diff options
author | Heiner Kallweit <hkallweit1@gmail.com> | 2020-04-23 21:38:42 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-04-24 16:47:51 -0700 |
commit | 9576e9fa1c02aea3cf1e42eadcbeb12ccf5e87de (patch) | |
tree | f4d442689a28a1719e0e5a1323679472127df000 /drivers | |
parent | 3194915486b2bc3f77745774f1731b78f32ff688 (diff) | |
download | linux-9576e9fa1c02aea3cf1e42eadcbeb12ccf5e87de.tar.bz2 |
net: phy: clear phydev->suspended after soft reset
If a soft reset is triggered whilst PHY is in power-down, then
phydev->suspended will remain set. Seems we didn't face any issue yet
caused by this, but better reset the suspended flag after soft reset.
See also the following from 22.2.4.1.1
Resetting a PHY is accomplished by setting bit 0.15 to a logic one.
This action shall set the status and control registers to their default
states.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/phy/phy_device.c | 12 |
1 files changed, 11 insertions, 1 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c8f8fd9908fe..7e1ddd5745d2 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1082,8 +1082,12 @@ int phy_init_hw(struct phy_device *phydev) if (!phydev->drv) return 0; - if (phydev->drv->soft_reset) + if (phydev->drv->soft_reset) { ret = phydev->drv->soft_reset(phydev); + /* see comment in genphy_soft_reset for an explanation */ + if (!ret) + phydev->suspended = 0; + } if (ret < 0) return ret; @@ -2157,6 +2161,12 @@ int genphy_soft_reset(struct phy_device *phydev) if (ret < 0) return ret; + /* Clause 22 states that setting bit BMCR_RESET sets control registers + * to their default value. Therefore the POWER DOWN bit is supposed to + * be cleared after soft reset. + */ + phydev->suspended = 0; + ret = phy_poll_reset(phydev); if (ret) return ret; |