Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "Most of these are for MMP (seeing a bunch of cleanups and refactorings
  for the first time in a while), and for OMAP (a bunch of cleanups and
  added support for voltage controller on OMAP4430)"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
  ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
  OMAP2: fixup doc comments in omap_device
  ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
  ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED
  ARM: imx: use generic function to exit coherency
  ARM: tegra: Use WFE for power-gating on Tegra30
  ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()
  ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS
  ARM: s3c: Rename s5p_usb_phy functions
  ARM: s3c: Rename s3c64xx_spi_setname() function
  ARM: imx: Add serial number support for i.MX6/7 SoCs
  ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()
  arm64: Introduce config for S32
  ARM: hisi: drop useless depend on ARCH_MULTI_V7
  arm64: realtek: Select reset controller
  ARM: shmobile: rcar-gen2: Drop legacy DT clock support
  ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c
  ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize")
  MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
  ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support
  ...

3 files changed, 23 insertions, 3 deletions

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index dc920daa6dbb..45653a0e6ecd 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -299,6 +299,11 @@ config COMMON_CLK_STM32H7
 	help
 	  Support for stm32h7 SoC family clocks
 
+config COMMON_CLK_MMP2
+	def_bool COMMON_CLK && (MACH_MMP2_DT || MACH_MMP3_DT)
+	help
+	  Support for Marvell MMP2 and MMP3 SoC clocks
+
 config COMMON_CLK_BD718XX
 	tristate "Clock driver for ROHM BD718x7 PMIC"
 	depends on MFD_ROHM_BD718XX || MFD_ROHM_BD70528
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 7bc7ac69391e..acc141adf087 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -8,7 +8,7 @@ obj-y += clk-apbc.o clk-apmu.o clk-frac.o clk-mix.o clk-gate.o clk.o
 obj-$(CONFIG_RESET_CONTROLLER) += reset.o
 
 obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
-obj-$(CONFIG_MACH_MMP2_DT) += clk-of-mmp2.o
+obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o
 
 obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
 obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
diff --git a/drivers/soc/tegra/flowctrl.c b/drivers/soc/tegra/flowctrl.c
index b6bdeef33db1..eb96a3086d6d 100644
--- a/drivers/soc/tegra/flowctrl.c
+++ b/drivers/soc/tegra/flowctrl.c
@@ -91,8 +91,23 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP;
-		/* pwr gating on wfi */
-		reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid;
+
+		if (tegra_get_chip_id() == TEGRA30) {
+			/*
+			 * The wfi doesn't work well on Tegra30 because
+			 * CPU hangs under some odd circumstances after
+			 * power-gating (like memory running off PLLP),
+			 * hence use wfe that is working perfectly fine.
+			 * Note that Tegra30 TRM doc clearly stands that
+			 * wfi should be used for the "Cluster Switching",
+			 * while wfe for the power-gating, just like it
+			 * is done on Tegra20.
+			 */
+			reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
+		} else {
+			/* pwr gating on wfi */
+			reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid;
+		}
 		break;
 	}
 	reg |= FLOW_CTRL_CSR_INTR_FLAG;			/* clear intr flag */