diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-03-14 10:02:40 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-03-14 10:02:40 -0700 |
commit | 6560ca4a0f7b1faacf0480ed0bdb8cd6b6cd2cc8 (patch) | |
tree | 051bccacaf8c1c8d739cd02297302cc477a8697b /drivers | |
parent | 5e15d39f1e7702bccbd52010f52a6dc39c1175de (diff) | |
parent | 5d7f77ec72d10c421bc33958f06a5583f2d27ed6 (diff) | |
download | linux-6560ca4a0f7b1faacf0480ed0bdb8cd6b6cd2cc8.tar.bz2 |
Merge tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty core and serial driver fixes for 4.16-rc6.
They resolve some newly reported bugs, as well as some very old ones,
which is always nice to see. There is also a new device id added in
here for good measure.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: imx: fix bogus dev_err
serial: sh-sci: prevent lockup on full TTY buffers
serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
earlycon: add reg-offset to physical address before mapping
serial: core: mark port as initialized in autoconfig
serial: 8250_pci: Don't fail on multiport card class
tty/serial: atmel: add new version check for usart
tty: make n_tty_read() always abort if hangup is in progress
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/tty/n_tty.c | 6 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 21 | ||||
-rw-r--r-- | drivers/tty/serial/atmel_serial.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/earlycon.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/sh-sci.c | 2 | ||||
-rw-r--r-- | drivers/tty/tty_io.c | 9 |
8 files changed, 41 insertions, 5 deletions
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 5c0e59e8fe46..cbe98bc2b998 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2180,6 +2180,12 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file, } if (tty_hung_up_p(file)) break; + /* + * Abort readers for ttys which never actually + * get hung up. See __tty_hangup(). + */ + if (test_bit(TTY_HUPPING, &tty->flags)) + break; if (!timeout) break; if (file->f_flags & O_NONBLOCK) { diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 54adf8d56350..a93f77ab3da0 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -3387,11 +3387,9 @@ static int serial_pci_is_class_communication(struct pci_dev *dev) /* * If it is not a communications device or the programming * interface is greater than 6, give up. - * - * (Should we try to make guesses for multiport serial devices - * later?) */ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) && ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || (dev->class & 0xff) > 6) return -ENODEV; @@ -3428,6 +3426,12 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) { int num_iomem, num_port, first_port = -1, i; + /* + * Should we try to make guesses for multiport serial devices later? + */ + if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_MULTISERIAL) + return -ENODEV; + num_iomem = num_port = 0; for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { if (pci_resource_flags(dev, i) & IORESOURCE_IO) { @@ -4699,6 +4703,17 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ pbn_b2_4_115200 }, /* + * BrainBoxes UC-260 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D21, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0E34, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + /* * Perle PCI-RAS cards */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index df46a9e88c34..e287fe8f10fc 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1734,6 +1734,7 @@ static void atmel_get_ip_name(struct uart_port *port) switch (version) { case 0x302: case 0x10213: + case 0x10302: dev_dbg(port->dev, "This version is usart\n"); atmel_port->has_frac_baudrate = true; atmel_port->has_hw_timer = true; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 870e84fb6e39..a24278380fec 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -245,11 +245,12 @@ int __init of_setup_earlycon(const struct earlycon_id *match, } port->mapbase = addr; port->uartclk = BASE_BAUD * 16; - port->membase = earlycon_map(port->mapbase, SZ_4K); val = of_get_flat_dt_prop(node, "reg-offset", NULL); if (val) port->mapbase += be32_to_cpu(*val); + port->membase = earlycon_map(port->mapbase, SZ_4K); + val = of_get_flat_dt_prop(node, "reg-shift", NULL); if (val) port->regshift = be32_to_cpu(*val); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 1d7ca382bc12..a33c685af990 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2093,7 +2093,7 @@ static int serial_imx_probe(struct platform_device *pdev) uart_get_rs485_mode(&pdev->dev, &sport->port.rs485); if (sport->port.rs485.flags & SER_RS485_ENABLED && - (!sport->have_rtscts || !sport->have_rtsgpio)) + (!sport->have_rtscts && !sport->have_rtsgpio)) dev_err(&pdev->dev, "no RTS control, disabling rs485\n"); imx_rs485_config(&sport->port, &sport->port.rs485); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index c8dde56b532b..35b9201db3b4 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1144,6 +1144,8 @@ static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) uport->ops->config_port(uport, flags); ret = uart_startup(tty, state, 1); + if (ret == 0) + tty_port_set_initialized(port, true); if (ret > 0) ret = 0; } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 7257c078e155..44adf9db38f8 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -885,6 +885,8 @@ static void sci_receive_chars(struct uart_port *port) /* Tell the rest of the system the news. New characters! */ tty_flip_buffer_push(tport); } else { + /* TTY buffers full; read from RX reg to prevent lockup */ + serial_port_in(port, SCxRDR); serial_port_in(port, SCxSR); /* dummy read */ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); } diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index eb9133b472f4..63114ea35ec1 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -586,6 +586,14 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) return; } + /* + * Some console devices aren't actually hung up for technical and + * historical reasons, which can lead to indefinite interruptible + * sleep in n_tty_read(). The following explicitly tells + * n_tty_read() to abort readers. + */ + set_bit(TTY_HUPPING, &tty->flags); + /* inuse_filps is protected by the single tty lock, this really needs to change if we want to flush the workqueue with the lock held */ @@ -640,6 +648,7 @@ static void __tty_hangup(struct tty_struct *tty, int exit_session) * from the ldisc side, which is now guaranteed. */ set_bit(TTY_HUPPED, &tty->flags); + clear_bit(TTY_HUPPING, &tty->flags); tty_unlock(tty); if (f) |