summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-09-24 20:14:26 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-09-24 20:14:26 -0700
commitced255c0c5fb9ab52c9465982f23b1c14005ef8b (patch)
treedfe7c308312ca57a612fc687a31d3a6a6e6ea3f0 /drivers
parent4401555a98601a3de7cc876ceeac1d5d09f617e6 (diff)
parent97584d1838b7e2545c3b10aacef3327fcaa9531b (diff)
downloadlinux-ced255c0c5fb9ab52c9465982f23b1c14005ef8b.tar.bz2
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui: - Power allocator governor changes to allow binding on thermal zones with missing power estimates information. From Javi Merino. - Add compile test flags on thermal drivers that allow it without producing compilation errors. From Eduardo Valentin. - Fixes around memory allocation on cpu_cooling. From Javi Merino. - Fix on db8500 cpufreq code to allow autoload. From Luis de Bethencourt. - Maintainer entries for cpu cooling device * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: power_allocator: exit early if there are no cooling devices thermal: power_allocator: don't require tzp to be present for the thermal zone thermal: power_allocator: relax the requirement of two passive trip points thermal: power_allocator: relax the requirement of a sustainable_power in tzp thermal: Add a function to get the minimum power thermal: cpu_cooling: free power table on error or when unregistering thermal: cpu_cooling: don't call kcalloc() under rcu_read_lock thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driver thermal: cpu_cooling: Add MAINTAINERS entry thermal: ti-soc: Kconfig fix to avoid menu showing wrongly thermal: ti-soc: allow compile test thermal: qcom_spmi: allow compile test thermal: exynos: allow compile test thermal: armada: allow compile test thermal: dove: allow compile test thermal: kirkwood: allow compile test thermal: rockchip: allow compile test thermal: spear: allow compile test thermal: hisi: allow compile test thermal: Fix thermal_zone_of_sensor_register to match documentation
Diffstat (limited to 'drivers')
-rw-r--r--drivers/thermal/Kconfig17
-rw-r--r--drivers/thermal/cpu_cooling.c52
-rw-r--r--drivers/thermal/db8500_cpufreq_cooling.c1
-rw-r--r--drivers/thermal/power_allocator.c243
-rw-r--r--drivers/thermal/thermal_core.c28
-rw-r--r--drivers/thermal/ti-soc-thermal/Kconfig8
6 files changed, 251 insertions, 98 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 039004400987..5aabc4bc0d75 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -163,7 +163,7 @@ config THERMAL_EMULATION
config HISI_THERMAL
tristate "Hisilicon thermal driver"
- depends on ARCH_HISI && CPU_THERMAL && OF
+ depends on (ARCH_HISI && CPU_THERMAL && OF) || COMPILE_TEST
help
Enable this to plug hisilicon's thermal sensor driver into the Linux
thermal framework. cpufreq is used as the cooling device to throttle
@@ -182,7 +182,7 @@ config IMX_THERMAL
config SPEAR_THERMAL
bool "SPEAr thermal sensor driver"
- depends on PLAT_SPEAR
+ depends on PLAT_SPEAR || COMPILE_TEST
depends on OF
help
Enable this to plug the SPEAr thermal sensor driver into the Linux
@@ -190,7 +190,7 @@ config SPEAR_THERMAL
config ROCKCHIP_THERMAL
tristate "Rockchip thermal driver"
- depends on ARCH_ROCKCHIP
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on RESET_CONTROLLER
help
Rockchip thermal driver provides support for Temperature sensor
@@ -208,7 +208,7 @@ config RCAR_THERMAL
config KIRKWOOD_THERMAL
tristate "Temperature sensor on Marvell Kirkwood SoCs"
- depends on MACH_KIRKWOOD
+ depends on MACH_KIRKWOOD || COMPILE_TEST
depends on OF
help
Support for the Kirkwood thermal sensor driver into the Linux thermal
@@ -216,7 +216,7 @@ config KIRKWOOD_THERMAL
config DOVE_THERMAL
tristate "Temperature sensor on Marvell Dove SoCs"
- depends on ARCH_DOVE || MACH_DOVE
+ depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
depends on OF
help
Support for the Dove thermal sensor driver in the Linux thermal
@@ -234,7 +234,7 @@ config DB8500_THERMAL
config ARMADA_THERMAL
tristate "Armada 370/XP thermal management"
- depends on ARCH_MVEBU
+ depends on ARCH_MVEBU || COMPILE_TEST
depends on OF
help
Enable this option if you want to have support for thermal management
@@ -349,11 +349,12 @@ config INTEL_PCH_THERMAL
programmable trip points and other information.
