diff options
author | Marcin Rokicki <marcin.rokicki@tieto.com> | 2017-02-20 14:39:57 +0100 |
---|---|---|
committer | Kalle Valo <kvalo@qca.qualcomm.com> | 2017-04-05 10:41:03 +0300 |
commit | d6dfe25c8bb200027dfc5c793cbec81c9af6dd2e (patch) | |
tree | 0864532a34b8e82f0613d14c8d59532314aa8814 /drivers | |
parent | e871fb6396f7251ae4a90c20be38015c8b20e502 (diff) | |
download | linux-d6dfe25c8bb200027dfc5c793cbec81c9af6dd2e.tar.bz2 |
ath10k: fix block comments style
Fix output from checkpatch.pl like:
Block comments use a trailing */ on a separate lin
Signed-off-by: Marcin Rokicki <marcin.rokicki@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/wireless/ath/ath10k/core.c | 9 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/debug.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/htc.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/htt_rx.c | 9 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/htt_tx.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/mac.c | 43 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/pci.c | 12 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/thermal.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/txrx.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.c | 16 |
10 files changed, 69 insertions, 38 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 85a14e2b3d04..1b4c08b5eaa9 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -1645,7 +1645,8 @@ static void ath10k_core_restart(struct work_struct *work) break; case ATH10K_STATE_OFF: /* this can happen if driver is being unloaded - * or if the crash happens during FW probing */ + * or if the crash happens during FW probing + */ ath10k_warn(ar, "cannot restart a device that hasn't been started\n"); break; case ATH10K_STATE_RESTARTING: @@ -2173,7 +2174,8 @@ EXPORT_SYMBOL(ath10k_core_stop); /* mac80211 manages fw/hw initialization through start/stop hooks. However in * order to know what hw capabilities should be advertised to mac80211 it is * necessary to load the firmware (and tear it down immediately since start - * hook will try to init it again) before registering */ + * hook will try to init it again) before registering + */ static int ath10k_core_probe_fw(struct ath10k *ar) { struct bmi_target_info target_info; @@ -2367,7 +2369,8 @@ void ath10k_core_unregister(struct ath10k *ar) /* We must unregister from mac80211 before we stop HTC and HIF. * Otherwise we will fail to submit commands to FW and mac80211 will be - * unhappy about callback failures. */ + * unhappy about callback failures. + */ ath10k_mac_unregister(ar); ath10k_testmode_destroy(ar); diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 1339cc383797..8cda518d1150 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -1982,7 +1982,8 @@ void ath10k_debug_stop(struct ath10k *ar) /* Must not use _sync to avoid deadlock, we do that in * ath10k_debug_destroy(). The check for htt_stats_mask is to avoid - * warning from del_timer(). */ + * warning from del_timer(). + */ if (ar->debug.htt_stats_mask != 0) cancel_delayed_work(&ar->debug.htt_stats_dwork); diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index f56f60462b33..b7669b2e94aa 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -422,7 +422,8 @@ static void ath10k_htc_control_rx_complete(struct ath10k *ar, struct sk_buff *skb) { /* This is unexpected. FW is not supposed to send regular rx on this - * endpoint. */ + * endpoint. + */ ath10k_warn(ar, "unexpected htc rx\n"); kfree_skb(skb); } diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 02a3fc81fbe3..3448a3ce5919 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -177,7 +177,8 @@ static void ath10k_htt_rx_msdu_buff_replenish(struct ath10k_htt *htt) * automatically balances load wrt to CPU power. * * This probably comes at a cost of lower maximum throughput but - * improves the average and stability. */ + * improves the average and stability. + */ spin_lock_bh(&htt->rx_ring.lock); num_deficit = htt->rx_ring.fill_level - htt->rx_ring.fill_cnt; num_to_fill = min(ATH10K_HTT_MAX_NUM_REFILL, num_deficit); @@ -304,7 +305,8 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt, rx_desc = (struct htt_rx_desc *)msdu->data; /* FIXME: we must report msdu payload since this is what caller - * expects now */ + * expects now + */ skb_put(msdu, offsetof(struct htt_rx_desc, msdu_payload)); skb_pull(msdu, offsetof(struct htt_rx_desc, msdu_payload)); @@ -639,7 +641,8 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar, case HTT_RX_VHT: case HTT_RX_VHT_WITH_TXBF: /* VHT-SIG-A1 in info2, VHT-SIG-A2 in info3 - TODO check this */ + * TODO check this + */ bw = info2 & 3; sgi = info3 & 1; group_id = (info2 >> 4) & 0x3F; diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index 86b427f5e2bc..685faac1368f 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -526,7 +526,8 @@ int ath10k_htt_h2t_stats_req(struct ath10k_htt *htt, u8 mask, u64 