Remove old lguest bus and drivers.

This gets rid of the lguest bus, drivers and DMA mechanism, to make
way for a generic virtio mechanism.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

10 files changed, 0 insertions, 1385 deletions

diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index d199eba7a080..7691505a2e12 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -32,4 +32,3 @@ obj-$(CONFIG_BLK_DEV_SX8)	+= sx8.o
 obj-$(CONFIG_BLK_DEV_UB)	+= ub.o
 
 obj-$(CONFIG_XEN_BLKDEV_FRONTEND)	+= xen-blkfront.o
-obj-$(CONFIG_LGUEST_BLOCK)	+= lguest_blk.o
diff --git a/drivers/block/lguest_blk.c b/drivers/block/lguest_blk.c
deleted file mode 100644
index fa8e42341b87..000000000000
--- a/drivers/block/lguest_blk.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/*D:400
- * The Guest block driver
- *
- * This is a simple block driver, which appears as /dev/lgba, lgbb, lgbc etc.
- * The mechanism is simple: we place the information about the request in the
- * device page, then use SEND_DMA (containing the data for a write, or an empty
- * "ping" DMA for a read).
- :*/
-/* Copyright 2006 Rusty Russell <rusty@rustcorp.com.au> IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-//#define DEBUG
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/blkdev.h>
-#include <linux/interrupt.h>
-#include <linux/lguest_bus.h>
-
-static char next_block_index = 'a';
-
-/*D:420 Here is the structure which holds all the information we need about
- * each Guest block device.
- *
- * I'm sure at this stage, you're wondering "hey, where was the adventure I was
- * promised?" and thinking "Rusty sucks, I shall say nasty things about him on
- * my blog".  I think Real adventures have boring bits, too, and you're in the
- * middle of one.  But it gets better.  Just not quite yet. */
-struct blockdev
-{
-	/* The block queue infrastructure wants a spinlock: it is held while it
-	 * calls our block request function.  We grab it in our interrupt
-	 * handler so the responses don't mess with new requests. */
-	spinlock_t lock;
-
-	/* The disk structure registered with kernel. */
-	struct gendisk *disk;
-
-	/* The major device number for this disk, and the interrupt.  We only
-	 * really keep them here for completeness; we'd need them if we
-	 * supported device unplugging. */
-	int major;
-	int irq;
-
-	/* The physical address of this device's memory page */
-	unsigned long phys_addr;
-	/* The mapped memory page for convenient acces. */
-	struct lguest_block_page *lb_page;
-
-	/* We only have a single request outstanding at a time: this is it. */
-	struct lguest_dma dma;
-	struct request *req;
-};
-
-/*D:495 We originally used end_request() throughout the driver, but it turns
- * out that end_request() is deprecated, and doesn't actually end the request
- * (which seems like a good reason to deprecate it!).  It simply ends the first
- * bio.  So if we had 3 bios in a "struct request" we would do all 3,
- * end_request(), do 2, end_request(), do 1 and end_request(): twice as much
- * work as we needed to do.
- *
- * This reinforced to me that I do not understand the block layer.
- *
- * Nonetheless, Jens Axboe gave me this nice helper to end all chunks of a
- * request.  This improved disk speed by 130%. */
-static void end_entire_request(struct request *req, int uptodate)
-{
-	if (end_that_request_first(req, uptodate, req->hard_nr_sectors))
-		BUG();
-	add_disk_randomness(req->rq_disk);
-	blkdev_dequeue_request(req);
-	end_that_request_last(req, uptodate);
-}
-
-/* I'm told there are only two stories in the world worth telling: love and
- * hate.  So there used to be a love scene here like this:
- *
- *  Launcher:	We could make beautiful I/O together, you and I.
- *  Guest:	My, that's a big disk!
- *
- * Unfortunately, it was just too raunchy for our otherwise-gentle tale. */
-
-/*D:490 This is the interrupt handler, called when a block read or write has
- * been completed for us. */
-static irqreturn_t lgb_irq(int irq, void *_bd)
-{
-	/* We handed our "struct blockdev" as the argument to request_irq(), so
-	 * it is passed through to us here.  This tells us which device we're
-	 * dealing with in case we have more than one. */
-	struct blockdev *bd = _bd;
-	unsigned long flags;
-
-	/* We weren't doing anything?  Strange, but could happen if we shared
-	 * interrupts (we don't!). */
-	if (!bd->req) {
-		pr_debug("No work!\n");
-		return IRQ_NONE;
-	}
-
-	/* Not done yet?  That's equally strange. */
-	if (!bd->lb_page->result) {
-		pr_debug("No result!\n");
-		return IRQ_NONE;
-	}
-
-	/* We have to grab the lock before ending the request. */
-	spin_lock_irqsave(&bd->lock, flags);
-	/* "result" is 1 for success, 2 for failure: end_entire_request() wants
-	 * to know whether this succeeded or not. */
-	end_entire_request(bd->req, bd->lb_page->result == 1);
-	/* Clear out request, it's done. */
-	bd->req = NULL;
-	/* Reset incoming DMA for next time. */
-	bd->dma.used_len = 0;
-	/* Ready for more reads or writes */
-	blk_start_queue(bd->disk->queue);
-	spin_unlock_irqrestore(&bd->lock, flags);
-
-	/* The interrupt was for us, we dealt with it. */
-	return IRQ_HANDLED;
-}
-
-/*D:480 The block layer's "struct request" contains a number of "struct bio"s,
- * each of which contains "struct bio_vec"s, each of which contains a page, an
- * offset and a length.
