rtc-cmos: move wake setup from ACPI glue into RTC driver

Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver
in drivers/rtc/rtc-cmos.c.

This removes the ordering constraint between the module_init(acpi_rtc_init)
and the cmos_do_probe() code that depends on it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2 files changed, 89 insertions, 112 deletions

diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 3c578ef78c48..24649ada08df 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -260,115 +260,3 @@ static int __init init_acpi_device_notify(void)
 }
 
 arch_initcall(init_acpi_device_notify);
-
-
-#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
-
-#ifdef CONFIG_PM
-static u32 rtc_handler(void *context)
-{
-	acpi_clear_event(ACPI_EVENT_RTC);
-	acpi_disable_event(ACPI_EVENT_RTC, 0);
-	return ACPI_INTERRUPT_HANDLED;
-}
-
-static inline void rtc_wake_setup(void)
-{
-	acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
-	/*
-	 * After the RTC handler is installed, the Fixed_RTC event should
-	 * be disabled. Only when the RTC alarm is set will it be enabled.
-	 */
-	acpi_clear_event(ACPI_EVENT_RTC);
-	acpi_disable_event(ACPI_EVENT_RTC, 0);
-}
-
-static void rtc_wake_on(struct device *dev)
-{
-	acpi_clear_event(ACPI_EVENT_RTC);
-	acpi_enable_event(ACPI_EVENT_RTC, 0);
-}
-
-static void rtc_wake_off(struct device *dev)
-{
-	acpi_disable_event(ACPI_EVENT_RTC, 0);
-}
-#else
-#define rtc_wake_setup()	do{}while(0)
-#define rtc_wake_on		NULL
-#define rtc_wake_off		NULL
-#endif
-
-/* Every ACPI platform has a mc146818 compatible "cmos rtc".  Here we find
- * its device node and pass extra config data.  This helps its driver use
- * capabilities that the now-obsolete mc146818 didn't have, and informs it
- * that this board's RTC is wakeup-capable (per ACPI spec).
- */
-#include <linux/mc146818rtc.h>
-
-static struct cmos_rtc_board_info rtc_info;
-
-
-/* PNP devices are registered in a subsys_initcall();
- * ACPI specifies the PNP IDs to use.
- */
-#include <linux/pnp.h>
-
-static int __init pnp_match(struct device *dev, void *data)
-{
-	static const char *ids[] = { "PNP0b00", "PNP0b01", "PNP0b02", };
-	struct pnp_dev *pnp = to_pnp_dev(dev);
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(ids); i++) {
-		if (compare_pnp_id(pnp->id, ids[i]) != 0)
-			return 1;
-	}
-	return 0;
-}
-
-static struct device *__init get_rtc_dev(void)
-{
-	return bus_find_device(&pnp_bus_type, NULL, NULL, pnp_match);
-}
-
-static int __init acpi_rtc_init(void)
-{
-	struct device *dev = get_rtc_dev();
-
-	if (acpi_disabled)
-		return 0;
-
-	if (dev) {
-		rtc_wake_setup();
-		rtc_info.wake_on = rtc_wake_on;
-		rtc_info.wake_off = rtc_wake_off;
-
-		/* workaround bug in some ACPI tables */
-		if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
-			DBG("bogus FADT month_alarm\n");
-			acpi_gbl_FADT.month_alarm = 0;
-		}
-
-		rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
-		rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
-		rtc_info.rtc_century = acpi_gbl_FADT.century;
-
-		/* NOTE:  S4_RTC_WAKE is NOT currently useful to Linux */
-		if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
-			printk(PREFIX "RTC can wake from S4\n");
-
-
-		dev->platform_data = &rtc_info;
-
-		/* RTC always wakes from S1/S2/S3, and often S4/STD */
-		device_init_wakeup(dev, 1);
-
-		put_device(dev);
-	} else
-		DBG("RTC unavailable?\n");
-	return 0;
-}
-module_init(acpi_rtc_init);
-
-#endif
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index b23af0c2a869..6778f82bad24 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -913,6 +913,92 @@ static inline int cmos_poweroff(struct device *dev)
  * predate even PNPBIOS should set up platform_bus devices.
  */
 