menu "Texas Instruments thermal drivers"
+depends on ARCH_HAS_BANDGAP || COMPILE_TEST
source "drivers/thermal/ti-soc-thermal/Kconfig"
endmenu
menu "Samsung thermal drivers"
-depends on ARCH_EXYNOS
+depends on ARCH_EXYNOS || COMPILE_TEST
source "drivers/thermal/samsung/Kconfig"
endmenu
@@ -364,7 +365,7 @@ endmenu
config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
- depends on OF && SPMI && IIO
+ depends on OF && (SPMI || COMPILE_TEST) && IIO
select REGMAP_SPMI
help
This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 620dcd405ff6..42c6f71bdcc1 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -262,7 +262,9 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
* efficiently. Power is stored in mW, frequency in KHz. The
* resulting table is in ascending order.
*
- * Return: 0 on success, -E* on error.
+ * Return: 0 on success, -EINVAL if there are no OPPs for any CPUs,
+ * -ENOMEM if we run out of memory or -EAGAIN if an OPP was
+ * added/enabled while the function was executing.
*/
static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device,
u32 capacitance)
@@ -273,8 +275,6 @@ static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device,
int num_opps = 0, cpu, i, ret = 0;
unsigned long freq;
- rcu_read_lock();
-
for_each_cpu(cpu, &cpufreq_device->allowed_cpus) {
dev = get_cpu_device(cpu);
if (!dev) {
@@ -284,24 +284,20 @@ static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device,
}
num_opps = dev_pm_opp_get_opp_count(dev);
- if (num_opps > 0) {
+ if (num_opps > 0)
break;
- } else if (num_opps < 0) {
- ret = num_opps;
- goto unlock;
- }
+ else if (num_opps < 0)
+ return num_opps;
}
- if (num_opps == 0) {
- ret = -EINVAL;
- goto unlock;
- }
+ if (num_opps == 0)
+ return -EINVAL;
power_table = kcalloc(num_opps, sizeof(*power_table), GFP_KERNEL);
- if (!power_table) {
- ret = -ENOMEM;
- goto unlock;
- }
+ if (!power_table)
+ return -ENOMEM;
+
+ rcu_read_lock();
for (freq = 0, i = 0;
opp = dev_pm_opp_find_freq_ceil(dev, &freq), !IS_ERR(opp);
@@ -309,6 +305,12 @@ static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device,
u32 freq_mhz, voltage_mv;
u64 power;
+ if (i >= num_opps) {
+ rcu_read_unlock();
+ ret = -EAGAIN;
+ goto free_power_table;
+ }
+
freq_mhz = freq / 1000000;
voltage_mv = dev_pm_opp_get_voltage(opp) / 1000;
@@ -326,17 +328,22 @@ static int build_dyn_power_table(struct cpufreq_cooling_device *cpufreq_device,
power_table[i].power = power;
}
- if (i == 0) {
+ rcu_read_unlock();
+
+ if (i != num_opps) {
ret = PTR_ERR(opp);
- goto unlock;
+ goto free_power_table;
}
cpufreq_device->cpu_dev = dev;
cpufreq_device->dyn_power_table = power_table;
cpufreq_device->dyn_power_table_entries = i;
-unlock:
- rcu_read_unlock();
+ return 0;
+
+free_power_table:
+ kfree(power_table);
+
return ret;
}
@@ -847,7 +854,7 @@ __cpufreq_cooling_register(struct device_node *np,
ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
if (ret) {
cool_dev = ERR_PTR(ret);
- goto free_table;
+ goto free_power_table;
}
snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
@@ -889,6 +896,8 @@ __cpufreq_cooling_register(struct device_node *np,
remove_idr:
release_idr(&cpufreq_idr, cpufreq_dev->id);
+free_power_table:
+ kfree(cpufreq_dev->dyn_power_table);
free_table:
kfree(cpufreq_dev->freq_table);
free_time_in_idle_timestamp:
@@ -1039,6 +1048,7 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
release_idr(&cpufreq_idr, cpufreq_dev->id);
+ kfree(cpufreq_dev->dyn_power_table);
