summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-01-24 10:19:13 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-01-24 10:19:13 -0800
commitba2ab41f3d68f277860768b2c5b197768b196332 (patch)
tree807605fea8dcd16b89a8c4c95838e57e200019b5 /drivers
parentbff92411eb93b2b2a06c4de76e6811486771a76f (diff)
parentefa17194581bdfca0986dabc178908bd7c21ba00 (diff)
downloadlinux-ba2ab41f3d68f277860768b2c5b197768b196332.tar.bz2
Merge tag 'pm+acpi-for-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki: - Two cpuidle initialization fixes from Konrad Rzeszutek Wilk. - cpufreq regression fixes for AMD processors from Borislav Petkov, Stefan Bader, and Matthew Garrett. - ACPI cpufreq fix from Thomas Schlichter. - cpufreq and devfreq fixes related to incorrect usage of operating performance points (OPP) framework and RCU from Nishanth Menon. - APEI workaround for incorrect BIOS information from Lans Zhang. * tag 'pm+acpi-for-3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Add module aliases for acpi-cpufreq ACPI: Check MSR valid bit before using P-state frequencies PM / devfreq: exynos4_bus: honor RCU lock usage PM / devfreq: add locking documentation for recommended_opp cpufreq: cpufreq-cpu0: use RCU locks around usage of OPP cpufreq: OMAP: use RCU locks around usage of OPP ACPI, APEI: Fixup incorrect 64-bit access width firmware bug ACPI / processor: Get power info before updating the C-states powernow-k8: Add a kconfig dependency on acpi-cpufreq ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabled intel_idle: Don't register CPU notifier if we are not running.
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/apei/apei-base.c3
-rw-r--r--drivers/acpi/processor_idle.c4
-rw-r--r--drivers/acpi/processor_perflib.c7
-rw-r--r--drivers/cpufreq/Kconfig.x862
-rw-r--r--drivers/cpufreq/acpi-cpufreq.c7
-rw-r--r--drivers/cpufreq/cpufreq-cpu0.c5
-rw-r--r--drivers/cpufreq/omap-cpufreq.c3
-rw-r--r--drivers/devfreq/devfreq.c5
-rw-r--r--drivers/devfreq/exynos4_bus.c94
-rw-r--r--drivers/idle/intel_idle.c3
10 files changed, 103 insertions, 30 deletions
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index 00a783661d0b..46f80e2c92f7 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -590,6 +590,9 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr,
if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 &&
*access_bit_width < 32)
*access_bit_width = 32;
+ else if (bit_width == 64 && bit_offset == 0 && (*paddr & 0x07) == 0 &&
+ *access_bit_width < 64)
+ *access_bit_width = 64;
if ((bit_width + bit_offset) > *access_bit_width) {
pr_warning(FW_BUG APEI_PFX
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f1a5da44591d..ed9a1cc690be 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -958,6 +958,9 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr)
return -EINVAL;
}
+ if (!dev)
+ return -EINVAL;
+
dev->cpu = pr->id;
if (max_cstate == 0)
@@ -1149,6 +1152,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
}
/* Populate Updated C-state information */
+ acpi_processor_get_power_info(pr);
acpi_processor_setup_cpuidle_states(pr);
/* Enable all cpuidle devices */
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 836bfe069042..53e7ac9403a7 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -340,6 +340,13 @@ static void amd_fixup_frequency(struct acpi_processor_px *px, int i)
if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
|| boot_cpu_data.x86 == 0x11) {
rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi);
+ /*
+ * MSR C001_0064+:
+ * Bit 63: PstateEn. Read-write. If set, the P-state is valid.
+ */
+ if (!(hi & BIT(31)))
+ return;
+
fid = lo & 0x3f;
did = (lo >> 6) & 7;
if (boot_cpu_data.x86 == 0x10)
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index 934854ae5eb4..7227cd734042 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -106,7 +106,7 @@ config X86_POWERNOW_K7_ACPI
config X86_POWERNOW_K8
tristate "AMD Opteron/Athlon64 PowerNow!"
select CPU_FREQ_TABLE
- depends on ACPI && ACPI_PROCESSOR
+ depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ
help
This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors.