cookie) memset(req, 0, sizeof(*req)); /* currently we support only max 8 bit masks so no need to worry - * about endian support */ + * about endian support + */ req->upload_types[0] = mask; req->reset_types[0] = mask; req->stat_type = HTT_STATS_REQ_CFG_STAT_TYPE_INVALID; @@ -1008,7 +1009,8 @@ int ath10k_htt_tx(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txmode, * There is simply no point in pushing HTT TX_FRM through HTC tx path * as it's a waste of resources. By bypassing HTC it is possible to * avoid extra memory allocations, compress data structures and thus - * improve performance. */ + * improve performance. + */ txbuf->htc_hdr.eid = htt->eid; txbuf->htc_hdr.len = __cpu_to_le16(sizeof(txbuf->cmd_hdr) + diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index ddabec8022f4..9dc06832b7f1 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -457,7 +457,8 @@ static int ath10k_clear_vdev_key(struct ath10k_vif *arvif, for (;;) { /* since ath10k_install_key we can't hold data_lock all the - * time, so we try to remove the keys incrementally */ + * time, so we try to remove the keys incrementally + */ spin_lock_bh(&ar->data_lock); i = 0; list_for_each_entry(peer, &ar->peers, list) { @@ -609,7 +610,8 @@ static u8 ath10k_parse_mpdudensity(u8 mpdudensity) case 2: case 3: /* Our lower layer calculations limit our precision to - 1 microsecond */ + * 1 microsecond + */ return 1; case 4: return 2; @@ -978,7 +980,8 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) arg.channel.band_center_freq2 = chandef->center_freq2; /* TODO setup this dynamically, what in case we - don't have any vifs? */ + * don't have any vifs? + */ arg.channel.mode = chan_to_phymode(chandef); arg.channel.chan_radar = !!(channel->flags & IEEE80211_CHAN_RADAR); @@ -2373,9 +2376,10 @@ static int ath10k_peer_assoc_qos_ap(struct ath10k *ar, } /* TODO setup this based on STA listen interval and - beacon interval. Currently we don't know - sta->listen_interval - mac80211 patch required. - Currently use 10 seconds */ + * beacon interval. Currently we don't know + * sta->listen_interval - mac80211 patch required. + * Currently use 10 seconds + */ ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr, WMI_AP_PS_PEER_PARAM_AGEOUT_TIME, 10); @@ -2480,7 +2484,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar, /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to * zero in VHT IE. Using it would result in degraded throughput. * arg->peer_max_mpdu at this point contains HT max_mpdu so keep - * it if VHT max_mpdu is smaller. */ + * it if VHT max_mpdu is smaller. + */ arg->peer_max_mpdu = max(arg->peer_max_mpdu, (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR + ampdu_factor)) - 1); @@ -2793,7 +2798,8 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw, } /* ap_sta must be accessed only within rcu section which must be left - * before calling ath10k_setup_peer_smps() which might sleep. */ + * before calling ath10k_setup_peer_smps() which might sleep. + */ ht_cap = ap_sta->ht_cap; vht_cap = ap_sta->vht_cap; @@ -3064,7 +3070,8 @@ static int ath10k_update_channel_list(struct ath10k *ar) /* FIXME: why use only legacy modes, why not any * HT/VHT modes? Would that even make any - * difference? */ + * difference? + */ if (channel->band == NL80211_BAND_2GHZ) ch->mode = MODE_11G; else @@ -3128,7 +3135,8 @@ static void ath10k_regd_update(struct ath10k *ar) } /* Target allows setting up per-band regdomain but ath_common provides - * a combined one only */ + * a combined one only + */ ret = ath10k_wmi_pdev_set_regdomain(ar, regpair->reg_domain, regpair->reg_domain, /* 2ghz */ @@ -3677,7 +3685,8 @@ void ath10k_offchan_tx_work(struct work_struct *work) * never transmitted. We delete the peer upon tx completion. * It is unlikely that a peer for offchannel tx will already be * present. However it may be in some rare cases so account for that. - * Otherwise we might remove a legitimate peer and break stuff. */ + * Otherwise we might remove a legitimate peer and break stuff. + */ for (;;) { skb = skb_dequeue(&ar->offchan_tx_queue); @@ -5717,7 +5726,8 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, } /* the peer should not disappear in mid-way (unless FW goes awry) since - * we already hold conf_mutex. we just make sure its there now. */ + * we already hold conf_mutex. we just make sure its there now. + */ spin_lock_bh(&ar->data_lock); peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); spin_unlock_bh(&ar->data_lock); @@ -5729,8 +5739,7 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, ret = -EOPNOTSUPP; goto exit; } else { - /* if the peer doesn't exist there is no key to disable - * anymore */ + /* if the peer doesn't exist there is no key to disable anymore */ goto exit; } } @@ -6589,7 +6598,8 @@ static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, long time_left; /* mac80211 doesn't care if we really xmit queued frames or not - * we'll collect those frames either way if we stop/delete vdevs */ + * we'll collect those frames either way if we stop/delete vdevs + */ if (drop) return; @@ -6640,7 +6650,8 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw, mutex_lock(&ar->conf_mutex); /* If device failed to restart it will be in a different state, e.g. - * ATH10K_STATE_WEDGED */ + * ATH10K_STATE_WEDGED + */ if (ar->state == ATH10K_STATE_RESTARTED) { ath10k_info(ar, "device successfully recovered\n"); ar->state = ATH10K_STATE_ON; diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 52896c20ca4e..b20b66d9d7bc 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -720,14 +720,16 @@ void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar) { /* IMPORTANT: INTR_CLR register has to be set after * INTR_ENABLE is set to 0, otherwise interrupt can not be - * really cleared. */ + * really cleared. + */ ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS, 0); ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_CLR_ADDRESS, PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL); /* IMPORTANT: this extra read transaction is required to - * flush the posted write buffer. */ + * flush the posted write buffer. + */ (void)ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS); } @@ -739,7 +741,8 @@ void ath10k_pci_enable_legacy_irq(struct ath10k *ar) PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL); /* IMPORTANT: this extra read transaction is required to - * flush the posted write buffer. */ + * flush the posted write buffer. + */ (void)ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS); } @@ -2908,7 +2911,8 @@ static int ath10k_pci_init_irq(struct ath10k *ar) * host won't know when target writes BAR to CORE_CTRL. * This write might get lost if target has NOT written BAR. * For now, fix the race by repeating the write in below - * synchronization checking. */ + * synchronization checking. + */ ar_pci->oper_irq_mode = ATH10K_PCI_IRQ_LEGACY; ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS, diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c index 0a47269be289..f719d7d43cb0 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.c +++ b/drivers/net/wireless/ath/ath10k/thermal.c @@ -191,7 +191,8 @@ int ath10k_thermal_register(struct ath10k *ar) return 0; /* Avoid linking error on devm_hwmon_device_register_with_groups, I - * guess linux/hwmon.h is missing proper stubs. */ + * guess linux/hwmon.h is missing proper stubs. + */ if (!IS_REACHABLE(CONFIG_HWMON)) return 0; diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c index 9852c5d51139..d4986f626c35 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.c +++ b/drivers/net/wireless/ath/ath10k/txrx.c @@ -34,7 +34,8 @@ static void ath10k_report_offchan_tx(struct ath10k *ar, struct sk_buff *skb) /* If the original wait_for_completion() timed out before * {data,mgmt}_tx_completed() was called then we could complete * offchan_tx_completed for a different skb. Prevent this by using - * offchan_tx_skb. */ + * offchan_tx_skb. + */ spin_lock_bh(&ar->data_lock); if (ar->offchan_tx_skb != skb) { ath10k_warn(ar, "completed old offchannel frame\n"); diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 4e60caec7ab4..6afc8d27f0d5 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -3210,7 +3210,8 @@ static void ath10k_wmi_update_tim(struct ath10k *ar, tim_len = tim_info->tim_len ? __le32_to_cpu(tim_info->tim_len) : 1; /* if next SWBA has no tim_changed the tim_bitmap is garbage. - * we must copy the bitmap upon change and reuse it later */ + * we must copy the bitmap upon change and reuse it later + */ if (__le32_to_cpu(tim_info->tim_changed)) { int i; @@ -3529,7 +3530,8 @@ void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb) * before telling mac80211 to decrement CSA counter * * Once CSA counter is completed stop sending beacons until - * actual channel switch is done */ + * actual channel switch is done + */ if (arvif->vif->csa_active && ieee80211_csa_is_complete(arvif->vif)) { ieee80211_csa_finish(arvif->vif); @@ -3691,7 +3693,8 @@ radar_detected: ATH10K_DFS_STAT_INC(ar, radar_detected); /* Control radar events reporting in debugfs file - dfs_block_radar_events */ + * dfs_block_radar_events + */ if (ar->dfs_block_radar_events) { ath10k_info(ar, "DFS Radar detected, but ignored as requested\n"); return; @@ -4769,9 +4772,10 @@ static void ath10k_wmi_event_service_ready_work(struct work_struct *work) num_units = ar->max_num_peers + 1; } else if (num_unit_info & NUM_UNITS_IS_NUM_PEERS) { /* number of units to allocate is number of - * peers, 1 extra for self peer on target */ - /* this needs to be tied, host and target - * can get out of sync */ + * peers, 1 extra for self peer on target + * this needs to be tied, host and target + * can get out of sync + */ num_units = ar->max_num_peers + 1; } else if (num_unit_info & NUM_UNITS_IS_NUM_VDEVS) { num_units = ar->max_num_vdevs + 1; |