kfree(cpufreq_dev->time_in_idle_timestamp);
kfree(cpufreq_dev->time_in_idle);
kfree(cpufreq_dev->freq_table);
diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c
index 607b62c7e611..e58bd0b658b5 100644
--- a/drivers/thermal/db8500_cpufreq_cooling.c
+++ b/drivers/thermal/db8500_cpufreq_cooling.c
@@ -72,6 +72,7 @@ static const struct of_device_id db8500_cpufreq_cooling_match[] = {
{ .compatible = "stericsson,db8500-cpufreq-cooling" },
{},
};
+MODULE_DEVICE_TABLE(of, db8500_cpufreq_cooling_match);
#endif
static struct platform_driver db8500_cpufreq_cooling_driver = {
diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c
index 9c8a7aad0252..7ff96270c933 100644
--- a/drivers/thermal/power_allocator.c
+++ b/drivers/thermal/power_allocator.c
@@ -24,6 +24,8 @@
#include "thermal_core.h"
+#define INVALID_TRIP -1
+
#define FRAC_BITS 10
#define int_to_frac(x) ((x) << FRAC_BITS)
#define frac_to_int(x) ((x) >> FRAC_BITS)
@@ -56,16 +58,21 @@ static inline s64 div_frac(s64 x, s64 y)
/**
* struct power_allocator_params - parameters for the power allocator governor
+ * @allocated_tzp: whether we have allocated tzp for this thermal zone and
+ * it needs to be freed on unbind
* @err_integral: accumulated error in the PID controller.
* @prev_err: error in the previous iteration of the PID controller.
* Used to calculate the derivative term.
* @trip_switch_on: first passive trip point of the thermal zone. The
* governor switches on when this trip point is crossed.
+ * If the thermal zone only has one passive trip point,
+ * @trip_switch_on should be INVALID_TRIP.
* @trip_max_desired_temperature: last passive trip point of the thermal
* zone. The temperature we are
* controlling for.
*/
struct power_allocator_params {
+ bool allocated_tzp;
s64 err_integral;
s32 prev_err;
int trip_switch_on;
@@ -73,6 +80,88 @@ struct power_allocator_params {
};
/**
+ * estimate_sustainable_power() - Estimate the sustainable power of a thermal zone
+ * @tz: thermal zone we are operating in
+ *
+ * For thermal zones that don't provide a sustainable_power in their
+ * thermal_zone_params, estimate one. Calculate it using the minimum
+ * power of all the cooling devices as that gives a valid value that
+ * can give some degree of functionality. For optimal performance of
+ * this governor, provide a sustainable_power in the thermal zone's
+ * thermal_zone_params.
+ */
+static u32 estimate_sustainable_power(struct thermal_zone_device *tz)
+{
+ u32 sustainable_power = 0;
+ struct thermal_instance *instance;
+ struct power_allocator_params *params = tz->governor_data;
+
+ list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+ struct thermal_cooling_device *cdev = instance->cdev;
+ u32 min_power;
+
+ if (instance->trip != params->trip_max_desired_temperature)
+ continue;
+
+ if (power_actor_get_min_power(cdev, tz, &min_power))
+ continue;
+
+ sustainable_power += min_power;
+ }
+
+ return sustainable_power;
+}
+
+/**
+ * estimate_pid_constants() - Estimate the constants for the PID controller
+ * @tz: thermal zone for which to estimate the constants
+ * @sustainable_power: sustainable power for the thermal zone
+ * @trip_switch_on: trip point number for the switch on temperature
+ * @control_temp: target temperature for the power allocator governor
+ * @force: whether to force the update of the constants
+ *
+ * This function is used to update the estimation of the PID
+ * controller constants in struct thermal_zone_parameters.