Support for K10 and newer processors is now in acpi-cpufreq.
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 0d048f6a2b23..7b0d49d78c61 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -1030,4 +1030,11 @@ MODULE_PARM_DESC(acpi_pstate_strict,
late_initcall(acpi_cpufreq_init);
module_exit(acpi_cpufreq_exit);
+static const struct x86_cpu_id acpi_cpufreq_ids[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_ACPI),
+ X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids);
+
MODULE_ALIAS("acpi");
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 52bf36d599f5..debc5a7c8db6 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -71,12 +71,15 @@ static int cpu0_set_target(struct cpufreq_policy *policy,
}
if (cpu_reg) {
+ rcu_read_lock();
opp = opp_find_freq_ceil(cpu_dev, &freq_Hz);
if (IS_ERR(opp)) {
+ rcu_read_unlock();
pr_err("failed to find OPP for %ld\n", freq_Hz);
return PTR_ERR(opp);
}
volt = opp_get_voltage(opp);
+ rcu_read_unlock();
tol = volt * voltage_tolerance / 100;
volt_old = regulator_get_voltage(cpu_reg);
}
@@ -236,12 +239,14 @@ static int cpu0_cpufreq_driver_init(void)
*/
for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
;
+ rcu_read_lock();
opp = opp_find_freq_exact(cpu_dev,
freq_table[0].frequency * 1000, true);
min_uV = opp_get_voltage(opp);
opp = opp_find_freq_exact(cpu_dev,
freq_table[i-1].frequency * 1000, true);
max_uV = opp_get_voltage(opp);
+ rcu_read_unlock();
ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
if (ret > 0)
transition_latency += ret * 1000;
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 1f3417a8322d..97102b05843f 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -110,13 +110,16 @@ static int omap_target(struct cpufreq_policy *policy,
freq = ret;
if (mpu_reg) {
+ rcu_read_lock();
opp = opp_find_freq_ceil(mpu_dev, &freq);
if (IS_ERR(opp)) {
+ rcu_read_unlock();
dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
__func__, freqs.new);
return -EINVAL;
}
volt = opp_get_voltage(opp);
+ rcu_read_unlock();
tol = volt * OPP_TOLERANCE / 100;
volt_old = regulator_get_voltage(mpu_reg);
}
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 53766f39aadd..3b367973a802 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -994,6 +994,11 @@ module_exit(devfreq_exit);
* @freq: The frequency given to target function
* @flags: Flags handed from devfreq framework.
*
+ * Locking: This function must be called under rcu_read_lock(). opp is a rcu
+ * protected pointer. The reason for the same is that the opp pointer which is
+ * returned will remain valid for use with opp_get_{voltage, freq} only while
+ * under the locked area. The pointer returned must be used prior to unlocking
+ * with rcu_read_unlock() to maintain the integrity of the pointer.