+#ifdef	CONFIG_ACPI
+
+#include <linux/acpi.h>
+
+#ifdef	CONFIG_PM
+static u32 rtc_handler(void *context)
+{
+	acpi_clear_event(ACPI_EVENT_RTC);
+	acpi_disable_event(ACPI_EVENT_RTC, 0);
+	return ACPI_INTERRUPT_HANDLED;
+}
+
+static inline void rtc_wake_setup(void)
+{
+	acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
+	/*
+	 * After the RTC handler is installed, the Fixed_RTC event should
+	 * be disabled. Only when the RTC alarm is set will it be enabled.
+	 */
+	acpi_clear_event(ACPI_EVENT_RTC);
+	acpi_disable_event(ACPI_EVENT_RTC, 0);
+}
+
+static void rtc_wake_on(struct device *dev)
+{
+	acpi_clear_event(ACPI_EVENT_RTC);
+	acpi_enable_event(ACPI_EVENT_RTC, 0);
+}
+
+static void rtc_wake_off(struct device *dev)
+{
+	acpi_disable_event(ACPI_EVENT_RTC, 0);
+}
+#else
+#define rtc_wake_setup()	do{}while(0)
+#define rtc_wake_on		NULL
+#define rtc_wake_off		NULL
+#endif
+
+/* Every ACPI platform has a mc146818 compatible "cmos rtc".  Here we find
+ * its device node and pass extra config data.  This helps its driver use
+ * capabilities that the now-obsolete mc146818 didn't have, and informs it
+ * that this board's RTC is wakeup-capable (per ACPI spec).
+ */
+static struct cmos_rtc_board_info acpi_rtc_info;
+
+static void __devinit
+cmos_wake_setup(struct device *dev)
+{
+	if (acpi_disabled)
+		return;
+
+	rtc_wake_setup();
+	acpi_rtc_info.wake_on = rtc_wake_on;
+	acpi_rtc_info.wake_off = rtc_wake_off;
+
+	/* workaround bug in some ACPI tables */
+	if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) {
+		dev_dbg(dev, "bogus FADT month_alarm (%d)\n",
+			acpi_gbl_FADT.month_alarm);
+		acpi_gbl_FADT.month_alarm = 0;
+	}
+
+	acpi_rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
+	acpi_rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
+	acpi_rtc_info.rtc_century = acpi_gbl_FADT.century;
+
+	/* NOTE:  S4_RTC_WAKE is NOT currently useful to Linux */
+	if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE)
+		dev_info(dev, "RTC can wake from S4\n");
+
+	dev->platform_data = &acpi_rtc_info;
+
+	/* RTC always wakes from S1/S2/S3, and often S4/STD */
+	device_init_wakeup(dev, 1);
+}
+
+#else
+
+static void __devinit
+cmos_wake_setup(struct device *dev)
+{
+}
+
+#endif
+
 #ifdef	CONFIG_PNP
 
 #include <linux/pnp.h>
@@ -920,6 +1006,8 @@ static inline int cmos_poweroff(struct device *dev)
 static int __devinit
 cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 {
+	cmos_wake_setup(&pnp->dev);
+
 	if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
 		/* Some machines contain a PNP entry for the RTC, but
 		 * don't define the IRQ. It should always be safe to
@@ -997,6 +1085,7 @@ static struct pnp_driver cmos_pnp_driver = {
 
 static int __init cmos_platform_probe(struct platform_device *pdev)
 {
+	cmos_wake_setup(&pdev->dev);
 	return cmos_do_probe(&pdev->dev,
 			platform_get_resource(pdev, IORESOURCE_IO, 0),
 			platform_get_irq(pdev, 0));