summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorSoeren Grunewald <soeren.grunewald@desy.de>2015-04-28 16:29:49 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-04-28 20:22:31 +0200
commit96a5d18bc1338786fecac73599f1681f59a59a8e (patch)
tree2de0fdf95d09910b777e7b233148226494a9e9df /drivers
parent31c6ba97d1671b0a853197fe54a05e0b07ce2631 (diff)
downloadlinux-96a5d18bc1338786fecac73599f1681f59a59a8e.tar.bz2
serial: 8250_pci: Add support for 16 port Exar boards
The Exar XR17V358 chip usually provides only 8 ports. But two chips can be combined to act as a single 16 port chip. Therefor one chip is configured as master the second as slave by connecting the mode pin to VCC (master) or GND (slave). Then the master chip is reporting a different device-id depending on whether a slave is detected or not. The UARTs 8-15 are addressed from 0x2000-0x3fff. So the offset of 0x400 from UART to UART can be used to address all 16 ports as before. See: https://www.exar.com/common/content/document.ashx?id=1587 page 11 Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/serial/8250/8250_pci.c25
1 files changed, 23 insertions, 2 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 08da4d3e2162..46bcebba54b2 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1998,6 +1998,8 @@ pci_wch_ch38x_setup(struct serial_private *priv,
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
+#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
+
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
@@ -2520,6 +2522,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_xr17v35x_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17V8358,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
/*
* Xircom cards
*/
@@ -2999,6 +3008,7 @@ enum pci_board_num_t {
pbn_exar_XR17V352,
pbn_exar_XR17V354,
pbn_exar_XR17V358,
+ pbn_exar_XR17V8358,
pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
pbn_ni8430_2,
@@ -3685,6 +3695,14 @@ static struct pciserial_board pci_boards[] = {
.reg_shift = 0,
.first_offset = 0,
},
+ [pbn_exar_XR17V8358] = {
+ .flags = FL_BASE0,
+ .num_ports = 16,
+ .base_baud = 7812500,
+ .uart_offset = 0x400,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
[pbn_exar_ibm_saturn] = {
.flags = FL_BASE0,
.num_ports = 1,
@@ -5080,7 +5098,7 @@ static struct pci_device_id serial_pci_tbl[] = {
0,
0, pbn_exar_XR17C158 },
/*
- * Exar Corp. XR17V35[248] Dual/Quad/Octal PCIe UARTs
+ * Exar Corp. XR17V[48]35[248] Dual/Quad/Octal/Hexa PCIe UARTs
*/
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V352,
PCI_ANY_ID, PCI_ANY_ID,
@@ -5094,7 +5112,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V358 },
-
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V8358 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/