*/
struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq,
u32 flags)
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 80c745e83082..46d94e9e95b5 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -73,6 +73,16 @@ enum busclk_level_idx {
#define EX4210_LV_NUM (LV_2 + 1)
#define EX4x12_LV_NUM (LV_4 + 1)
+/**
+ * struct busfreq_opp_info - opp information for bus
+ * @rate: Frequency in hertz
+ * @volt: Voltage in microvolts corresponding to this OPP
+ */
+struct busfreq_opp_info {
+ unsigned long rate;
+ unsigned long volt;
+};
+
struct busfreq_data {
enum exynos4_busf_type type;
struct device *dev;
@@ -80,7 +90,7 @@ struct busfreq_data {
bool disabled;
struct regulator *vdd_int;
struct regulator *vdd_mif; /* Exynos4412/4212 only */
- struct opp *curr_opp;
+ struct busfreq_opp_info curr_oppinfo;
struct exynos4_ppmu dmc[2];
struct notifier_block pm_notifier;
@@ -296,13 +306,14 @@ static unsigned int exynos4x12_clkdiv_sclkip[][3] = {
};
-static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp)
+static int exynos4210_set_busclk(struct busfreq_data *data,
+ struct busfreq_opp_info *oppi)
{
unsigned int index;
unsigned int tmp;
for (index = LV_0; index < EX4210_LV_NUM; index++)
- if (opp_get_freq(opp) == exynos4210_busclk_table[index].clk)
+ if (oppi->rate == exynos4210_busclk_table[index].clk)
break;
if (index == EX4210_LV_NUM)
@@ -361,13 +372,14 @@ static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp)
return 0;
}
-static int exynos4x12_set_busclk(struct busfreq_data *data, struct opp *opp)
+static int exynos4x12_set_busclk(struct busfreq_data *data,
+ struct busfreq_opp_info *oppi)
{
unsigned int index;
unsigned int tmp;
for (index = LV_0; index < EX4x12_LV_NUM; index++)
- if (opp_get_freq(opp) == exynos4x12_mifclk_table[index].clk)
+ if (oppi->rate == exynos4x12_mifclk_table[index].clk)
break;
if (index == EX4x12_LV_NUM)
@@ -576,11 +588,12 @@ static int exynos4x12_get_intspec(unsigned long mifclk)
return -EINVAL;
}
-static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp,
- struct opp *oldopp)
+static int exynos4_bus_setvolt(struct busfreq_data *data,
+ struct busfreq_opp_info *oppi,
+ struct busfreq_opp_info *oldoppi)
{
int err = 0, tmp;
- unsigned long volt = opp_get_voltage(opp);
+ unsigned long volt = oppi->volt;
switch (data->type) {
case TYPE_BUSF_EXYNOS4210:
@@ -595,11 +608,11 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp,
if (err)
break;
- tmp = exynos4x12_get_intspec(opp_get_freq(opp));
+ tmp = exynos4x12_get_intspec(oppi->rate);
if (tmp < 0) {
err = tmp;
regulator_set_voltage(data->vdd_mif,
- opp_get_voltage(oldopp),
+ oldoppi->volt,
MAX_SAFEVOLT);
break;
}
@@ -609,7 +622,7 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp,
/* Try to recover */
if (err)
regulator_set_voltage(data->vdd_mif,
- opp_get_voltage(oldopp),
+ oldoppi->volt,
MAX_SAFEVOLT);
break;
default:
@@ -626,17 +639,26 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
struct platform_device *pdev = container_of(dev, struct platform_device,
dev);
struct busfreq_data *data = platform_get_drvdata(pdev);
- struct opp *opp = devfreq_recommended_opp(dev, _freq, flags);
- unsigned long freq = opp_get_freq(opp);
- unsigned long old_freq = opp_get_freq(data->curr_opp);
+ struct opp *opp;
+ unsigned long freq;
+ unsigned long old_freq = data->curr_oppinfo.rate;
+ struct busfreq_opp_info new_oppinfo;
- if (IS_ERR(opp))
+ rcu_read_lock();
+ opp = devfreq_recommended_opp(dev, _freq, flags);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
return PTR_ERR(opp);
+ }
+ new_oppinfo.rate = opp_get_freq(opp);
+ new_oppinfo.volt = opp_get_voltage(opp);
+ rcu_read_unlock();
+ freq = new_oppinfo.rate;
if (old_freq == freq)
return 0;
