summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorSathya Perla <sathya.perla@emulex.com>2013-03-05 22:23:20 +0000
committerDavid S. Miller <davem@davemloft.net>2013-03-06 14:57:17 -0500
commitc5b3ad4c67989c778e4753be4f91dc7193a04d21 (patch)
treeb2dff2d67ba34df3ec8975cbec4ddc2edffa5f2d /drivers
parentf422d2a04fe2e661fd439c19197a162cc9a36416 (diff)
downloadlinux-c5b3ad4c67989c778e4753be4f91dc7193a04d21.tar.bz2
be2net: use CSR-BAR SEMAPHORE reg for BE2/BE3
The SLIPORT_SEMAPHORE register shadowed in the config-space may not reflect the correct POST stage after an EEH reset in BE2/3; it may return FW_READY state even though FW is not ready. This causes the driver to prematurely poll the FW mailbox and fail. For BE2/3 use the CSR-BAR/0xac instead. Reported-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/ethernet/emulex/benet/be.h1
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.c15
-rw-r--r--drivers/net/ethernet/emulex/benet/be_hw.h4
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c10
4 files changed, 22 insertions, 8 deletions
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 28ceb8414185..29aff55f2eea 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -349,6 +349,7 @@ struct be_adapter {
struct pci_dev *pdev;
struct net_device *netdev;
+ u8 __iomem *csr; /* CSR BAR used only for BE2/3 */
u8 __iomem *db; /* Door Bell */
struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 813407f66c7c..3c9b4f12e3e5 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -473,14 +473,17 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
return 0;
}
-static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
+static u16 be_POST_stage_get(struct be_adapter *adapter)
{
u32 sem;
- u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH :
- SLIPORT_SEMAPHORE_OFFSET_BE;
- pci_read_config_dword(adapter->pdev, reg, &sem);
- *stage = sem & POST_STAGE_MASK;
+ if (BEx_chip(adapter))
+ sem = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx);
+ else
+ pci_read_config_dword(adapter->pdev,
+ SLIPORT_SEMAPHORE_OFFSET_SH, &sem);
+
+ return sem & POST_STAGE_MASK;
}
int lancer_wait_ready(struct be_adapter *adapter)
@@ -574,7 +577,7 @@ int be_fw_wait_ready(struct be_adapter *adapter)
}
do {
- be_POST_stage_get(adapter, &stage);
+ stage = be_POST_stage_get(adapter);
if (stage == POST_STAGE_ARMFW_RDY)
return 0;
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 541d4530d5bf..62dc220695f7 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -32,8 +32,8 @@
#define MPU_EP_CONTROL 0
/********** MPU semphore: used for SH & BE *************/
-#define SLIPORT_SEMAPHORE_OFFSET_BE 0x7c
-#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94
+#define SLIPORT_SEMAPHORE_OFFSET_BEx 0xac /* CSR BAR offset */
+#define SLIPORT_SEMAPHORE_OFFSET_SH 0x94 /* PCI-CFG offset */
#define POST_STAGE_MASK 0x0000FFFF
#define POST_ERR_MASK 0x1
#define POST_ERR_SHIFT 31
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3860888ac711..08e54f3d288b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3688,6 +3688,8 @@ static void be_netdev_init(struct net_device *netdev)
static void be_unmap_pci_bars(struct be_adapter *adapter)
{
+ if (adapter->csr)
+ pci_iounmap(adapter->pdev, adapter->csr);
if (adapter->db)
pci_iounmap(adapter->pdev, adapter->db);
}
@@ -3721,6 +3723,12 @@ static int be_map_pci_bars(struct be_adapter *adapter)
adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
SLI_INTF_IF_TYPE_SHIFT;
+ if (BEx_chip(adapter) && be_physfn(adapter)) {
+ adapter->csr = pci_iomap(adapter->pdev, 2, 0);
+ if (adapter->csr == NULL)
+ return -ENOMEM;
+ }
+
addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
if (addr == NULL)
goto pci_map_err;
@@ -4329,6 +4337,8 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
pci_restore_state(pdev);
/* Check if card is ok and fw is ready */
+ dev_info(&adapter->pdev->dev,
+ "Waiting for FW to be ready after EEH reset\n");
status = be_fw_wait_ready(adapter);
if (status)
return PCI_ERS_RESULT_DISCONNECT;