diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-15 15:48:30 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-15 15:48:30 -0800 |
| commit | 2dda5700ef6af806e0358f63d81eb436a0d280fa (patch) | |
| tree | c95ca01f50a4d0c3b3c110bb27a1720d7fa2e5ad /drivers | |
| parent | a45f1d43311d3a4f6534e48a3655ba3247a59d48 (diff) | |
| parent | 5e999f10a16b90fc1d5ded8aa365e9804e894aa9 (diff) | |
| download | linux-2dda5700ef6af806e0358f63d81eb436a0d280fa.tar.bz2 | |
Merge tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a quiet release for the regulator API, a few new drivers
and the usual fixes and cleanup traffic but not much else going on:
- Optimisations for the handling of voltage enumeration, especially
with sparse selector sets, from Claudiu Beznea.
- Support for several ARM SCMI regulators, Dialog DA9121, NXP PF8x00,
Qualcomm PMX55, PM8350 and PM8350c
The addition of the SCMI regulator driver (which controls regulators
via system firmware) means that we've pulled in the support for the
underlying firmware operations from the firmware tree"
* tag 'regulator-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (53 commits)
regulator: mc13892-regulator: convert comma to semicolon
regulator: pfuze100: Convert the driver to DT-only
regulator: max14577: Add proper module aliases strings
regulator: da9121: Potential Oops in da9121_assign_chip_model()
regulator: da9121: Fix index used for DT property
regulator: da9121: Remove uninitialised string variable
regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22x
regulator: qcom-rpmh: Add support for PM8350/PM8350c
regulator: dt-bindings: Add PM8350x compatibles
regulator: da9121: include linux/gpio/consumer.h
regulator: da9121: Mark some symbols with static keyword
regulator: da9121: Request IRQ directly and free in release function to avoid masking race
regulator: da9121: add interrupt support
regulator: da9121: add mode support
regulator: da9121: add current support
regulator: da9121: Update registration to support multiple buck variants
regulator: da9121: Add support for device variants via devicetree
regulator: da9121: Add device variant descriptors
regulator: da9121: Add device variant regmaps
regulator: da9121: Add device variants
...
Diffstat (limited to 'drivers')
23 files changed, 3158 insertions, 77 deletions
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile index bc0d54f8e861..6a2ef63306d6 100644 --- a/drivers/firmware/arm_scmi/Makefile +++ b/drivers/firmware/arm_scmi/Makefile @@ -4,7 +4,7 @@ scmi-driver-y = driver.o notify.o scmi-transport-y = shmem.o scmi-transport-$(CONFIG_MAILBOX) += mailbox.o scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o -scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o +scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \ $(scmi-transport-y) obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h index 65063fa948d4..c0fb45e7c3e8 100644 --- a/drivers/firmware/arm_scmi/common.h +++ b/drivers/firmware/arm_scmi/common.h @@ -169,6 +169,7 @@ DECLARE_SCMI_REGISTER_UNREGISTER(perf); DECLARE_SCMI_REGISTER_UNREGISTER(power); DECLARE_SCMI_REGISTER_UNREGISTER(reset); DECLARE_SCMI_REGISTER_UNREGISTER(sensors); +DECLARE_SCMI_REGISTER_UNREGISTER(voltage); DECLARE_SCMI_REGISTER_UNREGISTER(system); #define DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(id, name) \ diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index 3dfd8b6a0ebf..5392e1fc6b4e 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -743,6 +743,7 @@ static struct scmi_prot_devnames devnames[] = { { SCMI_PROTOCOL_CLOCK, { "clocks" },}, { SCMI_PROTOCOL_SENSOR, { "hwmon" },}, { SCMI_PROTOCOL_RESET, { "reset" },}, + { SCMI_PROTOCOL_VOLTAGE, { "regulator" },}, }; static inline void @@ -946,6 +947,7 @@ static int __init scmi_driver_init(void) scmi_power_register(); scmi_reset_register(); scmi_sensors_register(); + scmi_voltage_register(); scmi_system_register(); return platform_driver_register(&scmi_driver); @@ -961,6 +963,7 @@ static void __exit scmi_driver_exit(void) scmi_power_unregister(); scmi_reset_unregister(); scmi_sensors_unregister(); + scmi_voltage_unregister(); scmi_system_unregister(); platform_driver_unregister(&scmi_driver); diff --git a/drivers/firmware/arm_scmi/voltage.c b/drivers/firmware/arm_scmi/voltage.c new file mode 100644 index 000000000000..e794e4349ae6 --- /dev/null +++ b/drivers/firmware/arm_scmi/voltage.c @@ -0,0 +1,380 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * System Control and Management Interface (SCMI) Voltage Protocol + * + * Copyright (C) 2020 ARM Ltd. + */ + +#include <linux/scmi_protocol.h> + +#include "common.h" + +#define VOLTAGE_DOMS_NUM_MASK GENMASK(15, 0) +#define REMAINING_LEVELS_MASK GENMASK(31, 16) +#define RETURNED_LEVELS_MASK GENMASK(11, 0) + +enum scmi_voltage_protocol_cmd { + VOLTAGE_DOMAIN_ATTRIBUTES = 0x3, + VOLTAGE_DESCRIBE_LEVELS = 0x4, + VOLTAGE_CONFIG_SET = 0x5, + VOLTAGE_CONFIG_GET = 0x6, + VOLTAGE_LEVEL_SET = 0x7, + VOLTAGE_LEVEL_GET = 0x8, +}; + +#define NUM_VOLTAGE_DOMAINS(x) ((u16)(FIELD_GET(VOLTAGE_DOMS_NUM_MASK, (x)))) + +struct scmi_msg_resp_domain_attributes { + __le32 attr; + u8 name[SCMI_MAX_STR_SIZE]; +}; + +struct scmi_msg_cmd_describe_levels { + __le32 domain_id; + __le32 level_index; +}; + +struct scmi_msg_resp_describe_levels { + __le32 flags; +#define NUM_REMAINING_LEVELS(f) ((u16)(FIELD_GET(REMAINING_LEVELS_MASK, (f)))) +#define NUM_RETURNED_LEVELS(f) ((u16)(FIELD_GET(RETURNED_LEVELS_MASK, (f)))) +#define SUPPORTS_SEGMENTED_LEVELS(f) ((f) & BIT(12)) + __le32 voltage[]; +}; + +struct scmi_msg_cmd_config_set { + __le32 domain_id; + __le32 config; +}; + +struct scmi_msg_cmd_level_set { + __le32 domain_id; + __le32 flags; + __le32 voltage_level; +}; + +struct voltage_info { + unsigned int version; + unsigned int num_domains; + struct scmi_voltage_info *domains; +}; + +static int scmi_protocol_attributes_get(const struct scmi_handle *handle, + struct voltage_info *vinfo) +{ + int ret; + struct scmi_xfer *t; + + ret = scmi_xfer_get_init(handle, PROTOCOL_ATTRIBUTES, + SCMI_PROTOCOL_VOLTAGE, 0, sizeof(__le32), &t); + if (ret) + return ret; + + ret = scmi_do_xfer(handle, t); + if (!ret) + vinfo->num_domains = + NUM_VOLTAGE_DOMAINS(get_unaligned_le32(t->rx.buf)); + + scmi_xfer_put(handle, t); + return ret; +} + +static int scmi_init_voltage_levels(struct device *dev, + struct scmi_voltage_info *v, + u32 num_returned, u32 num_remaining, + bool segmented) +{ + u32 num_levels; + + num_levels = num_returned + num_remaining; + /* + * segmented levels entries are represented by a single triplet + * returned all in one go. + */ + if (!num_levels || + (segmented && (num_remaining || num_returned != 3))) { + dev_err(dev, + "Invalid level descriptor(%d/%d/%d) for voltage dom %d\n", + num_levels, num_returned, num_remaining, v->id); + return -EINVAL; + } + + v->levels_uv = devm_kcalloc(dev, num_levels, sizeof(u32), GFP_KERNEL); + if (!v->levels_uv) + return -ENOMEM; + + v->num_levels = num_levels; + v->segmented = segmented; + + return 0; +} + +static int scmi_voltage_descriptors_get(const struct scmi_handle *handle, + struct voltage_info *vinfo) +{ + int ret, dom; + struct scmi_xfer *td, *tl; + struct device *dev = handle->dev; + struct scmi_msg_resp_domain_attributes *resp_dom; + struct scmi_msg_resp_describe_levels *resp_levels; + + ret = scmi_xfer_get_init(handle, VOLTAGE_DOMAIN_ATTRIBUTES, + SCMI_PROTOCOL_VOLTAGE, sizeof(__le32), + sizeof(*resp_dom), &td); + if (ret) + return ret; + resp_dom = td->rx.buf; + + ret = scmi_xfer_get_init(handle, VOLTAGE_DESCRIBE_LEVELS, + SCMI_PROTOCOL_VOLTAGE, sizeof(__le64), 0, &tl); + if (ret) + goto outd; + resp_levels = tl->rx.buf; + + for (dom = 0; dom < vinfo->num_domains; dom++) { + u32 desc_index = 0; + u16 num_returned = 0, num_remaining = 0; + struct scmi_msg_cmd_describe_levels *cmd; + struct scmi_voltage_info *v; + + /* Retrieve domain attributes at first ... */ + put_unaligned_le32(dom, td->tx.buf); + ret = scmi_do_xfer(handle, td); + /* Skip domain on comms error */ + if (ret) + continue; + + v = vinfo->domains + dom; + v->id = dom; + v->attributes = le32_to_cpu(resp_dom->attr); + strlcpy(v->name, resp_dom->name, SCMI_MAX_STR_SIZE); + + cmd = tl->tx.buf; + /* ...then retrieve domain levels descriptions */ + do { + u32 flags; + int cnt; + + cmd->domain_id = cpu_to_le32(v->id); + cmd->level_index = desc_index; + ret = scmi_do_xfer(handle, tl); + if (ret) + break; + + flags = le32_to_cpu(resp_levels->flags); + num_returned = NUM_RETURNED_LEVELS(flags); + num_remaining = NUM_REMAINING_LEVELS(flags); + + /* Allocate space for num_levels if not already done */ + if (!v->num_levels) { + ret = scmi_init_voltage_levels(dev, v, + num_returned, + num_remaining, + SUPPORTS_SEGMENTED_LEVELS(flags)); + if (ret) + break; + } + + if (desc_index + num_returned > v->num_levels) { + dev_err(handle->dev, + "No. of voltage levels can't exceed %d\n", + v->num_levels); + ret = -EINVAL; + break; + } + + for (cnt = 0; cnt < num_returned; cnt++) { + s32 val; + + val = + (s32)le32_to_cpu(resp_levels->voltage[cnt]); + v->levels_uv[desc_index + cnt] = val; + if (val < 0) + v->negative_volts_allowed = true; + } + + desc_index += num_returned; + + scmi_reset_rx_to_maxsz(handle, tl); + /* check both to avoid infinite loop due to buggy fw */ + } while (num_returned && num_remaining); + + if (ret) { + v->num_levels = 0; + devm_kfree(dev, v->levels_uv); + } + + scmi_reset_rx_to_maxsz(handle, td); + } + + scmi_xfer_put(handle, tl); +outd: + scmi_xfer_put(handle, td); + + return ret; +} + +static int __scmi_voltage_get_u32(const struct scmi_handle *handle, + u8 cmd_id, u32 domain_id, u32 *value) +{ + int ret; + struct scmi_xfer *t; + struct voltage_info *vinfo = handle->voltage_priv; + + if (domain_id >= vinfo->num_domains) + return -EINVAL; + + ret = scmi_xfer_get_init(handle, cmd_id, + SCMI_PROTOCOL_VOLTAGE, + sizeof(__le32), 0, &t); + if (ret) + return ret; + + put_unaligned_le32(domain_id, t->tx.buf); + ret = scmi_do_xfer(handle, t); + if (!ret) + *value = get_unaligned_le32(t->rx.buf); + + scmi_xfer_put(handle, t); + return ret; +} + +static int scmi_voltage_config_set(const struct scmi_handle *handle, + u32 domain_id, u32 config) +{ + int ret; + struct scmi_xfer *t; + struct voltage_info *vinfo = handle->voltage_priv; + struct scmi_msg_cmd_config_set *cmd; + + if (domain_id >= vinfo->num_domains) + return -EINVAL; + + ret = scmi_xfer_get_init(handle, VOLTAGE_CONFIG_SET, + SCMI_PROTOCOL_VOLTAGE, + sizeof(*cmd), 0, &t); + if (ret) + return ret; + + cmd = t->tx.buf; + cmd->domain_id = cpu_to_le32(domain_id); + cmd->config = cpu_to_le32(config & GENMASK(3, 0)); + + ret = scmi_do_xfer(handle, t); + + scmi_xfer_put(handle, t); + return ret; +} + +static int scmi_voltage_config_get(const struct scmi_handle *handle, + u32 domain_id, u32 *config) +{ + return __scmi_voltage_get_u32(handle, VOLTAGE_CONFIG_GET, + domain_id, config); +} + +static int scmi_voltage_level_set(const struct scmi_handle *handle, + u32 domain_id, u32 flags, s32 volt_uV) +{ + int ret; + struct scmi_xfer *t; + struct voltage_info *vinfo = handle->voltage_priv; + struct scmi_msg_cmd_level_set *cmd; + + if (domain_id >= vinfo->num_domains) + return -EINVAL; + + ret = scmi_xfer_get_init(handle, VOLTAGE_LEVEL_SET, + SCMI_PROTOCOL_VOLTAGE, + sizeof(*cmd), 0, &t); + if (ret) + return ret; + + cmd = t->tx.buf; + cmd->domain_id = cpu_to_le32(domain_id); + cmd->flags = cpu_to_le32(flags); + cmd->voltage_level = cpu_to_le32(volt_uV); + + ret = scmi_do_xfer(handle, t); + + scmi_xfer_put(handle, t); + return ret; +} + +static int scmi_voltage_level_get(const struct scmi_handle *handle, + u32 domain_id, s32 *volt_uV) +{ + return __scmi_voltage_get_u32(handle, VOLTAGE_LEVEL_GET, + domain_id, (u32 *)volt_uV); +} + +static const struct scmi_voltage_info * __must_check +scmi_voltage_info_get(const struct scmi_handle *handle, u32 domain_id) +{ + struct voltage_info *vinfo = handle->voltage_priv; + + if (domain_id >= vinfo->num_domains || + !vinfo->domains[domain_id].num_levels) + return NULL; + + return vinfo->domains + domain_id; +} + +static int scmi_voltage_domains_num_get(const struct scmi_handle *handle) +{ + struct voltage_info *vinfo = handle->voltage_priv; + + return vinfo->num_domains; +} + +static struct scmi_voltage_ops voltage_ops = { + .num_domains_get = scmi_voltage_domains_num_get, + .info_get = scmi_voltage_info_get, + .config_set = scmi_voltage_config_set, + .config_get = scmi_voltage_config_get, + .level_set = scmi_voltage_level_set, + .level_get = scmi_voltage_level_get, +}; + +static int scmi_voltage_protocol_init(struct scmi_handle *handle) +{ + int ret; + u32 version; + struct voltage_info *vinfo; + + ret = scmi_version_get(handle, SCMI_PROTOCOL_VOLTAGE, &version); + if (ret) + return ret; + + dev_dbg(handle->dev, "Voltage Version %d.%d\n", + PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version)); + + vinfo = devm_kzalloc(handle->dev, sizeof(*vinfo), GFP_KERNEL); + if (!vinfo) + return -ENOMEM; + vinfo->version = version; + + ret = scmi_protocol_attributes_get(handle, vinfo); + if (ret) + return ret; + + if (vinfo->num_domains) { + vinfo->domains = devm_kcalloc(handle->dev, vinfo->num_domains, + sizeof(*vinfo->domains), + GFP_KERNEL); + if (!vinfo->domains) + return -ENOMEM; + ret = scmi_voltage_descriptors_get(handle, vinfo); + if (ret) + return ret; + } else { + dev_warn(handle->dev, "No Voltage domains found.