+ * Sustainable power is provided in case it was estimated. The
+ * estimated sustainable_power should not be stored in the
+ * thermal_zone_parameters so it has to be passed explicitly to this
+ * function.
+ *
+ * If @force is not set, the values in the thermal zone's parameters
+ * are preserved if they are not zero. If @force is set, the values
+ * in thermal zone's parameters are overwritten.
+ */
+static void estimate_pid_constants(struct thermal_zone_device *tz,
+ u32 sustainable_power, int trip_switch_on,
+ int control_temp, bool force)
+{
+ int ret;
+ int switch_on_temp;
+ u32 temperature_threshold;
+
+ ret = tz->ops->get_trip_temp(tz, trip_switch_on, &switch_on_temp);
+ if (ret)
+ switch_on_temp = 0;
+
+ temperature_threshold = control_temp - switch_on_temp;
+
+ if (!tz->tzp->k_po || force)
+ tz->tzp->k_po = int_to_frac(sustainable_power) /
+ temperature_threshold;
+
+ if (!tz->tzp->k_pu || force)
+ tz->tzp->k_pu = int_to_frac(2 * sustainable_power) /
+ temperature_threshold;
+
+ if (!tz->tzp->k_i || force)
+ tz->tzp->k_i = int_to_frac(10) / 1000;
+ /*
+ * The default for k_d and integral_cutoff is 0, so we can
+ * leave them as they are.
+ */
+}
+
+/**
* pid_controller() - PID controller
* @tz: thermal zone we are operating in
* @current_temp: the current temperature in millicelsius
@@ -98,10 +187,20 @@ static u32 pid_controller(struct thermal_zone_device *tz,
{
s64 p, i, d, power_range;
s32 err, max_power_frac;
+ u32 sustainable_power;
struct power_allocator_params *params = tz->governor_data;
max_power_frac = int_to_frac(max_allocatable_power);
+ if (tz->tzp->sustainable_power) {
+ sustainable_power = tz->tzp->sustainable_power;
+ } else {
+ sustainable_power = estimate_sustainable_power(tz);
+ estimate_pid_constants(tz, sustainable_power,
+ params->trip_switch_on, control_temp,
+ true);
+ }
+
err = control_temp - current_temp;
err = int_to_frac(err);
@@ -139,7 +238,7 @@ static u32 pid_controller(struct thermal_zone_device *tz,
power_range = p + i + d;
/* feed-forward the known sustainable dissipatable power */
- power_range = tz->tzp->sustainable_power + frac_to_int(power_range);
+ power_range = sustainable_power + frac_to_int(power_range);
power_range = clamp(power_range, (s64)0, (s64)max_allocatable_power);
@@ -247,6 +346,11 @@ static int allocate_power(struct thermal_zone_device *tz,
}
}
+ if (!num_actors) {
+ ret = -ENODEV;
+ goto unlock;
+ }
+
/*
* We need to allocate five arrays of the same size:
* req_power, max_power, granted_power, extra_actor_power and
@@ -340,43 +444,66 @@ unlock:
return ret;
}
-static int get_governor_trips(struct thermal_zone_device *tz,
- struct power_allocator_params *params)
+/**
+ * get_governor_trips() - get the number of the two trip points that are key for this governor
+ * @tz: thermal zone to operate on
+ * @params: pointer to private data for this governor
+ *
+ * The power allocator governor works optimally with two trips points:
+ * a "switch on" trip point and a "maximum desired temperature". These
+ * are defined as the first and last passive trip points.
+ *
+ * If there is only one trip point, then that's considered to be the
+ * "maximum desired temperature" trip point and the governor is always
+ * on. If there are no passive or active trip points, then the
+ * governor won't do anything. In fact, its throttle function
+ * won't be called at all.
