diff options
| author | Matthieu CASTET <matthieu.castet@parrot.com> | 2014-02-19 13:46:31 +0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-02-21 12:34:45 -0800 |
| commit | 5bf5dbeda2454296f1984adfbfc8e6f5965ac389 (patch) | |
| tree | c7464044ff490053cba826f45a804de2f9a8fb64 /drivers | |
| parent | 0fd7a820675e9eaa79678c65d6db7dc8f774c90d (diff) | |
| download | linux-5bf5dbeda2454296f1984adfbfc8e6f5965ac389.tar.bz2 | |
usb: chipidea: need to mask when writting endptflush and endptprime
ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.
Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Tested-by: Michael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/chipidea/udc.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 80de2f88ed2c..4ab2cb62dfce 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -105,7 +105,7 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) do { /* flush any pending transfer */ - hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n)); + hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n)); while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) cpu_relax(); } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); @@ -205,7 +205,7 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; - hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n)); + hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n)); while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) cpu_relax(); |