summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2019-09-03 21:57:04 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2019-09-03 21:57:04 +0200
commit526af040548791c4693e985afff876d9e6704b20 (patch)
tree2dba8a144c89edf2cc4e85d5805f526b98451a60 /drivers
parent18ec9392929fd87df0aaa12ddb954483114a1073 (diff)
parente58915179f3f4a839ea3b9aeae1c1e13e98e33b1 (diff)
downloadlinux-526af040548791c4693e985afff876d9e6704b20.tar.bz2
Merge tag 'fpga-cvp-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes: FPGA Manager changes for 5.4-rc1 Here is the second set of changes for the 5.4 merge window. This patchset adds support for the v2 revision of Intel (Altera)'s CVP parts including the Stratix 10. All of this patches have been reviewed and been in the last few linux-next releases without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-cvp-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: altera-cvp: Add Stratix10 (V2) Support fpga: altera-cvp: Preparation for V2 parts. fpga: altera-cvp: Discover Vendor Specific offset
Diffstat (limited to 'drivers')
-rw-r--r--drivers/fpga/Kconfig6
-rw-r--r--drivers/fpga/altera-cvp.c339
2 files changed, 271 insertions, 74 deletions
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index cdd4f73b4869..73c779e920ed 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -46,11 +46,11 @@ config FPGA_MGR_ALTERA_PS_SPI
using the passive serial interface over SPI.
config FPGA_MGR_ALTERA_CVP
- tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager"
+ tristate "Altera CvP FPGA Manager"
depends on PCI
help
- FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V
- and Arria 10 Altera FPGAs using the CvP interface over PCIe.
+ FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V,
+ Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe.
config FPGA_MGR_ZYNQ_FPGA
tristate "Xilinx Zynq FPGA"
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 53b963071c7b..4e0edb60bfba 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -22,10 +22,10 @@
#define TIMEOUT_US 2000 /* CVP STATUS timeout for USERMODE polling */
/* Vendor Specific Extended Capability Registers */
-#define VSE_PCIE_EXT_CAP_ID 0x200
+#define VSE_PCIE_EXT_CAP_ID 0x0
#define VSE_PCIE_EXT_CAP_ID_VAL 0x000b /* 16bit */
-#define VSE_CVP_STATUS 0x21c /* 32bit */
+#define VSE_CVP_STATUS 0x1c /* 32bit */
#define VSE_CVP_STATUS_CFG_RDY BIT(18) /* CVP_CONFIG_READY */
#define VSE_CVP_STATUS_CFG_ERR BIT(19) /* CVP_CONFIG_ERROR */
#define VSE_CVP_STATUS_CVP_EN BIT(20) /* ctrl block is enabling CVP */
@@ -33,26 +33,44 @@
#define VSE_CVP_STATUS_CFG_DONE BIT(23) /* CVP_CONFIG_DONE */
#define VSE_CVP_STATUS_PLD_CLK_IN_USE BIT(24) /* PLD_CLK_IN_USE */
-#define VSE_CVP_MODE_CTRL 0x220 /* 32bit */
+#define VSE_CVP_MODE_CTRL 0x20 /* 32bit */
#define VSE_CVP_MODE_CTRL_CVP_MODE BIT(0) /* CVP (1) or normal mode (0) */
#define VSE_CVP_MODE_CTRL_HIP_CLK_SEL BIT(1) /* PMA (1) or fabric clock (0) */
#define VSE_CVP_MODE_CTRL_NUMCLKS_OFF 8 /* NUMCLKS bits offset */
#define VSE_CVP_MODE_CTRL_NUMCLKS_MASK GENMASK(15, 8)
-#define VSE_CVP_DATA 0x228 /* 32bit */
-#define VSE_CVP_PROG_CTRL 0x22c /* 32bit */
+#define VSE_CVP_DATA 0x28 /* 32bit */
+#define VSE_CVP_PROG_CTRL 0x2c /* 32bit */
#define VSE_CVP_PROG_CTRL_CONFIG BIT(0)
#define VSE_CVP_PROG_CTRL_START_XFER BIT(1)
+#define VSE_CVP_PROG_CTRL_MASK GENMASK(1, 0)
-#define VSE_UNCOR_ERR_STATUS 0x234 /* 32bit */
+#define VSE_UNCOR_ERR_STATUS 0x34 /* 32bit */
#define VSE_UNCOR_ERR_CVP_CFG_ERR BIT(5) /* CVP_CONFIG_ERROR_LATCHED */
+#define V1_VSEC_OFFSET 0x200 /* Vendor Specific Offset V1 */
+/* V2 Defines */
+#define VSE_CVP_TX_CREDITS 0x49 /* 8bit */
