxed(val, gi2c->se.base + SE_I2C_SCL_COUNTERS);
+}
+
+static void geni_i2c_err_misc(struct geni_i2c_dev *gi2c)
+{
+ u32 m_cmd = readl_relaxed(gi2c->se.base + SE_GENI_M_CMD0);
+ u32 m_stat = readl_relaxed(gi2c->se.base + SE_GENI_M_IRQ_STATUS);
+ u32 geni_s = readl_relaxed(gi2c->se.base + SE_GENI_STATUS);
+ u32 geni_ios = readl_relaxed(gi2c->se.base + SE_GENI_IOS);
+ u32 dma = readl_relaxed(gi2c->se.base + SE_GENI_DMA_MODE_EN);
+ u32 rx_st, tx_st;
+
+ if (dma) {
+ rx_st = readl_relaxed(gi2c->se.base + SE_DMA_RX_IRQ_STAT);
+ tx_st = readl_relaxed(gi2c->se.base + SE_DMA_TX_IRQ_STAT);
+ } else {
+ rx_st = readl_relaxed(gi2c->se.base + SE_GENI_RX_FIFO_STATUS);
+ tx_st = readl_relaxed(gi2c->se.base + SE_GENI_TX_FIFO_STATUS);
+ }
+ dev_dbg(gi2c->se.dev, "DMA:%d tx_stat:0x%x, rx_stat:0x%x, irq-stat:0x%x\n",
+ dma, tx_st, rx_st, m_stat);
+ dev_dbg(gi2c->se.dev, "m_cmd:0x%x, geni_status:0x%x, geni_ios:0x%x\n",
+ m_cmd, geni_s, geni_ios);
+}
+
+static void geni_i2c_err(struct geni_i2c_dev *gi2c, int err)
+{
+ if (!gi2c->err)
+ gi2c->err = gi2c_log[err].err;
+ if (gi2c->cur)
+ dev_dbg(gi2c->se.dev, "len:%d, slv-addr:0x%x, RD/WR:%d\n",
+ gi2c->cur->len, gi2c->cur->addr, gi2c->cur->flags);
+
+ if (err != NACK && err != GENI_ABORT_DONE) {
+ dev_err(gi2c->se.dev, "%s\n", gi2c_log[err].msg);
+ geni_i2c_err_misc(gi2c);
+ }
+}
+
+static irqreturn_t geni_i2c_irq(int irq, void *dev)
+{
+ struct geni_i2c_dev *gi2c = dev;
+ int j;
+ u32 m_stat;
+ u32 rx_st;
+ u32 dm_tx_st;
+ u32 dm_rx_st;
+ u32 dma;
+ struct i2c_msg *cur;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gi2c->lock, flags);
+ m_stat = readl_relaxed(gi2c->se.base + SE_GENI_M_IRQ_STATUS);
+ rx_st = readl_relaxed(gi2c->se.base + SE_GENI_RX_FIFO_STATUS);
+ dm_tx_st = readl_relaxed(gi2c->se.base + SE_DMA_TX_IRQ_STAT);
+ dm_rx_st = readl_relaxed(gi2c->se.base + SE_DMA_RX_IRQ_STAT);
+ dma = readl_relaxed(gi2c->se.base + SE_GENI_DMA_MODE_EN);
+ cur = gi2c->cur;
+
+ if (!cur ||
+ m_stat & (M_CMD_FAILURE_EN | M_CMD_ABORT_EN) ||
+ dm_rx_st & (DM_I2C_CB_ERR)) {
+ if (m_stat & M_GP_IRQ_1_EN)
+ geni_i2c_err(gi2c, NACK);
+ if (m_stat & M_GP_IRQ_3_EN)
+ geni_i2c_err(gi2c, BUS_PROTO);
+ if (m_stat & M_GP_IRQ_4_EN)
+ geni_i2c_err(gi2c, ARB_LOST);
+ if (m_stat & M_CMD_OVERRUN_EN)
+ geni_i2c_err(gi2c, GENI_OVERRUN);
+ if (m_stat & M_ILLEGAL_CMD_EN)
+ geni_i2c_err(gi2c, GENI_ILLEGAL_CMD);
+ if (m_stat & M_CMD_ABORT_EN)
+ geni_i2c_err(gi2c, GENI_ABORT_DONE);
+ if (m_stat & M_GP_IRQ_0_EN)
+ geni_i2c_err(gi2c, GP_IRQ0);
+
+ /* Disable the TX Watermark interrupt to stop TX */
+ if (!dma)
+ writel_relaxed(0, gi2c->se.base +
+ SE_GENI_TX_WATERMARK_REG);
+ goto irqret;
+ }
+
+ if (dma) {
+ dev_dbg(gi2c->se.dev, "i2c dma tx:0x%x, dma rx:0x%x\n",
+ dm_tx_st, dm_rx_st);
+ goto irqret;
+ }
+
+ if (cur->flags & I2C_M_RD &&
+ m_stat & (M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN)) {
+ u32 rxcnt = rx_st & RX_FIFO_WC_MSK;
+
+ for (j = 0; j < rxcnt; j++) {
+ u32 val;
+ int p = 0;
+
+ val = readl_relaxed(gi2c->se.base + SE_GENI_RX_FIFOn);
+ while (gi2c->cur_rd < cur->len && p < sizeof(val)) {
+ cur->buf[gi2c->cur_rd++] = val & 0xff;
+ val >>= 8;
+ p++;
+ }
+ if (gi2c->cur_rd == cur->len)
+ break;
+ }
+ } else if (!(cur->flags & I2C_M_RD) &&
+ m_stat & M_TX_FIFO_WATERMARK_EN) {
+ for (j = 0; j < gi2c->tx_wm; j++) {
+ u32 temp;
+ u32 val = 0;
+ int p = 0;
+
+ while (gi2c->cur_wr < cur->len && p < sizeof(val)) {
+ temp = cur->buf[gi2c->cur_wr++];
+ val |= temp << (p * 8);
+ p++;
+ }
+ writel_relaxed(val, gi2c->se.base + SE_GENI_TX_FIFOn);
+ /* TX Complete, Disable the TX Watermark interrupt */
+ if (gi2c->cur_wr == cur->len) {
+ writel_relaxed(0, gi2c->se.base +
+ SE_GENI_TX_WATERMARK_REG);
+ break;
+ }
+ }
+ }
+irqret:
+ if (m_stat)
+ writel_relaxed(m_stat, gi2c->se.base + SE_GENI_M_IRQ_CLEAR);
+
+ if (dma) {
+ if (dm_tx_st)
+ writel_relaxed(dm_tx_st, gi2c->se.base +
+ SE_DMA_TX_IRQ_CLR);
+ if (dm_rx_st)
+ writel_relaxed(dm_rx_st, gi2c->se.base +
+ SE_DMA_RX_IRQ_CLR);
+ }
+ /* if this is err with done-bit not set, handle that through timeout. */
+ if (m_stat & M_CMD_DONE_EN || m_stat & M_CMD_ABORT_EN)
+ complete(&gi2c->done);
+ else if (dm_tx_st & TX_DMA_DONE || dm_tx_st & TX_RESET_DONE)
+ complete(&gi2c->done);
+ else if (dm_rx_st & RX_DMA_DONE || dm_rx_st & RX_RESET_DONE)
+ complete(&gi2c->done);
+
+ spin_unlock_irqrestore(&gi2c->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static void geni_i2c_abort_xfer(struct geni_i2c_dev *gi2c)
+{
+ u32 val;
+ unsigned long time_left = ABORT_TIMEOUT;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gi2c->lock, flags);
+ geni_i2c_err(gi2c, GENI_TIMEOUT);
+ gi2c->cur = NULL;
+ geni_se_abort_m_cmd(&gi2c->se);
+ spin_unlock_irqrestore(&gi2c->lock, flags);
+ do {
+ time_left = wait_for_completion_timeout(&gi2c->done, time_left);
+ val = readl_relaxed(gi2c->se.base + SE_GENI_M_IRQ_STATUS);
+ } while (!(val & M_CMD_ABORT_EN) && time_left);
+
+ if (!(val & M_CMD_ABORT_EN))
+ dev_err(gi2c->se.dev, "Timeout abort_m_cmd\n");
+}
+
+static void geni_i2c_rx_fsm_rst(struct geni_i2c_dev *gi2c)
+{
+ u32 val;
+ unsigned long time_left = RST_TIMEOUT;
+
+ writel_relaxed(1, gi2c->se.base + SE_DMA_RX_FSM_RST);
+ do {
+ time_left = wait_for_completion_timeout(&gi2c->done, time_left);
+ val = readl_relaxed(gi2c->se.base + SE_DMA_RX_IRQ_STAT);
+ } while (!(val & RX_RESET_DONE) && time_left);
+
+ if (!(val & RX_RESET_DONE))
+ dev_err(gi2c->se.dev, "Timeout resetting RX_FSM\n");
+}
+
+static void geni_i2c_tx_fsm_rst(struct geni_i2c_dev *gi2c)
+{
+ u32 val;
+ unsigned long time_left = RST_TIMEOUT;
+
+ writel_relaxed(1, gi2c->se.base + SE_DMA_TX_FSM_RST);
+ do {
