summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorAndiry Xu <andiry.xu@amd.com>2011-04-19 17:17:39 +0800
committerSarah Sharp <sarah.a.sharp@linux.intel.com>2011-05-03 11:14:32 -0700
commit4f0871a6c7811a433513c3788a7cce27033bb8b8 (patch)
treef532cfb989d412eba133163b74337f4afabd3b02 /drivers
parentcee6a262550f53a13acfefbc1e3e5ff35c96182c (diff)
downloadlinux-4f0871a6c7811a433513c3788a7cce27033bb8b8.tar.bz2
xHCI: Clear PLC in xhci_bus_resume()
This patch clears PORT_PLC if xhci_bus_resume() resumes a previous suspended port, because if a port transition from U3 to U0 state, it will report a port link state change, and software should clear the corresponding PLC bit. It also uses hcd->speed to check if a port is a USB2 protocol port. The patch fixes the issue that USB keyboard can not wakeup system from hibernation. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/host/xhci-hub.c19
1 files changed, 17 insertions, 2 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index a78f2ebd11b7..73f75d26436c 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -777,7 +777,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
if (t1 != t2)
xhci_writel(xhci, t2, port_array[port_index]);
- if (DEV_HIGHSPEED(t1)) {
+ if (hcd->speed != HCD_USB3) {
/* enable remote wake up for USB 2.0 */
u32 __iomem *addr;
u32 tmp;
@@ -866,6 +866,21 @@ int xhci_bus_resume(struct usb_hcd *hcd)
temp |= PORT_LINK_STROBE | XDEV_U0;
xhci_writel(xhci, temp, port_array[port_index]);
}
+ /* wait for the port to enter U0 and report port link
+ * state change.
+ */
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ msleep(20);
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* Clear PLC */
+ temp = xhci_readl(xhci, port_array[port_index]);
+ if (temp & PORT_PLC) {
+ temp = xhci_port_state_to_neutral(temp);
+ temp |= PORT_PLC;
+ xhci_writel(xhci, temp, port_array[port_index]);
+ }
+
slot_id = xhci_find_slot_id_by_port(hcd,
xhci, port_index + 1);
if (slot_id)
@@ -873,7 +888,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
} else
xhci_writel(xhci, temp, port_array[port_index]);
- if (DEV_HIGHSPEED(temp)) {
+ if (hcd->speed != HCD_USB3) {
/* disable remote wake up for USB 2.0 */
u32 __iomem *addr;
u32 tmp;