trivial: fix typo "for for" in multiple files

trivial: fix typo "for for" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

8 files changed, 9 insertions, 9 deletions

diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 871c13b4c148..12f355cafdbe 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -286,7 +286,7 @@ enum scrub_type {
  *			is irrespective of the memory devices being mounted
  *			on both sides of the memory stick.
  *
- * Socket set:		All of the memory sticks that are required for for
+ * Socket set:		All of the memory sticks that are required for
  *			a single memory access or all of the memory sticks
  *			spanned by a chip-select row.  A single socket set
  *			has two chip-select rows and if double-sided sticks
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 02831ad070b8..4bd39c8af80f 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -809,7 +809,7 @@ static int ipath_setup_ht_reset(struct ipath_devdata *dd)
  * errors.  We only bother to do this at load time, because it's OK if
  * it happened before we were loaded (first time after boot/reset),
  * but any time after that, it's fatal anyway.  Also need to not check
- * for for upper byte errors if we are in 8 bit mode, so figure out
+ * for upper byte errors if we are in 8 bit mode, so figure out
  * our width.  For now, at least, also complain if it's 8 bit.
  */
 static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 7188c59a76ff..adb1e8c36b46 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -761,7 +761,7 @@ isdn_getnum(char **p)
  * Be aware that this is not an atomic operation when sleep != 0, even though 
  * interrupts are turned off! Well, like that we are currently only called
  * on behalf of a read system call on raw device files (which are documented
- * to be dangerous and for for debugging purpose only). The inode semaphore
+ * to be dangerous and for debugging purpose only). The inode semaphore
  * takes care that this is not called for the same minor device number while
  * we are sleeping, but access is not serialized against simultaneous read()
  * from the corresponding ttyI device. Can other ugly events, like changes
@@ -873,7 +873,7 @@ isdn_readbchan(int di, int channel, u_char * buf, u_char * fp, int len, wait_que
  * Be aware that this is not an atomic operation when sleep != 0, even though
  * interrupts are turned off! Well, like that we are currently only called
  * on behalf of a read system call on raw device files (which are documented
- * to be dangerous and for for debugging purpose only). The inode semaphore
+ * to be dangerous and for debugging purpose only). The inode semaphore
  * takes care that this is not called for the same minor device number while
  * we are sleeping, but access is not serialized against simultaneous read()
  * from the corresponding ttyI device. Can other ugly events, like changes
diff --git a/drivers/md/md.h b/drivers/md/md.h
index f8fc188bc762..f55d2ff95133 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -201,7 +201,7 @@ struct mddev_s
 	 * INTR:     resync needs to be aborted for some reason
 	 * DONE:     thread is done and is waiting to be reaped
 	 * REQUEST:  user-space has requested a sync (used with SYNC)
-	 * CHECK:    user-space request for for check-only, no repair
+	 * CHECK:    user-space request for check-only, no repair
 	 * RESHAPE:  A reshape is happening
 	 *
 	 * If neither SYNC or RESHAPE are set, then it is a recovery.
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index 0695be14cf91..aa76cbada5e2 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -3122,7 +3122,7 @@
    The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
    header pointer. */
 #define TCM_REG_XX_TABLE					 0x50240
-/* [RW 4] Load value for for cfc ac credit cnt. */
+/* [RW 4] Load value for cfc ac credit cnt. */
 #define TM_REG_CFC_AC_CRDCNT_VAL				 0x164208
 /* [RW 4] Load value for cfc cld credit cnt. */
 #define TM_REG_CFC_CLD_CRDCNT_VAL				 0x164210
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index bc98e7f69ee9..ede937ee50c7 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -72,7 +72,7 @@ static int rionet_check = 0;
 static int rionet_capable = 1;
 
 /*
- * This is a fast lookup table for for translating TX
+ * This is a fast lookup table for translating TX
  * Ethernet packets into a destination RIO device. It
  * could be made into a hash table to save memory depending
  * on system trade-offs.
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index c2f1b7df918c..b5b83c43898a 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -242,7 +242,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	 * System suspend currently expects to be able to suspend the entire
 	 * device tree, device-at-a-time.  If we failed selective suspend
 	 * reports, system suspend would fail; so the root hub code must claim
-	 * success.  That's lying to usbcore, and it matters for for runtime
+	 * success.  That's lying to usbcore, and it matters for runtime
 	 * PM scenarios with selective suspend and remote wakeup...
 	 */
 	if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 2bfff30f4704..48b9e889a18b 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -37,7 +37,7 @@ typedef __u16 __bitwise __hc16;
 #define __hc16	__le16
 #endif
 
-/* statistics can be kept for for tuning/monitoring */
+/* statistics can be kept for tuning/monitoring */
 struct ehci_stats {
 	/* irq usage */
 	unsigned long		normal;