+
+#define V2_CREDIT_TIMEOUT_US 20000
+#define V2_CHECK_CREDIT_US 10
+#define V2_POLL_TIMEOUT_US 1000000
+#define V2_USER_TIMEOUT_US 500000
+
+#define V1_POLL_TIMEOUT_US 10
+
#define DRV_NAME "altera-cvp"
#define ALTERA_CVP_MGR_NAME "Altera CvP FPGA Manager"
+/* Write block sizes */
+#define ALTERA_CVP_V1_SIZE 4
+#define ALTERA_CVP_V2_SIZE 4096
+
/* Optional CvP config error status check for debugging */
static bool altera_cvp_chkcfg;
+struct cvp_priv;
+
struct altera_cvp_conf {
struct fpga_manager *mgr;
struct pci_dev *pci_dev;
@@ -61,14 +79,47 @@ struct altera_cvp_conf {
u32 data);
char mgr_name[64];
u8 numclks;
+ u32 sent_packets;
+ u32 vsec_offset;
+ const struct cvp_priv *priv;
+};
+
+struct cvp_priv {
+ void (*switch_clk)(struct altera_cvp_conf *conf);
+ int (*clear_state)(struct altera_cvp_conf *conf);
+ int (*wait_credit)(struct fpga_manager *mgr, u32 blocks);
+ size_t block_size;
+ int poll_time_us;
+ int user_time_us;
};
+static int altera_read_config_byte(struct altera_cvp_conf *conf,
+ int where, u8 *val)
+{
+ return pci_read_config_byte(conf->pci_dev, conf->vsec_offset + where,
+ val);
+}
+
+static int altera_read_config_dword(struct altera_cvp_conf *conf,
+ int where, u32 *val)
+{
+ return pci_read_config_dword(conf->pci_dev, conf->vsec_offset + where,
+ val);
+}
+
+static int altera_write_config_dword(struct altera_cvp_conf *conf,
+ int where, u32 val)
+{
+ return pci_write_config_dword(conf->pci_dev, conf->vsec_offset + where,
+ val);
+}
+
static enum fpga_mgr_states altera_cvp_state(struct fpga_manager *mgr)
{
struct altera_cvp_conf *conf = mgr->priv;
u32 status;
- pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &status);
+ altera_read_config_dword(conf, VSE_CVP_STATUS, &status);
if (status & VSE_CVP_STATUS_CFG_DONE)
return FPGA_MGR_STATE_OPERATING;
@@ -86,7 +137,8 @@ static void altera_cvp_write_data_iomem(struct altera_cvp_conf *conf, u32 val)
static void altera_cvp_write_data_config(struct altera_cvp_conf *conf, u32 val)
{
- pci_write_config_dword(conf->pci_dev, VSE_CVP_DATA, val);
+ pci_write_config_dword(conf->pci_dev, conf->vsec_offset + VSE_CVP_DATA,
+ val);
}
/* switches between CvP clock and internal clock */
@@ -96,10 +148,10 @@ static void altera_cvp_dummy_write(struct altera_cvp_conf *conf)
u32 val;
/* set 1 CVP clock cycle for every CVP Data Register Write */
- pci_read_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
val |= 1 << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
- pci_write_config_dword(conf->pci_dev, VSE_CVP_MODE_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
for (i = 0; i < CVP_DUMMY_WR; i++)
conf->write_data(conf, 0); /* dummy data, could be any value */
@@ -116,7 +168,7 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
retries++;
do {
- pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
+ altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
if ((val & status_mask) == status_val)
return 0;
@@ -127,32 +179,136 @@ static int altera_cvp_wait_status(struct altera_cvp_conf *conf, u32 status_mask,
return -ETIMEDOUT;
}
+static int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
+{
+ struct altera_cvp_conf *conf = mgr->priv;
+ u32 val;
+ int ret;
+
+ /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
+ ret = altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
+ if (ret || (val & VSE_CVP_STATUS_CFG_ERR)) {
+ dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
+ bytes);
+ return -EPROTO;
+ }
+ return 0;
+}
+
+/*
+ * CvP Version2 Functions
+ * Recent Intel FPGAs use a credit mechanism to throttle incoming
+ * bitstreams and a different method of clearing the state.