- dev_dbg(dev, "targetting %lukHz %luuV\n", freq, opp_get_voltage(opp));
+ dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt);
mutex_lock(&data->lock);
@@ -644,17 +666,18 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
goto out;
if (old_freq < freq)
- err = exynos4_bus_setvolt(data, opp, data->curr_opp);
+ err = exynos4_bus_setvolt(data, &new_oppinfo,
+ &data->curr_oppinfo);
if (err)
goto out;
if (old_freq != freq) {
switch (data->type) {
case TYPE_BUSF_EXYNOS4210:
- err = exynos4210_set_busclk(data, opp);
+ err = exynos4210_set_busclk(data, &new_oppinfo);
break;
case TYPE_BUSF_EXYNOS4x12:
- err = exynos4x12_set_busclk(data, opp);
+ err = exynos4x12_set_busclk(data, &new_oppinfo);
break;
default:
err = -EINVAL;
@@ -664,11 +687,12 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
goto out;
if (old_freq > freq)
- err = exynos4_bus_setvolt(data, opp, data->curr_opp);
+ err = exynos4_bus_setvolt(data, &new_oppinfo,
+ &data->curr_oppinfo);
if (err)
goto out;
- data->curr_opp = opp;
+ data->curr_oppinfo = new_oppinfo;
out:
mutex_unlock(&data->lock);
return err;
@@ -702,7 +726,7 @@ static int exynos4_bus_get_dev_status(struct device *dev,
exynos4_read_ppmu(data);
busier_dmc = exynos4_get_busier_dmc(data);
- stat->current_frequency = opp_get_freq(data->curr_opp);
+ stat->current_frequency = data->curr_oppinfo.rate;
if (busier_dmc)
addr = S5P_VA_DMC1;
@@ -933,6 +957,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
struct busfreq_data *data = container_of(this, struct busfreq_data,
pm_notifier);
struct opp *opp;
+ struct busfreq_opp_info new_oppinfo;
unsigned long maxfreq = ULONG_MAX;
int err = 0;
@@ -943,18 +968,29 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
data->disabled = true;
+ rcu_read_lock();
opp = opp_find_freq_floor(data->dev, &maxfreq);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ dev_err(data->dev, "%s: unable to find a min freq\n",
+ __func__);
+ return PTR_ERR(opp);
+ }
+ new_oppinfo.rate = opp_get_freq(opp);
+ new_oppinfo.volt = opp_get_voltage(opp);
+ rcu_read_unlock();
- err = exynos4_bus_setvolt(data, opp, data->curr_opp);
+ err = exynos4_bus_setvolt(data, &new_oppinfo,
+ &data->curr_oppinfo);
if (err)
goto unlock;
switch (data->type) {
case TYPE_BUSF_EXYNOS4210:
- err = exynos4210_set_busclk(data, opp);
+ err = exynos4210_set_busclk(data, &new_oppinfo);
break;
case TYPE_BUSF_EXYNOS4x12:
- err = exynos4x12_set_busclk(data, opp);
+ err = exynos4x12_set_busclk(data, &new_oppinfo);
break;
default:
err = -EINVAL;
@@ -962,7 +998,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
if (err)
goto unlock;
- data->curr_opp = opp;
+ data->curr_oppinfo = new_oppinfo;
unlock:
mutex_unlock(&data->lock);
if (err)
@@ -1027,13 +1063,17 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
}
}
+ rcu_read_lock();
opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq);
if (IS_ERR(opp)) {
+ rcu_read_unlock();
dev_err(dev, "Invalid initial frequency %lu kHz.\n",
exynos4_devfreq_profile.initial_freq);
return PTR_ERR(opp);
}
- data->curr_opp = opp;
+ data->curr_oppinfo.rate = opp_get_freq(opp);
+ data->curr_oppinfo.volt = opp_get_voltage(opp);
+ rcu_read_unlock();
platform_set_drvdata(pdev, data);
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 4ba384f1ab54..2df9414a72f7 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -448,8 +448,6 @@ static int intel_idle_probe(void)
else
on_each_cpu(__setup_broadcast_timer, (void *)true, 1);
- register_cpu_notifier(&cpu_hotplug_notifier);
-
pr_debug(PREFIX "v" INTEL_IDLE_VERSION
" model 0x%X\n", boot_cpu_data.x86_model);
@@ -612,6 +610,7 @@ static int __init intel_idle_init(void)
return retval;
}
}
+ register_cpu_notifier(&cpu_hotplug_notifier);
return 0;
}