+ time_left = wait_for_completion_timeout(&gi2c->done, time_left);
+ val = readl_relaxed(gi2c->se.base + SE_DMA_TX_IRQ_STAT);
+ } while (!(val & TX_RESET_DONE) && time_left);
+
+ if (!(val & TX_RESET_DONE))
+ dev_err(gi2c->se.dev, "Timeout resetting TX_FSM\n");
+}
+
+static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
+ u32 m_param)
+{
+ dma_addr_t rx_dma;
+ enum geni_se_xfer_mode mode;
+ unsigned long time_left = XFER_TIMEOUT;
+
+ gi2c->cur = msg;
+ mode = msg->len > 32 ? GENI_SE_DMA : GENI_SE_FIFO;
+ geni_se_select_mode(&gi2c->se, mode);
+ writel_relaxed(msg->len, gi2c->se.base + SE_I2C_RX_TRANS_LEN);
+ geni_se_setup_m_cmd(&gi2c->se, I2C_READ, m_param);
+ if (mode == GENI_SE_DMA) {
+ int ret;
+
+ ret = geni_se_rx_dma_prep(&gi2c->se, msg->buf, msg->len,
+ &rx_dma);
+ if (ret) {
+ mode = GENI_SE_FIFO;
+ geni_se_select_mode(&gi2c->se, mode);
+ }
+ }
+
+ time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
+ if (!time_left)
+ geni_i2c_abort_xfer(gi2c);
+
+ gi2c->cur_rd = 0;
+ if (mode == GENI_SE_DMA) {
+ if (gi2c->err)
+ geni_i2c_rx_fsm_rst(gi2c);
+ geni_se_rx_dma_unprep(&gi2c->se, rx_dma, msg->len);
+ }
+ return gi2c->err;
+}
+
+static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
+ u32 m_param)
+{
+ dma_addr_t tx_dma;
+ enum geni_se_xfer_mode mode;
+ unsigned long time_left;
+
+ gi2c->cur = msg;
+ mode = msg->len > 32 ? GENI_SE_DMA : GENI_SE_FIFO;
+ geni_se_select_mode(&gi2c->se, mode);
+ writel_relaxed(msg->len, gi2c->se.base + SE_I2C_TX_TRANS_LEN);
+ geni_se_setup_m_cmd(&gi2c->se, I2C_WRITE, m_param);
+ if (mode == GENI_SE_DMA) {
+ int ret;
+
+ ret = geni_se_tx_dma_prep(&gi2c->se, msg->buf, msg->len,
+ &tx_dma);
+ if (ret) {
+ mode = GENI_SE_FIFO;
+ geni_se_select_mode(&gi2c->se, mode);
+ }
+ }
+
+ if (mode == GENI_SE_FIFO) /* Get FIFO IRQ */
+ writel_relaxed(1, gi2c->se.base + SE_GENI_TX_WATERMARK_REG);
+
+ time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
+ if (!time_left)
+ geni_i2c_abort_xfer(gi2c);
+
+ gi2c->cur_wr = 0;
+ if (mode == GENI_SE_DMA) {
+ if (gi2c->err)
+ geni_i2c_tx_fsm_rst(gi2c);
+ geni_se_tx_dma_unprep(&gi2c->se, tx_dma, msg->len);
+ }
+ return gi2c->err;
+}
+
+static int geni_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msgs[],
+ int num)
+{
+ struct geni_i2c_dev *gi2c = i2c_get_adapdata(adap);
+ int i, ret;
+
+ gi2c->err = 0;
+ reinit_completion(&gi2c->done);
+ ret = pm_runtime_get_sync(gi2c->se.dev);
+ if (ret < 0) {
+ dev_err(gi2c->se.dev, "error turning SE resources:%d\n", ret);
+ pm_runtime_put_noidle(gi2c->se.dev);
+ /* Set device in suspended since resume failed */
+ pm_runtime_set_suspended(gi2c->se.dev);
+ return ret;
+ }
+
+ qcom_geni_i2c_conf(gi2c);
+ for (i = 0; i < num; i++) {
+ u32 m_param = i < (num - 1) ? STOP_STRETCH : 0;
+
+ m_param |= ((msgs[i].addr << SLV_ADDR_SHFT) & SLV_ADDR_MSK);
+
+ if (msgs[i].flags & I2C_M_RD)
+ ret = geni_i2c_rx_one_msg(gi2c, &msgs[i], m_param);
+ else
+ ret = geni_i2c_tx_one_msg(gi2c, &msgs[i], m_param);
+
+ if (ret)
+ break;
+ }
+ if (ret == 0)
+ ret = num;
+
+ pm_runtime_mark_last_busy(gi2c->se.dev);
+ pm_runtime_put_autosuspend(gi2c->se.dev);
+ gi2c->cur = NULL;
+ gi2c->err = 0;
+ return ret;
+}
+
+static u32 geni_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm geni_i2c_algo = {
+ .master_xfer = geni_i2c_xfer,
+ .functionality = geni_i2c_func,
+};
+
+static int geni_i2c_probe(struct platform_device *pdev)
+{
+ struct geni_i2c_dev *gi2c;
+ struct resource *res;
+ u32 proto, tx_depth;
+ int ret;
+
+ gi2c = devm_kzalloc(&pdev->dev, sizeof(*gi2c), GFP_KERNEL);
+ if (!gi2c)
+ return -ENOMEM;
+
+ gi2c->se.dev = &pdev->dev;
+ gi2c->se.wrapper = dev_get_drvdata(pdev->dev.parent);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ gi2c->se.base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gi2c->se.base))
+ return PTR_ERR(gi2c->se.base);
+
+ gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
+ if (IS_ERR(gi2c->se.clk)) {
+ ret = PTR_ERR(gi2c->se.clk);
+ dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
+ return ret;
+ }
+
+ ret = device_property_read_u32(&pdev->dev, "clock-frequency",
+ &gi2c->clk_freq_out);
+ if (ret) {
+ dev_info(&pdev->dev,
+ "Bus frequency not specified, default to 100kHz.\n");
+ gi2c->clk_freq_out = KHZ(100);
+ }
+
+ gi2c->irq = platform_get_irq(pdev, 0);
+ if (gi2c->irq < 0) {
+ dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
+ return gi2c->irq;
+ }
+
+ ret = geni_i2c_clk_map_idx(gi2c);
+ if (ret) {
+ dev_err(&pdev->dev, "Invalid clk frequency %d Hz: %d\n",
+ gi2c->clk_freq_out, ret);
+ return ret;
+ }
+
+ gi2c->adap.algo = &geni_i2c_algo;
+ init_completion(&gi2c->done);
+ spin_lock_init(&gi2c->lock);
+ platform_set_drvdata(pdev, gi2c);
+ ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq,
+ IRQF_TRIGGER_HIGH, "i2c_geni", gi2c);
+ if (ret) {
+ dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n",
+ gi2c->irq, ret);
+ return ret;
+ }
+ /* Disable the interrupt so that the system can enter low-power mode */
+ disable_irq(gi2c->irq);
+ i2c_set_adapdata(&gi2c->adap, gi2c);
+ gi2c->adap.dev.parent = &pdev->dev;
+ gi2c->adap.dev.of_node = pdev->dev.of_node;
+ strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
+
+ ret = geni_se_resources_on(&gi2c->se);
+ if (ret) {
+ dev_err(&pdev->dev, "Error turning on resources %d\n", ret);
+ return ret;
+ }
+ proto = geni_se_read_proto(&gi2c->se);
+ tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se);
+ if (proto != GENI_SE_I2C) {
+ dev_err(&pdev->dev, "Invalid proto %d\n", proto);
+ geni_se_resources_off(&gi2c->se);
+ return -ENXIO;
+ }
+ gi2c->tx_wm = tx_depth - 1;
+ geni_se_init(&gi2c->se, gi2c->tx_wm, tx_depth);