- *
- * Fortunately there are iterators to help us walk through the "struct
- * request".  Even more fortunately, there were plenty of places to steal the
- * code from.  We pack the "struct request" into our "struct lguest_dma" and
- * return the total length. */
-static unsigned int req_to_dma(struct request *req, struct lguest_dma *dma)
-{
-	unsigned int i = 0, len = 0;
-	struct req_iterator iter;
-	struct bio_vec *bvec;
-
-	rq_for_each_segment(bvec, req, iter) {
-		/* We told the block layer not to give us too many. */
-		BUG_ON(i == LGUEST_MAX_DMA_SECTIONS);
-		/* If we had a zero-length segment, it would look like
-		 * the end of the data referred to by the "struct
-		 * lguest_dma", so make sure that doesn't happen. */
-		BUG_ON(!bvec->bv_len);
-		/* Convert page & offset to a physical address */
-		dma->addr[i] = page_to_phys(bvec->bv_page)
-			+ bvec->bv_offset;
-		dma->len[i] = bvec->bv_len;
-		len += bvec->bv_len;
-		i++;
-	}
-	/* If the array isn't full, we mark the end with a 0 length */
-	if (i < LGUEST_MAX_DMA_SECTIONS)
-		dma->len[i] = 0;
-	return len;
-}
-
-/* This creates an empty DMA, useful for prodding the Host without sending data
- * (ie. when we want to do a read) */
-static void empty_dma(struct lguest_dma *dma)
-{
-	dma->len[0] = 0;
-}
-
-/*D:470 Setting up a request is fairly easy: */
-static void setup_req(struct blockdev *bd,
-		      int type, struct request *req, struct lguest_dma *dma)
-{
-	/* The type is 1 (write) or 0 (read). */
-	bd->lb_page->type = type;
-	/* The sector on disk where the read or write starts. */
-	bd->lb_page->sector = req->sector;
-	/* The result is initialized to 0 (unfinished). */
-	bd->lb_page->result = 0;
-	/* The current request (so we can end it in the interrupt handler). */
-	bd->req = req;
-	/* The number of bytes: returned as a side-effect of req_to_dma(),
-	 * which packs the block layer's "struct request" into our "struct
-	 * lguest_dma" */
-	bd->lb_page->bytes = req_to_dma(req, dma);
-}
-
-/*D:450 Write is pretty straightforward: we pack the request into a "struct
- * lguest_dma", then use SEND_DMA to send the request. */
-static void do_write(struct blockdev *bd, struct request *req)
-{
-	struct lguest_dma send;
-
-	pr_debug("lgb: WRITE sector %li\n", (long)req->sector);
-	setup_req(bd, 1, req, &send);
-
-	lguest_send_dma(bd->phys_addr, &send);
-}
-
-/* Read is similar to write, except we pack the request into our receive
- * "struct lguest_dma" and send through an empty DMA just to tell the Host that
- * there's a request pending. */
-static void do_read(struct blockdev *bd, struct request *req)
-{
-	struct lguest_dma ping;
-
-	pr_debug("lgb: READ sector %li\n", (long)req->sector);
-	setup_req(bd, 0, req, &bd->dma);
-
-	empty_dma(&ping);
-	lguest_send_dma(bd->phys_addr, &ping);
-}
-
-/*D:440 This where requests come in: we get handed the request queue and are
- * expected to pull a "struct request" off it until we've finished them or
- * we're waiting for a reply: */
-static void do_lgb_request(struct request_queue *q)
-{
-	struct blockdev *bd;
-	struct request *req;
-
-again:
-	/* This sometimes returns NULL even on the very first time around.  I
-	 * wonder if it's something to do with letting elves handle the request
-	 * queue... */
-	req = elv_next_request(q);
-	if (!req)
-		return;
-
-	/* We attached the struct blockdev to the disk: get it back */
-	bd = req->rq_disk->private_data;
-	/* Sometimes we get repeated requests after blk_stop_queue(), but we
-	 * can only handle one at a time. */
-	if (bd->req)
-		return;
-
-	/* We only do reads and writes: no tricky business! */
-	if (!blk_fs_request(req)) {
-		pr_debug("Got non-command 0x%08x\n", req->cmd_type);
-		req->errors++;
-		end_entire_request(req, 0);
-		goto again;
-	}
-
-	if (rq_data_dir(req) == WRITE)
-		do_write(bd, req);
-	else
-		do_read(bd, req);
-
-	/* We've put out the request, so stop any more coming in until we get
-	 * an interrupt, which takes us to lgb_irq() to re-enable the queue. */
-	blk_stop_queue(q);
-}
-
-/*D:430 This is the "struct block_device_operations" we attach to the disk at
- * the end of lguestblk_probe().  It doesn't seem to want much. */
-static struct block_device_operations lguestblk_fops = {
-	.owner = THIS_MODULE,
-};
-
-/*D:425 Setting up a disk device seems to involve a lot of code.  I'm not sure
- * quite why.  I do know that the IDE code sent two or three of the maintainers
- * insane, perhaps this is the fringe of the same disease?
- *
- * As in the console code, the probe function gets handed the generic
- * lguest_device from lguest_bus.c: */
-static int lguestblk_probe(struct lguest_device *lgdev)
-{
-	struct blockdev *bd;
-	int err;
-	int irqflags = IRQF_SHARED;
-
-	/* First we allocate our own "struct blockdev" and initialize the easy
-	 * fields. */
-	bd = kmalloc(sizeof(*bd), GFP_KERNEL);
-	if (!bd)
-		return -ENOMEM;
-
-	spin_lock_init(&bd->lock);
-	bd->irq = lgdev_irq(lgdev);
-	bd->req = NULL;
-	bd->dma.used_len = 0;
-	bd->dma.len[0] = 0;
-	/* The descriptor in the lguest_devices array provided by the Host
-	 * gives the Guest the physical page number of the device's page. */
-	bd->phys_addr = (lguest_devices[lgdev->index].pfn << PAGE_SHIFT);
-
-	/* We use lguest_map() to get a pointer to the device page */
-	bd->lb_page = lguest_map(bd->phys_addr, 1);
-	if (!bd->lb_page) {
-		err = -ENOMEM;
-		goto out_free_bd;
-	}
-
-	/* We need a major device number: 0 means "assign one dynamically". */
-	bd->major = register_blkdev(0, "lguestblk");
-	if (bd->major < 0) {
-		err = bd->major;
-		goto out_unmap;
-	}
-
-	/* This allocates a "struct gendisk" where we pack all the information
-	 * about the disk which the rest of Linux sees.  The argument is the
-	 * number of minor devices desired: we need one minor for the main
-	 * disk, and one for each partition.  Of course, we can't possibly know
-	 * how many partitions are on the disk (add_disk does that).
-	 */
-	bd->disk = alloc_disk(16);
-	if (!bd->disk) {
-		err = -ENOMEM;
-		goto out_unregister_blkdev;
-	}
-
-	/* Every disk needs a queue for requests to come in: we set up the
-	 * queue with a callback function (the core of our driver) and the lock
-	 * to use. */
-	bd->disk->queue = blk_init_queue(do_lgb_request, &bd->lock);
-	if (!bd->disk->queue) {
-		err = -ENOMEM;
-		goto out_put_disk;
-	}
-
-	/* We can only handle a certain number of pointers in our SEND_DMA
-	 * call, so we set that with blk_queue_max_hw_segments().  This is not
-	 * to be confused with blk_queue_max_phys_segments() of course!  I
-	 * know, who could possibly confuse the two?
-	 *
-	 * Well, it's simple to tell them apart: this one seems to work and the
-	 * other one didn't. */
-	blk_queue_max_hw_segments(bd->disk->queue, LGUEST_MAX_DMA_SECTIONS);
-
-	/* Due to technical limitations of our Host (and simple coding) we
-	 * can't have a single buffer which crosses a page boundary.  Tell it
-	 * here.  This means that our maximum request size is 16
-	 * (LGUEST_MAX_DMA_SECTIONS) pages. */
-	blk_queue_segment_boundary(bd->disk->queue, PAGE_SIZE-1);
-
-	/* We name our disk: this becomes the device name when udev does its
-	 * magic thing and creates the device node, such as /dev/lgba.
