Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net

Jeff Kirsher says:

====================
This series contains fixes/updates to ixgbe only.  There are three
PTP fixes, polling loop fix and the addition of a device id (X540-AT1).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 112 insertions, 114 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index 18bf08c9d7a4..1077cb2b38db 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -1099,7 +1099,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
 		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
 		                   IXGBE_FDIRCTRL_INIT_DONE)
 			break;
-		udelay(10);
+		usleep_range(1000, 2000);
 	}
 	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
 		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 90e41db3cb69..dbf37e4a45fd 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -70,6 +70,7 @@ static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 
 	switch (hw->device_id) {
 	case IXGBE_DEV_ID_X540T:
+	case IXGBE_DEV_ID_X540T1:
 		return 0;
 	case IXGBE_DEV_ID_82599_T3_LOM:
 		return 0;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 4104ea25d818..56b20d17d0e4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2690,10 +2690,7 @@ static int ixgbe_get_ts_info(struct net_device *dev,
 			(1 << HWTSTAMP_FILTER_NONE) |
 			(1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
 			(1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
-			(1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
-			(1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
-			(1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
-			(1 << HWTSTAMP_FILTER_SOME);
+			(1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
 		break;
 #endif /* CONFIG_IXGBE_PTP */
 	default:
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 868af6938219..fa3d552e1f4a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -114,6 +114,7 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 },
 	/* required last entry */
 	{0, }
 };
@@ -2322,6 +2323,12 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
 	default:
 		break;
 	}
+
+#ifdef CONFIG_IXGBE_PTP
+	if (adapter->hw.mac.type == ixgbe_mac_X540)
+		mask |= IXGBE_EIMS_TIMESYNC;
+#endif
+
 	if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) &&
 	    !(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT))
 		mask |= IXGBE_EIMS_FLOW_DIR;
@@ -2385,8 +2392,10 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data)
 	}
 
 	ixgbe_check_fan_failure(adapter, eicr);
+
 #ifdef CONFIG_IXGBE_PTP
-	ixgbe_ptp_check_pps_event(adapter, eicr);
+	if (unlikely(eicr & IXGBE_EICR_TIMESYNC))
+		ixgbe_ptp_check_pps_event(adapter, eicr);
 #endif
 
 	/* re-enable the original interrupt state, no lsc, no queues */
@@ -2580,7 +2589,8 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 
 	ixgbe_check_fan_failure(adapter, eicr);
 #ifdef CONFIG_IXGBE_PTP
-	ixgbe_ptp_check_pps_event(adapter, eicr);
+	if (unlikely(eicr & IXGBE_EICR_TIMESYNC))
+		ixgbe_ptp_check_pps_event(adapter, eicr);
 #endif
 
 	/* would disable interrupts here but EIAM disabled it */
@@ -7045,6 +7055,7 @@ int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
 		is_wol_supported = 1;
 		break;
 	case IXGBE_DEV_ID_X540T:
+	case IXGBE_DEV_ID_X540T1:
 		/* check eeprom to see if enabled wol */
 		if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
 		    ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
index 39881cb17a4b..d9291316ee9f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c
@@ -106,6 +106,83 @@ static struct sock_filter ptp_filter[] = {
 };
 
 /**
+ * ixgbe_ptp_setup_sdp
+ * @hw: the hardware private structure
+ *
+ * this function enables or disables the clock out feature on SDP0 for
+ * the X540 device. It will create a 1second periodic output that can
+ * be used as the PPS (via an interrupt).
+ *
+ * It calculates when the systime will be on an exact second, and then
+ * aligns the start of the PPS signal to that value. The shift is
+ * necessary because it can change based on the link speed.
+ */
+static void ixgbe_ptp_setup_sdp(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int shift = adapter->cc.shift;
+	u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh, rem;
+	u64 ns = 0, clock_edge = 0;
+
+	if ((adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED) &&
+	    (hw->mac.type == ixgbe_mac_X540)) {
+
+		/* disable the pin first */
+		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
+		IXGBE_WRITE_FLUSH(hw);
+
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+		/*
+		 * enable the SDP0 pin as output, and connected to the
+		 * native function for Timesync (ClockOut)
+		 */
+		esdp |= (IXGBE_ESDP_SDP0_DIR |
+			 IXGBE_ESDP_SDP0_NATIVE);
+
+		/*
+		 * enable the Clock Out feature on SDP0, and allow
+		 * interrupts to occur when the pin changes
+		 */
+		tsauxc = (IXGBE_TSAUXC_EN_CLK |
+			  IXGBE_TSAUXC_SYNCLK |
+			  IXGBE_TSAUXC_SDP0_INT);
+
+		/* clock period (or pulse length) */
+		clktiml = (u32)(NSECS_PER_SEC << shift);
+		clktimh = (u32)((NSECS_PER_SEC << shift) >> 32);
+
+		/*
+		 * Account for the cyclecounter wrap-around value by
+		 * using the converted ns value of the current time to
+		 * check for when the next aligned second would occur.
+		 */
+		clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
+		clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
+		ns = timecounter_cyc2time(&adapter->tc, clock_edge);
+
+		div_u64_rem(ns, NSECS_PER_SEC, &rem);
+		clock_edge += ((NSECS_PER_SEC - (u64)rem) << shift);
+
+		/* specify the initial clock start time */
+		trgttiml = (u32)clock_edge;
+		trgttimh = (u32)(clock_edge >> 32);
+
+		IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml);
+		IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh);
+		IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml);
+		IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh);
+
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc);
+	} else {
+		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
+	}
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
  * ixgbe_ptp_read - read raw cycle counter (to be used by time counter)
  * @cc: the cyclecounter structure
  *
@@ -198,6 +275,9 @@ static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
 			 now);
 
 	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	ixgbe_ptp_setup_sdp(adapter);
+
 	return 0;
 }
 
@@ -251,6 +331,7 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp,
 	timecounter_init(&adapter->tc, &adapter->cc, ns);
 	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
 
+	ixgbe_ptp_setup_sdp(adapter);
 	return 0;
 }
 
@@ -281,8 +362,9 @@ static int ixgbe_ptp_enable(struct ptp_clock_info *ptp,
 			if (on)
 				adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED;
 			else
-				adapter->flags2 &=
-					~IXGBE_FLAG2_PTP_PPS_ENABLED;
+				adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED;
+
+			ixgbe_ptp_setup_sdp(adapter);
 			return 0;
 		default:
 			break;
@@ -305,109 +387,15 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct ptp_clock_event event;
 
-	event.type = PTP_CLOCK_PPS;
-
-	/* Make sure ptp clock is valid, and PPS event enabled */
-	if (!adapter->ptp_clock ||
-	    !(adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED))
-		return;
-
-	if (unlikely(eicr & IXGBE_EICR_TIMESYNC)) {
-		switch (hw->mac.type) {
-		case ixgbe_mac_X540:
-			ptp_clock_event(adapter->ptp_clock, &event);
-			break;
-		default:
-			break;
-		}
-	}
-}
-
-/**
- * ixgbe_ptp_enable_sdp
- * @hw: the hardware private structure
- * @shift: the clock shift for calculating nanoseconds
- *
- * this function enables the clock out feature on the sdp0 for the
- * X540 device. It will create a 1second periodic output that can be
- * used as the PPS (via an interrupt).
- *
- * It calculates when the systime will be on an exact second, and then
- * aligns the start of the PPS signal to that value. The shift is
- * necessary because it can change based on the link speed.
- */
-static void ixgbe_ptp_enable_sdp(struct ixgbe_hw *hw, int shift)
-{
-	u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh;
-	u64 clock_edge = 0;
-	u32 rem;
-
 	switch (hw->mac.type) {
 	case ixgbe_mac_X540:
-		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
-
-		/*
-		 * enable the SDP0 pin as output, and connected to the native
-		 * function for Timesync (ClockOut)
-		 */
-		esdp |= (IXGBE_ESDP_SDP0_DIR |
-			 IXGBE_ESDP_SDP0_NATIVE);
-
-		/*
-		 * enable the Clock Out feature on SDP0, and allow interrupts
-		 * to occur when the pin changes
-		 */
-		tsauxc = (IXGBE_TSAUXC_EN_CLK |
-			  IXGBE_TSAUXC_SYNCLK |
-			  IXGBE_TSAUXC_SDP0_INT);
-
-		/* clock period (or pulse length) */
-		clktiml = (u32)(NSECS_PER_SEC << shift);
-		clktimh = (u32)((NSECS_PER_SEC << shift) >> 32);
-
-		clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
-		clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
-
-		/*
-		 * account for the fact that we can't do u64 division
-		 * with remainder, by converting the clock values into
-		 * nanoseconds first
-		 */
-		clock_edge >>= shift;
-		div_u64_rem(clock_edge, NSECS_PER_SEC, &rem);
-		clock_edge += (NSECS_PER_SEC - rem);
-		clock_edge <<= shift;
-
-		/* specify the initial clock start time */
-		trgttiml = (u32)clock_edge;
-		trgttimh = (u32)(clock_edge >> 32);
-
-		IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml);
-		IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh);
-		IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml);
-		IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh);
-
-		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
-		IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc);
-
-		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EICR_TIMESYNC);
+		ptp_clock_event(adapter->ptp_clock, &event);
 		break;
 	default:
 		break;
 	}
 }
 
-/**
- * ixgbe_ptp_disable_sdp
- * @hw: the private hardware structure
- *
- * this function disables the auxiliary SDP clock out feature
- */
-static void ixgbe_ptp_disable_sdp(struct ixgbe_hw *hw)
-{
-	IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EICR_TIMESYNC);
-	IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0);
-}
 
 /**
  * ixgbe_ptp_overflow_check - delayed work to detect SYSTIME overflow
@@ -822,9 +810,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 	if (adapter->cycle_speed == cycle_speed && timinca)
 		return;
 
-	/* disable the SDP clock out */
-	ixgbe_ptp_disable_sdp(hw);
-
 	/**
 	 * Scale the NIC cycle counter by a large factor so that
 	 * relatively small corrections to the frequency can be added
@@ -877,10 +862,6 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 	IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000);
 	IXGBE_WRITE_FLUSH(hw);
 
-	/* now that the shift has been calculated and the systime
-	 * registers reset, (re-)enable the Clock out feature*/
-	ixgbe_ptp_enable_sdp(hw, shift);
-
 	/* store the new cycle speed */
 	adapter->cycle_speed = cycle_speed;
 
@@ -901,6 +882,12 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
 			 ktime_to_ns(ktime_get_real()));
 
 	spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+	/*
+	 * Now that the shift has been calculated and the systime
+	 * registers reset, (re-)enable the Clock out feature
+	 */
+	ixgbe_ptp_setup_sdp(adapter);
 }
 
 /**
@@ -979,10 +966,11 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
  */
 void ixgbe_ptp_stop(struct ixgbe_adapter *adapter)
 {
-	ixgbe_ptp_disable_sdp(&adapter->hw);
-
 	/* stop the overflow check task */
-	adapter->flags2 &= ~IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED;
+	adapter->flags2 &= ~(IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED |
+			     IXGBE_FLAG2_PTP_PPS_ENABLED);
+
+	ixgbe_ptp_setup_sdp(adapter);
 
 	if (adapter->ptp_clock) {
 		ptp_clock_unregister(adapter->ptp_clock);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 400f86a31174..0722f3368092 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -65,6 +65,7 @@
 #define IXGBE_DEV_ID_82599_LS            0x154F
 #define IXGBE_DEV_ID_X540T               0x1528
 #define IXGBE_DEV_ID_82599_SFP_SF_QP     0x154A
+#define IXGBE_DEV_ID_X540T1              0x1560
 
 /* VF Device IDs */
 #define IXGBE_DEV_ID_82599_VF           0x10ED