\n"); + } + + handle->voltage_ops = &voltage_ops; + handle->voltage_priv = vinfo; + + return 0; +} + +DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(SCMI_PROTOCOL_VOLTAGE, voltage) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 020a00d6696b..53fa84f4d1e1 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -155,6 +155,15 @@ config REGULATOR_ARIZONA_MICSUPP and Wolfson Microelectronic Arizona codecs devices. +config REGULATOR_ARM_SCMI + tristate "SCMI based regulator driver" + depends on ARM_SCMI_PROTOCOL && OF + help + This adds the regulator driver support for ARM platforms using SCMI + protocol for device voltage management. + This driver uses SCMI Message Protocol driver to interact with the + firmware providing the device Voltage functionality. + config REGULATOR_AS3711 tristate "AS3711 PMIC" depends on MFD_AS3711 @@ -303,6 +312,26 @@ config REGULATOR_DA9063 This driver can also be built as a module. If so, the module will be called da9063-regulator. +config REGULATOR_DA9121 + tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support for the Dialog Semiconductor DA9121. The + DA9121 is a single channel dual-phase buck converter controlled + through an I2C interface. + + DA9121 Single-channel dual-phase 10A buck converter + DA9130 Single-channel dual-phase 10A buck converter (Automotive) + DA9217 Single-channel dual-phase 6A buck converter + DA9122 Dual-channel single-phase 5A buck converter + DA9131 Dual-channel single-phase 5A buck converter (Automotive) + DA9220 Dual-channel single-phase 3A buck converter + DA9132 Dual-channel single-phase 3A buck converter (Automotive) + + This driver can also be built as a module. If so, the module + will be called da9121-regulator. + config REGULATOR_DA9210 tristate "Dialog Semiconductor DA9210 regulator" depends on I2C @@ -791,9 +820,17 @@ config REGULATOR_PCF50633 Say Y here to support the voltage regulators and converters on PCF50633 +config REGULATOR_PF8X00 + tristate "NXP PF8100/PF8121A/PF8200 regulator driver" + depends on I2C && OF + select REGMAP_I2C + help + Say y here to support the regulators found on the NXP + PF8100/PF8121A/PF8200 PMIC. + config REGULATOR_PFUZE100 tristate "Freescale PFUZE100/200/3000/3001 regulator driver" - depends on I2C + depends on I2C && OF select REGMAP_I2C help Say y here to support the regulators found on the Freescale @@ -843,7 +880,7 @@ config REGULATOR_QCOM_RPM config REGULATOR_QCOM_RPMH tristate "Qualcomm Technologies, Inc. RPMh regulator driver" - depends on QCOM_RPMH || COMPILE_TEST + depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST) help This driver supports control of PMIC regulators via the RPMh hardware block found on Qualcomm Technologies Inc. SoCs. RPMh regulator diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 6ebae516258e..680e539f6579 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA_LDO1) += arizona-ldo1.o obj-$(CONFIG_REGULATOR_ARIZONA_MICSUPP) += arizona-micsupp.o +obj-$(CONFIG_REGULATOR_ARM_SCMI) += scmi-regulator.o obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o @@ -38,6 +39,7 @@ obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o obj-$(CONFIG_REGULATOR_DA9062) += da9062-regulator.o obj-$(CONFIG_REGULATOR_DA9063) += da9063-regulator.o +obj-$(CONFIG_REGULATOR_DA9121) += da9121-regulator.o obj-$(CONFIG_REGULATOR_DA9210) += da9210-regulator.o obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o @@ -100,6 +102,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o +obj-$(CONFIG_REGULATOR_PF8X00) += pf8x00-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o obj-$(CONFIG_REGULATOR_PV88080) += pv88080-regulator.o diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c index 33ca197860b3..7bebf9ce6271 100644 --- a/drivers/regulator/as3722-regulator.c +++ b/drivers/regulator/as3722-regulator.c @@ -455,7 +455,8 @@ static int as3722_sd_set_mode(struct regulator_dev *rdev, switch (mode) { case REGULATOR_MODE_FAST: val = as3722_reg_lookup[id].mode_mask; - case REGULATOR_MODE_NORMAL: /* fall down */ + fallthrough; + case REGULATOR_MODE_NORMAL: break; default: return -EINVAL; diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index cd1224182ad7..90cb8445f721 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -594,7 +594,7 @@ static const struct regulator_desc axp22x_regulators[] = { AXP22X_DLDO1_V_OUT, AXP22X_DLDO1_V_OUT_MASK, AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO1_MASK), AXP_DESC(AXP22X, DLDO2, "dldo2", "dldoin", 700, 3300, 100, - AXP22X_DLDO2_V_OUT, AXP22X_PWR_OUT_DLDO2_MASK, + AXP22X_DLDO2_V_OUT, AXP22X_DLDO2_V_OUT_MASK, AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DLDO2_MASK), AXP_DESC(AXP22X, DLDO3, "dldo3", "dldoin", 700, 3300, 100, AXP22X_DLDO3_V_OUT, AXP22X_DLDO3_V_OUT_MASK, diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index 0774467994fb..e6d5d98c3cea 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -1323,13 +1323,142 @@ static void mark_hw_controlled(struct device *dev, struct device_node *np, dev_warn(dev, "Bad regulator node\n"); } -static int get_hw_controlled_regulators(struct device *dev, - struct bd718xx_regulator_data *reg_data, - unsigned int num_reg_data, int *info) +/* + * Setups where regulator (especially the buck8) output voltage is scaled + * by adding external connection where some other regulator output is connected + * to feedback-pin (over suitable resistors) is getting popular amongst users + * of BD71837. (This allows for example scaling down the buck8 voltages to suit + * lover GPU voltages for projects where buck8 is (ab)used to supply power + * for GPU. Additionally some setups do allow DVS for buck8 but as this do + * produce voltage spikes the HW must be evaluated to be able to survive this + * - hence I keep the DVS disabled for non DVS bucks by default. I don't want + * to help you burn your proto board) + * + * So we allow describing this external connection from DT and scale the + * voltages accordingly. This is what the connection should look like: + * + * |------------| + * | buck 8 |-------+----->Vout + * | | | + * |------------| | + * | FB pin | + * | | + * +-------+--R2---+ + * | + * R1 + * | + * V FB-pull-up + * + * Here the buck output is sifted according to formula: + * + * Vout_o = Vo - (Vpu - Vo)*R2/R1 + * Linear_step = step_orig*(R1+R2)/R1 + * + * where: + * Vout_o is adjusted voltage output at vsel reg value 0 + * Vo is original voltage output at vsel reg value 0 + * Vpu is the pull-up voltage V FB-pull-up in the picture + * R1 and R2 are resistor values. + * + * As a real world example for buck8 and a specific GPU: + * VLDO = 1.6V (used as FB-pull-up) + * R1 = 1000ohms + * R2 = 150ohms + * VSEL 0x0 => 0.8V – (VLDO – 0.8) * R2 / R1 = 0.68V + * Linear Step = 10mV * (R1 + R2) / R1 = 11.5mV + */ +static int setup_feedback_loop(struct device *dev, struct device_node *np, + struct bd718xx_regulator_data *reg_data, + unsigned int num_reg_data, int fb_uv) { + int i, r1, r2, ret; + + /* + * We do adjust the values in the global desc based on DT settings. + * This may not be best approach as it can cause problems if more than + * one PMIC is controlled from same processor. I don't see such use-case + * for BD718x7 now - so we spare some bits. + * + * If this will point out to be a problem - then we can allocate new + * bd718xx_regulator_data array at probe and just use the global + * array as a template where we copy initial values. Then we can + * use allocated descs for regultor registration and do IC specific + * modifications to this copy while leaving other PMICs untouched. But + * that means allocating new array for each PMIC - and currently I see + * no need for that. + */ + + for (i = 0; i < num_reg_data; i++) { + struct regulator_desc *desc = ®_data[i].desc; + int j; + + if (!of_node_name_eq(np, desc->of_match)) + continue; + + pr_info("Looking at node '%s'\n", desc->of_match); + + /* The feedback loop connection does not make sense for LDOs */ + if (desc->id >= BD718XX_LDO1) + return -EINVAL; + + ret = of_property_read_u32(np, "rohm,feedback-pull-up-r1-ohms", + &r1); + if (ret) + return ret; + + if (!r1) + return -EINVAL; + + ret = of_property_read_u32(np, "rohm,feedback-pull-up-r2-ohms", + &r2); + if (ret) + return ret; + + if (desc->n_linear_ranges && desc->linear_ranges) { + struct linear_range *new; + + new = devm_kzalloc(dev, desc->n_linear_ranges * + sizeof(struct linear_range), + GFP_KERNEL); + if (!new) + return -ENOMEM; + + for (j = 0; j < desc->n_linear_ranges; j++) { + int min = desc->linear_ranges[j].min; + int step = desc->linear_ranges[j].step; + + min -= (fb_uv - min)*r2/r1; + step = step * (r1 + r2); + step /= r1; + + new[j].min = min; + new[j].step = step; + + dev_dbg(dev, "%s: old range min %d, step %d\n", + desc->name, desc->linear_ranges[j].min, + desc->linear_ranges[j].step); + dev_dbg(dev, "new range min %d, step %d\n", min, + step); + } + desc->linear_ranges = new; + } + dev_dbg(dev, "regulator '%s' has FB pull-up configured\n", + desc->name); + + return 0; + } + + return -ENODEV; +} + +static int get_special_regulators(struct device *dev, + struct bd718xx_regulator_data *reg_data, + unsigned int num_reg_data, int *info) +{ + int ret; struct device_node *np; struct device_node *nproot = dev->of_node; - const char *prop = "rohm,no-regulator-enable-control"; + int uv; *info = 0; @@ -1338,13 +1467,32 @@ static int get_hw_controlled_regulators(struct device *dev, dev_err(dev, "failed to find regulators node\n"); return -ENODEV; } - for_each_child_of_node(nproot, np) - if (of_property_read_bool(np, prop)) + for_each_child_of_node(nproot, np) { + if (of_property_read_bool(np, "rohm,no-regulator-enable-control")) mark_hw_controlled(dev, np, reg_data, num_reg_data, info); + ret = of_property_read_u32(np, "rohm,fb-pull-up-microvolt", + &uv); + if (ret) { + if (ret == -EINVAL) + continue; + else + goto err_out; + } + + ret = setup_feedback_loop(dev, np, reg_data, num_reg_data, uv); + if (ret) + goto err_out; + } of_node_put(nproot); return 0; + +err_out: + of_node_put(np); + of_node_put(nproot); + + return ret; } static int bd718xx_probe(struct platform_device *pdev) @@ -1432,8 +1580,10 @@ static int bd718xx_probe(struct platform_device *pdev) * be affected by PMIC state machine - Eg. regulator is likely to stay * on even in SUSPEND */ - get_hw_controlled_regulators(pdev->dev.parent, reg_data, num_reg_data, + err = get_special_regulators(pdev->dev.parent, reg_data, num_reg_data, &omit_enable); + if (err) + return err; for (i = 0; i < num_reg_data; i++) { diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 42bbd99a36ac..ca03d8e70bd1 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2958,6 +2958,8 @@ static int _regulator_list_voltage(struct regulator_dev *rdev, if (ops->list_voltage) { if (selector >= rdev->desc->n_voltages) return -EINVAL; + if (selector < rdev->desc->linear_min_sel) + return 0; if (lock) regulator_lock(rdev); ret = ops->list_voltage(rdev, selector); @@ -3109,6 +3111,8 @@ int regulator_list_hardware_vsel(struct regulator *regulator, if (selector >= rdev->desc->n_voltages) return -EINVAL; + if (selector < rdev->desc->linear_min_sel) + return 0; if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) return -EOPNOTSUPP; @@ -4030,6 +4034,12 @@ int regulator_set_voltage_time(struct regulator *regulator, for (i = 0; i < rdev->desc->n_voltages; i++) { /* We only look for exact voltage matches here */ + if (i < rdev->desc->linear_min_sel) + continue; + + if (old_sel >= 0 && new_sel >= 0) + break; + voltage = regulator_list_voltage(regulator, i); if (voltage < 0) return -EINVAL; @@ -5305,6 +5315,8 @@ regulator_register(const struct regulator_desc *regulator_desc, /* FIXME: this currently triggers a chicken-and-egg problem * when creating -SUPPLY symlink in sysfs to a regulator * that is just being created */ + rdev_dbg(rdev, "will resolve supply early: %s\n", + rdev->supply_name); ret = regulator_resolve_supply(rdev); if (!ret) ret = set_machine_constraints(rdev); @@ -5537,7 +5549,7 @@ void regulator_set_drvdata(struct regulator *regulator, void *data) EXPORT_SYMBOL_GPL(regulator_set_drvdata); /** - * regulator_get_id - get regulator ID + * rdev_get_id - get regulator ID * @rdev: regulator */ int rdev_get_id(struct regulator_dev *rdev) diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c new file mode 100644 index 000000000000..a2ede7d7897e --- /dev/null +++ b/drivers/regulator/da9121-regulator.c @@ -0,0 +1,1075 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// DA9121 Single-channel dual-phase 10A buck converter +// +// Copyright (C) 2020 Axis Communications AB +// +// DA9130 Single-channel dual-phase 10A buck converter (Automotive) +// DA9217 Single-channel dual-phase 6A buck converter +// DA9122 Dual-channel single-phase 5A buck converter +// DA9131 Dual-channel single-phase 5A buck converter (Automotive) +// DA9220 Dual-channel single-phase 3A buck converter +// DA9132 Dual-channel single-phase 3A buck converter (Automotive) +// +// Copyright (C) 2020 Dialog Semiconductor + +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/regulator/of_regulator.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/driver.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/regulator/da9121.