-	 * next_block_index is a global which starts at 'a'.  Unfortunately
-	 * this simple increment logic means that the 27th disk will be called
-	 * "/dev/lgb{".  In that case, I recommend having at least 29 disks, so
-	 * your /dev directory will be balanced. */
-	sprintf(bd->disk->disk_name, "lgb%c", next_block_index++);
-
-	/* We look to the device descriptor again to see if this device's
-	 * interrupts are expected to be random.  If they are, we tell the irq
-	 * subsystem.  At the moment this bit is always set. */
-	if (lguest_devices[lgdev->index].features & LGUEST_DEVICE_F_RANDOMNESS)
-		irqflags |= IRQF_SAMPLE_RANDOM;
-
-	/* Now we have the name and irqflags, we can request the interrupt; we
-	 * give it the "struct blockdev" we have set up to pass to lgb_irq()
-	 * when there is an interrupt. */
-	err = request_irq(bd->irq, lgb_irq, irqflags, bd->disk->disk_name, bd);
-	if (err)
-		goto out_cleanup_queue;
-
-	/* We bind our one-entry DMA pool to the key for this block device so
-	 * the Host can reply to our requests.  The key is equal to the
-	 * physical address of the device's page, which is conveniently
-	 * unique. */
-	err = lguest_bind_dma(bd->phys_addr, &bd->dma, 1, bd->irq);
-	if (err)
-		goto out_free_irq;
-
-	/* We finish our disk initialization and add the disk to the system. */
-	bd->disk->major = bd->major;
-	bd->disk->first_minor = 0;
-	bd->disk->private_data = bd;
-	bd->disk->fops = &lguestblk_fops;
-	/* This is initialized to the disk size by the Launcher. */
-	set_capacity(bd->disk, bd->lb_page->num_sectors);
-	add_disk(bd->disk);
-
-	printk(KERN_INFO "%s: device %i at major %d\n",
-	       bd->disk->disk_name, lgdev->index, bd->major);
-
-	/* We don't need to keep the "struct blockdev" around, but if we ever
-	 * implemented device removal, we'd need this. */
-	lgdev->private = bd;
-	return 0;
-
-out_free_irq:
-	free_irq(bd->irq, bd);
-out_cleanup_queue:
-	blk_cleanup_queue(bd->disk->queue);
-out_put_disk:
-	put_disk(bd->disk);
-out_unregister_blkdev:
-	unregister_blkdev(bd->major, "lguestblk");
-out_unmap:
-	lguest_unmap(bd->lb_page);
-out_free_bd:
-	kfree(bd);
-	return err;
-}
-
-/*D:410 The boilerplate code for registering the lguest block driver is just
- * like the console: */
-static struct lguest_driver lguestblk_drv = {
-	.name = "lguestblk",
-	.owner = THIS_MODULE,
-	.device_type = LGUEST_DEVICE_T_BLOCK,
-	.probe = lguestblk_probe,
-};
-
-static __init int lguestblk_init(void)
-{
-	return register_lguest_driver(&lguestblk_drv);
-}
-module_init(lguestblk_init);
-
-MODULE_DESCRIPTION("Lguest block driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 057c8bbd7723..07304d50e0cb 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
 obj-$(CONFIG_N_HDLC)		+= n_hdlc.o
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
 obj-$(CONFIG_SX)		+= sx.o generic_serial.o
-obj-$(CONFIG_LGUEST_GUEST)	+= hvc_lguest.o
 obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
 obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
 obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
diff --git a/drivers/char/hvc_lguest.c b/drivers/char/hvc_lguest.c
deleted file mode 100644
index efccb2155830..000000000000
--- a/drivers/char/hvc_lguest.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*D:300
- * The Guest console driver
- *
- * This is a trivial console driver: we use lguest's DMA mechanism to send
- * bytes out, and register a DMA buffer to receive bytes in.  It is assumed to
- * be present and available from the very beginning of boot.
- *
- * Writing console drivers is one of the few remaining Dark Arts in Linux.
- * Fortunately for us, the path of virtual consoles has been well-trodden by
- * the PowerPC folks, who wrote "hvc_console.c" to generically support any
- * virtual console.  We use that infrastructure which only requires us to write
- * the basic put_chars and get_chars functions and call the right register
- * functions.
- :*/
-
-/*M:002 The console can be flooded: while the Guest is processing input the
- * Host can send more.  Buffering in the Host could alleviate this, but it is a
- * difficult problem in general. :*/
-/* Copyright (C) 2006 Rusty Russell, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/lguest_bus.h>
-#include <asm/paravirt.h>
-#include "hvc_console.h"
-
-/*D:340 This is our single console input buffer, with associated "struct
- * lguest_dma" referring to it.  Note the 0-terminated length array, and the
- * use of physical address for the buffer itself. */
-static char inbuf[256];
-static struct lguest_dma cons_input = { .used_len = 0,
-					.addr[0] = __pa(inbuf),
-					.len[0] = sizeof(inbuf),
-					.len[1] = 0 };
-
-/*D:310 The put_chars() callback is pretty straightforward.
- *
- * First we put the pointer and length in a "struct lguest_dma": we only have
- * one pointer, so we set the second length to 0.  Then we use SEND_DMA to send
- * the data to (Host) buffers attached to the console key.  Usually a device's
- * key is a physical address within the device's memory, but because the
- * console device doesn't have any associated physical memory, we use the
- * LGUEST_CONSOLE_DMA_KEY constant (aka 0). */
-static int put_chars(u32 vtermno, const char *buf, int count)
-{
-	struct lguest_dma dma;
-
-	/* FIXME: DMA buffers in a "struct lguest_dma" are not allowed
-	 * to go over page boundaries.  This never seems to happen,
-	 * but if it did we'd need to fix this code. */
-	dma.len[0] = count;
-	dma.len[1] = 0;
-	dma.addr[0] = __pa(buf);
-
-	lguest_send_dma(LGUEST_CONSOLE_DMA_KEY, &dma);
-	/* We're expected to return the amount of data we wrote: all of it. */
-	return count;
-}
-
-/*D:350 get_chars() is the callback from the hvc_console infrastructure when
- * an interrupt is received.
- *
- * Firstly we see if our buffer has been filled: if not, we return.  The rest
- * of the code deals with the fact that the hvc_console() infrastructure only
- * asks us for 16 bytes at a time.  We keep a "cons_offset" variable for
- * partially-read buffers. */
-static int get_chars(u32 vtermno, char *buf, int count)
-{
-	static int cons_offset;
-
-	/* Nothing left to see here... */
-	if (!cons_input.used_len)
-		return 0;
-
-	/* You want more than we have to give?  Well, try wanting less! */
-	if (cons_input.used_len - cons_offset < count)
-		count = cons_input.used_len - cons_offset;
-
-	/* Copy across to their buffer and increment offset. */
-	memcpy(buf, inbuf + cons_offset, count);
-	cons_offset += count;
-
-	/* Finished?  Zero offset, and reset cons_input so Host will use it
-	 * again. */
-	if (cons_offset == cons_input.used_len) {
-		cons_offset = 0;
-		cons_input.used_len = 0;
-	}
-	return count;
-}
-/*:*/
-
-static struct hv_ops lguest_cons = {
-	.get_chars = get_chars,
-	.put_chars = put_chars,
-};
-
-/*D:320 Console drivers are initialized very early so boot messages can go
- * out.  At this stage, the console is output-only.  Our driver checks we're a
- * Guest, and if so hands hvc_instantiate() the console number (0), priority
- * (0), and the struct hv_ops containing the put_chars() function. */
-static int __init cons_init(void)
-{
-	if (strcmp(pv_info.name, "lguest") != 0)
-		return 0;
-
-	return hvc_instantiate(0, 0, &lguest_cons);
-}
-console_initcall(cons_init);
-
-/*D:370 To set up and manage our virtual console, we call hvc_alloc() and
- * stash the result in the private pointer of the "struct lguest_device".