+ */
+static void get_governor_trips(struct thermal_zone_device *tz,
+ struct power_allocator_params *params)
{
- int i, ret, last_passive;
+ int i, last_active, last_passive;
bool found_first_passive;
found_first_passive = false;
- last_passive = -1;
- ret = -EINVAL;
+ last_active = INVALID_TRIP;
+ last_passive = INVALID_TRIP;
for (i = 0; i < tz->trips; i++) {
enum thermal_trip_type type;
+ int ret;
ret = tz->ops->get_trip_type(tz, i, &type);
- if (ret)
- return ret;
+ if (ret) {
+ dev_warn(&tz->device,
+ "Failed to get trip point %d type: %d\n", i,
+ ret);
+ continue;
+ }
- if (!found_first_passive) {
- if (type == THERMAL_TRIP_PASSIVE) {
+ if (type == THERMAL_TRIP_PASSIVE) {
+ if (!found_first_passive) {
params->trip_switch_on = i;
found_first_passive = true;
+ } else {
+ last_passive = i;
}
- } else if (type == THERMAL_TRIP_PASSIVE) {
- last_passive = i;
+ } else if (type == THERMAL_TRIP_ACTIVE) {
+ last_active = i;
} else {
break;
}
}
- if (last_passive != -1) {
+ if (last_passive != INVALID_TRIP) {
params->trip_max_desired_temperature = last_passive;
- ret = 0;
+ } else if (found_first_passive) {
+ params->trip_max_desired_temperature = params->trip_switch_on;
+ params->trip_switch_on = INVALID_TRIP;
} else {
- ret = -EINVAL;
+ params->trip_switch_on = INVALID_TRIP;
+ params->trip_max_desired_temperature = last_active;
}
-
- return ret;
}
static void reset_pid_controller(struct power_allocator_params *params)
@@ -405,60 +532,45 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
* power_allocator_bind() - bind the power_allocator governor to a thermal zone
* @tz: thermal zone to bind it to
*
- * Check that the thermal zone is valid for this governor, that is, it
- * has two thermal trips. If so, initialize the PID controller
- * parameters and bind it to the thermal zone.
+ * Initialize the PID controller parameters and bind it to the thermal
+ * zone.
*
- * Return: 0 on success, -EINVAL if the trips were invalid or -ENOMEM
- * if we ran out of memory.
+ * Return: 0 on success, or -ENOMEM if we ran out of memory.
*/
static int power_allocator_bind(struct thermal_zone_device *tz)
{
int ret;
struct power_allocator_params *params;
- int switch_on_temp, control_temp;
- u32 temperature_threshold;
-
- if (!tz->tzp || !tz->tzp->sustainable_power) {
- dev_err(&tz->device,
- "power_allocator: missing sustainable_power\n");
- return -EINVAL;
- }
+ int control_temp;
params = kzalloc(sizeof(*params), GFP_KERNEL);
if (!params)
return -ENOMEM;
- ret = get_governor_trips(tz, params);
- if (ret) {
- dev_err(&tz->device,
- "thermal zone %s has wrong trip setup for power allocator\n",
- tz->type);
- goto free;
- }
+ if (!tz->tzp) {
+ tz->tzp = kzalloc(sizeof(*tz->tzp), GFP_KERNEL);
+ if (!tz->tzp) {
+ ret = -ENOMEM;
+ goto free_params;
+ }
- ret = tz->ops->get_trip_temp(tz, params->trip_switch_on,
- &switch_on_temp);
- if (ret)
- goto free;
+ params->allocated_tzp = true;
+ }
- ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature,
- &control_temp);
- if (ret)
- goto free;
+ if (!tz->tzp->sustainable_power)
+ dev_warn(&tz->device, "power_allocator: sustainable_power will be estimated\n");
- temperature_threshold = control_temp - switch_on_temp;
+ get_governor_trips(tz, params);
- tz->tzp->k_po = tz->tzp->k_po ?:
- int_to_frac(tz->tzp->sustainable_power) / temperature_threshold;
- tz->tzp->k_pu = tz->tzp->k_pu ?:
- int_to_frac(2 * tz->tzp->sustainable_power) /
- temperature_threshold;
- tz->tzp->k_i = tz->tzp->k_i ?: int_to_frac(10) / 1000;
- /*
- * The default for k_d and integral_cutoff is 0, so we can
- * leave them as they are.
