diff options
author | Lee Jones <lee.jones@linaro.org> | 2020-07-17 17:55:32 +0100 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2020-07-20 09:03:30 +0100 |
commit | ecf8d08fa26cf86cf84924c30592eb31451083fc (patch) | |
tree | f5ac3af1bbdd6cdea75d035e39b2e86bf46e0247 /drivers | |
parent | 315482a52208da03cee1e7767bbc830faa77e8d3 (diff) | |
download | linux-ecf8d08fa26cf86cf84924c30592eb31451083fc.tar.bz2 |
iio: imu: inv_mpu6050: inv_mpu_core: Demote obvious misuse of kerneldoc to standard comment blocks
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:444: warning: Function parameter or member 'st' not described in 'inv_mpu6050_set_lpf_regs'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:444: warning: Function parameter or member 'val' not described in 'inv_mpu6050_set_lpf_regs'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:480: warning: Function parameter or member 'indio_dev' not described in 'inv_mpu6050_init_config'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:862: warning: Function parameter or member 'st' not described in 'inv_mpu6050_set_lpf'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:862: warning: Function parameter or member 'rate' not described in 'inv_mpu6050_set_lpf'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'dev' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'attr' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'buf' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:893: warning: Function parameter or member 'count' not described in 'inv_mpu6050_fifo_rate_store'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'dev' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'attr' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:954: warning: Function parameter or member 'buf' not described in 'inv_fifo_rate_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'dev' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'attr' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:975: warning: Function parameter or member 'buf' not described in 'inv_attr_show'
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c:1282: warning: Function parameter or member 'st' not described in 'inv_check_and_setup_chip'
Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 153f855db8d6..3fee3947f772 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -433,7 +433,7 @@ static int inv_mpu6050_set_gyro_fsr(struct inv_mpu6050_state *st, return regmap_write(st->map, st->reg->gyro_config, data); } -/** +/* * inv_mpu6050_set_lpf_regs() - set low pass filter registers, chip dependent * * MPU60xx/MPU9150 use only 1 register for accelerometer + gyroscope @@ -467,7 +467,7 @@ static int inv_mpu6050_set_lpf_regs(struct inv_mpu6050_state *st, return regmap_write(st->map, st->reg->accel_lpf, val); } -/** +/* * inv_mpu6050_init_config() - Initialize hardware, disable FIFO. * * Initial configuration: @@ -847,7 +847,7 @@ error_write_raw_unlock: return result; } -/** +/* * inv_mpu6050_set_lpf() - set low pass filer based on fifo rate. * * Based on the Nyquist principle, the bandwidth of the low @@ -884,7 +884,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) return 0; } -/** +/* * inv_mpu6050_fifo_rate_store() - Set fifo rate. */ static ssize_t @@ -945,7 +945,7 @@ fifo_rate_fail_unlock: return count; } -/** +/* * inv_fifo_rate_show() - Get the current sampling rate. */ static ssize_t @@ -962,7 +962,7 @@ inv_fifo_rate_show(struct device *dev, struct device_attribute *attr, return scnprintf(buf, PAGE_SIZE, "%u\n", fifo_rate); } -/** +/* * inv_attr_show() - calling this function will show current * parameters. * @@ -1275,7 +1275,7 @@ static const struct iio_info mpu_info = { .debugfs_reg_access = &inv_mpu6050_reg_access, }; -/** +/* * inv_check_and_setup_chip() - check and setup chip. */ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) |