Merge tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull libata fixes from Damien Le Moal:

 - Prevent accesses to unsupported log pages as that causes device scan
   failures with LLDDs using libsas (from me).

 - A couple of fixes for AMD AHCI adapters handling of low power modes
   and resume (from Mario).

 - Fix a compilation warning (from me).

* tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-sata: Declare ata_ncq_sdev_attrs static
  ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
  ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
  ata: libata: add missing ata_identify_page_supported() calls
  ata: libata: improve ata_read_log_page() error message

4 files changed, 25 insertions, 4 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index d60f34718b5d..1e1167e725a4 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -438,6 +438,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* AMD */
 	{ PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
 	{ PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */
+	{ PCI_VDEVICE(AMD, 0x7901), board_ahci_mobile }, /* AMD Green Sardine */
 	/* AMD is using RAID class only for ahci controllers */
 	{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 8a6835bfd18a..f76b8418e6fb 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2323,6 +2323,18 @@ int ahci_port_resume(struct ata_port *ap)
 EXPORT_SYMBOL_GPL(ahci_port_resume);
 
 #ifdef CONFIG_PM
+static void ahci_handle_s2idle(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 devslp;
+
+	if (pm_suspend_via_firmware())
+		return;
+	devslp = readl(port_mmio + PORT_DEVSLP);
+	if ((devslp & PORT_DEVSLP_ADSE))
+		ata_msleep(ap, devslp_idle_timeout);
+}
+
 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 {
 	const char *emsg = NULL;
@@ -2336,6 +2348,9 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 		ata_port_freeze(ap);
 	}
 
+	if (acpi_storage_d3(ap->host->dev))
+		ahci_handle_s2idle(ap);
+
 	ahci_rpm_put_port(ap);
 	return rc;
 }
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8a0ccb190d76..59ad8c979cb3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2031,8 +2031,9 @@ retry:
 			dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
 			goto retry;
 		}
-		ata_dev_err(dev, "Read log page 0x%02x failed, Emask 0x%x\n",
-			    (unsigned int)page, err_mask);
+		ata_dev_err(dev,
+			    "Read log 0x%02x page 0x%02x failed, Emask 0x%x\n",
+			    (unsigned int)log, (unsigned int)page, err_mask);
 	}
 
 	return err_mask;
@@ -2177,6 +2178,9 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev)
 	struct ata_port *ap = dev->link->ap;
 	unsigned int err_mask;
 
+	if (!ata_identify_page_supported(dev, ATA_LOG_SATA_SETTINGS))
+		return;
+
 	err_mask = ata_read_log_page(dev,
 				     ATA_LOG_IDENTIFY_DEVICE,
 				     ATA_LOG_SATA_SETTINGS,
@@ -2453,7 +2457,8 @@ static void ata_dev_config_devslp(struct ata_device *dev)
 	 * Check device sleep capability. Get DevSlp timing variables
 	 * from SATA Settings page of Identify Device Data Log.
 	 */
-	if (!ata_id_has_devslp(dev->id))
+	if (!ata_id_has_devslp(dev->id) ||
+	    !ata_identify_page_supported(dev, ATA_LOG_SATA_SETTINGS))
 		return;
 
 	err_mask = ata_read_log_page(dev,
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 4e88597aa9df..5b78e86e3459 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -922,7 +922,7 @@ DEVICE_ATTR(ncq_prio_enable, S_IRUGO | S_IWUSR,
 	    ata_ncq_prio_enable_show, ata_ncq_prio_enable_store);
 EXPORT_SYMBOL_GPL(dev_attr_ncq_prio_enable);
 
-struct attribute *ata_ncq_sdev_attrs[] = {
+static struct attribute *ata_ncq_sdev_attrs[] = {
 	&dev_attr_unload_heads.attr,
 	&dev_attr_ncq_prio_enable.attr,
 	&dev_attr_ncq_prio_supported.attr,