+ */
+
+static int altera_cvp_v2_clear_state(struct altera_cvp_conf *conf)
+{
+ u32 val;
+ int ret;
+
+ /* Clear the START_XFER and CVP_CONFIG bits */
+ ret = altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error reading CVP Program Control Register\n");
+ return ret;
+ }
+
+ val &= ~VSE_CVP_PROG_CTRL_MASK;
+ ret = altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error writing CVP Program Control Register\n");
+ return ret;
+ }
+
+ return altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
+ conf->priv->poll_time_us);
+}
+
+static int altera_cvp_v2_wait_for_credit(struct fpga_manager *mgr,
+ u32 blocks)
+{
+ u32 timeout = V2_CREDIT_TIMEOUT_US / V2_CHECK_CREDIT_US;
+ struct altera_cvp_conf *conf = mgr->priv;
+ int ret;
+ u8 val;
+
+ do {
+ ret = altera_read_config_byte(conf, VSE_CVP_TX_CREDITS, &val);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "Error reading CVP Credit Register\n");
+ return ret;
+ }
+
+ /* Return if there is space in FIFO */
+ if (val - (u8)conf->sent_packets)
+ return 0;
+
+ ret = altera_cvp_chk_error(mgr, blocks * ALTERA_CVP_V2_SIZE);
+ if (ret) {
+ dev_err(&conf->pci_dev->dev,
+ "CE Bit error credit reg[0x%x]:sent[0x%x]\n",
+ val, conf->sent_packets);
+ return -EAGAIN;
+ }
+
+ /* Limit the check credit byte traffic */
+ usleep_range(V2_CHECK_CREDIT_US, V2_CHECK_CREDIT_US + 1);
+ } while (timeout--);
+
+ dev_err(&conf->pci_dev->dev, "Timeout waiting for credit\n");
+ return -ETIMEDOUT;
+}
+
+static int altera_cvp_send_block(struct altera_cvp_conf *conf,
+ const u32 *data, size_t len)
+{
+ u32 mask, words = len / sizeof(u32);
+ int i, remainder;
+
+ for (i = 0; i < words; i++)
+ conf->write_data(conf, *data++);
+
+ /* write up to 3 trailing bytes, if any */
+ remainder = len % sizeof(u32);
+ if (remainder) {
+ mask = BIT(remainder * 8) - 1;
+ if (mask)
+ conf->write_data(conf, *data & mask);
+ }
+
+ return 0;
+}
+
static int altera_cvp_teardown(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
struct altera_cvp_conf *conf = mgr->priv;
- struct pci_dev *pdev = conf->pci_dev;
int ret;
u32 val;
/* STEP 12 - reset START_XFER bit */
- pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
val &= ~VSE_CVP_PROG_CTRL_START_XFER;
- pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
/* STEP 13 - reset CVP_CONFIG bit */
val &= ~VSE_CVP_PROG_CTRL_CONFIG;
- pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
/*
* STEP 14
* - set CVP_NUMCLKS to 1 and then issue CVP_DUMMY_WR dummy
* writes to the HIP
*/
- altera_cvp_dummy_write(conf); /* from CVP clock to internal clock */
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
/* STEP 15 - poll CVP_CONFIG_READY bit for 0 with 10us timeout */
- ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0, 10);
+ ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY, 0,
+ conf->priv->poll_time_us);
if (ret)
dev_err(&mgr->dev, "CFG_RDY == 0 timeout\n");
@@ -164,7 +320,6 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
const char *buf, size_t count)
{
struct altera_cvp_conf *conf = mgr->priv;
- struct pci_dev *pdev = conf->pci_dev;
u32 iflags, val;
int ret;
@@ -184,7 +339,7 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
conf->numclks = 1; /* for uncompressed and unencrypted images */
/* STEP 1 - read CVP status and check CVP_EN flag */
- pci_read_config_dword(pdev, VSE_CVP_STATUS, &val);
+ altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
if (!(val & VSE_CVP_STATUS_CVP_EN)) {
dev_err(&mgr->dev, "CVP mode off: 0x%04x\n", val);
return -ENODEV;
@@ -202,30 +357,42 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
* - set HIP_CLK_SEL and CVP_MODE (must be set in the order mentioned)
*/
/* switch from fabric to PMA clock */
- pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
val |= VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
- pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
/* set CVP mode */
- pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
val |= VSE_CVP_MODE_CTRL_CVP_MODE;
- pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
/*
* STEP 3
* - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
*/
- altera_cvp_dummy_write(conf);
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
+
+ if (conf->priv->clear_state) {
+ ret = conf->priv->clear_state(conf);
+ if (ret) {
+ dev_err(&mgr->dev, "Problem clearing out state\n");
+ return ret;
+ }
+ }
+
+ conf->sent_packets = 0;
/* STEP 4 - set CVP_CONFIG bit */
- pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
/* request control block to begin transfer using CVP */
val |= VSE_CVP_PROG_CTRL_CONFIG;
- pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
- /* STEP 5 - poll CVP_CONFIG READY for 1 with 10us timeout */
+ /* STEP 5 - poll CVP_CONFIG READY for 1 with timeout */
ret = altera_cvp_wait_status(conf, VSE_CVP_STATUS_CFG_RDY,
- VSE_CVP_STATUS_CFG_RDY, 10);
+ VSE_CVP_STATUS_CFG_RDY,
+ conf->priv->poll_time_us);
if (ret) {
dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
return ret;
@@ -235,33 +402,28 @@ static int altera_cvp_write_init(struct fpga_manager *mgr,
* STEP 6
* - set CVP_NUMCLKS to 1 and issue CVP_DUMMY_WR dummy writes to the HIP
*/
- altera_cvp_dummy_write(conf);
+ if (conf->priv->switch_clk)
+ conf->priv->switch_clk(conf);
+
+ if (altera_cvp_chkcfg) {
+ ret = altera_cvp_chk_error(mgr, 0);
+ if (ret) {
+ dev_warn(&mgr->dev, "CFG_RDY == 1 timeout\n");
+ return ret;
+ }
+ }
/* STEP 7 - set START_XFER */
- pci_read_config_dword(pdev, VSE_CVP_PROG_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_PROG_CTRL, &val);
val |= VSE_CVP_PROG_CTRL_START_XFER;
- pci_write_config_dword(pdev, VSE_CVP_PROG_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_PROG_CTRL, val);
/* STEP 8 - start transfer (set CVP_NUMCLKS for bitstream) */
- pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
- val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
- val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
- pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
-
- return 0;
-}
-
-static inline int altera_cvp_chk_error(struct fpga_manager *mgr, size_t bytes)
-{
- struct altera_cvp_conf *conf = mgr->priv;
- u32 val;
-
- /* STEP 10 (optional) - check CVP_CONFIG_ERROR flag */
- pci_read_config_dword(conf->pci_dev, VSE_CVP_STATUS, &val);
- if (val & VSE_CVP_STATUS_CFG_ERR) {
- dev_err(&mgr->dev, "CVP_CONFIG_ERROR after %zu bytes!\n",
- bytes);
- return -EPROTO;
+ if (conf->priv->switch_clk) {
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
+ val &= ~VSE_CVP_MODE_CTRL_NUMCLKS_MASK;
+ val |= conf->numclks << VSE_CVP_MODE_CTRL_NUMCLKS_OFF;
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
}
return 0;
}
@@ -270,20 +432,32 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
size_t count)
{
struct altera_cvp_conf *conf = mgr->priv;
+ size_t done, remaining, len;
const u32 *data;
- size_t done, remaining;
int status = 0;
- u32 mask;
/* STEP 9 - write 32-bit data from RBF file to CVP data register */
data = (u32 *)buf;
remaining = count;
done = 0;
- while (remaining >= 4) {
- conf->write_data(conf, *data++);
- done += 4;
- remaining -= 4;
+ while (remaining) {
+ /* Use credit throttling if available */
+ if (conf->priv->wait_credit) {
+ status = conf->priv->wait_credit(mgr, done);
+ if (status) {
+ dev_err(&conf->pci_dev->dev,
+ "Wait Credit ERR: 0x%x\n", status);
+ return status;
+ }
+ }
+
+ len = min(conf->priv->block_size, remaining);
+ altera_cvp_send_block(conf, data, len);
+ data += len / sizeof(u32);
+ done += len;
+ remaining -= len;
+ conf->sent_packets++;
/*
* STEP 10 (optional) and STEP 11
@@ -301,11 +475,6 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
}
}
- /* write up to 3 trailing bytes, if any */