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> + +#include "da9121-regulator.h" + +/* Chip data */ +struct da9121 { + struct device *dev; + struct delayed_work work; + struct da9121_pdata *pdata; + struct regmap *regmap; + struct regulator_dev *rdev[DA9121_IDX_MAX]; + unsigned int persistent[2]; + unsigned int passive_delay; + int chip_irq; + int variant_id; +}; + +/* Define ranges for different variants, enabling translation to/from + * registers. Maximums give scope to allow for transients. + */ +struct da9121_range { + int val_min; + int val_max; + int val_stp; + int reg_min; + int reg_max; +}; + +static struct da9121_range da9121_10A_2phase_current = { + .val_min = 7000000, + .val_max = 20000000, + .val_stp = 1000000, + .reg_min = 1, + .reg_max = 14, +}; + +static struct da9121_range da9121_6A_2phase_current = { + .val_min = 7000000, + .val_max = 12000000, + .val_stp = 1000000, + .reg_min = 1, + .reg_max = 6, +}; + +static struct da9121_range da9121_5A_1phase_current = { + .val_min = 3500000, + .val_max = 10000000, + .val_stp = 500000, + .reg_min = 1, + .reg_max = 14, +}; + +static struct da9121_range da9121_3A_1phase_current = { + .val_min = 3500000, + .val_max = 6000000, + .val_stp = 500000, + .reg_min = 1, + .reg_max = 6, +}; + +struct da9121_variant_info { + int num_bucks; + int num_phases; + struct da9121_range *current_range; +}; + +static const struct da9121_variant_info variant_parameters[] = { + { 1, 2, &da9121_10A_2phase_current }, //DA9121_TYPE_DA9121_DA9130 + { 2, 1, &da9121_3A_1phase_current }, //DA9121_TYPE_DA9220_DA9132 + { 2, 1, &da9121_5A_1phase_current }, //DA9121_TYPE_DA9122_DA9131 + { 1, 2, &da9121_6A_2phase_current }, //DA9121_TYPE_DA9217 +}; + +struct da9121_field { + unsigned int reg; + unsigned int msk; +}; + +static const struct da9121_field da9121_current_field[2] = { + { DA9121_REG_BUCK_BUCK1_2, DA9121_MASK_BUCK_BUCKx_2_CHx_ILIM }, + { DA9xxx_REG_BUCK_BUCK2_2, DA9121_MASK_BUCK_BUCKx_2_CHx_ILIM }, +}; + +static const struct da9121_field da9121_mode_field[2] = { + { DA9121_REG_BUCK_BUCK1_4, DA9121_MASK_BUCK_BUCKx_4_CHx_A_MODE }, + { DA9xxx_REG_BUCK_BUCK2_4, DA9121_MASK_BUCK_BUCKx_4_CHx_A_MODE }, +}; + +struct status_event_data { + int buck_id; /* 0=core, 1/2-buck */ + int reg_index; /* index for status/event/mask register selection */ + int status_bit; /* bit masks... */ + int event_bit; + int mask_bit; + unsigned long notification; /* Notification for status inception */ + char *warn; /* if NULL, notify - otherwise dev_warn this string */ +}; + +#define DA9121_STATUS(id, bank, name, notification, warning) \ + { id, bank, \ + DA9121_MASK_SYS_STATUS_##bank##_##name, \ + DA9121_MASK_SYS_EVENT_##bank##_E_##name, \ + DA9121_MASK_SYS_MASK_##bank##_M_##name, \ + notification, warning } + +/* For second buck related event bits that are specific to DA9122, DA9220 variants */ +#define DA9xxx_STATUS(id, bank, name, notification, warning) \ + { id, bank, \ + DA9xxx_MASK_SYS_STATUS_##bank##_##name, \ + DA9xxx_MASK_SYS_EVENT_##bank##_E_##name, \ + DA9xxx_MASK_SYS_MASK_##bank##_M_##name, \ + notification, warning } + +/* The status signals that may need servicing, depending on device variant. + * After assertion, they persist; so event is notified, the IRQ disabled, + * and status polled until clear again and IRQ is reenabled. + * + * SG/PG1/PG2 should be set when device first powers up and should never + * re-occur. When this driver starts, it is expected that these will have + * self-cleared for when the IRQs are enabled, so these should never be seen. + * If seen, the implication is that the device has reset. + * + * GPIO0/1/2 are not configured for use by default, so should not be seen. + */ +static const struct status_event_data status_event_handling[] = { + DA9xxx_STATUS(0, 0, SG, 0, "Handled E_SG\n"), + DA9121_STATUS(0, 0, TEMP_CRIT, (REGULATOR_EVENT_OVER_TEMP|REGULATOR_EVENT_DISABLE), NULL), + DA9121_STATUS(0, 0, TEMP_WARN, REGULATOR_EVENT_OVER_TEMP, NULL), + DA9121_STATUS(1, 1, PG1, 0, "Handled E_PG1\n"), + DA9121_STATUS(1, 1, OV1, REGULATOR_EVENT_REGULATION_OUT, NULL), + DA9121_STATUS(1, 1, UV1, REGULATOR_EVENT_UNDER_VOLTAGE, NULL), + DA9121_STATUS(1, 1, OC1, REGULATOR_EVENT_OVER_CURRENT, NULL), + DA9xxx_STATUS(2, 1, PG2, 0, "Handled E_PG2\n"), + DA9xxx_STATUS(2, 1, OV2, REGULATOR_EVENT_REGULATION_OUT, NULL), + DA9xxx_STATUS(2, 1, UV2, REGULATOR_EVENT_UNDER_VOLTAGE, NULL), + DA9xxx_STATUS(2, 1, OC2, REGULATOR_EVENT_OVER_CURRENT, NULL), + DA9121_STATUS(0, 2, GPIO0, 0, "Handled E_GPIO0\n"), + DA9121_STATUS(0, 2, GPIO1, 0, "Handled E_GPIO1\n"), + DA9121_STATUS(0, 2, GPIO2, 0, "Handled E_GPIO2\n"), +}; + +static int da9121_get_current_limit(struct regulator_dev *rdev) +{ + struct da9121 *chip = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + struct da9121_range *range = + variant_parameters[chip->variant_id].current_range; + unsigned int val = 0; + int ret = 0; + + ret = regmap_read(chip->regmap, da9121_current_field[id].reg, &val); + if (ret < 0) { + dev_err(chip->dev, "Cannot read BUCK register: %d\n", ret); + goto error; + } + + if (val < range->reg_min) { + ret = -EACCES; + goto error; + } + + if (val > range->reg_max) { + ret = -EINVAL; + goto error; + } + + return range->val_min + (range->val_stp * (val - range->reg_min)); +error: + return ret; +} + +static int da9121_ceiling_selector(struct regulator_dev *rdev, + int min, int max, + unsigned int *selector) +{ + struct da9121 *chip = rdev_get_drvdata(rdev); + struct da9121_range *range = + variant_parameters[chip->variant_id].current_range; + unsigned int level; + unsigned int i = 0; + unsigned int sel = 0; + int ret = 0; + + if (range->val_min > max || range->val_max < min) { + dev_err(chip->dev, + "Requested current out of regulator capability\n"); + ret = -EINVAL; + goto error; + } + + level = range->val_max; + for (i = range->reg_max; i >= range->reg_min; i--) { + if (level <= max) { + sel = i; + break; + } + level -= range->val_stp; + } + + if (level < min) { + dev_err(chip->dev, + "Best match falls below minimum requested current\n"); + ret = -EINVAL; + goto error; + } + + *selector = sel; +error: + return ret; +} + +static int da9121_set_current_limit(struct regulator_dev *rdev, + int min_ua, int max_ua) +{ + struct da9121 *chip = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + struct da9121_range *range = + variant_parameters[chip->variant_id].current_range; + unsigned int sel = 0; + int ret = 0; + + if (min_ua < range->val_min || + max_ua > range->val_max) { + ret = -EINVAL; + goto error; + } + + ret = da9121_ceiling_selector(rdev, min_ua, max_ua, &sel); + if (ret < 0) + goto error; + + ret = regmap_update_bits(chip->regmap, + da9121_current_field[id].reg, + da9121_current_field[id].msk, + (unsigned int)sel); + if (ret < 0) + dev_err(chip->dev, "Cannot update BUCK current limit, err: %d\n", ret); + +error: + return ret; +} + +static unsigned int da9121_map_mode(unsigned int mode) +{ + switch (mode) { + case DA9121_BUCK_MODE_FORCE_PWM: + return REGULATOR_MODE_FAST; + case DA9121_BUCK_MODE_FORCE_PWM_SHEDDING: + return REGULATOR_MODE_NORMAL; + case DA9121_BUCK_MODE_AUTO: + return REGULATOR_MODE_IDLE; + case DA9121_BUCK_MODE_FORCE_PFM: + return REGULATOR_MODE_STANDBY; + default: + return -EINVAL; + } +} + +static int da9121_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct da9121 *chip = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + unsigned int val; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = DA9121_BUCK_MODE_FORCE_PWM; + break; + case REGULATOR_MODE_NORMAL: + val = DA9121_BUCK_MODE_FORCE_PWM_SHEDDING; + break; + case REGULATOR_MODE_IDLE: + val = DA9121_BUCK_MODE_AUTO; + break; + case REGULATOR_MODE_STANDBY: + val = DA9121_BUCK_MODE_FORCE_PFM; + break; + default: + return -EINVAL; + } + + return regmap_update_bits(chip->regmap, + da9121_mode_field[id].reg, + da9121_mode_field[id].msk, + val); +} + +static unsigned int da9121_buck_get_mode(struct regulator_dev *rdev) +{ + struct da9121 *chip = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + unsigned int val; + int ret = 0; + + ret = regmap_read(chip->regmap, da9121_mode_field[id].reg, &val); + if (ret < 0) { + dev_err(chip->dev, "Cannot read BUCK register: %d\n", ret); + return -EINVAL; + } + + return da9121_map_mode(val & da9121_mode_field[id].msk); +} + +static const struct regulator_ops da9121_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .get_current_limit = da9121_get_current_limit, + .set_current_limit = da9121_set_current_limit, + .set_mode = da9121_buck_set_mode, + .get_mode = da9121_buck_get_mode, +}; + +static struct of_regulator_match da9121_matches[] = { + [DA9121_IDX_BUCK1] = { .name = "buck1" }, + [DA9121_IDX_BUCK2] = { .name = "buck2" }, +}; + +static int da9121_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct da9121 *chip = config->driver_data; + struct da9121_pdata *pdata; + struct gpio_desc *ena_gpiod; + + if (chip->pdata == NULL) { + pdata = devm_kzalloc(chip->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + } else { + pdata = chip->pdata; + } + + pdata->num_buck++; + + if (pdata->num_buck > variant_parameters[chip->variant_id].num_bucks) { + dev_err(chip->dev, "Error: excessive regulators for device\n"); + return -ENODEV; + } + + ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(np), "enable", 0, + GPIOD_OUT_HIGH | + GPIOD_FLAGS_BIT_NONEXCLUSIVE, + "da9121-enable"); + if (!IS_ERR(ena_gpiod)) + config->ena_gpiod = ena_gpiod; + + if (variant_parameters[chip->variant_id].num_bucks == 2) { + uint32_t ripple_cancel; + uint32_t ripple_reg; + int ret; + + if (of_property_read_u32(da9121_matches[pdata->num_buck-1].of_node, + "dlg,ripple-cancel", &ripple_cancel)) { + if (pdata->num_buck > 1) + ripple_reg = DA9xxx_REG_BUCK_BUCK2_7; + else + ripple_reg = DA9121_REG_BUCK_BUCK1_7; + + ret = regmap_update_bits(chip->regmap, ripple_reg, + DA9xxx_MASK_BUCK_BUCKx_7_CHx_RIPPLE_CANCEL, + ripple_cancel); + if (ret < 0) + dev_err(chip->dev, "Cannot set ripple mode, err: %d\n", ret); + } + } + + return 0; +} + +#define DA9121_MIN_MV 300 +#define DA9121_MAX_MV 1900 +#define DA9121_STEP_MV 10 +#define DA9121_MIN_SEL (DA9121_MIN_MV / DA9121_STEP_MV) +#define DA9121_N_VOLTAGES (((DA9121_MAX_MV - DA9121_MIN_MV) / DA9121_STEP_MV) \ + + 1 + DA9121_MIN_SEL) + +static const struct regulator_desc da9121_reg = { + .id = DA9121_IDX_BUCK1, + .name = "da9121", + .of_match = "buck1", + .of_parse_cb = da9121_of_parse_cb, + .owner = THIS_MODULE, + .regulators_node = of_match_ptr("regulators"), + .of_map_mode = da9121_map_mode, + .ops = &da9121_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = DA9121_N_VOLTAGES, + .min_uV = DA9121_MIN_MV * 1000, + .uV_step = DA9121_STEP_MV * 1000, + .linear_min_sel = DA9121_MIN_SEL, + .vsel_reg = DA9121_REG_BUCK_BUCK1_5, + .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, + .enable_reg = DA9121_REG_BUCK_BUCK1_0, + .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, + /* Default value of BUCK_BUCK1_0.CH1_SRC_DVC_UP */ + .ramp_delay = 20000, + /* tBUCK_EN */ + .enable_time = 20, +}; + +static const struct regulator_desc da9220_reg[2] = { + { + .id = DA9121_IDX_BUCK1, + .name = "DA9220/DA9132 BUCK1", + .of_match = "buck1", + .of_parse_cb = da9121_of_parse_cb, + .owner = THIS_MODULE, + .regulators_node = of_match_ptr("regulators"), + .of_map_mode = da9121_map_mode, + .ops = &da9121_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = DA9121_N_VOLTAGES, + .min_uV = DA9121_MIN_MV * 1000, + .uV_step = DA9121_STEP_MV * 1000, + .linear_min_sel = DA9121_MIN_SEL, + .enable_reg = DA9121_REG_BUCK_BUCK1_0, + .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, + .vsel_reg = DA9121_REG_BUCK_BUCK1_5, + .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, + }, + { + .id = DA9121_IDX_BUCK2, + .name = "DA9220/DA9132 BUCK2", + .of_match = "buck2", + .of_parse_cb = da9121_of_parse_cb, + .owner = THIS_MODULE, + .regulators_node = of_match_ptr("regulators"), + .of_map_mode = da9121_map_mode, + .ops = &da9121_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = DA9121_N_VOLTAGES, + .min_uV = DA9121_MIN_MV * 1000, + .uV_step = DA9121_STEP_MV * 1000, + .linear_min_sel = DA9121_MIN_SEL, + .enable_reg = DA9xxx_REG_BUCK_BUCK2_0, + .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, + .vsel_reg = DA9xxx_REG_BUCK_BUCK2_5, + .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, + } +}; + +static const struct regulator_desc da9122_reg[2] = { + { + .id = DA9121_IDX_BUCK1, + .name = "DA9122/DA9131 BUCK1", + .of_match = "buck1", + .of_parse_cb = da9121_of_parse_cb, + .owner = THIS_MODULE, + .regulators_node = of_match_ptr("regulators"), + .of_map_mode = da9121_map_mode, + .ops = &da9121_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = DA9121_N_VOLTAGES, + .min_uV = DA9121_MIN_MV * 1000, + .uV_step = DA9121_STEP_MV * 1000, + .linear_min_sel = DA9121_MIN_SEL, + .enable_reg = DA9121_REG_BUCK_BUCK1_0, + .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, + .vsel_reg = DA9121_REG_BUCK_BUCK1_5, + .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, + }, + { + .id = DA9121_IDX_BUCK2, + .name = "DA9122/DA9131 BUCK2", + .of_match = "buck2", + .of_parse_cb = da9121_of_parse_cb, + .owner = THIS_MODULE, + .regulators_node = of_match_ptr("regulators"), + .of_map_mode = da9121_map_mode, + .ops = &da9121_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = DA9121_N_VOLTAGES, + .min_uV = DA9121_MIN_MV * 1000, + .uV_step = DA9121_STEP_MV * 1000, + .linear_min_sel = DA9121_MIN_SEL, + .enable_reg = DA9xxx_REG_BUCK_BUCK2_0, + .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, + .vsel_reg = DA9xxx_REG_BUCK_BUCK2_5, + .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, + } +}; + +static const struct regulator_desc da9217_reg = { + .id = DA9121_IDX_BUCK1, + .name = "DA9217 BUCK1", + .of_match = "buck1", + .of_parse_cb = da9121_of_parse_cb, + .owner = THIS_MODULE, + .regulators_node = of_match_ptr("regulators"), + .of_map_mode = da9121_map_mode, + .ops = &da9121_buck_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = DA9121_N_VOLTAGES, + .min_uV = DA9121_MIN_MV * 1000, + .uV_step = DA9121_STEP_MV * 1000, + .linear_min_sel = DA9121_MIN_SEL, + .enable_reg = DA9121_REG_BUCK_BUCK1_0, + .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, + .vsel_reg = DA9121_REG_BUCK_BUCK1_5, + .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, +}; + +static const struct regulator_desc *local_da9121_regulators[][DA9121_IDX_MAX] = { + [DA9121_TYPE_DA9121_DA9130] = { &da9121_reg, NULL }, + [DA9121_TYPE_DA9220_DA9132] = { &da9220_reg[0], &da9220_reg[1] }, + [DA9121_TYPE_DA9122_DA9131] = { &da9122_reg[0], &da9122_reg[1] }, + [DA9121_TYPE_DA9217] = { &da9217_reg, NULL }, +}; + +static void da9121_status_poll_on(struct work_struct *work) +{ + struct da9121 *chip = container_of(work, struct da9121, work.work); + int status[3] = {0}; + int clear[3] = {0}; + unsigned long delay; + int i; + int ret; + + ret = regmap_bulk_read(chip->regmap, DA9121_REG_SYS_STATUS_0, status, 2); + if (ret < 0) { + dev_err(chip->dev, + "Failed to read STATUS registers: %d\n", ret); + goto error; + } + + /* Possible events are tested to be within range for the variant, potentially + * masked by the IRQ handler (not just warned about), as having been masked, + * and the respective state cleared - then flagged to unmask for next IRQ. + */ + for (i = 0; i < ARRAY_SIZE(status_event_handling); i++) { + const struct status_event_data *item = &status_event_handling[i]; + int reg_idx = item->reg_index; + bool relevant = (item->buck_id <= variant_parameters[chip->variant_id].num_bucks); + bool supported = (item->warn == NULL); + bool persisting = (chip->persistent[reg_idx] & item->event_bit); + bool now_cleared = !(status[reg_idx] & item->status_bit); + + if (relevant && supported && persisting && now_cleared) { + clear[reg_idx] |= item->mask_bit; + chip->persistent[reg_idx] &= ~item->event_bit; + } + } + + for (i = 0; i < 2; i++) { + if (clear[i]) { + unsigned int reg = DA9121_REG_SYS_MASK_0 + i; + unsigned int mbit = clear[i]; + + ret = regmap_update_bits(chip->regmap, reg, mbit, 0); + if (ret < 0) { + dev_err(chip->dev, + "Failed to unmask 0x%02x %d\n", + reg, ret); + goto error; + } + } + } + + if (chip->persistent[0] | chip->persistent[1]) { + delay = msecs_to_jiffies(chip->passive_delay); + queue_delayed_work(system_freezable_wq, &chip->work, delay); + } + +error: + return; +} + +static irqreturn_t da9121_irq_handler(int irq, void *data) +{ + struct da9121 *chip = data; + struct regulator_dev *rdev; + int event[3] = {0}; + int handled[3] = {0}; + int mask[3] = {0}; + int ret = IRQ_NONE; + int i; + int err; + + err = regmap_bulk_read(chip->regmap, DA9121_REG_SYS_EVENT_0, event, 3); + if (err < 0) { + dev_err(chip->dev, "Failed to read EVENT registers %d\n", err); + ret = IRQ_NONE; + goto error; + } + + err = regmap_bulk_read(chip->regmap, DA9121_REG_SYS_MASK_0, mask, 3); + if (err < 0) { + dev_err(chip->dev, + "Failed to read MASK registers: %d\n", ret); + ret = IRQ_NONE; + goto error; + } + + rdev = chip->rdev[DA9121_IDX_BUCK1]; + + /* Possible events are tested to be within range for the variant, currently + * enabled, and having triggered this IRQ. The event may then be notified, + * or a warning given for unexpected events - those from device POR, and + * currently unsupported GPIO configurations. + */ + for (i = 0; i < ARRAY_SIZE(status_event_handling); i++) { + const struct status_event_data *item = &status_event_handling[i]; + int reg_idx = item->reg_index; + bool relevant = (item->buck_id <= variant_parameters[chip->variant_id].num_bucks); + bool enabled = !(mask[reg_idx] & item->mask_bit); + bool active = (event[reg_idx] & item->event_bit); + bool notify = (item->warn == NULL); + + if (relevant && enabled && active) { + if (notify) { + chip->persistent[reg_idx] |= item->event_bit; + regulator_notifier_call_chain(rdev, item->notification, NULL); + } else { + dev_warn(chip->dev, item->warn); + handled[reg_idx] |= item->event_bit; + ret = IRQ_HANDLED; + } + } + } + + for (i = 0; i < 3; i++) { + if (event[i] != handled[i]) { + dev_warn(chip->dev, + "Unhandled event(s) in bank%d 0x%02x\n", i, + event[i] ^ handled[i]); + } + } + + /* Mask the interrupts for persistent events OV, OC, UV, WARN, CRIT */ + for (i = 0; i < 2; i++) { + if (handled[i]) { + unsigned int reg = DA9121_REG_SYS_MASK_0 + i; + unsigned int mbit = handled[i]; + + err = regmap_update_bits(chip->regmap, reg, mbit, mbit); + if (err < 0) { + dev_err(chip->dev, + "Failed to mask 0x%02x interrupt %d\n", + reg, err); + ret = IRQ_NONE; + goto error; + } + } + } + + /* clear the events */ + if (handled[0] | handled[1] | handled[2]) { + err = regmap_bulk_write(chip->regmap, DA9121_REG_SYS_EVENT_0, handled, 3); + if (err < 0) { + dev_err(chip->dev, "Fail to write EVENTs %d\n", err); + ret = IRQ_NONE; + goto error; + } + } + + queue_delayed_work(system_freezable_wq, &chip->work, 0); +error: + return ret; +} + +static int da9121_set_regulator_config(struct da9121 *chip) +{ + struct regulator_config config = { }; + unsigned int max_matches = variant_parameters[chip->variant_id].num_bucks; + int ret = 0; + int i; + + for (i = 0; i < max_matches; i++) { + const struct regulator_desc *regl_desc = + local_da9121_regulators[chip->variant_id][i]; + + config.dev = chip->dev; + config.driver_data = chip; + config.regmap = chip->regmap; + + chip->rdev[i] = devm_regulator_register(chip->dev, + regl_desc, &config); + if (IS_ERR(chip->rdev[i])) { + dev_err(chip->dev, "Failed to register regulator %s, %d/%d\n", + regl_desc->name, (i+1), max_matches); + ret = PTR_ERR(chip->rdev[i]); + goto error; + } + } + +error: + return ret; +} + +/* DA9121 chip register model */ +static const struct regmap_range da9121_1ch_readable_ranges[] = { + regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_MASK_3), + regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3), + regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), + regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_6), + regmap_reg_range(DA9121_REG_OTP_DEVICE_ID, DA9121_REG_OTP_CONFIG_ID), +}; + +static const struct regmap_access_table da9121_1ch_readable_table = { + .yes_ranges = da9121_1ch_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9121_1ch_readable_ranges), +}; + +static const struct regmap_range da9121_2ch_readable_ranges[] = { + regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_MASK_3), + regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3), + regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), + regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_7), + regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_0, DA9xxx_REG_BUCK_BUCK2_7), + regmap_reg_range(DA9121_REG_OTP_DEVICE_ID, DA9121_REG_OTP_CONFIG_ID), +}; + +static const struct regmap_access_table da9121_2ch_readable_table = { + .yes_ranges = da9121_2ch_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9121_2ch_readable_ranges), +}; + +static const struct regmap_range da9121_1ch_writeable_ranges[] = { + regmap_reg_range(DA9121_REG_SYS_EVENT_0, DA9121_REG_SYS_MASK_3), + regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3), + regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), + regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_2), + regmap_reg_range(DA9121_REG_BUCK_BUCK1_4, DA9121_REG_BUCK_BUCK1_6), +}; + +static const struct regmap_access_table da9121_1ch_writeable_table = { + .yes_ranges = da9121_1ch_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9121_1ch_writeable_ranges), +}; + +static const struct regmap_range da9121_2ch_writeable_ranges[] = { + regmap_reg_range(DA9121_REG_SYS_EVENT_0, DA9121_REG_SYS_MASK_3), + regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3), + regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), + regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_2), + regmap_reg_range(DA9121_REG_BUCK_BUCK1_4, DA9121_REG_BUCK_BUCK1_7), + regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_0, DA9xxx_REG_BUCK_BUCK2_2), + regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_4, DA9xxx_REG_BUCK_BUCK2_7), +}; + +static const struct regmap_access_table da9121_2ch_writeable_table = { + .yes_ranges = da9121_2ch_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(da9121_2ch_writeable_ranges), +}; + + +static const struct regmap_range da9121_volatile_ranges[] = { + regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_EVENT_2), + regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), + regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_6), +}; + +static const struct regmap_access_table da9121_volatile_table = { + .yes_ranges = da9121_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(da9121_volatile_ranges), +}; + +/* DA9121 regmap config for 1 channel variants */ +static struct regmap_config da9121_1ch_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = DA9121_REG_OTP_CONFIG_ID, + .rd_table = &da9121_1ch_readable_table, + .wr_table = &da9121_1ch_writeable_table, + .volatile_table = &da9121_volatile_table, + .cache_type = REGCACHE_RBTREE, +}; + +/* DA9121 regmap config for 2 channel variants */ +static struct regmap_config da9121_2ch_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = DA9121_REG_OTP_CONFIG_ID, + .rd_table = &da9121_2ch_readable_table, + .wr_table = &da9121_2ch_writeable_table, + .volatile_table = &da9121_volatile_table, + .cache_type = REGCACHE_RBTREE, +}; + +static int da9121_check_device_type(struct i2c_client *i2c, struct da9121 *chip) +{ + u32 device_id; + u8 chip_id = chip->variant_id; + u32 variant_id; + u8 variant_mrc, variant_vrc; + char *type; + bool config_match = false; + int ret = 0; + + ret = regmap_read(chip->regmap, DA9121_REG_OTP_DEVICE_ID, &device_id); + if (ret < 0) { + dev_err(chip->dev, "Cannot read device ID: %d\n", ret); + goto error; + } + + ret = regmap_read(chip->regmap, DA9121_REG_OTP_VARIANT_ID, &variant_id); + if (ret < 0) { + dev_err(chip->dev, "Cannot read variant ID: %d\n", ret); + goto error; + } + + if (device_id != DA9121_DEVICE_ID) { + dev_err(chip->dev, "Invalid device ID: 0x%02x\n", device_id); + ret = -ENODEV; + goto error; + } + + variant_vrc = variant_id & DA9121_MASK_OTP_VARIANT_ID_VRC; + + switch (variant_vrc) { + case DA9121_VARIANT_VRC: + type = "DA9121/DA9130"; + config_match = (chip_id == DA9121_TYPE_DA9121_DA9130); + break; + case DA9220_VARIANT_VRC: + type = "DA9220/DA9132"; + config_match = (chip_id == DA9121_TYPE_DA9220_DA9132); + break; + case DA9122_VARIANT_VRC: + type = "DA9122/DA9131"; + config_match = (chip_id == DA9121_TYPE_DA9122_DA9131); + break; + case DA9217_VARIANT_VRC: + type = "DA9217"; + config_match = (chip_id == DA9121_TYPE_DA9217); + break; + default: + type = "Unknown"; + break; + } + + dev_info(chip->dev, + "Device detected (device-ID: 0x%02X, var-ID: 0x%02X, %s)\n", + device_id, variant_id, type); + + if (!config_match) { + dev_err(chip->dev, "Device tree configuration does not match detected device.\n"); + ret = -EINVAL; + goto error; + } + + variant_mrc = (variant_id & DA9121_MASK_OTP_VARIANT_ID_MRC) + >> DA9121_SHIFT_OTP_VARIANT_ID_MRC; + + if ((device_id == DA9121_DEVICE_ID) && + (variant_mrc < DA9121_VARIANT_MRC_BASE)) { + dev_err(chip->dev, + "Cannot support variant MRC: 0x%02X\n", variant_mrc); + ret = -EINVAL; + } +error: + return ret; +} + +static int da9121_assign_chip_model(struct i2c_client *i2c, + struct da9121 *chip) +{ + struct regmap_config *regmap; + int ret = 0; + + chip->dev = &i2c->dev; + + switch (chip->variant_id) { + case DA9121_TYPE_DA9121_DA9130: + fallthrough; + case DA9121_TYPE_DA9217: + regmap = &da9121_1ch_regmap_config; + break; + case DA9121_TYPE_DA9122_DA9131: + fallthrough; + case DA9121_TYPE_DA9220_DA9132: + regmap = &da9121_2ch_regmap_config; + break; + } + + /* Set these up for of_regulator_match call which may want .of_map_modes */ + da9121_matches[0].desc = local_da9121_regulators[chip->variant_id][0]; + da9121_matches[1].desc = local_da9121_regulators[chip->variant_id][1]; + + chip->regmap = devm_regmap_init_i2c(i2c, regmap); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + dev_err(chip->dev, "Failed to configure a register map: %d\n", + ret); + return ret; + } + + ret = da9121_check_device_type(i2c, chip); + + return ret; +} + +static int da9121_config_irq(struct i2c_client *i2c, + struct da9121 *chip) +{ + unsigned int p_delay = DA9121_DEFAULT_POLLING_PERIOD_MS; + const int mask_all[4] = { 0, 0, 0xFF, 0xFF }; + int ret = 0; + + chip->chip_irq = i2c->irq; + + if (chip->chip_irq != 0) { + if (!of_property_read_u32(chip->dev->of_node, + "dlg,irq-polling-delay-passive-ms", + &p_delay)) { + if (p_delay < DA9121_MIN_POLLING_PERIOD_MS || + p_delay > DA9121_MAX_POLLING_PERIOD_MS) { + dev_warn(chip->dev, + "Out-of-range polling period %d ms\n", + p_delay); + p_delay = DA9121_DEFAULT_POLLING_PERIOD_MS; + } + } + + chip->passive_delay = p_delay; + + ret = request_threaded_irq(chip->chip_irq, NULL, + da9121_irq_handler, + IRQF_TRIGGER_LOW|IRQF_ONESHOT, + "da9121", chip); + if (ret != 0) { + dev_err(chip->dev, "Failed IRQ request: %d\n", + chip->chip_irq); + goto error; + } + + ret = regmap_bulk_write(chip->regmap, DA9121_REG_SYS_MASK_0, mask_all, 4); + if (ret != 0) { + dev_err(chip->dev, "Failed to set IRQ masks: %d\n", + ret); + goto regmap_error; + } + + INIT_DELAYED_WORK(&chip->work, da9121_status_poll_on); + dev_info(chip->dev, "Interrupt polling period set at %d ms\n", + chip->passive_delay); + } +error: + return ret; +regmap_error: + free_irq(chip->chip_irq, chip); + return ret; +} + +static const struct of_device_id da9121_dt_ids[] = { + { .compatible = "dlg,da9121", .data = (void *) DA9121_TYPE_DA9121_DA9130 }, + { .compatible = "dlg,da9130", .data = (void *) DA9121_TYPE_DA9121_DA9130 }, + { .compatible = "dlg,da9217", .data = (void *) DA9121_TYPE_DA9217 }, + { .compatible = "dlg,da9122", .data = (void *) DA9121_TYPE_DA9122_DA9131 }, + { .compatible = "dlg,da9131", .data = (void *) DA9121_TYPE_DA9122_DA9131 }, + { .compatible = "dlg,da9220", .data = (void *) DA9121_TYPE_DA9220_DA9132 }, + { .compatible = "dlg,da9132", .data = (void *) DA9121_TYPE_DA9220_DA9132 }, + { } +}; +MODULE_DEVICE_TABLE(of, da9121_dt_ids); + +static inline int da9121_of_get_id(struct device *dev) +{ + const struct of_device_id *id = of_match_device(da9121_dt_ids, dev); + + if (!id) { + dev_err(dev, "%s: Failed\n", __func__); + return -EINVAL; + } + return (uintptr_t)id->data; +} + +static int da9121_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct da9121 *chip; + const int mask_all[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; + int ret = 0; + + chip = devm_kzalloc(&i2c->dev, sizeof(struct da9121), GFP_KERNEL); + if (!chip) { + ret = -ENOMEM; + goto error; + } + + chip->pdata = i2c->dev.platform_data; + chip->variant_id = da9121_of_get_id(&i2c->dev); + + ret = da9121_assign_chip_model(i2c, chip); + if (ret < 0) + goto error; + + ret = regmap_bulk_write(chip->regmap, DA9121_REG_SYS_MASK_0, mask_all, 4); + if (ret != 0) { + dev_err(chip->dev, "Failed to set IRQ masks: %d\n", ret); + goto error; + } + + ret = da9121_set_regulator_config(chip); + if (ret < 0) + goto error; + + ret = da9121_config_irq(i2c, chip); + +error: + return ret; +} + +static int da9121_i2c_remove(struct i2c_client *i2c) +{ + struct da9121 *chip = i2c_get_clientdata(i2c); + const int mask_all[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; + int ret = 0; + + free_irq(chip->chip_irq, chip); + cancel_delayed_work_sync(&chip->work); + + ret = regmap_bulk_write(chip->regmap, DA9121_REG_SYS_MASK_0, mask_all, 4); + if (ret != 0) + dev_err(chip->dev, "Failed to set IRQ masks: %d\n", ret); + return ret; +} + +static const struct i2c_device_id da9121_i2c_id[] = { + {"da9121", DA9121_TYPE_DA9121_DA9130}, + {"da9130", DA9121_TYPE_DA9121_DA9130}, + {"da9217", DA9121_TYPE_DA9217}, + {"da9122", DA9121_TYPE_DA9122_DA9131}, + {"da9131", DA9121_TYPE_DA9122_DA9131}, + {"da9220", DA9121_TYPE_DA9220_DA9132}, + {"da9132", DA9121_TYPE_DA9220_DA9132}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, da9121_i2c_id); + +static struct i2c_driver da9121_regulator_driver = { + .driver = { + .name = "da9121", + .of_match_table = of_match_ptr(da9121_dt_ids), + }, + .probe = da9121_i2c_probe, + .remove = da9121_i2c_remove, + .id_table = da9121_i2c_id, +}; + +module_i2c_driver(da9121_regulator_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/da9121-regulator.h b/drivers/regulator/da9121-regulator.h new file mode 100644 index 000000000000..3c34cb889ca8 --- /dev/null +++ b/drivers/regulator/da9121-regulator.h @@ -0,0 +1,291 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * DA9121 Single-channel dual-phase 10A buck converter + * DA9130 Single-channel dual-phase 10A buck converter (Automotive) + * DA9217 Single-channel dual-phase 6A buck converter + * DA9122 Dual-channel single-phase 5A buck converter + * DA9131 Dual-channel single-phase 5A buck converter (Automotive) + * DA9220 Dual-channel single-phase 3A buck converter + * DA9132 Dual-channel single-phase 3A buck converter (Automotive) + * + * Copyright (C) 2020 Dialog Semiconductor + * + * Authors: Steve Twiss, Dialog Semiconductor + * Adam Ward, Dialog Semiconductor + */ + +#ifndef __DA9121_REGISTERS_H__ +#define __DA9121_REGISTERS_H__ + +/* Values for: DA9121_REG_BUCK_BUCKx_4 registers, fields CHx_y_MODE + * DA9121_REG_BUCK_BUCKx_7 registers, fields CHx_RIPPLE_CANCEL + */ +#include <dt-bindings/regulator/dlg,da9121-regulator.h> + +enum da9121_variant { + DA9121_TYPE_DA9121_DA9130, + DA9121_TYPE_DA9220_DA9132, + DA9121_TYPE_DA9122_DA9131, + DA9121_TYPE_DA9217 +}; + +/* Minimum, maximum and default polling millisecond periods are provided + * here as an example. It is expected that any final implementation will + * include a modification of these settings to match the required + * application. + */ +#define DA9121_DEFAULT_POLLING_PERIOD_MS 3000 +#define DA9121_MAX_POLLING_PERIOD_MS 10000 +#define DA9121_MIN_POLLING_PERIOD_MS 1000 + +/* Registers */ + +#define DA9121_REG_SYS_STATUS_0 0x01 +#define DA9121_REG_SYS_STATUS_1 0x02 +#define DA9121_REG_SYS_STATUS_2 0x03 +#define DA9121_REG_SYS_EVENT_0 0x04 +#define DA9121_REG_SYS_EVENT_1 0x05 +#define DA9121_REG_SYS_EVENT_2 0x06 +#define DA9121_REG_SYS_MASK_0 0x07 +#define DA9121_REG_SYS_MASK_1 0x08 +#define DA9121_REG_SYS_MASK_2 0x09 +#define DA9121_REG_SYS_MASK_3 0x0A +#define DA9121_REG_SYS_CONFIG_0 0x0B +#define DA9121_REG_SYS_CONFIG_1 0x0C +#define DA9121_REG_SYS_CONFIG_2 0x0D +#define DA9121_REG_SYS_CONFIG_3 0x0E +#define DA9121_REG_SYS_GPIO0_0 0x10 +#define DA9121_REG_SYS_GPIO0_1 0x11 +#define DA9121_REG_SYS_GPIO1_0 0x12 +#define DA9121_REG_SYS_GPIO1_1 0x13 +#define DA9121_REG_SYS_GPIO2_0 0x14 +#define DA9121_REG_SYS_GPIO2_1 0x15 +#define DA9121_REG_BUCK_BUCK1_0 0x20 +#define DA9121_REG_BUCK_BUCK1_1 0x21 +#define DA9121_REG_BUCK_BUCK1_2 0x22 +#define DA9121_REG_BUCK_BUCK1_3 0x23 +#define DA9121_REG_BUCK_BUCK1_4 0x24 +#define DA9121_REG_BUCK_BUCK1_5 0x25 +#define DA9121_REG_BUCK_BUCK1_6 0x26 +#define DA9121_REG_BUCK_BUCK1_7 0x27 +#define DA9xxx_REG_BUCK_BUCK2_0 0x28 +#define DA9xxx_REG_BUCK_BUCK2_1 0x29 +#define DA9xxx_REG_BUCK_BUCK2_2 0x2A +#define DA9xxx_REG_BUCK_BUCK2_3 0x2B +#define DA9xxx_REG_BUCK_BUCK2_4 0x2C +#define DA9xxx_REG_BUCK_BUCK2_5 0x2D +#define DA9xxx_REG_BUCK_BUCK2_6 0x2E +#define DA9xxx_REG_BUCK_BUCK2_7 0x2F +#define DA9121_REG_OTP_DEVICE_ID 0x48 +#define DA9121_REG_OTP_VARIANT_ID 0x49 +#define DA9121_REG_OTP_CUSTOMER_ID 0x4A +#define DA9121_REG_OTP_CONFIG_ID 0x4B + +/* Register bits */ + +/* DA9121_REG_SYS_STATUS_0 */ + +#define DA9xxx_MASK_SYS_STATUS_0_SG BIT(2) +#define DA9121_MASK_SYS_STATUS_0_TEMP_CRIT BIT(1) +#define DA9121_MASK_SYS_STATUS_0_TEMP_WARN BIT(0) + +/* DA9121_REG_SYS_STATUS_1 */ + +#define DA9xxx_MASK_SYS_STATUS_1_PG2 BIT(7) +#define DA9xxx_MASK_SYS_STATUS_1_OV2 BIT(6) +#define DA9xxx_MASK_SYS_STATUS_1_UV2 BIT(5) +#define DA9xxx_MASK_SYS_STATUS_1_OC2 BIT(4) +#define DA9121_MASK_SYS_STATUS_1_PG1 BIT(3) +#define DA9121_MASK_SYS_STATUS_1_OV1 BIT(2) +#define DA9121_MASK_SYS_STATUS_1_UV1 BIT(1) +#define DA9121_MASK_SYS_STATUS_1_OC1 BIT(0) + +/* DA9121_REG_SYS_STATUS_2 */ + +#define DA9121_MASK_SYS_STATUS_2_GPIO2 BIT(2) +#define DA9121_MASK_SYS_STATUS_2_GPIO1 BIT(1) +#define DA9121_MASK_SYS_STATUS_2_GPIO0 BIT(0) + +/* DA9121_REG_SYS_EVENT_0 */ + +#define DA9xxx_MASK_SYS_EVENT_0_E_SG BIT(2) +#define DA9121_MASK_SYS_EVENT_0_E_TEMP_CRIT BIT(1) +#define DA9121_MASK_SYS_EVENT_0_E_TEMP_WARN BIT(0) + +/* DA9121_REG_SYS_EVENT_1 */ + +#define DA9xxx_MASK_SYS_EVENT_1_E_PG2 BIT(7) +#define DA9xxx_MASK_SYS_EVENT_1_E_OV2 BIT(6) +#define DA9xxx_MASK_SYS_EVENT_1_E_UV2 BIT(5) +#define DA9xxx_MASK_SYS_EVENT_1_E_OC2 BIT(4) +#define DA9121_MASK_SYS_EVENT_1_E_PG1 BIT(3) +#define DA9121_MASK_SYS_EVENT_1_E_OV1 BIT(2) +#define DA9121_MASK_SYS_EVENT_1_E_UV1 BIT(1) +#define DA9121_MASK_SYS_EVENT_1_E_OC1 BIT(0) + +/* DA9121_REG_SYS_EVENT_2 */ + +#define DA9121_MASK_SYS_EVENT_2_E_GPIO2 BIT(2) +#define DA9121_MASK_SYS_EVENT_2_E_GPIO1 BIT(1) +#define DA9121_MASK_SYS_EVENT_2_E_GPIO0 BIT(0) + +/* DA9121_REG_SYS_MASK_0 */ + +#define DA9xxx_MASK_SYS_MASK_0_M_SG BIT(2) +#define DA9121_MASK_SYS_MASK_0_M_TEMP_CRIT BIT(1) +#define DA9121_MASK_SYS_MASK_0_M_TEMP_WARN BIT(0) + +/* DA9121_REG_SYS_MASK_1 */ + +#define DA9xxx_MASK_SYS_MASK_1_M_PG2 BIT(7) +#define DA9xxx_MASK_SYS_MASK_1_M_OV2 BIT(6) +#define DA9xxx_MASK_SYS_MASK_1_M_UV2 BIT(5) +#define DA9xxx_MASK_SYS_MASK_1_M_OC2 BIT(4) +#define DA9121_MASK_SYS_MASK_1_M_PG1 BIT(3) +#define DA9121_MASK_SYS_MASK_1_M_OV1 BIT(2) +#define DA9121_MASK_SYS_MASK_1_M_UV1 BIT(1) +#define DA9121_MASK_SYS_MASK_1_M_OC1 BIT(0) + +/* DA9121_REG_SYS_MASK_2 */ + +#define DA9121_MASK_SYS_MASK_2_M_GPIO2 BIT(2) +#define DA9121_MASK_SYS_MASK_2_M_GPIO1 BIT(1) +#define DA9121_MASK_SYS_MASK_2_M_GPIO0 BIT(0) + +/* DA9122_REG_SYS_MASK_3 */ + +#define DA9121_MASK_SYS_MASK_3_M_VR_HOT BIT(3) +#define DA9xxx_MASK_SYS_MASK_3_M_SG_STAT BIT(2) +#define DA9xxx_MASK_SYS_MASK_3_M_PG2_STAT BIT(1) +#define DA9121_MASK_SYS_MASK_3_M_PG1_STAT BIT(0) + +/* DA9121_REG_SYS_CONFIG_0 */ + +#define DA9121_MASK_SYS_CONFIG_0_CH1_DIS_DLY 0xF0 +#define DA9121_MASK_SYS_CONFIG_0_CH1_EN_DLY 0x0F + +/* DA9xxx_REG_SYS_CONFIG_1 */ + +#define DA9xxx_MASK_SYS_CONFIG_1_CH2_DIS_DLY 0xF0 +#define DA9xxx_MASK_SYS_CONFIG_1_CH2_EN_DLY 0x0F + +/* DA9121_REG_SYS_CONFIG_2 */ + +#define DA9121_MASK_SYS_CONFIG_2_OC_LATCHOFF 0x60 +#define DA9121_MASK_SYS_CONFIG_2_OC_DVC_MASK BIT(4) +#define DA9121_MASK_SYS_CONFIG_2_PG_DVC_MASK 0x0C + +/* DA9121_REG_SYS_CONFIG_3 */ + +#define DA9121_MASK_SYS_CONFIG_3_OSC_TUNE 0X70 +#define DA9121_MASK_SYS_CONFIG_3_I2C_TIMEOUT BIT(1) + +/* DA9121_REG_SYS_GPIO0_0 */ + +#define DA9121_MASK_SYS_GPIO0_0_GPIO0_MODE 0X1E +#define DA9121_MASK_SYS_GPIO0_0_GPIO0_OBUF BIT(0) + +/* DA9121_REG_SYS_GPIO0_1 */ + +#define DA9121_MASK_SYS_GPIO0_1_GPIO0_DEB_FALL BIT(7) +#define DA9121_MASK_SYS_GPIO0_1_GPIO0_DEB_RISE BIT(6) +#define DA9121_MASK_SYS_GPIO0_1_GPIO0_DEB 0x30 +#define DA9121_MASK_SYS_GPIO0_1_GPIO0_PUPD BIT(3) +#define DA9121_MASK_SYS_GPIO0_1_GPIO0_POL BIT(2) +#define DA9121_MASK_SYS_GPIO0_1_GPIO0_TRIG 0x03 + +/* DA9121_REG_SYS_GPIO1_0 */ + +#define DA9121_MASK_SYS_GPIO1_0_GPIO1_MODE 0x1E +#define DA9121_MASK_SYS_GPIO1_0_GPIO1_OBUF BIT(0) + +/* DA9121_REG_SYS_GPIO1_1 */ + +#define DA9121_MASK_SYS_GPIO1_1_GPIO1_DEB_FALL BIT(7) +#define DA9121_MASK_SYS_GPIO1_1_GPIO1_DEB_RISE BIT(6) +#define DA9121_MASK_SYS_GPIO1_1_GPIO1_DEB 0x30 +#define DA9121_MASK_SYS_GPIO1_1_GPIO1_PUPD BIT(3) +#define DA9121_MASK_SYS_GPIO1_1_GPIO1_POL BIT(2) +#define DA9121_MASK_SYS_GPIO1_1_GPIO1_TRIG 0x03 + +/* DA9121_REG_SYS_GPIO2_0 */ + +#define DA9121_MASK_SYS_GPIO2_0_GPIO2_MODE 0x1E +#define DA9121_MASK_SYS_GPIO2_0_GPIO2_OBUF BIT(0) + +/* DA9121_REG_SYS_GPIO2_1 */ + +#define DA9121_MASK_SYS_GPIO2_1_GPIO2_DEB_FALL BIT(7) +#define DA9121_MASK_SYS_GPIO2_1_GPIO2_DEB_RISE BIT(6) +#define DA9121_MASK_SYS_GPIO2_1_GPIO2_DEB 0x30 +#define DA9121_MASK_SYS_GPIO2_1_GPIO2_PUPD BIT(3) +#define DA9121_MASK_SYS_GPIO2_1_GPIO2_POL BIT(2) +#define DA9121_MASK_SYS_GPIO2_1_GPIO2_TRIG 0x03 + +/* DA9121_REG_BUCK_BUCK1_0 / DA9xxx_REG_BUCK_BUCK2_0 */ + +#define DA9121_MASK_BUCK_BUCKx_0_CHx_SR_DVC_DWN 0x70 +#define DA9121_MASK_BUCK_BUCKx_0_CHx_SR_DVC_UP 0x0E +#define DA9121_MASK_BUCK_BUCKx_0_CHx_EN BIT(0) + +/* DA9121_REG_BUCK_BUCK1_1 / DA9xxx_REG_BUCK_BUCK2_1 */ + +#define DA9121_MASK_BUCK_BUCKx_1_CHx_SR_SHDN 0x70 +#define DA9121_MASK_BUCK_BUCKx_1_CHx_SR_STARTUP 0x0E +#define DA9121_MASK_BUCK_BUCKx_1_CHx_PD_DIS BIT(0) + +/* DA9121_REG_BUCK_BUCK1_2 / DA9xxx_REG_BUCK_BUCK2_2 */ + +#define DA9121_MASK_BUCK_BUCKx_2_CHx_ILIM 0x0F + +/* DA9121_REG_BUCK_BUCK1_3 / DA9xxx_REG_BUCK_BUCK2_3 */ + +#define DA9121_MASK_BUCK_BUCKx_3_CHx_VMAX 0xFF + +/* DA9121_REG_BUCK_BUCK1_4 / DA9xxx_REG_BUCK_BUCK2_4 */ + +#define DA9121_MASK_BUCK_BUCKx_4_CHx_VSEL BIT(4) +#define DA9121_MASK_BUCK_BUCKx_4_CHx_B_MODE 0x0C +#define DA9121_MASK_BUCK_BUCKx_4_CHx_A_MODE 0x03 + +/* DA9121_REG_BUCK_BUCK1_5 / DA9xxx_REG_BUCK_BUCK2_5 */ + +#define DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT 0xFF + +/* DA9121_REG_BUCK_BUCK1_6 / DA9xxx_REG_BUCK_BUCK2_6 */ + +#define DA9121_MASK_BUCK_BUCKx_6_CHx_B_VOUT 0xFF + +/* DA9121_REG_BUCK_BUCK1_7 / DA9xxx_REG_BUCK_BUCK2_7 */ + +#define DA9xxx_MASK_BUCK_BUCKx_7_CHx_RIPPLE_CANCEL 0x03 + + +/* DA9121_REG_OTP_DEVICE_ID */ + +#define DA9121_MASK_OTP_DEVICE_ID_DEV_ID 0xFF + +#define DA9121_DEVICE_ID 0x05 + +/* DA9121_REG_OTP_VARIANT_ID */ + +#define DA9121_SHIFT_OTP_VARIANT_ID_MRC 4 +#define DA9121_MASK_OTP_VARIANT_ID_MRC 0xF0 +#define DA9121_SHIFT_OTP_VARIANT_ID_VRC 0 +#define DA9121_MASK_OTP_VARIANT_ID_VRC 0x0F + +#define DA9121_VARIANT_MRC_BASE 0x2 +#define DA9121_VARIANT_VRC 0x1 +#define DA9220_VARIANT_VRC 0x0 +#define DA9122_VARIANT_VRC 0x2 +#define DA9217_VARIANT_VRC 0x7 + +/* DA9121_REG_OTP_CUSTOMER_ID */ + +#define DA9121_MASK_OTP_CUSTOMER_ID_CUST_ID 0xFF + +/* DA9121_REG_OTP_CONFIG_ID */ + +#define DA9121_MASK_OTP_CONFIG_ID_CONFIG_REV 0xFF + +#endif /* __DA9121_REGISTERS_H__ */ diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index 3de7709bdcd4..02ad83153e19 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -18,6 +18,8 @@ #include <linux/mutex.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/pm_opp.h> #include <linux/regulator/driver.h> #include <linux/regulator/fixed.h> #include <linux/gpio/consumer.h> @@ -34,11 +36,13 @@ struct fixed_voltage_data { struct regulator_dev *dev; struct clk *enable_clock; - unsigned int clk_enable_counter; + unsigned int enable_counter; + int performance_state; }; struct fixed_dev_type { bool has_enable_clock; + bool has_performance_state; }; static int reg_clock_enable(struct regulator_dev *rdev) @@ -50,7 +54,7 @@ static int reg_clock_enable(struct regulator_dev *rdev) if (ret) return ret; - priv->clk_enable_counter++; + priv->enable_counter++; return ret; } @@ -60,16 +64,41 @@ static int reg_clock_disable(struct regulator_dev *rdev) struct fixed_voltage_data *priv = rdev_get_drvdata(rdev); clk_disable_unprepare(priv->enable_clock); - priv->clk_enable_counter--; + priv->enable_counter--; return 0; } -static int reg_clock_is_enabled(struct regulator_dev *rdev) +static int reg_domain_enable(struct regulator_dev *rdev) { struct fixed_voltage_data *priv = rdev_get_drvdata(rdev); + struct device *dev = rdev->dev.parent; + int ret; + + ret = dev_pm_genpd_set_performance_state(dev, priv->performance_state); + if (ret) + return ret; - return priv->clk_enable_counter > 0; + priv->enable_counter++; + + return ret; +} + +static int reg_domain_disable(struct regulator_dev *rdev) +{ + struct fixed_voltage_data *priv = rdev_get_drvdata(rdev); + struct device *dev = rdev->dev.parent; + + priv->enable_counter--; + + return dev_pm_genpd_set_performance_state(dev, 0); +} + +static int reg_is_enabled(struct regulator_dev *rdev) +{ + struct fixed_voltage_data *priv = rdev_get_drvdata(rdev); + + return priv->enable_counter > 0; } @@ -129,7 +158,13 @@ static const struct regulator_ops fixed_voltage_ops = { static const struct regulator_ops fixed_voltage_clkenabled_ops = { .enable = reg_clock_enable, .disable = reg_clock_disable, - .is_enabled = reg_clock_is_enabled, + .is_enabled = reg_is_enabled, +}; + +static const struct regulator_ops fixed_voltage_domain_ops = { + .enable = reg_domain_enable, + .disable = reg_domain_disable, + .is_enabled = reg_is_enabled, }; static int reg_fixed_voltage_probe(struct platform_device *pdev) @@ -177,6 +212,14 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) dev_err(dev, "Can't get enable-clock from devicetree\n"); return -ENOENT; } + } else if (drvtype && drvtype->has_performance_state) { + drvdata->desc.ops = &fixed_voltage_domain_ops; + + drvdata->performance_state = of_get_required_opp_performance_state(dev->of_node, 0); + if (drvdata->performance_state < 0) { + dev_err(dev, "Can't get performance state from devicetree\n"); + return drvdata->performance_state; + } } else { drvdata->desc.ops = &fixed_voltage_ops; } @@ -260,6 +303,10 @@ static const struct fixed_dev_type fixed_clkenable_data = { .has_enable_clock = true, }; +static const struct fixed_dev_type fixed_domain_data = { + .has_performance_state = true, +}; + static const struct of_device_id fixed_of_match[] = { { .compatible = "regulator-fixed", @@ -270,6 +317,10 @@ static const struct of_device_id fixed_of_match[] = { .data = &fixed_clkenable_data, }, { + .compatible = "regulator-fixed-domain", + .data = &fixed_domain_data, + }, + { }, }; MODULE_DEVICE_TABLE(of, fixed_of_match); diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index e4bb09bbd3fa..f42b394a0c46 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -649,6 +649,8 @@ int regulator_list_voltage_table(struct regulator_dev *rdev, if (selector >= rdev->desc->n_voltages) return -EINVAL; + if (selector < rdev->desc->linear_min_sel) + return 0; return rdev->desc->volt_table[selector]; } diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 303d7e2dc838..e84be29533f4 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -892,7 +892,7 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) struct lp872x *lp; struct lp872x_platform_data *pdata; int ret; - const int lp872x_num_regulators[] = { + static const int lp872x_num_regulators[] = { [LP8720] = LP8720_NUM_REGULATORS, [LP8725] = LP8725_NUM_REGULATORS, }; diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c index e34face736f4..1d78b455cc48 100644 --- a/drivers/regulator/max14577-regulator.c +++ b/drivers/regulator/max14577-regulator.c @@ -269,3 +269,5 @@ module_exit(max14577_regulator_exit); MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>"); MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:max14577-regulator"); +MODULE_ALIAS("platform:max77836-regulator"); diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index a731e826a037..5221f7a9df91 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -582,8 +582,8 @@ static int mc13892_regulator_probe(struct platform_device *pdev) /* update mc13892_vcam ops */ memcpy(&mc13892_vcam_ops, mc13892_regulators[MC13892_VCAM].desc.ops, sizeof(struct regulator_ops)); - mc13892_vcam_ops.set_mode = mc13892_vcam_set_mode, - mc13892_vcam_ops.get_mode = mc13892_vcam_get_mode, + mc13892_vcam_ops.set_mode = mc13892_vcam_set_mode; + mc13892_vcam_ops.get_mode = mc13892_vcam_get_mode; mc13892_regulators[MC13892_VCAM].desc.ops = &mc13892_vcam_ops; mc13xxx_data = mc13xxx_parse_regulators_dt(pdev, mc13892_regulators, diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c index 6d0ad74935b3..74ad92dc664a 100644 --- a/drivers/regulator/mcp16502.c +++ b/drivers/regulator/mcp16502.c @@ -22,8 +22,9 @@ #define VDD_LOW_SEL 0x0D #define VDD_HIGH_SEL 0x3F -#define MCP16502_FLT BIT(7) -#define MCP16502_ENS BIT(0) +#define MCP16502_FLT BIT(7) +#define MCP16502_DVSR GENMASK(3, 2) +#define MCP16502_ENS BIT(0) /* * The PMIC has four sets of registers corresponding to four power modes: @@ -54,13 +55,9 @@ * This function is useful for iterating over all regulators and accessing their * registers in a generic way or accessing a regulator device by its id. */ -#define MCP16502_BASE(i) (((i) + 1) << 4) +#define MCP16502_REG_BASE(i, r) ((((i) + 1) << 4) + MCP16502_REG_##r) #define MCP16502_STAT_BASE(i) ((i) + 5) -#define MCP16502_OFFSET_MODE_A 0 -#define MCP16502_OFFSET_MODE_LPM 1 -#define MCP16502_OFFSET_MODE_HIB 2 - #define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL #define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE #define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY @@ -75,6 +72,29 @@ #define MCP16502_MIN_REG 0x0 #define MCP16502_MAX_REG 0x65 +/** + * enum mcp16502_reg - MCP16502 regulators's registers + * @MCP16502_REG_A: active state register + * @MCP16502_REG_LPM: low power mode state register + * @MCP16502_REG_HIB: hibernate state register + * @MCP16502_REG_SEQ: startup sequence register + * @MCP16502_REG_CFG: configuration register + */ +enum mcp16502_reg { + MCP16502_REG_A, + MCP16502_REG_LPM, + MCP16502_REG_HIB, + MCP16502_REG_HPM, + MCP16502_REG_SEQ, + MCP16502_REG_CFG, +}; + +/* Ramp delay (uV/us) for buck1, ldo1, ldo2. */ +static const int mcp16502_ramp_b1l12[] = { 6250, 3125, 2083, 1563 }; + +/* Ramp delay (uV/us) for buck2, buck3, buck4. */ +static const int mcp16502_ramp_b234[] = { 3125, 1563, 1042, 781 }; + static unsigned int mcp16502_of_map_mode(unsigned int mode) { if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE) @@ -93,6 +113,7 @@ static unsigned int mcp16502_of_map_mode(unsigned int mode) .owner = THIS_MODULE, \ .n_voltages = MCP16502_VSEL + 1, \ .linear_ranges = _ranges, \ + .linear_min_sel = VDD_LOW_SEL, \ .n_linear_ranges = ARRAY_SIZE(_ranges), \ .of_match = of_match_ptr(_name), \ .of_map_mode = mcp16502_of_map_mode, \ @@ -114,8 +135,6 @@ enum { /* * struct mcp16502 - PMIC representation - * @rdev: the regulators belonging to this chip - * @rmap: regmap to be used for I2C communication * @lpm: LPM GPIO descriptor */ struct mcp16502 { @@ -143,22 +162,20 @@ static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode) } /* - * mcp16502_get_reg() - get the PMIC's configuration register for opmode + * mcp16502_get_reg() - get the PMIC's state configuration register for opmode * * @rdev: the regulator whose register we are searching * @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate */ -static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode) +static int mcp16502_get_state_reg(struct regulator_dev *rdev, int opmode) { - int reg = MCP16502_BASE(rdev_get_id(rdev)); - switch (opmode) { case MCP16502_OPMODE_ACTIVE: - return reg + MCP16502_OFFSET_MODE_A; + return MCP16502_REG_BASE(rdev_get_id(rdev), A); case MCP16502_OPMODE_LPM: - return reg + MCP16502_OFFSET_MODE_LPM; + return MCP16502_REG_BASE(rdev_get_id(rdev), LPM); case MCP16502_OPMODE_HIB: - return reg + MCP16502_OFFSET_MODE_HIB; + return MCP16502_REG_BASE(rdev_get_id(rdev), HIB); default: return -EINVAL; } @@ -178,7 +195,7 @@ static unsigned int mcp16502_get_mode(struct regulator_dev *rdev) unsigned int val; int ret, reg; - reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE); + reg = mcp16502_get_state_reg(rdev, MCP16502_OPMODE_ACTIVE); if (reg < 0) return reg; @@ -209,7 +226,7 @@ static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode, int val; int reg; - reg = mcp16502_get_reg(rdev, op_mode); + reg = mcp16502_get_state_reg(rdev, op_mode); if (reg < 0) return reg; @@ -259,6 +276,80 @@ static int mcp16502_get_status(struct regulator_dev *rdev) return REGULATOR_STATUS_UNDEFINED; } +static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_sel, + unsigned int new_sel) +{ + static const u8 us_ramp[] = { 8, 16, 24, 32 }; + int id = rdev_get_id(rdev); + unsigned int uV_delta, val; + int ret; + + ret = regmap_read(rdev->regmap, MCP16502_REG_BASE(id, CFG), &val); + if (ret) + return ret; + + val = (val & MCP16502_DVSR) >> 2; + uV_delta = abs(new_sel * rdev->desc->linear_ranges->step - + old_sel * rdev->desc->linear_ranges->step); + switch (id) { + case BUCK1: + case LDO1: + case LDO2: + ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val], + mcp16502_ramp_b1l12[val]); + break; + + case BUCK2: + case BUCK3: + case BUCK4: + ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val], + mcp16502_ramp_b234[val]); + break; + + default: + return -EINVAL; + } + + return ret; +} + +static int mcp16502_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) +{ + const int *ramp; + int id = rdev_get_id(rdev); + unsigned int i, size; + + switch (id) { + case BUCK1: + case LDO1: + case LDO2: + ramp = mcp16502_ramp_b1l12; + size = ARRAY_SIZE(mcp16502_ramp_b1l12); + break; + + case BUCK2: + case BUCK3: + case BUCK4: + ramp = mcp16502_ramp_b234; + size = ARRAY_SIZE(mcp16502_ramp_b234); + break; + + default: + return -EINVAL; + } + + for (i = 0; i < size; i++) { + if (ramp[i] == ramp_delay) + break; + } + if (i == size) + return -EINVAL; + + return regmap_update_bits(rdev->regmap, MCP16502_REG_BASE(id, CFG), + MCP16502_DVSR, (i << 2)); +} + #ifdef CONFIG_SUSPEND /* * mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC @@ -268,10 +359,10 @@ static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev) { switch (pm_suspend_target_state) { case PM_SUSPEND_STANDBY: - return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM); + return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_LPM); case PM_SUSPEND_ON: case PM_SUSPEND_MEM: - return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB); + return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_HIB); default: dev_err(&rdev->dev, "invalid suspend target: %d\n", pm_suspend_target_state); @@ -353,6 +444,8 @@ static const struct regulator_ops mcp16502_buck_ops = { .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .get_status = mcp16502_get_status, + .set_voltage_time_sel = mcp16502_set_voltage_time_sel, + .set_ramp_delay = mcp16502_set_ramp_delay, .set_mode = mcp16502_set_mode, .get_mode = mcp16502_get_mode, @@ -377,6 +470,8 @@ static const struct regulator_ops mcp16502_ldo_ops = { .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .get_status = mcp16502_get_status, + .set_voltage_time_sel = mcp16502_set_voltage_time_sel, + .set_ramp_delay = mcp16502_set_ramp_delay, #ifdef CONFIG_SUSPEND .set_suspend_voltage = mcp16502_set_suspend_voltage, diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 06c0b15fe4c0..564f928eb1db 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -413,8 +413,12 @@ device_node *regulator_of_get_init_node(struct device *dev, for_each_available_child_of_node(search, child) { name = of_get_property(child, "regulator-compatible", NULL); - if (!name) - name = child->name; + if (!name) { + if (!desc->of_match_full_name) + name = child->name; + else + name = child->full_name; + } if (!strcmp(desc->of_match, name)) { of_node_put(search); diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c new file mode 100644 index 000000000000..308c27fa6ea8 --- /dev/null +++ b/drivers/regulator/pf8x00-regulator.c @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2017 NXP + * Copyright (C) 2019 Boundary Devices + * Copyright (C) 2020 Amarula Solutions(India) + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> + +/* registers */ +#define PF8X00_DEVICEID 0x00 +#define PF8X00_REVID 0x01 +#define PF8X00_EMREV 0x02 +#define PF8X00_PROGID 0x03 +#define PF8X00_IMS_INT 0x04 +#define PF8X00_IMS_THERM 0x07 +#define PF8X00_SW_MODE_INT 0x0a +#define PF8X00_SW_MODE_MASK 0x0b +#define PF8X00_IMS_SW_ILIM 0x12 +#define PF8X00_IMS_LDO_ILIM 0x15 +#define PF8X00_IMS_SW_UV 0x18 +#define PF8X00_IMS_SW_OV 0x1b +#define PF8X00_IMS_LDO_UV 0x1e +#define PF8X00_IMS_LDO_OV 0x21 +#define PF8X00_IMS_PWRON 0x24 +#define PF8X00_SYS_INT 0x27 +#define PF8X00_HARD_FAULT 0x29 +#define PF8X00_FSOB_FLAGS 0x2a +#define PF8X00_FSOB_SELECT 0x2b +#define PF8X00_ABIST_OV1 0x2c +#define PF8X00_ABIST_OV2 0x2d +#define PF8X00_ABIST_UV1 0x2e +#define PF8X00_ABIST_UV2 0x2f +#define PF8X00_TEST_FLAGS 0x30 +#define PF8X00_ABIST_RUN 0x31 +#define PF8X00_RANDOM_GEN 0x33 +#define PF8X00_RANDOM_CHK 0x34 +#define PF8X00_VMONEN1 0x35 +#define PF8X00_VMONEN2 0x36 +#define PF8X00_CTRL1 0x37 +#define PF8X00_CTRL2 0x38 +#define PF8X00_CTRL3 0x39 +#define PF8X00_PWRUP_CTRL 0x3a +#define PF8X00_RESETBMCU 0x3c +#define PF8X00_PGOOD 0x3d +#define PF8X00_PWRDN_DLY1 0x3e +#define PF8X00_PWRDN_DLY2 0x3f +#define PF8X00_FREQ_CTRL 0x40 +#define PF8X00_COINCELL_CTRL 0x41 +#define PF8X00_PWRON 0x42 +#define PF8X00_WD_CONFIG 0x43 +#define PF8X00_WD_CLEAR 0x44 +#define PF8X00_WD_EXPIRE 0x45 +#define PF8X00_WD_COUNTER 0x46 +#define PF8X00_FAULT_COUNTER 0x47 +#define PF8X00_FSAFE_COUNTER 0x48 +#define PF8X00_FAULT_TIMER 0x49 +#define PF8X00_AMUX 0x4a +#define PF8X00_SW1_CONFIG1 0x4d +#define PF8X00_LDO1_CONFIG1 0x85 +#define PF8X00_VSNVS_CONFIG1 0x9d +#define PF8X00_PAGE_SELECT 0x9f + +/* regulators */ +enum pf8x00_regulators { + PF8X00_LDO1, + PF8X00_LDO2, + PF8X00_LDO3, + PF8X00_LDO4, + PF8X00_BUCK1, + PF8X00_BUCK2, + PF8X00_BUCK3, + PF8X00_BUCK4, + PF8X00_BUCK5, + PF8X00_BUCK6, + PF8X00_BUCK7, + PF8X00_VSNVS, + + PF8X00_MAX_REGULATORS, +}; + +enum pf8x00_buck_states { + SW_CONFIG1, + SW_CONFIG2, + SW_PWRUP, + SW_MODE1, + SW_RUN_VOLT, + SW_STBY_VOLT, +}; +#define PF8X00_SW_BASE(i) (8 * (i - PF8X00_BUCK1) + PF8X00_SW1_CONFIG1) + +enum pf8x00_ldo_states { + LDO_CONFIG1, + LDO_CONFIG2, + LDO_PWRUP, + LDO_RUN_VOLT, + LDO_STBY_VOLT, +}; +#define PF8X00_LDO_BASE(i) (6 * (i - PF8X00_LDO1) + PF8X00_LDO1_CONFIG1) + +enum swxilim_bits { + SWXILIM_2100_MA, + SWXILIM_2600_MA, + SWXILIM_3000_MA, + SWXILIM_4500_MA, +}; +#define PF8X00_SWXILIM_SHIFT 3 +#define PF8X00_SWXILIM_MASK GENMASK(4, 3) +#define PF8X00_SWXPHASE_MASK GENMASK(2, 0) +#define PF8X00_SWXPHASE_DEFAULT 0 +#define PF8X00_SWXPHASE_SHIFT 7 + +enum pf8x00_devid { + PF8100 = 0x0, + PF8121A = BIT(1), + PF8200 = BIT(3), +}; +#define PF8X00_FAM BIT(6) +#define PF8X00_DEVICE_FAM_MASK GENMASK(7, 4) +#define PF8X00_DEVICE_ID_MASK GENMASK(3, 0) + +struct pf8x00_regulator { + struct regulator_desc desc; + u8 ilim; + u8 phase_shift; +}; + +struct pf8x00_chip { + struct regmap *regmap; + struct device *dev; +}; + +static const struct regmap_config pf8x00_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = PF8X00_PAGE_SELECT, + .cache_type = REGCACHE_RBTREE, +}; + +/* VLDOx output: 1.5V to 5.0V */ +static const int pf8x00_ldo_voltages[] = { + 1500000, 1600000, 1800000, 1850000, 2150000, 2500000, 2800000, 3000000, + 3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000, +}; + +#define SWV(i) (6250 * i + 400000) +#define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \ + SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7) + +/* Output: 0.4V to 1.8V */ +static const int pf8x00_sw1_to_6_voltages[] = { + SWV_LINE(0), + SWV_LINE(1), + SWV_LINE(2), + SWV_LINE(3), + SWV_LINE(4), + SWV_LINE(5), + SWV_LINE(6), + SWV_LINE(7), + SWV_LINE(8), + SWV_LINE(9), + SWV_LINE(10), + SWV_LINE(11), + SWV_LINE(12), + SWV_LINE(13), + SWV_LINE(14), + SWV_LINE(15), + SWV_LINE(16), + SWV_LINE(17), + SWV_LINE(18), + SWV_LINE(19), + SWV_LINE(20), + SWV_LINE(21), + 1500000, 1800000, +}; + +/* Output: 1.0V to 4.1V */ +static const int pf8x00_sw7_voltages[] = { + 1000000, 1100000, 1200000, 1250000, 1300000, 1350000, 1500000, 1600000, + 1800000, 1850000, 2000000, 2100000, 2150000, 2250000, 2300000, 2400000, + 2500000, 2800000, 3150000, 3200000, 3250000, 3300000, 3350000, 3400000, + 3500000, 3800000, 4000000, 4100000, 4100000, 4100000, 4100000, 4100000, +}; + +/* Output: 1.8V, 3.0V, or 3.3V */ +static const int pf8x00_vsnvs_voltages[] = { + 0, 1800000, 3000000, 3300000, +}; + +static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *desc) +{ + return container_of(desc, struct pf8x00_regulator, desc); +} + +static void swxilim_select(const struct regulator_desc *desc, int ilim) +{ + struct pf8x00_regulator *data = desc_to_regulator(desc); + u8 ilim_sel; + + switch (ilim) { + case 2100: + ilim_sel = SWXILIM_2100_MA; + break; + case 2600: + ilim_sel = SWXILIM_2600_MA; + break; + case 3000: + ilim_sel = SWXILIM_3000_MA; + break; + case 4500: + ilim_sel = SWXILIM_4500_MA; + break; + default: + ilim_sel = SWXILIM_2100_MA; + break; + } + + data->ilim = ilim_sel; +} + +static int pf8x00_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct pf8x00_regulator *data = desc_to_regulator(desc); + struct pf8x00_chip *chip = config->driver_data; + int phase; + int val; + int ret; + + ret = of_property_read_u32(np, "nxp,ilim-ma", &val); + if (ret) + dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n", + desc->id - PF8X00_LDO4); + + swxilim_select(desc, val); + + ret = of_property_read_u32(np, "nxp,phase-shift", &val); + if (ret) { + dev_dbg(chip->dev, + "unspecified phase-shift for BUCK%d, use 0 degrees\n", + desc->id - PF8X00_LDO4); + val = PF8X00_SWXPHASE_DEFAULT; + } + + phase = val / 45; + if ((phase * 45) != val) { + dev_warn(config->dev, + "invalid phase_shift %d for BUCK%d, use 0 degrees\n", + (phase * 45), desc->id - PF8X00_LDO4); + phase = PF8X00_SWXPHASE_SHIFT; + } + + data->phase_shift = (phase >= 1) ? phase - 1 : PF8X00_SWXPHASE_SHIFT; + + return 0; +} + +static const struct regulator_ops pf8x00_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops pf8x00_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops pf8x00_vsnvs_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +#define PF8X00LDO(_id, _name, base, voltages) \ + [PF8X00_LDO ## _id] = { \ + .desc = { \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pf8x00_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PF8X00_LDO ## _id, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base) + LDO_RUN_VOLT, \ + .vsel_mask = 0xff, \ + .enable_reg = (base) + LDO_CONFIG2, \ + .enable_val = 0x2, \ + .disable_val = 0x0, \ + .enable_mask = 2, \ + }, \ + } + +#define PF8X00BUCK(_id, _name, base, voltages) \ + [PF8X00_BUCK ## _id] = { \ + .desc = { \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .of_parse_cb = pf8x00_of_parse_cb, \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pf8x00_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PF8X00_BUCK ## _id, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base) + SW_RUN_VOLT, \ + .vsel_mask = 0xff, \ + .enable_reg = (base) + SW_MODE1, \ + .enable_val = 0x3, \ + .disable_val = 0x0, \ + .enable_mask = 0x3, \ + .enable_time = 500, \ + }, \ + } + +#define PF8X00VSNVS(_name, base, voltages) \ + [PF8X00_VSNVS] = { \ + .desc = { \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pf8x00_vsnvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PF8X00_VSNVS, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base), \ + .vsel_mask = 0x3, \ + }, \ + } + +static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = { + PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages), + PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages), + PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages), + PF8X00LDO(4, "ldo4", PF8X00_LDO_BASE(PF8X00_LDO4), pf8x00_ldo_voltages), + PF8X00BUCK(1, "buck1", PF8X00_SW_BASE(PF8X00_BUCK1), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(2, "buck2", PF8X00_SW_BASE(PF8X00_BUCK2), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(3, "buck3", PF8X00_SW_BASE(PF8X00_BUCK3), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages), + PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages), + PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages), +}; + +static int pf8x00_identify(struct pf8x00_chip *chip) +{ + unsigned int value; + u8 dev_fam, dev_id; + const char *name = NULL; + int ret; + + ret = regmap_read(chip->regmap, PF8X00_DEVICEID, &value); + if (ret) { + dev_err(chip->dev, "failed to read chip family\n"); + return ret; + } + + dev_fam = value & PF8X00_DEVICE_FAM_MASK; + switch (dev_fam) { + case PF8X00_FAM: + break; + default: + dev_err(chip->dev, + "Chip 0x%x is not from PF8X00 family\n", dev_fam); + return ret; + } + + dev_id = value & PF8X00_DEVICE_ID_MASK; + switch (dev_id) { + case PF8100: + name = "PF8100"; + break; + case PF8121A: + name = "PF8121A"; + break; + case PF8200: + name = "PF8100"; + break; + default: + dev_err(chip->dev, "Unknown pf8x00 device id 0x%x\n", dev_id); + return -ENODEV; + } + + dev_info(chip->dev, "%s PMIC found.\n", name); + + return 0; +} + +static int pf8x00_i2c_probe(struct i2c_client *client) +{ + struct regulator_config config = { NULL, }; + struct pf8x00_chip *chip; + int id; + int ret; + + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->dev = &client->dev; + + chip->regmap = devm_regmap_init_i2c(client, &pf8x00_regmap_config); + if (IS_ERR(chip->regmap)) { + ret = PTR_ERR(chip->regmap); + dev_err(&client->dev, + "regmap allocation failed with err %d\n", ret); + return ret; + } + + ret = pf8x00_identify(chip); + if (ret) + return ret; + + for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) { + struct pf8x00_regulator *data = &pf8x00_regulators_data[id]; + struct regulator_dev *rdev; + + config.dev = chip->dev; + config.driver_data = chip; + config.regmap = chip->regmap; + + rdev = devm_regulator_register(&client->dev, &data->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&client->dev, + "failed to register %s regulator\n", data->desc.name); + return PTR_ERR(rdev); + } + + if ((id >= PF8X00_BUCK1) && (id <= PF8X00_BUCK7)) { + u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2; + + regmap_update_bits(chip->regmap, reg, + PF8X00_SWXPHASE_MASK, + data->phase_shift); + + regmap_update_bits(chip->regmap, reg, + PF8X00_SWXILIM_MASK, + data->ilim << PF8X00_SWXILIM_SHIFT); + } + } + + return 0; +} + +static const struct of_device_id pf8x00_dt_ids[] = { + { .compatible = "nxp,pf8x00",}, + { } +}; +MODULE_DEVICE_TABLE(of, pf8x00_dt_ids); + +static const struct i2c_device_id pf8x00_i2c_id[] = { + { "pf8x00", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, pf8x00_i2c_id); + +static struct i2c_driver pf8x00_regulator_driver = { + .id_table = pf8x00_i2c_id, + .driver = { + .name = "pf8x00", + .of_match_table = pf8x00_dt_ids, + }, + .probe_new = pf8x00_i2c_probe, +}; +module_i2c_driver(pf8x00_regulator_driver); + +MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); +MODULE_AUTHOR("Troy Kisky <troy.kisky@boundarydevices.com>"); +MODULE_DESCRIPTION("Regulator Driver for NXP's PF8100/PF8121A/PF8200 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 01a12cfcea7c..d60d7d1b7fa2 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -105,15 +105,6 @@ static const int pfuze3000_sw2hi[] = { 2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000, }; -static const struct i2c_device_id pfuze_device_id[] = { - {.name = "pfuze100", .driver_data = PFUZE100}, - {.name = "pfuze200", .driver_data = PFUZE200}, - {.name = "pfuze3000", .driver_data = PFUZE3000}, - {.name = "pfuze3001", .driver_data = PFUZE3001}, - { } -}; -MODULE_DEVICE_TABLE(i2c, pfuze_device_id); - static const struct of_device_id pfuze_dt_ids[] = { { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, @@ -440,7 +431,6 @@ static struct pfuze_regulator pfuze3001_regulators[] = { PFUZE100_VGEN_REG(PFUZE3001, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; -#ifdef CONFIG_OF /* PFUZE100 */ static struct of_regulator_match pfuze100_matches[] = { { .name = "sw1ab", }, @@ -578,22 +568,6 @@ static inline struct device_node *match_of_node(int index) { return pfuze_matches[index].of_node; } -#else -static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) -{ - return 0; -} - -static inline struct regulator_init_data *match_init_data(int index) -{ - return NULL; -} - -static inline struct device_node *match_of_node(int index) -{ - return NULL; -} -#endif static struct pfuze_chip *syspm_pfuze_chip; @@ -708,8 +682,6 @@ static int pfuze100_regulator_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pfuze_chip *pfuze_chip; - struct pfuze_regulator_platform_data *pdata = - dev_get_platdata(&client->dev); struct regulator_config config = { }; int i, ret; const struct of_device_id *match; @@ -802,10 +774,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, desc = &pfuze_chip->regulator_descs[i].desc; - if (pdata) - init_data = pdata->init_data[i]; - else - init_data = match_init_data(i); + init_data = match_init_data(i); /* SW2~SW4 high bit check and modify the voltage value table */ if (i >= sw_check_start && i <= sw_check_end) { @@ -879,7 +848,6 @@ static int pfuze100_regulator_remove(struct i2c_client *client) } static struct i2c_driver pfuze_driver = { - .id_table = pfuze_device_id, .driver = { .name = "pfuze100-regulator", .of_match_table = pfuze_dt_ids, diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index d488325499a9..fe030ec4b7db 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -865,6 +865,60 @@ static const struct rpmh_vreg_init_data pm8150l_vreg_data[] = { {}, }; +static const struct rpmh_vreg_init_data pm8350_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"), + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"), + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"), + RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps510, "vdd-s8"), + RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps510, "vdd-s9"), + RPMH_VREG("smps10", "smp%s10", &pmic5_hfsmps510, "vdd-s10"), + RPMH_VREG("smps11", "smp%s11", &pmic5_hfsmps510, "vdd-s11"), + RPMH_VREG("smps12", "smp%s12", &pmic5_hfsmps510, "vdd-s12"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l4"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l7"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l5"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l3-l5"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9-l10"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l2-l7"), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l8"), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9-l10"), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l6-l9-l10"), + {}, +}; + +static const struct rpmh_vreg_init_data pm8350c_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps510, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps510, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps510, "vdd-s5"), + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"), + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps510, "vdd-s7"), + RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps510, "vdd-s8"), + RPMH_VREG("smps9", "smp%s9", &pmic5_ftsmps510, "vdd-s9"), + RPMH_VREG("smps10", "smp%s10", &pmic5_ftsmps510, "vdd-s10"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo_lv, "vdd-l1-l12"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo_lv, "vdd-l2-l8"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l6-l9-l11"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l2-l8"), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l6-l9-l11"), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l10"), + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l6-l9-l11"), + RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo_lv, "vdd-l1-l12"), + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l3-l4-l5-l7-l13"), + RPMH_VREG("bob", "bob%s1", &pmic5_bob, "vdd-bob"), + {}, +}; + static const struct rpmh_vreg_init_data pm8009_vreg_data[] = { RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"), RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515, "vdd-s2"), @@ -930,6 +984,33 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = { {}, }; +static const struct rpmh_vreg_init_data pmx55_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps510, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps510, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_hfsmps510, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_hfsmps510, "vdd-s5"), + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps510, "vdd-s6"), + RPMH_VREG("smps7", "smp%s7", &pmic5_hfsmps510, "vdd-s7"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l2"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l1-l2"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3-l9"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4-l12"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_nldo, "vdd-l7-l8"), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l7-l8"), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l3-l9"), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_pldo, "vdd-l10-l11-l13"), + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l10-l11-l13"), + RPMH_VREG("ldo12", "ldo%s12", &pmic5_nldo, "vdd-l4-l12"), + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l10-l11-l13"), + RPMH_VREG("ldo14", "ldo%s14", &pmic5_nldo, "vdd-l14"), + RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, "vdd-l15"), + RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l16"), + {}, +}; + static int rpmh_regulator_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -985,6 +1066,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .data = pm8150l_vreg_data, }, { + .compatible = "qcom,pm8350-rpmh-regulators", + .data = pm8350_vreg_data, + }, + { + .compatible = "qcom,pm8350c-rpmh-regulators", + .data = pm8350c_vreg_data, + }, + { .compatible = "qcom,pm8998-rpmh-regulators", .data = pm8998_vreg_data, }, @@ -1000,6 +1089,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .compatible = "qcom,pm6150l-rpmh-regulators", .data = pm6150l_vreg_data, }, + { + .compatible = "qcom,pmx55-rpmh-regulators", + .data = pmx55_vreg_data, + }, {} }; MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table); diff --git a/drivers/regulator/scmi-regulator.c b/drivers/regulator/scmi-regulator.c new file mode 100644 index 000000000000..0e8b3caa8146 --- /dev/null +++ b/drivers/regulator/scmi-regulator.c @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// System Control and Management Interface (SCMI) based regulator driver +// +// Copyright (C) 2020 ARM Ltd. +// +// Implements a regulator driver on top of the SCMI Voltage Protocol. +// +// The ARM SCMI Protocol aims in general to hide as much as possible all the +// underlying operational details while providing an abstracted interface for +// its users to operate upon: as a consequence the resulting operational +// capabilities and configurability of this regulator device are much more +// limited than the ones usually available on a standard physical regulator. +// +// The supported SCMI regulator ops are restricted to the bare minimum: +// +// - 'status_ops': enable/disable/is_enabled +// - 'voltage_ops': get_voltage_sel/set_voltage_sel +// list_voltage/map_voltage +// +// Each SCMI regulator instance is associated, through the means of a proper DT +// entry description, to a specific SCMI Voltage Domain. + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/linear_range.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h> +#include <linux/scmi_protocol.h> +#include <linux/slab.h> +#include <linux/types.h> + +struct scmi_regulator { + u32 id; + struct scmi_device *sdev; + struct regulator_dev *rdev; + struct device_node *of_node; + struct regulator_desc desc; + struct regulator_config conf; +}; + +struct scmi_regulator_info { + int num_doms; + struct scmi_regulator **sregv; +}; + +static int scmi_reg_enable(struct regulator_dev *rdev) +{ + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + const struct scmi_handle *handle = sreg->sdev->handle; + + return handle->voltage_ops->config_set(handle, sreg->id, + SCMI_VOLTAGE_ARCH_STATE_ON); +} + +static int scmi_reg_disable(struct regulator_dev *rdev) +{ + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + const struct scmi_handle *handle = sreg->sdev->handle; + + return handle->voltage_ops->config_set(handle, sreg->id, + SCMI_VOLTAGE_ARCH_STATE_OFF); +} + +static int scmi_reg_is_enabled(struct regulator_dev *rdev) +{ + int ret; + u32 config; + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + const struct scmi_handle *handle = sreg->sdev->handle; + + ret = handle->voltage_ops->config_get(handle, sreg->id, + &config); + if (ret) { + dev_err(&sreg->sdev->dev, + "Error %d reading regulator %s status.\n", + ret, sreg->desc.name); + return ret; + } + + return config & SCMI_VOLTAGE_ARCH_STATE_ON; +} + +static int scmi_reg_get_voltage_sel(struct regulator_dev *rdev) +{ + int ret; + s32 volt_uV; + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + const struct scmi_handle *handle = sreg->sdev->handle; + + ret = handle->voltage_ops->level_get(handle, sreg->id, &volt_uV); + if (ret) + return ret; + + return sreg->desc.ops->map_voltage(rdev, volt_uV, volt_uV); +} + +static int scmi_reg_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + s32 volt_uV; + struct scmi_regulator *sreg = rdev_get_drvdata(rdev); + const struct scmi_handle *handle = sreg->sdev->handle; + + volt_uV = sreg->desc.ops->list_voltage(rdev, selector); + if (volt_uV <= 0) + return -EINVAL; + + return handle->voltage_ops->level_set(handle, sreg->id, 0x0, volt_uV); +} + +static const struct regulator_ops scmi_reg_fixed_ops = { + .enable = scmi_reg_enable, + .disable = scmi_reg_disable, + .is_enabled = scmi_reg_is_enabled, +}; + +static const struct regulator_ops scmi_reg_linear_ops = { + .enable = scmi_reg_enable, + .disable = scmi_reg_disable, + .is_enabled = scmi_reg_is_enabled, + .get_voltage_sel = scmi_reg_get_voltage_sel, + .set_voltage_sel = scmi_reg_set_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, +}; + +static const struct regulator_ops scmi_reg_discrete_ops = { + .enable = scmi_reg_enable, + .disable = scmi_reg_disable, + .is_enabled = scmi_reg_is_enabled, + .get_voltage_sel = scmi_reg_get_voltage_sel, + .set_voltage_sel = scmi_reg_set_voltage_sel, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, +}; + +static int +scmi_config_linear_regulator_mappings(struct scmi_regulator *sreg, + const struct scmi_voltage_info *vinfo) +{ + s32 delta_uV; + + /* + * Note that SCMI voltage domains describable by linear ranges + * (segments) {low, high, step} are guaranteed to come in one single + * triplet by the SCMI Voltage Domain protocol support itself. + */ + + delta_uV = (vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_HIGH] - + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW]); + + /* Rule out buggy negative-intervals answers from fw */ + if (delta_uV < 0) { + dev_err(&sreg->sdev->dev, + "Invalid volt-range %d-%duV for domain %d\n", + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW], + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_HIGH], + sreg->id); + return -EINVAL; + } + + if (!delta_uV) { + /* Just one fixed voltage exposed by SCMI */ + sreg->desc.fixed_uV = + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW]; + sreg->desc.n_voltages = 1; + sreg->desc.ops = &scmi_reg_fixed_ops; + } else { + /* One simple linear mapping. */ + sreg->desc.min_uV = + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_LOW]; + sreg->desc.uV_step = + vinfo->levels_uv[SCMI_VOLTAGE_SEGMENT_STEP]; + sreg->desc.linear_min_sel = 0; + sreg->desc.n_voltages = delta_uV / sreg->desc.uV_step; + sreg->desc.ops = &scmi_reg_linear_ops; + } + + return 0; +} + +static int +scmi_config_discrete_regulator_mappings(struct scmi_regulator *sreg, + const struct scmi_voltage_info *vinfo) +{ + /* Discrete non linear levels are mapped to volt_table */ + sreg->desc.n_voltages = vinfo->num_levels; + + if (sreg->desc.n_voltages > 1) { + sreg->desc.volt_table = (const unsigned int *)vinfo->levels_uv; + sreg->desc.ops = &scmi_reg_discrete_ops; + } else { + sreg->desc.fixed_uV = vinfo->levels_uv[0]; + sreg->desc.ops = &scmi_reg_fixed_ops; + } + + return 0; +} + +static int scmi_regulator_common_init(struct scmi_regulator *sreg) +{ + int ret; + const struct scmi_handle *handle = sreg->sdev->handle; + struct device *dev = &sreg->sdev->dev; + const struct scmi_voltage_info *vinfo; + + vinfo = handle->voltage_ops->info_get(handle, sreg->id); + if (!vinfo) { + dev_warn(dev, "Failure to get voltage domain %d\n", + sreg->id); + return -ENODEV; + } + + /* + * Regulator framework does not fully support negative voltages + * so we discard any voltage domain reported as supporting negative + * voltages: as a consequence each levels_uv entry is guaranteed to + * be non-negative from here on. + */ + if (vinfo->negative_volts_allowed) { + dev_warn(dev, "Negative voltages NOT supported...skip %s\n", + sreg->of_node->full_name); + return -EOPNOTSUPP; + } + + sreg->desc.name = devm_kasprintf(dev, GFP_KERNEL, "%s", vinfo->name); + if (!sreg->desc.name) + return -ENOMEM; + + sreg->desc.id = sreg->id; + sreg->desc.type = REGULATOR_VOLTAGE; + sreg->desc.owner = THIS_MODULE; + sreg->desc.of_match_full_name = true; + sreg->desc.of_match = sreg->of_node->full_name; + sreg->desc.regulators_node = "regulators"; + if (vinfo->segmented) + ret = scmi_config_linear_regulator_mappings(sreg, vinfo); + else + ret = scmi_config_discrete_regulator_mappings(sreg, vinfo); + if (ret) + return ret; + + /* + * Using the scmi device here to have DT searched from Voltage + * protocol node down. + */ + sreg->conf.dev = dev; + + /* Store for later retrieval via rdev_get_drvdata() */ + sreg->conf.driver_data = sreg; + + return 0; +} + +static int process_scmi_regulator_of_node(struct scmi_device *sdev, + struct device_node *np, + struct scmi_regulator_info *rinfo) +{ + u32 dom, ret; + + ret = of_property_read_u32(np, "reg", &dom); + if (ret) + return ret; + + if (dom >= rinfo->num_doms) + return -ENODEV; + + if (rinfo->sregv[dom]) { + dev_err(&sdev->dev, + "SCMI Voltage Domain %d already in use. Skipping: %s\n", + dom, np->full_name); + return -EINVAL; + } + + rinfo->sregv[dom] = devm_kzalloc(&sdev->dev, + sizeof(struct scmi_regulator), + GFP_KERNEL); + if (!rinfo->sregv[dom]) + return -ENOMEM; + + rinfo->sregv[dom]->id = dom; + rinfo->sregv[dom]->sdev = sdev; + + /* get hold of good nodes */ + of_node_get(np); + rinfo->sregv[dom]->of_node = np; + + dev_dbg(&sdev->dev, + "Found SCMI Regulator entry -- OF node [%d] -> %s\n", + dom, np->full_name); + + return 0; +} + +static int scmi_regulator_probe(struct scmi_device *sdev) +{ + int d, ret, num_doms; + struct device_node *np, *child; + const struct scmi_handle *handle = sdev->handle; + struct scmi_regulator_info *rinfo; + + if (!handle || !handle->voltage_ops) + return -ENODEV; + + num_doms = handle->voltage_ops->num_domains_get(handle); + if (num_doms <= 0) { + if (!num_doms) { + dev_err(&sdev->dev, + "number of voltage domains invalid\n"); + num_doms = -EINVAL; + } else { + dev_err(&sdev->dev, + "failed to get voltage domains - err:%d\n", + num_doms); + } + + return num_doms; + } + + rinfo = devm_kzalloc(&sdev->dev, sizeof(*rinfo), GFP_KERNEL); + if (!rinfo) + return -ENOMEM; + + /* Allocate pointers array for all possible domains */ + rinfo->sregv = devm_kcalloc(&sdev->dev, num_doms, + sizeof(void *), GFP_KERNEL); + if (!rinfo->sregv) + return -ENOMEM; + + rinfo->num_doms = num_doms; + + /* + * Start collecting into rinfo->sregv possibly good SCMI Regulators as + * described by a well-formed DT entry and associated with an existing + * plausible SCMI Voltage Domain number, all belonging to this SCMI + * platform instance node (handle->dev->of_node). + */ + np = of_find_node_by_name(handle->dev->of_node, "regulators"); + for_each_child_of_node(np, child) { + ret = process_scmi_regulator_of_node(sdev, child, rinfo); + /* abort on any mem issue */ + if (ret == -ENOMEM) + return ret; + } + + /* + * Register a regulator for each valid regulator-DT-entry that we + * can successfully reach via SCMI and has a valid associated voltage + * domain. + */ + for (d = 0; d < num_doms; d++) { + struct scmi_regulator *sreg = rinfo->sregv[d]; + + /* Skip empty slots */ + if (!sreg) + continue; + + ret = scmi_regulator_common_init(sreg); + /* Skip invalid voltage domains */ + if (ret) + continue; + + sreg->rdev = devm_regulator_register(&sdev->dev, &sreg->desc, + &sreg->conf); + if (IS_ERR(sreg->rdev)) { + sreg->rdev = NULL; + continue; + } + + dev_info(&sdev->dev, + "Regulator %s registered for domain [%d]\n", + sreg->desc.name, sreg->id); + } + + dev_set_drvdata(&sdev->dev, rinfo); + + return 0; +} + +static void scmi_regulator_remove(struct scmi_device *sdev) +{ + int d; + struct scmi_regulator_info *rinfo; + + rinfo = dev_get_drvdata(&sdev->dev); + if (!rinfo) + return; + + for (d = 0; d < rinfo->num_doms; d++) { + if (!rinfo->sregv[d]) + continue; + of_node_put(rinfo->sregv[d]->of_node); + } +} + +static const struct scmi_device_id scmi_regulator_id_table[] = { + { SCMI_PROTOCOL_VOLTAGE, "regulator" }, + { }, +}; +MODULE_DEVICE_TABLE(scmi, scmi_regulator_id_table); + +static struct scmi_driver scmi_drv = { + .name = "scmi-regulator", + .probe = scmi_regulator_probe, + .remove = scmi_regulator_remove, + .id_table = scmi_regulator_id_table, +}; + +module_scmi_driver(scmi_drv); + +MODULE_AUTHOR("Cristian Marussi <cristian.marussi@arm.com>"); +MODULE_DESCRIPTION("ARM SCMI regulator driver"); +MODULE_LICENSE("GPL v2"); |