diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-08-04 16:37:08 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-08-04 16:37:08 -0700 |
| commit | 62d1716304d1bb35ad9cdafe40efbbb6b3981cfe (patch) | |
| tree | 0a650e85338c02b10502e72ae251237e73e26639 /drivers | |
| parent | 4b6f23161b4e888e72671e377c32eabe9a8e62fc (diff) | |
| parent | 2b372a9685a757a1d3ab30615ef42b2db7c45298 (diff) | |
| download | linux-62d1716304d1bb35ad9cdafe40efbbb6b3981cfe.tar.bz2 | |
Merge tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"NAND:
- Fix Micron driver as some chips enable internal ECC correction
during their discovery while they advertize they do not have any.
Hyperbus:
- Restrict the build to only ARM64 SoCs (and compile testing) which
is what should have been done since the beginning.
- Fix Kconfig issue by selection something instead of implying it"
* tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: hyperbus: Add hardware dependency to AM654 driver
mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies
mtd: rawnand: micron: handle on-die "ECC-off" devices correctly
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/hyperbus/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/nand_micron.c | 14 |
2 files changed, 13 insertions, 4 deletions
diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig index cff6bbd226f5..b4e3caf7d799 100644 --- a/drivers/mtd/hyperbus/Kconfig +++ b/drivers/mtd/hyperbus/Kconfig @@ -14,8 +14,9 @@ if MTD_HYPERBUS config HBMC_AM654 tristate "HyperBus controller driver for AM65x SoC" + depends on ARM64 || COMPILE_TEST select MULTIPLEXER - select MUX_MMIO + imply MUX_MMIO help This is the driver for HyperBus controller on TI's AM65x and other SoCs diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c index 1622d3145587..8ca9fad6e6ad 100644 --- a/drivers/mtd/nand/raw/nand_micron.c +++ b/drivers/mtd/nand/raw/nand_micron.c @@ -390,6 +390,14 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip) (chip->id.data[4] & MICRON_ID_INTERNAL_ECC_MASK) != 0x2) return MICRON_ON_DIE_UNSUPPORTED; + /* + * It seems that there are devices which do not support ECC officially. + * At least the MT29F2G08ABAGA / MT29F2G08ABBGA devices supports + * enabling the ECC feature but don't reflect that to the READ_ID table. + * So we have to guarantee that we disable the ECC feature directly + * after we did the READ_ID table command. Later we can evaluate the + * ECC_ENABLE support. + */ ret = micron_nand_on_die_ecc_setup(chip, true); if (ret) return MICRON_ON_DIE_UNSUPPORTED; @@ -398,13 +406,13 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip) if (ret) return MICRON_ON_DIE_UNSUPPORTED; - if (!(id[4] & MICRON_ID_ECC_ENABLED)) - return MICRON_ON_DIE_UNSUPPORTED; - ret = micron_nand_on_die_ecc_setup(chip, false); if (ret) return MICRON_ON_DIE_UNSUPPORTED; + if (!(id[4] & MICRON_ID_ECC_ENABLED)) + return MICRON_ON_DIE_UNSUPPORTED; + ret = nand_readid_op(chip, 0, id, sizeof(id)); if (ret) return MICRON_ON_DIE_UNSUPPORTED; |