mmc: sh_mobile_sdhi: add support for 2 clocks

Some controllers have 2 clock sources instead of 1. The 2nd clock
is for the internal card detect logic and must be enabled/disabled
along with the main core clock for proper operation.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

1 files changed, 23 insertions, 0 deletions

diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 8bebf35c7576..bc6be0dbea39 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -143,6 +143,7 @@ MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
 
 struct sh_mobile_sdhi {
 	struct clk *clk;
+	struct clk *clk_cd;
 	struct tmio_mmc_data mmc_data;
 	struct tmio_mmc_dma dma_priv;
 	struct pinctrl *pinctrl;
@@ -190,6 +191,12 @@ static int sh_mobile_sdhi_clk_enable(struct tmio_mmc_host *host)
 	if (ret < 0)
 		return ret;
 
+	ret = clk_prepare_enable(priv->clk_cd);
+	if (ret < 0) {
+		clk_disable_unprepare(priv->clk);
+		return ret;
+	}
+
 	/*
 	 * The clock driver may not know what maximum frequency
 	 * actually works, so it should be set with the max-frequency
@@ -255,6 +262,7 @@ static void sh_mobile_sdhi_clk_disable(struct tmio_mmc_host *host)
 	struct sh_mobile_sdhi *priv = host_to_priv(host);
 
 	clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(priv->clk_cd);
 }
 
 static int sh_mobile_sdhi_card_busy(struct mmc_host *mmc)
@@ -572,6 +580,21 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 		goto eprobe;
 	}
 
+	/*
+	 * Some controllers provide a 2nd clock just to run the internal card
+	 * detection logic. Unfortunately, the existing driver architecture does
+	 * not support a separation of clocks for runtime PM usage. When
+	 * native hotplug is used, the tmio driver assumes that the core
+	 * must continue to run for card detect to stay active, so we cannot
+	 * disable it.
+	 * Additionally, it is prohibited to supply a clock to the core but not
+	 * to the card detect circuit. That leaves us with if separate clocks
+	 * are presented, we must treat them both as virtually 1 clock.
+	 */
+	priv->clk_cd = devm_clk_get(&pdev->dev, "cd");
+	if (IS_ERR(priv->clk_cd))
+		priv->clk_cd = NULL;
+
 	priv->pinctrl = devm_pinctrl_get(&pdev->dev);
 	if (!IS_ERR(priv->pinctrl)) {
 		priv->pins_default = pinctrl_lookup_state(priv->pinctrl,