summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorMarco Felsch <m.felsch@pengutronix.de>2019-07-30 15:44:07 +0200
committerMiquel Raynal <miquel.raynal@bootlin.com>2019-08-03 02:00:01 +0200
commit8493b2a06fc5b77ef5c579dc32b12761f7b7a84c (patch)
tree81c8bca70f29f328f9d7721d6c982e99110bbd25 /drivers
parent5f9e832c137075045d15cd6899ab0505cfb2ca4b (diff)
downloadlinux-8493b2a06fc5b77ef5c579dc32b12761f7b7a84c.tar.bz2
mtd: rawnand: micron: handle on-die "ECC-off" devices correctly
Some devices are not supposed to support on-die ECC but experience shows that internal ECC machinery can actually be enabled through the "SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter Tables" returns that it is not. Currently, the driver checks the "READ ID Parameter" field directly after having enabled the feature. If the check fails it returns immediately but leaves the ECC on. When using buggy chips like MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will go through the on-die ECC, confusing the host controller which is supposed to be the one handling correction. To address this in a common way we need to turn off the on-die ECC directly after reading the "READ ID Parameter" and before checking the "ECC status". Cc: stable@vger.kernel.org Fixes: dbc44edbf833 ("mtd: rawnand: micron: Fix on-die ECC detection logic") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/nand/raw/nand_micron.c14
1 files changed, 11 insertions, 3 deletions
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 1622d3145587..8ca9fad6e6ad 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -390,6 +390,14 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
(chip->id.data[4] & MICRON_ID_INTERNAL_ECC_MASK) != 0x2)
return MICRON_ON_DIE_UNSUPPORTED;
+ /*
+ * It seems that there are devices which do not support ECC officially.
+ * At least the MT29F2G08ABAGA / MT29F2G08ABBGA devices supports
+ * enabling the ECC feature but don't reflect that to the READ_ID table.
+ * So we have to guarantee that we disable the ECC feature directly
+ * after we did the READ_ID table command. Later we can evaluate the
+ * ECC_ENABLE support.
+ */
ret = micron_nand_on_die_ecc_setup(chip, true);
if (ret)
return MICRON_ON_DIE_UNSUPPORTED;
@@ -398,13 +406,13 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
if (ret)
return MICRON_ON_DIE_UNSUPPORTED;
- if (!(id[4] & MICRON_ID_ECC_ENABLED))
- return MICRON_ON_DIE_UNSUPPORTED;
-
ret = micron_nand_on_die_ecc_setup(chip, false);
if (ret)
return MICRON_ON_DIE_UNSUPPORTED;
+ if (!(id[4] & MICRON_ID_ECC_ENABLED))
+ return MICRON_ON_DIE_UNSUPPORTED;
+
ret = nand_readid_op(chip, 0, id, sizeof(id));
if (ret)
return MICRON_ON_DIE_UNSUPPORTED;