- * Since we never remove the console device we never need this pointer again,
- * but using ->private is considered good form, and you never know who's going
- * to copy your driver.
- *
- * Once the console is set up, we bind our input buffer ready for input. */
-static int lguestcons_probe(struct lguest_device *lgdev)
-{
-	int err;
-
-	/* The first argument of hvc_alloc() is the virtual console number, so
-	 * we use zero.  The second argument is the interrupt number.
-	 *
-	 * The third argument is a "struct hv_ops" containing the put_chars()
-	 * and get_chars() pointers.  The final argument is the output buffer
-	 * size: we use 256 and expect the Host to have room for us to send
-	 * that much. */
-	lgdev->private = hvc_alloc(0, lgdev_irq(lgdev), &lguest_cons, 256);
-	if (IS_ERR(lgdev->private))
-		return PTR_ERR(lgdev->private);
-
-	/* We bind a single DMA buffer at key LGUEST_CONSOLE_DMA_KEY.
-	 * "cons_input" is that statically-initialized global DMA buffer we saw
-	 * above, and we also give the interrupt we want. */
-	err = lguest_bind_dma(LGUEST_CONSOLE_DMA_KEY, &cons_input, 1,
-			      lgdev_irq(lgdev));
-	if (err)
-		printk("lguest console: failed to bind buffer.\n");
-	return err;
-}
-/* Note the use of lgdev_irq() for the interrupt number.  We tell hvc_alloc()
- * to expect input when this interrupt is triggered, and then tell
- * lguest_bind_dma() that is the interrupt to send us when input comes in. */
-
-/*D:360 From now on the console driver follows standard Guest driver form:
- * register_lguest_driver() registers the device type and probe function, and
- * the probe function sets up the device.
- *
- * The standard "struct lguest_driver": */
-static struct lguest_driver lguestcons_drv = {
-	.name = "lguestcons",
-	.owner = THIS_MODULE,
-	.device_type = LGUEST_DEVICE_T_CONSOLE,
-	.probe = lguestcons_probe,
-};
-
-/* The standard init function */
-static int __init hvc_lguest_init(void)
-{
-	return register_lguest_driver(&lguestcons_drv);
-}
-module_init(hvc_lguest_init);
diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig
index 3ec5cc803a09..7eb9ecff8f4a 100644
--- a/drivers/lguest/Kconfig
+++ b/drivers/lguest/Kconfig
@@ -17,13 +17,3 @@ config LGUEST_GUEST
 	  The guest needs code built-in, even if the host has lguest
 	  support as a module.  The drivers are tiny, so we build them
 	  in too.
-
-config LGUEST_NET
-	tristate
-	default y
-	depends on LGUEST_GUEST && NET
-
-config LGUEST_BLOCK
-	tristate
-	default y
-	depends on LGUEST_GUEST && BLOCK
diff --git a/drivers/lguest/Makefile b/drivers/lguest/Makefile
index d330f5b8c456..8c28236ee1ae 100644
--- a/drivers/lguest/Makefile
+++ b/drivers/lguest/Makefile
@@ -1,6 +1,3 @@
-# Guest requires the bus driver.
-obj-$(CONFIG_LGUEST_GUEST) += lguest_bus.o
-
 # Host requires the other files, which can be a module.
 obj-$(CONFIG_LGUEST)	+= lg.o
 lg-y = core.o hypercalls.o page_tables.o interrupts_and_traps.o \
diff --git a/drivers/lguest/lguest_bus.c b/drivers/lguest/lguest_bus.c
deleted file mode 100644
index 2e9a202be44e..000000000000
--- a/drivers/lguest/lguest_bus.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*P:050 Lguest guests use a very simple bus for devices.  It's a simple array
- * of device descriptors contained just above the top of normal memory.  The
- * lguest bus is 80% tedious boilerplate code. :*/
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/lguest_bus.h>
-#include <asm/io.h>
-#include <asm/paravirt.h>
-
-struct lguest_device_desc *lguest_devices;
-
-static ssize_t type_show(struct device *_dev,
-                         struct device_attribute *attr, char *buf)
-{
-	struct lguest_device *dev = container_of(_dev,struct lguest_device,dev);
-	return sprintf(buf, "%hu", lguest_devices[dev->index].type);
-}
-static ssize_t features_show(struct device *_dev,
-                             struct device_attribute *attr, char *buf)
-{
-	struct lguest_device *dev = container_of(_dev,struct lguest_device,dev);
-	return sprintf(buf, "%hx", lguest_devices[dev->index].features);
-}
-static ssize_t pfn_show(struct device *_dev,
-			 struct device_attribute *attr, char *buf)
-{
-	struct lguest_device *dev = container_of(_dev,struct lguest_device,dev);
-	return sprintf(buf, "%u", lguest_devices[dev->index].pfn);
-}
-static ssize_t status_show(struct device *_dev,
-                           struct device_attribute *attr, char *buf)
-{
-	struct lguest_device *dev = container_of(_dev,struct lguest_device,dev);
-	return sprintf(buf, "%hx", lguest_devices[dev->index].status);
-}
-static ssize_t status_store(struct device *_dev, struct device_attribute *attr,
-                            const char *buf, size_t count)
-{
-	struct lguest_device *dev = container_of(_dev,struct lguest_device,dev);
-	if (sscanf(buf, "%hi", &lguest_devices[dev->index].status) != 1)
-		return -EINVAL;
-	return count;
-}
-static struct device_attribute lguest_dev_attrs[] = {
-	__ATTR_RO(type),
-	__ATTR_RO(features),
-	__ATTR_RO(pfn),
-	__ATTR(status, 0644, status_show, status_store),
-	__ATTR_NULL
-};
-
-/*D:130 The generic bus infrastructure requires a function which says whether a
- * device matches a driver.  For us, it is simple: "struct lguest_driver"
- * contains a "device_type" field which indicates what type of device it can
- * handle, so we just cast the args and compare: */
-static int lguest_dev_match(struct device *_dev, struct device_driver *_drv)
-{
-	struct lguest_device *dev = container_of(_dev,struct lguest_device,dev);
-	struct lguest_driver *drv = container_of(_drv,struct lguest_driver,drv);
-
-	return (drv->device_type == lguest_devices[dev->index].type);
-}
-/*:*/
-
-struct lguest_bus {
-	struct bus_type bus;
-	struct device dev;
-};
-
-static struct lguest_bus lguest_bus = {
-	.bus = {
-		.name  = "lguest",
-		.match = lguest_dev_match,
-		.dev_attrs = lguest_dev_attrs,
-	},
-	.dev = {
-		.parent = NULL,
-		.bus_id = "lguest",
-	}
-};
-
-/*D:140 This is the callback which occurs once the bus infrastructure matches
- * up a device and driver, ie. in response to add_lguest_device() calling
- * device_register(), or register_lguest_driver() calling driver_register().
- *
- * At the moment it's always the latter: the devices are added first, since
- * scan_devices() is called from a "core_initcall", and the drivers themselves
- * called later as a normal "initcall".  But it would work the other way too.
- *
- * So now we have the happy couple, we add the status bit to indicate that we
- * found a driver.  If the driver truly loves the device, it will return
- * happiness from its probe function (ok, perhaps this wasn't my greatest
- * analogy), and we set the final "driver ok" bit so the Host sees it's all
- * green. */
-static int lguest_dev_probe(struct device *_dev)
-{
-	int ret;
-	struct lguest_device*dev = container_of(_dev,struct lguest_device,dev);
-	struct lguest_driver*drv = container_of(dev->dev.driver,
-						struct lguest_driver, drv);
-
-	lguest_devices[dev->index].status |= LGUEST_DEVICE_S_DRIVER;
-	ret = drv->probe(dev);
-	if (ret == 0)
-		lguest_devices[dev->index].status |= LGUEST_DEVICE_S_DRIVER_OK;
-	return ret;
-}
-
-/* The last part of the bus infrastructure is the function lguest drivers use
- * to register themselves.  Firstly, we do nothing if there's no lguest bus
- * (ie. this is not a Guest), otherwise we fill in the embedded generic "struct
- * driver" fields and call the generic driver_register(). */
-int register_lguest_driver(struct lguest_driver *drv)
-{
-	if (!lguest_devices)
-		return 0;
-
-	drv->drv.bus = &lguest_bus.bus;
-	drv->drv.name = drv->name;
-	drv->drv.owner = drv->owner;
-	drv->drv.probe = lguest_dev_probe;
-
-	return driver_register(&drv->drv);
-}
-
-/* At the moment we build all the drivers into the kernel because they're so
- * simple: 8144 bytes for all three of them as I type this.  And as the console
- * really needs to be built in, it's actually only 3527 bytes for the network
- * and block drivers.
- *
- * If they get complex it will make sense for them to be modularized, so we
- * need to explicitly export the symbol.
- *
- * I don't think non-GPL modules make sense, so it's a GPL-only export.
- */
-EXPORT_SYMBOL_GPL(register_lguest_driver);
-
-/*D:120 This is the core of the lguest bus: actually adding a new device.
- * It's a separate function because it's neater that way, and because an
- * earlier version of the code supported hotplug and unplug.  They were removed
- * early on because they were never used.
- *
- * As Andrew Tridgell says, "Untested code is buggy code".
- *
- * It's worth reading this carefully: we start with an index into the array of
- * "struct lguest_device_desc"s indicating the device which is new: */
-static void add_lguest_device(unsigned int index)
-{
-	struct lguest_device *new;
-
-	/* Each "struct lguest_device_desc" has a "status" field, which the
-	 * Guest updates as the device is probed.  In the worst case, the Host
-	 * can look at these bits to tell what part of device setup failed,
-	 * even if the console isn't available. */
-	lguest_devices[index].status |= LGUEST_DEVICE_S_ACKNOWLEDGE;
-	new = kmalloc(sizeof(struct lguest_device), GFP_KERNEL);
-	if (!new) {
-		printk(KERN_EMERG "Cannot allocate lguest device %u\n", index);
-		lguest_devices[index].status |= LGUEST_DEVICE_S_FAILED;
-		return;
-	}
-
-	/* The "struct lguest_device" setup is pretty straight-forward example
-	 * code. */
-	new->index = index;
-	new->private = NULL;
-	memset(&new->dev, 0, sizeof(new->dev));
-	new->dev.parent = &lguest_bus.dev;
-	new->dev.bus = &lguest_bus.bus;
-	sprintf(new->dev.bus_id, "%u", index);
-
-	/* device_register() causes the bus infrastructure to look for a
-	 * matching driver. */
-	if (device_register(&new->dev) != 0) {
-		printk(KERN_EMERG "Cannot register lguest device %u\n", index);
-		lguest_devices[index].status |= LGUEST_DEVICE_S_FAILED;
-		kfree(new);
-	}
-}
-
-/*D:110 scan_devices() simply iterates through the device array.  The type 0
- * is reserved to mean "no device", and anything else means we have found a
- * device: add it. */
-static void scan_devices(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < LGUEST_MAX_DEVICES; i++)
-		if (lguest_devices[i].type)
-			add_lguest_device(i);
-}
-
-/*D:100 Fairly early in boot, lguest_bus_init() is called to set up the lguest
- * bus.  We check that we are a Guest by checking paravirt_ops.name: there are
- * other ways of checking, but this seems most obvious to me.
- *
- * So we can access the array of "struct lguest_device_desc"s easily, we map
- * that memory and store the pointer in the global "lguest_devices".  Then we
- * register the bus with the core.  Doing two registrations seems clunky to me,
- * but it seems to be the correct sysfs incantation.
- *
- * Finally we call scan_devices() which adds all the devices found in the
- * "struct lguest_device_desc" array. */
-static int __init lguest_bus_init(void)
-{
-	if (strcmp(pv_info.name, "lguest") != 0)
-		return 0;
-
-	/* Devices are in a single page above top of "normal" mem */
-	lguest_devices = lguest_map(max_pfn<<PAGE_SHIFT, 1);
-
-	if (bus_register(&lguest_bus.bus) != 0
-	    || device_register(&lguest_bus.dev) != 0)
-		panic("lguest bus registration failed");
-
-	scan_devices();
-	return 0;
-}
-/* Do this after core stuff, before devices. */
-postcore_initcall(lguest_bus_init);
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index 39f64c95de18..ef976ccb4192 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -29,7 +29,6 @@
 #include <linux/cpu.h>
 #include <linux/lguest.h>
 #include <linux/lguest_launcher.h>
-#include <linux/lguest_bus.h>
 #include <asm/paravirt.h>
 #include <asm/param.h>
 #include <asm/page.h>
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 6745feb690ff..593262065c9b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -183,7 +183,6 @@ obj-$(CONFIG_ZORRO8390) += zorro8390.o
 obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
 obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
 obj-$(CONFIG_EQUALIZER) += eql.o
-obj-$(CONFIG_LGUEST_NET) += lguest_net.o
 obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
 obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
 obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
diff --git a/drivers/net/lguest_net.c b/drivers/net/lguest_net.c
deleted file mode 100644
index e255476f224f..000000000000
--- a/drivers/net/lguest_net.c
+++ /dev/null
@@ -1,550 +0,0 @@
-/*D:500
- * The Guest network driver.
- *
- * This is very simple a virtual network driver, and our last Guest driver.
- * The only trick is that it can talk directly to multiple other recipients
- * (ie. other Guests on the same network).  It can also be used with only the
- * Host on the network.
- :*/
-
-/* Copyright 2006 Rusty Russell <rusty@rustcorp.com.au> IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-//#define DEBUG
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/module.h>
-#include <linux/mm_types.h>
-#include <linux/io.h>
-#include <linux/lguest_bus.h>
-
-#define SHARED_SIZE		PAGE_SIZE
-#define MAX_LANS		4
-#define NUM_SKBS		8
-
-/*M:011 Network code master Jeff Garzik points out numerous shortcomings in
- * this driver if it aspires to greatness.
- *
- * Firstly, it doesn't use "NAPI": the networking's New API, and is poorer for
- * it.  As he says "NAPI means system-wide load leveling, across multiple
- * network interfaces.  Lack of NAPI can mean competition at higher loads."
- *
- * He also points out that we don't implement set_mac_address, so users cannot
- * change the devices hardware address.  When I asked why one would want to:
- * "Bonding, and situations where you /do/ want the MAC address to "leak" out
- * of the host onto the wider net."
- *
- * Finally, he would like module unloading: "It is not unrealistic to think of
- * [un|re|]loading the net support module in an lguest guest.  And, adding
- * module support makes the programmer more responsible, because they now have
- * to learn to clean up after themselves.  Any driver that cannot clean up
- * after itself is an incomplete driver in my book."
- :*/
-
-/*D:530 The "struct lguestnet_info" contains all the information we need to
- * know about the network device. */
-struct lguestnet_info
-{
-	/* The mapped device page(s) (an array of "struct lguest_net"). */
-	struct lguest_net *peer;
-	/* The physical address of the device page(s) */
-	unsigned long peer_phys;
-	/* The size of the device page(s). */
-	unsigned long mapsize;
-
-	/* The lguest_device I come from */
-	struct lguest_device *lgdev;
-
-	/* My peerid (ie. my slot in the array). */
-	unsigned int me;
-
-	/* Receive queue: the network packets waiting to be filled. */
-	struct sk_buff *skb[NUM_SKBS];
-	struct lguest_dma dma[NUM_SKBS];
-};
-/*:*/
-
-/* How many bytes left in this page. */
-static unsigned int rest_of_page(void *data)
-{
-	return PAGE_SIZE - ((unsigned long)data % PAGE_SIZE);
-}
-
-/*D:570 Each peer (ie. Guest or Host) on the network binds their receive
- * buffers to a different key: we simply use the physical address of the
- * device's memory page plus the peer number.  The Host insists that all keys
- * be a multiple of 4, so we multiply the peer number by 4. */
-static unsigned long peer_key(struct lguestnet_info *info, unsigned peernum)
-{
-	return info->peer_phys + 4 * peernum;
-}
-
-/* This is the routine which sets up a "struct lguest_dma" to point to a
- * network packet, similar to req_to_dma() in lguest_blk.c.  The structure of a
- * "struct sk_buff" has grown complex over the years: it consists of a "head"
- * linear section pointed to by "skb->data", and possibly an array of
- * "fragments" in the case of a non-linear packet.
- *
- * Our receive buffers don't use fragments at all but outgoing skbs might, so
- * we handle it. */
-static void skb_to_dma(const struct sk_buff *skb, unsigned int headlen,
-		       struct lguest_dma *dma)
-{
-	unsigned int i, seg;
-
-	/* First, we put the linear region into the "struct lguest_dma".  Each
-	 * entry can't go over a page boundary, so even though all our packets
-	 * are 1514 bytes or less, we might need to use two entries here: */
-	for (i = seg = 0; i < headlen; seg++, i += rest_of_page(skb->data+i)) {
-		dma->addr[seg] = virt_to_phys(skb->data + i);
-		dma->len[seg] = min((unsigned)(headlen - i),
-				    rest_of_page(skb->data + i));
-	}
-
-	/* Now we handle the fragments: at least they're guaranteed not to go
-	 * over a page.  skb_shinfo(skb) returns a pointer to the structure
-	 * which tells us about the number of fragments and the fragment
-	 * array. */
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++, seg++) {
-		const skb_frag_t *f = &skb_shinfo(skb)->frags[i];
-		/* Should not happen with MTU less than 64k - 2 * PAGE_SIZE. */
-		if (seg == LGUEST_MAX_DMA_SECTIONS) {
-			/* We will end up sending a truncated packet should
-			 * this ever happen.  Plus, a cool log message! */
-			printk("Woah dude!  Megapacket!\n");
-			break;
-		}
-		dma->addr[seg] = page_to_phys(f->page) + f->page_offset;
-		dma->len[seg] = f->size;
-	}
-
-	/* If after all that we didn't use the entire "struct lguest_dma"
-	 * array, we terminate it with a 0 length. */
-	if (seg < LGUEST_MAX_DMA_SECTIONS)
-		dma->len[seg] = 0;
-}
-
-/*
- * Packet transmission.
- *
- * Our packet transmission is a little unusual.  A real network card would just
- * send out the packet and leave the receivers to decide if they're interested.
- * Instead, we look through the network device memory page and see if any of
- * the ethernet addresses match the packet destination, and if so we send it to
- * that Guest.
- *
- * This is made a little more complicated in two cases.  The first case is
- * broadcast packets: for that we send the packet to all Guests on the network,
- * one at a time.  The second case is "promiscuous" mode, where a Guest wants
- * to see all the packets on the network.  We need a way for the Guest to tell
- * us it wants to see all packets, so it sets the "multicast" bit on its
- * published MAC address, which is never valid in a real ethernet address.
- */
-#define PROMISC_BIT		0x01
-
-/* This is the callback which is summoned whenever the network device's
- * multicast or promiscuous state changes.  If the card is in promiscuous mode,
- * we advertise that in our ethernet address in the device's memory.  We do the
- * same if Linux wants any or all multicast traffic.  */
-static void lguestnet_set_multicast(struct net_device *dev)
-{
-	struct lguestnet_info *info = netdev_priv(dev);
-
-	if ((dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) || dev->mc_count)
-		info->peer[info->me].mac[0] |= PROMISC_BIT;
-	else
-		info->peer[info->me].mac[0] &= ~PROMISC_BIT;
-}
-
-/* A simple test function to see if a peer wants to see all packets.*/
-static int promisc(struct lguestnet_info *info, unsigned int peer)
-{
-	return info->peer[peer].mac[0] & PROMISC_BIT;
-}
-
-/* Another simple function to see if a peer's advertised ethernet address
- * matches a packet's destination ethernet address. */
-static int mac_eq(const unsigned char mac[ETH_ALEN],
-		  struct lguestnet_info *info, unsigned int peer)
-{
-	/* Ignore multicast bit, which peer turns on to mean promisc. */
-	if ((info->peer[peer].mac[0] & (~PROMISC_BIT)) != mac[0])
-		return 0;
-	return memcmp(mac+1, info->peer[peer].mac+1, ETH_ALEN-1) == 0;
-}
-
-/* This is the function which actually sends a packet once we've decided a
- * peer wants it: */
-static void transfer_packet(struct net_device *dev,
-			    struct sk_buff *skb,
-			    unsigned int peernum)
-{
-	struct lguestnet_info *info = netdev_priv(dev);
-	struct lguest_dma dma;
-
-	/* We use our handy "struct lguest_dma" packing function to prepare
-	 * the skb for sending. */
-	skb_to_dma(skb, skb_headlen(skb), &dma);
-	pr_debug("xfer length %04x (%u)\n", htons(skb->len), skb->len);
-
-	/* This is the actual send call which copies the packet. */
-	lguest_send_dma(peer_key(info, peernum), &dma);
-
-	/* Check that the entire packet was transmitted.  If not, it could mean
-	 * that the other Guest registered a short receive buffer, but this
-	 * driver should never do that.  More likely, the peer is dead. */
-	if (dma.used_len != skb->len) {
-		dev->stats.tx_carrier_errors++;
-		pr_debug("Bad xfer to peer %i: %i of %i (dma %p/%i)\n",
-			 peernum, dma.used_len, skb->len,
-			 (void *)dma.addr[0], dma.len[0]);
-	} else {
-		/* On success we update the stats. */
-		dev->stats.tx_bytes += skb->len;
-		dev->stats.tx_packets++;
-	}
-}
-
-/* Another helper function to tell is if a slot in the device memory is unused.
- * Since we always set the Local Assignment bit in the ethernet address, the
- * first byte can never be 0. */
-static int unused_peer(const struct lguest_net peer[], unsigned int num)
-{
-	return peer[num].mac[0] == 0;
-}
-
-/* Finally, here is the routine which handles an outgoing packet.  It's called
- * "start_xmit" for traditional reasons. */
-static int lguestnet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	unsigned int i;
-	int broadcast;
-	struct lguestnet_info *info = netdev_priv(dev);
-	/* Extract the destination ethernet address from the packet. */
-	const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
-	DECLARE_MAC_BUF(mac);
-
-	pr_debug("%s: xmit %s\n", dev->name, print_mac(mac, dest));
-
-	/* If it's a multicast packet, we broadcast to everyone.  That's not
-	 * very efficient, but there are very few applications which actually
-	 * use multicast, which is a shame really.
-	 *
-	 * As etherdevice.h points out: "By definition the broadcast address is
-	 * also a multicast address."  So we don't have to test for broadcast
-	 * packets separately. */
-	broadcast = is_multicast_ether_addr(dest);
-
-	/* Look through all the published ethernet addresses to see if we
-	 * should send this packet. */
-	for (i = 0; i < info->mapsize/sizeof(struct lguest_net); i++) {
-		/* We don't send to ourselves (we actually can't SEND_DMA to
-		 * ourselves anyway), and don't send to unused slots.*/
-		if (i == info->me || unused_peer(info->peer, i))
-			continue;
-
-		/* If it's broadcast we send it.  If they want every packet we
-		 * send it.  If the destination matches their address we send
-		 * it.  Otherwise we go to the next peer. */
-		if (!broadcast && !promisc(info, i) && !mac_eq(dest, info, i))
-			continue;
-
-		pr_debug("lguestnet %s: sending from %i to %i\n",
-			 dev->name, info->me, i);
-		/* Our routine which actually does the transfer. */
-		transfer_packet(dev, skb, i);
-	}
-
-	/* An xmit routine is expected to dispose of the packet, so we do. */
-	dev_kfree_skb(skb);
-
-	/* As per kernel convention, 0 means success.  This is why I love
-	 * networking: even if we never sent to anyone, that's still
-	 * success! */
-	return 0;
-}
-
-/*D:560
- * Packet receiving.
- *
- * First, here's a helper routine which fills one of our array of receive
- * buffers: */
-static int fill_slot(struct net_device *dev, unsigned int slot)
-{
-	struct lguestnet_info *info = netdev_priv(dev);
-
-	/* We can receive ETH_DATA_LEN (1500) byte packets, plus a standard
-	 * ethernet header of ETH_HLEN (14) bytes. */
-	info->skb[slot] = netdev_alloc_skb(dev, ETH_HLEN + ETH_DATA_LEN);
-	if (!info->skb[slot]) {
-		printk("%s: could not fill slot %i\n", dev->name, slot);
-		return -ENOMEM;
-	}
-
-	/* skb_to_dma() is a helper which sets up the "struct lguest_dma" to
-	 * point to the data in the skb: we also use it for sending out a
-	 * packet. */
-	skb_to_dma(info->skb[slot], ETH_HLEN + ETH_DATA_LEN, &info->dma[slot]);
-
-	/* This is a Write Memory Barrier: it ensures that the entry in the
-	 * receive buffer array is written *before* we set the "used_len" entry
-	 * to 0.  If the Host were looking at the receive buffer array from a
-	 * different CPU, it could potentially see "used_len = 0" and not see
-	 * the updated receive buffer information.  This would be a horribly
-	 * nasty bug, so make sure the compiler and CPU know this has to happen
-	 * first. */
-	wmb();
-	/* Writing 0 to "used_len" tells the Host it can use this receive
-	 * buffer now. */
-	info->dma[slot].used_len = 0;
-	return 0;
-}
-
-/* This is the actual receive routine.  When we receive an interrupt from the
- * Host to tell us a packet has been delivered, we arrive here: */
-static irqreturn_t lguestnet_rcv(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct lguestnet_info *info = netdev_priv(dev);
-	unsigned int i, done = 0;
-
-	/* Look through our entire receive array for an entry which has data
-	 * in it. */
-	for (i = 0; i < ARRAY_SIZE(info->dma); i++) {
-		unsigned int length;
-		struct sk_buff *skb;
-
-		length = info->dma[i].used_len;
-		if (length == 0)
-			continue;
-
-		/* We've found one!  Remember the skb (we grabbed the length
-		 * above), and immediately refill the slot we've taken it
-		 * from. */
-		done++;
-		skb = info->skb[i];
-		fill_slot(dev, i);
-
-		/* This shouldn't happen: micropackets could be sent by a
-		 * badly-behaved Guest on the network, but the Host will never
-		 * stuff more data in the buffer than the buffer length. */
-		if (length < ETH_HLEN || length > ETH_HLEN + ETH_DATA_LEN) {
-			pr_debug(KERN_WARNING "%s: unbelievable skb len: %i\n",
-				 dev->name, length);
-			dev_kfree_skb(skb);
-			continue;
-		}
-
-		/* skb_put(), what a great function!  I've ranted about this
-		 * function before (http://lkml.org/lkml/1999/9/26/24).  You
-		 * call it after you've added data to the end of an skb (in
-		 * this case, it was the Host which wrote the data). */
-		skb_put(skb, length);
-
-		/* The ethernet header contains a protocol field: we use the
-		 * standard helper to extract it, and place the result in
-		 * skb->protocol.  The helper also sets up skb->pkt_type and
-		 * eats up the ethernet header from the front of the packet. */
-		skb->protocol = eth_type_trans(skb, dev);
-
-		/* If this device doesn't need checksums for sending, we also
-		 * don't need to check the packets when they come in. */
-		if (dev->features & NETIF_F_NO_CSUM)
-			skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-		/* As a last resort for debugging the driver or the lguest I/O
-		 * subsystem, you can uncomment the "#define DEBUG" at the top
-		 * of this file, which turns all the pr_debug() into printk()
-		 * and floods the logs. */
-		pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
-			 ntohs(skb->protocol), skb->len, skb->pkt_type);
-
-		/* Update the packet and byte counts (visible from ifconfig,
-		 * and good for debugging). */
-		dev->stats.rx_bytes += skb->len;
-		dev->stats.rx_packets++;
-
-		/* Hand our fresh network packet into the stack's "network
-		 * interface receive" routine.  That will free the packet
-		 * itself when it's finished. */
-		netif_rx(skb);
-	}
-
-	/* If we found any packets, we assume the interrupt was for us. */
-	return done ? IRQ_HANDLED : IRQ_NONE;
-}
-
-/*D:550 This is where we start: when the device is brought up by dhcpd or
- * ifconfig.  At this point we advertise our MAC address to the rest of the
- * network, and register receive buffers ready for incoming packets. */
-static int lguestnet_open(struct net_device *dev)
-{
-	int i;
-	struct lguestnet_info *info = netdev_priv(dev);
-
-	/* Copy our MAC address into the device page, so others on the network
-	 * can find us. */
-	memcpy(info->peer[info->me].mac, dev->dev_addr, ETH_ALEN);
-
-	/* We might already be in promisc mode (dev->flags & IFF_PROMISC).  Our
-	 * set_multicast callback handles this already, so we call it now. */
-	lguestnet_set_multicast(dev);
-
-	/* Allocate packets and put them into our "struct lguest_dma" array.