+ geni_se_config_packing(&gi2c->se, BITS_PER_BYTE, PACKING_BYTES_PW,
+ true, true, true);
+ ret = geni_se_resources_off(&gi2c->se);
+ if (ret) {
+ dev_err(&pdev->dev, "Error turning off resources %d\n", ret);
+ return ret;
+ }
+
+ dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
+
+ ret = i2c_add_adapter(&gi2c->adap);
+ if (ret) {
+ dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
+ return ret;
+ }
+
+ gi2c->suspended = 1;
+ pm_runtime_set_suspended(gi2c->se.dev);
+ pm_runtime_set_autosuspend_delay(gi2c->se.dev, I2C_AUTO_SUSPEND_DELAY);
+ pm_runtime_use_autosuspend(gi2c->se.dev);
+ pm_runtime_enable(gi2c->se.dev);
+
+ return 0;
+}
+
+static int geni_i2c_remove(struct platform_device *pdev)
+{
+ struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
+
+ pm_runtime_disable(gi2c->se.dev);
+ i2c_del_adapter(&gi2c->adap);
+ return 0;
+}
+
+static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
+{
+ int ret;
+ struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+
+ disable_irq(gi2c->irq);
+ ret = geni_se_resources_off(&gi2c->se);
+ if (ret) {
+ enable_irq(gi2c->irq);
+ return ret;
+
+ } else {
+ gi2c->suspended = 1;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
+{
+ int ret;
+ struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+
+ ret = geni_se_resources_on(&gi2c->se);
+ if (ret)
+ return ret;
+
+ enable_irq(gi2c->irq);
+ gi2c->suspended = 0;
+ return 0;
+}
+
+static int __maybe_unused geni_i2c_suspend_noirq(struct device *dev)
+{
+ struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+
+ if (!gi2c->suspended) {
+ geni_i2c_runtime_suspend(dev);
+ pm_runtime_disable(dev);
+ pm_runtime_set_suspended(dev);
+ pm_runtime_enable(dev);
+ }
+ return 0;
+}
+
+static const struct dev_pm_ops geni_i2c_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(geni_i2c_suspend_noirq, NULL)
+ SET_RUNTIME_PM_OPS(geni_i2c_runtime_suspend, geni_i2c_runtime_resume,
+ NULL)
+};
+
+static const struct of_device_id geni_i2c_dt_match[] = {
+ { .compatible = "qcom,geni-i2c" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, geni_i2c_dt_match);
+
+static struct platform_driver geni_i2c_driver = {
+ .probe = geni_i2c_probe,
+ .remove = geni_i2c_remove,
+ .driver = {
+ .name = "geni_i2c",
+ .pm = &geni_i2c_pm_ops,
+ .of_match_table = geni_i2c_dt_match,
+ },
+};
+
+module_platform_driver(geni_i2c_driver);
+
+MODULE_DESCRIPTION("I2C Controller Driver for GENI based QUP cores");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 3c1c817f6968..43ad933df0f0 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -19,6 +19,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
+#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
@@ -112,9 +113,10 @@
#define ID_ARBLOST (1 << 3)
#define ID_NACK (1 << 4)
/* persistent flags */
-#define ID_P_NO_RXDMA (1 << 30) /* HW forbids RXDMA sometimes */
-#define ID_P_PM_BLOCKED (1 << 31)
-#define ID_P_MASK (ID_P_PM_BLOCKED | ID_P_NO_RXDMA)
+#define ID_P_REP_AFTER_RD BIT(29)
+#define ID_P_NO_RXDMA BIT(30) /* HW forbids RXDMA sometimes */
+#define ID_P_PM_BLOCKED BIT(31)
+#define ID_P_MASK GENMASK(31, 29)
enum rcar_i2c_type {
I2C_RCAR_GEN1,
@@ -183,8 +185,6 @@ static void rcar_i2c_set_scl(struct i2c_adapter *adap, int val)
rcar_i2c_write(priv, ICMCR, priv->recovery_icmcr);
};
-/* No get_sda, because the HW only reports its bus free logic, not SDA itself */
-
static void rcar_i2c_set_sda(struct i2c_adapter *adap, int val)
{
struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
@@ -197,10 +197,19 @@ static void rcar_i2c_set_sda(struct i2c_adapter *adap, int val)
rcar_i2c_write(priv, ICMCR, priv->recovery_icmcr);
};
+static int rcar_i2c_get_bus_free(struct i2c_adapter *adap)
+{
+ struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
+
+ return !(rcar_i2c_read(priv, ICMCR) & FSDA);
+
+};
+
static struct i2c_bus_recovery_info rcar_i2c_bri = {
.get_scl = rcar_i2c_get_scl,
.set_scl = rcar_i2c_set_scl,
.set_sda = rcar_i2c_set_sda,
+ .get_bus_free = rcar_i2c_get_bus_free,
.recover_bus = i2c_generic_scl_recovery,
};
static void rcar_i2c_init(struct rcar_i2c_priv *priv)
@@ -215,7 +224,7 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv)
static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
{
- int i, ret;
+ int i;
for (i = 0; i < LOOP_TIMEOUT; i++) {
/* make sure that bus is not busy */
@@ -226,13 +235,7 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
/* Waiting did not help, try to recover */
priv->recovery_icmcr = MDBS | OBPC | FSDA | FSCL;
- ret = i2c_recover_bus(&priv->adap);
-
- /* No failure when recovering, so check bus busy bit again */
- if (ret == 0)
- ret = (rcar_i2c_read(priv, ICMCR) & FSDA) ? -EBUSY : 0;
-
- return ret;
+ return i2c_recover_bus(&priv->adap);
}
static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t)
@@ -343,7 +346,10 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICMSR, 0);
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
} else {
- rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+ if (priv->flags & ID_P_REP_AFTER_RD)
+ priv->flags &= ~ID_P_REP_AFTER_RD;
+ else
+ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
rcar_i2c_write(priv, ICMSR, 0);
}
rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
@@ -548,15 +554,15 @@ static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
priv->pos++;
}
- /*
- * If next received data is the _LAST_, go to STOP phase. Might be
- * overwritten by REP START when setting up a new msg. Not elegant
- * but the only stable sequence for REP START I have found so far.
- * If you want to change this code, make sure sending one transfer with
- * four messages (WR-RD-WR-RD) works!