- mask = BIT(remaining * 8) - 1;
- if (mask)
- conf->write_data(conf, *data & mask);
-
if (altera_cvp_chkcfg)
status = altera_cvp_chk_error(mgr, count);
@@ -316,31 +485,30 @@ static int altera_cvp_write_complete(struct fpga_manager *mgr,
struct fpga_image_info *info)
{
struct altera_cvp_conf *conf = mgr->priv;
- struct pci_dev *pdev = conf->pci_dev;
+ u32 mask, val;
int ret;
- u32 mask;
- u32 val;
ret = altera_cvp_teardown(mgr, info);
if (ret)
return ret;
/* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */
- pci_read_config_dword(pdev, VSE_UNCOR_ERR_STATUS, &val);
+ altera_read_config_dword(conf, VSE_UNCOR_ERR_STATUS, &val);
if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) {
dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
return -EPROTO;
}
/* STEP 17 - reset CVP_MODE and HIP_CLK_SEL bit */
- pci_read_config_dword(pdev, VSE_CVP_MODE_CTRL, &val);
+ altera_read_config_dword(conf, VSE_CVP_MODE_CTRL, &val);
val &= ~VSE_CVP_MODE_CTRL_HIP_CLK_SEL;
val &= ~VSE_CVP_MODE_CTRL_CVP_MODE;
- pci_write_config_dword(pdev, VSE_CVP_MODE_CTRL, val);
+ altera_write_config_dword(conf, VSE_CVP_MODE_CTRL, val);
/* STEP 18 - poll PLD_CLK_IN_USE and USER_MODE bits */
mask = VSE_CVP_STATUS_PLD_CLK_IN_USE | VSE_CVP_STATUS_USERMODE;
- ret = altera_cvp_wait_status(conf, mask, mask, TIMEOUT_US);
+ ret = altera_cvp_wait_status(conf, mask, mask,
+ conf->priv->user_time_us);
if (ret)
dev_err(&mgr->dev, "PLD_CLK_IN_USE|USERMODE timeout\n");
@@ -354,6 +522,21 @@ static const struct fpga_manager_ops altera_cvp_ops = {
.write_complete = altera_cvp_write_complete,
};
+static const struct cvp_priv cvp_priv_v1 = {
+ .switch_clk = altera_cvp_dummy_write,
+ .block_size = ALTERA_CVP_V1_SIZE,
+ .poll_time_us = V1_POLL_TIMEOUT_US,
+ .user_time_us = TIMEOUT_US,
+};
+
+static const struct cvp_priv cvp_priv_v2 = {
+ .clear_state = altera_cvp_v2_clear_state,
+ .wait_credit = altera_cvp_v2_wait_for_credit,
+ .block_size = ALTERA_CVP_V2_SIZE,
+ .poll_time_us = V2_POLL_TIMEOUT_US,
+ .user_time_us = V2_USER_TIMEOUT_US,
+};
+
static ssize_t chkcfg_show(struct device_driver *dev, char *buf)
{
return snprintf(buf, 3, "%d\n", altera_cvp_chkcfg);
@@ -395,22 +578,29 @@ static int altera_cvp_probe(struct pci_dev *pdev,
{
struct altera_cvp_conf *conf;
struct fpga_manager *mgr;
+ int ret, offset;
u16 cmd, val;
u32 regval;
- int ret;
+
+ /* Discover the Vendor Specific Offset for this device */
+ offset = pci_find_next_ext_capability(pdev, 0, PCI_EXT_CAP_ID_VNDR);
+ if (!offset) {
+ dev_err(&pdev->dev, "No Vendor Specific Offset.\n");
+ return -ENODEV;
+ }
/*
* First check if this is the expected FPGA device. PCI config
* space access works without enabling the PCI device, memory
* space access is enabled further down.
*/
- pci_read_config_word(pdev, VSE_PCIE_EXT_CAP_ID, &val);
+ pci_read_config_word(pdev, offset + VSE_PCIE_EXT_CAP_ID, &val);
if (val != VSE_PCIE_EXT_CAP_ID_VAL) {
dev_err(&pdev->dev, "Wrong EXT_CAP_ID value 0x%x\n", val);
return -ENODEV;
}
- pci_read_config_dword(pdev, VSE_CVP_STATUS, &regval);
+ pci_read_config_dword(pdev, offset + VSE_CVP_STATUS, &regval);
if (!(regval & VSE_CVP_STATUS_CVP_EN)) {
dev_err(&pdev->dev,
"CVP is disabled for this device: CVP_STATUS Reg 0x%x\n",
@@ -422,6 +612,8 @@ static int altera_cvp_probe(struct pci_dev *pdev,
if (!conf)
return -ENOMEM;
+ conf->vsec_offset = offset;
+
/*
* Enable memory BAR access. We cannot use pci_enable_device() here
* because it will make the driver unusable with FPGA devices that
@@ -446,6 +638,11 @@ static int altera_cvp_probe(struct pci_dev *pdev,
conf->pci_dev = pdev;
conf->write_data = altera_cvp_write_data_iomem;
+ if (conf->vsec_offset == V1_VSEC_OFFSET)
+ conf->priv = &cvp_priv_v1;
+ else
+ conf->priv = &cvp_priv_v2;
+
conf->map = pci_iomap(pdev, CVP_BAR, 0);
if (!conf->map) {
dev_warn(&pdev->dev, "Mapping CVP BAR failed\n");