Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  tty: fix comment for __tty_alloc_driver()
  init/main: properly align the multi-line comment
  init/main: Fix double "the" in comment
  Fix dead URLs to ftp.kernel.org
  drivers: Clean up duplicated email address
  treewide: Fix typo in xml/driver-api/basics.xml
  tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall"
  selftests/timers: Spelling s/privledges/privileges/
  HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/
  net: phy: dp83848: Fix Typo
  UBI: Fix typos
  Documentation: ftrace.txt: Correct nice value of 120 priority
  net: fec: Fix typo in error msg and comment
  treewide: Fix typos in printk

18 files changed, 19 insertions, 20 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 19df4918e37e..d545abbd5378 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -219,7 +219,7 @@ config BLK_DEV_LOOP
 
 	  To use the loop device, you need the losetup utility, found in the
 	  util-linux package, see
-	  <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>.
+	  <https://www.kernel.org/pub/linux/utils/util-linux/>.
 
 	  The loop device driver can also be used to "hide" a file system in
 	  a disk partition, floppy, or regular file, either using encryption
diff --git a/drivers/gpu/drm/sti/sti_compositor.c b/drivers/gpu/drm/sti/sti_compositor.c
index f62041fe8412..11d4e885893a 100644
--- a/drivers/gpu/drm/sti/sti_compositor.c
+++ b/drivers/gpu/drm/sti/sti_compositor.c
@@ -89,7 +89,7 @@ static int sti_compositor_bind(struct device *dev,
 			/* Nothing to do, wait for the second round */
 			break;
 		default:
-			DRM_ERROR("Unknow subdev compoment type\n");
+			DRM_ERROR("Unknown subdev component type\n");
 			return 1;
 		}
 	}
diff --git a/drivers/hid/hid-picolcd_debugfs.c b/drivers/hid/hid-picolcd_debugfs.c
index 3c13af684410..3e0feb4bb538 100644
--- a/drivers/hid/hid-picolcd_debugfs.c
+++ b/drivers/hid/hid-picolcd_debugfs.c
@@ -736,7 +736,7 @@ void picolcd_debug_raw_event(struct picolcd_data *data,
 		}
 		break;
 	case REPORT_MEMORY:
-		/* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */
+		/* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRITE_MEMORY */
 		snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
 			"REPORT_MEMORY", report->id, size-1);
 		hid_debug_event(hdev, buff);
diff --git a/drivers/macintosh/via-macii.c b/drivers/macintosh/via-macii.c
index 3725f088f17e..415c145c8299 100644
--- a/drivers/macintosh/via-macii.c
+++ b/drivers/macintosh/via-macii.c
@@ -12,7 +12,7 @@
  * 1999-08-02 (jmt) - Initial rewrite for Unified ADB.
  * 2000-03-29 Tony Mantler <tonym@mac.linux-m68k.org>
  * 				- Big overhaul, should actually work now.
- * 2006-12-31 Finn Thain <fthain@telegraphics.com.au> - Another overhaul.
+ * 2006-12-31 Finn Thain - Another overhaul.
  *
  * Suggested reading:
  *   Inside Macintosh, ch. 5 ADB Manager
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index b7767da50c26..585ff3284bf5 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -115,7 +115,7 @@ config MD_RAID10
 
 	  RAID-10 requires mdadm-1.7.0 or later, available at:
 
-	  ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/
+	  https://www.kernel.org/pub/linux/utils/raid/mdadm/
 
 	  If unsure, say Y.
 
diff --git a/drivers/media/dvb-frontends/horus3a.c b/drivers/media/dvb-frontends/horus3a.c
index 94bb4f7a2298..68d759c4c52e 100644
--- a/drivers/media/dvb-frontends/horus3a.c
+++ b/drivers/media/dvb-frontends/horus3a.c
@@ -404,6 +404,6 @@ struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe,
 }
 EXPORT_SYMBOL(horus3a_attach);
 
-MODULE_DESCRIPTION("Sony HORUS3A sattelite tuner driver");
+MODULE_DESCRIPTION("Sony HORUS3A satellite tuner driver");
 MODULE_AUTHOR("Sergey Kozlov <serjk@netup.ru>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/mtk-vpu/mtk_vpu.c b/drivers/media/platform/mtk-vpu/mtk_vpu.c
index 463b69c934be..aa44e11decca 100644
--- a/drivers/media/platform/mtk-vpu/mtk_vpu.c
+++ b/drivers/media/platform/mtk-vpu/mtk_vpu.c
@@ -589,7 +589,7 @@ int vpu_load_firmware(struct platform_device *pdev)
 					       );
 	if (ret == 0) {
 		ret = -ETIME;
-		dev_err(dev, "wait vpu initialization timout!\n");
+		dev_err(dev, "wait vpu initialization timeout!\n");
 		goto OUT_LOAD_FW;
 	} else if (-ERESTARTSYS == ret) {
 		dev_err(dev, "wait vpu interrupted by a signal!\n");
diff --git a/drivers/misc/cxl/flash.c b/drivers/misc/cxl/flash.c
index c63d61e17d56..7c61c70ba3f6 100644
--- a/drivers/misc/cxl/flash.c
+++ b/drivers/misc/cxl/flash.c
@@ -343,7 +343,7 @@ static int transfer_image(struct cxl *adapter, int operation,
 			return rc;
 		}
 		if (rc == 0) {
-			pr_devel("remove curent afu\n");
+			pr_devel("remove current afu\n");
 			for (afu = 0; afu < adapter->slices; afu++)
 				cxl_guest_remove_afu(adapter->afu[afu]);
 
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index f0855ce08ed9..43d131f5ae10 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -2,7 +2,7 @@ menuconfig MTD_UBI
 	tristate "Enable UBI - Unsorted block images"
 	select CRC32
 	help
-	  UBI is a software layer above MTD layer which admits of LVM-like
+	  UBI is a software layer above MTD layer which admits use of LVM-like
 	  logical volumes on top of MTD devices, hides some complexities of
 	  flash chips like wear and bad blocks and provides some other useful
 	  capabilities. Please, consult the MTD web site for more details
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index b6fb8f945c21..8290432017ce 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -45,7 +45,7 @@
  * About minimal I/O units. In general, UBI assumes flash device model where
  * there is only one minimal I/O unit size. E.g., in case of NOR flash it is 1,
  * in case of NAND flash it is a NAND page, etc. This is reported by MTD in the
- * @ubi->mtd->writesize field. But as an exception, UBI admits of using another
+ * @ubi->mtd->writesize field. But as an exception, UBI admits use of another
  * (smaller) minimal I/O unit size for EC and VID headers to make it possible
  * to do different optimizations.
  *
diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h
index 697dbcba7371..5fe62653995e 100644
--- a/drivers/mtd/ubi/ubi.h
+++ b/drivers/mtd/ubi/ubi.h
@@ -544,8 +544,7 @@ struct ubi_debug_info {
  * @vid_hdr_aloffset: starting offset of the VID header aligned to
  *                    @hdrs_min_io_size
  * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
- * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
- *               not
+ * @bad_allowed: whether the MTD device admits bad physical eraseblocks or not
  * @nor_flash: non-zero if working on top of NOR flash
  * @max_write_size: maximum amount of bytes the underlying flash can write at a
  *                  time (MTD write buffer size)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index a92bf94f8e94..56a563f90b0b 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2002,7 +2002,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 		mii_speed--;
 	if (mii_speed > 63) {
 		dev_err(&pdev->dev,
-			"fec clock (%lu) to fast to get right mii speed\n",
+			"fec clock (%lu) too fast to get right mii speed\n",
 			clk_get_rate(fep->clk_ipg));
 		err = -EINVAL;
 		goto err_out;
@@ -2948,7 +2948,7 @@ static void set_multicast_list(struct net_device *ndev)
 		}
 
 		/* only upper 6 bits (FEC_HASH_BITS) are used
-		 * which point to specific bit in he hash registers
+		 * which point to specific bit in the hash registers
 		 */
 		hash = (crc >> (32 - FEC_HASH_BITS)) & 0x3f;
 
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index a10d0e7fc5f7..3de4fe4dda77 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -115,5 +115,5 @@ static struct phy_driver dp83848_driver[] = {
 module_phy_driver(dp83848_driver);
 
 MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
-MODULE_AUTHOR("Andrew F. Davis <afd@ti.com");
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 3571ce4bd276..2bc6bace069c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -2111,7 +2111,7 @@ static enum version_8821ae _rtl8821ae_read_chip_version(struct ieee80211_hw *hw)
 		break;
 	default:
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			 "Chip Version ID: Unknow (0x%X)\n", version);
+			 "Chip Version ID: Unknown (0x%X)\n", version);
 		break;
 	}
 
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 043ac9bcbccb..1482d132fbb8 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -241,7 +241,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 					 pin_reg & BIT(ACTIVE_LEVEL_OFF + 1))
 					active_level = "Active on both|";
 				else
-					active_level = "Unknow Active level|";
+					active_level = "Unknown Active level|";
 
 				if (pin_reg & BIT(LEVEL_TRIG_OFF))
 					level_trig = "Level trigger|";
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index 14c0334f41e4..bb567d3b0693 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -631,7 +631,7 @@ static void __exit mac_esp_exit(void)
 }
 
 MODULE_DESCRIPTION("Mac ESP SCSI driver");
-MODULE_AUTHOR("Finn Thain <fthain@telegraphics.com.au>");
+MODULE_AUTHOR("Finn Thain");
 MODULE_LICENSE("GPL v2");
 MODULE_VERSION(DRV_VERSION);
 MODULE_ALIAS("platform:" DRV_MODULE_NAME);
diff --git a/drivers/scsi/snic/snic_scsi.c b/drivers/scsi/snic/snic_scsi.c
index abada16b375b..da979a73baa0 100644
--- a/drivers/scsi/snic/snic_scsi.c
+++ b/drivers/scsi/snic/snic_scsi.c
@@ -1066,7 +1066,7 @@ ioctl_hba_rst:
 	if (!snic->remove_wait) {
 		spin_unlock_irqrestore(io_lock, flags);
 		SNIC_HOST_ERR(snic->shost,
-			      "reset_cmpl:host reset completed after timout\n");
+			      "reset_cmpl:host reset completed after timeout\n");
 		ret = 1;
 
 		return ret;
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index e6d1a6510886..309d25065bb6 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -3370,7 +3370,7 @@ EXPORT_SYMBOL(tty_unregister_device);
 /**
  * __tty_alloc_driver -- allocate tty driver
  * @lines: count of lines this driver can handle at most
- * @owner: module which is repsonsible for this driver
+ * @owner: module which is responsible for this driver
  * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
  *
  * This should not be called directly, some of the provided macros should be