- */
- if (priv->pos + 1 >= msg->len)
- rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
+ /* If next received data is the _LAST_, go to new phase. */
+ if (priv->pos + 1 == msg->len) {
+ if (priv->flags & ID_LAST_MSG) {
+ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
+ } else {
+ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+ priv->flags |= ID_P_REP_AFTER_RD;
+ }
+ }
if (priv->pos == msg->len && !(priv->flags & ID_LAST_MSG))
rcar_i2c_next_msg(priv);
@@ -624,9 +630,11 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
struct rcar_i2c_priv *priv = ptr;
u32 msr, val;
- /* Clear START or STOP as soon as we can */
- val = rcar_i2c_read(priv, ICMCR);
- rcar_i2c_write(priv, ICMCR, val & RCAR_BUS_MASK_DATA);
+ /* Clear START or STOP immediately, except for REPSTART after read */
+ if (likely(!(priv->flags & ID_P_REP_AFTER_RD))) {
+ val = rcar_i2c_read(priv, ICMCR);
+ rcar_i2c_write(priv, ICMCR, val & RCAR_BUS_MASK_DATA);
+ }
msr = rcar_i2c_read(priv, ICMSR);
@@ -795,14 +803,8 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
if (ret < 0)
goto out;
- for (i = 0; i < num; i++) {
- /* This HW can't send STOP after address phase */
- if (msgs[i].len == 0) {
- ret = -EOPNOTSUPP;
- goto out;
- }
+ for (i = 0; i < num; i++)
rcar_i2c_request_dma(priv, msgs + i);
- }
/* init first message */
priv->msg = msgs;
@@ -889,6 +891,10 @@ static const struct i2c_algorithm rcar_i2c_algo = {
.unreg_slave = rcar_unreg_slave,
};
+static const struct i2c_adapter_quirks rcar_i2c_quirks = {
+ .flags = I2C_AQ_NO_ZERO_LEN,
+};
+
static const struct of_device_id rcar_i2c_dt_ids[] = {
{ .compatible = "renesas,i2c-r8a7778", .data = (void *)I2C_RCAR_GEN1 },
{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
@@ -942,6 +948,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
adap->dev.parent = dev;
adap->dev.of_node = dev->of_node;
adap->bus_recovery_info = &rcar_i2c_bri;
+ adap->quirks = &rcar_i2c_quirks;
i2c_set_adapdata(adap, priv);
strlcpy(adap->name, pdev->name, sizeof(adap->name));
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 9fe2b6951895..2f2e28d60ef5 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -919,9 +919,9 @@ static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
(val == CPUFREQ_PRECHANGE && delta_f > 0)) {
- i2c_lock_adapter(&i2c->adap);
+ i2c_lock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER);
ret = s3c24xx_i2c_clockrate(i2c, &got);
- i2c_unlock_adapter(&i2c->adap);
+ i2c_unlock_bus(&i2c->adap, I2C_LOCK_ROOT_ADAPTER);
if (ret < 0)
dev_err(i2c->dev, "cannot find frequency (%d)\n", ret);
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 5fda4188a9e5..9c7f6f8ceb22 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -613,11 +613,6 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
bool do_init)
{
- if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
- dev_err(pd->dev, "Unsupported zero length i2c read\n");
- return -EOPNOTSUPP;
- }
-
if (do_init) {
/* Initialize channel registers */
iic_wr(pd, ICCR, ICCR_SCP);
@@ -758,6 +753,10 @@ static const struct i2c_algorithm sh_mobile_i2c_algorithm = {
.master_xfer = sh_mobile_i2c_xfer,
};
+static const struct i2c_adapter_quirks sh_mobile_i2c_quirks = {
+ .flags = I2C_AQ_NO_ZERO_LEN_READ,
+};
+
/*
* r8a7740 chip has lasting errata on I2C I/O pad reset.
* this is work-around for it.
@@ -925,6 +924,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
adap->owner = THIS_MODULE;
adap->algo = &sh_mobile_i2c_algorithm;
+ adap->quirks = &sh_mobile_i2c_quirks;
adap->dev.parent = &dev->dev;
adap->retries = 5;
adap->nr = dev->id;
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 4053259bccb8..a94e724f51dc 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -590,9 +590,9 @@ static int __maybe_unused sprd_i2c_suspend_noirq(struct device *pdev)
{
struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
- i2c_lock_adapter(&i2c_dev->adap);
+ i2c_lock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER);
i2c_dev->is_suspended = true;
- i2c_unlock_adapter(&i2c_dev->adap);
+ i2c_unlock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER);
return pm_runtime_force_suspend(pdev);
}
@@ -601,9 +601,9 @@ static int __maybe_unused sprd_i2c_resume_noirq(struct device *pdev)
{
struct sprd_i2c *i2c_dev = dev_get_drvdata(pdev);
- i2c_lock_adapter(&i2c_dev->adap);
+ i2c_lock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER);
i2c_dev->is_suspended = false;
- i2c_unlock_adapter(&i2c_dev->adap);
+ i2c_unlock_bus(&i2c_dev->adap, I2C_LOCK_ROOT_ADAPTER);
return pm_runtime_force_resume(pdev);
}
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index fce52bdab2b7..5503fa171df0 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -673,12 +673,6 @@ static int stu300_xfer_msg(struct i2c_adapter *adap,
msg->addr, msg->len, msg->flags, stop);
}
- /* Zero-length messages are not supported by this hardware */
- if (msg->len == 0) {
- ret = -EINVAL;
- goto exit_disable;
- }
-
/*
* For some reason, sending the address sometimes fails when running
* on the 13 MHz clock. No interrupt arrives. This is a work around,
@@ -863,6 +857,10 @@ static const struct i2c_algorithm stu300_algo = {
.functionality = stu300_func,
};
+static const struct i2c_adapter_quirks stu300_quirks = {
+ .flags = I2C_AQ_NO_ZERO_LEN,
+};
+
static int stu300_probe(struct platform_device *pdev)
{
struct stu300_dev *dev;
@@ -920,6 +918,8 @@ static int stu300_probe(struct platform_device *pdev)
adap->algo = &stu300_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
+ adap->quirks = &stu300_quirks;
+
i2c_set_adapdata(adap, dev);
/* i2c device drivers may be active on return from add_adapter() */
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 797def5319f1..60c8561fbe65 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -115,6 +115,18 @@
#define I2C_CONFIG_LOAD_TIMEOUT 1000000
+#define I2C_MST_FIFO_CONTROL 0x0b4
+#define I2C_MST_FIFO_CONTROL_RX_FLUSH BIT(0)
+#define I2C_MST_FIFO_CONTROL_TX_FLUSH BIT(1)
+#define I2C_MST_FIFO_CONTROL_RX_TRIG(x) (((x) - 1) << 4)
+#define I2C_MST_FIFO_CONTROL_TX_TRIG(x) (((x) - 1) << 16)
+
+#define I2C_MST_FIFO_STATUS 0x0b8
+#define I2C_MST_FIFO_STATUS_RX_MASK 0xff
+#define I2C_MST_FIFO_STATUS_RX_SHIFT 0
+#define I2C_MST_FIFO_STATUS_TX_MASK 0xff0000
+#define I2C_MST_FIFO_STATUS_TX_SHIFT 16
+
/*
* msg_end_type: The bus control which need to be send at end of transfer.
* @MSG_END_STOP: Send stop pulse at end of transfer.
@@ -154,6 +166,7 @@ struct tegra_i2c_hw_feature {
u16 clk_divisor_fast_plus_mode;
bool has_multi_master_mode;
bool has_slcg_override_reg;
+ bool has_mst_fifo;
};
/**
@@ -266,13 +279,24 @@ static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
{
unsigned long timeout = jiffies + HZ;
- u32 val = i2c_readl(i2c_dev, I2C_FIFO_CONTROL);
+ unsigned int offset;
+ u32 mask, val;
+
+ if (i2c_dev->hw->has_mst_fifo) {
+ mask = I2C_MST_FIFO_CONTROL_TX_FLUSH |
+ I2C_MST_FIFO_CONTROL_RX_FLUSH;
+ offset = I2C_MST_FIFO_CONTROL;
+ } else {
+ mask = I2C_FIFO_CONTROL_TX_FLUSH |
+ I2C_FIFO_CONTROL_RX_FLUSH;
+ offset = I2C_FIFO_CONTROL;
+ }
- val |= I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH;
- i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
+ val = i2c_readl(i2c_dev, offset);
+ val |= mask;
+ i2c_writel(i2c_dev, val, offset);
- while (i2c_readl(i2c_dev, I2C_FIFO_CONTROL) &
- (I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH)) {
+ while (i2c_readl(i2c_dev, offset) & mask) {
if (time_after(jiffies, timeout)) {
dev_warn(i2c_dev->dev, "timeout waiting for fifo flush\n");
return -ETIMEDOUT;
@@ -290,9 +314,15 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
size_t buf_remaining = i2c_dev->msg_buf_remaining;
int words_to_transfer;
- val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
- rx_fifo_avail = (val & I2C_FIFO_STATUS_RX_MASK) >>
- I2C_FIFO_STATUS_RX_SHIFT;
+ if (i2c_dev->hw->has_mst_fifo) {
+ val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
+ rx_fifo_avail = (val & I2C_MST_FIFO_STATUS_RX_MASK) >>
+ I2C_MST_FIFO_STATUS_RX_SHIFT;
+ } else {
+ val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
+ rx_fifo_avail = (val & I2C_FIFO_STATUS_RX_MASK) >>
+ I2C_FIFO_STATUS_RX_SHIFT;
+ }
/* Rounds down to not include partial word at the end of buf */
words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
@@ -321,6 +351,7 @@ static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
BUG_ON(rx_fifo_avail > 0 && buf_remaining > 0);
i2c_dev->msg_buf_remaining = buf_remaining;
i2c_dev->msg_buf = buf;
+
return 0;
}
@@ -332,9 +363,15 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
size_t buf_remaining = i2c_dev->msg_buf_remaining;
int words_to_transfer;
- val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
- tx_fifo_avail = (val & I2C_FIFO_STATUS_TX_MASK) >>
- I2C_FIFO_STATUS_TX_SHIFT;
+ if (i2c_dev->hw->has_mst_fifo) {
+ val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
+ tx_fifo_avail = (val & I2C_MST_FIFO_STATUS_TX_MASK) >>
+ I2C_MST_FIFO_STATUS_TX_SHIFT;
+ } else {
+ val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
+ tx_fifo_avail = (val & I2C_FIFO_STATUS_TX_MASK) >>
+ I2C_FIFO_STATUS_TX_SHIFT;
+ }
/* Rounds down to not include partial word at the end of buf */
words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
@@ -516,9 +553,15 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
}
- val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
- 0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
- i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
+ if (i2c_dev->hw->has_mst_fifo) {
+ val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) |
+ I2C_MST_FIFO_CONTROL_RX_TRIG(1);
+ i2c_writel(i2c_dev, val, I2C_MST_FIFO_CONTROL);
+ } else {
+ val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
+ 0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
+ i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
+ }
err = tegra_i2c_flush_fifos(i2c_dev);
if (err)
@@ -802,6 +845,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
.has_config_load_reg = false,
.has_multi_master_mode = false,
.has_slcg_override_reg = false,
+ .has_mst_fifo = false,
};
static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
@@ -814,6 +858,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
.has_config_load_reg = false,
.has_multi_master_mode = false,
.has_slcg_override_reg = false,
+ .has_mst_fifo = false,
};
static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
@@ -826,6 +871,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
.has_config_load_reg = false,
.has_multi_master_mode = false,
.has_slcg_override_reg = false,
+ .has_mst_fifo = false,
};
static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
@@ -838,6 +884,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
.has_config_load_reg = true,
.has_multi_master_mode = false,
.has_slcg_override_reg = true,
+ .has_mst_fifo = false,
};
static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
@@ -850,10 +897,25 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
.has_config_load_reg = true,
.has_multi_master_mode = true,
.has_slcg_override_reg = true,
+ .has_mst_fifo = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
+ .has_continue_xfer_support = true,
+ .has_per_pkt_xfer_complete_irq = true,
+ .has_single_clk_source = true,
+ .clk_divisor_hs_mode = 1,
+ .clk_divisor_std_fast_mode = 0x19,
+ .clk_divisor_fast_plus_mode = 0x10,
+ .has_config_load_reg = true,
+ .has_multi_master_mode = true,
+ .has_slcg_override_reg = true,
+ .has_mst_fifo = true,
};
/* Match table for of_platform binding */
static const struct of_device_id tegra_i2c_of_match[] = {
+ { .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
{ .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, },
{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 484bfa15d58e..34cd4b308540 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -173,9 +173,6 @@ static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len,
u8 offset;
u32 xfer;
- if (!len)
- return -EOPNOTSUPP;
-
offset = buf[0];
xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset);
xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr);
@@ -241,9 +238,6 @@ static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr)
unsigned long timeout, stoptime, checktime;
int nbytes, timedout;
- if (!len)
- return -EOPNOTSUPP;
-
xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG,
XLR_I2C_CFG_NOADDR | priv->cfg->cfg_extra);
xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1);
@@ -340,6 +334,10 @@ static const struct i2c_algorithm xlr_i2c_algo = {
.functionality = xlr_func,
};
+static const struct i2c_adapter_quirks xlr_i2c_quirks = {
+ .flags = I2C_AQ_NO_ZERO_LEN,
+};
+
static const struct xlr_i2c_config xlr_i2c_config_default = {
.status_busy = XLR_I2C_BUS_BUSY,
.cfg_extra = 0,
@@ -427,6 +425,7 @@ static int xlr_i2c_probe(struct platform_device *pdev)
priv->adap.owner = THIS_MODULE;
priv->adap.algo_data = priv;
priv->adap.algo = &xlr_i2c_algo;
+ priv->adap.quirks = &xlr_i2c_quirks;
priv->adap.nr = pdev->id;
priv->adap.class = I2C_CLASS_HWMON;
snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c");
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
index 7c3b4740b94b..32affd3fa8bd 100644
--- a/drivers/i2c/i2c-core-acpi.c
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -453,8 +453,12 @@ static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
else
dev_err(&client->adapter->dev, "i2c read %d bytes from client@%#x starting at reg %#x failed, error: %d\n",
data_len, client->addr, cmd, ret);
- } else {
+ /* 2 transfers must have completed successfully */
+ } else if (ret == 2) {
memcpy(data, buffer, data_len);
+ ret = 0;
+ } else {
+ ret = -EIO;
}
kfree(buffer);
@@ -482,11 +486,16 @@ static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
msgs[0].buf = buffer;
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret < 0)
- dev_err(&client->adapter->dev, "i2c write failed\n");
kfree(buffer);
- return ret;
+
+ if (ret < 0) {
+ dev_err(&client->adapter->dev, "i2c write failed: %d\n", ret);
+ return ret;
+ }
+
+ /* 1 transfer must have completed successfully */
+ return (ret == 1) ? 0 : -EIO;
}
static acpi_status
@@ -590,8 +599,6 @@ i2c_acpi_space_handler(u32 function, acpi_physical_address command,
if (action == ACPI_READ) {
status = acpi_gsb_i2c_read_bytes(client, command,
gsb->data, info->access_length);
- if (status > 0)
- status = 0;
} else {
status = acpi_gsb_i2c_write_bytes(client, command,
gsb->data, info->access_length);
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 15c95aaa484c..5a937109a289 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -158,6 +158,22 @@ static void set_sda_gpio_value(struct i2c_adapter *adap, int val)
gpiod_set_value_cansleep(adap->bus_recovery_info->sda_gpiod, val);
}
+static int i2c_generic_bus_free(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ int ret = -EOPNOTSUPP;
+
+ if (bri->get_bus_free)
+ ret = bri->get_bus_free(adap);
+ else if (bri->get_sda)
+ ret = bri->get_sda(adap);
+
+ if (ret < 0)
+ return ret;
+
+ return ret ? 0 : -EBUSY;
+}
+
/*
* We are generating clock pulses. ndelay() determines durating of clk pulses.
* We will generate clock with rate 100 KHz and so duration of both clock levels
@@ -169,21 +185,28 @@ static void set_sda_gpio_value(struct i2c_adapter *adap, int val)
int i2c_generic_scl_recovery(struct i2c_adapter *adap)
{
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
- int i = 0, val = 1, ret = 0;
+ int i = 0, scl = 1, ret;
if (bri->prepare_recovery)
bri->prepare_recovery(adap);
- bri->set_scl(adap, val);
+ /*
+ * If we can set SDA, we will always create a STOP to ensure additional
+ * pulses will do no harm. This is achieved by letting SDA follow SCL
+ * half a cycle later. Check the 'incomplete_write_byte' fault injector
+ * for details.
+ */
+ bri->set_scl(adap, scl);
+ ndelay(RECOVERY_NDELAY / 2);
if (bri->set_sda)
- bri->set_sda(adap, 1);
- ndelay(RECOVERY_NDELAY);
+ bri->set_sda(adap, scl);
+ ndelay(RECOVERY_NDELAY / 2);
/*
* By this time SCL is high, as we need to give 9 falling-rising edges
*/
while (i++ < RECOVERY_CLK_CNT * 2) {
- if (val) {
+ if (scl) {
/* SCL shouldn't be low here */
if (!bri->get_scl(adap)) {
dev_err(&adap->dev,
@@ -191,41 +214,27 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
ret = -EBUSY;
break;
}
- /* Break if SDA is high */
- if (bri->get_sda && bri->get_sda(adap))
- break;
}
- val = !val;
- bri->set_scl(adap, val);
-
- /*
- * If we can set SDA, we will always create STOP here to ensure
- * the additional pulses will do no harm. This is achieved by
- * letting SDA follow SCL half a cycle later.
- */
+ scl = !scl;
+ bri->set_scl(adap, scl);
+ /* Creating STOP again, see above */
ndelay(RECOVERY_NDELAY / 2);
if (bri->set_sda)
- bri->set_sda(adap, val);
+ bri->set_sda(adap, scl);
ndelay(RECOVERY_NDELAY / 2);
- }
- /* check if recovery actually succeeded */
- if (bri->get_sda && !bri->get_sda(adap))
- ret = -EBUSY;
-
- /* If all went well, send STOP for a sane bus state. */
- if (ret == 0 && bri->set_sda) {
- bri->set_scl(adap, 0);
- ndelay(RECOVERY_NDELAY / 2);
- bri->set_sda(adap, 0);
- ndelay(RECOVERY_NDELAY / 2);
- bri->set_scl(adap, 1);
- ndelay(RECOVERY_NDELAY / 2);
- bri->set_sda(adap, 1);
- ndelay(RECOVERY_NDELAY / 2);
+ if (scl) {
+ ret = i2c_generic_bus_free(adap);
+ if (ret == 0)
+ break;
+ }
}
+ /* If we can't check bus status, assume recovery worked */
+ if (ret == -EOPNOTSUPP)
+ ret = 0;
+
if (bri->unprepare_recovery)
bri->unprepare_recovery(adap);
@@ -274,6 +283,10 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
err_str = "no {get|set}_scl() found";
goto err;
}
+ if (!bri->set_sda && !bri->get_sda) {
+ err_str = "either get_sda() or set_sda() needed";
+ goto err;
+ }
}
return;
@@ -1563,6 +1576,8 @@ void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_de
ret = device_property_read_u32(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns);
if (ret && use_defaults)
t->sda_fall_ns = t->scl_fall_ns;
+
+ device_property_read_u32(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns);
}
EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
@@ -1826,9 +1841,15 @@ static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs,
if (msgs[i].flags & I2C_M_RD) {
if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len))
return i2c_quirk_error(adap, &msgs[i], "msg too long");
+
+ if (q->flags & I2C_AQ_NO_ZERO_LEN_READ && len == 0)
+ return i2c_quirk_error(adap, &msgs[i], "no zero length");
} else {
if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len))
return i2c_quirk_error(adap, &msgs[i], "msg too long");
+
+ if (q->flags & I2C_AQ_NO_ZERO_LEN_WRITE && len == 0)
+ return i2c_quirk_error(adap, &msgs[i], "no zero length");
}
}
diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c
index 4a78c65e9971..47a9f70a24a9 100644
--- a/drivers/i2c/i2c-core-slave.c
+++ b/drivers/i2c/i2c-core-slave.c
@@ -47,9 +47,9 @@ int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
client->slave_cb = slave_cb;
- i2c_lock_adapter(client->adapter);
+ i2c_lock_bus(client->adapter, I2C_LOCK_ROOT_ADAPTER);
ret = client->adapter->algo->reg_slave(client);
- i2c_unlock_adapter(client->adapter);
+ i2c_unlock_bus(client->adapter, I2C_LOCK_ROOT_ADAPTER);
if (ret) {
client->slave_cb = NULL;
@@ -69,9 +69,9 @@ int i2c_slave_unregister(struct i2c_client *client)
return -EOPNOTSUPP;
}
- i2c_lock_adapter(client->adapter);
+ i2c_lock_bus(client->adapter, I2C_LOCK_ROOT_ADAPTER);
ret = client->adapter->algo->unreg_slave(client);
- i2c_unlock_adapter(client->adapter);
+ i2c_unlock_bus(client->adapter, I2C_LOCK_ROOT_ADAPTER);
if (ret == 0)
client->slave_cb = NULL;
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 29646aa6132e..f330690b4125 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -87,8 +87,8 @@ static int __i2c_mux_smbus_xfer(struct i2c_adapter *adap,
ret = muxc->select(muxc, priv->chan_id);
if (ret >= 0)
- ret = parent->algo->smbus_xfer(parent, addr, flags,
- read_write, command, size, data);
+ ret = __i2c_smbus_xfer(parent, addr, flags,
+ read_write, command, size, data);
if (muxc->deselect)
muxc->deselect(muxc, priv->chan_id);
diff --git a/drivers/i2c/muxes/i2c-mux-mlxcpld.c b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
index 12ad8d65faf6..f2bf3e57ed67 100644
--- a/drivers/i2c/muxes/i2c-mux-mlxcpld.c
+++ b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
@@ -94,31 +94,11 @@ static int mlxcpld_mux_reg_write(struct i2c_adapter *adap,
struct i2c_client *client, u8 val)
{
struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&client->dev);
- int ret = -ENODEV;
-
- if (adap->algo->master_xfer) {
- struct i2c_msg msg;
- u8 msgbuf[] = {pdata->sel_reg_addr, val};
-
- msg.addr = client->addr;
- msg.flags = 0;
- msg.len = 2;
- msg.buf = msgbuf;
- ret = __i2c_transfer(adap, &msg, 1);
-
- if (ret >= 0 && ret != 1)
- ret = -EREMOTEIO;
- } else if (adap->algo->smbus_xfer) {
- union i2c_smbus_data data;
-
- data.byte = val;
- ret = adap->algo->smbus_xfer(adap, client->addr,
- client->flags, I2C_SMBUS_WRITE,
- pdata->sel_reg_addr,
- I2C_SMBUS_BYTE_DATA, &data);
- }
+ union i2c_smbus_data data = { .byte = val };
- return ret;
+ return __i2c_smbus_xfer(adap, client->addr, client->flags,
+ I2C_SMBUS_WRITE, pdata->sel_reg_addr,
+ I2C_SMBUS_BYTE_DATA, &data);
}
static int mlxcpld_mux_select_chan(struct i2c_mux_core *muxc, u32 chan)
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index 6a39adaf433f..9e75d6b9140b 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -99,31 +99,11 @@ MODULE_DEVICE_TABLE(of, pca9541_of_match);
static int pca9541_reg_write(struct i2c_client *client, u8 command, u8 val)
{
struct i2c_adapter *adap = client->adapter;
- int ret;
-
- if (adap->algo->master_xfer) {
- struct i2c_msg msg;
- char buf[2];
-
- msg.addr = client->addr;
- msg.flags = 0;
- msg.len = 2;
- buf[0] = command;
- buf[1] = val;
- msg.buf = buf;
- ret = __i2c_transfer(adap, &msg, 1);
- } else {
- union i2c_smbus_data data;
-
- data.byte = val;
- ret = adap->algo->smbus_xfer(adap, client->addr,
- client->flags,
- I2C_SMBUS_WRITE,
- command,
- I2C_SMBUS_BYTE_DATA, &data);
- }
+ union i2c_smbus_data data = { .byte = val };
- return ret;
+ return __i2c_smbus_xfer(adap, client->addr, client->flags,
+ I2C_SMBUS_WRITE, command,
+ I2C_SMBUS_BYTE_DATA, &data);
}
/*
@@ -133,41 +113,14 @@ static int pca9541_reg_write(struct i2c_client *client, u8 command, u8 val)
static int pca9541_reg_read(struct i2c_client *client, u8 command)
{
struct i2c_adapter *adap = client->adapter;
+ union i2c_smbus_data data;
int ret;
- u8 val;
-
- if (adap->algo->master_xfer) {
- struct i2c_msg msg[2] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = &command
- },
- {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = &val
- }
- };
- ret = __i2c_transfer(adap, msg, 2);
- if (ret == 2)
- ret = val;
- else if (ret >= 0)
- ret = -EIO;
- } else {
- union i2c_smbus_data data;
-
- ret = adap->algo->smbus_xfer(adap, client->addr,
- client->flags,
- I2C_SMBUS_READ,
- command,
- I2C_SMBUS_BYTE_DATA, &data);
- if (!ret)
- ret = data.byte;
- }
- return ret;
+
+ ret = __i2c_smbus_xfer(adap, client->addr, client->flags,
+ I2C_SMBUS_READ, command,
+ I2C_SMBUS_BYTE_DATA, &data);
+
+ return ret ?: data.byte;
}
/*
@@ -345,11 +298,11 @@ static int pca9541_probe(struct i2c_client *client,
/*
* I2C accesses are unprotected here.
- * We have to lock the adapter before releasing the bus.
+ * We have to lock the I2C segment before releasing the bus.
*/
- i2c_lock_adapter(adap);
+ i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
pca9541_release_bus(client);
- i2c_unlock_adapter(adap);
+ i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
/* Create mux adapter */
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index fbc748027087..24bd9275fde5 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -220,30 +220,11 @@ MODULE_DEVICE_TABLE(of, pca954x_of_match);
static int pca954x_reg_write(struct i2c_adapter *adap,
struct i2c_client *client, u8 val)
{
- int ret = -ENODEV;
-
- if (adap->algo->master_xfer) {
- struct i2c_msg msg;
- char buf[1];
-
- msg.addr = client->addr;
- msg.flags = 0;
- msg.len = 1;
- buf[0] = val;
- msg.buf = buf;
- ret = __i2c_transfer(adap, &msg, 1);
-
- if (ret >= 0 && ret != 1)
- ret = -EREMOTEIO;
- } else {
- union i2c_smbus_data data;
- ret = adap->algo->smbus_xfer(adap, client->addr,
- client->flags,
- I2C_SMBUS_WRITE,
- val, I2C_SMBUS_BYTE, &data);
- }
+ union i2c_smbus_data dummy;
- return ret;
+ return __i2c_smbus_xfer(adap, client->addr, client->flags,
+ I2C_SMBUS_WRITE, val,
+ I2C_SMBUS_BYTE, &dummy);
}
static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
@@ -368,7 +349,8 @@ static int pca954x_probe(struct i2c_client *client,
{
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
- struct device_node *of_node = client->dev.of_node;
+ struct device *dev = &client->dev;
+ struct device_node *np = dev->of_node;
bool idle_disconnect_dt;
struct gpio_desc *gpio;
int num, force, class;
@@ -379,8 +361,7 @@ static int pca954x_probe(struct i2c_client *client,
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
return -ENODEV;
- muxc = i2c_mux_alloc(adap, &client->dev,
- PCA954X_MAX_NCHANS, sizeof(*data), 0,
+ muxc = i2c_mux_alloc(adap, dev, PCA954X_MAX_NCHANS, sizeof(*data), 0,
pca954x_select_chan, pca954x_deselect_mux);
if (!muxc)
return -ENOMEM;
@@ -390,7 +371,7 @@ static int pca954x_probe(struct i2c_client *client,
data->client = client;
/* Reset the mux if a reset GPIO is specified. */
- gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
+ gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
if (gpio) {
@@ -400,7 +381,7 @@ static int pca954x_probe(struct i2c_client *client,
udelay(1);
}
- data->chip = of_device_get_match_data(&client->dev);
+ data->chip = of_device_get_match_data(dev);
if (!data->chip)
data->chip = &chips[id->driver_data];
@@ -414,8 +395,7 @@ static int pca954x_probe(struct i2c_client *client,
if (!ret &&
(id.manufacturer_id != data->chip->id.manufacturer_id ||
id.part_id != data->chip->id.part_id)) {
- dev_warn(&client->dev,
- "unexpected device id %03x-%03x-%x\n",
+ dev_warn(dev, "unexpected device id %03x-%03x-%x\n",
id.manufacturer_id, id.part_id,
id.die_revision);
return -ENODEV;
@@ -427,14 +407,14 @@ static int pca954x_probe(struct i2c_client *client,
* initializes the mux to disconnected state.
*/
if (i2c_smbus_write_byte(client, 0) < 0) {
- dev_warn(&client->dev, "probe failed\n");
+ dev_warn(dev, "probe failed\n");
return -ENODEV;
}
data->last_chan = 0; /* force the first selection */
- idle_disconnect_dt = of_node &&
- of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
+ idle_disconnect_dt = np &&
+ of_property_read_bool(np, "i2c-mux-idle-disconnect");
ret = pca954x_irq_setup(muxc);
if (ret)
@@ -465,7 +445,7 @@ static int pca954x_probe(struct i2c_client *client,
}
if (data->irq) {
- ret = devm_request_threaded_irq(&client->dev, data->client->irq,
+ ret = devm_request_threaded_irq(dev, data->client->irq,
NULL, pca954x_irq_handler,
IRQF_ONESHOT | IRQF_SHARED,
"pca954x", data);
@@ -473,8 +453,7 @@ static int pca954x_probe(struct i2c_client *client,
goto fail_cleanup;
}
- dev_info(&client->dev,
- "registered %d multiplexed busses for I2C %s %s\n",
+ dev_info(dev, "registered %d multiplexed busses for I2C %s %s\n",
num, data->chip->muxtype == pca954x_ismux
? "mux" : "switch", client->name);
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
index d619e8634a00..13a4cec64ea8 100644
--- a/drivers/iio/temperature/mlx90614.c
+++ b/drivers/iio/temperature/mlx90614.c
@@ -433,11 +433,11 @@ static int mlx90614_wakeup(struct mlx90614_data *data)
dev_dbg(&data->client->dev, "Requesting wake-up");
- i2c_lock_adapter(data->client->adapter);
+ i2c_lock_bus(data->client->adapter, I2C_LOCK_ROOT_ADAPTER);
gpiod_direction_output(data->wakeup_gpio, 0);
msleep(MLX90614_TIMING_WAKEUP);
gpiod_direction_input(data->wakeup_gpio);
- i2c_unlock_adapter(data->client->adapter);
+ i2c_unlock_bus(data->client->adapter, I2C_LOCK_ROOT_ADAPTER);
data->ready_timestamp = jiffies +
msecs_to_jiffies(MLX90614_TIMING_STARTUP);
diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c
index bda0500c9b57..714affdd742f 100644
--- a/drivers/input/touchscreen/rohm_bu21023.c
+++ b/drivers/input/touchscreen/rohm_bu21023.c
@@ -304,7 +304,7 @@ static int rohm_i2c_burst_read(struct i2c_client *client, u8 start, void *buf,
msg[1].len = len;
msg[1].buf = buf;
- i2c_lock_adapter(adap);
+ i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
for (i = 0; i < 2; i++) {
if (__i2c_transfer(adap, &msg[i], 1) < 0) {
@@ -313,7 +313,7 @@ static int rohm_i2c_burst_read(struct i2c_client *client, u8 start, void *buf,
}
}
- i2c_unlock_adapter(adap);
+ i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
return ret;
}
diff --git a/drivers/media/dvb-frontends/af9013.c b/drivers/media/dvb-frontends/af9013.c
index f3acbb57d48c..35a93b251aab 100644
--- a/drivers/media/dvb-frontends/af9013.c
+++ b/drivers/media/dvb-frontends/af9013.c
@@ -1311,10 +1311,10 @@ static int af9013_wregs(struct i2c_client *client, u8 cmd, u16 reg,
memcpy(&buf[3], val, len);
if (lock)
- i2c_lock_adapter(client->adapter);
+ i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
ret = __i2c_transfer(client->adapter, msg, 1);
if (lock)
- i2c_unlock_adapter(client->adapter);
+ i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
if (ret < 0) {
goto err;
} else if (ret != 1) {
@@ -1352,10 +1352,10 @@ static int af9013_rregs(struct i2c_client *client, u8 cmd, u16 reg,
buf[2] = cmd;
if (lock)
- i2c_lock_adapter(client->adapter);
+ i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
ret = __i2c_transfer(client->adapter, msg, 2);
if (lock)
- i2c_unlock_adapter(client->adapter);
+ i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
if (ret < 0) {
goto err;
} else if (ret != 2) {
diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c
index f1886945a7bc..84ac3f73f8fe 100644
--- a/drivers/media/dvb-frontends/drxk_hard.c
+++ b/drivers/media/dvb-frontends/drxk_hard.c
@@ -213,7 +213,7 @@ static inline u32 log10times100(u32 value)
static int drxk_i2c_lock(struct drxk_state *state)
{
- i2c_lock_adapter(state->i2c);
+ i2c_lock_bus(state->i2c, I2C_LOCK_SEGMENT);
state->drxk_i2c_exclusive_lock = true;
return 0;
@@ -224,7 +224,7 @@ static void drxk_i2c_unlock(struct drxk_state *state)
if (!state->drxk_i2c_exclusive_lock)
return;
- i2c_unlock_adapter(state->i2c);
+ i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
state->drxk_i2c_exclusive_lock = false;
}
diff --git a/drivers/media/dvb-frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c
index adc9046d5a90..c0659568471b 100644
--- a/drivers/media/dvb-frontends/rtl2830.c
+++ b/drivers/media/dvb-frontends/rtl2830.c
@@ -24,9 +24,9 @@ static int rtl2830_bulk_write(struct i2c_client *client, unsigned int reg,
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret;
- i2c_lock_adapter(client->adapter);
+ i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
ret = regmap_bulk_write(dev->regmap, reg, val, val_count);
- i2c_unlock_adapter(client->adapter);
+ i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
return ret;
}
@@ -36,9 +36,9 @@ static int rtl2830_update_bits(struct i2c_client *client, unsigned int reg,
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret;
- i2c_lock_adapter(client->adapter);
+ i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
ret = regmap_update_bits(dev->regmap, reg, mask, val);
- i2c_unlock_adapter(client->adapter);
+ i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
return ret;
}
@@ -48,9 +48,9 @@ static int rtl2830_bulk_read(struct i2c_client *client, unsigned int reg,
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret;
- i2c_lock_adapter(client->adapter);
+ i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
ret = regmap_bulk_read(dev->regmap, reg, val, val_count);
- i2c_unlock_adapter(client->adapter);
+ i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
return ret;
}
diff --git a/drivers/media/dvb-frontends/tda1004x.c b/drivers/media/dvb-frontends/tda1004x.c
index d402e4b722ca..e506f66657bb 100644
--- a/drivers/media/dvb-frontends/tda1004x.c
+++ b/drivers/media/dvb-frontends/tda1004x.c
@@ -329,7 +329,7 @@ static int tda1004x_do_upload(struct tda1004x_state *state,
tda1004x_write_byteI(state, dspCodeCounterReg, 0);
fw_msg.addr = state->config->demod_address;
- i2c_lock_adapter(state->i2c);
+ i2c_lock_bus(state->i2c, I2C_LOCK_SEGMENT);
buf[0] = dspCodeInReg;
while (pos != len) {
// work out how much to send this time
@@ -342,14 +342,14 @@ static int tda1004x_do_upload(struct tda1004x_state *state,
fw_msg.len = tx_size + 1;
if (__i2c_transfer(state->i2c, &fw_msg, 1) != 1) {
printk(KERN_ERR "tda1004x: Error during firmware upload\n");
- i2c_unlock_adapter(state->i2c);
+ i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
return -EIO;
}
pos += tx_size;
dprintk("%s: fw_pos=0x%x\n", __func__, pos);
}
- i2c_unlock_adapter(state->i2c);
+ i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
/* give the DSP a chance to settle 03/10/05 Hac */
msleep(100);
diff --git a/drivers/media/tuners/tda18271-common.c b/drivers/media/tuners/tda18271-common.c
index 7e81cd887c13..054b3b747dae 100644
--- a/drivers/media/tuners/tda18271-common.c
+++ b/drivers/media/tuners/tda18271-common.c
@@ -225,7 +225,7 @@ static int __tda18271_write_regs(struct dvb_frontend *fe, int idx, int len,
*/
if (lock_i2c) {
tda18271_i2c_gate_ctrl(fe, 1);
- i2c_lock_adapter(priv->i2c_props.adap);
+ i2c_lock_bus(priv->i2c_props.adap, I2C_LOCK_SEGMENT);
}
while (len) {
if (max > len)
@@ -246,7 +246,7 @@ static int __tda18271_write_regs(struct dvb_frontend *fe, int idx, int len,
len -= max;
}
if (lock_i2c) {
- i2c_unlock_adapter(priv->i2c_props.adap);
+ i2c_unlock_bus(priv->i2c_props.adap, I2C_LOCK_SEGMENT);
tda18271_i2c_gate_ctrl(fe, 0);
}
@@ -300,7 +300,7 @@ int tda18271_init_regs(struct dvb_frontend *fe)
* as those could cause bad things
*/
tda18271_i2c_gate_ctrl(fe, 1);
- i2c_lock_adapter(priv->i2c_props.adap);
+ i2c_lock_bus(priv->i2c_props.adap, I2C_LOCK_SEGMENT);
/* initialize registers */
switch (priv->id) {
@@ -516,7 +516,7 @@ int tda18271_init_regs(struct dvb_frontend *fe)
/* synchronize */
__tda18271_write_regs(fe, R_EP1, 1, false);
- i2c_unlock_adapter(priv->i2c_props.adap);
+ i2c_unlock_bus(priv->i2c_props.adap, I2C_LOCK_SEGMENT);
tda18271_i2c_gate_ctrl(fe, 0);
return 0;
diff --git a/drivers/mfd/88pm860x-i2c.c b/drivers/mfd/88pm860x-i2c.c
index 84e313107233..7b9052ea7413 100644
--- a/drivers/mfd/88pm860x-i2c.c
+++ b/drivers/mfd/88pm860x-i2c.c
@@ -146,14 +146,14 @@ int pm860x_page_reg_write(struct i2c_client *i2c, int reg,
unsigned char zero;
int ret;
- i2c_lock_adapter(i2c->adapter);
+ i2c_lock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
read_device(i2c, 0xFA, 0, &zero);
read_device(i2c, 0xFB, 0, &zero);
read_device(i2c, 0xFF, 0, &zero);
ret = write_device(i2c, reg, 1, &data);
read_device(i2c, 0xFE, 0, &zero);
read_device(i2c, 0xFC, 0, &zero);
- i2c_unlock_adapter(i2c->adapter);
+ i2c_unlock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
return ret;
}
EXPORT_SYMBOL(pm860x_page_reg_write);
@@ -164,14 +164,14 @@ int pm860x_page_bulk_read(struct i2c_client *i2c, int reg,
unsigned char zero = 0;
int ret;
- i2c_lock_adapter(i2c->adapter);
+ i2c_lock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
read_device(i2c, 0xfa, 0, &zero);
read_device(i2c, 0xfb, 0, &zero);
read_device(i2c, 0xff, 0, &zero);
ret = read_device(i2c, reg, count, buf);
read_device(i2c, 0xFE, 0, &zero);
read_device(i2c, 0xFC, 0, &zero);
- i2c_unlock_adapter(i2c->adapter);
+ i2c_unlock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
return ret;
}
EXPORT_SYMBOL(pm860x_page_bulk_read);
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index f5cc517d1131..7e50e1d6f58c 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -478,6 +478,23 @@ static void at24_properties_to_pdata(struct device *dev,
if (device_property_present(dev, "no-read-rollover"))
chip->flags |= AT24_FLAG_NO_RDROL;
+ err = device_property_read_u32(dev, "address-width", &val);
+ if (!err) {
+ switch (val) {
+ case 8:
+ if (chip->flags & AT24_FLAG_ADDR16)
+ dev_warn(dev, "Override address width to be 8, while default is 16\n");
+ chip->flags &= ~AT24_FLAG_ADDR16;
+ break;
+ case 16:
+ chip->flags |= AT24_FLAG_ADDR16;
+ break;
+ default:
+ dev_warn(dev, "Bad \"address-width\" property: %u\n",
+ val);
+ }
+ }
+
err = device_property_read_u32(dev, "size", &val);
if (!err)
chip->byte_len = val;