-	 * If we fail to allocate all the packets we could still limp along,
-	 * but it's a sign of real stress so we should probably give up now. */
-	for (i = 0; i < ARRAY_SIZE(info->dma); i++) {
-		if (fill_slot(dev, i) != 0)
-			goto cleanup;
-	}
-
-	/* Finally we tell the Host where our array of "struct lguest_dma"
-	 * receive buffers is, binding it to the key corresponding to the
-	 * device's physical memory plus our peerid. */
-	if (lguest_bind_dma(peer_key(info,info->me), info->dma,
-			    NUM_SKBS, lgdev_irq(info->lgdev)) != 0)
-		goto cleanup;
-	return 0;
-
-cleanup:
-	while (--i >= 0)
-		dev_kfree_skb(info->skb[i]);
-	return -ENOMEM;
-}
-/*:*/
-
-/* The close routine is called when the device is no longer in use: we clean up
- * elegantly. */
-static int lguestnet_close(struct net_device *dev)
-{
-	unsigned int i;
-	struct lguestnet_info *info = netdev_priv(dev);
-
-	/* Clear all trace of our existence out of the device memory by setting
-	 * the slot which held our MAC address to 0 (unused). */
-	memset(&info->peer[info->me], 0, sizeof(info->peer[info->me]));
-
-	/* Unregister our array of receive buffers */
-	lguest_unbind_dma(peer_key(info, info->me), info->dma);
-	for (i = 0; i < ARRAY_SIZE(info->dma); i++)
-		dev_kfree_skb(info->skb[i]);
-	return 0;
-}
-
-/*D:510 The network device probe function is basically a standard ethernet
- * device setup.  It reads the "struct lguest_device_desc" and sets the "struct
- * net_device".  Oh, the line-by-line excitement!  Let's skip over it. :*/
-static int lguestnet_probe(struct lguest_device *lgdev)
-{
-	int err, irqf = IRQF_SHARED;
-	struct net_device *dev;
-	struct lguestnet_info *info;
-	struct lguest_device_desc *desc = &lguest_devices[lgdev->index];
-
-	pr_debug("lguest_net: probing for device %i\n", lgdev->index);
-
-	dev = alloc_etherdev(sizeof(struct lguestnet_info));
-	if (!dev)
-		return -ENOMEM;
-
-	/* Ethernet defaults with some changes */
-	ether_setup(dev);
-	dev->set_mac_address = NULL;
-	random_ether_addr(dev->dev_addr);
-
-	dev->open = lguestnet_open;
-	dev->stop = lguestnet_close;
-	dev->hard_start_xmit = lguestnet_start_xmit;
-
-	/* We don't actually support multicast yet, but turning on/off
-	 * promisc also calls dev->set_multicast_list. */
-	dev->set_multicast_list = lguestnet_set_multicast;
-	SET_NETDEV_DEV(dev, &lgdev->dev);
-
-	/* The network code complains if you have "scatter-gather" capability
-	 * if you don't also handle checksums (it seem that would be
-	 * "illogical").  So we use a lie of omission and don't tell it that we
-	 * can handle scattered packets unless we also don't want checksums,
-	 * even though to us they're completely independent. */
-	if (desc->features & LGUEST_NET_F_NOCSUM)
-		dev->features = NETIF_F_SG|NETIF_F_NO_CSUM;
-
-	info = netdev_priv(dev);
-	info->mapsize = PAGE_SIZE * desc->num_pages;
-	info->peer_phys = ((unsigned long)desc->pfn << PAGE_SHIFT);
-	info->lgdev = lgdev;
-	info->peer = lguest_map(info->peer_phys, desc->num_pages);
-	if (!info->peer) {
-		err = -ENOMEM;
-		goto free;
-	}
-
-	/* This stores our peerid (upper bits reserved for future). */
-	info->me = (desc->features & (info->mapsize-1));
-
-	err = register_netdev(dev);
-	if (err) {
-		pr_debug("lguestnet: registering device failed\n");
-		goto unmap;
-	}
-
-	if (lguest_devices[lgdev->index].features & LGUEST_DEVICE_F_RANDOMNESS)
-		irqf |= IRQF_SAMPLE_RANDOM;
-	if (request_irq(lgdev_irq(lgdev), lguestnet_rcv, irqf, "lguestnet",
-			dev) != 0) {
-		pr_debug("lguestnet: cannot get irq %i\n", lgdev_irq(lgdev));
-		goto unregister;
-	}
-
-	pr_debug("lguestnet: registered device %s\n", dev->name);
-	/* Finally, we put the "struct net_device" in the generic "struct
-	 * lguest_device"s private pointer.  Again, it's not necessary, but
-	 * makes sure the cool kernel kids don't tease us. */
-	lgdev->private = dev;
-	return 0;
-
-unregister:
-	unregister_netdev(dev);
-unmap:
-	lguest_unmap(info->peer);
-free:
-	free_netdev(dev);
-	return err;
-}
-
-static struct lguest_driver lguestnet_drv = {
-	.name = "lguestnet",
-	.owner = THIS_MODULE,
-	.device_type = LGUEST_DEVICE_T_NET,
-	.probe = lguestnet_probe,
-};
-
-static __init int lguestnet_init(void)
-{
-	return register_lguest_driver(&lguestnet_drv);
-}
-module_init(lguestnet_init);
-
-MODULE_DESCRIPTION("Lguest network driver");
-MODULE_LICENSE("GPL");
-
-/*D:580
- * This is the last of the Drivers, and with this we have covered the many and
- * wonderous and fine (and boring) details of the Guest.
- *
- * "make Launcher" beckons, where we answer questions like "Where do Guests
- * come from?", and "What do you do when someone asks for optimization?"
- */