diff options
| author | Bruce Allan <bruce.w.allan@intel.com> | 2011-12-16 00:45:56 +0000 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2012-01-25 23:12:36 -0800 |
| commit | b6fbca2af36530ef307069cff0fe3b1f387c00a9 (patch) | |
| tree | e6b81f2a4424572a1c68621a334e5200377c6ee1 /drivers | |
| parent | 508da4264add2eb13bd4d32bb896e79e6f8821fc (diff) | |
| download | linux-b6fbca2af36530ef307069cff0fe3b1f387c00a9.tar.bz2 | |
e1000e: default IntMode based on kernel config & available hardware support
Based on a patch from Prabhakar Kushwaha <prabhakar@freescale.com>, set
appropriate default interrupt mode dependent on whether CONFIG_PCI_MSI
is enabled in the kernel configuration and if the hardware supports
MSI-X. Set the module parameter log message accordingly.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Cc: Jin Qing <b24347@freescale.com>
Cc: Prabhakar Kushwaha <prabhakar@freescale.com>
Cc: Jin Qing <b24347@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/param.c | 48 |
1 files changed, 41 insertions, 7 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index 20e93b08e7f3..40664f5bfbda 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -113,11 +113,20 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define MAX_ITR 100000 #define MIN_ITR 100 -/* IntMode (Interrupt Mode) +/* + * IntMode (Interrupt Mode) + * + * Valid Range: varies depending on kernel configuration & hardware support + * + * legacy=0, MSI=1, MSI-X=2 * - * Valid Range: 0 - 2 + * When MSI/MSI-X support is enabled in kernel- + * Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise + * When MSI/MSI-X support is not enabled in kernel- + * Default Value: 0 (legacy) * - * Default Value: 2 (MSI-X) + * When a mode is specified that is not allowed/supported, it will be + * demoted to the most advanced interrupt mode available. */ E1000_PARAM(IntMode, "Interrupt Mode"); #define MAX_INTMODE 2 @@ -388,12 +397,33 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) static struct e1000_option opt = { .type = range_option, .name = "Interrupt Mode", - .err = "defaulting to 2 (MSI-X)", - .def = E1000E_INT_MODE_MSIX, - .arg = { .r = { .min = MIN_INTMODE, - .max = MAX_INTMODE } } +#ifndef CONFIG_PCI_MSI + .err = "defaulting to 0 (legacy)", + .def = E1000E_INT_MODE_LEGACY, + .arg = { .r = { .min = 0, + .max = 0 } } +#endif }; +#ifdef CONFIG_PCI_MSI + if (adapter->flags & FLAG_HAS_MSIX) { + opt.err = kstrdup("defaulting to 2 (MSI-X)", + GFP_KERNEL); + opt.def = E1000E_INT_MODE_MSIX; + opt.arg.r.max = E1000E_INT_MODE_MSIX; + } else { + opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL); + opt.def = E1000E_INT_MODE_MSI; + opt.arg.r.max = E1000E_INT_MODE_MSI; + } + + if (!opt.err) { + dev_err(&adapter->pdev->dev, + "Failed to allocate memory\n"); + return; + } +#endif + if (num_IntMode > bd) { unsigned int int_mode = IntMode[bd]; e1000_validate_option(&int_mode, &opt, adapter); @@ -401,6 +431,10 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) } else { adapter->int_mode = opt.def; } + +#ifdef CONFIG_PCI_MSI + kfree(opt.err); +#endif } { /* Smart Power Down */ static const struct e1000_option opt = { |