diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-08-05 09:48:22 -0400 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-08-05 09:48:22 -0400 |
| commit | 6c84239d595dc6ffe39f0f03dae2f64ed200db95 (patch) | |
| tree | 3aea4368a644be16e44612c964aa26152854e1ae /drivers | |
| parent | d4c06c708123c652025d04fe77b7e39448077395 (diff) | |
| parent | 6f367788d6333a41fefd013975b0b160d5c0a1c8 (diff) | |
| download | linux-6c84239d595dc6ffe39f0f03dae2f64ed200db95.tar.bz2 | |
Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"RTC for 4.8
Cleanups:
- huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
- move mn10300 to rtc-cmos
Subsystem:
- fix wakealarms after hibernate
- multiples fixes for rctest
- simplify implementations of .read_alarm
New drivers:
- Maxim MAX6916
Drivers:
- ds1307: fix weekday
- m41t80: add wakeup support
- pcf85063: add support for PCF85063A variant
- rv8803: extend i2c fix and other fixes
- s35390a: fix alarm reading, this fixes instant reboot after
shutdown for QNAP TS-41x
- s3c: clock fixes"
* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
rtc: rv8803: Clear V1F when setting the time
rtc: rv8803: Stop the clock while setting the time
rtc: rv8803: Always apply the I²C workaround
rtc: rv8803: Fix read day of week
rtc: rv8803: Remove the check for valid time
rtc: rv8803: Kconfig: Indicate rx8900 support
rtc: asm9260: remove .owner field for driver
rtc: at91sam9: Fix missing spin_lock_init()
rtc: m41t80: add suspend handlers for alarm IRQ
rtc: m41t80: make it a real error message
rtc: pcf85063: Add support for the PCF85063A device
rtc: pcf85063: fix year range
rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
rtc: s3c: Remove unnecessary call to disable already disabled clock
rtc: abx80x: use devm_add_action_or_reset()
rtc: m41t80: use devm_add_action_or_reset()
rtc: fix a typo and reduce three empty lines to one
rtc: s35390a: improve two comments in .set_alarm
...
Diffstat (limited to 'drivers')
44 files changed, 840 insertions, 944 deletions
diff --git a/drivers/acpi/acpi_cmos_rtc.c b/drivers/acpi/acpi_cmos_rtc.c index 81dc75033f15..0980a133916f 100644 --- a/drivers/acpi/acpi_cmos_rtc.c +++ b/drivers/acpi/acpi_cmos_rtc.c @@ -14,7 +14,7 @@ #include <linux/err.h> #include <linux/kernel.h> #include <linux/module.h> -#include <asm-generic/rtc.h> +#include <linux/mc146818rtc.h> #include "internal.h" diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index a6975795e7f3..efec10b49d59 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -11,7 +11,7 @@ #include <linux/export.h> #include <linux/rtc.h> -#include <asm/rtc.h> +#include <linux/mc146818rtc.h> #include "power.h" @@ -103,7 +103,7 @@ static int set_magic_time(unsigned int user, unsigned int file, unsigned int dev n /= 24; time.tm_min = (n % 20) * 3; n /= 20; - set_rtc_time(&time); + mc146818_set_time(&time); return n ? -1 : 0; } @@ -112,7 +112,7 @@ static unsigned int read_magic_time(void) struct rtc_time time; unsigned int val; - get_rtc_time(&time); + mc146818_get_time(&time); pr_info("RTC time: %2d:%02d:%02d, date: %02d/%02d/%02d\n", time.tm_hour, time.tm_min, time.tm_sec, time.tm_mon + 1, time.tm_mday, time.tm_year % 100); diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index fdb8f3e10b6f..dcc09739a54e 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -293,7 +293,7 @@ if RTC_LIB=n config RTC tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" - depends on ALPHA || (MIPS && MACH_LOONGSON64) || MN10300 + depends on ALPHA || (MIPS && MACH_LOONGSON64) ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -339,32 +339,6 @@ config JS_RTC To compile this driver as a module, choose M here: the module will be called js-rtc. -config GEN_RTC - tristate "Generic /dev/rtc emulation" - depends on RTC!=y - depends on ALPHA || M68K || MN10300 || PARISC || PPC || X86 - ---help--- - If you say Y here and create a character special file /dev/rtc with - major number 10 and minor number 135 using mknod ("man mknod"), you - will get access to the real time clock (or hardware clock) built - into your computer. - - It reports status information via the file /proc/driver/rtc and its - behaviour is set by various ioctls on /dev/rtc. If you enable the - "extended RTC operation" below it will also provide an emulation - for RTC_UIE which is required by some programs and may improve - precision in some cases. - - To compile this driver as a module, choose M here: the - module will be called genrtc. - -config GEN_RTC_X - bool "Extended RTC operation" - depends on GEN_RTC - help - Provides an emulation for RTC_UIE which is required by some programs - and may improve precision of the generic RTC support in some cases. - config EFI_RTC bool "EFI Real Time Clock Services" depends on IA64 diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 55d16bf3ccc5..6e6c244a66a0 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_APPLICOM) += applicom.o obj-$(CONFIG_SONYPI) += sonypi.o obj-$(CONFIG_RTC) += rtc.o obj-$(CONFIG_HPET) += hpet.o -obj-$(CONFIG_GEN_RTC) += genrtc.o obj-$(CONFIG_EFI_RTC) += efirtc.o obj-$(CONFIG_DS1302) += ds1302.o obj-$(CONFIG_XILINX_HWICAP) += xilinx_hwicap/ diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c deleted file mode 100644 index 4f943759d376..000000000000 --- a/drivers/char/genrtc.c +++ /dev/null @@ -1,539 +0,0 @@ -/* - * Real Time Clock interface for - * - q40 and other m68k machines, - * - HP PARISC machines - * - PowerPC machines - * emulate some RTC irq capabilities in software - * - * Copyright (C) 1999 Richard Zidlicky - * - * based on Paul Gortmaker's rtc.c device and - * Sam Creasey Generic rtc driver - * - * This driver allows use of the real time clock (built into - * nearly all computers) from user space. It exports the /dev/rtc - * interface supporting various ioctl() and also the /proc/driver/rtc - * pseudo-file for status information. - * - * The ioctls can be used to set the interrupt behaviour where - * supported. - * - * The /dev/rtc interface will block on reads until an interrupt - * has been received. If a RTC interrupt has already happened, - * it will output an unsigned long and then block. The output value - * contains the interrupt status in the low byte and the number of - * interrupts since the last read in the remaining high bytes. The - * /dev/rtc interface can also be used with the select(2) call. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - - * 1.01 fix for 2.3.X rz@linux-m68k.org - * 1.02 merged with code from genrtc.c rz@linux-m68k.org - * 1.03 make it more portable zippel@linux-m68k.org - * 1.04 removed useless timer code rz@linux-m68k.org - * 1.05 portable RTC_UIE emulation rz@linux-m68k.org - * 1.06 set_rtc_time can return an error trini@kernel.crashing.org - * 1.07 ported to HP PARISC (hppa) Helge Deller <deller@gmx.de> - */ - -#define RTC_VERSION "1.07" - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/miscdevice.h> -#include <linux/fcntl.h> - -#include <linux/rtc.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/mutex.h> -#include <linux/workqueue.h> - -#include <asm/uaccess.h> -#include <asm/rtc.h> - -/* - * We sponge a minor off of the misc major. No need slurping - * up another valuable major dev number for this. If you add - * an ioctl, make sure you don't conflict with SPARC's RTC - * ioctls. - */ - -static DEFINE_MUTEX(gen_rtc_mutex); -static DECLARE_WAIT_QUEUE_HEAD(gen_rtc_wait); - -/* - * Bits in gen_rtc_status. - */ - -#define RTC_IS_OPEN 0x01 /* means /dev/rtc is in use */ - -static unsigned char gen_rtc_status; /* bitmapped status byte. */ -static unsigned long gen_rtc_irq_data; /* our output to the world */ - -/* months start at 0 now */ -static unsigned char days_in_mo[] = -{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -static int irq_active; - -#ifdef CONFIG_GEN_RTC_X -static struct work_struct genrtc_task; -static struct timer_list timer_task; - -static unsigned int oldsecs; -static int lostint; -static unsigned long tt_exp; - -static void gen_rtc_timer(unsigned long data); - -static volatile int stask_active; /* schedule_work */ -static volatile int ttask_active; /* timer_task */ -static int stop_rtc_timers; /* don't requeue tasks */ -static DEFINE_SPINLOCK(gen_rtc_lock); - -static void gen_rtc_interrupt(unsigned long arg); - -/* - * Routine to poll RTC seconds field for change as often as possible, - * after first RTC_UIE use timer to reduce polling - */ -static void genrtc_troutine(struct work_struct *work) -{ - unsigned int tmp = get_rtc_ss(); - - if (stop_rtc_timers) { - stask_active = 0; - return; - } - - if (oldsecs != tmp){ - oldsecs = tmp; - - timer_task.function = gen_rtc_timer; - timer_task.expires = jiffies + HZ - (HZ/10); - tt_exp=timer_task.expires; - ttask_active=1; - stask_active=0; - add_timer(&timer_task); - - gen_rtc_interrupt(0); - } else if (schedule_work(&genrtc_task) == 0) - stask_active = 0; -} - -static void gen_rtc_timer(unsigned long data) -{ - lostint = get_rtc_ss() - oldsecs ; - if (lostint<0) - lostint = 60 - lostint; - if (time_after(jiffies, tt_exp)) - printk(KERN_INFO "genrtc: timer task delayed by %ld jiffies\n", - jiffies-tt_exp); - ttask_active=0; - stask_active=1; - if ((schedule_work(&genrtc_task) == 0)) - stask_active = 0; -} - -/* - * call gen_rtc_interrupt function to signal an RTC_UIE, - * arg is unused. - * Could be invoked either from a real interrupt handler or - * from some routine that periodically (eg 100HZ) monitors - * whether RTC_SECS changed - */ -static void gen_rtc_interrupt(unsigned long arg) -{ - /* We store the status in the low byte and the number of - * interrupts received since the last read in the remainder - * of rtc_irq_data. */ - - gen_rtc_irq_data += 0x100; - gen_rtc_irq_data &= ~0xff; - gen_rtc_irq_data |= RTC_UIE; - - if (lostint){ - printk("genrtc: system delaying clock ticks?\n"); - /* increment count so that userspace knows something is wrong */ - gen_rtc_irq_data += ((lostint-1)<<8); - lostint = 0; - } - - wake_up_interruptible(&gen_rtc_wait); -} - -/* - * Now all the various file operations that we export. - */ -static ssize_t gen_rtc_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - unsigned long data; - ssize_t retval; - - if (count != sizeof (unsigned int) && count != sizeof (unsigned long)) - return -EINVAL; - - if (file->f_flags & O_NONBLOCK && !gen_rtc_irq_data) - return -EAGAIN; - - retval = wait_event_interruptible(gen_rtc_wait, - (data = xchg(&gen_rtc_irq_data, 0))); - if (retval) - goto out; - - /* first test allows optimizer to nuke this case for 32-bit machines */ - if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) { - unsigned int uidata = data; - retval = put_user(uidata, (unsigned int __user *)buf) ?: - sizeof(unsigned int); - } - else { - retval = put_user(data, (unsigned long __user *)buf) ?: - sizeof(unsigned long); - } -out: - return retval; -} - -static unsigned int gen_rtc_poll(struct file *file, - struct poll_table_struct *wait) -{ - poll_wait(file, &gen_rtc_wait, wait); - if (gen_rtc_irq_data != 0) - return POLLIN | POLLRDNORM; - return 0; -} - -#endif - -/* - * Used to disable/enable interrupts, only RTC_UIE supported - * We also clear out any old irq data after an ioctl() that - * meddles with the interrupt enable/disable bits. - */ - -static inline void gen_clear_rtc_irq_bit(unsigned char bit) -{ -#ifdef CONFIG_GEN_RTC_X - stop_rtc_timers = 1; - if (ttask_active){ - del_timer_sync(&timer_task); - ttask_active = 0; - } - while (stask_active) - schedule(); - - spin_lock(&gen_rtc_lock); - irq_active = 0; - spin_unlock(&gen_rtc_lock); -#endif -} - -static inline int gen_set_rtc_irq_bit(unsigned char bit) -{ -#ifdef CONFIG_GEN_RTC_X - spin_lock(&gen_rtc_lock); - if ( !irq_active ) { - irq_active = 1; - stop_rtc_timers = 0; - lostint = 0; - INIT_WORK(&genrtc_task, genrtc_troutine); - oldsecs = get_rtc_ss(); - init_timer(&timer_task); - - stask_active = 1; - if (schedule_work(&genrtc_task) == 0){ - stask_active = 0; - } - } - spin_unlock(&gen_rtc_lock); - gen_rtc_irq_data = 0; - return 0; -#else - return -EINVAL; -#endif -} - -static int gen_rtc_ioctl(struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct rtc_time wtime; - struct rtc_pll_info pll; - void __user *argp = (void __user *)arg; - - switch (cmd) { - - case RTC_PLL_GET: - if (get_rtc_pll(&pll)) - return -EINVAL; - else - return copy_to_user(argp, &pll, sizeof pll) ? -EFAULT : 0; - - case RTC_PLL_SET: - if (!capable(CAP_SYS_TIME)) - return -EACCES; - if (copy_from_user(&pll, argp, sizeof(pll))) - return -EFAULT; - return set_rtc_pll(&pll); - - case RTC_UIE_OFF: /* disable ints from RTC updates. */ - gen_clear_rtc_irq_bit(RTC_UIE); - return 0; - - case RTC_UIE_ON: /* enable ints for RTC updates. */ - return gen_set_rtc_irq_bit(RTC_UIE); - - case RTC_RD_TIME: /* Read the time/date from RTC */ - /* this doesn't get week-day, who cares */ - memset(&wtime, 0, sizeof(wtime)); - get_rtc_time(&wtime); - - return copy_to_user(argp, &wtime, sizeof(wtime)) ? -EFAULT : 0; - - case RTC_SET_TIME: /* Set the RTC */ - { - int year; - unsigned char leap_yr; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&wtime, argp, sizeof(wtime))) - return -EFAULT; - - year = wtime.tm_year + 1900; - leap_yr = ((!(year % 4) && (year % 100)) || - !(year % 400)); - - if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) || (wtime.tm_mday < 1)) - return -EINVAL; - - if (wtime.tm_mday < 0 || wtime.tm_mday > - (days_in_mo[wtime.tm_mon] + ((wtime.tm_mon == 1) && leap_yr))) - return -EINVAL; - - if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 || - wtime.tm_min < 0 || wtime.tm_min >= 60 || - wtime.tm_sec < 0 || wtime.tm_sec >= 60) - return -EINVAL; - - return set_rtc_time(&wtime); - } - } - - return -EINVAL; -} - -static long gen_rtc_unlocked_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - int ret; - - mutex_lock(&gen_rtc_mutex); - ret = gen_rtc_ioctl(file, cmd, arg); - mutex_unlock(&gen_rtc_mutex); - - return ret; -} - -/* - * We enforce only one user at a time here with the open/close. - * Also clear the previous interrupt data on an open, and clean - * up things on a close. - */ - -static int gen_rtc_open(struct inode *inode, struct file *file) -{ - mutex_lock(&gen_rtc_mutex); - if (gen_rtc_status & RTC_IS_OPEN) { - mutex_unlock(&gen_rtc_mutex); - return -EBUSY; - } - - gen_rtc_status |= RTC_IS_OPEN; - gen_rtc_irq_data = 0; - irq_active = 0; - mutex_unlock(&gen_rtc_mutex); - - return 0; -} - -static int gen_rtc_release(struct inode *inode, struct file *file) -{ - /* - * Turn off all interrupts once the device is no longer - * in use and clear the data. - */ - - gen_clear_rtc_irq_bit(RTC_PIE|RTC_AIE|RTC_UIE); - - gen_rtc_status &= ~RTC_IS_OPEN; - return 0; -} - - -#ifdef CONFIG_PROC_FS - -/* - * Info exported via "/proc/driver/rtc". - */ - -static int gen_rtc_proc_show(struct seq_file *m, void *v) -{ - struct rtc_time tm; - unsigned int flags; - struct rtc_pll_info pll; - - flags = get_rtc_time(&tm); - - seq_printf(m, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04u\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, 1900); - - tm.tm_hour = tm.tm_min = tm.tm_sec = 0; - - seq_puts(m, "alarm\t\t: "); - if (tm.tm_hour <= 24) - seq_printf(m, "%02d:", tm.tm_hour); - else - seq_puts(m, "**:"); - - if (tm.tm_min <= 59) - seq_printf(m, "%02d:", tm.tm_min); - else - seq_puts(m, "**:"); - - if (tm.tm_sec <= 59) - seq_printf(m, "%02d\n", tm.tm_sec); - else - seq_puts(m, "**\n"); - - seq_printf(m, - "DST_enable\t: %s\n" - "BCD\t\t: %s\n" - "24hr\t\t: %s\n" - "square_wave\t: %s\n" - "alarm_IRQ\t: %s\n" - "update_IRQ\t: %s\n" - "periodic_IRQ\t: %s\n" - "periodic_freq\t: %ld\n" - "batt_status\t: %s\n", - (flags & RTC_DST_EN) ? "yes" : "no", - (flags & RTC_DM_BINARY) ? "no" : "yes", - (flags & RTC_24H) ? "yes" : "no", - (flags & RTC_SQWE) ? "yes" : "no", - (flags & RTC_AIE) ? "yes" : "no", - irq_active ? "yes" : "no", - (flags & RTC_PIE) ? "yes" : "no", - 0L /* freq */, - (flags & RTC_BATT_BAD) ? "bad" : "okay"); - if (!get_rtc_pll(&pll)) - seq_printf(m, - "PLL adjustment\t: %d\n" - "PLL max +ve adjustment\t: %d\n" - "PLL max -ve adjustment\t: %d\n" - "PLL +ve adjustment factor\t: %d\n" - "PLL -ve adjustment factor\t: %d\n" - "PLL frequency\t: %ld\n", - pll.pll_value, - pll.pll_max, - pll.pll_min, - pll.pll_posmult, - pll.pll_negmult, - pll.pll_clock); - return 0; -} - -static int gen_rtc_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, gen_rtc_proc_show, NULL); -} - -static const struct file_operations gen_rtc_proc_fops = { - .open = gen_rtc_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init gen_rtc_proc_init(void) -{ - struct proc_dir_entry *r; - - r = proc_create("driver/rtc", 0, NULL, &gen_rtc_proc_fops); - if (!r) - return -ENOMEM; - return 0; -} -#else -static inline int gen_rtc_proc_init(void) { return 0; } -#endif /* CONFIG_PROC_FS */ - - -/* - * The various file operations we support. - */ - -static const struct file_operations gen_rtc_fops = { - .owner = THIS_MODULE, -#ifdef CONFIG_GEN_RTC_X - .read = gen_rtc_read, - .poll = gen_rtc_poll, -#endif - .unlocked_ioctl = gen_rtc_unlocked_ioctl, - .open = gen_rtc_open, - .release = gen_rtc_release, - .llseek = noop_llseek, -}; - -static struct miscdevice rtc_gen_dev = -{ - .minor = RTC_MINOR, - .name = "rtc", - .fops = &gen_rtc_fops, -}; - -static int __init rtc_generic_init(void) -{ - int retval; - - printk(KERN_INFO "Generic RTC Driver v%s\n", RTC_VERSION); - - retval = misc_register(&rtc_gen_dev); - if (retval < 0) - return retval; - - retval = gen_rtc_proc_init(); - if (retval) { - misc_deregister(&rtc_gen_dev); - return retval; - } - - return 0; -} - -static void __exit rtc_generic_exit(void) -{ - remove_proc_entry ("driver/rtc", NULL); - misc_deregister(&rtc_gen_dev); -} - - -module_init(rtc_generic_init); -module_exit(rtc_generic_exit); - -MODULE_AUTHOR("Richard Zidlicky"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(RTC_MINOR); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 18639e0cb6e2..e215f50794b6 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -5,6 +5,10 @@ config RTC_LIB bool +config RTC_MC146818_LIB + bool + select RTC_LIB + menuconfig RTC_CLASS bool "Real Time Clock" default n @@ -574,10 +578,10 @@ config RTC_DRV_EM3027 will be called rtc-em3027. config RTC_DRV_RV8803 - tristate "Micro Crystal RV8803" + tristate "Micro Crystal RV8803, Epson RX8900" help - If you say yes here you get support for the Micro Crystal - RV8803 RTC chips. + If you say yes here you get support for the Micro Crystal RV8803 and + Epson RX8900 RTC chips. This driver can also be built as a module. If so, the module will be called rtc-rv8803. @@ -670,6 +674,18 @@ config RTC_DRV_DS1390 This driver can also be built as a module. If so, the module will be called rtc-ds1390. +config RTC_DRV_MAX6916 + tristate "Maxim MAX6916" + help + If you say yes here you will get support for the + Maxim MAX6916 SPI RTC chip. + + This driver only supports the RTC feature, and not other chip + features such as alarms. + + This driver can also be built as a module. If so, the module + will be called rtc-max6916. + config RTC_DRV_R9701 tristate "Epson RTC-9701JE" help @@ -795,8 +811,9 @@ comment "Platform RTC drivers" config RTC_DRV_CMOS tristate "PC-style 'CMOS'" - depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 + depends on X86 || ARM || M32R || PPC || MIPS || SPARC64 || MN10300 default y if X86 + select RTC_MC146818_LIB help Say "yes" here to get direct support for the real time clock found in every PC or ACPI-based system, and some other boards. @@ -815,6 +832,7 @@ config RTC_DRV_CMOS config RTC_DRV_ALPHA bool "Alpha PC-style CMOS" depends on ALPHA + select RTC_MC146818_LIB default y help Direct support for the real-time clock found on every Alpha diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index ea2833723fa9..7cf7ad559c79 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_RTC_LIB) += rtc-lib.o obj-$(CONFIG_RTC_HCTOSYS) += hctosys.o obj-$(CONFIG_RTC_SYSTOHC) += systohc.o obj-$(CONFIG_RTC_CLASS) += rtc-core.o +obj-$(CONFIG_RTC_MC146818_LIB) += rtc-mc146818-lib.o rtc-core-y := class.o interface.o ifdef CONFIG_RTC_DRV_EFI @@ -85,6 +86,7 @@ obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o +obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o obj-$(CONFIG_RTC_DRV_MAX8907) += rtc-max8907.o obj-$(CONFIG_RTC_DRV_MAX8925) += rtc-max8925.o diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 9ef5f6f89f98..84a52db9b05f 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -104,7 +104,17 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al else if (!rtc->ops->read_alarm) err = -EINVAL; else { - memset(alarm, 0, sizeof(struct rtc_wkalrm)); + alarm->enabled = 0; + alarm->pending = 0; + alarm->time.tm_sec = -1; + alarm->time.tm_min = -1; + alarm->time.tm_hour = -1; + alarm->time.tm_mday = -1; + alarm->time.tm_mon = -1; + alarm->time.tm_year = -1; + alarm->time.tm_wday = -1; + alarm->time.tm_yday = -1; + alarm->time.tm_isdst = -1; err = rtc->ops->read_alarm(rtc->dev.parent, alarm); } @@ -383,7 +393,7 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) rtc->aie_timer.node.expires = rtc_tm_to_ktime(alarm->time); rtc->aie_timer.period = ktime_set(0, 0); - /* Alarm has to be enabled & in the futrure for us to enqueue it */ + /* Alarm has to be enabled & in the future for us to enqueue it */ if (alarm->enabled && (rtc_tm_to_ktime(now).tv64 < rtc->aie_timer.node.expires.tv64)) { @@ -395,8 +405,6 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } EXPORT_SYMBOL_GPL(rtc_initialize_alarm); - - int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled) { int err = mutex_lock_interruptible(&rtc->ops_lock); @@ -748,9 +756,23 @@ EXPORT_SYMBOL_GPL(rtc_irq_set_freq); */ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) { + struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue); + struct rtc_time tm; + ktime_t now; + timer->enabled = 1; + __rtc_read_time(rtc, &tm); + now = rtc_tm_to_ktime(tm); + + /* Skip over expired timers */ + while (next) { + if (next->expires.tv64 >= now.tv64) + break; + next = timerqueue_iterate_next(next); + } + timerqueue_add(&rtc->timerqueue, &timer->node); - if (&timer->node == timerqueue_getnext(&rtc->timerqueue)) { + if (!next) { struct rtc_wkalrm alarm; int err; alarm.time = rtc_ktime_to_tm(timer->node.expires); diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c index ba0d61934d35..fea9a60b06cf 100644 --- a/drivers/rtc/rtc-abx80x.c +++ b/drivers/rtc/rtc-abx80x.c @@ -643,17 +643,15 @@ static int abx80x_probe(struct i2c_client *client, return err; } - err = devm_add_action(&client->dev, rtc_calib_remove_sysfs_group, - &client->dev); - if (err) { - rtc_calib_remove_sysfs_group(&client->dev); + err = devm_add_action_or_reset(&client->dev, + rtc_calib_remove_sysfs_group, + &client->dev); + if (err) dev_err(&client->dev, "Failed to add sysfs cleanup action: %d\n", err); - return err; - } - return 0; + return err; } static int abx80x_remove(struct i2c_client *client) diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c index 355fdb97a006..5219916ce11d 100644 --- a/drivers/rtc/rtc-asm9260.c +++ b/drivers/rtc/rtc-asm9260.c @@ -343,7 +343,6 @@ static struct platform_driver asm9260_rtc_driver = { .remove = asm9260_rtc_remove, .driver = { .name = "asm9260-rtc", - .owner = THIS_MODULE, .of_match_table = asm9260_dt_ids, }, }; diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 99732e6f8c3b..7418a763ce52 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -375,6 +375,7 @@ static int at91_rtc_probe(struct platform_device *pdev) if (!rtc) return -ENOMEM; + spin_lock_init(&rtc->lock); rtc->irq = irq; /* platform setup code should have handled this; sigh */ diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index fbe9c72438e1..43745cac0141 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -43,7 +43,7 @@ #include <linux/of_platform.h> /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ -#include <asm-generic/rtc.h> +#include <linux/mc146818rtc.h> struct cmos_rtc { struct rtc_device *rtc; @@ -190,10 +190,10 @@ static inline void cmos_write_bank2(unsigned char val, unsigned char addr) static int cmos_read_time(struct device *dev, struct rtc_time *t) { /* REVISIT: if the clock has a "century" register, use - * that instead of the heuristic in get_rtc_time(). + * that instead of the heuristic in mc146818_get_time(). * That'll make Y3K compatility (year > 2070) easy! */ - get_rtc_time(t); + mc146818_get_time(t); return 0; } @@ -205,7 +205,7 @@ static int cmos_set_time(struct device *dev, struct rtc_time *t) * takes effect exactly 500ms after we write the register. * (Also queueing and other delays before we get this far.) */ - return set_rtc_time(t); + return mc146818_set_time(t); } static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t) @@ -220,8 +220,6 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t) * Some also support day and month, for alarms up to a year in * the future. */ - t->time.tm_mday = -1; - t->time.tm_mon = -1; spin_lock_irq(&rtc_lock); t->time.tm_sec = CMOS_READ(RTC_SECONDS_ALARM); @@ -272,7 +270,6 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t) } } } - t->time.tm_year = -1; t->enabled = !!(rtc_control & RTC_AIE); t->pending = 0; @@ -630,7 +627,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) address_space = 64; #elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \ || defined(__sparc__) || defined(__mips__) \ - || defined(__powerpc__) + || defined(__powerpc__) || defined(CONFIG_MN10300) address_space = 128; #else #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. @@ -1142,14 +1139,14 @@ static __init void cmos_of_init(struct platform_device *pdev) if (val) CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT); - get_rtc_time(&time); + cmos_read_time(&pdev->dev, &time); ret = rtc_valid_tm(&time); if (ret) { struct rtc_time def_time = { .tm_year = 1, .tm_mday = 1, }; - set_rtc_time(&def_time); + cmos_set_time(&pdev->dev, &def_time); } } #else diff --git a/drivers/rtc/rtc-da9052.c b/drivers/rtc/rtc-da9052.c index a20bcf0e33cd..4273377562ec 100644 --- a/drivers/rtc/rtc-da9052.c +++ b/drivers/rtc/rtc-da9052.c @@ -85,6 +85,7 @@ static int da9052_read_alarm(struct da9052_rtc *rtc, struct rtc_time *rtc_tm) rtc_tm->tm_mday = v[0][2] & DA9052_RTC_DAY; rtc_tm->tm_hour = v[0][1] & DA9052_RTC_HOUR; rtc_tm->tm_min = v[0][0] & DA9052_RTC_MIN; + rtc_tm->tm_sec = 0; ret = rtc_valid_tm(rtc_tm); return ret; diff --git a/drivers/rtc/rtc-da9055.c b/drivers/rtc/rtc-da9055.c index 7ec0872d5e3b..678af8648c45 100644 --- a/drivers/rtc/rtc-da9055.c +++ b/drivers/rtc/rtc-da9055.c @@ -74,6 +74,7 @@ static int da9055_read_alarm(struct da9055 *da9055, struct rtc_time *rtc_tm) rtc_tm->tm_mday = v[2] & DA9055_RTC_ALM_DAY; rtc_tm->tm_hour = v[1] & DA9055_RTC_ALM_HOUR; rtc_tm->tm_min = v[0] & DA9055_RTC_ALM_MIN; + rtc_tm->tm_sec = 0; return rtc_valid_tm(rtc_tm); } diff --git a/drivers/rtc/rtc-davinci.c b/drivers/rtc/rtc-davinci.c index c5432bf64e1c..dba60c1dfce2 100644 --- a/drivers/rtc/rtc-davinci.c +++ b/drivers/rtc/rtc-davinci.c @@ -388,6 +388,8 @@ static int davinci_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) u8 day0, day1; unsigned long flags; + alm->time.tm_sec = 0; + spin_lock_irqsave(&davinci_rtc_lock, flags); davinci_rtcss_calendar_wait(davinci_rtc); diff --git a/drivers/rtc/rtc-ds1286.c b/drivers/rtc/rtc-ds1286.c index 756e509f6ed2..ef75c349dff9 100644 --- a/drivers/rtc/rtc-ds1286.c +++ b/drivers/rtc/rtc-ds1286.c @@ -16,7 +16,7 @@ #include <linux/rtc.h> #include <linux/platform_device.h> #include <linux/bcd.h> -#include <linux/ds1286.h> +#include <linux/rtc/ds1286.h> #include <linux/io.h> #include <linux/slab.h> diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c index 8e41c4613e51..72b22935eb62 100644 --- a/drivers/rtc/rtc-ds1305.c +++ b/drivers/rtc/rtc-ds1305.c @@ -313,13 +313,6 @@ static int ds1305_get_alarm(struct device *dev, struct rtc_wkalrm *alm) alm->time.tm_sec = bcd2bin(buf[DS1305_SEC]); alm->time.tm_min = bcd2bin(buf[DS1305_MIN]); alm->time.tm_hour = bcd2hour(buf[DS1305_HOUR]); - alm->time.tm_mday = -1; - alm->time.tm_mon = -1; - alm->time.tm_year = -1; - /* next three fields are unused by Linux */ - alm->time.tm_wday = -1; - alm->time.tm_mday = -1; - alm->time.tm_isdst = -1; return 0; } diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 821d9c089cdb..8e1c5cb6ece6 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -482,11 +482,6 @@ static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t) t->time.tm_min = bcd2bin(ds1307->regs[1] & 0x7f); t->time.tm_hour = bcd2bin(ds1307->regs[2] & 0x3f); t->time.tm_mday = bcd2bin(ds1307->regs[3] & 0x3f); - t->time.tm_mon = -1; - t->time.tm_year = -1; - t->time.tm_wday = -1; - t->time.tm_yday = -1; - t->time.tm_isdst = -1; /* ... and status */ t->enabled = !!(ds1307->regs[7] & DS1337_BIT_A1IE); @@ -602,6 +597,8 @@ static const struct rtc_class_ops ds13xx_rtc_ops = { * Alarm support for mcp794xx devices. */ +#define MCP794XX_REG_WEEKDAY 0x3 +#define MCP794XX_REG_WEEKDAY_WDAY_MASK 0x7 #define MCP794XX_REG_CONTROL 0x07 # define MCP794XX_BIT_ALM0_EN 0x10 # define MCP794XX_BIT_ALM1_EN 0x20 @@ -1231,13 +1228,16 @@ static int ds1307_probe(struct i2c_client *client, { struct ds1307 *ds1307; int err = -ENODEV; - int tmp; + int tmp, wday; struct chip_desc *chip = &chips[id->driver_data]; struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); bool want_irq = false; bool ds1307_can_wakeup_device = false; unsigned char *buf; struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev); + struct rtc_time tm; + unsigned long timestamp; + irq_handler_t irq_handler = ds1307_irq; static const int bbsqi_bitpos[] = { @@ -1526,6 +1526,27 @@ read_rtc: bin2bcd(tmp)); } + /* + * Some IPs have weekday reset value = 0x1 which might not correct + * hence compute the wday using the current date/month/year values + */ + ds1307_get_time(&client->dev, &tm); + wday = tm.tm_wday; + timestamp = rtc_tm_to_time64(&tm); + rtc_time64_to_tm(timestamp, &tm); + + /* + * Check if reset wday is different from the computed wday + * If different then set the wday which we computed using + * timestamp + */ + if (wday != tm.tm_wday) { + wday = i2c_smbus_read_byte_data(client, MCP794XX_REG_WEEKDAY); + wday = wday & ~MCP794XX_REG_WEEKDAY_WDAY_MASK; + wday = wday | (tm.tm_wday + 1); + i2c_smbus_write_byte_data(client, MCP794XX_REG_WEEKDAY, wday); + } + if (want_irq) { device_set_wakeup_capable(&client->dev, true); set_bit(HAS_ALARM, &ds1307->flags); diff --git a/drivers/rtc/rtc-ds1343.c b/drivers/rtc/rtc-ds1343.c index 23fa9f0cb5e3..895fbeeb47fe 100644 --- a/drivers/rtc/rtc-ds1343.c +++ b/drivers/rtc/rtc-ds1343.c @@ -504,12 +504,6 @@ static int ds1343_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) alarm->time.tm_hour = priv->alarm_hour < 0 ? 0 : priv->alarm_hour; alarm->time.tm_mday = priv->alarm_mday < 0 ? 0 : priv->alarm_mday; - alarm->time.tm_mon = -1; - alarm->time.tm_year = -1; - alarm->time.tm_wday = -1; - alarm->time.tm_yday = -1; - alarm->time.tm_isdst = -1; - out: mutex_unlock(&priv->mutex); return res; diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c index b3ce3c652fcd..ed43b4311660 100644 --- a/drivers/rtc/rtc-ds1685.c +++ b/drivers/rtc/rtc-ds1685.c @@ -103,6 +103,26 @@ ds1685_rtc_bin2bcd(struct ds1685_priv *rtc, u8 val, u8 bin_mask, u8 bcd_mask) } /** + * s1685_rtc_check_mday - check validity of the day of month. + * @rtc: pointer to the ds1685 rtc structure. + * @mday: day of month. + * + * Returns -EDOM if the day of month is not within 1..31 range. + */ +static inline int +ds1685_rtc_check_mday(struct ds1685_priv *rtc, u8 mday) +{ + if (rtc->bcd_mode) { + if (mday < 0x01 || mday > 0x31 || (mday & 0x0f) > 0x09) + return -EDOM; + } else { + if (mday < 1 || mday > 31) + return -EDOM; + } + return 0; +} + +/** * ds1685_rtc_switch_to_bank0 - switch the rtc to bank 0. * @rtc: pointer to the ds1685 rtc structure. */ @@ -377,6 +397,7 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) struct platform_device *pdev = to_platform_device(dev); struct ds1685_priv *rtc = platform_get_drvdata(pdev); u8 seconds, minutes, hours, mday, ctrlb, ctrlc; + int ret; /* Fetch the alarm info from the RTC alarm registers. */ ds1685_rtc_begin_data_access(rtc); @@ -388,34 +409,29 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) ctrlc = rtc->read(rtc, RTC_CTRL_C); ds1685_rtc_end_data_access(rtc); - /* Check month date. */ - if (!(mday >= 1) && (mday <= 31)) - return -EDOM; + /* Check the month date for validity. */ + ret = ds1685_rtc_check_mday(rtc, mday); + if (ret) + return ret; /* * Check the three alarm bytes. * * The Linux RTC system doesn't support the "don't care" capability * of this RTC chip. We check for it anyways in case support is - * added in the future. + * added in the future and only assign when we care. */ - if (unlikely(seconds >= 0xc0)) - alrm->time.tm_sec = -1; - else + if (likely(seconds < 0xc0)) alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds, RTC_SECS_BCD_MASK, RTC_SECS_BIN_MASK); - if (unlikely(minutes >= 0xc0)) - alrm->time.tm_min = -1; - else + if (likely(minutes < 0xc0)) alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes, RTC_MINS_BCD_MASK, RTC_MINS_BIN_MASK); - if (unlikely(hours >= 0xc0)) - alrm->time.tm_hour = -1; - else + if (likely(hours < 0xc0)) alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours, RTC_HRS_24_BCD_MASK, RTC_HRS_24_BIN_MASK); @@ -423,11 +439,6 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) /* Write the data to rtc_wkalrm. */ alrm->time.tm_mday = ds1685_rtc_bcd2bin(rtc, mday, RTC_MDAY_BCD_MASK, RTC_MDAY_BIN_MASK); - alrm->time.tm_mon = -1; - alrm->time.tm_year = -1; - alrm->time.tm_wday = -1; - alrm->time.tm_yday = -1; - alrm->time.tm_isdst = -1; alrm->enabled = !!(ctrlb & RTC_CTRL_B_AIE); alrm->pending = !!(ctrlc & RTC_CTRL_C_AF); @@ -445,6 +456,7 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) struct platform_device *pdev = to_platform_device(dev); struct ds1685_priv *rtc = platform_get_drvdata(pdev); u8 ctrlb, seconds, minutes, hours, mday; + int ret; /* Fetch the alarm info and convert to BCD. */ seconds = ds1685_rtc_bin2bcd(rtc, alrm->time.tm_sec, @@ -461,8 +473,9 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) RTC_MDAY_BCD_MASK); /* Check the month date for validity. */ - if (!(mday >= 1) && (mday <= 31)) - return -EDOM; + ret = ds1685_rtc_check_mday(rtc, mday); + if (ret) + return ret; /* * Check the three alarm bytes. diff --git a/drivers/rtc/rtc-ds2404.c b/drivers/rtc/rtc-ds2404.c index 16310fe79d76..9a1582ed7070 100644 --- a/drivers/rtc/rtc-ds2404.c +++ b/drivers/rtc/rtc-ds2404.c @@ -13,7 +13,7 @@ #include <linux/rtc.h> #include <linux/types.h> #include <linux/bcd.h> -#include <linux/rtc-ds2404.h> +#include <linux/platform_data/rtc-ds2404.h> #include <linux/delay.h> #include <linux/gpio.h> #include <linux/slab.h> diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c index 04fbd7fffd0d..b1f20d8c358f 100644 --- a/drivers/rtc/rtc-ds3232.c +++ b/drivers/rtc/rtc-ds3232.c @@ -197,12 +197,6 @@ static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) alarm->time.tm_hour = bcd2bin(buf[2] & 0x7F); alarm->time.tm_mday = bcd2bin(buf[3] & 0x7F); - alarm->time.tm_mon = -1; - alarm->time.tm_year = -1; - alarm->time.tm_wday = -1; - alarm->time.tm_yday = -1; - alarm->time.tm_isdst = -1; - alarm->enabled = !!(control & DS3232_REG_CR_A1IE); alarm->pending = !!(stat & DS3232_REG_SR_A1F); diff --git a/drivers/rtc/rtc-efi.c b/drivers/rtc/rtc-efi.c index 96d38609d803..0130afd7fe88 100644 --- a/drivers/rtc/rtc-efi.c +++ b/drivers/rtc/rtc-efi.c @@ -259,6 +259,12 @@ static const struct rtc_class_ops efi_rtc_ops = { static int __init efi_rtc_probe(struct platform_device *dev) { struct rtc_device *rtc; + efi_time_t eft; + efi_time_cap_t cap; + + /* First check if the RTC is usable */ + if (efi.get_time(&eft, &cap) != EFI_SUCCESS) + return -ENODEV; rtc = devm_rtc_device_register(&dev->dev, "rtc-efi", &efi_rtc_ops, THIS_MODULE); diff --git a/drivers/rtc/rtc-generic.c b/drivers/rtc/rtc-generic.c index d726c6aa96a8..1bf5d2347928 100644 --- a/drivers/rtc/rtc-generic.c +++ b/drivers/rtc/rtc-generic.c @@ -9,44 +9,10 @@ #include <linux/platform_device.h> #include <linux/rtc.h> -#if defined(CONFIG_M68K) || defined(CONFIG_PARISC) || \ - defined(CONFIG_PPC) || defined(CONFIG_SUPERH32) -#include <asm/rtc.h> - -static int generic_get_time(struct device *dev, struct rtc_time *tm) -{ - unsigned int ret = get_rtc_time(tm); - - if (ret & RTC_BATT_BAD) - return -EOPNOTSUPP; - - return rtc_valid_tm(tm); -} - -static int generic_set_time(struct device *dev, struct rtc_time *tm) -{ - if (set_rtc_time(tm) < 0) - return -EOPNOTSUPP; - - return 0; -} - -static const struct rtc_class_ops generic_rtc_ops = { - .read_time = generic_get_time, - .set_time = generic_set_time, -}; -#else -#define generic_rtc_ops *(struct rtc_class_ops*)NULL -#endif - static int __init generic_rtc_probe(struct platform_device *dev) { struct rtc_device *rtc; - const struct rtc_class_ops *ops; - - ops = dev_get_platdata(&dev->dev); - if (!ops) - ops = &generic_rtc_ops; + const struct rtc_class_ops *ops = dev_get_platdata(&dev->dev); rtc = devm_rtc_device_register(&dev->dev, "rtc-generic", ops, THIS_MODULE); diff --git a/drivers/rtc/rtc-hym8563.c b/drivers/rtc/rtc-hym8563.c index 207270376b55..e5ad527cb75e 100644 --- a/drivers/rtc/rtc-hym8563.c +++ b/drivers/rtc/rtc-hym8563.c @@ -198,7 +198,7 @@ static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) return ret; /* The alarm only has a minute accuracy */ - alm_tm->tm_sec = -1; + alm_tm->tm_sec = 0; alm_tm->tm_min = (buf[0] & HYM8563_ALM_BIT_DISABLE) ? -1 : @@ -213,9 +213,6 @@ static int hym8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) -1 : bcd2bin(buf[3] & HYM8563_WEEKDAY_MASK); - alm_tm->tm_mon = -1; - alm_tm->tm_year = -1; - ret = i2c_smbus_read_byte_data(client, HYM8563_CTL2); if (ret < 0) return ret; diff --git a/drivers/rtc/rtc-isl12057.c b/drivers/rtc/rtc-isl12057.c index 54328d4ac0d3..0e7f0f52bfe4 100644 --- a/drivers/rtc/rtc-isl12057.c +++ b/drivers/rtc/rtc-isl12057.c @@ -245,8 +245,7 @@ static int isl12057_rtc_update_alarm(struct device *dev, int enable) static int isl12057_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) { struct isl12057_rtc_data *data = dev_get_drvdata(dev); - struct rtc_time rtc_tm, *alarm_tm = &alarm->time; - unsigned long rtc_secs, alarm_secs; + struct rtc_time *alarm_tm = &alarm->time; u8 regs[ISL12057_A1_SEC_LEN]; unsigned int ir; int ret; @@ -264,36 +263,6 @@ static int isl12057_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) alarm_tm->tm_min = bcd2bin(regs[1] & 0x7f); alarm_tm->tm_hour = bcd2bin(regs[2] & 0x3f); alarm_tm->tm_mday = bcd2bin(regs[3] & 0x3f); - alarm_tm->tm_wday = -1; - - /* - * The alarm section does not store year/month. We use the ones in rtc - * section as a basis and increment month and then year if needed to get - * alarm after current time. - */ - ret = _isl12057_rtc_read_time(dev, &rtc_tm); - if (ret) - goto err_unlock; - - alarm_tm->tm_year = rtc_tm.tm_year; - alarm_tm->tm_mon = rtc_tm.tm_mon; - - ret = rtc_tm_to_time(&rtc_tm, &rtc_secs); - if (ret) - goto err_unlock; - - ret = rtc_tm_to_time(alarm_tm, &alarm_secs); - if (ret) - goto err_unlock; - - if (alarm_secs < rtc_secs) { - if (alarm_tm->tm_mon == 11) { - alarm_tm->tm_mon = 0; - alarm_tm->tm_year += 1; - } else { - alarm_tm->tm_mon += 1; - } - } ret = regmap_read(data->regmap, ISL12057_REG_INT, &ir); if (ret) { diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index d1bf93a87200..58698d21c2c3 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -244,7 +244,7 @@ static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled) retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags); if (retval < 0) { - dev_info(dev, "Unable to enable alarm IRQ %d\n", retval); + dev_err(dev, "Unable to enable alarm IRQ %d\n", retval); return retval; } return 0; @@ -320,10 +320,8 @@ static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) alrm->time.tm_sec = bcd2bin(alarmvals[4] & 0x7f); alrm->time.tm_min = bcd2bin(alarmvals[3] & 0x7f); alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f); - alrm->time.tm_wday = -1; alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f); alrm->time.tm_mon = bcd2bin(alarmvals[0] & 0x3f); - alrm->time.tm_year = -1; alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE); alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled; @@ -337,6 +335,30 @@ static struct rtc_class_ops m41t80_rtc_ops = { .proc = m41t80_rtc_proc, }; +#ifdef CONFIG_PM_SLEEP +static int m41t80_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (client->irq >= 0 && device_may_wakeup(dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int m41t80_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (client->irq >= 0 && device_may_wakeup(dev)) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume); + static ssize_t flags_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -831,10 +853,9 @@ static int m41t80_probe(struct i2c_client *client, return rc; } - rc = devm_add_action(&client->dev, m41t80_remove_sysfs_group, - &client->dev); + rc = devm_add_action_or_reset(&client->dev, m41t80_remove_sysfs_group, + &client->dev); if (rc) { - m41t80_remove_sysfs_group(&client->dev); dev_err(&client->dev, "Failed to add sysfs cleanup action: %d\n", rc); return rc; @@ -873,6 +894,7 @@ static int m41t80_remove(struct i2c_client *client) static struct i2c_driver m41t80_driver = { .driver = { .name = "rtc-m41t80", + .pm = &m41t80_pm, }, .probe = m41t80_probe, .remove = m41t80_remove, diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c index f72b91f2501f..0eeb5714c00f 100644 --- a/drivers/rtc/rtc-m48t86.c +++ b/drivers/rtc/rtc-m48t86.c @@ -16,7 +16,7 @@ #include <linux/module.h> #include <linux/rtc.h> #include <linux/platform_device.h> -#include <linux/m48t86.h> +#include <linux/platform_data/rtc-m48t86.h> #include <linux/bcd.h> #define M48T86_REG_SEC 0x00 diff --git a/drivers/rtc/rtc-max6916.c b/drivers/rtc/rtc-max6916.c new file mode 100644 index 000000000000..623ab27b2757 --- /dev/null +++ b/drivers/rtc/rtc-max6916.c @@ -0,0 +1,164 @@ +/* rtc-max6916.c + * + * Driver for MAXIM max6916 Low Current, SPI Compatible + * Real Time Clock + * + * Author : Venkat Prashanth B U <venkat.prashanth2498@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/rtc.h> +#include <linux/spi/spi.h> +#include <linux/bcd.h> + +/* Registers in max6916 rtc */ + +#define MAX6916_SECONDS_REG 0x01 +#define MAX6916_MINUTES_REG 0x02 +#define MAX6916_HOURS_REG 0x03 +#define MAX6916_DATE_REG 0x04 +#define MAX6916_MONTH_REG 0x05 +#define MAX6916_DAY_REG 0x06 +#define MAX6916_YEAR_REG 0x07 +#define MAX6916_CONTROL_REG 0x08 +#define MAX6916_STATUS_REG 0x0C +#define MAX6916_CLOCK_BURST 0x3F + +static int max6916_read_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + + *data = address | 0x80; + + return spi_write_then_read(spi, data, 1, data, 1); +} + +static int max6916_write_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[2]; + + buf[0] = address & 0x7F; + buf[1] = data; + + return spi_write_then_read(spi, buf, 2, NULL, 0); +} + +static int max6916_read_time(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + int err; + unsigned char buf[8]; + + buf[0] = MAX6916_CLOCK_BURST | 0x80; + + err = spi_write_then_read(spi, buf, 1, buf, 8); + + if (err) + return err; + + dt->tm_sec = bcd2bin(buf[0]); + dt->tm_min = bcd2bin(buf[1]); + dt->tm_hour = bcd2bin(buf[2] & 0x3F); + dt->tm_mday = bcd2bin(buf[3]); + dt->tm_mon = bcd2bin(buf[4]) - 1; + dt->tm_wday = bcd2bin(buf[5]) - 1; + dt->tm_year = bcd2bin(buf[6]) + 100; + + return rtc_valid_tm(dt); +} + +static int max6916_set_time(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned char buf[9]; + + if (dt->tm_year < 100 || dt->tm_year > 199) { + dev_err(&spi->dev, "Year must be between 2000 and 2099. It's %d.\n", + dt->tm_year + 1900); + return -EINVAL; + } + + buf[0] = MAX6916_CLOCK_BURST & 0x7F; + buf[1] = bin2bcd(dt->tm_sec); + buf[2] = bin2bcd(dt->tm_min); + buf[3] = (bin2bcd(dt->tm_hour) & 0X3F); + buf[4] = bin2bcd(dt->tm_mday); + buf[5] = bin2bcd(dt->tm_mon + 1); + buf[6] = bin2bcd(dt->tm_wday + 1); + buf[7] = bin2bcd(dt->tm_year % 100); + buf[8] = bin2bcd(0x00); + + /* write the rtc settings */ + return spi_write_then_read(spi, buf, 9, NULL, 0); +} + +static const struct rtc_class_ops max6916_rtc_ops = { + .read_time = max6916_read_time, + .set_time = max6916_set_time, +}; + +static int max6916_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char data; + int res; + + /* spi setup with max6916 in mode 3 and bits per word as 8 */ + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + /* RTC Settings */ + res = max6916_read_reg(&spi->dev, MAX6916_SECONDS_REG, &data); + if (res) + return res; + + /* Disable the write protect of rtc */ + max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data); + data = data & ~(1 << 7); + max6916_write_reg(&spi->dev, MAX6916_CONTROL_REG, data); + + /*Enable oscillator,disable oscillator stop flag, glitch filter*/ + max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data); + data = data & 0x1B; + max6916_write_reg(&spi->dev, MAX6916_STATUS_REG, data); + + /* display the settings */ + max6916_read_reg(&spi->dev, MAX6916_CONTROL_REG, &data); + dev_info(&spi->dev, "MAX6916 RTC CTRL Reg = 0x%02x\n", data); + + max6916_read_reg(&spi->dev, MAX6916_STATUS_REG, &data); + dev_info(&spi->dev, "MAX6916 RTC Status Reg = 0x%02x\n", data); + + rtc = devm_rtc_device_register(&spi->dev, "max6916", + &max6916_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + spi_set_drvdata(spi, rtc); + + return 0; +} + +static struct spi_driver max6916_driver = { + .driver = { + .name = "max6916", + }, + .probe = max6916_probe, +}; +module_spi_driver(max6916_driver); + +MODULE_DESCRIPTION("MAX6916 SPI RTC DRIVER"); +MODULE_AUTHOR("Venkat Prashanth B U <venkat.prashanth2498@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/rtc/rtc-mc146818-lib.c b/drivers/rtc/rtc-mc146818-lib.c new file mode 100644 index 000000000000..2f1772a358ca --- /dev/null +++ b/drivers/rtc/rtc-mc146818-lib.c @@ -0,0 +1,198 @@ +#include <linux/bcd.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/mc146818rtc.h> + +#ifdef CONFIG_ACPI +#include <linux/acpi.h> +#endif + +/* + * Returns true if a clock update is in progress + */ +static inline unsigned char mc146818_is_updating(void) +{ + unsigned char uip; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + uip = (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP); + spin_unlock_irqrestore(&rtc_lock, flags); + return uip; +} + +unsigned int mc146818_get_time(struct rtc_time *time) +{ + unsigned char ctrl; + unsigned long flags; + unsigned char century = 0; + +#ifdef CONFIG_MACH_DECSTATION + unsigned int real_year; +#endif + + /* + * read RTC once any update in progress is done. The update + * can take just over 2ms. We wait 20ms. There is no need to + * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP. + * If you need to know *exactly* when a second has started, enable + * periodic update complete interrupts, (via ioctl) and then + * immediately read /dev/rtc which will block until you get the IRQ. + * Once the read clears, read the RTC time (again via ioctl). Easy. + */ + if (mc146818_is_updating()) + mdelay(20); + + /* + * Only the values that we read from the RTC are set. We leave + * tm_wday, tm_yday and tm_isdst untouched. Even though the + * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated + * by the RTC when initially set to a non-zero value. + */ + spin_lock_irqsave(&rtc_lock, flags); + time->tm_sec = CMOS_READ(RTC_SECONDS); + time->tm_min = CMOS_READ(RTC_MINUTES); + time->tm_hour = CMOS_READ(RTC_HOURS); + time->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH); + time->tm_mon = CMOS_READ(RTC_MONTH); + time->tm_year = CMOS_READ(RTC_YEAR); +#ifdef CONFIG_MACH_DECSTATION + real_year = CMOS_READ(RTC_DEC_YEAR); +#endif +#ifdef CONFIG_ACPI + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && + acpi_gbl_FADT.century) + century = CMOS_READ(acpi_gbl_FADT.century); +#endif + ctrl = CMOS_READ(RTC_CONTROL); + spin_unlock_irqrestore(&rtc_lock, flags); + + if (!(ctrl & RTC_DM_BINARY) || RTC_ALWAYS_BCD) + { + time->tm_sec = bcd2bin(time->tm_sec); + time->tm_min = bcd2bin(time->tm_min); + time->tm_hour = bcd2bin(time->tm_hour); + time->tm_mday = bcd2bin(time->tm_mday); + time->tm_mon = bcd2bin(time->tm_mon); + time->tm_year = bcd2bin(time->tm_year); + century = bcd2bin(century); + } + +#ifdef CONFIG_MACH_DECSTATION + time->tm_year += real_year - 72; +#endif + + if (century) + time->tm_year += (century - 19) * 100; + + /* + * Account for differences between how the RTC uses the values + * and how they are defined in a struct rtc_time; + */ + if (time->tm_year <= 69) + time->tm_year += 100; + + time->tm_mon--; + + return RTC_24H; +} +EXPORT_SYMBOL_GPL(mc146818_get_time); + +/* Set the current date and time in the real time clock. */ +int mc146818_set_time(struct rtc_time *time) +{ + unsigned long flags; + unsigned char mon, day, hrs, min, sec; + unsigned char save_control, save_freq_select; + unsigned int yrs; +#ifdef CONFIG_MACH_DECSTATION + unsigned int real_yrs, leap_yr; +#endif + unsigned char century = 0; + + yrs = time->tm_year; + mon = time->tm_mon + 1; /* tm_mon starts at zero */ + day = time->tm_mday; + hrs = time->tm_hour; + min = time->tm_min; + sec = time->tm_sec; + + if (yrs > 255) /* They are unsigned */ + return -EINVAL; + + spin_lock_irqsave(&rtc_lock, flags); +#ifdef CONFIG_MACH_DECSTATION + real_yrs = yrs; + leap_yr = ((!((yrs + 1900) % 4) && ((yrs + 1900) % 100)) || + !((yrs + 1900) % 400)); + yrs = 72; + + /* + * We want to keep the year set to 73 until March + * for non-leap years, so that Feb, 29th is handled + * correctly. + */ + if (!leap_yr && mon < 3) { + real_yrs--; + yrs = 73; + } +#endif + +#ifdef CONFIG_ACPI + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && + acpi_gbl_FADT.century) { + century = (yrs + 1900) / 100; + yrs %= 100; + } +#endif + + /* These limits and adjustments are independent of + * whether the chip is in binary mode or not. + */ + if (yrs > 169) { + spin_unlock_irqrestore(&rtc_lock, flags); + return -EINVAL; + } + + if (yrs >= 100) + yrs -= 100; + + if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) + || RTC_ALWAYS_BCD) { + sec = bin2bcd(sec); + min = bin2bcd(min); + hrs = bin2bcd(hrs); + day = bin2bcd(day); + mon = bin2bcd(mon); + yrs = bin2bcd(yrs); + century = bin2bcd(century); + } + + save_control = CMOS_READ(RTC_CONTROL); + CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + +#ifdef CONFIG_MACH_DECSTATION + CMOS_WRITE(real_yrs, RTC_DEC_YEAR); +#endif + CMOS_WRITE(yrs, RTC_YEAR); + CMOS_WRITE(mon, RTC_MONTH); + CMOS_WRITE(day, RTC_DAY_OF_MONTH); + CMOS_WRITE(hrs, RTC_HOURS); + CMOS_WRITE(min, RTC_MINUTES); + CMOS_WRITE(sec, RTC_SECONDS); +#ifdef CONFIG_ACPI + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID && + acpi_gbl_FADT.century) + CMOS_WRITE(century, acpi_gbl_FADT.century); +#endif + + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + + spin_unlock_irqrestore(&rtc_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(mc146818_set_time); diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c index 0094d9bdd1e6..7334c44fa7c3 100644 --- a/drivers/rtc/rtc-mrst.c +++ b/drivers/rtc/rtc-mrst.c @@ -32,11 +32,11 @@ #include <linux/interrupt.h> #include <linux/spinlock.h> #include <linux/kernel.h> +#include <linux/mc146818rtc.h> #include <linux/module.h> #include <linux/init.h> #include <linux/sfi.h> -#include <asm-generic/rtc.h> #include <asm/intel_scu_ipc.h> #include <asm/intel-mid.h> #include <asm/intel_mid_vrtc.h> @@ -149,14 +149,6 @@ static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t) if (mrst->irq <= 0) return -EIO; - /* Basic alarms only support hour, minute, and seconds fields. - * Some also support day and month, for alarms up to a year in - * the future. - */ - t->time.tm_mday = -1; - t->time.tm_mon = -1; - t->time.tm_year = -1; - /* vRTC only supports binary mode */ spin_lock_irq(&rtc_lock); t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM); diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c index f22e060709e5..b4478cc92b55 100644 --- a/drivers/rtc/rtc-pcf2123.c +++ b/drivers/rtc/rtc-pcf2123.c @@ -96,7 +96,7 @@ #define CD_TMR_TE BIT(3) /* Countdown timer enable */ /* PCF2123_REG_OFFSET BITS */ -#define OFFSET_SIGN_BIT BIT(6) /* 2's complement sign bit */ +#define OFFSET_SIGN_BIT 6 /* 2's complement sign bit */ #define OFFSET_COARSE BIT(7) /* Coarse mode offset */ #define OFFSET_STEP (2170) /* Offset step in parts per billion */ @@ -217,7 +217,7 @@ static int pcf2123_read_offset(struct device *dev, long *offset) if (reg & OFFSET_COARSE) reg <<= 1; /* multiply by 2 and sign extend */ else - reg |= (reg & OFFSET_SIGN_BIT) << 1; /* sign extend only */ + reg = sign_extend32(reg, OFFSET_SIGN_BIT); *offset = ((long)reg) * OFFSET_STEP; diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c index e8ddbb359d11..efb0a08ac117 100644 --- a/drivers/rtc/rtc-pcf85063.c +++ b/drivers/rtc/rtc-pcf85063.c @@ -16,6 +16,16 @@ #include <linux/rtc.h> #include <linux/module.h> +/* + * Information for this driver was pulled from the following datasheets. + * + * http://www.nxp.com/documents/data_sheet/PCF85063A.pdf + * http://www.nxp.com/documents/data_sheet/PCF85063TP.pdf + * + * PCF85063A -- Rev. 6 — 18 November 2015 + * PCF85063TP -- Rev. 4 — 6 May 2015 +*/ + #define PCF85063_REG_CTRL1 0x00 /* status */ #define PCF85063_REG_CTRL1_STOP BIT(5) #define PCF85063_REG_CTRL2 0x01 @@ -55,10 +65,22 @@ static int pcf85063_stop_clock(struct i2c_client *client, u8 *ctrl1) return 0; } -/* - * In the routines that deal directly with the pcf85063 hardware, we use - * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. - */ +static int pcf85063_start_clock(struct i2c_client *client, u8 ctrl1) +{ + s32 ret; + + /* start the clock */ + ctrl1 &= PCF85063_REG_CTRL1_STOP; + + ret = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, ctrl1); + if (ret < 0) { + dev_err(&client->dev, "Failing to start the clock\n"); + return -EIO; + } + + return 0; +} + static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm) { int rc; @@ -90,8 +112,7 @@ static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm) tm->tm_wday = regs[4] & 0x07; tm->tm_mon = bcd2bin(regs[5] & 0x1F) - 1; /* rtc mn 1-12 */ tm->tm_year = bcd2bin(regs[6]); - if (tm->tm_year < 70) - tm->tm_year += 100; /* assume we are in 1970...2069 */ + tm->tm_year += 100; return rtc_valid_tm(tm); } @@ -99,13 +120,17 @@ static int pcf85063_get_datetime(struct i2c_client *client, struct rtc_time *tm) static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm) { int rc; - u8 regs[8]; + u8 regs[7]; + u8 ctrl1; + + if ((tm->tm_year < 100) || (tm->tm_year > 199)) + return -EINVAL; /* * to accurately set the time, reset the divider chain and keep it in * reset state until all time/date registers are written */ - rc = pcf85063_stop_clock(client, ®s[7]); + rc = pcf85063_stop_clock(client, &ctrl1); if (rc != 0) return rc; @@ -125,14 +150,7 @@ static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm) regs[5] = bin2bcd(tm->tm_mon + 1); /* year and century */ - regs[6] = bin2bcd(tm->tm_year % 100); - - /* - * after all time/date registers are written, let the 'address auto - * increment' feature wrap around and write register CTRL1 to re-enable - * the clock divider chain again - */ - regs[7] &= ~PCF85063_REG_CTRL1_STOP; + regs[6] = bin2bcd(tm->tm_year - 100); /* write all registers at once */ rc = i2c_smbus_write_i2c_block_data(client, PCF85063_REG_SC, @@ -142,6 +160,15 @@ static int pcf85063_set_datetime(struct i2c_client *client, struct rtc_time *tm) return rc; } + /* + * Write the control register as a separate action since the size of + * the register space is different between the PCF85063TP and + * PCF85063A devices. The rollover point can not be used. + */ + rc = pcf85063_start_clock(client, ctrl1); + if (rc != 0) + return rc; + return 0; } diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index b9ddbb001283..1227ceab61ee 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -341,14 +341,11 @@ static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm) "%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n", __func__, buf[0], buf[1], buf[2], buf[3]); + tm->time.tm_sec = 0; tm->time.tm_min = bcd2bin(buf[0] & 0x7F); tm->time.tm_hour = bcd2bin(buf[1] & 0x3F); tm->time.tm_mday = bcd2bin(buf[2] & 0x3F); tm->time.tm_wday = bcd2bin(buf[3] & 0x7); - tm->time.tm_mon = -1; - tm->time.tm_year = -1; - tm->time.tm_yday = -1; - tm->time.tm_isdst = -1; err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending); if (err < 0) diff --git a/drivers/rtc/rtc-rc5t583.c b/drivers/rtc/rtc-rc5t583.c index f28d57788951..68ce77414bdc 100644 --- a/drivers/rtc/rtc-rc5t583.c +++ b/drivers/rtc/rtc-rc5t583.c @@ -128,6 +128,7 @@ static int rc5t583_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) return ret; } + alm->time.tm_sec = 0; alm->time.tm_min = bcd2bin(alarm_data[0]); alm->time.tm_hour = bcd2bin(alarm_data[1]); alm->time.tm_mday = bcd2bin(alarm_data[2]); diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c index ef86229428fc..c8c757466783 100644 --- a/drivers/rtc/rtc-rs5c372.c +++ b/drivers/rtc/rtc-rs5c372.c @@ -341,12 +341,6 @@ static int rs5c_read_alarm(struct device *dev, struct rtc_wkalrm *t) t->time.tm_sec = 0; t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f); t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]); - t->time.tm_mday = -1; - t->time.tm_mon = -1; - t->time.tm_year = -1; - t->time.tm_wday = -1; - t->time.tm_yday = -1; - t->time.tm_isdst = -1; /* ... and status */ t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE); diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c index f623038e586e..9a2f6a95d5a7 100644 --- a/drivers/rtc/rtc-rv8803.c +++ b/drivers/rtc/rtc-rv8803.c @@ -13,12 +13,15 @@ #include <linux/bcd.h> #include <linux/bitops.h> +#include <linux/log2.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/rtc.h> +#define RV8803_I2C_TRY_COUNT 4 + #define RV8803_SEC 0x00 #define RV8803_MIN 0x01 #define RV8803_HOUR 0x02 @@ -56,19 +59,85 @@ struct rv8803_data { u8 ctrl; }; +static int rv8803_read_reg(const struct i2c_client *client, u8 reg) +{ + int try = RV8803_I2C_TRY_COUNT; + s32 ret; + + /* + * There is a 61µs window during which the RTC does not acknowledge I2C + * transfers. In that case, ensure that there are multiple attempts. + */ + do + ret = i2c_smbus_read_byte_data(client, reg); + while ((ret == -ENXIO || ret == -EIO) && --try); + if (ret < 0) + dev_err(&client->dev, "Unable to read register 0x%02x\n", reg); + + return ret; +} + +static int rv8803_read_regs(const struct i2c_client *client, + u8 reg, u8 count, u8 *values) +{ + int try = RV8803_I2C_TRY_COUNT; + s32 ret; + + do + ret = i2c_smbus_read_i2c_block_data(client, reg, count, values); + while ((ret == -ENXIO || ret == -EIO) && --try); + if (ret != count) { + dev_err(&client->dev, + "Unable to read registers 0x%02x..0x%02x\n", + reg, reg + count - 1); + return ret < 0 ? ret : -EIO; + } + + return 0; +} + +static int rv8803_write_reg(const struct i2c_client *client, u8 reg, u8 value) +{ + int try = RV8803_I2C_TRY_COUNT; + s32 ret; + + do + ret = i2c_smbus_write_byte_data(client, reg, value); + while ((ret == -ENXIO || ret == -EIO) && --try); + if (ret) + dev_err(&client->dev, "Unable to write register 0x%02x\n", reg); + + return ret; +} + +static int rv8803_write_regs(const struct i2c_client *client, + u8 reg, u8 count, const u8 *values) +{ + int try = RV8803_I2C_TRY_COUNT; + s32 ret; + + do + ret = i2c_smbus_write_i2c_block_data(client, reg, count, + values); + while ((ret == -ENXIO || ret == -EIO) && --try); + if (ret) + dev_err(&client->dev, + "Unable to write registers 0x%02x..0x%02x\n", + reg, reg + count - 1); + + return ret; +} + static irqreturn_t rv8803_handle_irq(int irq, void *dev_id) { struct i2c_client *client = dev_id; struct rv8803_data *rv8803 = i2c_get_clientdata(client); unsigned long events = 0; - int flags, try = 0; + int flags; mutex_lock(&rv8803->flags_lock); - do { - flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); - try++; - } while ((flags == -ENXIO) && (try < 3)); + flags = rv8803_read_reg(client, RV8803_FLAG); if (flags <= 0) { mutex_unlock(&rv8803->flags_lock); return IRQ_NONE; @@ -100,9 +169,8 @@ static irqreturn_t rv8803_handle_irq(int irq, void *dev_id) if (events) { rtc_update_irq(rv8803->rtc, 1, events); - i2c_smbus_write_byte_data(client, RV8803_FLAG, flags); - i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL, - rv8803->ctrl); + rv8803_write_reg(client, RV8803_FLAG, flags); + rv8803_write_reg(rv8803->client, RV8803_CTRL, rv8803->ctrl); } mutex_unlock(&rv8803->flags_lock); @@ -118,7 +186,7 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm) u8 *date = date1; int ret, flags; - flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG); + flags = rv8803_read_reg(rv8803->client, RV8803_FLAG); if (flags < 0) return flags; @@ -127,16 +195,14 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm) return -EINVAL; } - ret = i2c_smbus_read_i2c_block_data(rv8803->client, RV8803_SEC, - 7, date); - if (ret != 7) - return ret < 0 ? ret : -EIO; + ret = rv8803_read_regs(rv8803->client, RV8803_SEC, 7, date); + if (ret) + return ret; if ((date1[RV8803_SEC] & 0x7f) == bin2bcd(59)) { - ret = i2c_smbus_read_i2c_block_data(rv8803->client, RV8803_SEC, - 7, date2); - if (ret != 7) - return ret < 0 ? ret : -EIO; + ret = rv8803_read_regs(rv8803->client, RV8803_SEC, 7, date2); + if (ret) + return ret; if ((date2[RV8803_SEC] & 0x7f) != bin2bcd(59)) date = date2; @@ -145,23 +211,33 @@ static int rv8803_get_time(struct device *dev, struct rtc_time *tm) tm->tm_sec = bcd2bin(date[RV8803_SEC] & 0x7f); tm->tm_min = bcd2bin(date[RV8803_MIN] & 0x7f); tm->tm_hour = bcd2bin(date[RV8803_HOUR] & 0x3f); - tm->tm_wday = ffs(date[RV8803_WEEK] & 0x7f); + tm->tm_wday = ilog2(date[RV8803_WEEK] & 0x7f); tm->tm_mday = bcd2bin(date[RV8803_DAY] & 0x3f); tm->tm_mon = bcd2bin(date[RV8803_MONTH] & 0x1f) - 1; tm->tm_year = bcd2bin(date[RV8803_YEAR]) + 100; - return rtc_valid_tm(tm); + return 0; } static int rv8803_set_time(struct device *dev, struct rtc_time *tm) { struct rv8803_data *rv8803 = dev_get_drvdata(dev); u8 date[7]; - int flags, ret; + int ctrl, flags, ret; if ((tm->tm_year < 100) || (tm->tm_year > 199)) return -EINVAL; + ctrl = rv8803_read_reg(rv8803->client, RV8803_CTRL); + if (ctrl < 0) + return ctrl; + + /* Stop the clock */ + ret = rv8803_write_reg(rv8803->client, RV8803_CTRL, + ctrl | RV8803_CTRL_RESET); + if (ret) + return ret; + date[RV8803_SEC] = bin2bcd(tm->tm_sec); date[RV8803_MIN] = bin2bcd(tm->tm_min); date[RV8803_HOUR] = bin2bcd(tm->tm_hour); @@ -170,21 +246,26 @@ static int rv8803_set_time(struct device *dev, struct rtc_time *tm) date[RV8803_MONTH] = bin2bcd(tm->tm_mon + 1); date[RV8803_YEAR] = bin2bcd(tm->tm_year - 100); - ret = i2c_smbus_write_i2c_block_data(rv8803->client, RV8803_SEC, - 7, date); - if (ret < 0) + ret = rv8803_write_regs(rv8803->client, RV8803_SEC, 7, date); + if (ret) + return ret; + + /* Restart the clock */ + ret = rv8803_write_reg(rv8803->client, RV8803_CTRL, + ctrl & ~RV8803_CTRL_RESET); + if (ret) return ret; mutex_lock(&rv8803->flags_lock); - flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG); + flags = rv8803_read_reg(rv8803->client, RV8803_FLAG); if (flags < 0) { mutex_unlock(&rv8803->flags_lock); return flags; } - ret = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG, - flags & ~RV8803_FLAG_V2F); + ret = rv8803_write_reg(rv8803->client, RV8803_FLAG, + flags & ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F)); mutex_unlock(&rv8803->flags_lock); @@ -198,22 +279,18 @@ static int rv8803_get_alarm(struct device *dev, struct rtc_wkalrm *alrm) u8 alarmvals[3]; int flags, ret; - ret = i2c_smbus_read_i2c_block_data(client, RV8803_ALARM_MIN, - 3, alarmvals); - if (ret != 3) - return ret < 0 ? ret : -EIO; + ret = rv8803_read_regs(client, RV8803_ALARM_MIN, 3, alarmvals); + if (ret) + return ret; - flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); + flags = rv8803_read_reg(client, RV8803_FLAG); if (flags < 0) return flags; alrm->time.tm_sec = 0; alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f); alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f); - alrm->time.tm_wday = -1; alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f); - alrm->time.tm_mon = -1; - alrm->time.tm_year = -1; alrm->enabled = !!(rv8803->ctrl & RV8803_CTRL_AIE); alrm->pending = (flags & RV8803_FLAG_AF) && alrm->enabled; @@ -239,10 +316,10 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) mutex_lock(&rv8803->flags_lock); - ret = i2c_smbus_read_i2c_block_data(client, RV8803_FLAG, 2, ctrl); - if (ret != 2) { + ret = rv8803_read_regs(client, RV8803_FLAG, 2, ctrl); + if (ret) { mutex_unlock(&rv8803->flags_lock); - return ret < 0 ? ret : -EIO; + return ret; } alarmvals[0] = bin2bcd(alrm->time.tm_min); @@ -251,8 +328,8 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) if (rv8803->ctrl & (RV8803_CTRL_AIE | RV8803_CTRL_UIE)) { rv8803->ctrl &= ~(RV8803_CTRL_AIE | RV8803_CTRL_UIE); - err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL, - rv8803->ctrl); + err = rv8803_write_reg(rv8803->client, RV8803_CTRL, + rv8803->ctrl); if (err) { mutex_unlock(&rv8803->flags_lock); return err; @@ -260,13 +337,12 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) } ctrl[1] &= ~RV8803_FLAG_AF; - err = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG, ctrl[1]); + err = rv8803_write_reg(rv8803->client, RV8803_FLAG, ctrl[1]); mutex_unlock(&rv8803->flags_lock); if (err) return err; - err = i2c_smbus_write_i2c_block_data(rv8803->client, RV8803_ALARM_MIN, - 3, alarmvals); + err = rv8803_write_regs(rv8803->client, RV8803_ALARM_MIN, 3, alarmvals); if (err) return err; @@ -276,8 +352,8 @@ static int rv8803_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) if (rv8803->rtc->aie_timer.enabled) rv8803->ctrl |= RV8803_CTRL_AIE; - err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL, - rv8803->ctrl); + err = rv8803_write_reg(rv8803->client, RV8803_CTRL, + rv8803->ctrl); if (err) return err; } @@ -306,21 +382,20 @@ static int rv8803_alarm_irq_enable(struct device *dev, unsigned int enabled) } mutex_lock(&rv8803->flags_lock); - flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); + flags = rv8803_read_reg(client, RV8803_FLAG); if (flags < 0) { mutex_unlock(&rv8803->flags_lock); return flags; } flags &= ~(RV8803_FLAG_AF | RV8803_FLAG_UF); - err = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags); + err = rv8803_write_reg(client, RV8803_FLAG, flags); mutex_unlock(&rv8803->flags_lock); if (err) return err; if (ctrl != rv8803->ctrl) { rv8803->ctrl = ctrl; - err = i2c_smbus_write_byte_data(client, RV8803_CTRL, - rv8803->ctrl); + err = rv8803_write_reg(client, RV8803_CTRL, rv8803->ctrl); if (err) return err; } @@ -336,7 +411,7 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) switch (cmd) { case RTC_VL_READ: - flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); + flags = rv8803_read_reg(client, RV8803_FLAG); if (flags < 0) return flags; @@ -355,16 +430,16 @@ static int rv8803_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) case RTC_VL_CLR: mutex_lock(&rv8803->flags_lock); - flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); + flags = rv8803_read_reg(client, RV8803_FLAG); if (flags < 0) { mutex_unlock(&rv8803->flags_lock); return flags; } flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F); - ret = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags); + ret = rv8803_write_reg(client, RV8803_FLAG, flags); mutex_unlock(&rv8803->flags_lock); - if (ret < 0) + if (ret) return ret; return 0; @@ -382,8 +457,8 @@ static ssize_t rv8803_nvram_write(struct file *filp, struct kobject *kobj, struct i2c_client *client = to_i2c_client(dev); int ret; - ret = i2c_smbus_write_byte_data(client, RV8803_RAM, buf[0]); - if (ret < 0) + ret = rv8803_write_reg(client, RV8803_RAM, buf[0]); + if (ret) return ret; return 1; @@ -397,7 +472,7 @@ static ssize_t rv8803_nvram_read(struct file *filp, struct kobject *kobj, struct i2c_client *client = to_i2c_client(dev); int ret; - ret = i2c_smbus_read_byte_data(client, RV8803_RAM); + ret = rv8803_read_reg(client, RV8803_RAM); if (ret < 0) return ret; @@ -427,7 +502,7 @@ static int rv8803_probe(struct i2c_client *client, { struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct rv8803_data *rv8803; - int err, flags, try = 0; + int err, flags; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK)) { @@ -444,16 +519,7 @@ static int rv8803_probe(struct i2c_client *client, rv8803->client = client; i2c_set_clientdata(client, rv8803); - /* - * There is a 60µs window where the RTC may not reply on the i2c bus in - * that case, the transfer is not ACKed. In that case, ensure there are - * multiple attempts. - */ - do { - flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); - try++; - } while ((flags == -ENXIO) && (try < 3)); - + flags = rv8803_read_reg(client, RV8803_FLAG); if (flags < 0) return flags; @@ -488,12 +554,7 @@ static int rv8803_probe(struct i2c_client *client, return PTR_ERR(rv8803->rtc); } - try = 0; - do { - err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT, - RV8803_EXT_WADA); - try++; - } while ((err == -ENXIO) && (try < 3)); + err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA); if (err) return err; diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c index 772d221ec2d9..7163b91bb773 100644 --- a/drivers/rtc/rtc-rx8010.c +++ b/drivers/rtc/rtc-rx8010.c @@ -272,15 +272,9 @@ static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t) t->time.tm_min = bcd2bin(alarmvals[0] & 0x7f); t->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f); - if (alarmvals[2] & RX8010_ALARM_AE) - t->time.tm_mday = -1; - else + if (!(alarmvals[2] & RX8010_ALARM_AE)) t->time.tm_mday = bcd2bin(alarmvals[2] & 0x7f); - t->time.tm_wday = -1; - t->time.tm_mon = -1; - t->time.tm_year = -1; - t->enabled = !!(rx8010->ctrlreg & RX8010_CTRL_AIE); t->pending = (flagreg & RX8010_FLAG_AF) && t->enabled; diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index 9f105efbc546..2b85cc7a24e7 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c @@ -319,11 +319,6 @@ static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t) t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12 + (ald[1] & 0x20 ? 12 : 0); - t->time.tm_wday = -1; - t->time.tm_mday = -1; - t->time.tm_mon = -1; - t->time.tm_year = -1; - dev_dbg(dev, "%s: date: %ds %dm %dh %dmd %dm %dy\n", __func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour, diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c index f40afdd0e5f5..5dab4665ca3b 100644 --- a/drivers/rtc/rtc-s35390a.c +++ b/drivers/rtc/rtc-s35390a.c @@ -15,6 +15,7 @@ #include <linux/bitrev.h> #include <linux/bcd.h> #include <linux/slab.h> +#include <linux/delay.h> #define S35390A_CMD_STATUS1 0 #define S35390A_CMD_STATUS2 1 @@ -34,10 +35,14 @@ #define S35390A_ALRM_BYTE_HOURS 1 #define S35390A_ALRM_BYTE_MINS 2 +/* flags for STATUS1 */ #define S35390A_FLAG_POC 0x01 #define S35390A_FLAG_BLD 0x02 +#define S35390A_FLAG_INT2 0x04 #define S35390A_FLAG_24H 0x40 #define S35390A_FLAG_RESET 0x80 + +/* flag for STATUS2 */ #define S35390A_FLAG_TEST 0x01 #define S35390A_INT2_MODE_MASK 0xF0 @@ -94,19 +99,63 @@ static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len) return 0; } -static int s35390a_reset(struct s35390a *s35390a) +/* + * Returns <0 on error, 0 if rtc is setup fine and 1 if the chip was reset. + * To keep the information if an irq is pending, pass the value read from + * STATUS1 to the caller. + */ +static int s35390a_reset(struct s35390a *s35390a, char *status1) { - char buf[1]; - - if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0) - return -EIO; - - if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD))) + char buf; + int ret; + unsigned initcount = 0; + + ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, status1, 1); + if (ret < 0) + return ret; + + if (*status1 & S35390A_FLAG_POC) + /* + * Do not communicate for 0.5 seconds since the power-on + * detection circuit is in operation. + */ + msleep(500); + else if (!(*status1 & S35390A_FLAG_BLD)) + /* + * If both POC and BLD are unset everything is fine. + */ return 0; - buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H); - buf[0] &= 0xf0; - return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)); + /* + * At least one of POC and BLD are set, so reinitialise chip. Keeping + * this information in the hardware to know later that the time isn't + * valid is unfortunately not possible because POC and BLD are cleared + * on read. So the reset is best done now. + * + * The 24H bit is kept over reset, so set it already here. + */ +initialize: + *status1 = S35390A_FLAG_24H; + buf = S35390A_FLAG_RESET | S35390A_FLAG_24H; + ret = s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1); + + if (ret < 0) + return ret; + + ret = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &buf, 1); + if (ret < 0) + return ret; + + if (buf & (S35390A_FLAG_POC | S35390A_FLAG_BLD)) { + /* Try up to five times to reset the chip */ + if (initcount < 5) { + ++initcount; + goto initialize; + } else + return -EIO; + } + + return 1; } static int s35390a_disable_test_mode(struct s35390a *s35390a) @@ -217,12 +266,12 @@ static int s35390a_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alm) alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday, alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday); - /* disable interrupt */ + /* disable interrupt (which deasserts the irq line) */ err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts)); if (err < 0) return err; - /* clear pending interrupt, if any */ + /* clear pending interrupt (in STATUS1 only), if any */ err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &sts, sizeof(sts)); if (err < 0) return err; @@ -242,6 +291,8 @@ static int s35390a_set_alarm(struct i2c_client *client, struct rtc_wkalrm *alm) if (alm->time.tm_wday != -1) buf[S35390A_ALRM_BYTE_WDAY] = bin2bcd(alm->time.tm_wday) | 0x80; + else + buf[S35390A_ALRM_BYTE_WDAY] = 0; buf[S35390A_ALRM_BYTE_HOURS] = s35390a_hr2reg(s35390a, alm->time.tm_hour) | 0x80; @@ -269,23 +320,43 @@ static int s35390a_read_alarm(struct i2c_client *client, struct rtc_wkalrm *alm) if (err < 0) return err; - if (bitrev8(sts) != S35390A_INT2_MODE_ALARM) - return -EINVAL; + if ((bitrev8(sts) & S35390A_INT2_MODE_MASK) != S35390A_INT2_MODE_ALARM) { + /* + * When the alarm isn't enabled, the register to configure + * the alarm time isn't accessible. + */ + alm->enabled = 0; + return 0; + } else { + alm->enabled = 1; + } err = s35390a_get_reg(s35390a, S35390A_CMD_INT2_REG1, buf, sizeof(buf)); if (err < 0) return err; /* This chip returns the bits of each byte in reverse order */ - for (i = 0; i < 3; ++i) { + for (i = 0; i < 3; ++i) buf[i] = bitrev8(buf[i]); - buf[i] &= ~0x80; - } - alm->time.tm_wday = bcd2bin(buf[S35390A_ALRM_BYTE_WDAY]); - alm->time.tm_hour = s35390a_reg2hr(s35390a, - buf[S35390A_ALRM_BYTE_HOURS]); - alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS]); + /* + * B0 of the three matching registers is an enable flag. Iff it is set + * the configured value is used for matching. + */ + if (buf[S35390A_ALRM_BYTE_WDAY] & 0x80) + alm->time.tm_wday = + bcd2bin(buf[S35390A_ALRM_BYTE_WDAY] & ~0x80); + + if (buf[S35390A_ALRM_BYTE_HOURS] & 0x80) + alm->time.tm_hour = + s35390a_reg2hr(s35390a, + buf[S35390A_ALRM_BYTE_HOURS] & ~0x80); + + if (buf[S35390A_ALRM_BYTE_MINS] & 0x80) + alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS] & ~0x80); + + /* alarm triggers always at s=0 */ + alm->time.tm_sec = 0; dev_dbg(&client->dev, "%s: alm is mins=%d, hours=%d, wday=%d\n", __func__, alm->time.tm_min, alm->time.tm_hour, @@ -327,11 +398,11 @@ static struct i2c_driver s35390a_driver; static int s35390a_probe(struct i2c_client *client, const struct i2c_device_id *id) { - int err; + int err, err_reset; unsigned int i; struct s35390a *s35390a; struct rtc_time tm; - char buf[1]; + char buf, status1; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { err = -ENODEV; @@ -360,29 +431,35 @@ static int s35390a_probe(struct i2c_client *client, } } - err = s35390a_reset(s35390a); - if (err < 0) { + err_reset = s35390a_reset(s35390a, &status1); + if (err_reset < 0) { + err = err_reset; dev_err(&client->dev, "error resetting chip\n"); goto exit_dummy; } - err = s35390a_disable_test_mode(s35390a); - if (err < 0) { - dev_err(&client->dev, "error disabling test mode\n"); - goto exit_dummy; - } - - err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)); - if (err < 0) { - dev_err(&client->dev, "error checking 12/24 hour mode\n"); - goto exit_dummy; - } - if (buf[0] & S35390A_FLAG_24H) + if (status1 & S35390A_FLAG_24H) s35390a->twentyfourhour = 1; else s35390a->twentyfourhour = 0; - if (s35390a_get_datetime(client, &tm) < 0) + if (status1 & S35390A_FLAG_INT2) { + /* disable alarm (and maybe test mode) */ + buf = 0; + err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1); + if (err < 0) { + dev_err(&client->dev, "error disabling alarm"); + goto exit_dummy; + } + } else { + err = s35390a_disable_test_mode(s35390a); + if (err < 0) { + dev_err(&client->dev, "error disabling test mode\n"); + goto exit_dummy; + } + } + + if (err_reset > 0 || s35390a_get_datetime(client, &tm) < 0) dev_warn(&client->dev, "clock needs to be set\n"); device_set_wakeup_capable(&client->dev, 1); @@ -395,6 +472,10 @@ static int s35390a_probe(struct i2c_client *client, err = PTR_ERR(s35390a->rtc); goto exit_dummy; } + + if (status1 & S35390A_FLAG_INT2) + rtc_update_irq(s35390a->rtc, 1, RTC_AF); + return 0; exit_dummy: diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index d01ad7e8078e..d44fb34df8fe 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -149,12 +149,14 @@ static int s3c_rtc_setfreq(struct s3c_rtc *info, int freq) if (!is_power_of_2(freq)) return -EINVAL; + s3c_rtc_enable_clk(info); spin_lock_irq(&info->pie_lock); if (info->data->set_freq) info->data->set_freq(info, freq); spin_unlock_irq(&info->pie_lock); + s3c_rtc_disable_clk(info); return 0; } @@ -264,35 +266,23 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm) /* decode the alarm enable field */ if (alm_en & S3C2410_RTCALM_SECEN) alm_tm->tm_sec = bcd2bin(alm_tm->tm_sec); - else - alm_tm->tm_sec = -1; if (alm_en & S3C2410_RTCALM_MINEN) alm_tm->tm_min = bcd2bin(alm_tm->tm_min); - else - alm_tm->tm_min = -1; if (alm_en & S3C2410_RTCALM_HOUREN) alm_tm->tm_hour = bcd2bin(alm_tm->tm_hour); - else - alm_tm->tm_hour = -1; if (alm_en & S3C2410_RTCALM_DAYEN) alm_tm->tm_mday = bcd2bin(alm_tm->tm_mday); - else - alm_tm->tm_mday = -1; if (alm_en & S3C2410_RTCALM_MONEN) { alm_tm->tm_mon = bcd2bin(alm_tm->tm_mon); alm_tm->tm_mon -= 1; - } else { - alm_tm->tm_mon = -1; } if (alm_en & S3C2410_RTCALM_YEAREN) alm_tm->tm_year = bcd2bin(alm_tm->tm_year); - else - alm_tm->tm_year = -1; return 0; } @@ -577,8 +567,6 @@ static int s3c_rtc_probe(struct platform_device *pdev) s3c_rtc_setfreq(info, 1); - s3c_rtc_disable_clk(info); - return 0; err_nortc: diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index a45845a571e5..17b6235d67a5 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -481,7 +481,6 @@ static int sh_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) tm->tm_mon = sh_rtc_read_alarm_value(rtc, RMONAR); if (tm->tm_mon > 0) tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */ - tm->tm_year = 0xffff; wkalrm->enabled = (readb(rtc->regbase + RCR1) & RCR1_AIE) ? 1 : 0; @@ -500,52 +499,13 @@ static inline void sh_rtc_write_alarm_value(struct sh_rtc *rtc, writeb(bin2bcd(value) | AR_ENB, rtc->regbase + reg_off); } -static int sh_rtc_check_alarm(struct rtc_time *tm) -{ - /* - * The original rtc says anything > 0xc0 is "don't care" or "match - * all" - most users use 0xff but rtc-dev uses -1 for the same thing. - * The original rtc doesn't support years - some things use -1 and - * some 0xffff. We use -1 to make out tests easier. - */ - if (tm->tm_year == 0xffff) - tm->tm_year = -1; - if (tm->tm_mon >= 0xff) - tm->tm_mon = -1; - if (tm->tm_mday >= 0xff) - tm->tm_mday = -1; - if (tm->tm_wday >= 0xff) - tm->tm_wday = -1; - if (tm->tm_hour >= 0xff) - tm->tm_hour = -1; - if (tm->tm_min >= 0xff) - tm->tm_min = -1; - if (tm->tm_sec >= 0xff) - tm->tm_sec = -1; - - if (tm->tm_year > 9999 || - tm->tm_mon >= 12 || - tm->tm_mday == 0 || tm->tm_mday >= 32 || - tm->tm_wday >= 7 || - tm->tm_hour >= 24 || - tm->tm_min >= 60 || - tm->tm_sec >= 60) - return -EINVAL; - - return 0; -} - static int sh_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) { struct platform_device *pdev = to_platform_device(dev); struct sh_rtc *rtc = platform_get_drvdata(pdev); unsigned int rcr1; struct rtc_time *tm = &wkalrm->time; - int mon, err; - - err = sh_rtc_check_alarm(tm); - if (unlikely(err < 0)) - return err; + int mon; spin_lock_irq(&rtc->lock); diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c index 60232bd366ef..15ac597d54da 100644 --- a/drivers/rtc/rtc-tegra.c +++ b/drivers/rtc/rtc-tegra.c @@ -179,12 +179,6 @@ static int tegra_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) if (sec == 0) { /* alarm is disabled. */ alarm->enabled = 0; - alarm->time.tm_mon = -1; - alarm->time.tm_mday = -1; - alarm->time.tm_year = -1; - alarm->time.tm_hour = -1; - alarm->time.tm_min = -1; - alarm->time.tm_sec = -1; } else { /* alarm is enabled. */ alarm->enabled = 1; diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index 7a0436329d6c..1f3117b5a83c 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -25,7 +25,7 @@ #include <linux/rtc.h> #include <linux/types.h> #include <linux/bcd.h> -#include <linux/rtc-v3020.h> +#include <linux/platform_data/rtc-v3020.h> #include <linux/delay.h> #include <linux/gpio.h> #include <linux/slab.h> |