- */
+ if (tz->trips > 0) {
+ ret = tz->ops->get_trip_temp(tz,
+ params->trip_max_desired_temperature,
+ &control_temp);
+ if (!ret)
+ estimate_pid_constants(tz, tz->tzp->sustainable_power,
+ params->trip_switch_on,
+ control_temp, false);
+ }
reset_pid_controller(params);
@@ -466,14 +578,23 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
return 0;
-free:
+free_params:
kfree(params);
+
return ret;
}
static void power_allocator_unbind(struct thermal_zone_device *tz)
{
+ struct power_allocator_params *params = tz->governor_data;
+
dev_dbg(&tz->device, "Unbinding from thermal zone %d\n", tz->id);
+
+ if (params->allocated_tzp) {
+ kfree(tz->tzp);
+ tz->tzp = NULL;
+ }
+
kfree(tz->governor_data);
tz->governor_data = NULL;
}
@@ -499,13 +620,7 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
ret = tz->ops->get_trip_temp(tz, params->trip_switch_on,
&switch_on_temp);
- if (ret) {
- dev_warn(&tz->device,
- "Failed to get switch on temperature: %d\n", ret);
- return ret;
- }
-
- if (current_temp < switch_on_temp) {
+ if (!ret && (current_temp < switch_on_temp)) {
tz->passive = 0;
reset_pid_controller(params);
allow_maximum_power(tz);
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 5e5fc7015c7f..d9e525cc9c1c 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1013,6 +1013,34 @@ int power_actor_get_max_power(struct thermal_cooling_device *cdev,
}
/**
+ * power_actor_get_min_power() - get the mainimum power that a cdev can consume
+ * @cdev: pointer to &thermal_cooling_device
+ * @tz: a valid thermal zone device pointer
+ * @min_power: pointer in which to store the minimum power
+ *
+ * Calculate the minimum power consumption in milliwatts that the
+ * cooling device can currently consume and store it in @min_power.
+ *
+ * Return: 0 on success, -EINVAL if @cdev doesn't support the
+ * power_actor API or -E* on other error.
+ */
+int power_actor_get_min_power(struct thermal_cooling_device *cdev,
+ struct thermal_zone_device *tz, u32 *min_power)
+{
+ unsigned long max_state;
+ int ret;
+
+ if (!cdev_is_power_actor(cdev))
+ return -EINVAL;
+
+ ret = cdev->ops->get_max_state(cdev, &max_state);
+ if (ret)
+ return ret;
+
+ return cdev->ops->state2power(cdev, tz, max_state, min_power);
+}
+
+/**
* power_actor_set_power() - limit the maximum power that a cooling device can consume
* @cdev: pointer to &thermal_cooling_device
* @instance: thermal instance to update
diff --git a/drivers/thermal/ti-soc-thermal/Kconfig b/drivers/thermal/ti-soc-thermal/Kconfig
index bd4c7beba679..cb6686ff09ae 100644
--- a/drivers/thermal/ti-soc-thermal/Kconfig
+++ b/drivers/thermal/ti-soc-thermal/Kconfig
@@ -1,7 +1,5 @@
config TI_SOC_THERMAL
tristate "Texas Instruments SoCs temperature sensor driver"
- depends on THERMAL
- depends on ARCH_HAS_BANDGAP
help
If you say yes here you get support for the Texas Instruments
OMAP4460+ on die bandgap temperature sensor support. The register
@@ -24,7 +22,7 @@ config TI_THERMAL
config OMAP4_THERMAL
bool "Texas Instruments OMAP4 thermal support"
depends on TI_SOC_THERMAL
- depends on ARCH_OMAP4
+ depends on ARCH_OMAP4 || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
OMAP4 SoC family. The current chip supported are:
@@ -38,7 +36,7 @@ config OMAP4_THERMAL
config OMAP5_THERMAL
bool "Texas Instruments OMAP5 thermal support"
depends on TI_SOC_THERMAL
- depends on SOC_OMAP5
+ depends on SOC_OMAP5 || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
OMAP5 SoC family. The current chip supported are:
@@ -50,7 +48,7 @@ config OMAP5_THERMAL
config DRA752_THERMAL
bool "Texas Instruments DRA752 thermal support"
depends on TI_SOC_THERMAL
- depends on SOC_DRA7XX
+ depends on SOC_DRA7XX || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
DRA752 SoC family. The current chip supported are: