Merge tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB driver updates from Greg KH:
 "Here's the big USB (and PHY) driver patchset for 4.1-rc1.

  Everything here has been in linux-next, and the full details are below
  in the shortlog.  Nothing major, just the normal round of new
  drivers,api updates, and other changes, mostly in the USB gadget area,
  as usual"

* tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits)
  drivers/usb/core: devio.c: Removed an uneeded space before tab
  usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume
  usb: chipidea: debug: add low power mode check before print registers
  usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode
  usb: core: hub: use new USB_RESUME_TIMEOUT
  usb: isp1760: hcd: use new USB_RESUME_TIMEOUT
  usb: dwc2: hcd: use new USB_RESUME_TIMEOUT
  usb: host: sl811: use new USB_RESUME_TIMEOUT
  usb: host: r8a66597: use new USB_RESUME_TIMEOUT
  usb: host: oxu210hp: use new USB_RESUME_TIMEOUT
  usb: host: fusbh200: use new USB_RESUME_TIMEOUT
  usb: host: fotg210: use new USB_RESUME_TIMEOUT
  usb: host: isp116x: use new USB_RESUME_TIMEOUT
  usb: musb: use new USB_RESUME_TIMEOUT
  usb: host: uhci: use new USB_RESUME_TIMEOUT
  usb: host: ehci: use new USB_RESUME_TIMEOUT
  usb: host: xhci: use new USB_RESUME_TIMEOUT
  usb: define a generic USB_RESUME_TIMEOUT macro
  usb: musb: dsps: fix build on i386 when COMPILE_TEST is set
  ehci-hub: use USB_DT_HUB
  ...

134 files changed, 5415 insertions, 2803 deletions

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 2962de205ba7..a53bd5b52df9 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -35,6 +35,13 @@ config ARMADA375_USBCLUSTER_PHY
 	depends on OF
 	select GENERIC_PHY
 
+config PHY_DM816X_USB
+	tristate "TI dm816x USB PHY driver"
+	depends on ARCH_OMAP2PLUS
+	select GENERIC_PHY
+	help
+	  Enable this for dm816x USB to work.
+
 config PHY_EXYNOS_MIPI_VIDEO
 	tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
 	depends on HAS_IOMEM
@@ -174,6 +181,17 @@ config PHY_SUN4I_USB
 	  This driver controls the entire USB PHY block, both the USB OTG
 	  parts, as well as the 2 regular USB 2 host PHYs.
 
+config PHY_SUN9I_USB
+	tristate "Allwinner sun9i SoC USB PHY driver"
+	depends on ARCH_SUNXI && HAS_IOMEM && OF
+	depends on RESET_CONTROLLER
+	select GENERIC_PHY
+	help
+	  Enable this to support the transceiver that is part of Allwinner
+	  sun9i SoCs.
+
+	  This driver controls each individual USB 2 host PHY.
+
 config PHY_SAMSUNG_USB2
 	tristate "Samsung USB 2.0 PHY driver"
 	depends on HAS_IOMEM
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f080e1bb2a74..f12625178780 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
+obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
 obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_BCM_KONA_USB2_PHY)		+= phy-bcm-kona-usb2.o
 obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
@@ -20,6 +21,7 @@ obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
 obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
 obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
+obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
 obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
 phy-exynos-usb2-y			+= phy-samsung-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c
index 099eee8851e5..6f3e06d687de 100644
--- a/drivers/phy/phy-berlin-sata.c
+++ b/drivers/phy/phy-berlin-sata.c
@@ -218,7 +218,7 @@ static int phy_berlin_sata_probe(struct platform_device *pdev)
 	if (priv->nphys == 0)
 		return -ENODEV;
 
-	priv->phys = devm_kzalloc(dev, priv->nphys * sizeof(*priv->phys),
+	priv->phys = devm_kcalloc(dev, priv->nphys, sizeof(*priv->phys),
 				  GFP_KERNEL);
 	if (!priv->phys)
 		return -ENOMEM;
diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/phy-berlin-usb.c
index c8a8d53a6ece..c6fc95b53083 100644
--- a/drivers/phy/phy-berlin-usb.c
+++ b/drivers/phy/phy-berlin-usb.c
@@ -103,9 +103,6 @@
 #define MODE_TEST_EN		BIT(11)
 #define ANA_TEST_DC_CTRL(x)	((x) << 12)
 
-#define to_phy_berlin_usb_priv(p)	\
-	container_of((p), struct phy_berlin_usb_priv, phy)
-
 static const u32 phy_berlin_pll_dividers[] = {
 	/* Berlin 2 */
 	CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
@@ -115,14 +112,13 @@ static const u32 phy_berlin_pll_dividers[] = {
 
 struct phy_berlin_usb_priv {
 	void __iomem		*base;
-	struct phy		*phy;
 	struct reset_control	*rst_ctrl;
 	u32			pll_divider;
 };
 
 static int phy_berlin_usb_power_on(struct phy *phy)
 {
-	struct phy_berlin_usb_priv *priv = dev_get_drvdata(phy->dev.parent);
+	struct phy_berlin_usb_priv *priv = phy_get_drvdata(phy);
 
 	reset_control_reset(priv->rst_ctrl);
 
@@ -175,6 +171,7 @@ static int phy_berlin_usb_probe(struct platform_device *pdev)
 		of_match_device(phy_berlin_sata_of_match, &pdev->dev);
 	struct phy_berlin_usb_priv *priv;
 	struct resource *res;
+	struct phy *phy;
 	struct phy_provider *phy_provider;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -192,20 +189,18 @@ static int phy_berlin_usb_probe(struct platform_device *pdev)
 
 	priv->pll_divider = *((u32 *)match->data);
 
-	priv->phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops);
-	if (IS_ERR(priv->phy)) {
+	phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops);
+	if (IS_ERR(phy)) {
 		dev_err(&pdev->dev, "failed to create PHY\n");
-		return PTR_ERR(priv->phy);
+		return PTR_ERR(phy);
 	}
 
 	platform_set_drvdata(pdev, priv);
+	phy_set_drvdata(phy, priv);
 
 	phy_provider =
 		devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-	if (IS_ERR(phy_provider))
-		return PTR_ERR(phy_provider);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
 static struct platform_driver phy_berlin_usb_driver = {
diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/phy-dm816x-usb.c
new file mode 100644
index 000000000000..7b42555ddd51
--- /dev/null
+++ b/drivers/phy/phy-dm816x-usb.c
@@ -0,0 +1,290 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include <linux/phy/phy.h>
+#include <linux/of_platform.h>
+
+#include <linux/mfd/syscon.h>
+
+/*
+ * TRM has two sets of USB_CTRL registers.. The correct register bits
+ * are in TRM section 24.9.8.2 USB_CTRL Register. The TRM documents the
+ * phy as being SR70LX Synopsys USB 2.0 OTG nanoPHY. It also seems at
+ * least dm816x rev c ignores writes to USB_CTRL register, but the TI
+ * kernel is writing to those so it's possible that later revisions
+ * have worknig USB_CTRL register.
+ *
+ * Also note that At least USB_CTRL register seems to be dm816x specific
+ * according to the TRM. It's possible that USBPHY_CTRL is more generic,
+ * but that would have to be checked against the SR70LX documentation
+ * which does not seem to be publicly available.
+ *
+ * Finally, the phy on dm814x and am335x is different from dm816x.
+ */
+#define DM816X_USB_CTRL_PHYCLKSRC	BIT(8)	/* 1 = PLL ref clock */
+#define DM816X_USB_CTRL_PHYSLEEP1	BIT(1)	/* Enable the first phy */
+#define DM816X_USB_CTRL_PHYSLEEP0	BIT(0)	/* Enable the second phy */
+
+#define DM816X_USBPHY_CTRL_TXRISETUNE	1
+#define DM816X_USBPHY_CTRL_TXVREFTUNE	0xc
+#define DM816X_USBPHY_CTRL_TXPREEMTUNE	0x2
+
+struct dm816x_usb_phy {
+	struct regmap *syscon;
+	struct device *dev;
+	unsigned int instance;
+	struct clk *refclk;
+	struct usb_phy phy;
+	unsigned int usb_ctrl;		/* Shared between phy0 and phy1 */
+	unsigned int usbphy_ctrl;
+};
+
+static int dm816x_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	otg->host = host;
+	if (!host)
+		otg->state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int dm816x_usb_phy_set_peripheral(struct usb_otg *otg,
+					 struct usb_gadget *gadget)
+{
+	otg->gadget = gadget;
+	if (!gadget)
+		otg->state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int dm816x_usb_phy_init(struct phy *x)
+{
+	struct dm816x_usb_phy *phy = phy_get_drvdata(x);
+	unsigned int val;
+	int error;
+
+	if (clk_get_rate(phy->refclk) != 24000000)
+		dev_warn(phy->dev, "nonstandard phy refclk\n");
+
+	/* Set PLL ref clock and put phys to sleep */
+	error = regmap_update_bits(phy->syscon, phy->usb_ctrl,
+				   DM816X_USB_CTRL_PHYCLKSRC |
+				   DM816X_USB_CTRL_PHYSLEEP1 |
+				   DM816X_USB_CTRL_PHYSLEEP0,
+				   0);
+	regmap_read(phy->syscon, phy->usb_ctrl, &val);
+	if ((val & 3) != 0)
+		dev_info(phy->dev,
+			 "Working dm816x USB_CTRL! (0x%08x)\n",
+			 val);
+
+	/*
+	 * TI kernel sets these values for "symmetrical eye diagram and
+	 * better signal quality" so let's assume somebody checked the
+	 * values with a scope and set them here too.
+	 */
+	regmap_read(phy->syscon, phy->usbphy_ctrl, &val);
+	val |= DM816X_USBPHY_CTRL_TXRISETUNE |
+		DM816X_USBPHY_CTRL_TXVREFTUNE |
+		DM816X_USBPHY_CTRL_TXPREEMTUNE;
+	regmap_write(phy->syscon, phy->usbphy_ctrl, val);
+
+	return 0;
+}
+
+static struct phy_ops ops = {
+	.init		= dm816x_usb_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int dm816x_usb_phy_runtime_suspend(struct device *dev)
+{
+	struct dm816x_usb_phy *phy = dev_get_drvdata(dev);
+	unsigned int mask, val;
+	int error = 0;
+
+	mask = BIT(phy->instance);
+	val = ~BIT(phy->instance);
+	error = regmap_update_bits(phy->syscon, phy->usb_ctrl,
+				   mask, val);
+	if (error)
+		dev_err(phy->dev, "phy%i failed to power off\n",
+			phy->instance);
+	clk_disable(phy->refclk);
+
+	return 0;
+}
+
+static int dm816x_usb_phy_runtime_resume(struct device *dev)
+{
+	struct dm816x_usb_phy *phy = dev_get_drvdata(dev);
+	unsigned int mask, val;
+	int error;
+
+	error = clk_enable(phy->refclk);
+	if (error)
+		return error;
+
+	/*
+	 * Note that at least dm816x rev c does not seem to do
+	 * anything with the USB_CTRL register. But let's follow
+	 * what the TI tree is doing in case later revisions use
+	 * USB_CTRL.
+	 */
+	mask = BIT(phy->instance);
+	val = BIT(phy->instance);
+	error = regmap_update_bits(phy->syscon, phy->usb_ctrl,
+				   mask, val);
+	if (error) {
+		dev_err(phy->dev, "phy%i failed to power on\n",
+			phy->instance);
+		clk_disable(phy->refclk);
+		return error;
+	}
+
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(dm816x_usb_phy_pm_ops,
+			    dm816x_usb_phy_runtime_suspend,
+			    dm816x_usb_phy_runtime_resume,
+			    NULL);
+
+#ifdef CONFIG_OF
+static const struct of_device_id dm816x_usb_phy_id_table[] = {
+	{
+		.compatible = "ti,dm8168-usb-phy",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, dm816x_usb_phy_id_table);
+#endif
+
+static int dm816x_usb_phy_probe(struct platform_device *pdev)
+{
+	struct dm816x_usb_phy *phy;
+	struct resource *res;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct usb_otg *otg;
+	const struct of_device_id *of_id;
+	const struct usb_phy_data *phy_data;
+	int error;
+
+	of_id = of_match_device(of_match_ptr(dm816x_usb_phy_id_table),
+				&pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+
+	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	phy->syscon = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+						      "syscon");
+	if (IS_ERR(phy->syscon))
+		return PTR_ERR(phy->syscon);
+
+	/*
+	 * According to sprs614e.pdf, the first usb_ctrl is shared and
+	 * the second instance for usb_ctrl is reserved.. Also the
+	 * register bits are different from earlier TRMs.
+	 */
+	phy->usb_ctrl = 0x20;
+	phy->usbphy_ctrl = (res->start & 0xff) + 4;
+	if (phy->usbphy_ctrl == 0x2c)
+		phy->instance = 1;
+
+	phy_data = of_id->data;
+
+	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	phy->dev = &pdev->dev;
+	phy->phy.dev = phy->dev;
+	phy->phy.label = "dm8168_usb_phy";
+	phy->phy.otg = otg;
+	phy->phy.type = USB_PHY_TYPE_USB2;
+	otg->set_host = dm816x_usb_phy_set_host;
+	otg->set_peripheral = dm816x_usb_phy_set_peripheral;
+	otg->usb_phy = &phy->phy;
+
+	platform_set_drvdata(pdev, phy);
+
+	phy->refclk = devm_clk_get(phy->dev, "refclk");
+	if (IS_ERR(phy->refclk))
+		return PTR_ERR(phy->refclk);
+	error = clk_prepare(phy->refclk);
+	if (error)
+		return error;
+
+	pm_runtime_enable(phy->dev);
+	generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+	if (IS_ERR(generic_phy))
+		return PTR_ERR(generic_phy);
+
+	phy_set_drvdata(generic_phy, phy);
+
+	phy_provider = devm_of_phy_provider_register(phy->dev,
+						     of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	usb_add_phy_dev(&phy->phy);
+
+	return 0;
+}
+
+static int dm816x_usb_phy_remove(struct platform_device *pdev)
+{
+	struct dm816x_usb_phy *phy = platform_get_drvdata(pdev);
+
+	usb_remove_phy(&phy->phy);
+	pm_runtime_disable(phy->dev);
+	clk_unprepare(phy->refclk);
+
+	return 0;
+}
+
+static struct platform_driver dm816x_usb_phy_driver = {
+	.probe		= dm816x_usb_phy_probe,
+	.remove		= dm816x_usb_phy_remove,
+	.driver		= {
+		.name	= "dm816x-usb-phy",
+		.pm	= &dm816x_usb_phy_pm_ops,
+		.of_match_table = of_match_ptr(dm816x_usb_phy_id_table),
+	},
+};
+
+module_platform_driver(dm816x_usb_phy_driver);
+
+MODULE_ALIAS("platform:dm816x_usb");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("dm816x usb phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index e2a0be750ad9..d72ef15b0d68 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -624,6 +624,13 @@ static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = {
 	.has_common_clk_gate	= true,
 };
 
+static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = {
+	.phy_cfg		= phy_cfg_exynos5,
+	.pmu_offset_usbdrd0_phy	= EXYNOS5_USBDRD_PHY_CONTROL,
+	.pmu_offset_usbdrd1_phy	= EXYNOS5433_USBHOST30_PHY_CONTROL,
+	.has_common_clk_gate	= false,
+};
+
 static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = {
 	.phy_cfg		= phy_cfg_exynos5,
 	.pmu_offset_usbdrd0_phy	= EXYNOS5_USBDRD_PHY_CONTROL,
@@ -638,6 +645,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
 		.compatible = "samsung,exynos5420-usbdrd-phy",
 		.data = &exynos5420_usbdrd_phy
 	}, {
+		.compatible = "samsung,exynos5433-usbdrd-phy",
+		.data = &exynos5433_usbdrd_phy
+	}, {
 		.compatible = "samsung,exynos7-usbdrd-phy",
 		.data = &exynos7_usbdrd_phy
 	},
diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/phy-miphy28lp.c
index 933435214acc..c4cc11dcb2a2 100644
--- a/drivers/phy/phy-miphy28lp.c
+++ b/drivers/phy/phy-miphy28lp.c
@@ -1259,10 +1259,7 @@ static int miphy28lp_probe(struct platform_device *pdev)
 	}
 
 	provider = devm_of_phy_provider_register(&pdev->dev, miphy28lp_xlate);
-	if (IS_ERR(provider))
-		return PTR_ERR(provider);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(provider);
 }
 
 static const struct of_device_id miphy28lp_of_match[] = {
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
index 51b459db9137..019c2d75344e 100644
--- a/drivers/phy/phy-miphy365x.c
+++ b/drivers/phy/phy-miphy365x.c
@@ -25,7 +25,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
-#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/phy/phy.h>
 
 #define HFC_TIMEOUT		100
 
@@ -177,7 +177,7 @@ static u8 rx_tx_spd[] = {
 static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
 			      struct miphy365x_dev *miphy_dev)
 {
-	bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
+	bool sata = (miphy_phy->type == PHY_TYPE_SATA);
 
 	return regmap_update_bits(miphy_dev->regmap,
 				  miphy_phy->ctrlreg,
@@ -431,7 +431,7 @@ static int miphy365x_init(struct phy *phy)
 	}
 
 	/* Initialise Miphy for PCIe or SATA */
-	if (miphy_phy->type == MIPHY_TYPE_PCIE)
+	if (miphy_phy->type == PHY_TYPE_PCIE)
 		ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev);
 	else
 		ret = miphy365x_init_sata_port(miphy_phy, miphy_dev);
@@ -455,8 +455,8 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
 		return ret;
 	}
 
-	if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
-	      (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
+	if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) ||
+	      (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE)))
 		return 0;
 
 	miphy_phy->base = of_iomap(phynode, index);
@@ -499,8 +499,8 @@ static struct phy *miphy365x_xlate(struct device *dev,
 
 	miphy_phy->type = args->args[0];
 
-	if (!(miphy_phy->type == MIPHY_TYPE_SATA ||
-	      miphy_phy->type == MIPHY_TYPE_PCIE)) {
+	if (!(miphy_phy->type == PHY_TYPE_SATA ||
+	      miphy_phy->type == PHY_TYPE_PCIE)) {
 		dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type);
 		return ERR_PTR(-EINVAL);
 	}
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
index 93252e053a31..e9c41b3fa0ee 100644
--- a/drivers/phy/phy-omap-control.c
+++ b/drivers/phy/phy-omap-control.c
@@ -216,7 +216,6 @@ void omap_control_usb_set_mode(struct device *dev,
 		return;
 
 	ctrl_phy = dev_get_drvdata(dev);
-
 	if (!ctrl_phy) {
 		dev_err(dev, "Invalid control phy device\n");
 		return;
@@ -241,8 +240,6 @@ void omap_control_usb_set_mode(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
 
-#ifdef CONFIG_OF
-
 static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
 static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
 static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
@@ -278,8 +275,6 @@ static const struct of_device_id omap_control_phy_id_table[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
-#endif
-
 
 static int omap_control_phy_probe(struct platform_device *pdev)
 {
@@ -287,8 +282,7 @@ static int omap_control_phy_probe(struct platform_device *pdev)
 	const struct of_device_id *of_id;
 	struct omap_control_phy *control_phy;
 
-	of_id = of_match_device(of_match_ptr(omap_control_phy_id_table),
-				&pdev->dev);
+	of_id = of_match_device(omap_control_phy_id_table, &pdev->dev);
 	if (!of_id)
 		return -EINVAL;
 
@@ -344,7 +338,7 @@ static struct platform_driver omap_control_phy_driver = {
 	.probe		= omap_control_phy_probe,
 	.driver		= {
 		.name	= "omap-control-phy",
-		.of_match_table = of_match_ptr(omap_control_phy_id_table),
+		.of_match_table = omap_control_phy_id_table,
 	},
 };
 
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 4757e765696a..183ef4368101 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -144,7 +144,6 @@ static struct phy_ops ops = {
 	.owner		= THIS_MODULE,
 };
 
-#ifdef CONFIG_OF
 static const struct usb_phy_data omap_usb2_data = {
 	.label = "omap_usb2",
 	.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
@@ -185,7 +184,6 @@ static const struct of_device_id omap_usb2_id_table[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
-#endif
 
 static int omap_usb2_probe(struct platform_device *pdev)
 {
@@ -200,7 +198,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	const struct of_device_id *of_id;
 	struct usb_phy_data *phy_data;
 
-	of_id = of_match_device(of_match_ptr(omap_usb2_id_table), &pdev->dev);
+	of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
 
 	if (!of_id)
 		return -EINVAL;
@@ -378,7 +376,7 @@ static struct platform_driver omap_usb2_driver = {
 	.driver		= {
 		.name	= "omap-usb2",
 		.pm	= DEV_PM_OPS,
-		.of_match_table = of_match_ptr(omap_usb2_id_table),
+		.of_match_table = omap_usb2_id_table,
 	},
 };
 
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index 86665e9dc399..f9c618f0ab6e 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -73,6 +73,7 @@ int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate);
 
 struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
 				struct ufs_qcom_phy *common_cfg,
@@ -101,6 +102,7 @@ struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
 	if (IS_ERR(generic_phy)) {
 		err =  PTR_ERR(generic_phy);
 		dev_err(dev, "%s: failed to create phy %d\n", __func__, err);
+		generic_phy = NULL;
 		goto out;
 	}
 
@@ -110,6 +112,7 @@ struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
 out:
 	return generic_phy;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe);
 
 /*
  * This assumes the embedded phy structure inside generic_phy is of type
@@ -121,6 +124,7 @@ struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy)
 {
 	return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy);
 }
+EXPORT_SYMBOL_GPL(get_ufs_qcom_phy);
 
 static
 int ufs_qcom_phy_base_init(struct platform_device *pdev,
@@ -131,40 +135,23 @@ int ufs_qcom_phy_base_init(struct platform_device *pdev,
 	int err = 0;
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem");
-	if (!res) {
-		dev_err(dev, "%s: phy_mem resource not found\n", __func__);
-		err = -ENOMEM;
-		goto out;
-	}
-
 	phy_common->mmio = devm_ioremap_resource(dev, res);
 	if (IS_ERR((void const *)phy_common->mmio)) {
 		err = PTR_ERR((void const *)phy_common->mmio);
 		phy_common->mmio = NULL;
 		dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n",
 			__func__, err);
-		goto out;
+		return err;
 	}
 
 	/* "dev_ref_clk_ctrl_mem" is optional resource */
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "dev_ref_clk_ctrl_mem");
-	if (!res) {
-		dev_dbg(dev, "%s: dev_ref_clk_ctrl_mem resource not found\n",
-			__func__);
-		goto out;
-	}
-
 	phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res);
-	if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio)) {
-		err = PTR_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio);
+	if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio))
 		phy_common->dev_ref_clk_ctrl_mmio = NULL;
-		dev_err(dev, "%s: ioremap for dev_ref_clk_ctrl_mem resource failed %d\n",
-			__func__, err);
-	}
 
-out:
-	return err;
+	return 0;
 }
 
 static int __ufs_qcom_phy_clk_get(struct phy *phy,
@@ -228,6 +215,7 @@ ufs_qcom_phy_init_clks(struct phy *generic_phy,
 out:
 	return err;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks);
 
 int
 ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
@@ -252,6 +240,7 @@ ufs_qcom_phy_init_vregulators(struct phy *generic_phy,
 out:
 	return err;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators);
 
 static int __ufs_qcom_phy_init_vreg(struct phy *phy,
 		struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional)
@@ -647,6 +636,7 @@ int ufs_qcom_phy_remove(struct phy *generic_phy,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_remove);
 
 int ufs_qcom_phy_exit(struct phy *generic_phy)
 {
@@ -657,6 +647,7 @@ int ufs_qcom_phy_exit(struct phy *generic_phy)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_exit);
 
 int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
 {
@@ -725,6 +716,7 @@ out_disable_phy:
 out:
 	return err;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on);
 
 int ufs_qcom_phy_power_off(struct phy *generic_phy)
 {
@@ -743,3 +735,4 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off);
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c
index 4a12f66b7fb5..55b6994932e3 100644
--- a/drivers/phy/phy-samsung-usb2.c
+++ b/drivers/phy/phy-samsung-usb2.c
@@ -37,10 +37,14 @@ static int samsung_usb2_phy_power_on(struct phy *phy)
 		spin_lock(&drv->lock);
 		ret = inst->cfg->power_on(inst);
 		spin_unlock(&drv->lock);
+		if (ret)
+			goto err_power_on;
 	}
 
 	return 0;
 
+err_power_on:
+	clk_disable_unprepare(drv->ref_clk);
 err_instance_clk:
 	clk_disable_unprepare(drv->clk);
 err_main_clk:
@@ -51,7 +55,7 @@ static int samsung_usb2_phy_power_off(struct phy *phy)
 {
 	struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
 	struct samsung_usb2_phy_driver *drv = inst->drv;
-	int ret = 0;
+	int ret;
 
 	dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
 		inst->cfg->label);
@@ -59,10 +63,12 @@ static int samsung_usb2_phy_power_off(struct phy *phy)
 		spin_lock(&drv->lock);
 		ret = inst->cfg->power_off(inst);
 		spin_unlock(&drv->lock);
+		if (ret)
+			return ret;
 	}
 	clk_disable_unprepare(drv->ref_clk);
 	clk_disable_unprepare(drv->clk);
-	return ret;
+	return 0;
 }
 
 static struct phy_ops samsung_usb2_phy_ops = {
diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/phy-spear1310-miphy.c
index 9f47fae7eecb..65ae640cfbd1 100644
--- a/drivers/phy/phy-spear1310-miphy.c
+++ b/drivers/phy/phy-spear1310-miphy.c
@@ -192,14 +192,14 @@ static struct phy *spear1310_miphy_xlate(struct device *dev,
 
 	if (args->args_count < 1) {
 		dev_err(dev, "DT did not pass correct no of args\n");
-		return NULL;
+		return ERR_PTR(-ENODEV);
 	}
 
 	priv->mode = args->args[0];
 
 	if (priv->mode != SATA && priv->mode != PCIE) {
 		dev_err(dev, "DT did not pass correct phy mode\n");
-		return NULL;
+		return ERR_PTR(-ENODEV);
 	}
 
 	return priv->phy;
diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/phy-spear1340-miphy.c
index e42bc200275f..1a00c2817f34 100644
--- a/drivers/phy/phy-spear1340-miphy.c
+++ b/drivers/phy/phy-spear1340-miphy.c
@@ -229,14 +229,14 @@ static struct phy *spear1340_miphy_xlate(struct device *dev,
 
 	if (args->args_count < 1) {
 		dev_err(dev, "DT did not pass correct no of args\n");
-		return NULL;
+		return ERR_PTR(-ENODEV);
 	}
 
 	priv->mode = args->args[0];
 
 	if (priv->mode != SATA && priv->mode != PCIE) {
 		dev_err(dev, "DT did not pass correct phy mode\n");
-		return NULL;
+		return ERR_PTR(-ENODEV);
 	}
 
 	return priv->phy;
diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/phy-stih41x-usb.c
index a603801293ff..c093b472b57d 100644
--- a/drivers/phy/phy-stih41x-usb.c
+++ b/drivers/phy/phy-stih41x-usb.c
@@ -87,8 +87,12 @@ static int stih41x_usb_phy_power_on(struct phy *phy)
 		return ret;
 	}
 
-	return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
-			phy_dev->cfg->oscok, phy_dev->cfg->oscok);
+	ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
+				 phy_dev->cfg->oscok, phy_dev->cfg->oscok);
+	if (ret)
+		clk_disable_unprepare(phy_dev->clk);
+
+	return ret;
 }
 
 static int stih41x_usb_phy_power_off(struct phy *phy)
diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/phy-sun9i-usb.c
new file mode 100644
index 000000000000..0095914a662c
--- /dev/null
+++ b/drivers/phy/phy-sun9i-usb.c
@@ -0,0 +1,202 @@
+/*
+ * Allwinner sun9i USB phy driver
+ *
+ * Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on phy-sun4i-usb.c from
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * and code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#define SUNXI_AHB_INCR16_BURST_EN	BIT(11)
+#define SUNXI_AHB_INCR8_BURST_EN	BIT(10)
+#define SUNXI_AHB_INCR4_BURST_EN	BIT(9)
+#define SUNXI_AHB_INCRX_ALIGN_EN	BIT(8)
+#define SUNXI_ULPI_BYPASS_EN		BIT(0)
+
+/* usb1 HSIC specific bits */
+#define SUNXI_EHCI_HS_FORCE		BIT(20)
+#define SUNXI_HSIC_CONNECT_DET		BIT(17)
+#define SUNXI_HSIC_CONNECT_INT		BIT(16)
+#define SUNXI_HSIC			BIT(1)
+
+struct sun9i_usb_phy {
+	struct phy *phy;
+	void __iomem *pmu;
+	struct reset_control *reset;
+	struct clk *clk;
+	struct clk *hsic_clk;
+	enum usb_phy_interface type;
+};
+
+static void sun9i_usb_phy_passby(struct sun9i_usb_phy *phy, int enable)
+{
+	u32 bits, reg_value;
+
+	bits = SUNXI_AHB_INCR16_BURST_EN | SUNXI_AHB_INCR8_BURST_EN |
+		SUNXI_AHB_INCR4_BURST_EN | SUNXI_AHB_INCRX_ALIGN_EN |
+		SUNXI_ULPI_BYPASS_EN;
+
+	if (phy->type == USBPHY_INTERFACE_MODE_HSIC)
+		bits |= SUNXI_HSIC | SUNXI_EHCI_HS_FORCE |
+			SUNXI_HSIC_CONNECT_DET | SUNXI_HSIC_CONNECT_INT;
+
+	reg_value = readl(phy->pmu);
+
+	if (enable)
+		reg_value |= bits;
+	else
+		reg_value &= ~bits;
+
+	writel(reg_value, phy->pmu);
+}
+
+static int sun9i_usb_phy_init(struct phy *_phy)
+{
+	struct sun9i_usb_phy *phy = phy_get_drvdata(_phy);
+	int ret;
+
+	ret = clk_prepare_enable(phy->clk);
+	if (ret)
+		goto err_clk;
+
+	ret = clk_prepare_enable(phy->hsic_clk);
+	if (ret)
+		goto err_hsic_clk;
+
+	ret = reset_control_deassert(phy->reset);
+	if (ret)
+		goto err_reset;
+
+	sun9i_usb_phy_passby(phy, 1);
+	return 0;
+
+err_reset:
+	clk_disable_unprepare(phy->hsic_clk);
+
+err_hsic_clk:
+	clk_disable_unprepare(phy->clk);
+
+err_clk:
+	return ret;
+}
+
+static int sun9i_usb_phy_exit(struct phy *_phy)
+{
+	struct sun9i_usb_phy *phy = phy_get_drvdata(_phy);
+
+	sun9i_usb_phy_passby(phy, 0);
+	reset_control_assert(phy->reset);
+	clk_disable_unprepare(phy->hsic_clk);
+	clk_disable_unprepare(phy->clk);
+
+	return 0;
+}
+
+static struct phy_ops sun9i_usb_phy_ops = {
+	.init		= sun9i_usb_phy_init,
+	.exit		= sun9i_usb_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+static int sun9i_usb_phy_probe(struct platform_device *pdev)
+{
+	struct sun9i_usb_phy *phy;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	phy->type = of_usb_get_phy_mode(np);
+	if (phy->type == USBPHY_INTERFACE_MODE_HSIC) {
+		phy->clk = devm_clk_get(dev, "hsic_480M");
+		if (IS_ERR(phy->clk)) {
+			dev_err(dev, "failed to get hsic_480M clock\n");
+			return PTR_ERR(phy->clk);
+		}
+
+		phy->hsic_clk = devm_clk_get(dev, "hsic_12M");
+		if (IS_ERR(phy->clk)) {
+			dev_err(dev, "failed to get hsic_12M clock\n");
+			return PTR_ERR(phy->clk);
+		}
+
+		phy->reset = devm_reset_control_get(dev, "hsic");
+		if (IS_ERR(phy->reset)) {
+			dev_err(dev, "failed to get reset control\n");
+			return PTR_ERR(phy->reset);
+		}
+	} else {
+		phy->clk = devm_clk_get(dev, "phy");
+		if (IS_ERR(phy->clk)) {
+			dev_err(dev, "failed to get phy clock\n");
+			return PTR_ERR(phy->clk);
+		}
+
+		phy->reset = devm_reset_control_get(dev, "phy");
+		if (IS_ERR(phy->reset)) {
+			dev_err(dev, "failed to get reset control\n");
+			return PTR_ERR(phy->reset);
+		}
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	phy->pmu = devm_ioremap_resource(dev, res);
+	if (IS_ERR(phy->pmu))
+		return PTR_ERR(phy->pmu);
+
+	phy->phy = devm_phy_create(dev, NULL, &sun9i_usb_phy_ops);
+	if (IS_ERR(phy->phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(phy->phy);
+	}
+
+	phy_set_drvdata(phy->phy, phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id sun9i_usb_phy_of_match[] = {
+	{ .compatible = "allwinner,sun9i-a80-usb-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sun9i_usb_phy_of_match);
+
+static struct platform_driver sun9i_usb_phy_driver = {
+	.probe	= sun9i_usb_phy_probe,
+	.driver = {
+		.of_match_table	= sun9i_usb_phy_of_match,
+		.name  = "sun9i-usb-phy",
+	}
+};
+module_platform_driver(sun9i_usb_phy_driver);
+
+MODULE_DESCRIPTION("Allwinner sun9i USB phy driver");
+MODULE_AUTHOR("Chen-Yu Tsai <wens@csie.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index 2ba610b72ca2..53f295c1bab1 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -287,9 +287,7 @@ static struct phy_ops ops = {
 	.owner		= THIS_MODULE,
 };
 
-#ifdef CONFIG_OF
 static const struct of_device_id ti_pipe3_id_table[];
-#endif
 
 static int ti_pipe3_probe(struct platform_device *pdev)
 {
@@ -311,8 +309,7 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	spin_lock_init(&phy->lock);
 
 	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
-		match = of_match_device(of_match_ptr(ti_pipe3_id_table),
-					&pdev->dev);
+		match = of_match_device(ti_pipe3_id_table, &pdev->dev);
 		if (!match)
 			return -EINVAL;
 
@@ -570,7 +567,6 @@ static const struct dev_pm_ops ti_pipe3_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
 };
 
-#ifdef CONFIG_OF
 static const struct of_device_id ti_pipe3_id_table[] = {
 	{
 		.compatible = "ti,phy-usb3",
@@ -590,7 +586,6 @@ static const struct of_device_id ti_pipe3_id_table[] = {
 	{}
 };
 MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);
-#endif
 
 static struct platform_driver ti_pipe3_driver = {
 	.probe		= ti_pipe3_probe,
@@ -598,7 +593,7 @@ static struct platform_driver ti_pipe3_driver = {
 	.driver		= {
 		.name	= "ti-pipe3",
 		.pm	= &ti_pipe3_pm_ops,
-		.of_match_table = of_match_ptr(ti_pipe3_id_table),
+		.of_match_table = ti_pipe3_id_table,
 	},
 };
 
diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c
index 2263cd010032..385362e5b2f6 100644
--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -1657,7 +1657,6 @@ static int xgene_phy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 	struct xgene_phy_ctx *ctx;
 	struct resource *res;
-	int rc = 0;
 	u32 default_spd[] = DEFAULT_SATA_SPD_SEL;
 	u32 default_txboost_gain[] = DEFAULT_SATA_TXBOOST_GAIN;
 	u32 default_txeye_direction[] = DEFAULT_SATA_TXEYEDIRECTION;
@@ -1676,10 +1675,8 @@ static int xgene_phy_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	ctx->sds_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ctx->sds_base)) {
-		rc = PTR_ERR(ctx->sds_base);
-		goto error;
-	}
+	if (IS_ERR(ctx->sds_base))
+		return PTR_ERR(ctx->sds_base);
 
 	/* Retrieve optional clock */
 	ctx->clk = clk_get(&pdev->dev, NULL);
@@ -1709,22 +1706,12 @@ static int xgene_phy_probe(struct platform_device *pdev)
 	ctx->phy = devm_phy_create(ctx->dev, NULL, &xgene_phy_ops);
 	if (IS_ERR(ctx->phy)) {
 		dev_dbg(&pdev->dev, "Failed to create PHY\n");
-		rc = PTR_ERR(ctx->phy);
-		goto error;
+		return PTR_ERR(ctx->phy);
 	}
 	phy_set_drvdata(ctx->phy, ctx);
 
-	phy_provider = devm_of_phy_provider_register(ctx->dev,
-						     xgene_phy_xlate);
-	if (IS_ERR(phy_provider)) {
-		rc = PTR_ERR(phy_provider);
-		goto error;
-	}
-
-	return 0;
-
-error:
-	return rc;
+	phy_provider = devm_of_phy_provider_register(ctx->dev, xgene_phy_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
 static const struct of_device_id xgene_phy_of_match[] = {
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 2f1e2aa42b44..d8926c6cd2a8 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -5,6 +5,7 @@
 # Object files in subdirectories
 
 obj-$(CONFIG_USB)		+= core/
+obj-$(CONFIG_USB_SUPPORT)	+= phy/
 
 obj-$(CONFIG_USB_DWC3)		+= dwc3/
 obj-$(CONFIG_USB_DWC2)		+= dwc2/
@@ -48,7 +49,6 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
-obj-$(CONFIG_USB_SUPPORT)	+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 5a459377574b..888998a7fe31 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -952,7 +952,7 @@ static void uea_load_page_e1(struct work_struct *work)
 	int i;
 
 	/* reload firmware when reboot start and it's loaded already */
-	if (ovl == 0 && pageno == 0 && sc->dsp_firm) {
+	if (ovl == 0 && pageno == 0) {
 		release_firmware(sc->dsp_firm);
 		sc->dsp_firm = NULL;
 	}
@@ -1074,7 +1074,7 @@ static void uea_load_page_e4(struct work_struct *work)
 	uea_dbg(INS_TO_USBDEV(sc), "sending DSP page %u\n", pageno);
 
 	/* reload firmware when reboot start and it's loaded already */
-	if (pageno == 0 && sc->dsp_firm) {
+	if (pageno == 0) {
 		release_firmware(sc->dsp_firm);
 		sc->dsp_firm = NULL;
 	}
diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c
index 20ec4eee1ac8..c2d13968da82 100644
--- a/drivers/usb/c67x00/c67x00-hcd.c
+++ b/drivers/usb/c67x00/c67x00-hcd.c
@@ -34,7 +34,7 @@
 
 static __u8 c67x00_hub_des[] = {
 	0x09,			/*  __u8  bLength; */
-	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
+	USB_DT_HUB,		/*  __u8  bDescriptorType; Hub-descriptor */
 	0x02,			/*  __u8  bNbrPorts; */
 	0x00,			/* __u16  wHubCharacteristics; */
 	0x00,			/*   (per-port OC, no power switching) */
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 77b47d82c9a6..5ce3f1d6a6ed 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -10,6 +10,17 @@ config USB_CHIPIDEA
 
 if USB_CHIPIDEA
 
+config USB_CHIPIDEA_OF
+	tristate
+	depends on OF
+	default USB_CHIPIDEA
+
+config USB_CHIPIDEA_PCI
+	tristate
+	depends on PCI
+	depends on NOP_USB_XCEIV
+	default USB_CHIPIDEA
+
 config USB_CHIPIDEA_UDC
 	bool "ChipIdea device controller"
 	depends on USB_GADGET
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 1fc86a2ca22d..4decb12f2578 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -14,11 +14,6 @@ obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_usb2.o
 obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_msm.o
 obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_zevio.o
 
-# PCI doesn't provide stubs, need to check
-ifneq ($(CONFIG_PCI),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_pci.o
-endif
+obj-$(CONFIG_USB_CHIPIDEA_PCI)	+= ci_hdrc_pci.o
 
-ifneq ($(CONFIG_OF),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= usbmisc_imx.o ci_hdrc_imx.o
-endif
+obj-$(CONFIG_USB_CHIPIDEA_OF)	+= usbmisc_imx.o ci_hdrc_imx.o
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index ca57e3dcd3d5..3cb9bda51ddf 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -15,6 +15,16 @@
 
 #include <linux/usb/ehci_def.h>
 
+/*
+ * ID
+ * For 1.x revision, bit24 - bit31 are reserved
+ * For 2.x revision, bit25 - bit28 are 0x2
+ */
+#define TAG		      (0x1F << 16)
+#define REVISION	      (0xF << 21)
+#define VERSION		      (0xF << 25)
+#define CIVERSION	      (0x7 << 29)
+
 /* HCCPARAMS */
 #define HCCPARAMS_LEN         BIT(17)
 
@@ -53,6 +63,7 @@
 #define PORTSC_HSP            BIT(9)
 #define PORTSC_PP             BIT(12)
 #define PORTSC_PTC            (0x0FUL << 16)
+#define PORTSC_WKCN           BIT(20)
 #define PORTSC_PHCD(d)	      ((d) ? BIT(22) : BIT(23))
 /* PTS and PTW for non lpm version only */
 #define PORTSC_PFSC           BIT(24)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 65913d48f0c8..6d6200e37b71 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -29,6 +29,15 @@
 /******************************************************************************
  * REGISTERS
  *****************************************************************************/
+/* Identification Registers */
+#define ID_ID				0x0
+#define ID_HWGENERAL			0x4
+#define ID_HWHOST			0x8
+#define ID_HWDEVICE			0xc
+#define ID_HWTXBUF			0x10
+#define ID_HWRXBUF			0x14
+#define ID_SBUSCFG			0x90
+
 /* register indices */
 enum ci_hw_regs {
 	CAP_CAPLENGTH,
@@ -97,6 +106,18 @@ enum ci_role {
 	CI_ROLE_END,
 };
 
+enum ci_revision {
+	CI_REVISION_1X = 10,	/* Revision 1.x */
+	CI_REVISION_20 = 20, /* Revision 2.0 */
+	CI_REVISION_21, /* Revision 2.1 */
+	CI_REVISION_22, /* Revision 2.2 */
+	CI_REVISION_23, /* Revision 2.3 */
+	CI_REVISION_24, /* Revision 2.4 */
+	CI_REVISION_25, /* Revision 2.5 */
+	CI_REVISION_25_PLUS, /* Revision above than 2.5 */
+	CI_REVISION_UNKNOWN = 99, /* Unknown Revision */
+};
+
 /**
  * struct ci_role_driver - host/gadget role driver
  * @start: start this role
@@ -141,7 +162,10 @@ struct hw_bank {
  * @role: current role
  * @is_otg: if the device is otg-capable
  * @fsm: otg finite state machine
- * @fsm_timer: pointer to timer list of otg fsm
+ * @otg_fsm_hrtimer: hrtimer for otg fsm timers
+ * @hr_timeouts: time out list for active otg fsm timers
+ * @enabled_otg_timer_bits: bits of enabled otg timers
+ * @next_otg_timer: next nearest enabled timer to be expired
  * @work: work for role changing
  * @wq: workqueue thread
  * @qh_pool: allocation pool for queue heads
@@ -169,6 +193,10 @@ struct hw_bank {
  * @b_sess_valid_event: indicates there is a vbus event, and handled
  * at ci_otg_work
  * @imx28_write_fix: Freescale imx28 needs swp instruction for writing
+ * @supports_runtime_pm: if runtime pm is supported
+ * @in_lpm: if the core in low power mode
+ * @wakeup_int: if wakeup interrupt occur
+ * @rev: The revision number for controller
  */
 struct ci_hdrc {
 	struct device			*dev;
@@ -180,7 +208,10 @@ struct ci_hdrc {
 	bool				is_otg;
 	struct usb_otg			otg;
 	struct otg_fsm			fsm;
-	struct ci_otg_fsm_timer_list	*fsm_timer;
+	struct hrtimer			otg_fsm_hrtimer;
+	ktime_t				hr_timeouts[NUM_OTG_FSM_TIMERS];
+	unsigned			enabled_otg_timer_bits;
+	enum otg_fsm_timer		next_otg_timer;
 	struct work_struct		work;
 	struct workqueue_struct		*wq;
 
@@ -211,6 +242,10 @@ struct ci_hdrc {
 	bool				id_event;
 	bool				b_sess_valid_event;
 	bool				imx28_write_fix;
+	bool				supports_runtime_pm;
+	bool				in_lpm;
+	bool				wakeup_int;
+	enum ci_revision		rev;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
@@ -248,6 +283,36 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
 }
 
 /**
+ * hw_read_id_reg: reads from a identification register
+ * @ci: the controller
+ * @offset: offset from the beginning of identification registers region
+ * @mask: bitfield mask
+ *
+ * This function returns register contents
+ */
+static inline u32 hw_read_id_reg(struct ci_hdrc *ci, u32 offset, u32 mask)
+{
+	return ioread32(ci->hw_bank.abs + offset) & mask;
+}
+
+/**
+ * hw_write_id_reg: writes to a identification register
+ * @ci: the controller
+ * @offset: offset from the beginning of identification registers region
+ * @mask: bitfield mask
+ * @data: new value
+ */
+static inline void hw_write_id_reg(struct ci_hdrc *ci, u32 offset,
+			    u32 mask, u32 data)
+{
+	if (~mask)
+		data = (ioread32(ci->hw_bank.abs + offset) & ~mask)
+			| (data & mask);
+
+	iowrite32(data, ci->hw_bank.abs + offset);
+}
+
+/**
  * hw_read: reads from a hw register
  * @ci: the controller
  * @reg:  register index
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 0f05de7c6b6c..389f0e034259 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -23,22 +23,40 @@
 #include "ci.h"
 #include "ci_hdrc_imx.h"
 
-#define CI_HDRC_IMX_IMX28_WRITE_FIX BIT(0)
-
 struct ci_hdrc_imx_platform_flag {
 	unsigned int flags;
+	bool runtime_pm;
 };
 
 static const struct ci_hdrc_imx_platform_flag imx27_usb_data = {
 };
 
 static const struct ci_hdrc_imx_platform_flag imx28_usb_data = {
-	.flags = CI_HDRC_IMX_IMX28_WRITE_FIX,
+	.flags = CI_HDRC_IMX28_WRITE_FIX |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6q_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6sl_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
 };
 
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
 	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
+	{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
+	{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
+	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sl_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);
@@ -48,6 +66,8 @@ struct ci_hdrc_imx_data {
 	struct platform_device *ci_pdev;
 	struct clk *clk;
 	struct imx_usbmisc_data *usbmisc_data;
+	bool supports_runtime_pm;
+	bool in_lpm;
 };
 
 /* Common functions shared by usbmisc drivers */
@@ -145,21 +165,18 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 	}
 
 	pdata.usb_phy = data->phy;
-
-	if (imx_platform_flag->flags & CI_HDRC_IMX_IMX28_WRITE_FIX)
-		pdata.flags |= CI_HDRC_IMX28_WRITE_FIX;
+	pdata.flags |= imx_platform_flag->flags;
+	if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM)
+		data->supports_runtime_pm = true;
 
 	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret)
 		goto err_clk;
 
-	if (data->usbmisc_data) {
-		ret = imx_usbmisc_init(data->usbmisc_data);
-		if (ret) {
-			dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n",
-					ret);
-			goto err_clk;
-		}
+	ret = imx_usbmisc_init(data->usbmisc_data);
+	if (ret) {
+		dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret);
+		goto err_clk;
 	}
 
 	data->ci_pdev = ci_hdrc_add_device(&pdev->dev,
@@ -173,19 +190,20 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	if (data->usbmisc_data) {
-		ret = imx_usbmisc_init_post(data->usbmisc_data);
-		if (ret) {
-			dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n",
-					ret);
-			goto disable_device;
-		}
+	ret = imx_usbmisc_init_post(data->usbmisc_data);
+	if (ret) {
+		dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", ret);
+		goto disable_device;
 	}
 
 	platform_set_drvdata(pdev, data);
 
-	pm_runtime_no_callbacks(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
+	if (data->supports_runtime_pm) {
+		pm_runtime_set_active(&pdev->dev);
+		pm_runtime_enable(&pdev->dev);
+	}
+
+	device_set_wakeup_capable(&pdev->dev, true);
 
 	return 0;
 
@@ -200,14 +218,18 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
 {
 	struct ci_hdrc_imx_data *data = platform_get_drvdata(pdev);
 
-	pm_runtime_disable(&pdev->dev);
+	if (data->supports_runtime_pm) {
+		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		pm_runtime_put_noidle(&pdev->dev);
+	}
 	ci_hdrc_remove_device(data->ci_pdev);
 	clk_disable_unprepare(data->clk);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 static int imx_controller_suspend(struct device *dev)
 {
 	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
@@ -215,6 +237,7 @@ static int imx_controller_suspend(struct device *dev)
 	dev_dbg(dev, "at %s\n", __func__);
 
 	clk_disable_unprepare(data->clk);
+	data->in_lpm = true;
 
 	return 0;
 }
@@ -222,25 +245,103 @@ static int imx_controller_suspend(struct device *dev)
 static int imx_controller_resume(struct device *dev)
 {
 	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret = 0;
 
 	dev_dbg(dev, "at %s\n", __func__);
 
-	return clk_prepare_enable(data->clk);
+	if (!data->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
+
+	data->in_lpm = false;
+
+	ret = imx_usbmisc_set_wakeup(data->usbmisc_data, false);
+	if (ret) {
+		dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
+		goto clk_disable;
+	}
+
+	return 0;
+
+clk_disable:
+	clk_disable_unprepare(data->clk);
+	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int ci_hdrc_imx_suspend(struct device *dev)
 {
+	int ret;
+
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+
+	if (data->in_lpm)
+		/* The core's suspend doesn't run */
+		return 0;
+
+	if (device_may_wakeup(dev)) {
+		ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
+		if (ret) {
+			dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n",
+					ret);
+			return ret;
+		}
+	}
+
 	return imx_controller_suspend(dev);
 }
 
 static int ci_hdrc_imx_resume(struct device *dev)
 {
-	return imx_controller_resume(dev);
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	ret = imx_controller_resume(dev);
+	if (!ret && data->supports_runtime_pm) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
 }
 #endif /* CONFIG_PM_SLEEP */
 
+static int ci_hdrc_imx_runtime_suspend(struct device *dev)
+{
+	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
+	int ret;
+
+	if (data->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	ret = imx_usbmisc_set_wakeup(data->usbmisc_data, true);
+	if (ret) {
+		dev_err(dev, "usbmisc set_wakeup failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	return imx_controller_suspend(dev);
+}
+
+static int ci_hdrc_imx_runtime_resume(struct device *dev)
+{
+	return imx_controller_resume(dev);
+}
+
+#endif /* CONFIG_PM */
+
 static const struct dev_pm_ops ci_hdrc_imx_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ci_hdrc_imx_suspend, ci_hdrc_imx_resume)
+	SET_RUNTIME_PM_OPS(ci_hdrc_imx_runtime_suspend,
+			ci_hdrc_imx_runtime_resume, NULL)
 };
 static struct platform_driver ci_hdrc_imx_driver = {
 	.probe = ci_hdrc_imx_probe,
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index 4ed828f75a1e..635717e9354a 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -22,5 +22,6 @@ struct imx_usbmisc_data {
 
 int imx_usbmisc_init(struct imx_usbmisc_data *);
 int imx_usbmisc_init_post(struct imx_usbmisc_data *);
+int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *, bool);
 
 #endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */
diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c
index 4df669437211..773d150512fa 100644
--- a/drivers/usb/chipidea/ci_hdrc_pci.c
+++ b/drivers/usb/chipidea/ci_hdrc_pci.c
@@ -16,10 +16,16 @@
 #include <linux/interrupt.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/chipidea.h>
+#include <linux/usb/usb_phy_generic.h>
 
 /* driver name */
 #define UDC_DRIVER_NAME   "ci_hdrc_pci"
 
+struct ci_hdrc_pci {
+	struct platform_device	*ci;
+	struct platform_device	*phy;
+};
+
 /******************************************************************************
  * PCI block
  *****************************************************************************/
@@ -52,7 +58,7 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
 				       const struct pci_device_id *id)
 {
 	struct ci_hdrc_platform_data *platdata = (void *)id->driver_data;
-	struct platform_device *plat_ci;
+	struct ci_hdrc_pci *ci;
 	struct resource res[3];
 	int retval = 0, nres = 2;
 
@@ -61,6 +67,10 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
 		return -ENODEV;
 	}
 
+	ci = devm_kzalloc(&pdev->dev, sizeof(*ci), GFP_KERNEL);
+	if (!ci)
+		return -ENOMEM;
+
 	retval = pcim_enable_device(pdev);
 	if (retval)
 		return retval;
@@ -73,6 +83,11 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
+	/* register a nop PHY */
+	ci->phy = usb_phy_generic_register();
+	if (!ci->phy)
+		return -ENOMEM;
+
 	memset(res, 0, sizeof(res));
 	res[0].start	= pci_resource_start(pdev, 0);
 	res[0].end	= pci_resource_end(pdev, 0);
@@ -80,13 +95,14 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
 	res[1].start	= pdev->irq;
 	res[1].flags	= IORESOURCE_IRQ;
 
-	plat_ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata);
-	if (IS_ERR(plat_ci)) {
+	ci->ci = ci_hdrc_add_device(&pdev->dev, res, nres, platdata);
+	if (IS_ERR(ci->ci)) {
 		dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
-		return PTR_ERR(plat_ci);
+		usb_phy_generic_unregister(ci->phy);
+		return PTR_ERR(ci->ci);
 	}
 
-	pci_set_drvdata(pdev, plat_ci);
+	pci_set_drvdata(pdev, ci);
 
 	return 0;
 }
@@ -101,9 +117,10 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
  */
 static void ci_hdrc_pci_remove(struct pci_dev *pdev)
 {
-	struct platform_device *plat_ci = pci_get_drvdata(pdev);
+	struct ci_hdrc_pci *ci = pci_get_drvdata(pdev);
 
-	ci_hdrc_remove_device(plat_ci);
+	ci_hdrc_remove_device(ci->ci);
+	usb_phy_generic_unregister(ci->phy);
 }
 
 /**
diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c
index d976fc1db73a..1264de505527 100644
--- a/drivers/usb/chipidea/ci_hdrc_zevio.c
+++ b/drivers/usb/chipidea/ci_hdrc_zevio.c
@@ -18,7 +18,7 @@
 
 static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = {
 	.name			= "ci_hdrc_zevio",
-	.flags			= CI_HDRC_REGS_SHARED,
+	.flags			= CI_HDRC_REGS_SHARED | CI_HDRC_FORCE_FULLSPEED,
 	.capoffset		= DEF_CAPOFFSET,
 };
 
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index a57dc8866fc5..74fea4fa41b1 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -137,6 +137,22 @@ static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
 	return 0;
 }
 
+static enum ci_revision ci_get_revision(struct ci_hdrc *ci)
+{
+	int ver = hw_read_id_reg(ci, ID_ID, VERSION) >> __ffs(VERSION);
+	enum ci_revision rev = CI_REVISION_UNKNOWN;
+
+	if (ver == 0x2) {
+		rev = hw_read_id_reg(ci, ID_ID, REVISION)
+			>> __ffs(REVISION);
+		rev += CI_REVISION_20;
+	} else if (ver == 0x0) {
+		rev = CI_REVISION_1X;
+	}
+
+	return rev;
+}
+
 /**
  * hw_read_intr_enable: returns interrupt enable register
  *
@@ -251,8 +267,11 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
 	/* Clear all interrupts status bits*/
 	hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
 
-	dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
-		ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
+	ci->rev = ci_get_revision(ci);
+
+	dev_dbg(ci->dev,
+		"ChipIdea HDRC found, revision: %d, lpm: %d; cap: %p op: %p\n",
+		ci->rev, ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 
 	/* setup lock mode ? */
 
@@ -491,6 +510,13 @@ static irqreturn_t ci_irq(int irq, void *data)
 	irqreturn_t ret = IRQ_NONE;
 	u32 otgsc = 0;
 
+	if (ci->in_lpm) {
+		disable_irq_nosync(irq);
+		ci->wakeup_int = true;
+		pm_runtime_get(ci->dev);
+		return IRQ_HANDLED;
+	}
+
 	if (ci->is_otg) {
 		otgsc = hw_read_otgsc(ci, ~0);
 		if (ci_otg_is_fsm_mode(ci)) {
@@ -642,8 +668,12 @@ static void ci_get_otg_capable(struct ci_hdrc *ci)
 		ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
 				DCCPARAMS_DC | DCCPARAMS_HC)
 					== (DCCPARAMS_DC | DCCPARAMS_HC));
-	if (ci->is_otg)
+	if (ci->is_otg) {
 		dev_dbg(ci->dev, "It is OTG capable controller\n");
+		/* Disable and clear all OTG irq */
+		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+							OTGSC_INT_STATUS_BITS);
+	}
 }
 
 static int ci_hdrc_probe(struct platform_device *pdev)
@@ -673,6 +703,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	ci->platdata = dev_get_platdata(dev);
 	ci->imx28_write_fix = !!(ci->platdata->flags &
 		CI_HDRC_IMX28_WRITE_FIX);
+	ci->supports_runtime_pm = !!(ci->platdata->flags &
+		CI_HDRC_SUPPORTS_RUNTIME_PM);
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
@@ -740,9 +772,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	}
 
 	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
-		/* Disable and clear all OTG irq */
-		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
-							OTGSC_INT_STATUS_BITS);
 		ret = ci_hdrc_otg_init(ci);
 		if (ret) {
 			dev_err(dev, "init otg fails, ret = %d\n", ret);
@@ -769,11 +798,11 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 			: CI_ROLE_GADGET;
 	}
 
-	/* only update vbus status for peripheral */
-	if (ci->role == CI_ROLE_GADGET)
-		ci_handle_vbus_change(ci);
-
 	if (!ci_otg_is_fsm_mode(ci)) {
+		/* only update vbus status for peripheral */
+		if (ci->role == CI_ROLE_GADGET)
+			ci_handle_vbus_change(ci);
+
 		ret = ci_role_start(ci, ci->role);
 		if (ret) {
 			dev_err(dev, "can't start %s role\n",
@@ -788,9 +817,19 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (ret)
 		goto stop;
 
+	if (ci->supports_runtime_pm) {
+		pm_runtime_set_active(&pdev->dev);
+		pm_runtime_enable(&pdev->dev);
+		pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+		pm_runtime_mark_last_busy(ci->dev);
+		pm_runtime_use_autosuspend(&pdev->dev);
+	}
+
 	if (ci_otg_is_fsm_mode(ci))
 		ci_hdrc_otg_fsm_start(ci);
 
+	device_set_wakeup_capable(&pdev->dev, true);
+
 	ret = dbg_create_files(ci);
 	if (!ret)
 		return 0;
@@ -807,6 +846,12 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 {
 	struct ci_hdrc *ci = platform_get_drvdata(pdev);
 
+	if (ci->supports_runtime_pm) {
+		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		pm_runtime_put_noidle(&pdev->dev);
+	}
+
 	dbg_remove_files(ci);
 	ci_role_destroy(ci);
 	ci_hdrc_enter_lpm(ci, true);
@@ -815,13 +860,41 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
+/* Prepare wakeup by SRP before suspend */
+static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
+{
+	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
+				!hw_read_otgsc(ci, OTGSC_ID)) {
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP,
+								PORTSC_PP);
+		hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_WKCN,
+								PORTSC_WKCN);
+	}
+}
+
+/* Handle SRP when wakeup by data pulse */
+static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
+{
+	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
+		(ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
+		if (!hw_read_otgsc(ci, OTGSC_ID)) {
+			ci->fsm.a_srp_det = 1;
+			ci->fsm.a_bus_drop = 0;
+		} else {
+			ci->fsm.id = 1;
+		}
+		ci_otg_queue_work(ci);
+	}
+}
+
 static void ci_controller_suspend(struct ci_hdrc *ci)
 {
+	disable_irq(ci->irq);
 	ci_hdrc_enter_lpm(ci, true);
-
-	if (ci->usb_phy)
-		usb_phy_set_suspend(ci->usb_phy, 1);
+	usb_phy_set_suspend(ci->usb_phy, 1);
+	ci->in_lpm = true;
+	enable_irq(ci->irq);
 }
 
 static int ci_controller_resume(struct device *dev)
@@ -830,23 +903,59 @@ static int ci_controller_resume(struct device *dev)
 
 	dev_dbg(dev, "at %s\n", __func__);
 
-	ci_hdrc_enter_lpm(ci, false);
+	if (!ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
 
+	ci_hdrc_enter_lpm(ci, false);
 	if (ci->usb_phy) {
 		usb_phy_set_suspend(ci->usb_phy, 0);
 		usb_phy_set_wakeup(ci->usb_phy, false);
 		hw_wait_phy_stable();
 	}
 
+	ci->in_lpm = false;
+	if (ci->wakeup_int) {
+		ci->wakeup_int = false;
+		pm_runtime_mark_last_busy(ci->dev);
+		pm_runtime_put_autosuspend(ci->dev);
+		enable_irq(ci->irq);
+		if (ci_otg_is_fsm_mode(ci))
+			ci_otg_fsm_wakeup_by_srp(ci);
+	}
+
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int ci_suspend(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 
 	if (ci->wq)
 		flush_workqueue(ci->wq);
+	/*
+	 * Controller needs to be active during suspend, otherwise the core
+	 * may run resume when the parent is at suspend if other driver's
+	 * suspend fails, it occurs before parent's suspend has not started,
+	 * but the core suspend has finished.
+	 */
+	if (ci->in_lpm)
+		pm_runtime_resume(dev);
+
+	if (ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (device_may_wakeup(dev)) {
+		if (ci_otg_is_fsm_mode(ci))
+			ci_otg_fsm_suspend_for_srp(ci);
+
+		usb_phy_set_wakeup(ci->usb_phy, true);
+		enable_irq_wake(ci->irq);
+	}
 
 	ci_controller_suspend(ci);
 
@@ -855,13 +964,57 @@ static int ci_suspend(struct device *dev)
 
 static int ci_resume(struct device *dev)
 {
-	return ci_controller_resume(dev);
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret;
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(ci->irq);
+
+	ret = ci_controller_resume(dev);
+	if (ret)
+		return ret;
+
+	if (ci->supports_runtime_pm) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return ret;
 }
 #endif /* CONFIG_PM_SLEEP */
 
+static int ci_runtime_suspend(struct device *dev)
+{
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "at %s\n", __func__);
+
+	if (ci->in_lpm) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (ci_otg_is_fsm_mode(ci))
+		ci_otg_fsm_suspend_for_srp(ci);
+
+	usb_phy_set_wakeup(ci->usb_phy, true);
+	ci_controller_suspend(ci);
+
+	return 0;
+}
+
+static int ci_runtime_resume(struct device *dev)
+{
+	return ci_controller_resume(dev);
+}
+
+#endif /* CONFIG_PM */
 static const struct dev_pm_ops ci_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
+	SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
 };
+
 static struct platform_driver ci_hdrc_driver = {
 	.probe	= ci_hdrc_probe,
 	.remove	= ci_hdrc_remove,
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index 268e4236e84c..dfb05edcdb96 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -336,8 +336,8 @@ static int ci_registers_show(struct seq_file *s, void *unused)
 	struct ci_hdrc *ci = s->private;
 	u32 tmp_reg;
 
-	if (!ci)
-		return 0;
+	if (!ci || ci->in_lpm)
+		return -EPERM;
 
 	/* ------ Registers ----- */
 	tmp_reg = hw_read_intr_enable(ci);
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 48731d0bab35..21fe1a314313 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -33,6 +33,7 @@
 #include "host.h"
 
 static struct hc_driver __read_mostly ci_ehci_hc_driver;
+static int (*orig_bus_suspend)(struct usb_hcd *hcd);
 
 struct ehci_ci_priv {
 	struct regulator *reg_vbus;
@@ -43,11 +44,10 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
 	struct device *dev = hcd->self.controller;
-	struct ci_hdrc *ci = dev_get_drvdata(dev);
 	int ret = 0;
 	int port = HCS_N_PORTS(ehci->hcs_params);
 
-	if (priv->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
+	if (priv->reg_vbus) {
 		if (port > 1) {
 			dev_warn(dev,
 				"Not support multi-port regulator control\n");
@@ -113,12 +113,23 @@ static int host_start(struct ci_hdrc *ci)
 	priv = (struct ehci_ci_priv *)ehci->priv;
 	priv->reg_vbus = NULL;
 
-	if (ci->platdata->reg_vbus)
-		priv->reg_vbus = ci->platdata->reg_vbus;
+	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
+		if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) {
+			ret = regulator_enable(ci->platdata->reg_vbus);
+			if (ret) {
+				dev_err(ci->dev,
+				"Failed to enable vbus regulator, ret=%d\n",
+									ret);
+				goto put_hcd;
+			}
+		} else {
+			priv->reg_vbus = ci->platdata->reg_vbus;
+		}
+	}
 
 	ret = usb_add_hcd(hcd, 0, 0);
 	if (ret) {
-		goto put_hcd;
+		goto disable_reg;
 	} else {
 		struct usb_otg *otg = &ci->otg;
 
@@ -133,8 +144,15 @@ static int host_start(struct ci_hdrc *ci)
 	if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
 		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
 
+	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED)
+		hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
+
 	return ret;
 
+disable_reg:
+	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
+			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
+		regulator_disable(ci->platdata->reg_vbus);
 put_hcd:
 	usb_put_hcd(hcd);
 
@@ -148,6 +166,9 @@ static void host_stop(struct ci_hdrc *ci)
 	if (hcd) {
 		usb_remove_hcd(hcd);
 		usb_put_hcd(hcd);
+		if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) &&
+			(ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON))
+				regulator_disable(ci->platdata->reg_vbus);
 	}
 }
 
@@ -158,6 +179,47 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci)
 		host_stop(ci);
 }
 
+static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int port;
+	u32 tmp;
+
+	int ret = orig_bus_suspend(hcd);
+
+	if (ret)
+		return ret;
+
+	port = HCS_N_PORTS(ehci->hcs_params);
+	while (port--) {
+		u32 __iomem *reg = &ehci->regs->port_status[port];
+		u32 portsc = ehci_readl(ehci, reg);
+
+		if (portsc & PORT_CONNECT) {
+			/*
+			 * For chipidea, the resume signal will be ended
+			 * automatically, so for remote wakeup case, the
+			 * usbcmd.rs may not be set before the resume has
+			 * ended if other resume paths consumes too much
+			 * time (~24ms), in that case, the SOF will not
+			 * send out within 3ms after resume ends, then the
+			 * high speed device will enter full speed mode.
+			 */
+
+			tmp = ehci_readl(ehci, &ehci->regs->command);
+			tmp |= CMD_RUN;
+			ehci_writel(ehci, tmp, &ehci->regs->command);
+			/*
+			 * It needs a short delay between set RS bit and PHCD.
+			 */
+			usleep_range(150, 200);
+			break;
+		}
+	}
+
+	return 0;
+}
+
 int ci_hdrc_host_init(struct ci_hdrc *ci)
 {
 	struct ci_role_driver *rdrv;
@@ -176,6 +238,8 @@ int ci_hdrc_host_init(struct ci_hdrc *ci)
 	ci->roles[CI_ROLE_HOST] = rdrv;
 
 	ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
+	orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
+	ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
 
 	return 0;
 }
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index a048b08b9d4d..ad6c87a4653c 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -96,6 +96,7 @@ static void ci_otg_work(struct work_struct *work)
 		return;
 	}
 
+	pm_runtime_get_sync(ci->dev);
 	if (ci->id_event) {
 		ci->id_event = false;
 		ci_handle_id_switch(ci);
@@ -104,6 +105,7 @@ static void ci_otg_work(struct work_struct *work)
 		ci_handle_vbus_change(ci);
 	} else
 		dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
+	pm_runtime_put_sync(ci->dev);
 
 	enable_irq(ci->irq);
 }
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index 562e581f6765..083acf45ad5a 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -30,22 +30,6 @@
 #include "otg.h"
 #include "otg_fsm.h"
 
-static struct ci_otg_fsm_timer *otg_timer_initializer
-(struct ci_hdrc *ci, void (*function)(void *, unsigned long),
-			unsigned long expires, unsigned long data)
-{
-	struct ci_otg_fsm_timer *timer;
-
-	timer = devm_kzalloc(ci->dev, sizeof(struct ci_otg_fsm_timer),
-								GFP_KERNEL);
-	if (!timer)
-		return NULL;
-	timer->function = function;
-	timer->expires = expires;
-	timer->data = data;
-	return timer;
-}
-
 /* Add for otg: interact with user space app */
 static ssize_t
 get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
@@ -204,229 +188,227 @@ static struct attribute_group inputs_attr_group = {
 };
 
 /*
+ * Keep this list in the same order as timers indexed
+ * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h
+ */
+static unsigned otg_timer_ms[] = {
+	TA_WAIT_VRISE,
+	TA_WAIT_VFALL,
+	TA_WAIT_BCON,
+	TA_AIDL_BDIS,
+	TB_ASE0_BRST,
+	TA_BIDL_ADIS,
+	TB_SE0_SRP,
+	TB_SRP_FAIL,
+	0,
+	TB_DATA_PLS,
+	TB_SSEND_SRP,
+};
+
+/*
  * Add timer to active timer list
  */
-static void ci_otg_add_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t)
+static void ci_otg_add_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 {
-	struct ci_otg_fsm_timer *tmp_timer;
-	struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t];
-	struct list_head *active_timers = &ci->fsm_timer->active_timers;
+	unsigned long flags, timer_sec, timer_nsec;
 
-	if (t >= NUM_CI_OTG_FSM_TIMERS)
+	if (t >= NUM_OTG_FSM_TIMERS)
 		return;
 
-	/*
-	 * Check if the timer is already in the active list,
-	 * if so update timer count
-	 */
-	list_for_each_entry(tmp_timer, active_timers, list)
-		if (tmp_timer == timer) {
-			timer->count = timer->expires;
-			return;
-		}
-
-	timer->count = timer->expires;
-	list_add_tail(&timer->list, active_timers);
-
-	/* Enable 1ms irq */
-	if (!(hw_read_otgsc(ci, OTGSC_1MSIE)))
-		hw_write_otgsc(ci, OTGSC_1MSIE, OTGSC_1MSIE);
+	spin_lock_irqsave(&ci->lock, flags);
+	timer_sec = otg_timer_ms[t] / MSEC_PER_SEC;
+	timer_nsec = (otg_timer_ms[t] % MSEC_PER_SEC) * NSEC_PER_MSEC;
+	ci->hr_timeouts[t] = ktime_add(ktime_get(),
+				ktime_set(timer_sec, timer_nsec));
+	ci->enabled_otg_timer_bits |= (1 << t);
+	if ((ci->next_otg_timer == NUM_OTG_FSM_TIMERS) ||
+			(ci->hr_timeouts[ci->next_otg_timer].tv64 >
+						ci->hr_timeouts[t].tv64)) {
+			ci->next_otg_timer = t;
+			hrtimer_start_range_ns(&ci->otg_fsm_hrtimer,
+					ci->hr_timeouts[t], NSEC_PER_MSEC,
+							HRTIMER_MODE_ABS);
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
 }
 
 /*
  * Remove timer from active timer list
  */
-static void ci_otg_del_timer(struct ci_hdrc *ci, enum ci_otg_fsm_timer_index t)
+static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
 {
-	struct ci_otg_fsm_timer *tmp_timer, *del_tmp;
-	struct ci_otg_fsm_timer *timer = ci->fsm_timer->timer_list[t];
-	struct list_head *active_timers = &ci->fsm_timer->active_timers;
+	unsigned long flags, enabled_timer_bits;
+	enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS;
 
-	if (t >= NUM_CI_OTG_FSM_TIMERS)
+	if ((t >= NUM_OTG_FSM_TIMERS) ||
+			!(ci->enabled_otg_timer_bits & (1 << t)))
 		return;
 
-	list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list)
-		if (tmp_timer == timer)
-			list_del(&timer->list);
-
-	/* Disable 1ms irq if there is no any active timer */
-	if (list_empty(active_timers))
-		hw_write_otgsc(ci, OTGSC_1MSIE, 0);
-}
-
-/*
- * Reduce timer count by 1, and find timeout conditions.
- * Called by otg 1ms timer interrupt
- */
-static inline int ci_otg_tick_timer(struct ci_hdrc *ci)
-{
-	struct ci_otg_fsm_timer *tmp_timer, *del_tmp;
-	struct list_head *active_timers = &ci->fsm_timer->active_timers;
-	int expired = 0;
-
-	list_for_each_entry_safe(tmp_timer, del_tmp, active_timers, list) {
-		tmp_timer->count--;
-		/* check if timer expires */
-		if (!tmp_timer->count) {
-			list_del(&tmp_timer->list);
-			tmp_timer->function(ci, tmp_timer->data);
-			expired = 1;
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->enabled_otg_timer_bits &= ~(1 << t);
+	if (ci->next_otg_timer == t) {
+		if (ci->enabled_otg_timer_bits == 0) {
+			/* No enabled timers after delete it */
+			hrtimer_cancel(&ci->otg_fsm_hrtimer);
+			ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
+		} else {
+			/* Find the next timer */
+			enabled_timer_bits = ci->enabled_otg_timer_bits;
+			for_each_set_bit(cur_timer, &enabled_timer_bits,
+							NUM_OTG_FSM_TIMERS) {
+				if ((next_timer == NUM_OTG_FSM_TIMERS) ||
+					(ci->hr_timeouts[next_timer].tv64 <
+					ci->hr_timeouts[cur_timer].tv64))
+					next_timer = cur_timer;
+			}
 		}
 	}
-
-	/* disable 1ms irq if there is no any timer active */
-	if ((expired == 1) && list_empty(active_timers))
-		hw_write_otgsc(ci, OTGSC_1MSIE, 0);
-
-	return expired;
+	if (next_timer != NUM_OTG_FSM_TIMERS) {
+		ci->next_otg_timer = next_timer;
+		hrtimer_start_range_ns(&ci->otg_fsm_hrtimer,
+			ci->hr_timeouts[next_timer], NSEC_PER_MSEC,
+							HRTIMER_MODE_ABS);
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
 }
 
-/* The timeout callback function to set time out bit */
-static void set_tmout(void *ptr, unsigned long indicator)
+/* OTG FSM timer handlers */
+static int a_wait_vrise_tmout(struct ci_hdrc *ci)
 {
-	*(int *)indicator = 1;
+	ci->fsm.a_wait_vrise_tmout = 1;
+	return 0;
 }
 
-static void set_tmout_and_fsm(void *ptr, unsigned long indicator)
+static int a_wait_vfall_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
-
-	set_tmout(ci, indicator);
-
-	ci_otg_queue_work(ci);
+	ci->fsm.a_wait_vfall_tmout = 1;
+	return 0;
 }
 
-static void a_wait_vfall_tmout_func(void *ptr, unsigned long indicator)
+static int a_wait_bcon_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
-
-	set_tmout(ci, indicator);
-	/* Disable port power */
-	hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS | PORTSC_PP, 0);
-	/* Clear existing DP irq */
-	hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS);
-	/* Enable data pulse irq */
-	hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE);
-	ci_otg_queue_work(ci);
+	ci->fsm.a_wait_bcon_tmout = 1;
+	return 0;
 }
 
-static void b_ase0_brst_tmout_func(void *ptr, unsigned long indicator)
+static int a_aidl_bdis_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
-
-	set_tmout(ci, indicator);
-	if (!hw_read_otgsc(ci, OTGSC_BSV))
-		ci->fsm.b_sess_vld = 0;
-
-	ci_otg_queue_work(ci);
+	ci->fsm.a_aidl_bdis_tmout = 1;
+	return 0;
 }
 
-static void b_ssend_srp_tmout_func(void *ptr, unsigned long indicator)
+static int b_ase0_brst_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
-
-	set_tmout(ci, indicator);
-
-	/* only vbus fall below B_sess_vld in b_idle state */
-	if (ci->fsm.otg->state == OTG_STATE_B_IDLE)
-		ci_otg_queue_work(ci);
+	ci->fsm.b_ase0_brst_tmout = 1;
+	return 0;
 }
 
-static void b_sess_vld_tmout_func(void *ptr, unsigned long indicator)
+static int a_bidl_adis_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
+	ci->fsm.a_bidl_adis_tmout = 1;
+	return 0;
+}
 
-	/* Check if A detached */
-	if (!(hw_read_otgsc(ci, OTGSC_BSV))) {
-		ci->fsm.b_sess_vld = 0;
-		ci_otg_add_timer(ci, B_SSEND_SRP);
-		ci_otg_queue_work(ci);
-	}
+static int b_se0_srp_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_se0_srp = 1;
+	return 0;
 }
 
-static void b_data_pulse_end(void *ptr, unsigned long indicator)
+static int b_srp_fail_tmout(struct ci_hdrc *ci)
 {
-	struct ci_hdrc *ci = (struct ci_hdrc *)ptr;
+	ci->fsm.b_srp_done = 1;
+	return 1;
+}
 
+static int b_data_pls_tmout(struct ci_hdrc *ci)
+{
 	ci->fsm.b_srp_done = 1;
 	ci->fsm.b_bus_req = 0;
 	if (ci->fsm.power_up)
 		ci->fsm.power_up = 0;
-
 	hw_write_otgsc(ci, OTGSC_HABA, 0);
+	pm_runtime_put(ci->dev);
+	return 0;
+}
 
-	ci_otg_queue_work(ci);
+static int b_ssend_srp_tmout(struct ci_hdrc *ci)
+{
+	ci->fsm.b_ssend_srp = 1;
+	/* only vbus fall below B_sess_vld in b_idle state */
+	if (ci->fsm.otg->state == OTG_STATE_B_IDLE)
+		return 0;
+	else
+		return 1;
+}
+
+/*
+ * Keep this list in the same order as timers indexed
+ * by enum otg_fsm_timer in include/linux/usb/otg-fsm.h
+ */
+static int (*otg_timer_handlers[])(struct ci_hdrc *) = {
+	a_wait_vrise_tmout,	/* A_WAIT_VRISE */
+	a_wait_vfall_tmout,	/* A_WAIT_VFALL */
+	a_wait_bcon_tmout,	/* A_WAIT_BCON */
+	a_aidl_bdis_tmout,	/* A_AIDL_BDIS */
+	b_ase0_brst_tmout,	/* B_ASE0_BRST */
+	a_bidl_adis_tmout,	/* A_BIDL_ADIS */
+	b_se0_srp_tmout,	/* B_SE0_SRP */
+	b_srp_fail_tmout,	/* B_SRP_FAIL */
+	NULL,			/* A_WAIT_ENUM */
+	b_data_pls_tmout,	/* B_DATA_PLS */
+	b_ssend_srp_tmout,	/* B_SSEND_SRP */
+};
+
+/*
+ * Enable the next nearest enabled timer if have
+ */
+static enum hrtimer_restart ci_otg_hrtimer_func(struct hrtimer *t)
+{
+	struct ci_hdrc *ci = container_of(t, struct ci_hdrc, otg_fsm_hrtimer);
+	ktime_t	now, *timeout;
+	unsigned long   enabled_timer_bits;
+	unsigned long   flags;
+	enum otg_fsm_timer cur_timer, next_timer = NUM_OTG_FSM_TIMERS;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&ci->lock, flags);
+	enabled_timer_bits = ci->enabled_otg_timer_bits;
+	ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
+
+	now = ktime_get();
+	for_each_set_bit(cur_timer, &enabled_timer_bits, NUM_OTG_FSM_TIMERS) {
+		if (now.tv64 >= ci->hr_timeouts[cur_timer].tv64) {
+			ci->enabled_otg_timer_bits &= ~(1 << cur_timer);
+			if (otg_timer_handlers[cur_timer])
+				ret = otg_timer_handlers[cur_timer](ci);
+		} else {
+			if ((next_timer == NUM_OTG_FSM_TIMERS) ||
+				(ci->hr_timeouts[cur_timer].tv64 <
+					ci->hr_timeouts[next_timer].tv64))
+				next_timer = cur_timer;
+		}
+	}
+	/* Enable the next nearest timer */
+	if (next_timer < NUM_OTG_FSM_TIMERS) {
+		timeout = &ci->hr_timeouts[next_timer];
+		hrtimer_start_range_ns(&ci->otg_fsm_hrtimer, *timeout,
+					NSEC_PER_MSEC, HRTIMER_MODE_ABS);
+		ci->next_otg_timer = next_timer;
+	}
+	spin_unlock_irqrestore(&ci->lock, flags);
+
+	if (!ret)
+		ci_otg_queue_work(ci);
+
+	return HRTIMER_NORESTART;
 }
 
 /* Initialize timers */
 static int ci_otg_init_timers(struct ci_hdrc *ci)
 {
-	struct otg_fsm *fsm = &ci->fsm;
-
-	/* FSM used timers */
-	ci->fsm_timer->timer_list[A_WAIT_VRISE] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_VRISE,
-			(unsigned long)&fsm->a_wait_vrise_tmout);
-	if (ci->fsm_timer->timer_list[A_WAIT_VRISE] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[A_WAIT_VFALL] =
-		otg_timer_initializer(ci, &a_wait_vfall_tmout_func,
-		TA_WAIT_VFALL, (unsigned long)&fsm->a_wait_vfall_tmout);
-	if (ci->fsm_timer->timer_list[A_WAIT_VFALL] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[A_WAIT_BCON] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TA_WAIT_BCON,
-				(unsigned long)&fsm->a_wait_bcon_tmout);
-	if (ci->fsm_timer->timer_list[A_WAIT_BCON] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[A_AIDL_BDIS] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TA_AIDL_BDIS,
-				(unsigned long)&fsm->a_aidl_bdis_tmout);
-	if (ci->fsm_timer->timer_list[A_AIDL_BDIS] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[A_BIDL_ADIS] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TA_BIDL_ADIS,
-				(unsigned long)&fsm->a_bidl_adis_tmout);
-	if (ci->fsm_timer->timer_list[A_BIDL_ADIS] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_ASE0_BRST] =
-		otg_timer_initializer(ci, &b_ase0_brst_tmout_func, TB_ASE0_BRST,
-					(unsigned long)&fsm->b_ase0_brst_tmout);
-	if (ci->fsm_timer->timer_list[B_ASE0_BRST] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_SE0_SRP] =
-		otg_timer_initializer(ci, &set_tmout_and_fsm, TB_SE0_SRP,
-					(unsigned long)&fsm->b_se0_srp);
-	if (ci->fsm_timer->timer_list[B_SE0_SRP] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_SSEND_SRP] =
-		otg_timer_initializer(ci, &b_ssend_srp_tmout_func, TB_SSEND_SRP,
-					(unsigned long)&fsm->b_ssend_srp);
-	if (ci->fsm_timer->timer_list[B_SSEND_SRP] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_SRP_FAIL] =
-		otg_timer_initializer(ci, &set_tmout, TB_SRP_FAIL,
-				(unsigned long)&fsm->b_srp_done);
-	if (ci->fsm_timer->timer_list[B_SRP_FAIL] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_DATA_PLS] =
-		otg_timer_initializer(ci, &b_data_pulse_end, TB_DATA_PLS, 0);
-	if (ci->fsm_timer->timer_list[B_DATA_PLS] == NULL)
-		return -ENOMEM;
-
-	ci->fsm_timer->timer_list[B_SESS_VLD] =	otg_timer_initializer(ci,
-					&b_sess_vld_tmout_func, TB_SESS_VLD, 0);
-	if (ci->fsm_timer->timer_list[B_SESS_VLD] == NULL)
-		return -ENOMEM;
+	hrtimer_init(&ci->otg_fsm_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	ci->otg_fsm_hrtimer.function = ci_otg_hrtimer_func;
 
 	return 0;
 }
@@ -530,6 +512,7 @@ static void ci_otg_start_pulse(struct otg_fsm *fsm)
 	/* Hardware Assistant Data pulse */
 	hw_write_otgsc(ci, OTGSC_HADP, OTGSC_HADP);
 
+	pm_runtime_get(ci->dev);
 	ci_otg_add_timer(ci, B_DATA_PLS);
 }
 
@@ -585,6 +568,7 @@ int ci_otg_fsm_work(struct ci_hdrc *ci)
 		ci->fsm.otg->state < OTG_STATE_A_IDLE)
 		return 0;
 
+	pm_runtime_get_sync(ci->dev);
 	if (otg_statemachine(&ci->fsm)) {
 		if (ci->fsm.otg->state == OTG_STATE_A_IDLE) {
 			/*
@@ -596,8 +580,15 @@ int ci_otg_fsm_work(struct ci_hdrc *ci)
 			 * a_idle to a_wait_vrise when power up
 			 */
 			if ((ci->fsm.id) || (ci->id_event) ||
-						(ci->fsm.power_up))
+						(ci->fsm.power_up)) {
 				ci_otg_queue_work(ci);
+			} else {
+				/* Enable data pulse irq */
+				hw_write(ci, OP_PORTSC, PORTSC_W1C_BITS |
+								PORTSC_PP, 0);
+				hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS);
+				hw_write_otgsc(ci, OTGSC_DPIE, OTGSC_DPIE);
+			}
 			if (ci->id_event)
 				ci->id_event = false;
 		} else if (ci->fsm.otg->state == OTG_STATE_B_IDLE) {
@@ -609,8 +600,13 @@ int ci_otg_fsm_work(struct ci_hdrc *ci)
 				 */
 				ci_otg_queue_work(ci);
 			}
+		} else if (ci->fsm.otg->state == OTG_STATE_A_HOST) {
+			pm_runtime_mark_last_busy(ci->dev);
+			pm_runtime_put_autosuspend(ci->dev);
+			return 0;
 		}
 	}
+	pm_runtime_put_sync(ci->dev);
 	return 0;
 }
 
@@ -655,7 +651,6 @@ static void ci_otg_fsm_event(struct ci_hdrc *ci)
 			fsm->a_conn = 0;
 			fsm->b_bus_req = 0;
 			ci_otg_queue_work(ci);
-			ci_otg_add_timer(ci, B_SESS_VLD);
 		}
 		break;
 	case OTG_STATE_A_PERIPHERAL:
@@ -725,11 +720,7 @@ irqreturn_t ci_otg_fsm_irq(struct ci_hdrc *ci)
 	fsm->id = (otgsc & OTGSC_ID) ? 1 : 0;
 
 	if (otg_int_src) {
-		if (otg_int_src & OTGSC_1MSIS) {
-			hw_write_otgsc(ci, OTGSC_1MSIS, OTGSC_1MSIS);
-			retval = ci_otg_tick_timer(ci);
-			return IRQ_HANDLED;
-		} else if (otg_int_src & OTGSC_DPIS) {
+		if (otg_int_src & OTGSC_DPIS) {
 			hw_write_otgsc(ci, OTGSC_DPIS, OTGSC_DPIS);
 			fsm->a_srp_det = 1;
 			fsm->a_bus_drop = 0;
@@ -793,17 +784,13 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
 
 	mutex_init(&ci->fsm.lock);
 
-	ci->fsm_timer = devm_kzalloc(ci->dev,
-			sizeof(struct ci_otg_fsm_timer_list), GFP_KERNEL);
-	if (!ci->fsm_timer)
-		return -ENOMEM;
-
-	INIT_LIST_HEAD(&ci->fsm_timer->active_timers);
 	retval = ci_otg_init_timers(ci);
 	if (retval) {
 		dev_err(ci->dev, "Couldn't init OTG timers\n");
 		return retval;
 	}
+	ci->enabled_otg_timer_bits = 0;
+	ci->next_otg_timer = NUM_OTG_FSM_TIMERS;
 
 	retval = sysfs_create_group(&ci->dev->kobj, &inputs_attr_group);
 	if (retval < 0) {
diff --git a/drivers/usb/chipidea/otg_fsm.h b/drivers/usb/chipidea/otg_fsm.h
index 94c085f456a9..2689375ae5da 100644
--- a/drivers/usb/chipidea/otg_fsm.h
+++ b/drivers/usb/chipidea/otg_fsm.h
@@ -62,33 +62,6 @@
 /* SSEND time before SRP */
 #define TB_SSEND_SRP         (1500)	/* minimum 1.5 sec, section:5.1.2 */
 
-#define TB_SESS_VLD          (1000)
-
-enum ci_otg_fsm_timer_index {
-	/*
-	 * CI specific timers, start from the end
-	 * of standard and auxiliary OTG timers
-	 */
-	B_DATA_PLS = NUM_OTG_FSM_TIMERS,
-	B_SSEND_SRP,
-	B_SESS_VLD,
-
-	NUM_CI_OTG_FSM_TIMERS,
-};
-
-struct ci_otg_fsm_timer {
-	unsigned long expires;  /* Number of count increase to timeout */
-	unsigned long count;    /* Tick counter */
-	void (*function)(void *, unsigned long);        /* Timeout function */
-	unsigned long data;     /* Data passed to function */
-	struct list_head list;
-};
-
-struct ci_otg_fsm_timer_list {
-	struct ci_otg_fsm_timer *timer_list[NUM_CI_OTG_FSM_TIMERS];
-	struct list_head active_timers;
-};
-
 #ifdef CONFIG_USB_OTG_FSM
 
 int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci);
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 4bfb7ac0239f..764f668d45a9 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -86,10 +86,8 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma)
 		/* interrupt, error, port change, reset, sleep/suspend */
 		hw_write(ci, OP_USBINTR, ~0,
 			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
-		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	} else {
 		hw_write(ci, OP_USBINTR, ~0, 0);
-		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 	}
 	return 0;
 }
@@ -522,6 +520,20 @@ static void free_pending_td(struct ci_hw_ep *hwep)
 	kfree(pending);
 }
 
+static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
+					   struct td_node *node)
+{
+	hwep->qh.ptr->td.next = node->dma;
+	hwep->qh.ptr->td.token &=
+		cpu_to_le32(~(TD_STATUS_HALTED | TD_STATUS_ACTIVE));
+
+	/* Synchronize before ep prime */
+	wmb();
+
+	return hw_ep_prime(ci, hwep->num, hwep->dir,
+				hwep->type == USB_ENDPOINT_XFER_CONTROL);
+}
+
 /**
  * _hardware_dequeue: handles a request at hardware level
  * @gadget: gadget
@@ -535,6 +547,7 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 	struct td_node *node, *tmpnode;
 	unsigned remaining_length;
 	unsigned actual = hwreq->req.length;
+	struct ci_hdrc *ci = hwep->ci;
 
 	if (hwreq->req.status != -EALREADY)
 		return -EINVAL;
@@ -544,6 +557,11 @@ static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 		tmptoken = le32_to_cpu(node->ptr->token);
 		if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
+			int n = hw_ep_bit(hwep->num, hwep->dir);
+
+			if (ci->rev == CI_REVISION_24)
+				if (!hw_read(ci, OP_ENDPTSTAT, BIT(n)))
+					reprime_dtd(ci, hwep, node);
 			hwreq->req.status = -EALREADY;
 			return -EBUSY;
 		}
@@ -1162,10 +1180,13 @@ static int ep_enable(struct usb_ep *ep,
 
 	/* only internal SW should enable ctrl endpts */
 
-	hwep->ep.desc = desc;
-
-	if (!list_empty(&hwep->qh.queue))
+	if (!list_empty(&hwep->qh.queue)) {
 		dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return -EBUSY;
+	}
+
+	hwep->ep.desc = desc;
 
 	hwep->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
 	hwep->num  = usb_endpoint_num(desc);
@@ -1485,7 +1506,9 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 			hw_device_reset(ci);
 			hw_device_state(ci, ci->ep0out->qh.dma);
 			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+			usb_udc_vbus_handler(_gadget, true);
 		} else {
+			usb_udc_vbus_handler(_gadget, false);
 			if (ci->driver)
 				ci->driver->disconnect(&ci->gadget);
 			hw_device_state(ci, 0);
@@ -1551,13 +1574,16 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 
-	if (!ci->vbus_active)
-		return -EOPNOTSUPP;
+	/* Data+ pullup controlled by OTG state machine in OTG fsm mode */
+	if (ci_otg_is_fsm_mode(ci))
+		return 0;
 
+	pm_runtime_get_sync(&ci->gadget.dev);
 	if (is_on)
 		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	else
 		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+	pm_runtime_put_sync(&ci->gadget.dev);
 
 	return 0;
 }
@@ -1687,6 +1713,7 @@ static int ci_udc_start(struct usb_gadget *gadget,
 		spin_lock_irqsave(&ci->lock, flags);
 		hw_device_reset(ci);
 	} else {
+		usb_udc_vbus_handler(&ci->gadget, false);
 		pm_runtime_put_sync(&ci->gadget.dev);
 		return retval;
 	}
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index c3c6225b8acf..140945cb124f 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -11,7 +11,6 @@
 
 #include <linux/module.h>
 #include <linux/of_platform.h>
-#include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/delay.h>
@@ -56,6 +55,19 @@
 #define MX53_USB_PLL_DIV_24_MHZ		0x01
 
 #define MX6_BM_OVER_CUR_DIS		BIT(7)
+#define MX6_BM_WAKEUP_ENABLE		BIT(10)
+#define MX6_BM_ID_WAKEUP		BIT(16)
+#define MX6_BM_VBUS_WAKEUP		BIT(17)
+#define MX6SX_BM_DPDM_WAKEUP_EN		BIT(29)
+#define MX6_BM_WAKEUP_INTR		BIT(31)
+#define MX6_USB_OTG1_PHY_CTRL		0x18
+/* For imx6dql, it is host-only controller, for later imx6, it is otg's */
+#define MX6_USB_OTG2_PHY_CTRL		0x1c
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v)	(v << 8)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS	MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID	MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID	MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
 
 #define VF610_OVER_CUR_DIS		BIT(7)
 
@@ -64,12 +76,13 @@ struct usbmisc_ops {
 	int (*init)(struct imx_usbmisc_data *data);
 	/* It's called once after adding a usb device */
 	int (*post)(struct imx_usbmisc_data *data);
+	/* It's called when we need to enable/disable usb wakeup */
+	int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
 };
 
 struct imx_usbmisc {
 	void __iomem *base;
 	spinlock_t lock;
-	struct clk *clk;
 	const struct usbmisc_ops *ops;
 };
 
@@ -204,6 +217,35 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 	return 0;
 }
 
+static int usbmisc_imx6q_set_wakeup
+	(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+	u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
+		MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
+	int ret = 0;
+
+	if (data->index > 3)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base + data->index * 4);
+	if (enabled) {
+		val |= wakeup_setting;
+		writel(val, usbmisc->base + data->index * 4);
+	} else {
+		if (val & MX6_BM_WAKEUP_INTR)
+			pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
+		val &= ~wakeup_setting;
+		writel(val, usbmisc->base + data->index * 4);
+	}
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return ret;
+}
+
 static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 {
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -221,6 +263,36 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 		spin_unlock_irqrestore(&usbmisc->lock, flags);
 	}
 
+	usbmisc_imx6q_set_wakeup(data, false);
+
+	return 0;
+}
+
+static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
+{
+	void __iomem *reg = NULL;
+	unsigned long flags;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	u32 val;
+
+	usbmisc_imx6q_init(data);
+
+	if (data->index == 0 || data->index == 1) {
+		reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4;
+		spin_lock_irqsave(&usbmisc->lock, flags);
+		/* Set vbus wakeup source as bvalid */
+		val = readl(reg);
+		writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
+		/*
+		 * Disable dp/dm wakeup in device mode when vbus is
+		 * not there.
+		 */
+		val = readl(usbmisc->base + data->index * 4);
+		writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN,
+			usbmisc->base + data->index * 4);
+		spin_unlock_irqrestore(&usbmisc->lock, flags);
+	}
+
 	return 0;
 }
 
@@ -258,6 +330,7 @@ static const struct usbmisc_ops imx53_usbmisc_ops = {
 };
 
 static const struct usbmisc_ops imx6q_usbmisc_ops = {
+	.set_wakeup = usbmisc_imx6q_set_wakeup,
 	.init = usbmisc_imx6q_init,
 };
 
@@ -265,10 +338,19 @@ static const struct usbmisc_ops vf610_usbmisc_ops = {
 	.init = usbmisc_vf610_init,
 };
 
+static const struct usbmisc_ops imx6sx_usbmisc_ops = {
+	.set_wakeup = usbmisc_imx6q_set_wakeup,
+	.init = usbmisc_imx6sx_init,
+};
+
 int imx_usbmisc_init(struct imx_usbmisc_data *data)
 {
-	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
 
+	usbmisc = dev_get_drvdata(data->dev);
 	if (!usbmisc->ops->init)
 		return 0;
 	return usbmisc->ops->init(data);
@@ -277,14 +359,32 @@ EXPORT_SYMBOL_GPL(imx_usbmisc_init);
 
 int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
 {
-	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	struct imx_usbmisc *usbmisc;
 
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
 	if (!usbmisc->ops->post)
 		return 0;
 	return usbmisc->ops->post(data);
 }
 EXPORT_SYMBOL_GPL(imx_usbmisc_init_post);
 
+int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc;
+
+	if (!data)
+		return 0;
+
+	usbmisc = dev_get_drvdata(data->dev);
+	if (!usbmisc->ops->set_wakeup)
+		return 0;
+	return usbmisc->ops->set_wakeup(data, enabled);
+}
+EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup);
+
 static const struct of_device_id usbmisc_imx_dt_ids[] = {
 	{
 		.compatible = "fsl,imx25-usbmisc",
@@ -314,6 +414,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "fsl,vf610-usbmisc",
 		.data = &vf610_usbmisc_ops,
 	},
+	{
+		.compatible = "fsl,imx6sx-usbmisc",
+		.data = &imx6sx_usbmisc_ops,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
@@ -322,7 +426,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
 {
 	struct resource	*res;
 	struct imx_usbmisc *data;
-	int ret;
 	struct of_device_id *tmp_dev;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
@@ -336,20 +439,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
 	if (IS_ERR(data->base))
 		return PTR_ERR(data->base);
 
-	data->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(data->clk)) {
-		dev_err(&pdev->dev,
-			"failed to get clock, err=%ld\n", PTR_ERR(data->clk));
-		return PTR_ERR(data->clk);
-	}
-
-	ret = clk_prepare_enable(data->clk);
-	if (ret) {
-		dev_err(&pdev->dev,
-			"clk_prepare_enable failed, err=%d\n", ret);
-		return ret;
-	}
-
 	tmp_dev = (struct of_device_id *)
 		of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
 	data->ops = (const struct usbmisc_ops *)tmp_dev->data;
@@ -360,8 +449,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
 
 static int usbmisc_imx_remove(struct platform_device *pdev)
 {
-	struct imx_usbmisc *usbmisc = dev_get_drvdata(&pdev->dev);
-	clk_disable_unprepare(usbmisc->clk);
 	return 0;
 }
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 683617714e7c..3e15add665e2 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -360,7 +360,7 @@ static void acm_ctrl_irq(struct urb *urb)
 	}
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval)
+	if (retval && retval != -EPERM)
 		dev_err(&acm->control->dev, "%s - usb_submit_urb failed: %d\n",
 							__func__, retval);
 }
@@ -417,25 +417,33 @@ static void acm_read_bulk_callback(struct urb *urb)
 	struct acm_rb *rb = urb->context;
 	struct acm *acm = rb->instance;
 	unsigned long flags;
+	int status = urb->status;
 
 	dev_vdbg(&acm->data->dev, "%s - urb %d, len %d\n", __func__,
 					rb->index, urb->actual_length);
-	set_bit(rb->index, &acm->read_urbs_free);
 
 	if (!acm->dev) {
+		set_bit(rb->index, &acm->read_urbs_free);
 		dev_dbg(&acm->data->dev, "%s - disconnected\n", __func__);
 		return;
 	}
 
-	if (urb->status) {
+	if (status) {
+		set_bit(rb->index, &acm->read_urbs_free);
 		dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n",
-							__func__, urb->status);
+							__func__, status);
 		return;
 	}
 
 	usb_mark_last_busy(acm->dev);
 
 	acm_process_read_urb(acm, urb);
+	/*
+	 * Unthrottle may run on another CPU which needs to see events
+	 * in the same order. Submission has an implict barrier
+	 */
+	smp_mb__before_atomic();
+	set_bit(rb->index, &acm->read_urbs_free);
 
 	/* throttle device if requested by tty */
 	spin_lock_irqsave(&acm->read_lock, flags);
@@ -454,13 +462,14 @@ static void acm_write_bulk(struct urb *urb)
 	struct acm_wb *wb = urb->context;
 	struct acm *acm = wb->instance;
 	unsigned long flags;
+	int status = urb->status;
 
-	if (urb->status	|| (urb->actual_length != urb->transfer_buffer_length))
+	if (status || (urb->actual_length != urb->transfer_buffer_length))
 		dev_vdbg(&acm->data->dev, "%s - len %d/%d, status %d\n",
 			__func__,
 			urb->actual_length,
 			urb->transfer_buffer_length,
-			urb->status);
+			status);
 
 	spin_lock_irqsave(&acm->write_lock, flags);
 	acm_write_done(acm, wb);
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index a051a7a2b1bd..61ea87917433 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -245,7 +245,7 @@ static void wdm_int_callback(struct urb *urb)
 	case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
 		dev_dbg(&desc->intf->dev,
 			"NOTIFY_RESPONSE_AVAILABLE received: index %d len %d",
-			dr->wIndex, dr->wLength);
+			le16_to_cpu(dr->wIndex), le16_to_cpu(dr->wLength));
 		break;
 
 	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
@@ -262,7 +262,9 @@ static void wdm_int_callback(struct urb *urb)
 		clear_bit(WDM_POLL_RUNNING, &desc->flags);
 		dev_err(&desc->intf->dev,
 			"unknown notification %d received: index %d len %d\n",
-			dr->bNotificationType, dr->wIndex, dr->wLength);
+			dr->bNotificationType,
+			le16_to_cpu(dr->wIndex),
+			le16_to_cpu(dr->wLength));
 		goto exit;
 	}
 
@@ -339,7 +341,7 @@ static ssize_t wdm_write
 	desc->werr = 0;
 	spin_unlock_irq(&desc->iuspin);
 	if (we < 0)
-		return -EIO;
+		return usb_translate_errors(we);
 
 	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf) {
@@ -349,30 +351,25 @@ static ssize_t wdm_write
 
 	r = copy_from_user(buf, buffer, count);
 	if (r > 0) {
-		kfree(buf);
 		rv = -EFAULT;
-		goto outnl;
+		goto out_free_mem;
 	}
 
 	/* concurrent writes and disconnect */
 	r = mutex_lock_interruptible(&desc->wlock);
 	rv = -ERESTARTSYS;
-	if (r) {
-		kfree(buf);
-		goto outnl;
-	}
+	if (r)
+		goto out_free_mem;
 
 	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
-		kfree(buf);
 		rv = -ENODEV;
-		goto outnp;
+		goto out_free_mem_lock;
 	}
 
 	r = usb_autopm_get_interface(desc->intf);
 	if (r < 0) {
-		kfree(buf);
 		rv = usb_translate_errors(r);
-		goto outnp;
+		goto out_free_mem_lock;
 	}
 
 	if (!(file->f_flags & O_NONBLOCK))
@@ -386,9 +383,8 @@ static ssize_t wdm_write
 		r = -EIO;
 
 	if (r < 0) {
-		kfree(buf);
 		rv = r;
-		goto out;
+		goto out_free_mem_pm;
 	}
 
 	req = desc->orq;
@@ -408,28 +404,35 @@ static ssize_t wdm_write
 			     USB_RECIP_INTERFACE);
 	req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
 	req->wValue = 0;
-	req->wIndex = desc->inum;
+	req->wIndex = desc->inum; /* already converted */
 	req->wLength = cpu_to_le16(count);
 	set_bit(WDM_IN_USE, &desc->flags);
 	desc->outbuf = buf;
 
 	rv = usb_submit_urb(desc->command, GFP_KERNEL);
 	if (rv < 0) {
-		kfree(buf);
 		desc->outbuf = NULL;
 		clear_bit(WDM_IN_USE, &desc->flags);
 		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
 		rv = usb_translate_errors(rv);
+		goto out_free_mem_pm;
 	} else {
 		dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
-			req->wIndex);
+			le16_to_cpu(req->wIndex));
 	}
-out:
+
 	usb_autopm_put_interface(desc->intf);
-outnp:
 	mutex_unlock(&desc->wlock);
 outnl:
 	return rv < 0 ? rv : count;
+
+out_free_mem_pm:
+	usb_autopm_put_interface(desc->intf);
+out_free_mem_lock:
+	mutex_unlock(&desc->wlock);
+out_free_mem:
+	kfree(buf);
+	return rv;
 }
 
 /*
@@ -519,9 +522,9 @@ retry:
 		spin_lock_irq(&desc->iuspin);
 
 		if (desc->rerr) { /* read completed, error happened */
+			rv = usb_translate_errors(desc->rerr);
 			desc->rerr = 0;
 			spin_unlock_irq(&desc->iuspin);
-			rv = -EIO;
 			goto err;
 		}
 		/*
@@ -820,7 +823,7 @@ static int wdm_create(struct usb_interface *intf, struct usb_endpoint_descriptor
 	desc->irq->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
 	desc->irq->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
 	desc->irq->wValue = 0;
-	desc->irq->wIndex = desc->inum;
+	desc->irq->wIndex = desc->inum; /* already converted */
 	desc->irq->wLength = cpu_to_le16(desc->wMaxCommand);
 
 	usb_fill_control_urb(
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 11635537c052..4b0448c26810 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -2408,7 +2408,7 @@ static int usbdev_notify(struct notifier_block *self,
 }
 
 static struct notifier_block usbdev_nb = {
-	.notifier_call = 	usbdev_notify,
+	.notifier_call =	usbdev_notify,
 };
 
 static struct cdev usb_device_cdev;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d7c3d5a35946..3b7151687776 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3406,10 +3406,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 	if (status) {
 		dev_dbg(&port_dev->dev, "can't resume, status %d\n", status);
 	} else {
-		/* drive resume for at least 20 msec */
+		/* drive resume for USB_RESUME_TIMEOUT msec */
 		dev_dbg(&udev->dev, "usb %sresume\n",
 				(PMSG_IS_AUTO(msg) ? "auto-" : ""));
-		msleep(25);
+		msleep(USB_RESUME_TIMEOUT);
 
 		/* Virtual root hubs can trigger on GET_PORT_STATUS to
 		 * stop resume signaling.  Then finish the resume
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index b1fb9aef0f5b..8d5b2f4113cd 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -49,6 +49,22 @@ const char *usbcore_name = "usbcore";
 
 static bool nousb;	/* Disable USB when built into kernel image */
 
+/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */
+#ifdef MODULE
+module_param(nousb, bool, 0444);
+#else
+core_param(nousb, nousb, bool, 0444);
+#endif
+
+/*
+ * for external read access to <nousb>
+ */
+int usb_disabled(void)
+{
+	return nousb;
+}
+EXPORT_SYMBOL_GPL(usb_disabled);
+
 #ifdef	CONFIG_PM
 static int usb_autosuspend_delay = 2;		/* Default delay value,
 						 * in seconds */
@@ -964,22 +980,6 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
 EXPORT_SYMBOL_GPL(usb_buffer_unmap_sg);
 #endif
 
-/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */
-#ifdef MODULE
-module_param(nousb, bool, 0444);
-#else
-core_param(nousb, nousb, bool, 0444);
-#endif
-
-/*
- * for external read access to <nousb>
- */
-int usb_disabled(void)
-{
-	return nousb;
-}
-EXPORT_SYMBOL_GPL(usb_disabled);
-
 /*
  * Notifications of device and interface registration
  */
@@ -1045,7 +1045,7 @@ static void usb_debugfs_cleanup(void)
 static int __init usb_init(void)
 {
 	int retval;
-	if (nousb) {
+	if (usb_disabled()) {
 		pr_info("%s: USB support disabled\n", usbcore_name);
 		return 0;
 	}
@@ -1102,7 +1102,7 @@ out:
 static void __exit usb_exit(void)
 {
 	/* This will matter if shutdown/reboot does exitcalls. */
-	if (nousb)
+	if (usb_disabled())
 		return;
 
 	usb_deregister_device_driver(&usb_generic_driver);
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index 76b9ba4dc925..1bcb36ae6505 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -59,11 +59,13 @@ config USB_DWC2_PLATFORM
 
 config USB_DWC2_PCI
 	tristate "DWC2 PCI"
-	depends on USB_DWC2_HOST && PCI
-	default USB_DWC2_HOST
+	depends on PCI
+	default n
+	select USB_DWC2_PLATFORM
+	select NOP_USB_XCEIV
 	help
 	  The Designware USB2.0 PCI interface module for controllers
-	  connected to a PCI bus. This is only used for host mode.
+	  connected to a PCI bus.
 
 config USB_DWC2_DEBUG
 	bool "Enable Debugging Messages"
diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile
index 8f752679752a..f07b425eaff3 100644
--- a/drivers/usb/dwc2/Makefile
+++ b/drivers/usb/dwc2/Makefile
@@ -19,10 +19,8 @@ endif
 # mode. The PCI bus interface module will called dwc2_pci.ko and the platform
 # interface module will be called dwc2_platform.ko.
 
-ifneq ($(CONFIG_USB_DWC2_PCI),)
-	obj-$(CONFIG_USB_DWC2)		+= dwc2_pci.o
-	dwc2_pci-y			:= pci.o
-endif
+obj-$(CONFIG_USB_DWC2_PCI)		+= dwc2_pci.o
+dwc2_pci-y				:= pci.o
 
 obj-$(CONFIG_USB_DWC2_PLATFORM)		+= dwc2_platform.o
 dwc2_platform-y				:= platform.o
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index f74304b12652..836c012c7707 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -593,6 +593,8 @@ struct dwc2_hsotg {
 	struct dwc2_core_params *core_params;
 	enum usb_otg_state op_state;
 	enum usb_dr_mode dr_mode;
+	unsigned int hcd_enabled:1;
+	unsigned int gadget_enabled:1;
 
 	struct phy *phy;
 	struct usb_phy *uphy;
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index c78c8740db1d..fbbbac2150a5 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -257,6 +257,14 @@ static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
 		 */
 		channel->qh = NULL;
 	}
+	/* All channels have been freed, mark them available */
+	if (hsotg->core_params->uframe_sched > 0) {
+		hsotg->available_host_channels =
+			hsotg->core_params->host_channels;
+	} else {
+		hsotg->non_periodic_channels = 0;
+		hsotg->periodic_channels = 0;
+	}
 }
 
 /**
@@ -1527,7 +1535,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
 			hprt0 |= HPRT0_RES;
 			writel(hprt0, hsotg->regs + HPRT0);
 			hprt0 &= ~HPRT0_SUSP;
-			usleep_range(100000, 150000);
+			msleep(USB_RESUME_TIMEOUT);
 
 			hprt0 &= ~HPRT0_RES;
 			writel(hprt0, hsotg->regs + HPRT0);
@@ -1608,7 +1616,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
 		dev_dbg(hsotg->dev, "GetHubDescriptor\n");
 		hub_desc = (struct usb_hub_descriptor *)buf;
 		hub_desc->bDescLength = 9;
-		hub_desc->bDescriptorType = 0x29;
+		hub_desc->bDescriptorType = USB_DT_HUB;
 		hub_desc->bNbrPorts = 1;
 		hub_desc->wHubCharacteristics =
 			cpu_to_le16(HUB_CHAR_COMMON_LPSM |
diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c
index a4e724b0a62e..ae419615a176 100644
--- a/drivers/usb/dwc2/pci.c
+++ b/drivers/usb/dwc2/pci.c
@@ -50,113 +50,97 @@
 
 #include <linux/usb/hcd.h>
 #include <linux/usb/ch11.h>
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_generic.h>
 
-#include "core.h"
-#include "hcd.h"
-
-#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
 #define PCI_PRODUCT_ID_HAPS_HSOTG	0xabc0
 
-static const char dwc2_driver_name[] = "dwc2";
-
-static const struct dwc2_core_params dwc2_module_params = {
-	.otg_cap			= -1,
-	.otg_ver			= -1,
-	.dma_enable			= -1,
-	.dma_desc_enable		= 0,
-	.speed				= -1,
-	.enable_dynamic_fifo		= -1,
-	.en_multiple_tx_fifo		= -1,
-	.host_rx_fifo_size		= 1024,
-	.host_nperio_tx_fifo_size	= 256,
-	.host_perio_tx_fifo_size	= 1024,
-	.max_transfer_size		= 65535,
-	.max_packet_count		= 511,
-	.host_channels			= -1,
-	.phy_type			= -1,
-	.phy_utmi_width			= -1,
-	.phy_ulpi_ddr			= -1,
-	.phy_ulpi_ext_vbus		= -1,
-	.i2c_enable			= -1,
-	.ulpi_fs_ls			= -1,
-	.host_support_fs_ls_low_power	= -1,
-	.host_ls_low_power_phy_clk	= -1,
-	.ts_dline			= -1,
-	.reload_ctl			= -1,
-	.ahbcfg				= -1,
-	.uframe_sched			= -1,
+static const char dwc2_driver_name[] = "dwc2-pci";
+
+struct dwc2_pci_glue {
+	struct platform_device *dwc2;
+	struct platform_device *phy;
 };
 
-/**
- * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
- * DWC_otg driver
- *
- * @dev: Bus device
- *
- * This routine is called, for example, when the rmmod command is executed. The
- * device may or may not be electrically present. If it is present, the driver
- * stops device processing. Any resources used on behalf of this device are
- * freed.
- */
-static void dwc2_driver_remove(struct pci_dev *dev)
+static void dwc2_pci_remove(struct pci_dev *pci)
 {
-	struct dwc2_hsotg *hsotg = pci_get_drvdata(dev);
+	struct dwc2_pci_glue *glue = pci_get_drvdata(pci);
 
-	dwc2_hcd_remove(hsotg);
-	pci_disable_device(dev);
+	platform_device_unregister(glue->dwc2);
+	usb_phy_generic_unregister(glue->phy);
+	kfree(glue);
+	pci_set_drvdata(pci, NULL);
 }
 
-/**
- * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
- * driver
- *
- * @dev: Bus device
- *
- * This routine creates the driver components required to control the device
- * (core, HCD, and PCD) and initializes the device. The driver components are
- * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
- * in the device private data. This allows the driver to access the dwc2_hsotg
- * structure on subsequent calls to driver methods for this device.
- */
-static int dwc2_driver_probe(struct pci_dev *dev,
-			     const struct pci_device_id *id)
+static int dwc2_pci_probe(struct pci_dev *pci,
+		const struct pci_device_id *id)
 {
-	struct dwc2_hsotg *hsotg;
-	int retval;
+	struct resource		res[2];
+	struct platform_device	*dwc2;
+	struct platform_device	*phy;
+	int			ret;
+	struct device		*dev = &pci->dev;
+	struct dwc2_pci_glue	*glue;
+
+	ret = pcim_enable_device(pci);
+	if (ret) {
+		dev_err(dev, "failed to enable pci device\n");
+		return -ENODEV;
+	}
+
+	pci_set_master(pci);
 
-	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
-	if (!hsotg)
+	dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO);
+	if (!dwc2) {
+		dev_err(dev, "couldn't allocate dwc2 device\n");
 		return -ENOMEM;
+	}
 
-	hsotg->dev = &dev->dev;
-	hsotg->regs = devm_ioremap_resource(&dev->dev, &dev->resource[0]);
-	if (IS_ERR(hsotg->regs))
-		return PTR_ERR(hsotg->regs);
+	memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
 
-	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
-		(unsigned long)pci_resource_start(dev, 0), hsotg->regs);
+	res[0].start	= pci_resource_start(pci, 0);
+	res[0].end	= pci_resource_end(pci, 0);
+	res[0].name	= "dwc2";
+	res[0].flags	= IORESOURCE_MEM;
 
-	if (pci_enable_device(dev) < 0)
-		return -ENODEV;
+	res[1].start	= pci->irq;
+	res[1].name	= "dwc2";
+	res[1].flags	= IORESOURCE_IRQ;
 
-	pci_set_master(dev);
+	ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(dev, "couldn't add resources to dwc2 device\n");
+		return ret;
+	}
 
-	retval = devm_request_irq(hsotg->dev, dev->irq,
-				  dwc2_handle_common_intr, IRQF_SHARED,
-				  dev_name(hsotg->dev), hsotg);
-	if (retval)
-		return retval;
+	dwc2->dev.parent = dev;
 
-	spin_lock_init(&hsotg->lock);
-	retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params);
-	if (retval) {
-		pci_disable_device(dev);
-		return retval;
+	phy = usb_phy_generic_register();
+	if (IS_ERR(phy)) {
+		dev_err(dev, "error registering generic PHY (%ld)\n",
+			PTR_ERR(phy));
+		return PTR_ERR(phy);
 	}
 
-	pci_set_drvdata(dev, hsotg);
+	ret = platform_device_add(dwc2);
+	if (ret) {
+		dev_err(dev, "failed to register dwc2 device\n");
+		goto err;
+	}
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	glue->phy = phy;
+	glue->dwc2 = dwc2;
+	pci_set_drvdata(pci, glue);
 
-	return retval;
+	return 0;
+err:
+	usb_phy_generic_unregister(phy);
+	platform_device_put(dwc2);
+	return ret;
 }
 
 static const struct pci_device_id dwc2_pci_ids[] = {
@@ -174,8 +158,8 @@ MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
 static struct pci_driver dwc2_pci_driver = {
 	.name = dwc2_driver_name,
 	.id_table = dwc2_pci_ids,
-	.probe = dwc2_driver_probe,
-	.remove = dwc2_driver_remove,
+	.probe = dwc2_pci_probe,
+	.remove = dwc2_pci_remove,
 };
 
 module_pci_driver(dwc2_pci_driver);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index ae095f009b4f..185663e0b5f4 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -121,8 +121,10 @@ static int dwc2_driver_remove(struct platform_device *dev)
 {
 	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
 
-	dwc2_hcd_remove(hsotg);
-	s3c_hsotg_remove(hsotg);
+	if (hsotg->hcd_enabled)
+		dwc2_hcd_remove(hsotg);
+	if (hsotg->gadget_enabled)
+		s3c_hsotg_remove(hsotg);
 
 	return 0;
 }
@@ -234,12 +236,23 @@ static int dwc2_driver_probe(struct platform_device *dev)
 
 	spin_lock_init(&hsotg->lock);
 	mutex_init(&hsotg->init_mutex);
-	retval = dwc2_gadget_init(hsotg, irq);
-	if (retval)
-		return retval;
-	retval = dwc2_hcd_init(hsotg, irq, params);
-	if (retval)
-		return retval;
+
+	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
+		retval = dwc2_gadget_init(hsotg, irq);
+		if (retval)
+			return retval;
+		hsotg->gadget_enabled = 1;
+	}
+
+	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
+		retval = dwc2_hcd_init(hsotg, irq, params);
+		if (retval) {
+			if (hsotg->gadget_enabled)
+				s3c_hsotg_remove(hsotg);
+			return retval;
+		}
+		hsotg->hcd_enabled = 1;
+	}
 
 	platform_set_drvdata(dev, hsotg);
 
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index edbf9c85af7e..827c4f80379f 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -104,11 +104,4 @@ config USB_DWC3_DEBUG
 	help
 	  Say Y here to enable debugging messages on DWC3 Driver.
 
-config DWC3_HOST_USB3_LPM_ENABLE
-	bool "Enable USB3 LPM Capability"
-	depends on USB_DWC3_HOST=y || USB_DWC3_DUAL_ROLE=y
-	default n
-	help
-	  Select this when you want to enable USB3 LPM with dwc3 xhci host.
-
 endif
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9f0e209b8f6c..2bbab3d86fff 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -774,17 +774,13 @@ static int dwc3_probe(struct platform_device *pdev)
 	 * since it will be requested by the xhci-plat driver.
 	 */
 	regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(regs))
-		return PTR_ERR(regs);
+	if (IS_ERR(regs)) {
+		ret = PTR_ERR(regs);
+		goto err0;
+	}
 
 	dwc->regs	= regs;
 	dwc->regs_size	= resource_size(res);
-	/*
-	 * restore res->start back to its original value so that,
-	 * in case the probe is deferred, we don't end up getting error in
-	 * request the memory region the next time probe is called.
-	 */
-	res->start -= DWC3_GLOBALS_REGS_START;
 
 	/* default to highest possible threshold */
 	lpm_nyet_threshold = 0xff;
@@ -808,6 +804,8 @@ static int dwc3_probe(struct platform_device *pdev)
 				"snps,is-utmi-l1-suspend");
 		of_property_read_u8(node, "snps,hird-threshold",
 				&hird_threshold);
+		dwc->usb3_lpm_capable = of_property_read_bool(node,
+				"snps,usb3_lpm_capable");
 
 		dwc->needs_fifo_resize = of_property_read_bool(node,
 				"tx-fifo-resize");
@@ -848,6 +846,7 @@ static int dwc3_probe(struct platform_device *pdev)
 			hird_threshold = pdata->hird_threshold;
 
 		dwc->needs_fifo_resize = pdata->tx_fifo_resize;
+		dwc->usb3_lpm_capable = pdata->usb3_lpm_capable;
 		dwc->dr_mode = pdata->dr_mode;
 
 		dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
@@ -878,7 +877,7 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	ret = dwc3_core_get_phy(dwc);
 	if (ret)
-		return ret;
+		goto err0;
 
 	spin_lock_init(&dwc->lock);
 	platform_set_drvdata(pdev, dwc);
@@ -899,7 +898,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(dwc->dev, "failed to allocate event buffers\n");
 		ret = -ENOMEM;
-		goto err0;
+		goto err1;
 	}
 
 	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
@@ -913,65 +912,81 @@ static int dwc3_probe(struct platform_device *pdev)
 	ret = dwc3_core_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize core\n");
-		goto err0;
+		goto err1;
 	}
 
 	usb_phy_set_suspend(dwc->usb2_phy, 0);
 	usb_phy_set_suspend(dwc->usb3_phy, 0);
 	ret = phy_power_on(dwc->usb2_generic_phy);
 	if (ret < 0)
-		goto err1;
+		goto err2;
 
 	ret = phy_power_on(dwc->usb3_generic_phy);
 	if (ret < 0)
-		goto err_usb2phy_power;
+		goto err3;
 
 	ret = dwc3_event_buffers_setup(dwc);
 	if (ret) {
 		dev_err(dwc->dev, "failed to setup event buffers\n");
-		goto err_usb3phy_power;
+		goto err4;
 	}
 
 	ret = dwc3_core_init_mode(dwc);
 	if (ret)
-		goto err2;
+		goto err5;
 
 	ret = dwc3_debugfs_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize debugfs\n");
-		goto err3;
+		goto err6;
 	}
 
 	pm_runtime_allow(dev);
 
 	return 0;
 
-err3:
+err6:
 	dwc3_core_exit_mode(dwc);
 
-err2:
+err5:
 	dwc3_event_buffers_cleanup(dwc);
 
-err_usb3phy_power:
+err4:
 	phy_power_off(dwc->usb3_generic_phy);
 
-err_usb2phy_power:
+err3:
 	phy_power_off(dwc->usb2_generic_phy);
 
-err1:
+err2:
 	usb_phy_set_suspend(dwc->usb2_phy, 1);
 	usb_phy_set_suspend(dwc->usb3_phy, 1);
 	dwc3_core_exit(dwc);
 
-err0:
+err1:
 	dwc3_free_event_buffers(dwc);
 
+err0:
+	/*
+	 * restore res->start back to its original value so that, in case the
+	 * probe is deferred, we don't end up getting error in request the
+	 * memory region the next time probe is called.
+	 */
+	res->start -= DWC3_GLOBALS_REGS_START;
+
 	return ret;
 }
 
 static int dwc3_remove(struct platform_device *pdev)
 {
 	struct dwc3	*dwc = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	/*
+	 * restore res->start back to its original value so that, in case the
+	 * probe is deferred, we don't end up getting error in request the
+	 * memory region the next time probe is called.
+	 */
+	res->start -= DWC3_GLOBALS_REGS_START;
 
 	dwc3_debugfs_exit(dwc);
 	dwc3_core_exit_mode(dwc);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index d201910b892f..fdab715a0631 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -689,6 +689,7 @@ struct dwc3_scratchpad_array {
  * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
  * @start_config_issued: true when StartConfig command has been issued
  * @three_stage_setup: set if we perform a three phase setup
+ * @usb3_lpm_capable: set if hadrware supports Link Power Management
  * @disable_scramble_quirk: set if we enable the disable scramble quirk
  * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
  * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
@@ -812,6 +813,7 @@ struct dwc3 {
 	unsigned		setup_packet_pending:1;
 	unsigned		start_config_issued:1;
 	unsigned		three_stage_setup:1;
+	unsigned		usb3_lpm_capable:1;
 
 	unsigned		disable_scramble_quirk:1;
 	unsigned		u2exit_lfps_quirk:1;
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 52e0c4e5e48e..edba5348be18 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -325,15 +325,6 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 	return IRQ_HANDLED;
 }
 
-static int dwc3_omap_remove_core(struct device *dev, void *c)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	of_device_unregister(pdev);
-
-	return 0;
-}
-
 static void dwc3_omap_enable_irqs(struct dwc3_omap *omap)
 {
 	u32			reg;
@@ -600,7 +591,7 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 	if (omap->extcon_id_dev.edev)
 		extcon_unregister_interest(&omap->extcon_id_dev);
 	dwc3_omap_disable_irqs(omap);
-	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);
+	of_platform_depopulate(omap->dev);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 8d950569d557..b773fb53d6a7 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -24,8 +24,6 @@
 
 #include "platform_data.h"
 
-/* FIXME define these in <linux/pci_ids.h> */
-#define PCI_VENDOR_ID_SYNOPSYS		0x16c3
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3	0xabcd
 #define PCI_DEVICE_ID_INTEL_BYT		0x0f37
 #define PCI_DEVICE_ID_INTEL_MRFLD	0x119e
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a03a485205c7..8946c32047e9 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1855,32 +1855,27 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	unsigned int		i;
 	int			ret;
 
+	req = next_request(&dep->req_queued);
+	if (!req) {
+		WARN_ON_ONCE(1);
+		return 1;
+	}
+	i = 0;
 	do {
-		req = next_request(&dep->req_queued);
-		if (!req) {
-			WARN_ON_ONCE(1);
-			return 1;
-		}
-		i = 0;
-		do {
-			slot = req->start_slot + i;
-			if ((slot == DWC3_TRB_NUM - 1) &&
+		slot = req->start_slot + i;
+		if ((slot == DWC3_TRB_NUM - 1) &&
 				usb_endpoint_xfer_isoc(dep->endpoint.desc))
-				slot++;
-			slot %= DWC3_TRB_NUM;
-			trb = &dep->trb_pool[slot];
-
-			ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
-					event, status);
-			if (ret)
-				break;
-		}while (++i < req->request.num_mapped_sgs);
-
-		dwc3_gadget_giveback(dep, req, status);
+			slot++;
+		slot %= DWC3_TRB_NUM;
+		trb = &dep->trb_pool[slot];
 
+		ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
+				event, status);
 		if (ret)
 			break;
-	} while (1);
+	} while (++i < req->request.num_mapped_sgs);
+
+	dwc3_gadget_giveback(dep, req, status);
 
 	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
 			list_empty(&dep->req_queued)) {
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index 12bfd3c5405e..c679f63783ae 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -49,9 +49,7 @@ int dwc3_host_init(struct dwc3 *dwc)
 
 	memset(&pdata, 0, sizeof(pdata));
 
-#ifdef CONFIG_DWC3_HOST_USB3_LPM_ENABLE
-	pdata.usb3_lpm_capable = 1;
-#endif
+	pdata.usb3_lpm_capable = dwc->usb3_lpm_capable;
 
 	ret = platform_device_add_data(xhci, &pdata, sizeof(pdata));
 	if (ret) {
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index a3a3b6d5668c..a2bd464be828 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -24,6 +24,7 @@ struct dwc3_platform_data {
 	enum usb_device_speed maximum_speed;
 	enum usb_dr_mode dr_mode;
 	bool tx_fifo_resize;
+	bool usb3_lpm_capable;
 
 	unsigned is_utmi_l1_suspend:1;
 	u8 hird_threshold;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b454d05be583..bcf83c0a6e62 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -196,6 +196,9 @@ config USB_F_MIDI
 config USB_F_HID
 	tristate
 
+config USB_F_PRINTER
+	tristate
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
@@ -434,6 +437,20 @@ config USB_CONFIGFS_F_UVC
 	  device. It provides a userspace API to process UVC control requests
 	  and stream video data to the host.
 
+config USB_CONFIGFS_F_PRINTER
+	bool "Printer function"
+	select USB_F_PRINTER
+	depends on USB_CONFIGFS
+	help
+	  The Printer function channels data between the USB host and a
+	  userspace program driving the print engine. The user space
+	  program reads and writes the device file /dev/g_printer<X> to
+	  receive or send printer data. It can use ioctl calls to
+	  the device file to get or set printer status.
+
+	  For more information, see Documentation/usb/gadget_printer.txt
+	  which includes sample code for accessing the device file.
+
 source "drivers/usb/gadget/legacy/Kconfig"
 
 endchoice
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 13adfd1a3f54..4e3447bbd097 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1161,11 +1161,11 @@ static struct usb_gadget_string_container *copy_gadget_strings(
  * This function will create a deep copy of usb_gadget_strings and usb_string
  * and attach it to the cdev. The actual string (usb_string.s) will not be
  * copied but only a referenced will be made. The struct usb_gadget_strings
- * array may contain multiple languges and should be NULL terminated.
+ * array may contain multiple languages and should be NULL terminated.
  * The ->language pointer of each struct usb_gadget_strings has to contain the
  * same amount of entries.
  * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first
- * usb_string entry of es-ES containts the translation of the first usb_string
+ * usb_string entry of es-ES contains the translation of the first usb_string
  * entry of en-US. Therefore both entries become the same id assign.
  */
 struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
@@ -1472,6 +1472,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 	req->length = 0;
 	gadget->ep0->driver_data = cdev;
 
+	/*
+	 * Don't let non-standard requests match any of the cases below
+	 * by accident.
+	 */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
+		goto unknown;
+
 	switch (ctrl->bRequest) {
 
 	/* we handle all standard USB descriptors */
@@ -1751,6 +1758,10 @@ unknown:
 		 * take such requests too, if that's ever needed:  to work
 		 * in config 0, etc.
 		 */
+		list_for_each_entry(f, &cdev->config->functions, list)
+			if (f->req_match && f->req_match(f, ctrl))
+				goto try_fun_setup;
+		f = NULL;
 		switch (ctrl->bRequestType & USB_RECIP_MASK) {
 		case USB_RECIP_INTERFACE:
 			if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
@@ -1768,7 +1779,7 @@ unknown:
 				f = NULL;
 			break;
 		}
-
+try_fun_setup:
 		if (f && f->setup)
 			value = f->setup(f, ctrl);
 		else {
diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile
index f71b1aaa0edf..bd7def576955 100644
--- a/drivers/usb/gadget/function/Makefile
+++ b/drivers/usb/gadget/function/Makefile
@@ -42,3 +42,5 @@ usb_f_midi-y			:= f_midi.o
 obj-$(CONFIG_USB_F_MIDI)	+= usb_f_midi.o
 usb_f_hid-y			:= f_hid.o
 obj-$(CONFIG_USB_F_HID)		+= usb_f_hid.o
+usb_f_printer-y			:= f_printer.o
+obj-$(CONFIG_USB_F_PRINTER)	+= usb_f_printer.o
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index a2612fb79eff..13dfc9915b1d 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -908,7 +908,6 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f)
 
 	/* disable/free request and end point */
 	usb_ep_disable(hidg->in_ep);
-	usb_ep_dequeue(hidg->in_ep, hidg->req);
 	kfree(hidg->req->buf);
 	usb_ep_free_request(hidg->in_ep, hidg->req);
 
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index 811929cd4c9e..3cc109f3c9c8 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -1085,7 +1085,7 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
 	if (!curlun) {		/* Unsupported LUNs are okay */
 		common->bad_lun_okay = 1;
 		memset(buf, 0, 36);
-		buf[0] = 0x7f;		/* Unsupported, no device-type */
+		buf[0] = TYPE_NO_LUN;	/* Unsupported, no device-type */
 		buf[4] = 31;		/* Additional length */
 		return 36;
 	}
@@ -2624,13 +2624,10 @@ static ssize_t file_store(struct device *dev, struct device_attribute *attr,
 	return fsg_store_file(curlun, filesem, buf, count);
 }
 
-static DEVICE_ATTR_RW(ro);
 static DEVICE_ATTR_RW(nofua);
-static DEVICE_ATTR_RW(file);
-
-static struct device_attribute dev_attr_ro_cdrom = __ATTR_RO(ro);
-static struct device_attribute dev_attr_file_nonremovable = __ATTR_RO(file);
-
+/* mode wil be set in fsg_lun_attr_is_visible() */
+static DEVICE_ATTR(ro, 0, ro_show, ro_store);
+static DEVICE_ATTR(file, 0, file_show, file_store);
 
 /****************************** FSG COMMON ******************************/
 
@@ -2745,40 +2742,10 @@ error_release:
 }
 EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers);
 
-static inline void fsg_common_remove_sysfs(struct fsg_lun *lun)
-{
-	device_remove_file(&lun->dev, &dev_attr_nofua);
-	/*
-	 * device_remove_file() =>
-	 *
-	 * here the attr (e.g. dev_attr_ro) is only used to be passed to:
-	 *
-	 *	sysfs_remove_file() =>
-	 *
-	 *	here e.g. both dev_attr_ro_cdrom and dev_attr_ro are in
-	 *	the same namespace and
-	 *	from here only attr->name is passed to:
-	 *
-	 *		sysfs_hash_and_remove()
-	 *
-	 *		attr->name is the same for dev_attr_ro_cdrom and
-	 *		dev_attr_ro
-	 *		attr->name is the same for dev_attr_file and
-	 *		dev_attr_file_nonremovable
-	 *
-	 * so we don't differentiate between removing e.g. dev_attr_ro_cdrom
-	 * and dev_attr_ro
-	 */
-	device_remove_file(&lun->dev, &dev_attr_ro);
-	device_remove_file(&lun->dev, &dev_attr_file);
-}
-
 void fsg_common_remove_lun(struct fsg_lun *lun, bool sysfs)
 {
-	if (sysfs) {
-		fsg_common_remove_sysfs(lun);
+	if (sysfs)
 		device_unregister(&lun->dev);
-	}
 	fsg_lun_close(lun);
 	kfree(lun);
 }
@@ -2877,41 +2844,35 @@ int fsg_common_set_cdev(struct fsg_common *common,
 }
 EXPORT_SYMBOL_GPL(fsg_common_set_cdev);
 
-static inline int fsg_common_add_sysfs(struct fsg_common *common,
-				       struct fsg_lun *lun)
-{
-	int rc;
+static struct attribute *fsg_lun_dev_attrs[] = {
+	&dev_attr_ro.attr,
+	&dev_attr_file.attr,
+	&dev_attr_nofua.attr,
+	NULL
+};
 
-	rc = device_register(&lun->dev);
-	if (rc) {
-		put_device(&lun->dev);
-		return rc;
-	}
+static umode_t fsg_lun_dev_is_visible(struct kobject *kobj,
+				      struct attribute *attr, int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct fsg_lun *lun = fsg_lun_from_dev(dev);
 
-	rc = device_create_file(&lun->dev,
-				lun->cdrom
-			      ? &dev_attr_ro_cdrom
-			      : &dev_attr_ro);
-	if (rc)
-		goto error;
-	rc = device_create_file(&lun->dev,
-				lun->removable
-			      ? &dev_attr_file
-			      : &dev_attr_file_nonremovable);
-	if (rc)
-		goto error;
-	rc = device_create_file(&lun->dev, &dev_attr_nofua);
-	if (rc)
-		goto error;
+	if (attr == &dev_attr_ro.attr)
+		return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO);
+	if (attr == &dev_attr_file.attr)
+		return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO;
+	return attr->mode;
+}
 
-	return 0;
+static const struct attribute_group fsg_lun_dev_group = {
+	.attrs = fsg_lun_dev_attrs,
+	.is_visible = fsg_lun_dev_is_visible,
+};
 
-error:
-	/* removing nonexistent files is a no-op */
-	fsg_common_remove_sysfs(lun);
-	device_unregister(&lun->dev);
-	return rc;
-}
+static const struct attribute_group *fsg_lun_dev_groups[] = {
+	&fsg_lun_dev_group,
+	NULL
+};
 
 int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
 			  unsigned int id, const char *name,
@@ -2949,13 +2910,15 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
 	} else {
 		lun->dev.release = fsg_lun_release;
 		lun->dev.parent = &common->gadget->dev;
+		lun->dev.groups = fsg_lun_dev_groups;
 		dev_set_drvdata(&lun->dev, &common->filesem);
 		dev_set_name(&lun->dev, "%s", name);
 		lun->name = dev_name(&lun->dev);
 
-		rc = fsg_common_add_sysfs(common, lun);
+		rc = device_register(&lun->dev);
 		if (rc) {
 			pr_info("failed to register LUN%d: %d\n", id, rc);
+			put_device(&lun->dev);
 			goto error_sysfs;
 		}
 	}
@@ -2988,10 +2951,8 @@ int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg,
 	return 0;
 
 error_lun:
-	if (common->sysfs) {
-		fsg_common_remove_sysfs(lun);
+	if (common->sysfs)
 		device_unregister(&lun->dev);
-	}
 	fsg_lun_close(lun);
 	common->luns[id] = NULL;
 error_sysfs:
@@ -3077,8 +3038,6 @@ static void fsg_common_release(struct kref *ref)
 			struct fsg_lun *lun = *lun_it;
 			if (!lun)
 				continue;
-			if (common->sysfs)
-				fsg_common_remove_sysfs(lun);
 			fsg_lun_close(lun);
 			if (common->sysfs)
 				device_unregister(&lun->dev);
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
new file mode 100644
index 000000000000..44173df27273
--- /dev/null
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -0,0 +1,1471 @@
+/*
+ * f_printer.c - USB printer function driver
+ *
+ * Copied from drivers/usb/gadget/legacy/printer.c,
+ * which was:
+ *
+ * printer.c -- Printer gadget driver
+ *
+ * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2006 Craig W. Nadler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/idr.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/cdev.h>
+
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/g_printer.h>
+
+#include "u_printer.h"
+
+#define PNP_STRING_LEN		1024
+#define PRINTER_MINORS		4
+#define GET_DEVICE_ID		0
+#define GET_PORT_STATUS		1
+#define SOFT_RESET		2
+
+static int major, minors;
+static struct class *usb_gadget_class;
+static DEFINE_IDA(printer_ida);
+static DEFINE_MUTEX(printer_ida_lock); /* protects access do printer_ida */
+
+/*-------------------------------------------------------------------------*/
+
+struct printer_dev {
+	spinlock_t		lock;		/* lock this structure */
+	/* lock buffer lists during read/write calls */
+	struct mutex		lock_printer_io;
+	struct usb_gadget	*gadget;
+	s8			interface;
+	struct usb_ep		*in_ep, *out_ep;
+
+	struct list_head	rx_reqs;	/* List of free RX structs */
+	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
+	struct list_head	rx_buffers;	/* List of completed xfers */
+	/* wait until there is data to be read. */
+	wait_queue_head_t	rx_wait;
+	struct list_head	tx_reqs;	/* List of free TX structs */
+	struct list_head	tx_reqs_active; /* List of Active TX xfers */
+	/* Wait until there are write buffers available to use. */
+	wait_queue_head_t	tx_wait;
+	/* Wait until all write buffers have been sent. */
+	wait_queue_head_t	tx_flush_wait;
+	struct usb_request	*current_rx_req;
+	size_t			current_rx_bytes;
+	u8			*current_rx_buf;
+	u8			printer_status;
+	u8			reset_printer;
+	int			minor;
+	struct cdev		printer_cdev;
+	u8			printer_cdev_open;
+	wait_queue_head_t	wait;
+	unsigned		q_len;
+	char			*pnp_string;	/* We don't own memory! */
+	struct usb_function	function;
+};
+
+static inline struct printer_dev *func_to_printer(struct usb_function *f)
+{
+	return container_of(f, struct printer_dev, function);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand.
+ */
+
+/* holds our biggest descriptor */
+#define USB_DESC_BUFSIZE		256
+#define USB_BUFSIZE			8192
+
+static struct usb_interface_descriptor intf_desc = {
+	.bLength =		sizeof(intf_desc),
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_PRINTER,
+	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
+	.bInterfaceProtocol =	2,	/* Bi-Directional */
+	.iInterface =		0
+};
+
+static struct usb_endpoint_descriptor fs_ep_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK
+};
+
+static struct usb_endpoint_descriptor fs_ep_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK
+};
+
+static struct usb_descriptor_header *fs_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &fs_ep_in_desc,
+	(struct usb_descriptor_header *) &fs_ep_out_desc,
+	NULL
+};
+
+/*
+ * usb 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ */
+
+static struct usb_endpoint_descriptor hs_ep_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512)
+};
+
+static struct usb_endpoint_descriptor hs_ep_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512)
+};
+
+static struct usb_qualifier_descriptor dev_qualifier = {
+	.bLength =		sizeof(dev_qualifier),
+	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB =		cpu_to_le16(0x0200),
+	.bDeviceClass =		USB_CLASS_PRINTER,
+	.bNumConfigurations =	1
+};
+
+static struct usb_descriptor_header *hs_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &hs_ep_in_desc,
+	(struct usb_descriptor_header *) &hs_ep_out_desc,
+	NULL
+};
+
+/*
+ * Added endpoint descriptors for 3.0 devices
+ */
+
+static struct usb_endpoint_descriptor ss_ep_in_desc = {
+	.bLength =              USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =      USB_DT_ENDPOINT,
+	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = {
+	.bLength =              sizeof(ss_ep_in_comp_desc),
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_endpoint_descriptor ss_ep_out_desc = {
+	.bLength =              USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =      USB_DT_ENDPOINT,
+	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = {
+	.bLength =              sizeof(ss_ep_out_comp_desc),
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *ss_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &ss_ep_in_desc,
+	(struct usb_descriptor_header *) &ss_ep_in_comp_desc,
+	(struct usb_descriptor_header *) &ss_ep_out_desc,
+	(struct usb_descriptor_header *) &ss_ep_out_comp_desc,
+	NULL
+};
+
+/* maxpacket and other transfer characteristics vary by speed. */
+static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
+					struct usb_endpoint_descriptor *fs,
+					struct usb_endpoint_descriptor *hs,
+					struct usb_endpoint_descriptor *ss)
+{
+	switch (gadget->speed) {
+	case USB_SPEED_SUPER:
+		return ss;
+	case USB_SPEED_HIGH:
+		return hs;
+	default:
+		return fs;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
+{
+	struct usb_request	*req;
+
+	req = usb_ep_alloc_request(ep, gfp_flags);
+
+	if (req != NULL) {
+		req->length = len;
+		req->buf = kmalloc(len, gfp_flags);
+		if (req->buf == NULL) {
+			usb_ep_free_request(ep, req);
+			return NULL;
+		}
+	}
+
+	return req;
+}
+
+static void
+printer_req_free(struct usb_ep *ep, struct usb_request *req)
+{
+	if (ep != NULL && req != NULL) {
+		kfree(req->buf);
+		usb_ep_free_request(ep, req);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct printer_dev	*dev = ep->driver_data;
+	int			status = req->status;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	list_del_init(&req->list);	/* Remode from Active List */
+
+	switch (status) {
+
+	/* normal completion */
+	case 0:
+		if (req->actual > 0) {
+			list_add_tail(&req->list, &dev->rx_buffers);
+			DBG(dev, "G_Printer : rx length %d\n", req->actual);
+		} else {
+			list_add(&req->list, &dev->rx_reqs);
+		}
+		break;
+
+	/* software-driven interface shutdown */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		VDBG(dev, "rx shutdown, code %d\n", status);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+
+	/* for hardware automagic (such as pxa) */
+	case -ECONNABORTED:		/* endpoint reset */
+		DBG(dev, "rx %s reset\n", ep->name);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+
+	/* data overrun */
+	case -EOVERFLOW:
+		/* FALLTHROUGH */
+
+	default:
+		DBG(dev, "rx status %d\n", status);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+	}
+
+	wake_up_interruptible(&dev->rx_wait);
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct printer_dev	*dev = ep->driver_data;
+
+	switch (req->status) {
+	default:
+		VDBG(dev, "tx err %d\n", req->status);
+		/* FALLTHROUGH */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		break;
+	case 0:
+		break;
+	}
+
+	spin_lock(&dev->lock);
+	/* Take the request struct off the active list and put it on the
+	 * free list.
+	 */
+	list_del_init(&req->list);
+	list_add(&req->list, &dev->tx_reqs);
+	wake_up_interruptible(&dev->tx_wait);
+	if (likely(list_empty(&dev->tx_reqs_active)))
+		wake_up_interruptible(&dev->tx_flush_wait);
+
+	spin_unlock(&dev->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+printer_open(struct inode *inode, struct file *fd)
+{
+	struct printer_dev	*dev;
+	unsigned long		flags;
+	int			ret = -EBUSY;
+
+	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (!dev->printer_cdev_open) {
+		dev->printer_cdev_open = 1;
+		fd->private_data = dev;
+		ret = 0;
+		/* Change the printer status to show that it's on-line. */
+		dev->printer_status |= PRINTER_SELECTED;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	DBG(dev, "printer_open returned %x\n", ret);
+	return ret;
+}
+
+static int
+printer_close(struct inode *inode, struct file *fd)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->printer_cdev_open = 0;
+	fd->private_data = NULL;
+	/* Change printer status to show that the printer is off-line. */
+	dev->printer_status &= ~PRINTER_SELECTED;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	DBG(dev, "printer_close\n");
+
+	return 0;
+}
+
+/* This function must be called with interrupts turned off. */
+static void
+setup_rx_reqs(struct printer_dev *dev)
+{
+	struct usb_request              *req;
+
+	while (likely(!list_empty(&dev->rx_reqs))) {
+		int error;
+
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+
+		/* The USB Host sends us whatever amount of data it wants to
+		 * so we always set the length field to the full USB_BUFSIZE.
+		 * If the amount of data is more than the read() caller asked
+		 * for it will be stored in the request buffer until it is
+		 * asked for by read().
+		 */
+		req->length = USB_BUFSIZE;
+		req->complete = rx_complete;
+
+		/* here, we unlock, and only unlock, to avoid deadlock. */
+		spin_unlock(&dev->lock);
+		error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
+		spin_lock(&dev->lock);
+		if (error) {
+			DBG(dev, "rx submit --> %d\n", error);
+			list_add(&req->list, &dev->rx_reqs);
+			break;
+		}
+		/* if the req is empty, then add it into dev->rx_reqs_active. */
+		else if (list_empty(&req->list))
+			list_add(&req->list, &dev->rx_reqs_active);
+	}
+}
+
+static ssize_t
+printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
+{
+	struct printer_dev		*dev = fd->private_data;
+	unsigned long			flags;
+	size_t				size;
+	size_t				bytes_copied;
+	struct usb_request		*req;
+	/* This is a pointer to the current USB rx request. */
+	struct usb_request		*current_rx_req;
+	/* This is the number of bytes in the current rx buffer. */
+	size_t				current_rx_bytes;
+	/* This is a pointer to the current rx buffer. */
+	u8				*current_rx_buf;
+
+	if (len == 0)
+		return -EINVAL;
+
+	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* We will use this flag later to check if a printer reset happened
+	 * after we turn interrupts back on.
+	 */
+	dev->reset_printer = 0;
+
+	setup_rx_reqs(dev);
+
+	bytes_copied = 0;
+	current_rx_req = dev->current_rx_req;
+	current_rx_bytes = dev->current_rx_bytes;
+	current_rx_buf = dev->current_rx_buf;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+
+	/* Check if there is any data in the read buffers. Please note that
+	 * current_rx_bytes is the number of bytes in the current rx buffer.
+	 * If it is zero then check if there are any other rx_buffers that
+	 * are on the completed list. We are only out of data if all rx
+	 * buffers are empty.
+	 */
+	if ((current_rx_bytes == 0) &&
+			(likely(list_empty(&dev->rx_buffers)))) {
+		/* Turn interrupts back on before sleeping. */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		/*
+		 * If no data is available check if this is a NON-Blocking
+		 * call or not.
+		 */
+		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* Sleep until data is available */
+		wait_event_interruptible(dev->rx_wait,
+				(likely(!list_empty(&dev->rx_buffers))));
+		spin_lock_irqsave(&dev->lock, flags);
+	}
+
+	/* We have data to return then copy it to the caller's buffer.*/
+	while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
+			&& len) {
+		if (current_rx_bytes == 0) {
+			req = container_of(dev->rx_buffers.next,
+					struct usb_request, list);
+			list_del_init(&req->list);
+
+			if (req->actual && req->buf) {
+				current_rx_req = req;
+				current_rx_bytes = req->actual;
+				current_rx_buf = req->buf;
+			} else {
+				list_add(&req->list, &dev->rx_reqs);
+				continue;
+			}
+		}
+
+		/* Don't leave irqs off while doing memory copies */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (len > current_rx_bytes)
+			size = current_rx_bytes;
+		else
+			size = len;
+
+		size -= copy_to_user(buf, current_rx_buf, size);
+		bytes_copied += size;
+		len -= size;
+		buf += size;
+
+		spin_lock_irqsave(&dev->lock, flags);
+
+		/* We've disconnected or reset so return. */
+		if (dev->reset_printer) {
+			list_add(&current_rx_req->list, &dev->rx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* If we not returning all the data left in this RX request
+		 * buffer then adjust the amount of data left in the buffer.
+		 * Othewise if we are done with this RX request buffer then
+		 * requeue it to get any incoming data from the USB host.
+		 */
+		if (size < current_rx_bytes) {
+			current_rx_bytes -= size;
+			current_rx_buf += size;
+		} else {
+			list_add(&current_rx_req->list, &dev->rx_reqs);
+			current_rx_bytes = 0;
+			current_rx_buf = NULL;
+			current_rx_req = NULL;
+		}
+	}
+
+	dev->current_rx_req = current_rx_req;
+	dev->current_rx_bytes = current_rx_bytes;
+	dev->current_rx_buf = current_rx_buf;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
+
+	if (bytes_copied)
+		return bytes_copied;
+	else
+		return -EAGAIN;
+}
+
+static ssize_t
+printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	size_t			size;	/* Amount of data in a TX request. */
+	size_t			bytes_copied = 0;
+	struct usb_request	*req;
+
+	DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
+
+	if (len == 0)
+		return -EINVAL;
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Check if a printer reset happens while we have interrupts on */
+	dev->reset_printer = 0;
+
+	/* Check if there is any available write buffers */
+	if (likely(list_empty(&dev->tx_reqs))) {
+		/* Turn interrupts back on before sleeping. */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		/*
+		 * If write buffers are available check if this is
+		 * a NON-Blocking call or not.
+		 */
+		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* Sleep until a write buffer is available */
+		wait_event_interruptible(dev->tx_wait,
+				(likely(!list_empty(&dev->tx_reqs))));
+		spin_lock_irqsave(&dev->lock, flags);
+	}
+
+	while (likely(!list_empty(&dev->tx_reqs)) && len) {
+
+		if (len > USB_BUFSIZE)
+			size = USB_BUFSIZE;
+		else
+			size = len;
+
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+
+		req->complete = tx_complete;
+		req->length = size;
+
+		/* Check if we need to send a zero length packet. */
+		if (len > size)
+			/* They will be more TX requests so no yet. */
+			req->zero = 0;
+		else
+			/* If the data amount is not a multiple of the
+			 * maxpacket size then send a zero length packet.
+			 */
+			req->zero = ((len % dev->in_ep->maxpacket) == 0);
+
+		/* Don't leave irqs off while doing memory copies */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (copy_from_user(req->buf, buf, size)) {
+			list_add(&req->list, &dev->tx_reqs);
+			mutex_unlock(&dev->lock_printer_io);
+			return bytes_copied;
+		}
+
+		bytes_copied += size;
+		len -= size;
+		buf += size;
+
+		spin_lock_irqsave(&dev->lock, flags);
+
+		/* We've disconnected or reset so free the req and buffer */
+		if (dev->reset_printer) {
+			list_add(&req->list, &dev->tx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
+			list_add(&req->list, &dev->tx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		list_add(&req->list, &dev->tx_reqs_active);
+
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
+
+	if (bytes_copied)
+		return bytes_copied;
+	else
+		return -EAGAIN;
+}
+
+static int
+printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
+{
+	struct printer_dev	*dev = fd->private_data;
+	struct inode *inode = file_inode(fd);
+	unsigned long		flags;
+	int			tx_list_empty;
+
+	mutex_lock(&inode->i_mutex);
+	spin_lock_irqsave(&dev->lock, flags);
+	tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (!tx_list_empty) {
+		/* Sleep until all data has been sent */
+		wait_event_interruptible(dev->tx_flush_wait,
+				(likely(list_empty(&dev->tx_reqs_active))));
+	}
+	mutex_unlock(&inode->i_mutex);
+
+	return 0;
+}
+
+static unsigned int
+printer_poll(struct file *fd, poll_table *wait)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	int			status = 0;
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+	setup_rx_reqs(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	poll_wait(fd, &dev->rx_wait, wait);
+	poll_wait(fd, &dev->tx_wait, wait);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (likely(!list_empty(&dev->tx_reqs)))
+		status |= POLLOUT | POLLWRNORM;
+
+	if (likely(dev->current_rx_bytes) ||
+			likely(!list_empty(&dev->rx_buffers)))
+		status |= POLLIN | POLLRDNORM;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+static long
+printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	int			status = 0;
+
+	DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
+
+	/* handle ioctls */
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	switch (code) {
+	case GADGET_GET_PRINTER_STATUS:
+		status = (int)dev->printer_status;
+		break;
+	case GADGET_SET_PRINTER_STATUS:
+		dev->printer_status = (u8)arg;
+		break;
+	default:
+		/* could not handle ioctl */
+		DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
+				code);
+		status = -ENOTTY;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+/* used after endpoint configuration */
+static const struct file_operations printer_io_operations = {
+	.owner =	THIS_MODULE,
+	.open =		printer_open,
+	.read =		printer_read,
+	.write =	printer_write,
+	.fsync =	printer_fsync,
+	.poll =		printer_poll,
+	.unlocked_ioctl = printer_ioctl,
+	.release =	printer_close,
+	.llseek =	noop_llseek,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int
+set_printer_interface(struct printer_dev *dev)
+{
+	int			result = 0;
+
+	dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc,
+				&ss_ep_in_desc);
+	dev->in_ep->driver_data = dev;
+
+	dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc,
+				    &hs_ep_out_desc, &ss_ep_out_desc);
+	dev->out_ep->driver_data = dev;
+
+	result = usb_ep_enable(dev->in_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
+		goto done;
+	}
+
+	result = usb_ep_enable(dev->out_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
+		goto done;
+	}
+
+done:
+	/* on error, disable any endpoints  */
+	if (result != 0) {
+		(void) usb_ep_disable(dev->in_ep);
+		(void) usb_ep_disable(dev->out_ep);
+		dev->in_ep->desc = NULL;
+		dev->out_ep->desc = NULL;
+	}
+
+	/* caller is responsible for cleanup on error */
+	return result;
+}
+
+static void printer_reset_interface(struct printer_dev *dev)
+{
+	if (dev->interface < 0)
+		return;
+
+	DBG(dev, "%s\n", __func__);
+
+	if (dev->in_ep->desc)
+		usb_ep_disable(dev->in_ep);
+
+	if (dev->out_ep->desc)
+		usb_ep_disable(dev->out_ep);
+
+	dev->in_ep->desc = NULL;
+	dev->out_ep->desc = NULL;
+	dev->interface = -1;
+}
+
+/* Change our operational Interface. */
+static int set_interface(struct printer_dev *dev, unsigned number)
+{
+	int			result = 0;
+
+	/* Free the current interface */
+	printer_reset_interface(dev);
+
+	result = set_printer_interface(dev);
+	if (result)
+		printer_reset_interface(dev);
+	else
+		dev->interface = number;
+
+	if (!result)
+		INFO(dev, "Using interface %x\n", number);
+
+	return result;
+}
+
+static void printer_soft_reset(struct printer_dev *dev)
+{
+	struct usb_request	*req;
+
+	INFO(dev, "Received Printer Reset Request\n");
+
+	if (usb_ep_disable(dev->in_ep))
+		DBG(dev, "Failed to disable USB in_ep\n");
+	if (usb_ep_disable(dev->out_ep))
+		DBG(dev, "Failed to disable USB out_ep\n");
+
+	if (dev->current_rx_req != NULL) {
+		list_add(&dev->current_rx_req->list, &dev->rx_reqs);
+		dev->current_rx_req = NULL;
+	}
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+	dev->reset_printer = 1;
+
+	while (likely(!(list_empty(&dev->rx_buffers)))) {
+		req = container_of(dev->rx_buffers.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	while (likely(!(list_empty(&dev->rx_reqs_active)))) {
+		req = container_of(dev->rx_buffers.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	while (likely(!(list_empty(&dev->tx_reqs_active)))) {
+		req = container_of(dev->tx_reqs_active.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	if (usb_ep_enable(dev->in_ep))
+		DBG(dev, "Failed to enable USB in_ep\n");
+	if (usb_ep_enable(dev->out_ep))
+		DBG(dev, "Failed to enable USB out_ep\n");
+
+	wake_up_interruptible(&dev->rx_wait);
+	wake_up_interruptible(&dev->tx_wait);
+	wake_up_interruptible(&dev->tx_flush_wait);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static bool gprinter_req_match(struct usb_function *f,
+			       const struct usb_ctrlrequest *ctrl)
+{
+	struct printer_dev	*dev = func_to_printer(f);
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
+	    (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
+		return false;
+
+	switch (ctrl->bRequest) {
+	case GET_DEVICE_ID:
+		w_index >>= 8;
+		if (w_length <= PNP_STRING_LEN &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case GET_PORT_STATUS:
+		if (!w_value && w_length == 1 &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case SOFT_RESET:
+		if (!w_value && !w_length &&
+		   !(USB_DIR_IN & ctrl->bRequestType))
+			break;
+		/* fall through */
+	default:
+		return false;
+	}
+	return w_index == dev->interface;
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's not
+ * handled lower down.
+ */
+static int printer_func_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			wIndex = le16_to_cpu(ctrl->wIndex);
+	u16			wValue = le16_to_cpu(ctrl->wValue);
+	u16			wLength = le16_to_cpu(ctrl->wLength);
+
+	DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
+		ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
+
+	switch (ctrl->bRequestType&USB_TYPE_MASK) {
+	case USB_TYPE_CLASS:
+		switch (ctrl->bRequest) {
+		case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */
+			/* Only one printer interface is supported. */
+			if ((wIndex>>8) != dev->interface)
+				break;
+
+			value = (dev->pnp_string[0] << 8) | dev->pnp_string[1];
+			memcpy(req->buf, dev->pnp_string, value);
+			DBG(dev, "1284 PNP String: %x %s\n", value,
+					&dev->pnp_string[2]);
+			break;
+
+		case GET_PORT_STATUS: /* Get Port Status */
+			/* Only one printer interface is supported. */
+			if (wIndex != dev->interface)
+				break;
+
+			*(u8 *)req->buf = dev->printer_status;
+			value = min_t(u16, wLength, 1);
+			break;
+
+		case SOFT_RESET: /* Soft Reset */
+			/* Only one printer interface is supported. */
+			if (wIndex != dev->interface)
+				break;
+
+			printer_soft_reset(dev);
+
+			value = 0;
+			break;
+
+		default:
+			goto unknown;
+		}
+		break;
+
+	default:
+unknown:
+		VDBG(dev,
+			"unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			wValue, wIndex, wLength);
+		break;
+	}
+	/* host either stalls (value < 0) or reports success */
+	if (value >= 0) {
+		req->length = value;
+		req->zero = value < wLength;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			ERROR(dev, "%s:%d Error!\n", __func__, __LINE__);
+			req->status = 0;
+		}
+	}
+	return value;
+}
+
+static int printer_func_bind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct usb_gadget *gadget = c->cdev->gadget;
+	struct printer_dev *dev = func_to_printer(f);
+	struct device *pdev;
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_ep *in_ep;
+	struct usb_ep *out_ep = NULL;
+	struct usb_request *req;
+	dev_t devt;
+	int id;
+	int ret;
+	u32 i;
+
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	intf_desc.bInterfaceNumber = id;
+
+	/* finish hookup to lower layer ... */
+	dev->gadget = gadget;
+
+	/* all we really need is bulk IN/OUT */
+	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+	if (!in_ep) {
+autoconf_fail:
+		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+			cdev->gadget->name);
+		return -ENODEV;
+	}
+	in_ep->driver_data = in_ep;	/* claim */
+
+	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+	if (!out_ep)
+		goto autoconf_fail;
+	out_ep->driver_data = out_ep;	/* claim */
+
+	/* assumes that all endpoints are dual-speed */
+	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+	ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+	ret = usb_assign_descriptors(f, fs_printer_function,
+			hs_printer_function, ss_printer_function);
+	if (ret)
+		return ret;
+
+	dev->in_ep = in_ep;
+	dev->out_ep = out_ep;
+
+	ret = -ENOMEM;
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_tx_reqs;
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_rx_reqs;
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	/* Setup the sysfs files for the printer gadget. */
+	devt = MKDEV(major, dev->minor);
+	pdev = device_create(usb_gadget_class, NULL, devt,
+				  NULL, "g_printer%d", dev->minor);
+	if (IS_ERR(pdev)) {
+		ERROR(dev, "Failed to create device: g_printer\n");
+		ret = PTR_ERR(pdev);
+		goto fail_rx_reqs;
+	}
+
+	/*
+	 * Register a character device as an interface to a user mode
+	 * program that handles the printer specific functionality.
+	 */
+	cdev_init(&dev->printer_cdev, &printer_io_operations);
+	dev->printer_cdev.owner = THIS_MODULE;
+	ret = cdev_add(&dev->printer_cdev, devt, 1);
+	if (ret) {
+		ERROR(dev, "Failed to open char device\n");
+		goto fail_cdev_add;
+	}
+
+	return 0;
+
+fail_cdev_add:
+	device_destroy(usb_gadget_class, devt);
+
+fail_rx_reqs:
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+fail_tx_reqs:
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	return ret;
+
+}
+
+static int printer_func_set_alt(struct usb_function *f,
+		unsigned intf, unsigned alt)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	int ret = -ENOTSUPP;
+
+	if (!alt)
+		ret = set_interface(dev, intf);
+
+	return ret;
+}
+
+static void printer_func_disable(struct usb_function *f)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	unsigned long		flags;
+
+	DBG(dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	printer_reset_interface(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static inline struct f_printer_opts
+*to_f_printer_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_printer_opts,
+			    func_inst.group);
+}
+
+CONFIGFS_ATTR_STRUCT(f_printer_opts);
+CONFIGFS_ATTR_OPS(f_printer_opts);
+
+static void printer_attr_release(struct config_item *item)
+{
+	struct f_printer_opts *opts = to_f_printer_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations printer_item_ops = {
+	.release	= printer_attr_release,
+	.show_attribute	= f_printer_opts_attr_show,
+	.store_attribute = f_printer_opts_attr_store,
+};
+
+static ssize_t f_printer_opts_pnp_string_show(struct f_printer_opts *opts,
+					      char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = strlcpy(page, opts->pnp_string + 2, PNP_STRING_LEN - 2);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_printer_opts_pnp_string_store(struct f_printer_opts *opts,
+					       const char *page, size_t len)
+{
+	int result, l;
+
+	mutex_lock(&opts->lock);
+	result = strlcpy(opts->pnp_string + 2, page, PNP_STRING_LEN - 2);
+	l = strlen(opts->pnp_string + 2) + 2;
+	opts->pnp_string[0] = (l >> 8) & 0xFF;
+	opts->pnp_string[1] = l & 0xFF;
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static struct f_printer_opts_attribute f_printer_opts_pnp_string =
+	__CONFIGFS_ATTR(pnp_string, S_IRUGO | S_IWUSR,
+			f_printer_opts_pnp_string_show,
+			f_printer_opts_pnp_string_store);
+
+static ssize_t f_printer_opts_q_len_show(struct f_printer_opts *opts,
+					 char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d\n", opts->q_len);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_printer_opts_q_len_store(struct f_printer_opts *opts,
+					  const char *page, size_t len)
+{
+	int ret;
+	u16 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou16(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->q_len = (unsigned)num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_printer_opts_attribute f_printer_opts_q_len =
+	__CONFIGFS_ATTR(q_len, S_IRUGO | S_IWUSR, f_printer_opts_q_len_show,
+			f_printer_opts_q_len_store);
+
+static struct configfs_attribute *printer_attrs[] = {
+	&f_printer_opts_pnp_string.attr,
+	&f_printer_opts_q_len.attr,
+	NULL,
+};
+
+static struct config_item_type printer_func_type = {
+	.ct_item_ops	= &printer_item_ops,
+	.ct_attrs	= printer_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static inline int gprinter_get_minor(void)
+{
+	return ida_simple_get(&printer_ida, 0, 0, GFP_KERNEL);
+}
+
+static inline void gprinter_put_minor(int minor)
+{
+	ida_simple_remove(&printer_ida, minor);
+}
+
+static int gprinter_setup(int);
+static void gprinter_cleanup(void);
+
+static void gprinter_free_inst(struct usb_function_instance *f)
+{
+	struct f_printer_opts *opts;
+
+	opts = container_of(f, struct f_printer_opts, func_inst);
+
+	mutex_lock(&printer_ida_lock);
+
+	gprinter_put_minor(opts->minor);
+	if (idr_is_empty(&printer_ida.idr))
+		gprinter_cleanup();
+
+	mutex_unlock(&printer_ida_lock);
+
+	kfree(opts);
+}
+
+static struct usb_function_instance *gprinter_alloc_inst(void)
+{
+	struct f_printer_opts *opts;
+	struct usb_function_instance *ret;
+	int status = 0;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = gprinter_free_inst;
+	ret = &opts->func_inst;
+
+	mutex_lock(&printer_ida_lock);
+
+	if (idr_is_empty(&printer_ida.idr)) {
+		status = gprinter_setup(PRINTER_MINORS);
+		if (status) {
+			ret = ERR_PTR(status);
+			kfree(opts);
+			goto unlock;
+		}
+	}
+
+	opts->minor = gprinter_get_minor();
+	if (opts->minor < 0) {
+		ret = ERR_PTR(opts->minor);
+		kfree(opts);
+		if (idr_is_empty(&printer_ida.idr))
+			gprinter_cleanup();
+		goto unlock;
+	}
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &printer_func_type);
+
+unlock:
+	mutex_unlock(&printer_ida_lock);
+	return ret;
+}
+
+static void gprinter_free(struct usb_function *f)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	struct f_printer_opts *opts;
+
+	opts = container_of(f->fi, struct f_printer_opts, func_inst);
+	kfree(dev);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
+}
+
+static void printer_func_unbind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct printer_dev	*dev;
+	struct usb_request	*req;
+
+	dev = func_to_printer(f);
+
+	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
+
+	/* Remove Character Device */
+	cdev_del(&dev->printer_cdev);
+
+	/* we must already have been disconnected ... no i/o may be active */
+	WARN_ON(!list_empty(&dev->tx_reqs_active));
+	WARN_ON(!list_empty(&dev->rx_reqs_active));
+
+	/* Free all memory for this driver. */
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	if (dev->current_rx_req != NULL)
+		printer_req_free(dev->out_ep, dev->current_rx_req);
+
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+	while (!list_empty(&dev->rx_buffers)) {
+		req = container_of(dev->rx_buffers.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
+{
+	struct printer_dev	*dev;
+	struct f_printer_opts	*opts;
+
+	opts = container_of(fi, struct f_printer_opts, func_inst);
+
+	mutex_lock(&opts->lock);
+	if (opts->minor >= minors) {
+		mutex_unlock(&opts->lock);
+		return ERR_PTR(-ENOENT);
+	}
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		mutex_unlock(&opts->lock);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	++opts->refcnt;
+	dev->minor = opts->minor;
+	dev->pnp_string = opts->pnp_string;
+	dev->q_len = opts->q_len;
+	mutex_unlock(&opts->lock);
+
+	dev->function.name = "printer";
+	dev->function.bind = printer_func_bind;
+	dev->function.setup = printer_func_setup;
+	dev->function.unbind = printer_func_unbind;
+	dev->function.set_alt = printer_func_set_alt;
+	dev->function.disable = printer_func_disable;
+	dev->function.req_match = gprinter_req_match;
+	dev->function.free_func = gprinter_free;
+
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+	INIT_LIST_HEAD(&dev->rx_buffers);
+	INIT_LIST_HEAD(&dev->tx_reqs_active);
+	INIT_LIST_HEAD(&dev->rx_reqs_active);
+
+	spin_lock_init(&dev->lock);
+	mutex_init(&dev->lock_printer_io);
+	init_waitqueue_head(&dev->rx_wait);
+	init_waitqueue_head(&dev->tx_wait);
+	init_waitqueue_head(&dev->tx_flush_wait);
+
+	dev->interface = -1;
+	dev->printer_cdev_open = 0;
+	dev->printer_status = PRINTER_NOT_ERROR;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+
+	return &dev->function;
+}
+
+DECLARE_USB_FUNCTION_INIT(printer, gprinter_alloc_inst, gprinter_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Craig Nadler");
+
+static int gprinter_setup(int count)
+{
+	int status;
+	dev_t devt;
+
+	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
+	if (IS_ERR(usb_gadget_class)) {
+		status = PTR_ERR(usb_gadget_class);
+		usb_gadget_class = NULL;
+		pr_err("unable to create usb_gadget class %d\n", status);
+		return status;
+	}
+
+	status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget");
+	if (status) {
+		pr_err("alloc_chrdev_region %d\n", status);
+		class_destroy(usb_gadget_class);
+		usb_gadget_class = NULL;
+		return status;
+	}
+
+	major = MAJOR(devt);
+	minors = count;
+
+	return status;
+}
+
+static void gprinter_cleanup(void)
+{
+	if (major) {
+		unregister_chrdev_region(MKDEV(major, 0), minors);
+		major = minors = 0;
+	}
+	class_destroy(usb_gadget_class);
+	usb_gadget_class = NULL;
+}
diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h
new file mode 100644
index 000000000000..0e2c49d4274e
--- /dev/null
+++ b/drivers/usb/gadget/function/u_printer.h
@@ -0,0 +1,37 @@
+/*
+ * u_printer.h
+ *
+ * Utility definitions for the printer function
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_PRINTER_H
+#define U_PRINTER_H
+
+#include <linux/usb/composite.h>
+
+#define PNP_STRING_LEN			1024
+
+struct f_printer_opts {
+	struct usb_function_instance	func_inst;
+	int				minor;
+	char				pnp_string[PNP_STRING_LEN];
+	unsigned			q_len;
+
+	/*
+	 * Protect the data from concurrent access by read/write
+	 * and create symlink/remove symlink
+	 */
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif /* U_PRINTER_H */
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index 491082aaf103..89179ab20c10 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -912,7 +912,7 @@ static int gs_put_char(struct tty_struct *tty, unsigned char ch)
 	unsigned long	flags;
 	int		status;
 
-	pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %pf\n",
+	pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n",
 		port->port_num, tty, ch, __builtin_return_address(0));
 
 	spin_lock_irqsave(&port->port_lock, flags);
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index 113c87e22117..d5a7102de696 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -301,6 +301,7 @@ config USB_MIDI_GADGET
 config USB_G_PRINTER
 	tristate "Printer Gadget"
 	select USB_LIBCOMPOSITE
+	select USB_F_PRINTER
 	help
 	  The Printer Gadget channels data between the USB host and a
 	  userspace program driving the print engine. The user space
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index 90545980542f..d5b6ee725a2a 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -12,29 +12,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/cdev.h>
-
 #include <asm/byteorder.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/uaccess.h>
-#include <asm/unaligned.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/composite.h>
@@ -46,50 +24,12 @@
 USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_DESC		"Printer Gadget"
-#define DRIVER_VERSION		"2007 OCT 06"
+#define DRIVER_VERSION		"2015 FEB 17"
 
-static DEFINE_MUTEX(printer_mutex);
 static const char shortname [] = "printer";
 static const char driver_desc [] = DRIVER_DESC;
 
-static dev_t g_printer_devno;
-
-static struct class *usb_gadget_class;
-
-/*-------------------------------------------------------------------------*/
-
-struct printer_dev {
-	spinlock_t		lock;		/* lock this structure */
-	/* lock buffer lists during read/write calls */
-	struct mutex		lock_printer_io;
-	struct usb_gadget	*gadget;
-	s8			interface;
-	struct usb_ep		*in_ep, *out_ep;
-
-	struct list_head	rx_reqs;	/* List of free RX structs */
-	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
-	struct list_head	rx_buffers;	/* List of completed xfers */
-	/* wait until there is data to be read. */
-	wait_queue_head_t	rx_wait;
-	struct list_head	tx_reqs;	/* List of free TX structs */
-	struct list_head	tx_reqs_active; /* List of Active TX xfers */
-	/* Wait until there are write buffers available to use. */
-	wait_queue_head_t	tx_wait;
-	/* Wait until all write buffers have been sent. */
-	wait_queue_head_t	tx_flush_wait;
-	struct usb_request	*current_rx_req;
-	size_t			current_rx_bytes;
-	u8			*current_rx_buf;
-	u8			printer_status;
-	u8			reset_printer;
-	struct cdev		printer_cdev;
-	struct device		*pdev;
-	u8			printer_cdev_open;
-	wait_queue_head_t	wait;
-	struct usb_function	function;
-};
-
-static struct printer_dev usb_printer_gadget;
+#include "u_printer.h"
 
 /*-------------------------------------------------------------------------*/
 
@@ -120,6 +60,9 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
 
 #define QLEN	qlen
 
+static struct usb_function_instance *fi_printer;
+static struct usb_function *f_printer;
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -127,10 +70,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
  * descriptors are built on demand.
  */
 
-/* holds our biggest descriptor */
-#define USB_DESC_BUFSIZE		256
-#define USB_BUFSIZE			8192
-
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
@@ -143,108 +82,6 @@ static struct usb_device_descriptor device_desc = {
 	.bNumConfigurations =	1
 };
 
-static struct usb_interface_descriptor intf_desc = {
-	.bLength =		sizeof intf_desc,
-	.bDescriptorType =	USB_DT_INTERFACE,
-	.bNumEndpoints =	2,
-	.bInterfaceClass =	USB_CLASS_PRINTER,
-	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
-	.bInterfaceProtocol =	2,	/* Bi-Directional */
-	.iInterface =		0
-};
-
-static struct usb_endpoint_descriptor fs_ep_in_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_IN,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK
-};
-
-static struct usb_endpoint_descriptor fs_ep_out_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_OUT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK
-};
-
-static struct usb_descriptor_header *fs_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &fs_ep_in_desc,
-	(struct usb_descriptor_header *) &fs_ep_out_desc,
-	NULL
-};
-
-/*
- * usb 2.0 devices need to expose both high speed and full speed
- * descriptors, unless they only run at full speed.
- */
-
-static struct usb_endpoint_descriptor hs_ep_in_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	cpu_to_le16(512)
-};
-
-static struct usb_endpoint_descriptor hs_ep_out_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	cpu_to_le16(512)
-};
-
-static struct usb_qualifier_descriptor dev_qualifier = {
-	.bLength =		sizeof dev_qualifier,
-	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
-	.bcdUSB =		cpu_to_le16(0x0200),
-	.bDeviceClass =		USB_CLASS_PRINTER,
-	.bNumConfigurations =	1
-};
-
-static struct usb_descriptor_header *hs_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &hs_ep_in_desc,
-	(struct usb_descriptor_header *) &hs_ep_out_desc,
-	NULL
-};
-
-/*
- * Added endpoint descriptors for 3.0 devices
- */
-
-static struct usb_endpoint_descriptor ss_ep_in_desc = {
-	.bLength =              USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =      USB_DT_ENDPOINT,
-	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =       cpu_to_le16(1024),
-};
-
-static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = {
-	.bLength =              sizeof(ss_ep_in_comp_desc),
-	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
-};
-
-static struct usb_endpoint_descriptor ss_ep_out_desc = {
-	.bLength =              USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =      USB_DT_ENDPOINT,
-	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =       cpu_to_le16(1024),
-};
-
-static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = {
-	.bLength =              sizeof(ss_ep_out_comp_desc),
-	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
-};
-
-static struct usb_descriptor_header *ss_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &ss_ep_in_desc,
-	(struct usb_descriptor_header *) &ss_ep_in_comp_desc,
-	(struct usb_descriptor_header *) &ss_ep_out_desc,
-	(struct usb_descriptor_header *) &ss_ep_out_comp_desc,
-	NULL
-};
-
 static struct usb_otg_descriptor otg_descriptor = {
 	.bLength =              sizeof otg_descriptor,
 	.bDescriptorType =      USB_DT_OTG,
@@ -256,29 +93,13 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
-					struct usb_endpoint_descriptor *fs,
-					struct usb_endpoint_descriptor *hs,
-					struct usb_endpoint_descriptor *ss)
-{
-	switch (gadget->speed) {
-	case USB_SPEED_SUPER:
-		return ss;
-	case USB_SPEED_HIGH:
-		return hs;
-	default:
-		return fs;
-	}
-}
-
 /*-------------------------------------------------------------------------*/
 
 /* descriptors that are built on-demand */
 
 static char				product_desc [40] = DRIVER_DESC;
 static char				serial_num [40] = "1";
-static char				pnp_string [1024] =
+static char				pnp_string[PNP_STRING_LEN] =
 	"XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
 
 /* static strings, in UTF-8 */
@@ -299,921 +120,19 @@ static struct usb_gadget_strings *dev_strings[] = {
 	NULL,
 };
 
-/*-------------------------------------------------------------------------*/
-
-static struct usb_request *
-printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
-{
-	struct usb_request	*req;
-
-	req = usb_ep_alloc_request(ep, gfp_flags);
-
-	if (req != NULL) {
-		req->length = len;
-		req->buf = kmalloc(len, gfp_flags);
-		if (req->buf == NULL) {
-			usb_ep_free_request(ep, req);
-			return NULL;
-		}
-	}
-
-	return req;
-}
-
-static void
-printer_req_free(struct usb_ep *ep, struct usb_request *req)
-{
-	if (ep != NULL && req != NULL) {
-		kfree(req->buf);
-		usb_ep_free_request(ep, req);
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void rx_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct printer_dev	*dev = ep->driver_data;
-	int			status = req->status;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	list_del_init(&req->list);	/* Remode from Active List */
-
-	switch (status) {
-
-	/* normal completion */
-	case 0:
-		if (req->actual > 0) {
-			list_add_tail(&req->list, &dev->rx_buffers);
-			DBG(dev, "G_Printer : rx length %d\n", req->actual);
-		} else {
-			list_add(&req->list, &dev->rx_reqs);
-		}
-		break;
-
-	/* software-driven interface shutdown */
-	case -ECONNRESET:		/* unlink */
-	case -ESHUTDOWN:		/* disconnect etc */
-		VDBG(dev, "rx shutdown, code %d\n", status);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-
-	/* for hardware automagic (such as pxa) */
-	case -ECONNABORTED:		/* endpoint reset */
-		DBG(dev, "rx %s reset\n", ep->name);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-
-	/* data overrun */
-	case -EOVERFLOW:
-		/* FALLTHROUGH */
-
-	default:
-		DBG(dev, "rx status %d\n", status);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-	}
-
-	wake_up_interruptible(&dev->rx_wait);
-	spin_unlock_irqrestore(&dev->lock, flags);
-}
-
-static void tx_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct printer_dev	*dev = ep->driver_data;
-
-	switch (req->status) {
-	default:
-		VDBG(dev, "tx err %d\n", req->status);
-		/* FALLTHROUGH */
-	case -ECONNRESET:		/* unlink */
-	case -ESHUTDOWN:		/* disconnect etc */
-		break;
-	case 0:
-		break;
-	}
-
-	spin_lock(&dev->lock);
-	/* Take the request struct off the active list and put it on the
-	 * free list.
-	 */
-	list_del_init(&req->list);
-	list_add(&req->list, &dev->tx_reqs);
-	wake_up_interruptible(&dev->tx_wait);
-	if (likely(list_empty(&dev->tx_reqs_active)))
-		wake_up_interruptible(&dev->tx_flush_wait);
-
-	spin_unlock(&dev->lock);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int
-printer_open(struct inode *inode, struct file *fd)
-{
-	struct printer_dev	*dev;
-	unsigned long		flags;
-	int			ret = -EBUSY;
-
-	mutex_lock(&printer_mutex);
-	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	if (!dev->printer_cdev_open) {
-		dev->printer_cdev_open = 1;
-		fd->private_data = dev;
-		ret = 0;
-		/* Change the printer status to show that it's on-line. */
-		dev->printer_status |= PRINTER_SELECTED;
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	DBG(dev, "printer_open returned %x\n", ret);
-	mutex_unlock(&printer_mutex);
-	return ret;
-}
-
-static int
-printer_close(struct inode *inode, struct file *fd)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->printer_cdev_open = 0;
-	fd->private_data = NULL;
-	/* Change printer status to show that the printer is off-line. */
-	dev->printer_status &= ~PRINTER_SELECTED;
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	DBG(dev, "printer_close\n");
-
-	return 0;
-}
-
-/* This function must be called with interrupts turned off. */
-static void
-setup_rx_reqs(struct printer_dev *dev)
-{
-	struct usb_request              *req;
-
-	while (likely(!list_empty(&dev->rx_reqs))) {
-		int error;
-
-		req = container_of(dev->rx_reqs.next,
-				struct usb_request, list);
-		list_del_init(&req->list);
-
-		/* The USB Host sends us whatever amount of data it wants to
-		 * so we always set the length field to the full USB_BUFSIZE.
-		 * If the amount of data is more than the read() caller asked
-		 * for it will be stored in the request buffer until it is
-		 * asked for by read().
-		 */
-		req->length = USB_BUFSIZE;
-		req->complete = rx_complete;
-
-		/* here, we unlock, and only unlock, to avoid deadlock. */
-		spin_unlock(&dev->lock);
-		error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
-		spin_lock(&dev->lock);
-		if (error) {
-			DBG(dev, "rx submit --> %d\n", error);
-			list_add(&req->list, &dev->rx_reqs);
-			break;
-		}
-		/* if the req is empty, then add it into dev->rx_reqs_active. */
-		else if (list_empty(&req->list)) {
-			list_add(&req->list, &dev->rx_reqs_active);
-		}
-	}
-}
-
-static ssize_t
-printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
-{
-	struct printer_dev		*dev = fd->private_data;
-	unsigned long			flags;
-	size_t				size;
-	size_t				bytes_copied;
-	struct usb_request		*req;
-	/* This is a pointer to the current USB rx request. */
-	struct usb_request		*current_rx_req;
-	/* This is the number of bytes in the current rx buffer. */
-	size_t				current_rx_bytes;
-	/* This is a pointer to the current rx buffer. */
-	u8				*current_rx_buf;
-
-	if (len == 0)
-		return -EINVAL;
-
-	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* We will use this flag later to check if a printer reset happened
-	 * after we turn interrupts back on.
-	 */
-	dev->reset_printer = 0;
-
-	setup_rx_reqs(dev);
-
-	bytes_copied = 0;
-	current_rx_req = dev->current_rx_req;
-	current_rx_bytes = dev->current_rx_bytes;
-	current_rx_buf = dev->current_rx_buf;
-	dev->current_rx_req = NULL;
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-
-	/* Check if there is any data in the read buffers. Please note that
-	 * current_rx_bytes is the number of bytes in the current rx buffer.
-	 * If it is zero then check if there are any other rx_buffers that
-	 * are on the completed list. We are only out of data if all rx
-	 * buffers are empty.
-	 */
-	if ((current_rx_bytes == 0) &&
-			(likely(list_empty(&dev->rx_buffers)))) {
-		/* Turn interrupts back on before sleeping. */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		/*
-		 * If no data is available check if this is a NON-Blocking
-		 * call or not.
-		 */
-		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* Sleep until data is available */
-		wait_event_interruptible(dev->rx_wait,
-				(likely(!list_empty(&dev->rx_buffers))));
-		spin_lock_irqsave(&dev->lock, flags);
-	}
-
-	/* We have data to return then copy it to the caller's buffer.*/
-	while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
-			&& len) {
-		if (current_rx_bytes == 0) {
-			req = container_of(dev->rx_buffers.next,
-					struct usb_request, list);
-			list_del_init(&req->list);
-
-			if (req->actual && req->buf) {
-				current_rx_req = req;
-				current_rx_bytes = req->actual;
-				current_rx_buf = req->buf;
-			} else {
-				list_add(&req->list, &dev->rx_reqs);
-				continue;
-			}
-		}
-
-		/* Don't leave irqs off while doing memory copies */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		if (len > current_rx_bytes)
-			size = current_rx_bytes;
-		else
-			size = len;
-
-		size -= copy_to_user(buf, current_rx_buf, size);
-		bytes_copied += size;
-		len -= size;
-		buf += size;
-
-		spin_lock_irqsave(&dev->lock, flags);
-
-		/* We've disconnected or reset so return. */
-		if (dev->reset_printer) {
-			list_add(&current_rx_req->list, &dev->rx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* If we not returning all the data left in this RX request
-		 * buffer then adjust the amount of data left in the buffer.
-		 * Othewise if we are done with this RX request buffer then
-		 * requeue it to get any incoming data from the USB host.
-		 */
-		if (size < current_rx_bytes) {
-			current_rx_bytes -= size;
-			current_rx_buf += size;
-		} else {
-			list_add(&current_rx_req->list, &dev->rx_reqs);
-			current_rx_bytes = 0;
-			current_rx_buf = NULL;
-			current_rx_req = NULL;
-		}
-	}
-
-	dev->current_rx_req = current_rx_req;
-	dev->current_rx_bytes = current_rx_bytes;
-	dev->current_rx_buf = current_rx_buf;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
-
-	if (bytes_copied)
-		return bytes_copied;
-	else
-		return -EAGAIN;
-}
-
-static ssize_t
-printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	size_t			size;	/* Amount of data in a TX request. */
-	size_t			bytes_copied = 0;
-	struct usb_request	*req;
-
-	DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
-
-	if (len == 0)
-		return -EINVAL;
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* Check if a printer reset happens while we have interrupts on */
-	dev->reset_printer = 0;
-
-	/* Check if there is any available write buffers */
-	if (likely(list_empty(&dev->tx_reqs))) {
-		/* Turn interrupts back on before sleeping. */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		/*
-		 * If write buffers are available check if this is
-		 * a NON-Blocking call or not.
-		 */
-		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* Sleep until a write buffer is available */
-		wait_event_interruptible(dev->tx_wait,
-				(likely(!list_empty(&dev->tx_reqs))));
-		spin_lock_irqsave(&dev->lock, flags);
-	}
-
-	while (likely(!list_empty(&dev->tx_reqs)) && len) {
-
-		if (len > USB_BUFSIZE)
-			size = USB_BUFSIZE;
-		else
-			size = len;
-
-		req = container_of(dev->tx_reqs.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-
-		req->complete = tx_complete;
-		req->length = size;
-
-		/* Check if we need to send a zero length packet. */
-		if (len > size)
-			/* They will be more TX requests so no yet. */
-			req->zero = 0;
-		else
-			/* If the data amount is not a multple of the
-			 * maxpacket size then send a zero length packet.
-			 */
-			req->zero = ((len % dev->in_ep->maxpacket) == 0);
-
-		/* Don't leave irqs off while doing memory copies */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		if (copy_from_user(req->buf, buf, size)) {
-			list_add(&req->list, &dev->tx_reqs);
-			mutex_unlock(&dev->lock_printer_io);
-			return bytes_copied;
-		}
-
-		bytes_copied += size;
-		len -= size;
-		buf += size;
-
-		spin_lock_irqsave(&dev->lock, flags);
-
-		/* We've disconnected or reset so free the req and buffer */
-		if (dev->reset_printer) {
-			list_add(&req->list, &dev->tx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
-			list_add(&req->list, &dev->tx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		list_add(&req->list, &dev->tx_reqs_active);
-
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
-
-	if (bytes_copied) {
-		return bytes_copied;
-	} else {
-		return -EAGAIN;
-	}
-}
-
-static int
-printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
-{
-	struct printer_dev	*dev = fd->private_data;
-	struct inode *inode = file_inode(fd);
-	unsigned long		flags;
-	int			tx_list_empty;
-
-	mutex_lock(&inode->i_mutex);
-	spin_lock_irqsave(&dev->lock, flags);
-	tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	if (!tx_list_empty) {
-		/* Sleep until all data has been sent */
-		wait_event_interruptible(dev->tx_flush_wait,
-				(likely(list_empty(&dev->tx_reqs_active))));
-	}
-	mutex_unlock(&inode->i_mutex);
-
-	return 0;
-}
-
-static unsigned int
-printer_poll(struct file *fd, poll_table *wait)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	int			status = 0;
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-	setup_rx_reqs(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	poll_wait(fd, &dev->rx_wait, wait);
-	poll_wait(fd, &dev->tx_wait, wait);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	if (likely(!list_empty(&dev->tx_reqs)))
-		status |= POLLOUT | POLLWRNORM;
-
-	if (likely(dev->current_rx_bytes) ||
-			likely(!list_empty(&dev->rx_buffers)))
-		status |= POLLIN | POLLRDNORM;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return status;
-}
-
-static long
-printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	int			status = 0;
-
-	DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
-
-	/* handle ioctls */
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	switch (code) {
-	case GADGET_GET_PRINTER_STATUS:
-		status = (int)dev->printer_status;
-		break;
-	case GADGET_SET_PRINTER_STATUS:
-		dev->printer_status = (u8)arg;
-		break;
-	default:
-		/* could not handle ioctl */
-		DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
-				code);
-		status = -ENOTTY;
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return status;
-}
-
-/* used after endpoint configuration */
-static const struct file_operations printer_io_operations = {
-	.owner =	THIS_MODULE,
-	.open =		printer_open,
-	.read =		printer_read,
-	.write =	printer_write,
-	.fsync =	printer_fsync,
-	.poll =		printer_poll,
-	.unlocked_ioctl = printer_ioctl,
-	.release =	printer_close,
-	.llseek =	noop_llseek,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int
-set_printer_interface(struct printer_dev *dev)
-{
-	int			result = 0;
-
-	dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc,
-				&ss_ep_in_desc);
-	dev->in_ep->driver_data = dev;
-
-	dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc,
-				    &hs_ep_out_desc, &ss_ep_out_desc);
-	dev->out_ep->driver_data = dev;
-
-	result = usb_ep_enable(dev->in_ep);
-	if (result != 0) {
-		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
-		goto done;
-	}
-
-	result = usb_ep_enable(dev->out_ep);
-	if (result != 0) {
-		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
-		goto done;
-	}
-
-done:
-	/* on error, disable any endpoints  */
-	if (result != 0) {
-		(void) usb_ep_disable(dev->in_ep);
-		(void) usb_ep_disable(dev->out_ep);
-		dev->in_ep->desc = NULL;
-		dev->out_ep->desc = NULL;
-	}
-
-	/* caller is responsible for cleanup on error */
-	return result;
-}
-
-static void printer_reset_interface(struct printer_dev *dev)
-{
-	if (dev->interface < 0)
-		return;
-
-	DBG(dev, "%s\n", __func__);
-
-	if (dev->in_ep->desc)
-		usb_ep_disable(dev->in_ep);
-
-	if (dev->out_ep->desc)
-		usb_ep_disable(dev->out_ep);
-
-	dev->in_ep->desc = NULL;
-	dev->out_ep->desc = NULL;
-	dev->interface = -1;
-}
-
-/* Change our operational Interface. */
-static int set_interface(struct printer_dev *dev, unsigned number)
-{
-	int			result = 0;
-
-	/* Free the current interface */
-	printer_reset_interface(dev);
-
-	result = set_printer_interface(dev);
-	if (result)
-		printer_reset_interface(dev);
-	else
-		dev->interface = number;
-
-	if (!result)
-		INFO(dev, "Using interface %x\n", number);
-
-	return result;
-}
-
-static void printer_soft_reset(struct printer_dev *dev)
-{
-	struct usb_request	*req;
-
-	INFO(dev, "Received Printer Reset Request\n");
-
-	if (usb_ep_disable(dev->in_ep))
-		DBG(dev, "Failed to disable USB in_ep\n");
-	if (usb_ep_disable(dev->out_ep))
-		DBG(dev, "Failed to disable USB out_ep\n");
-
-	if (dev->current_rx_req != NULL) {
-		list_add(&dev->current_rx_req->list, &dev->rx_reqs);
-		dev->current_rx_req = NULL;
-	}
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-	dev->reset_printer = 1;
-
-	while (likely(!(list_empty(&dev->rx_buffers)))) {
-		req = container_of(dev->rx_buffers.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	while (likely(!(list_empty(&dev->rx_reqs_active)))) {
-		req = container_of(dev->rx_buffers.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	while (likely(!(list_empty(&dev->tx_reqs_active)))) {
-		req = container_of(dev->tx_reqs_active.next,
-				struct usb_request, list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->tx_reqs);
-	}
-
-	if (usb_ep_enable(dev->in_ep))
-		DBG(dev, "Failed to enable USB in_ep\n");
-	if (usb_ep_enable(dev->out_ep))
-		DBG(dev, "Failed to enable USB out_ep\n");
-
-	wake_up_interruptible(&dev->rx_wait);
-	wake_up_interruptible(&dev->tx_wait);
-	wake_up_interruptible(&dev->tx_flush_wait);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * The setup() callback implements all the ep0 functionality that's not
- * handled lower down.
- */
-static int printer_func_setup(struct usb_function *f,
-		const struct usb_ctrlrequest *ctrl)
-{
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
-	struct usb_composite_dev *cdev = f->config->cdev;
-	struct usb_request	*req = cdev->req;
-	int			value = -EOPNOTSUPP;
-	u16			wIndex = le16_to_cpu(ctrl->wIndex);
-	u16			wValue = le16_to_cpu(ctrl->wValue);
-	u16			wLength = le16_to_cpu(ctrl->wLength);
-
-	DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
-		ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
-
-	switch (ctrl->bRequestType&USB_TYPE_MASK) {
-	case USB_TYPE_CLASS:
-		switch (ctrl->bRequest) {
-		case 0: /* Get the IEEE-1284 PNP String */
-			/* Only one printer interface is supported. */
-			if ((wIndex>>8) != dev->interface)
-				break;
-
-			value = (pnp_string[0]<<8)|pnp_string[1];
-			memcpy(req->buf, pnp_string, value);
-			DBG(dev, "1284 PNP String: %x %s\n", value,
-					&pnp_string[2]);
-			break;
-
-		case 1: /* Get Port Status */
-			/* Only one printer interface is supported. */
-			if (wIndex != dev->interface)
-				break;
-
-			*(u8 *)req->buf = dev->printer_status;
-			value = min(wLength, (u16) 1);
-			break;
-
-		case 2: /* Soft Reset */
-			/* Only one printer interface is supported. */
-			if (wIndex != dev->interface)
-				break;
-
-			printer_soft_reset(dev);
-
-			value = 0;
-			break;
-
-		default:
-			goto unknown;
-		}
-		break;
-
-	default:
-unknown:
-		VDBG(dev,
-			"unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			wValue, wIndex, wLength);
-		break;
-	}
-	/* host either stalls (value < 0) or reports success */
-	return value;
-}
-
-static int __init printer_func_bind(struct usb_configuration *c,
-		struct usb_function *f)
-{
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
-	struct usb_composite_dev *cdev = c->cdev;
-	struct usb_ep *in_ep;
-	struct usb_ep *out_ep = NULL;
-	int id;
-	int ret;
-
-	id = usb_interface_id(c, f);
-	if (id < 0)
-		return id;
-	intf_desc.bInterfaceNumber = id;
-
-	/* all we really need is bulk IN/OUT */
-	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
-	if (!in_ep) {
-autoconf_fail:
-		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
-			cdev->gadget->name);
-		return -ENODEV;
-	}
-	in_ep->driver_data = in_ep;	/* claim */
-
-	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
-	if (!out_ep)
-		goto autoconf_fail;
-	out_ep->driver_data = out_ep;	/* claim */
-
-	/* assumes that all endpoints are dual-speed */
-	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-	ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-
-	ret = usb_assign_descriptors(f, fs_printer_function,
-			hs_printer_function, ss_printer_function);
-	if (ret)
-		return ret;
-
-	dev->in_ep = in_ep;
-	dev->out_ep = out_ep;
-	return 0;
-}
-
-static void printer_func_unbind(struct usb_configuration *c,
-		struct usb_function *f)
-{
-	usb_free_all_descriptors(f);
-}
-
-static int printer_func_set_alt(struct usb_function *f,
-		unsigned intf, unsigned alt)
-{
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
-	int ret = -ENOTSUPP;
-
-	if (!alt)
-		ret = set_interface(dev, intf);
-
-	return ret;
-}
-
-static void printer_func_disable(struct usb_function *f)
-{
-	struct printer_dev *dev = container_of(f, struct printer_dev, function);
-	unsigned long		flags;
-
-	DBG(dev, "%s\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	printer_reset_interface(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-}
-
-static void printer_cfg_unbind(struct usb_configuration *c)
-{
-	struct printer_dev	*dev;
-	struct usb_request	*req;
-
-	dev = &usb_printer_gadget;
-
-	DBG(dev, "%s\n", __func__);
-
-	/* Remove sysfs files */
-	device_destroy(usb_gadget_class, g_printer_devno);
-
-	/* Remove Character Device */
-	cdev_del(&dev->printer_cdev);
-
-	/* we must already have been disconnected ... no i/o may be active */
-	WARN_ON(!list_empty(&dev->tx_reqs_active));
-	WARN_ON(!list_empty(&dev->rx_reqs_active));
-
-	/* Free all memory for this driver. */
-	while (!list_empty(&dev->tx_reqs)) {
-		req = container_of(dev->tx_reqs.next, struct usb_request,
-				list);
-		list_del(&req->list);
-		printer_req_free(dev->in_ep, req);
-	}
-
-	if (dev->current_rx_req != NULL)
-		printer_req_free(dev->out_ep, dev->current_rx_req);
-
-	while (!list_empty(&dev->rx_reqs)) {
-		req = container_of(dev->rx_reqs.next,
-				struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-
-	while (!list_empty(&dev->rx_buffers)) {
-		req = container_of(dev->rx_buffers.next,
-				struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-}
-
 static struct usb_configuration printer_cfg_driver = {
 	.label			= "printer",
-	.unbind			= printer_cfg_unbind,
 	.bConfigurationValue	= 1,
 	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 };
 
-static int __init printer_bind_config(struct usb_configuration *c)
+static int __init printer_do_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
-	struct printer_dev	*dev;
-	int			status = -ENOMEM;
-	size_t			len;
-	u32			i;
-	struct usb_request	*req;
+	int			status = 0;
 
 	usb_ep_autoconfig_reset(gadget);
 
-	dev = &usb_printer_gadget;
-
-	dev->function.name = shortname;
-	dev->function.bind = printer_func_bind;
-	dev->function.setup = printer_func_setup;
-	dev->function.unbind = printer_func_unbind;
-	dev->function.set_alt = printer_func_set_alt;
-	dev->function.disable = printer_func_disable;
-
-	status = usb_add_function(c, &dev->function);
-	if (status)
-		return status;
-
-	/* Setup the sysfs files for the printer gadget. */
-	dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
-				  NULL, "g_printer");
-	if (IS_ERR(dev->pdev)) {
-		ERROR(dev, "Failed to create device: g_printer\n");
-		status = PTR_ERR(dev->pdev);
-		goto fail;
-	}
-
-	/*
-	 * Register a character device as an interface to a user mode
-	 * program that handles the printer specific functionality.
-	 */
-	cdev_init(&dev->printer_cdev, &printer_io_operations);
-	dev->printer_cdev.owner = THIS_MODULE;
-	status = cdev_add(&dev->printer_cdev, g_printer_devno, 1);
-	if (status) {
-		ERROR(dev, "Failed to open char device\n");
-		goto fail;
-	}
-
-	if (iPNPstring)
-		strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
-
-	len = strlen(pnp_string);
-	pnp_string[0] = (len >> 8) & 0xFF;
-	pnp_string[1] = len & 0xFF;
-
 	usb_gadget_set_selfpowered(gadget);
 
 	if (gadget_is_otg(gadget)) {
@@ -1222,86 +141,64 @@ static int __init printer_bind_config(struct usb_configuration *c)
 		printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	spin_lock_init(&dev->lock);
-	mutex_init(&dev->lock_printer_io);
-	INIT_LIST_HEAD(&dev->tx_reqs);
-	INIT_LIST_HEAD(&dev->tx_reqs_active);
-	INIT_LIST_HEAD(&dev->rx_reqs);
-	INIT_LIST_HEAD(&dev->rx_reqs_active);
-	INIT_LIST_HEAD(&dev->rx_buffers);
-	init_waitqueue_head(&dev->rx_wait);
-	init_waitqueue_head(&dev->tx_wait);
-	init_waitqueue_head(&dev->tx_flush_wait);
-
-	dev->interface = -1;
-	dev->printer_cdev_open = 0;
-	dev->printer_status = PRINTER_NOT_ERROR;
-	dev->current_rx_req = NULL;
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-
-	for (i = 0; i < QLEN; i++) {
-		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req) {
-			while (!list_empty(&dev->tx_reqs)) {
-				req = container_of(dev->tx_reqs.next,
-						struct usb_request, list);
-				list_del(&req->list);
-				printer_req_free(dev->in_ep, req);
-			}
-			return -ENOMEM;
-		}
-		list_add(&req->list, &dev->tx_reqs);
-	}
-
-	for (i = 0; i < QLEN; i++) {
-		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req) {
-			while (!list_empty(&dev->rx_reqs)) {
-				req = container_of(dev->rx_reqs.next,
-						struct usb_request, list);
-				list_del(&req->list);
-				printer_req_free(dev->out_ep, req);
-			}
-			return -ENOMEM;
-		}
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	/* finish hookup to lower layer ... */
-	dev->gadget = gadget;
+	f_printer = usb_get_function(fi_printer);
+	if (IS_ERR(f_printer))
+		return PTR_ERR(f_printer);
 
-	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
-	return 0;
+	status = usb_add_function(c, f_printer);
+	if (status < 0)
+		usb_put_function(f_printer);
 
-fail:
-	printer_cfg_unbind(c);
 	return status;
 }
 
-static int printer_unbind(struct usb_composite_dev *cdev)
-{
-	return 0;
-}
-
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
-	int ret;
+	struct f_printer_opts *opts;
+	int ret, len;
+
+	fi_printer = usb_get_function_instance("printer");
+	if (IS_ERR(fi_printer))
+		return PTR_ERR(fi_printer);
+
+	if (iPNPstring)
+		strlcpy(&pnp_string[2], iPNPstring, PNP_STRING_LEN - 2);
+
+	len = strlen(pnp_string);
+	pnp_string[0] = (len >> 8) & 0xFF;
+	pnp_string[1] = len & 0xFF;
+
+	opts = container_of(fi_printer, struct f_printer_opts, func_inst);
+	opts->minor = 0;
+	memcpy(opts->pnp_string, pnp_string, PNP_STRING_LEN);
+	opts->q_len = QLEN;
 
 	ret = usb_string_ids_tab(cdev, strings);
-	if (ret < 0)
+	if (ret < 0) {
+		usb_put_function_instance(fi_printer);
 		return ret;
+	}
 	device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
 	device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
 	device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
 
-	ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
-	if (ret)
+	ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
+	if (ret) {
+		usb_put_function_instance(fi_printer);
 		return ret;
+	}
 	usb_composite_overwrite_options(cdev, &coverwrite);
 	return ret;
 }
 
+static int __exit printer_unbind(struct usb_composite_dev *cdev)
+{
+	usb_put_function(f_printer);
+	usb_put_function_instance(fi_printer);
+
+	return 0;
+}
+
 static __refdata struct usb_composite_driver printer_driver = {
 	.name           = shortname,
 	.dev            = &device_desc,
@@ -1311,47 +208,7 @@ static __refdata struct usb_composite_driver printer_driver = {
 	.unbind		= printer_unbind,
 };
 
-static int __init
-init(void)
-{
-	int status;
-
-	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
-	if (IS_ERR(usb_gadget_class)) {
-		status = PTR_ERR(usb_gadget_class);
-		pr_err("unable to create usb_gadget class %d\n", status);
-		return status;
-	}
-
-	status = alloc_chrdev_region(&g_printer_devno, 0, 1,
-			"USB printer gadget");
-	if (status) {
-		pr_err("alloc_chrdev_region %d\n", status);
-		class_destroy(usb_gadget_class);
-		return status;
-	}
-
-	status = usb_composite_probe(&printer_driver);
-	if (status) {
-		class_destroy(usb_gadget_class);
-		unregister_chrdev_region(g_printer_devno, 1);
-		pr_err("usb_gadget_probe_driver %x\n", status);
-	}
-
-	return status;
-}
-module_init(init);
-
-static void __exit
-cleanup(void)
-{
-	mutex_lock(&usb_printer_gadget.lock_printer_io);
-	usb_composite_unregister(&printer_driver);
-	unregister_chrdev_region(g_printer_devno, 1);
-	class_destroy(usb_gadget_class);
-	mutex_unlock(&usb_printer_gadget.lock_printer_io);
-}
-module_exit(cleanup);
+module_usb_composite_driver(printer_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Craig Nadler");
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index d79cb35dbf8a..4c01953a0869 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -152,7 +152,7 @@ static int regs_dbg_open(struct inode *inode, struct file *file)
 
 	spin_lock_irq(&udc->lock);
 	for (i = 0; i < inode->i_size / 4; i++)
-		data[i] = __raw_readl(udc->regs + i * 4);
+		data[i] = usba_io_readl(udc->regs + i * 4);
 	spin_unlock_irq(&udc->lock);
 
 	file->private_data = data;
@@ -1249,7 +1249,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
 		if (crq->wLength != cpu_to_le16(sizeof(status)))
 			goto stall;
 		ep->state = DATA_STAGE_IN;
-		__raw_writew(status, ep->fifo);
+		usba_io_writew(status, ep->fifo);
 		usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
 		break;
 	}
@@ -1739,7 +1739,72 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t usba_vbus_irq(int irq, void *devid)
+static int start_clock(struct usba_udc *udc)
+{
+	int ret;
+
+	if (udc->clocked)
+		return 0;
+
+	ret = clk_prepare_enable(udc->pclk);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(udc->hclk);
+	if (ret) {
+		clk_disable_unprepare(udc->pclk);
+		return ret;
+	}
+
+	udc->clocked = true;
+	return 0;
+}
+
+static void stop_clock(struct usba_udc *udc)
+{
+	if (!udc->clocked)
+		return;
+
+	clk_disable_unprepare(udc->hclk);
+	clk_disable_unprepare(udc->pclk);
+
+	udc->clocked = false;
+}
+
+static int usba_start(struct usba_udc *udc)
+{
+	unsigned long flags;
+	int ret;
+
+	ret = start_clock(udc);
+	if (ret)
+		return ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	toggle_bias(udc, 1);
+	usba_writel(udc, CTRL, USBA_ENABLE_MASK);
+	usba_int_enb_set(udc, USBA_END_OF_RESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static void usba_stop(struct usba_udc *udc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	reset_all_endpoints(udc);
+
+	/* This will also disable the DP pullup */
+	toggle_bias(udc, 0);
+	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	stop_clock(udc);
+}
+
+static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
 {
 	struct usba_udc *udc = devid;
 	int vbus;
@@ -1747,35 +1812,22 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
 	/* debounce */
 	udelay(10);
 
-	spin_lock(&udc->lock);
-
-	/* May happen if Vbus pin toggles during probe() */
-	if (!udc->driver)
-		goto out;
+	mutex_lock(&udc->vbus_mutex);
 
 	vbus = vbus_is_present(udc);
 	if (vbus != udc->vbus_prev) {
 		if (vbus) {
-			toggle_bias(udc, 1);
-			usba_writel(udc, CTRL, USBA_ENABLE_MASK);
-			usba_int_enb_set(udc, USBA_END_OF_RESET);
+			usba_start(udc);
 		} else {
-			udc->gadget.speed = USB_SPEED_UNKNOWN;
-			reset_all_endpoints(udc);
-			toggle_bias(udc, 0);
-			usba_writel(udc, CTRL, USBA_DISABLE_MASK);
-			if (udc->driver->disconnect) {
-				spin_unlock(&udc->lock);
+			usba_stop(udc);
+
+			if (udc->driver->disconnect)
 				udc->driver->disconnect(&udc->gadget);
-				spin_lock(&udc->lock);
-			}
 		}
 		udc->vbus_prev = vbus;
 	}
 
-out:
-	spin_unlock(&udc->lock);
-
+	mutex_unlock(&udc->vbus_mutex);
 	return IRQ_HANDLED;
 }
 
@@ -1787,55 +1839,47 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 	unsigned long flags;
 
 	spin_lock_irqsave(&udc->lock, flags);
-
 	udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
 	udc->driver = driver;
 	spin_unlock_irqrestore(&udc->lock, flags);
 
-	ret = clk_prepare_enable(udc->pclk);
-	if (ret)
-		return ret;
-	ret = clk_prepare_enable(udc->hclk);
-	if (ret) {
-		clk_disable_unprepare(udc->pclk);
-		return ret;
-	}
+	mutex_lock(&udc->vbus_mutex);
 
-	udc->vbus_prev = 0;
 	if (gpio_is_valid(udc->vbus_pin))
 		enable_irq(gpio_to_irq(udc->vbus_pin));
 
 	/* If Vbus is present, enable the controller and wait for reset */
-	spin_lock_irqsave(&udc->lock, flags);
-	if (vbus_is_present(udc) && udc->vbus_prev == 0) {
-		toggle_bias(udc, 1);
-		usba_writel(udc, CTRL, USBA_ENABLE_MASK);
-		usba_int_enb_set(udc, USBA_END_OF_RESET);
+	udc->vbus_prev = vbus_is_present(udc);
+	if (udc->vbus_prev) {
+		ret = usba_start(udc);
+		if (ret)
+			goto err;
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
 
+	mutex_unlock(&udc->vbus_mutex);
 	return 0;
+
+err:
+	if (gpio_is_valid(udc->vbus_pin))
+		disable_irq(gpio_to_irq(udc->vbus_pin));
+
+	mutex_unlock(&udc->vbus_mutex);
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+	udc->driver = NULL;
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
 }
 
 static int atmel_usba_stop(struct usb_gadget *gadget)
 {
 	struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
-	unsigned long flags;
 
 	if (gpio_is_valid(udc->vbus_pin))
 		disable_irq(gpio_to_irq(udc->vbus_pin));
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	reset_all_endpoints(udc);
-	spin_unlock_irqrestore(&udc->lock, flags);
-
-	/* This will also disable the DP pullup */
-	toggle_bias(udc, 0);
-	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
-
-	clk_disable_unprepare(udc->hclk);
-	clk_disable_unprepare(udc->pclk);
+	usba_stop(udc);
 
 	udc->driver = NULL;
 
@@ -2057,6 +2101,7 @@ static int usba_udc_probe(struct platform_device *pdev)
 		return PTR_ERR(hclk);
 
 	spin_lock_init(&udc->lock);
+	mutex_init(&udc->vbus_mutex);
 	udc->pdev = pdev;
 	udc->pclk = pclk;
 	udc->hclk = hclk;
@@ -2111,17 +2156,17 @@ static int usba_udc_probe(struct platform_device *pdev)
 
 	if (gpio_is_valid(udc->vbus_pin)) {
 		if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
-			ret = devm_request_irq(&pdev->dev,
-					gpio_to_irq(udc->vbus_pin),
-					usba_vbus_irq, 0,
+			irq_set_status_flags(gpio_to_irq(udc->vbus_pin),
+					IRQ_NOAUTOEN);
+			ret = devm_request_threaded_irq(&pdev->dev,
+					gpio_to_irq(udc->vbus_pin), NULL,
+					usba_vbus_irq_thread, IRQF_ONESHOT,
 					"atmel_usba_udc", udc);
 			if (ret) {
 				udc->vbus_pin = -ENODEV;
 				dev_warn(&udc->pdev->dev,
 					 "failed to request vbus irq; "
 					 "assuming always on\n");
-			} else {
-				disable_irq(gpio_to_irq(udc->vbus_pin));
 			}
 		} else {
 			/* gpio_request fail so use -EINVAL for gpio_is_valid */
@@ -2132,6 +2177,7 @@ static int usba_udc_probe(struct platform_device *pdev)
 	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (ret)
 		return ret;
+	device_init_wakeup(&pdev->dev, 1);
 
 	usba_init_debugfs(udc);
 	for (i = 1; i < udc->num_ep; i++)
@@ -2147,6 +2193,7 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 
 	udc = platform_get_drvdata(pdev);
 
+	device_init_wakeup(&pdev->dev, 0);
 	usb_del_gadget_udc(&udc->gadget);
 
 	for (i = 1; i < udc->num_ep; i++)
@@ -2156,10 +2203,65 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int usba_udc_suspend(struct device *dev)
+{
+	struct usba_udc *udc = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!udc->driver)
+		return 0;
+
+	mutex_lock(&udc->vbus_mutex);
+
+	if (!device_may_wakeup(dev)) {
+		usba_stop(udc);
+		goto out;
+	}
+
+	/*
+	 * Device may wake up. We stay clocked if we failed
+	 * to request vbus irq, assuming always on.
+	 */
+	if (gpio_is_valid(udc->vbus_pin)) {
+		usba_stop(udc);
+		enable_irq_wake(gpio_to_irq(udc->vbus_pin));
+	}
+
+out:
+	mutex_unlock(&udc->vbus_mutex);
+	return 0;
+}
+
+static int usba_udc_resume(struct device *dev)
+{
+	struct usba_udc *udc = dev_get_drvdata(dev);
+
+	/* Not started */
+	if (!udc->driver)
+		return 0;
+
+	if (device_may_wakeup(dev) && gpio_is_valid(udc->vbus_pin))
+		disable_irq_wake(gpio_to_irq(udc->vbus_pin));
+
+	/* If Vbus is present, enable the controller and wait for reset */
+	mutex_lock(&udc->vbus_mutex);
+	udc->vbus_prev = vbus_is_present(udc);
+	if (udc->vbus_prev)
+		usba_start(udc);
+	mutex_unlock(&udc->vbus_mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(usba_udc_pm_ops, usba_udc_suspend, usba_udc_resume);
+
 static struct platform_driver udc_driver = {
 	.remove		= __exit_p(usba_udc_remove),
 	.driver		= {
 		.name		= "atmel_usba_udc",
+		.pm		= &usba_udc_pm_ops,
 		.of_match_table	= of_match_ptr(atmel_udc_dt_ids),
 	},
 };
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h
index 497cd18836f3..ea448a344767 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.h
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.h
@@ -191,18 +191,28 @@
 	 | USBA_BF(name, value))
 
 /* Register access macros */
+#ifdef CONFIG_AVR32
+#define usba_io_readl	__raw_readl
+#define usba_io_writel	__raw_writel
+#define usba_io_writew	__raw_writew
+#else
+#define usba_io_readl	readl_relaxed
+#define usba_io_writel	writel_relaxed
+#define usba_io_writew	writew_relaxed
+#endif
+
 #define usba_readl(udc, reg)					\
-	__raw_readl((udc)->regs + USBA_##reg)
+	usba_io_readl((udc)->regs + USBA_##reg)
 #define usba_writel(udc, reg, value)				\
-	__raw_writel((value), (udc)->regs + USBA_##reg)
+	usba_io_writel((value), (udc)->regs + USBA_##reg)
 #define usba_ep_readl(ep, reg)					\
-	__raw_readl((ep)->ep_regs + USBA_EPT_##reg)
+	usba_io_readl((ep)->ep_regs + USBA_EPT_##reg)
 #define usba_ep_writel(ep, reg, value)				\
-	__raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
+	usba_io_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
 #define usba_dma_readl(ep, reg)					\
-	__raw_readl((ep)->dma_regs + USBA_DMA_##reg)
+	usba_io_readl((ep)->dma_regs + USBA_DMA_##reg)
 #define usba_dma_writel(ep, reg, value)				\
-	__raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
+	usba_io_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
 
 /* Calculate base address for a given endpoint or DMA controller */
 #define USBA_EPT_BASE(x)	(0x100 + (x) * 0x20)
@@ -313,6 +323,9 @@ struct usba_udc {
 	/* Protect hw registers from concurrent modifications */
 	spinlock_t lock;
 
+	/* Mutex to prevent concurrent start or stop */
+	struct mutex vbus_mutex;
+
 	void __iomem *regs;
 	void __iomem *fifo;
 
@@ -328,6 +341,7 @@ struct usba_udc {
 	struct clk *hclk;
 	struct usba_ep *usba_ep;
 	bool bias_pulse_needed;
+	bool clocked;
 
 	u16 devstatus;
 
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 8dda48445f6f..181112c88f43 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1923,7 +1923,7 @@ static inline void
 ss_hub_descriptor(struct usb_hub_descriptor *desc)
 {
 	memset(desc, 0, sizeof *desc);
-	desc->bDescriptorType = 0x2a;
+	desc->bDescriptorType = USB_DT_SS_HUB;
 	desc->bDescLength = 12;
 	desc->wHubCharacteristics = cpu_to_le16(
 			HUB_CHAR_INDV_PORT_LPSM |
@@ -1936,7 +1936,7 @@ ss_hub_descriptor(struct usb_hub_descriptor *desc)
 static inline void hub_descriptor(struct usb_hub_descriptor *desc)
 {
 	memset(desc, 0, sizeof *desc);
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bDescLength = 9;
 	desc->wHubCharacteristics = cpu_to_le16(
 			HUB_CHAR_INDV_PORT_LPSM |
@@ -2631,7 +2631,7 @@ static int __init init(void)
 		return -EINVAL;
 
 	if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) {
-		pr_err("Number of emulated UDC must be in range of 1…%d\n",
+		pr_err("Number of emulated UDC must be in range of 1...%d\n",
 				MAX_NUM_UDC);
 		return -EINVAL;
 	}
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 5b9176e7202a..9e8d842e8c08 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -1024,35 +1024,79 @@ static const char proc_node_name [] = "driver/udc";
 static void dump_intmask(struct seq_file *m, const char *label, u32 mask)
 {
 	/* int_status is the same format ... */
-	seq_printf(m,
-		"%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
-		label, mask,
-		(mask & INT_PWRDETECT) ? " power" : "",
-		(mask & INT_SYSERROR) ? " sys" : "",
-		(mask & INT_MSTRDEND) ? " in-dma" : "",
-		(mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
-
-		(mask & INT_MSTWREND) ? " out-dma" : "",
-		(mask & INT_MSTWRSET) ? " wrset" : "",
-		(mask & INT_ERR) ? " err" : "",
-		(mask & INT_SOF) ? " sof" : "",
-
-		(mask & INT_EP3NAK) ? " ep3nak" : "",
-		(mask & INT_EP2NAK) ? " ep2nak" : "",
-		(mask & INT_EP1NAK) ? " ep1nak" : "",
-		(mask & INT_EP3DATASET) ? " ep3" : "",
-
-		(mask & INT_EP2DATASET) ? " ep2" : "",
-		(mask & INT_EP1DATASET) ? " ep1" : "",
-		(mask & INT_STATUSNAK) ? " ep0snak" : "",
-		(mask & INT_STATUS) ? " ep0status" : "",
-
-		(mask & INT_SETUP) ? " setup" : "",
-		(mask & INT_ENDPOINT0) ? " ep0" : "",
-		(mask & INT_USBRESET) ? " reset" : "",
-		(mask & INT_SUSPEND) ? " suspend" : "");
+	seq_printf(m, "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
+		   label, mask,
+		   (mask & INT_PWRDETECT) ? " power" : "",
+		   (mask & INT_SYSERROR) ? " sys" : "",
+		   (mask & INT_MSTRDEND) ? " in-dma" : "",
+		   (mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
+
+		   (mask & INT_MSTWREND) ? " out-dma" : "",
+		   (mask & INT_MSTWRSET) ? " wrset" : "",
+		   (mask & INT_ERR) ? " err" : "",
+		   (mask & INT_SOF) ? " sof" : "",
+
+		   (mask & INT_EP3NAK) ? " ep3nak" : "",
+		   (mask & INT_EP2NAK) ? " ep2nak" : "",
+		   (mask & INT_EP1NAK) ? " ep1nak" : "",
+		   (mask & INT_EP3DATASET) ? " ep3" : "",
+
+		   (mask & INT_EP2DATASET) ? " ep2" : "",
+		   (mask & INT_EP1DATASET) ? " ep1" : "",
+		   (mask & INT_STATUSNAK) ? " ep0snak" : "",
+		   (mask & INT_STATUS) ? " ep0status" : "",
+
+		   (mask & INT_SETUP) ? " setup" : "",
+		   (mask & INT_ENDPOINT0) ? " ep0" : "",
+		   (mask & INT_USBRESET) ? " reset" : "",
+		   (mask & INT_SUSPEND) ? " suspend" : "");
+}
+
+static const char *udc_ep_state(enum ep0state state)
+{
+	switch (state) {
+	case EP0_DISCONNECT:
+		return "ep0_disconnect";
+	case EP0_IDLE:
+		return "ep0_idle";
+	case EP0_IN:
+		return "ep0_in";
+	case EP0_OUT:
+		return "ep0_out";
+	case EP0_STATUS:
+		return "ep0_status";
+	case EP0_STALL:
+		return "ep0_stall";
+	case EP0_SUSPEND:
+		return "ep0_suspend";
+	}
+
+	return "ep0_?";
 }
 
+static const char *udc_ep_status(u32 status)
+{
+	switch (status & EPxSTATUS_EP_MASK) {
+	case EPxSTATUS_EP_READY:
+		return "ready";
+	case EPxSTATUS_EP_DATAIN:
+		return "packet";
+	case EPxSTATUS_EP_FULL:
+		return "full";
+	case EPxSTATUS_EP_TX_ERR:	/* host will retry */
+		return "tx_err";
+	case EPxSTATUS_EP_RX_ERR:
+		return "rx_err";
+	case EPxSTATUS_EP_BUSY:		/* ep0 only */
+		return "busy";
+	case EPxSTATUS_EP_STALL:
+		return "stall";
+	case EPxSTATUS_EP_INVALID:	/* these "can't happen" */
+		return "invalid";
+	}
+
+	return "?";
+}
 
 static int udc_proc_read(struct seq_file *m, void *v)
 {
@@ -1068,29 +1112,18 @@ static int udc_proc_read(struct seq_file *m, void *v)
 	tmp = readl(&regs->power_detect);
 	is_usb_connected = tmp & PW_DETECT;
 	seq_printf(m,
-		"%s - %s\n"
-		"%s version: %s %s\n"
-		"Gadget driver: %s\n"
-		"Host %s, %s\n"
-		"\n",
-		pci_name(dev->pdev), driver_desc,
-		driver_name, DRIVER_VERSION, dmastr(),
-		dev->driver ? dev->driver->driver.name : "(none)",
-		is_usb_connected
-			? ((tmp & PW_PULLUP) ? "full speed" : "powered")
-			: "disconnected",
-		({const char *state;
-		switch(dev->ep0state){
-		case EP0_DISCONNECT:	state = "ep0_disconnect"; break;
-		case EP0_IDLE:		state = "ep0_idle"; break;
-		case EP0_IN:		state = "ep0_in"; break;
-		case EP0_OUT:		state = "ep0_out"; break;
-		case EP0_STATUS:	state = "ep0_status"; break;
-		case EP0_STALL:		state = "ep0_stall"; break;
-		case EP0_SUSPEND:	state = "ep0_suspend"; break;
-		default:		state = "ep0_?"; break;
-		} state; })
-		);
+		   "%s - %s\n"
+		   "%s version: %s %s\n"
+		   "Gadget driver: %s\n"
+		   "Host %s, %s\n"
+		   "\n",
+		   pci_name(dev->pdev), driver_desc,
+		   driver_name, DRIVER_VERSION, dmastr(),
+		   dev->driver ? dev->driver->driver.name : "(none)",
+		   is_usb_connected
+			   ? ((tmp & PW_PULLUP) ? "full speed" : "powered")
+			   : "disconnected",
+		   udc_ep_state(dev->ep0state));
 
 	dump_intmask(m, "int_status", readl(&regs->int_status));
 	dump_intmask(m, "int_enable", readl(&regs->int_enable));
@@ -1099,31 +1132,30 @@ static int udc_proc_read(struct seq_file *m, void *v)
 		goto done;
 
 	/* registers for (active) device and ep0 */
-	if (seq_printf(m, "\nirqs %lu\ndataset %02x "
-			"single.bcs %02x.%02x state %x addr %u\n",
-			dev->irqs, readl(&regs->DataSet),
-			readl(&regs->EPxSingle), readl(&regs->EPxBCS),
-			readl(&regs->UsbState),
-			readl(&regs->address)) < 0)
+	seq_printf(m, "\nirqs %lu\ndataset %02x single.bcs %02x.%02x state %x addr %u\n",
+		   dev->irqs, readl(&regs->DataSet),
+		   readl(&regs->EPxSingle), readl(&regs->EPxBCS),
+		   readl(&regs->UsbState),
+		   readl(&regs->address));
+	if (seq_has_overflowed(m))
 		goto done;
 
 	tmp = readl(&regs->dma_master);
-	if (seq_printf(m,
-		"dma %03X =" EIGHTBITS "%s %s\n", tmp,
-		(tmp & MST_EOPB_DIS) ? " eopb-" : "",
-		(tmp & MST_EOPB_ENA) ? " eopb+" : "",
-		(tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
-		(tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
-
-		(tmp & MST_RD_EOPB) ? " eopb" : "",
-		(tmp & MST_RD_RESET) ? " in_reset" : "",
-		(tmp & MST_WR_RESET) ? " out_reset" : "",
-		(tmp & MST_RD_ENA) ? " IN" : "",
-
-		(tmp & MST_WR_ENA) ? " OUT" : "",
-		(tmp & MST_CONNECTION)
-			? "ep1in/ep2out"
-			: "ep1out/ep2in") < 0)
+	seq_printf(m, "dma %03X =" EIGHTBITS "%s %s\n",
+		   tmp,
+		   (tmp & MST_EOPB_DIS) ? " eopb-" : "",
+		   (tmp & MST_EOPB_ENA) ? " eopb+" : "",
+		   (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
+		   (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
+
+		   (tmp & MST_RD_EOPB) ? " eopb" : "",
+		   (tmp & MST_RD_RESET) ? " in_reset" : "",
+		   (tmp & MST_WR_RESET) ? " out_reset" : "",
+		   (tmp & MST_RD_ENA) ? " IN" : "",
+
+		   (tmp & MST_WR_ENA) ? " OUT" : "",
+		   (tmp & MST_CONNECTION) ? "ep1in/ep2out" : "ep1out/ep2in");
+	if (seq_has_overflowed(m))
 		goto done;
 
 	/* dump endpoint queues */
@@ -1135,44 +1167,23 @@ static int udc_proc_read(struct seq_file *m, void *v)
 			continue;
 
 		tmp = readl(ep->reg_status);
-		if (seq_printf(m,
-			"%s %s max %u %s, irqs %lu, "
-			"status %02x (%s) " FOURBITS "\n",
-			ep->ep.name,
-			ep->is_in ? "in" : "out",
-			ep->ep.maxpacket,
-			ep->dma ? "dma" : "pio",
-			ep->irqs,
-			tmp, ({ char *s;
-			switch (tmp & EPxSTATUS_EP_MASK) {
-			case EPxSTATUS_EP_READY:
-				s = "ready"; break;
-			case EPxSTATUS_EP_DATAIN:
-				s = "packet"; break;
-			case EPxSTATUS_EP_FULL:
-				s = "full"; break;
-			case EPxSTATUS_EP_TX_ERR:	// host will retry
-				s = "tx_err"; break;
-			case EPxSTATUS_EP_RX_ERR:
-				s = "rx_err"; break;
-			case EPxSTATUS_EP_BUSY:		/* ep0 only */
-				s = "busy"; break;
-			case EPxSTATUS_EP_STALL:
-				s = "stall"; break;
-			case EPxSTATUS_EP_INVALID:	// these "can't happen"
-				s = "invalid"; break;
-			default:
-				s = "?"; break;
-			} s; }),
-			(tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
-			(tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
-			(tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
-			(tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""
-			) < 0)
+		seq_printf(m, "%s %s max %u %s, irqs %lu, status %02x (%s) " FOURBITS "\n",
+			   ep->ep.name,
+			   ep->is_in ? "in" : "out",
+			   ep->ep.maxpacket,
+			   ep->dma ? "dma" : "pio",
+			   ep->irqs,
+			   tmp, udc_ep_status(tmp),
+			   (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
+			   (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
+			   (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
+			   (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : "");
+		if (seq_has_overflowed(m))
 			goto done;
 
 		if (list_empty(&ep->queue)) {
-			if (seq_puts(m, "\t(nothing queued)\n") < 0)
+			seq_puts(m, "\t(nothing queued)\n");
+			if (seq_has_overflowed(m))
 				goto done;
 			continue;
 		}
@@ -1187,10 +1198,10 @@ static int udc_proc_read(struct seq_file *m, void *v)
 			} else
 				tmp = req->req.actual;
 
-			if (seq_printf(m,
-				"\treq %p len %u/%u buf %p\n",
-				&req->req, tmp, req->req.length,
-				req->req.buf) < 0)
+			seq_printf(m, "\treq %p len %u/%u buf %p\n",
+				   &req->req, tmp, req->req.length,
+				   req->req.buf);
+			if (seq_has_overflowed(m))
 				goto done;
 		}
 	}
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 27fd41333f71..3b6a7852822d 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -1803,23 +1803,14 @@ static int lpc32xx_ep_queue(struct usb_ep *_ep,
 	req = container_of(_req, struct lpc32xx_request, req);
 	ep = container_of(_ep, struct lpc32xx_ep, ep);
 
-	if (!_req || !_req->complete || !_req->buf ||
+	if (!_ep || !_req || !_req->complete || !_req->buf ||
 	    !list_empty(&req->queue))
 		return -EINVAL;
 
 	udc = ep->udc;
 
-	if (!_ep) {
-		dev_dbg(udc->dev, "invalid ep\n");
-		return -EINVAL;
-	}
-
-
-	if ((!udc) || (!udc->driver) ||
-	    (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
-		dev_dbg(udc->dev, "invalid device\n");
-		return -EINVAL;
-	}
+	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -EPIPE;
 
 	if (ep->lep) {
 		struct lpc32xx_usbd_dd_gad *dd;
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index d2c0bf65e345..9871b90195ad 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -80,6 +80,13 @@ static const char *const ep_name[] = {
 	"ep-e", "ep-f", "ep-g", "ep-h",
 };
 
+/* Endpoint names for usb3380 advance mode */
+static const char *const ep_name_adv[] = {
+	ep0name,
+	"ep1in", "ep2out", "ep3in", "ep4out",
+	"ep1out", "ep2in", "ep3out", "ep4in",
+};
+
 /* mode 0 == ep-{a,b,c,d} 1K fifo each
  * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
  * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable
@@ -138,31 +145,44 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	u32			max, tmp;
 	unsigned long		flags;
 	static const u32 ep_key[9] = { 1, 0, 1, 0, 1, 1, 0, 1, 0 };
+	int ret = 0;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
 	if (!_ep || !desc || ep->desc || _ep->name == ep0name ||
-			desc->bDescriptorType != USB_DT_ENDPOINT)
+			desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_err("%s: failed at line=%d\n", __func__, __LINE__);
 		return -EINVAL;
+	}
 	dev = ep->dev;
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		ret = -ESHUTDOWN;
+		goto print_err;
+	}
 
 	/* erratum 0119 workaround ties up an endpoint number */
-	if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE)
-		return -EDOM;
+	if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE) {
+		ret = -EDOM;
+		goto print_err;
+	}
 
 	if (dev->quirks & PLX_SUPERSPEED) {
-		if ((desc->bEndpointAddress & 0x0f) >= 0x0c)
-			return -EDOM;
+		if ((desc->bEndpointAddress & 0x0f) >= 0x0c) {
+			ret = -EDOM;
+			goto print_err;
+		}
 		ep->is_in = !!usb_endpoint_dir_in(desc);
-		if (dev->enhanced_mode && ep->is_in && ep_key[ep->num])
-			return -EINVAL;
+		if (dev->enhanced_mode && ep->is_in && ep_key[ep->num]) {
+			ret = -EINVAL;
+			goto print_err;
+		}
 	}
 
 	/* sanity check ep-e/ep-f since their fifos are small */
 	max = usb_endpoint_maxp(desc) & 0x1fff;
-	if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY))
-		return -ERANGE;
+	if (ep->num > 4 && max > 64 && (dev->quirks & PLX_LEGACY)) {
+		ret = -ERANGE;
+		goto print_err;
+	}
 
 	spin_lock_irqsave(&dev->lock, flags);
 	_ep->maxpacket = max & 0x7ff;
@@ -192,7 +212,8 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		    (dev->gadget.speed == USB_SPEED_HIGH && max != 512) ||
 		    (dev->gadget.speed == USB_SPEED_FULL && max > 64)) {
 			spin_unlock_irqrestore(&dev->lock, flags);
-			return -ERANGE;
+			ret = -ERANGE;
+			goto print_err;
 		}
 	}
 	ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC);
@@ -271,7 +292,11 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 
 	/* pci writes may still be posted */
 	spin_unlock_irqrestore(&dev->lock, flags);
-	return 0;
+	return ret;
+
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret);
+	return ret;
 }
 
 static int handshake(u32 __iomem *ptr, u32 mask, u32 done, int usec)
@@ -426,9 +451,10 @@ static int net2280_disable(struct usb_ep *_ep)
 	unsigned long		flags;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || !ep->desc || _ep->name == ep0name)
+	if (!_ep || !ep->desc || _ep->name == ep0name) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return -EINVAL;
-
+	}
 	spin_lock_irqsave(&ep->dev->lock, flags);
 	nuke(ep);
 
@@ -458,8 +484,10 @@ static struct usb_request
 	struct net2280_ep	*ep;
 	struct net2280_request	*req;
 
-	if (!_ep)
+	if (!_ep) {
+		pr_err("%s: Invalid ep\n", __func__);
 		return NULL;
+	}
 	ep = container_of(_ep, struct net2280_ep, ep);
 
 	req = kzalloc(sizeof(*req), gfp_flags);
@@ -491,8 +519,11 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req)
 	struct net2280_request	*req;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || !_req)
+	if (!_ep || !_req) {
+		dev_err(&ep->dev->pdev->dev, "%s: Inavlid ep=%p or req=%p\n",
+							__func__, _ep, _req);
 		return;
+	}
 
 	req = container_of(_req, struct net2280_request, req);
 	WARN_ON(!list_empty(&req->queue));
@@ -896,35 +927,44 @@ net2280_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 	struct net2280_ep	*ep;
 	struct net2280		*dev;
 	unsigned long		flags;
+	int ret = 0;
 
 	/* we always require a cpu-view buffer, so that we can
 	 * always use pio (as fallback or whatever).
 	 */
-	req = container_of(_req, struct net2280_request, req);
-	if (!_req || !_req->complete || !_req->buf ||
-				!list_empty(&req->queue))
-		return -EINVAL;
-	if (_req->length > (~0 & DMA_BYTE_COUNT_MASK))
-		return -EDOM;
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0))
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return -EINVAL;
+	}
+	req = container_of(_req, struct net2280_request, req);
+	if (!_req || !_req->complete || !_req->buf ||
+				!list_empty(&req->queue)) {
+		ret = -EINVAL;
+		goto print_err;
+	}
+	if (_req->length > (~0 & DMA_BYTE_COUNT_MASK)) {
+		ret = -EDOM;
+		goto print_err;
+	}
 	dev = ep->dev;
-	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		ret = -ESHUTDOWN;
+		goto print_err;
+	}
 
 	/* FIXME implement PIO fallback for ZLPs with DMA */
-	if (ep->dma && _req->length == 0)
-		return -EOPNOTSUPP;
+	if (ep->dma && _req->length == 0) {
+		ret = -EOPNOTSUPP;
+		goto print_err;
+	}
 
 	/* set up dma mapping in case the caller didn't */
 	if (ep->dma) {
-		int ret;
-
 		ret = usb_gadget_map_request(&dev->gadget, _req,
 				ep->is_in);
 		if (ret)
-			return ret;
+			goto print_err;
 	}
 
 	ep_vdbg(dev, "%s queue req %p, len %d buf %p\n",
@@ -1013,7 +1053,11 @@ done:
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	/* pci writes may still be posted */
-	return 0;
+	return ret;
+
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, ret);
+	return ret;
 }
 
 static inline void
@@ -1134,8 +1178,11 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	int			stopped;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0) || !_req)
+	if (!_ep || (!ep->desc && ep->num != 0) || !_req) {
+		pr_err("%s: Invalid ep=%p or ep->desc or req=%p\n",
+						__func__, _ep, _req);
 		return -EINVAL;
+	}
 
 	spin_lock_irqsave(&ep->dev->lock, flags);
 	stopped = ep->stopped;
@@ -1157,6 +1204,8 @@ static int net2280_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 	}
 	if (&req->req != _req) {
 		spin_unlock_irqrestore(&ep->dev->lock, flags);
+		dev_err(&ep->dev->pdev->dev, "%s: Request mismatch\n",
+								__func__);
 		return -EINVAL;
 	}
 
@@ -1214,20 +1263,28 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
 	int			retval = 0;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0))
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return -EINVAL;
-	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
-		return -ESHUTDOWN;
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		retval = -ESHUTDOWN;
+		goto print_err;
+	}
 	if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03)
-						== USB_ENDPOINT_XFER_ISOC)
-		return -EINVAL;
+						== USB_ENDPOINT_XFER_ISOC) {
+		retval = -EINVAL;
+		goto print_err;
+	}
 
 	spin_lock_irqsave(&ep->dev->lock, flags);
-	if (!list_empty(&ep->queue))
+	if (!list_empty(&ep->queue)) {
 		retval = -EAGAIN;
-	else if (ep->is_in && value && net2280_fifo_status(_ep) != 0)
+		goto print_unlock;
+	} else if (ep->is_in && value && net2280_fifo_status(_ep) != 0) {
 		retval = -EAGAIN;
-	else {
+		goto print_unlock;
+	} else {
 		ep_vdbg(ep->dev, "%s %s %s\n", _ep->name,
 				value ? "set" : "clear",
 				wedged ? "wedge" : "halt");
@@ -1251,6 +1308,12 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
 	spin_unlock_irqrestore(&ep->dev->lock, flags);
 
 	return retval;
+
+print_unlock:
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+print_err:
+	dev_err(&ep->dev->pdev->dev, "%s: error=%d\n", __func__, retval);
+	return retval;
 }
 
 static int net2280_set_halt(struct usb_ep *_ep, int value)
@@ -1260,8 +1323,10 @@ static int net2280_set_halt(struct usb_ep *_ep, int value)
 
 static int net2280_set_wedge(struct usb_ep *_ep)
 {
-	if (!_ep || _ep->name == ep0name)
+	if (!_ep || _ep->name == ep0name) {
+		pr_err("%s: Invalid ep=%p or ep0\n", __func__, _ep);
 		return -EINVAL;
+	}
 	return net2280_set_halt_and_wedge(_ep, 1, 1);
 }
 
@@ -1271,14 +1336,22 @@ static int net2280_fifo_status(struct usb_ep *_ep)
 	u32			avail;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0))
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return -ENODEV;
-	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(&ep->dev->pdev->dev,
+			"%s: Invalid driver=%p or speed=%d\n",
+			__func__, ep->dev->driver, ep->dev->gadget.speed);
 		return -ESHUTDOWN;
+	}
 
 	avail = readl(&ep->regs->ep_avail) & (BIT(12) - 1);
-	if (avail > ep->fifo_size)
+	if (avail > ep->fifo_size) {
+		dev_err(&ep->dev->pdev->dev, "%s: Fifo overflow\n", __func__);
 		return -EOVERFLOW;
+	}
 	if (ep->is_in)
 		avail = ep->fifo_size - avail;
 	return avail;
@@ -1289,10 +1362,16 @@ static void net2280_fifo_flush(struct usb_ep *_ep)
 	struct net2280_ep	*ep;
 
 	ep = container_of(_ep, struct net2280_ep, ep);
-	if (!_ep || (!ep->desc && ep->num != 0))
+	if (!_ep || (!ep->desc && ep->num != 0)) {
+		pr_err("%s: Invalid ep=%p or ep->desc\n", __func__, _ep);
 		return;
-	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+	}
+	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_err(&ep->dev->pdev->dev,
+			"%s: Invalid driver=%p or speed=%d\n",
+			__func__, ep->dev->driver, ep->dev->gadget.speed);
 		return;
+	}
 
 	writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat);
 	(void) readl(&ep->regs->ep_rsp);
@@ -1977,7 +2056,7 @@ static void usb_reinit_338x(struct net2280 *dev)
 	for (i = 0; i < dev->n_ep; i++) {
 		struct net2280_ep *ep = &dev->ep[i];
 
-		ep->ep.name = ep_name[i];
+		ep->ep.name = dev->enhanced_mode ? ep_name_adv[i] : ep_name[i];
 		ep->dev = dev;
 		ep->num = i;
 
@@ -1989,11 +2068,9 @@ static void usb_reinit_338x(struct net2280 *dev)
 			ep->regs = (struct net2280_ep_regs __iomem *)
 				(((void __iomem *)&dev->epregs[ne[i]]) +
 				ep_reg_addr[i]);
-			ep->fiforegs = &dev->fiforegs[i];
 		} else {
 			ep->cfg = &dev->epregs[i];
 			ep->regs = &dev->epregs[i];
-			ep->fiforegs = &dev->fiforegs[i];
 		}
 
 		ep->fifo_size = (i != 0) ? 2048 : 512;
@@ -2186,7 +2263,6 @@ static int net2280_start(struct usb_gadget *_gadget,
 		dev->ep[i].irqs = 0;
 
 	/* hook up the driver ... */
-	dev->softconnect = 1;
 	driver->driver.bus = NULL;
 	dev->driver = driver;
 
@@ -3052,6 +3128,8 @@ next_endpoints:
 		BIT(PCI_RETRY_ABORT_INTERRUPT))
 
 static void handle_stat1_irqs(struct net2280 *dev, u32 stat)
+__releases(dev->lock)
+__acquires(dev->lock)
 {
 	struct net2280_ep	*ep;
 	u32			tmp, num, mask, scratch;
@@ -3373,8 +3451,6 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		u32 usbstat;
 		dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *)
 							(base + 0x00b4);
-		dev->fiforegs = (struct usb338x_fifo_regs __iomem *)
-							(base + 0x0500);
 		dev->llregs = (struct usb338x_ll_regs __iomem *)
 							(base + 0x0700);
 		dev->ll_lfps_regs = (struct usb338x_ll_lfps_regs __iomem *)
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index ac8d5a20a378..4dff60d34f73 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -96,7 +96,6 @@ struct net2280_ep {
 	struct net2280_ep_regs			__iomem *regs;
 	struct net2280_dma_regs			__iomem *dma;
 	struct net2280_dma			*dummy;
-	struct usb338x_fifo_regs __iomem *fiforegs;
 	dma_addr_t				td_dma;	/* of dummy */
 	struct net2280				*dev;
 	unsigned long				irqs;
@@ -181,7 +180,6 @@ struct net2280 {
 	struct net2280_dma_regs		__iomem *dma;
 	struct net2280_dep_regs		__iomem *dep;
 	struct net2280_ep_regs		__iomem *epregs;
-	struct usb338x_fifo_regs	__iomem *fiforegs;
 	struct usb338x_ll_regs		__iomem *llregs;
 	struct usb338x_ll_lfps_regs	__iomem *ll_lfps_regs;
 	struct usb338x_ll_tsn_regs	__iomem *ll_tsn_regs;
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 6a855fc9bd84..b51226abade6 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -93,50 +93,46 @@ static void handle_ep(struct pxa_ep *ep);
 static int state_dbg_show(struct seq_file *s, void *p)
 {
 	struct pxa_udc *udc = s->private;
-	int pos = 0, ret;
 	u32 tmp;
 
-	ret = -ENODEV;
 	if (!udc->driver)
-		goto out;
+		return -ENODEV;
 
 	/* basic device status */
-	pos += seq_printf(s, DRIVER_DESC "\n"
-			 "%s version: %s\nGadget driver: %s\n",
-			 driver_name, DRIVER_VERSION,
-			 udc->driver ? udc->driver->driver.name : "(none)");
+	seq_printf(s, DRIVER_DESC "\n"
+		   "%s version: %s\n"
+		   "Gadget driver: %s\n",
+		   driver_name, DRIVER_VERSION,
+		   udc->driver ? udc->driver->driver.name : "(none)");
 
 	tmp = udc_readl(udc, UDCCR);
-	pos += seq_printf(s,
-			 "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), "
-			 "con=%d,inter=%d,altinter=%d\n", tmp,
-			 (tmp & UDCCR_OEN) ? " oen":"",
-			 (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
-			 (tmp & UDCCR_AHNP) ? " rem" : "",
-			 (tmp & UDCCR_BHNP) ? " rstir" : "",
-			 (tmp & UDCCR_DWRE) ? " dwre" : "",
-			 (tmp & UDCCR_SMAC) ? " smac" : "",
-			 (tmp & UDCCR_EMCE) ? " emce" : "",
-			 (tmp & UDCCR_UDR) ? " udr" : "",
-			 (tmp & UDCCR_UDA) ? " uda" : "",
-			 (tmp & UDCCR_UDE) ? " ude" : "",
-			 (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
-			 (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
-			 (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
+	seq_printf(s,
+		   "udccr=0x%0x(%s%s%s%s%s%s%s%s%s%s), con=%d,inter=%d,altinter=%d\n",
+		   tmp,
+		   (tmp & UDCCR_OEN) ? " oen":"",
+		   (tmp & UDCCR_AALTHNP) ? " aalthnp":"",
+		   (tmp & UDCCR_AHNP) ? " rem" : "",
+		   (tmp & UDCCR_BHNP) ? " rstir" : "",
+		   (tmp & UDCCR_DWRE) ? " dwre" : "",
+		   (tmp & UDCCR_SMAC) ? " smac" : "",
+		   (tmp & UDCCR_EMCE) ? " emce" : "",
+		   (tmp & UDCCR_UDR) ? " udr" : "",
+		   (tmp & UDCCR_UDA) ? " uda" : "",
+		   (tmp & UDCCR_UDE) ? " ude" : "",
+		   (tmp & UDCCR_ACN) >> UDCCR_ACN_S,
+		   (tmp & UDCCR_AIN) >> UDCCR_AIN_S,
+		   (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S);
 	/* registers for device and ep0 */
-	pos += seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n",
-			udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1));
-	pos += seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n",
-			udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1));
-	pos += seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR));
-	pos += seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, "
-			"reconfig=%lu\n",
-			udc->stats.irqs_reset, udc->stats.irqs_suspend,
-			udc->stats.irqs_resume, udc->stats.irqs_reconfig);
-
-	ret = 0;
-out:
-	return ret;
+	seq_printf(s, "udcicr0=0x%08x udcicr1=0x%08x\n",
+		   udc_readl(udc, UDCICR0), udc_readl(udc, UDCICR1));
+	seq_printf(s, "udcisr0=0x%08x udcisr1=0x%08x\n",
+		   udc_readl(udc, UDCISR0), udc_readl(udc, UDCISR1));
+	seq_printf(s, "udcfnr=%d\n", udc_readl(udc, UDCFNR));
+	seq_printf(s, "irqs: reset=%lu, suspend=%lu, resume=%lu, reconfig=%lu\n",
+		   udc->stats.irqs_reset, udc->stats.irqs_suspend,
+		   udc->stats.irqs_resume, udc->stats.irqs_reconfig);
+
+	return 0;
 }
 
 static int queues_dbg_show(struct seq_file *s, void *p)
@@ -144,75 +140,67 @@ static int queues_dbg_show(struct seq_file *s, void *p)
 	struct pxa_udc *udc = s->private;
 	struct pxa_ep *ep;
 	struct pxa27x_request *req;
-	int pos = 0, i, maxpkt, ret;
+	int i, maxpkt;
 
-	ret = -ENODEV;
 	if (!udc->driver)
-		goto out;
+		return -ENODEV;
 
 	/* dump endpoint queues */
 	for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
 		ep = &udc->pxa_ep[i];
 		maxpkt = ep->fifo_size;
-		pos += seq_printf(s,  "%-12s max_pkt=%d %s\n",
-				EPNAME(ep), maxpkt, "pio");
+		seq_printf(s,  "%-12s max_pkt=%d %s\n",
+			   EPNAME(ep), maxpkt, "pio");
 
 		if (list_empty(&ep->queue)) {
-			pos += seq_printf(s, "\t(nothing queued)\n");
+			seq_puts(s, "\t(nothing queued)\n");
 			continue;
 		}
 
 		list_for_each_entry(req, &ep->queue, queue) {
-			pos += seq_printf(s,  "\treq %p len %d/%d buf %p\n",
-					&req->req, req->req.actual,
-					req->req.length, req->req.buf);
+			seq_printf(s,  "\treq %p len %d/%d buf %p\n",
+				   &req->req, req->req.actual,
+				   req->req.length, req->req.buf);
 		}
 	}
 
-	ret = 0;
-out:
-	return ret;
+	return 0;
 }
 
 static int eps_dbg_show(struct seq_file *s, void *p)
 {
 	struct pxa_udc *udc = s->private;
 	struct pxa_ep *ep;
-	int pos = 0, i, ret;
+	int i;
 	u32 tmp;
 
-	ret = -ENODEV;
 	if (!udc->driver)
-		goto out;
+		return -ENODEV;
 
 	ep = &udc->pxa_ep[0];
 	tmp = udc_ep_readl(ep, UDCCSR);
-	pos += seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n", tmp,
-			 (tmp & UDCCSR0_SA) ? " sa" : "",
-			 (tmp & UDCCSR0_RNE) ? " rne" : "",
-			 (tmp & UDCCSR0_FST) ? " fst" : "",
-			 (tmp & UDCCSR0_SST) ? " sst" : "",
-			 (tmp & UDCCSR0_DME) ? " dme" : "",
-			 (tmp & UDCCSR0_IPR) ? " ipr" : "",
-			 (tmp & UDCCSR0_OPC) ? " opc" : "");
+	seq_printf(s, "udccsr0=0x%03x(%s%s%s%s%s%s%s)\n",
+		   tmp,
+		   (tmp & UDCCSR0_SA) ? " sa" : "",
+		   (tmp & UDCCSR0_RNE) ? " rne" : "",
+		   (tmp & UDCCSR0_FST) ? " fst" : "",
+		   (tmp & UDCCSR0_SST) ? " sst" : "",
+		   (tmp & UDCCSR0_DME) ? " dme" : "",
+		   (tmp & UDCCSR0_IPR) ? " ipr" : "",
+		   (tmp & UDCCSR0_OPC) ? " opc" : "");
 	for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
 		ep = &udc->pxa_ep[i];
 		tmp = i? udc_ep_readl(ep, UDCCR) : udc_readl(udc, UDCCR);
-		pos += seq_printf(s, "%-12s: "
-				"IN %lu(%lu reqs), OUT %lu(%lu reqs), "
-				"irqs=%lu, udccr=0x%08x, udccsr=0x%03x, "
-				"udcbcr=%d\n",
-				EPNAME(ep),
-				ep->stats.in_bytes, ep->stats.in_ops,
-				ep->stats.out_bytes, ep->stats.out_ops,
-				ep->stats.irqs,
-				tmp, udc_ep_readl(ep, UDCCSR),
-				udc_ep_readl(ep, UDCBCR));
+		seq_printf(s, "%-12s: IN %lu(%lu reqs), OUT %lu(%lu reqs), irqs=%lu, udccr=0x%08x, udccsr=0x%03x, udcbcr=%d\n",
+			   EPNAME(ep),
+			   ep->stats.in_bytes, ep->stats.in_ops,
+			   ep->stats.out_bytes, ep->stats.out_ops,
+			   ep->stats.irqs,
+			   tmp, udc_ep_readl(ep, UDCCSR),
+			   udc_ep_readl(ep, UDCBCR));
 	}
 
-	ret = 0;
-out:
-	return ret;
+	return 0;
 }
 
 static int eps_dbg_open(struct inode *inode, struct file *file)
@@ -2399,7 +2387,7 @@ static struct pxa_udc memory = {
 };
 
 #if defined(CONFIG_OF)
-static struct of_device_id udc_pxa_dt_ids[] = {
+static const struct of_device_id udc_pxa_dt_ids[] = {
 	{ .compatible = "marvell,pxa270-udc" },
 	{}
 };
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index 5a81cb086b99..d69c35558f68 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -35,6 +35,8 @@
  * @dev - the child device to the actual controller
  * @gadget - the gadget. For use by the class code
  * @list - for use by the udc class driver
+ * @vbus - for udcs who care about vbus status, this value is real vbus status;
+ * for udcs who do not care about vbus status, this value is always true
  *
  * This represents the internal data structure which is used by the UDC-class
  * to hold information about udc driver and gadget together.
@@ -44,6 +46,7 @@ struct usb_udc {
 	struct usb_gadget		*gadget;
 	struct device			dev;
 	struct list_head		list;
+	bool				vbus;
 };
 
 static struct class *udc_class;
@@ -128,21 +131,11 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
 
 static void usb_gadget_state_work(struct work_struct *work)
 {
-	struct usb_gadget	*gadget = work_to_gadget(work);
-	struct usb_udc		*udc = NULL;
-
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list)
-		if (udc->gadget == gadget)
-			goto found;
-	mutex_unlock(&udc_lock);
-
-	return;
-
-found:
-	mutex_unlock(&udc_lock);
+	struct usb_gadget *gadget = work_to_gadget(work);
+	struct usb_udc *udc = gadget->udc;
 
-	sysfs_notify(&udc->dev.kobj, NULL, "state");
+	if (udc)
+		sysfs_notify(&udc->dev.kobj, NULL, "state");
 }
 
 void usb_gadget_set_state(struct usb_gadget *gadget,
@@ -155,6 +148,34 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state);
 
 /* ------------------------------------------------------------------------- */
 
+static void usb_udc_connect_control(struct usb_udc *udc)
+{
+	if (udc->vbus)
+		usb_gadget_connect(udc->gadget);
+	else
+		usb_gadget_disconnect(udc->gadget);
+}
+
+/**
+ * usb_udc_vbus_handler - updates the udc core vbus status, and try to
+ * connect or disconnect gadget
+ * @gadget: The gadget which vbus change occurs
+ * @status: The vbus status
+ *
+ * The udc driver calls it when it wants to connect or disconnect gadget
+ * according to vbus status.
+ */
+void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
+{
+	struct usb_udc *udc = gadget->udc;
+
+	if (udc) {
+		udc->vbus = status;
+		usb_udc_connect_control(udc);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
+
 /**
  * usb_gadget_udc_reset - notifies the udc core that bus reset occurs
  * @gadget: The gadget which bus reset occurs
@@ -278,6 +299,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
 		goto err3;
 
 	udc->gadget = gadget;
+	gadget->udc = udc;
 
 	mutex_lock(&udc_lock);
 	list_add_tail(&udc->list, &udc_list);
@@ -287,6 +309,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
 		goto err4;
 
 	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
+	udc->vbus = true;
 
 	mutex_unlock(&udc_lock);
 
@@ -348,21 +371,14 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
  */
 void usb_del_gadget_udc(struct usb_gadget *gadget)
 {
-	struct usb_udc		*udc = NULL;
+	struct usb_udc *udc = gadget->udc;
 
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list)
-		if (udc->gadget == gadget)
-			goto found;
-
-	dev_err(gadget->dev.parent, "gadget not registered.\n");
-	mutex_unlock(&udc_lock);
-
-	return;
+	if (!udc)
+		return;
 
-found:
 	dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
 
+	mutex_lock(&udc_lock);
 	list_del(&udc->list);
 	mutex_unlock(&udc_lock);
 
@@ -397,7 +413,7 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri
 		driver->unbind(udc->gadget);
 		goto err1;
 	}
-	usb_gadget_connect(udc->gadget);
+	usb_udc_connect_control(udc);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
 	return 0;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 5ad60e46dc2b..197a6a3e613b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -198,7 +198,7 @@ config USB_EHCI_HCD_AT91
 
 config USB_EHCI_MSM
 	tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
-	depends on ARCH_MSM || ARCH_QCOM
+	depends on ARCH_QCOM
 	select USB_EHCI_ROOT_HUB_TT
 	---help---
 	  Enables support for the USB Host controller present on the
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 85e56d1abd23..f4d88dfb26a7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -792,12 +792,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 					ehci->reset_done[i] == 0))
 				continue;
 
-			/* start 20 msec resume signaling from this port,
-			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
-			 * stop that signaling.  Use 5 ms extra for safety,
-			 * like usb_port_resume() does.
+			/* start USB_RESUME_TIMEOUT msec resume signaling from
+			 * this port, and make hub_wq collect
+			 * PORT_STAT_C_SUSPEND to stop that signaling.
 			 */
-			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+			ehci->reset_done[i] = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(i, &ehci->resuming_ports);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
 			usb_hcd_start_port_resume(&hcd->self, i);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 87cf86f38b36..69208447d213 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -471,10 +471,13 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 		ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
 	}
 
-	/* msleep for 20ms only if code is trying to resume port */
+	/*
+	 * msleep for USB_RESUME_TIMEOUT ms only if code is trying to resume
+	 * port
+	 */
 	if (resume_needed) {
 		spin_unlock_irq(&ehci->lock);
-		msleep(20);
+		msleep(USB_RESUME_TIMEOUT);
 		spin_lock_irq(&ehci->lock);
 		if (ehci->shutdown)
 			goto shutdown;
@@ -688,7 +691,7 @@ ehci_hub_descriptor (
 	int		ports = HCS_N_PORTS (ehci->hcs_params);
 	u16		temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = 10;	/* ehci 1.0, 2.3.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
@@ -942,7 +945,7 @@ int ehci_hub_control(
 			temp &= ~PORT_WAKE_BITS;
 			ehci_writel(ehci, temp | PORT_RESUME, status_reg);
 			ehci->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(wIndex, &ehci->resuming_ports);
 			usb_hcd_start_port_resume(&hcd->self, wIndex);
 			break;
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index f6eafecab15c..bfcbb9aa8816 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -29,7 +29,13 @@
 #define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
 
 #define USB_CMD			0x140
+#define   USB_CMD_RUN		BIT(0)
+#define   USB_CMD_RESET		BIT(1)
 #define USB_MODE		0x1a8
+#define   USB_MODE_MASK		GENMASK(1, 0)
+#define   USB_MODE_DEVICE	0x2
+#define   USB_MODE_HOST		0x3
+#define   USB_MODE_SDIS		BIT(4)
 #define USB_CAUSE		0x310
 #define USB_MASK		0x314
 #define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
@@ -69,8 +75,8 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 	/*
 	 * Reset controller
 	 */
-	wrl(USB_CMD, rdl(USB_CMD) | 0x2);
-	while (rdl(USB_CMD) & 0x2);
+	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
+	while (rdl(USB_CMD) & USB_CMD_RESET);
 
 	/*
 	 * GL# USB-10: Set IPG for non start of frame packets
@@ -112,16 +118,16 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 	/*
 	 * Stop and reset controller
 	 */
-	wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
-	wrl(USB_CMD, rdl(USB_CMD) | 0x2);
-	while (rdl(USB_CMD) & 0x2);
+	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
+	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
+	while (rdl(USB_CMD) & USB_CMD_RESET);
 
 	/*
 	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
 	 * TBD: This need to be done after each reset!
 	 * GL# USB-4 Setup USB Host mode
 	 */
-	wrl(USB_MODE, 0x13);
+	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
 }
 
 static void
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
index 70116a65262c..3bacdd7befe9 100644
--- a/drivers/usb/host/fhci-hub.c
+++ b/drivers/usb/host/fhci-hub.c
@@ -30,7 +30,7 @@
 /* virtual root hub specific descriptor */
 static u8 root_hub_des[] = {
 	0x09, /* blength */
-	0x29, /* bDescriptorType;hub-descriptor */
+	USB_DT_HUB, /* bDescriptorType;hub-descriptor */
 	0x01, /* bNbrPorts */
 	HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_NO_OCPM, /* wHubCharacteristics */
 	0x00, /* per-port power, no overcurrent */
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 475b21fd373b..000ed80ab592 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1509,7 +1509,7 @@ fotg210_hub_descriptor(
 	int		ports = HCS_N_PORTS(fotg210->hcs_params);
 	u16		temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = 10;	/* fotg210 1.0, 2.3.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
@@ -1595,7 +1595,7 @@ static int fotg210_hub_control(
 			/* resume signaling for 20 msec */
 			fotg210_writel(fotg210, temp | PORT_RESUME, status_reg);
 			fotg210->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			clear_bit(wIndex, &fotg210->port_c_suspend);
diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
index a83eefefffda..00e492eaba6a 100644
--- a/drivers/usb/host/fusbh200-hcd.c
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -1467,7 +1467,7 @@ fusbh200_hub_descriptor (
 	int		ports = HCS_N_PORTS (fusbh200->hcs_params);
 	u16		temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = 10;	/* fusbh200 1.0, 2.3.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
@@ -1550,10 +1550,9 @@ static int fusbh200_hub_control (
 			if ((temp & PORT_PE) == 0)
 				goto error;
 
-			/* resume signaling for 20 msec */
 			fusbh200_writel(fusbh200, temp | PORT_RESUME, status_reg);
 			fusbh200->reset_done[wIndex] = jiffies
-					+ msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
 			clear_bit(wIndex, &fusbh200->port_c_suspend);
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 6a2ad550b120..f542045dc2a6 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1474,7 +1474,7 @@ static int get_hub_descriptor(struct usb_hcd *hcd,
 			      struct usb_hub_descriptor *desc)
 {
 	struct imx21 *imx21 = hcd_to_imx21(hcd);
-	desc->bDescriptorType = 0x29;	/* HUB descriptor */
+	desc->bDescriptorType = USB_DT_HUB; /* HUB descriptor */
 	desc->bHubContrCurrent = 0;
 
 	desc->bNbrPorts = readl(imx21->regs + USBH_ROOTHUBA)
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 113d0cc6cc43..13181dcd9820 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -943,7 +943,7 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x,
 {
 	u32 reg = isp116x->rhdesca;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bDescLength = 9;
 	desc->bHubContrCurrent = 0;
 	desc->bNbrPorts = (u8) (reg & 0x3);
@@ -1490,7 +1490,7 @@ static int isp116x_bus_resume(struct usb_hcd *hcd)
 	spin_unlock_irq(&isp116x->lock);
 
 	hcd->state = HC_STATE_RESUMING;
-	msleep(20);
+	msleep(USB_RESUME_TIMEOUT);
 
 	/* Go operational */
 	spin_lock_irq(&isp116x->lock);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index b32ab60cad1e..6cf82ee460a6 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -1538,7 +1538,7 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd,
 
 	DBG(3, "%s: enter\n", __func__);
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bDescLength = 9;
 	desc->bHubContrCurrent = 0;
 	desc->bNbrPorts = reg & 0x3;
diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index a98833cbfcf3..fc1fd403973a 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -1659,7 +1659,7 @@ hub_descriptor(struct usb_hub_descriptor *desc)
 	/*
 	 * See Table 11-13: Hub Descriptor in USB 2.0 spec.
 	 */
-	desc->bDescriptorType = 0x29;	/* hub descriptor */
+	desc->bDescriptorType = USB_DT_HUB; /* hub descriptor */
 	desc->bDescLength = 9;
 	desc->wHubCharacteristics = cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM |
 						HUB_CHAR_COMMON_OCPM);
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 7cce85a1f7dc..15df00cceed9 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -39,7 +39,6 @@
 struct ohci_at91_priv {
 	struct clk *iclk;
 	struct clk *fclk;
-	struct clk *uclk;
 	struct clk *hclk;
 	bool clocked;
 	bool wakeup;		/* Saved wake-up state for resume */
@@ -64,10 +63,8 @@ static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
 {
 	if (ohci_at91->clocked)
 		return;
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(ohci_at91->uclk, 48000000);
-		clk_prepare_enable(ohci_at91->uclk);
-	}
+
+	clk_set_rate(ohci_at91->fclk, 48000000);
 	clk_prepare_enable(ohci_at91->hclk);
 	clk_prepare_enable(ohci_at91->iclk);
 	clk_prepare_enable(ohci_at91->fclk);
@@ -78,11 +75,10 @@ static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
 {
 	if (!ohci_at91->clocked)
 		return;
+
 	clk_disable_unprepare(ohci_at91->fclk);
 	clk_disable_unprepare(ohci_at91->iclk);
 	clk_disable_unprepare(ohci_at91->hclk);
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(ohci_at91->uclk);
 	ohci_at91->clocked = false;
 }
 
@@ -191,14 +187,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 		retval = PTR_ERR(ohci_at91->hclk);
 		goto err;
 	}
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		ohci_at91->uclk = devm_clk_get(dev, "usb_clk");
-		if (IS_ERR(ohci_at91->uclk)) {
-			dev_err(dev, "failed to get uclk\n");
-			retval = PTR_ERR(ohci_at91->uclk);
-			goto err;
-		}
-	}
 
 	board = hcd->self.controller->platform_data;
 	ohci = hcd_to_ohci(hcd);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index fe2aedd8a54d..ed678c17c4ea 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -536,7 +536,7 @@ ohci_hub_descriptor (
 	u32		rh = roothub_a (ohci);
 	u16		temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
 	desc->bHubContrCurrent = 0;
 
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index ef7efb278b15..6352f54e65a1 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -445,7 +445,7 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu,
 	int ports = HCS_N_PORTS(oxu->hcs_params);
 	u16 temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = 10;	/* oxu 1.0, 2.3.9 says 20ms max */
 	desc->bHubContrCurrent = 0;
 
@@ -2500,11 +2500,12 @@ static irqreturn_t oxu210_hcd_irq(struct usb_hcd *hcd)
 					|| oxu->reset_done[i] != 0)
 				continue;
 
-			/* start 20 msec resume signaling from this port,
-			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
+			/* start USB_RESUME_TIMEOUT resume signaling from this
+			 * port, and make hub_wq collect PORT_STAT_C_SUSPEND to
 			 * stop that signaling.
 			 */
-			oxu->reset_done[i] = jiffies + msecs_to_jiffies(20);
+			oxu->reset_done[i] = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			oxu_dbg(oxu, "port %d remote wakeup\n", i + 1);
 			mod_timer(&hcd->rh_timer, oxu->reset_done[i]);
 		}
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index bdc82fea0a1f..4cbd0633c5c2 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2136,7 +2136,7 @@ static int r8a66597_hub_status_data(struct usb_hcd *hcd, char *buf)
 static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597,
 				    struct usb_hub_descriptor *desc)
 {
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bHubContrCurrent = 0;
 	desc->bNbrPorts = r8a66597->max_root_hub;
 	desc->bDescLength = 9;
@@ -2301,7 +2301,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
 		rh->port &= ~USB_PORT_STAT_SUSPEND;
 		rh->port |= USB_PORT_STAT_C_SUSPEND << 16;
 		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
-		msleep(50);
+		msleep(USB_RESUME_TIMEOUT);
 		r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
 	}
 
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 4f4ba1ea9e9b..fd2a11473be7 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1091,7 +1091,7 @@ sl811h_hub_descriptor (
 ) {
 	u16		temp = 0;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bHubContrCurrent = 0;
 
 	desc->bNbrPorts = 1;
@@ -1259,7 +1259,7 @@ sl811h_hub_control(
 			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
 
 			mod_timer(&sl811->timer, jiffies
-					+ msecs_to_jiffies(20));
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT));
 			break;
 		case USB_PORT_FEAT_POWER:
 			port_power(sl811, 0);
@@ -1809,7 +1809,6 @@ struct platform_driver sl811h_driver = {
 	.resume =	sl811h_resume,
 	.driver = {
 		.name =	(char *) hcd_name,
-		.owner = THIS_MODULE,
 	},
 };
 EXPORT_SYMBOL(sl811h_driver);
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index ad97e8a1ad1c..d51687780b61 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2584,7 +2584,7 @@ static int u132_roothub_descriptor(struct u132 *u132,
 	retval = u132_read_pcimem(u132, roothub.a, &rh_a);
 	if (retval)
 		return retval;
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bPwrOn2PwrGood = (rh_a & RH_A_POTPGT) >> 24;
 	desc->bHubContrCurrent = 0;
 	desc->bNbrPorts = u132->num_ports;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 19ba5eafb31e..ece9e37e89fe 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -15,7 +15,7 @@
 static const __u8 root_hub_hub_des[] =
 {
 	0x09,			/*  __u8  bLength; */
-	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
+	USB_DT_HUB,		/*  __u8  bDescriptorType; Hub-descriptor */
 	0x02,			/*  __u8  bNbrPorts; */
 	HUB_CHAR_NO_LPSM |	/* __u16  wHubCharacteristics; */
 		HUB_CHAR_INDV_PORT_OCPM, /* (per-port OC, no power switching) */
@@ -166,7 +166,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
 				/* Port received a wakeup request */
 				set_bit(port, &uhci->resuming_ports);
 				uhci->ports_timeout = jiffies +
-						msecs_to_jiffies(25);
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
 				usb_hcd_start_port_resume(
 						&uhci_to_hcd(uhci)->self, port);
 
@@ -338,7 +338,8 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			uhci_finish_suspend(uhci, port, port_addr);
 
 			/* USB v2.0 7.1.7.5 */
-			uhci->ports_timeout = jiffies + msecs_to_jiffies(50);
+			uhci->ports_timeout = jiffies +
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			break;
 		case USB_PORT_FEAT_POWER:
 			/* UHCI has no power switching */
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index d7b363a418de..43626c44683b 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -313,8 +313,7 @@ error_wusbhc_create:
 	uwb_rc_put(wusbhc->uwb_rc);
 error:
 	whc_clean_up(whc);
-	if (usb_hcd)
-		usb_put_hcd(usb_hcd);
+	usb_put_hcd(usb_hcd);
 	return ret;
 }
 
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 0e11d61408ff..783e819139a7 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/usb/phy.h>
 #include <linux/slab.h>
 #include <linux/usb/xhci_pdriver.h>
 
@@ -155,12 +156,27 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
 		xhci->shared_hcd->can_do_streams = 1;
 
+	hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+	if (IS_ERR(hcd->usb_phy)) {
+		ret = PTR_ERR(hcd->usb_phy);
+		if (ret == -EPROBE_DEFER)
+			goto put_usb3_hcd;
+		hcd->usb_phy = NULL;
+	} else {
+		ret = usb_phy_init(hcd->usb_phy);
+		if (ret)
+			goto put_usb3_hcd;
+	}
+
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 	if (ret)
-		goto put_usb3_hcd;
+		goto disable_usb_phy;
 
 	return 0;
 
+disable_usb_phy:
+	usb_phy_shutdown(hcd->usb_phy);
+
 put_usb3_hcd:
 	usb_put_hcd(xhci->shared_hcd);
 
@@ -184,6 +200,7 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct clk *clk = xhci->clk;
 
 	usb_remove_hcd(xhci->shared_hcd);
+	usb_phy_shutdown(hcd->usb_phy);
 	usb_put_hcd(xhci->shared_hcd);
 
 	usb_remove_hcd(hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 73485fa4372f..f5397a517c54 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -238,7 +238,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
 
 			/* Toggle the cycle bit after the last ring segment. */
 			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
-				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+				ring->cycle_state ^= 1;
 			}
 		}
 		ring->enq_seg = ring->enq_seg->next;
@@ -1574,7 +1574,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
 		} else {
 			xhci_dbg(xhci, "resume HS port %d\n", port_id);
 			bus_state->resume_done[faked_port_index] = jiffies +
-				msecs_to_jiffies(20);
+				msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			set_bit(faked_port_index, &bus_state->resuming_ports);
 			mod_timer(&hcd->rh_timer,
 				  bus_state->resume_done[faked_port_index]);
@@ -2809,7 +2809,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 
 			/* Toggle the cycle bit after the last ring segment. */
 			if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
-				ring->cycle_state = (ring->cycle_state ? 0 : 1);
+				ring->cycle_state ^= 1;
 			}
 			ring->enq_seg = ring->enq_seg->next;
 			ring->enqueue = ring->enq_seg->trbs;
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index a62865af53cc..5cf2633cdb04 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -347,7 +347,8 @@ static int mdc800_usb_waitForIRQ (int mode, int msec)
 {
 	mdc800->camera_request_ready=1+mode;
 
-	wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken, msec*HZ/1000);
+	wait_event_timeout(mdc800->irq_wait, mdc800->irq_woken,
+			   msecs_to_jiffies(msec));
 	mdc800->irq_woken = 0;
 
 	if (mdc800->camera_request_ready>0)
@@ -743,8 +744,9 @@ static ssize_t mdc800_device_read (struct file *file, char __user *buf, size_t l
 					mutex_unlock(&mdc800->io_lock);
 					return len-left;
 				}
-				wait_event_timeout(mdc800->download_wait, mdc800->downloaded,
-										TO_DOWNLOAD_GET_READY*HZ/1000);
+				wait_event_timeout(mdc800->download_wait,
+				     mdc800->downloaded,
+				     msecs_to_jiffies(TO_DOWNLOAD_GET_READY));
 				mdc800->downloaded = 0;
 				if (mdc800->download_urb->status != 0)
 				{
@@ -867,7 +869,8 @@ static ssize_t mdc800_device_write (struct file *file, const char __user *buf, s
 				mutex_unlock(&mdc800->io_lock);
 				return -EIO;
 			}
-			wait_event_timeout(mdc800->write_wait, mdc800->written, TO_WRITE_GET_READY*HZ/1000);
+			wait_event_timeout(mdc800->write_wait, mdc800->written,
+					msecs_to_jiffies(TO_WRITE_GET_READY));
 			mdc800->written = 0;
 			if (mdc800->state == WORKING)
 			{
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index 3cb98b1d5d29..ac31d19cc54b 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -1758,7 +1758,7 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
 	int ports = HCS_N_PORTS(priv->hcs_params);
 	u16 temp;
 
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	/* priv 1.0, 2.3.9 says 20ms max */
 	desc->bPwrOn2PwrGood = 10;
 	desc->bHubContrCurrent = 0;
@@ -1869,7 +1869,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 				reg_write32(hcd->regs, HC_PORTSC1,
 							temp | PORT_RESUME);
 				priv->reset_done = jiffies +
-					msecs_to_jiffies(20);
+					msecs_to_jiffies(USB_RESUME_TIMEOUT);
 			}
 			break;
 		case USB_PORT_FEAT_C_SUSPEND:
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 76d77206e011..f7a7fc21be8a 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -255,3 +255,16 @@ config USB_LINK_LAYER_TEST
 	  This driver is for generating specific traffic for Super Speed Link
 	  Layer Test Device. Say Y only when you want to conduct USB Super Speed
 	  Link Layer Test for host controllers.
+
+config USB_CHAOSKEY
+	tristate "ChaosKey random number generator driver support"
+	depends on HW_RANDOM
+	help
+	  Say Y here if you want to connect an AltusMetrum ChaosKey to
+	  your computer's USB port. The ChaosKey is a hardware random
+	  number generator which hooks into the kernel entropy pool to
+	  ensure a large supply of entropy for /dev/random and
+	  /dev/urandom and also provides direct access via /dev/chaoskeyX
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chaoskey.
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 65b0402c1ca1..45fd4ac39d3e 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_USB_USS720)		+= uss720.o
 obj-$(CONFIG_USB_SEVSEG)		+= usbsevseg.o
 obj-$(CONFIG_USB_YUREX)			+= yurex.o
 obj-$(CONFIG_USB_HSIC_USB3503)		+= usb3503.o
+obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
 
 obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
 obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index b3d245ef46ef..a0a3827b4aff 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -329,7 +329,7 @@ error:
 					pdata->urbdata, pdata->urb->transfer_dma);
 			usb_free_urb(pdata->urb);
 		}
-		if (pdata->bd && !IS_ERR(pdata->bd))
+		if (!IS_ERR(pdata->bd))
 			backlight_device_unregister(pdata->bd);
 		kfree(pdata->msgdata);
 	}
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
new file mode 100644
index 000000000000..3ad5d19e4d04
--- /dev/null
+++ b/drivers/usb/misc/chaoskey.c
@@ -0,0 +1,532 @@
+/*
+ * chaoskey - driver for ChaosKey device from Altus Metrum.
+ *
+ * This device provides true random numbers using a noise source based
+ * on a reverse-biased p-n junction in avalanche breakdown. More
+ * details can be found at http://chaoskey.org
+ *
+ * The driver connects to the kernel hardware RNG interface to provide
+ * entropy for /dev/random and other kernel activities. It also offers
+ * a separate /dev/ entry to allow for direct access to the random
+ * bit stream.
+ *
+ * Copyright © 2015 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/wait.h>
+#include <linux/hw_random.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+
+static struct usb_driver chaoskey_driver;
+static struct usb_class_driver chaoskey_class;
+static int chaoskey_rng_read(struct hwrng *rng, void *data,
+			     size_t max, bool wait);
+
+#define usb_dbg(usb_if, format, arg...) \
+	dev_dbg(&(usb_if)->dev, format, ## arg)
+
+#define usb_err(usb_if, format, arg...) \
+	dev_err(&(usb_if)->dev, format, ## arg)
+
+/* Version Information */
+#define DRIVER_VERSION	"v0.1"
+#define DRIVER_AUTHOR	"Keith Packard, keithp@keithp.com"
+#define DRIVER_DESC	"Altus Metrum ChaosKey driver"
+#define DRIVER_SHORT	"chaoskey"
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define CHAOSKEY_VENDOR_ID	0x1d50	/* OpenMoko */
+#define CHAOSKEY_PRODUCT_ID	0x60c6	/* ChaosKey */
+
+#define CHAOSKEY_BUF_LEN	64	/* max size of USB full speed packet */
+
+#define NAK_TIMEOUT (HZ)		/* stall/wait timeout for device */
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define USB_CHAOSKEY_MINOR_BASE 0
+#else
+
+/* IOWARRIOR_MINOR_BASE + 16, not official yet */
+#define USB_CHAOSKEY_MINOR_BASE 224
+#endif
+
+static const struct usb_device_id chaoskey_table[] = {
+	{ USB_DEVICE(CHAOSKEY_VENDOR_ID, CHAOSKEY_PRODUCT_ID) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, chaoskey_table);
+
+/* Driver-local specific stuff */
+struct chaoskey {
+	struct usb_interface *interface;
+	char in_ep;
+	struct mutex lock;
+	struct mutex rng_lock;
+	int open;			/* open count */
+	int present;			/* device not disconnected */
+	int size;			/* size of buf */
+	int valid;			/* bytes of buf read */
+	int used;			/* bytes of buf consumed */
+	char *name;			/* product + serial */
+	struct hwrng hwrng;		/* Embedded struct for hwrng */
+	int hwrng_registered;		/* registered with hwrng API */
+	wait_queue_head_t wait_q;	/* for timeouts */
+	char *buf;
+};
+
+static void chaoskey_free(struct chaoskey *dev)
+{
+	usb_dbg(dev->interface, "free");
+	kfree(dev->name);
+	kfree(dev->buf);
+	kfree(dev);
+}
+
+static int chaoskey_probe(struct usb_interface *interface,
+			  const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *altsetting = interface->cur_altsetting;
+	int i;
+	int in_ep = -1;
+	struct chaoskey *dev;
+	int result;
+	int size;
+
+	usb_dbg(interface, "probe %s-%s", udev->product, udev->serial);
+
+	/* Find the first bulk IN endpoint and its packet size */
+	for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
+		if (usb_endpoint_is_bulk_in(&altsetting->endpoint[i].desc)) {
+			in_ep = usb_endpoint_num(&altsetting->endpoint[i].desc);
+			size = usb_endpoint_maxp(&altsetting->endpoint[i].desc);
+			break;
+		}
+	}
+
+	/* Validate endpoint and size */
+	if (in_ep == -1) {
+		usb_dbg(interface, "no IN endpoint found");
+		return -ENODEV;
+	}
+	if (size <= 0) {
+		usb_dbg(interface, "invalid size (%d)", size);
+		return -ENODEV;
+	}
+
+	if (size > CHAOSKEY_BUF_LEN) {
+		usb_dbg(interface, "size reduced from %d to %d\n",
+			size, CHAOSKEY_BUF_LEN);
+		size = CHAOSKEY_BUF_LEN;
+	}
+
+	/* Looks good, allocate and initialize */
+
+	dev = kzalloc(sizeof(struct chaoskey), GFP_KERNEL);
+
+	if (dev == NULL)
+		return -ENOMEM;
+
+	dev->buf = kmalloc(size, GFP_KERNEL);
+
+	if (dev->buf == NULL) {
+		kfree(dev);
+		return -ENOMEM;
+	}
+
+	/* Construct a name using the product and serial values. Each
+	 * device needs a unique name for the hwrng code
+	 */
+
+	if (udev->product && udev->serial) {
+		dev->name = kmalloc(strlen(udev->product) + 1 +
+				    strlen(udev->serial) + 1, GFP_KERNEL);
+		if (dev->name == NULL) {
+			kfree(dev->buf);
+			kfree(dev);
+			return -ENOMEM;
+		}
+
+		strcpy(dev->name, udev->product);
+		strcat(dev->name, "-");
+		strcat(dev->name, udev->serial);
+	}
+
+	dev->interface = interface;
+
+	dev->in_ep = in_ep;
+
+	dev->size = size;
+	dev->present = 1;
+
+	init_waitqueue_head(&dev->wait_q);
+
+	mutex_init(&dev->lock);
+	mutex_init(&dev->rng_lock);
+
+	usb_set_intfdata(interface, dev);
+
+	result = usb_register_dev(interface, &chaoskey_class);
+	if (result) {
+		usb_err(interface, "Unable to allocate minor number.");
+		usb_set_intfdata(interface, NULL);
+		chaoskey_free(dev);
+		return result;
+	}
+
+	dev->hwrng.name = dev->name ? dev->name : chaoskey_driver.name;
+	dev->hwrng.read = chaoskey_rng_read;
+
+	/* Set the 'quality' metric.  Quality is measured in units of
+	 * 1/1024's of a bit ("mills"). This should be set to 1024,
+	 * but there is a bug in the hwrng core which masks it with
+	 * 1023.
+	 *
+	 * The patch that has been merged to the crypto development
+	 * tree for that bug limits the value to 1024 at most, so by
+	 * setting this to 1024 + 1023, we get 1023 before the fix is
+	 * merged and 1024 afterwards. We'll patch this driver once
+	 * both bits of code are in the same tree.
+	 */
+	dev->hwrng.quality = 1024 + 1023;
+
+	dev->hwrng_registered = (hwrng_register(&dev->hwrng) == 0);
+	if (!dev->hwrng_registered)
+		usb_err(interface, "Unable to register with hwrng");
+
+	usb_enable_autosuspend(udev);
+
+	usb_dbg(interface, "chaoskey probe success, size %d", dev->size);
+	return 0;
+}
+
+static void chaoskey_disconnect(struct usb_interface *interface)
+{
+	struct chaoskey	*dev;
+
+	usb_dbg(interface, "disconnect");
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		usb_dbg(interface, "disconnect failed - no dev");
+		return;
+	}
+
+	if (dev->hwrng_registered)
+		hwrng_unregister(&dev->hwrng);
+
+	usb_deregister_dev(interface, &chaoskey_class);
+
+	usb_set_intfdata(interface, NULL);
+	mutex_lock(&dev->lock);
+
+	dev->present = 0;
+
+	if (!dev->open) {
+		mutex_unlock(&dev->lock);
+		chaoskey_free(dev);
+	} else
+		mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "disconnect done");
+}
+
+static int chaoskey_open(struct inode *inode, struct file *file)
+{
+	struct chaoskey *dev;
+	struct usb_interface *interface;
+
+	/* get the interface from minor number and driver information */
+	interface = usb_find_interface(&chaoskey_driver, iminor(inode));
+	if (!interface)
+		return -ENODEV;
+
+	usb_dbg(interface, "open");
+
+	dev = usb_get_intfdata(interface);
+	if (!dev) {
+		usb_dbg(interface, "open (dev)");
+		return -ENODEV;
+	}
+
+	file->private_data = dev;
+	mutex_lock(&dev->lock);
+	++dev->open;
+	mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "open success");
+	return 0;
+}
+
+static int chaoskey_release(struct inode *inode, struct file *file)
+{
+	struct chaoskey *dev = file->private_data;
+	struct usb_interface *interface;
+
+	if (dev == NULL)
+		return -ENODEV;
+
+	interface = dev->interface;
+
+	usb_dbg(interface, "release");
+
+	mutex_lock(&dev->lock);
+
+	usb_dbg(interface, "open count at release is %d", dev->open);
+
+	if (dev->open <= 0) {
+		usb_dbg(interface, "invalid open count (%d)", dev->open);
+		mutex_unlock(&dev->lock);
+		return -ENODEV;
+	}
+
+	--dev->open;
+
+	if (!dev->present) {
+		if (dev->open == 0) {
+			mutex_unlock(&dev->lock);
+			chaoskey_free(dev);
+		} else
+			mutex_unlock(&dev->lock);
+	} else
+		mutex_unlock(&dev->lock);
+
+	usb_dbg(interface, "release success");
+	return 0;
+}
+
+/* Fill the buffer. Called with dev->lock held
+ */
+static int _chaoskey_fill(struct chaoskey *dev)
+{
+	DEFINE_WAIT(wait);
+	int result;
+	int this_read;
+	struct usb_device *udev = interface_to_usbdev(dev->interface);
+
+	usb_dbg(dev->interface, "fill");
+
+	/* Return immediately if someone called before the buffer was
+	 * empty */
+	if (dev->valid != dev->used) {
+		usb_dbg(dev->interface, "not empty yet (valid %d used %d)",
+			dev->valid, dev->used);
+		return 0;
+	}
+
+	/* Bail if the device has been removed */
+	if (!dev->present) {
+		usb_dbg(dev->interface, "device not present");
+		return -ENODEV;
+	}
+
+	/* Make sure the device is awake */
+	result = usb_autopm_get_interface(dev->interface);
+	if (result) {
+		usb_dbg(dev->interface, "wakeup failed (result %d)", result);
+		return result;
+	}
+
+	result = usb_bulk_msg(udev,
+			      usb_rcvbulkpipe(udev, dev->in_ep),
+			      dev->buf, dev->size, &this_read,
+			      NAK_TIMEOUT);
+
+	/* Let the device go back to sleep eventually */
+	usb_autopm_put_interface(dev->interface);
+
+	if (result == 0) {
+		dev->valid = this_read;
+		dev->used = 0;
+	}
+
+	usb_dbg(dev->interface, "bulk_msg result %d this_read %d",
+		result, this_read);
+
+	return result;
+}
+
+static ssize_t chaoskey_read(struct file *file,
+			     char __user *buffer,
+			     size_t count,
+			     loff_t *ppos)
+{
+	struct chaoskey *dev;
+	ssize_t read_count = 0;
+	int this_time;
+	int result = 0;
+	unsigned long remain;
+
+	dev = file->private_data;
+
+	if (dev == NULL || !dev->present)
+		return -ENODEV;
+
+	usb_dbg(dev->interface, "read %zu", count);
+
+	while (count > 0) {
+
+		/* Grab the rng_lock briefly to ensure that the hwrng interface
+		 * gets priority over other user access
+		 */
+		result = mutex_lock_interruptible(&dev->rng_lock);
+		if (result)
+			goto bail;
+		mutex_unlock(&dev->rng_lock);
+
+		result = mutex_lock_interruptible(&dev->lock);
+		if (result)
+			goto bail;
+		if (dev->valid == dev->used) {
+			result = _chaoskey_fill(dev);
+			if (result) {
+				mutex_unlock(&dev->lock);
+				goto bail;
+			}
+
+			/* Read returned zero bytes */
+			if (dev->used == dev->valid) {
+				mutex_unlock(&dev->lock);
+				goto bail;
+			}
+		}
+
+		this_time = dev->valid - dev->used;
+		if (this_time > count)
+			this_time = count;
+
+		remain = copy_to_user(buffer, dev->buf + dev->used, this_time);
+		if (remain) {
+			result = -EFAULT;
+
+			/* Consume the bytes that were copied so we don't leak
+			 * data to user space
+			 */
+			dev->used += this_time - remain;
+			mutex_unlock(&dev->lock);
+			goto bail;
+		}
+
+		count -= this_time;
+		read_count += this_time;
+		buffer += this_time;
+		dev->used += this_time;
+		mutex_unlock(&dev->lock);
+	}
+bail:
+	if (read_count) {
+		usb_dbg(dev->interface, "read %zu bytes", read_count);
+		return read_count;
+	}
+	usb_dbg(dev->interface, "empty read, result %d", result);
+	return result;
+}
+
+static int chaoskey_rng_read(struct hwrng *rng, void *data,
+			     size_t max, bool wait)
+{
+	struct chaoskey *dev = container_of(rng, struct chaoskey, hwrng);
+	int this_time;
+
+	usb_dbg(dev->interface, "rng_read max %zu wait %d", max, wait);
+
+	if (!dev->present) {
+		usb_dbg(dev->interface, "device not present");
+		return 0;
+	}
+
+	/* Hold the rng_lock until we acquire the device lock so that
+	 * this operation gets priority over other user access to the
+	 * device
+	 */
+	mutex_lock(&dev->rng_lock);
+
+	mutex_lock(&dev->lock);
+
+	mutex_unlock(&dev->rng_lock);
+
+	/* Try to fill the buffer if empty. It doesn't actually matter
+	 * if _chaoskey_fill works; we'll just return zero bytes as
+	 * the buffer will still be empty
+	 */
+	if (dev->valid == dev->used)
+		(void) _chaoskey_fill(dev);
+
+	this_time = dev->valid - dev->used;
+	if (this_time > max)
+		this_time = max;
+
+	memcpy(data, dev->buf, this_time);
+
+	dev->used += this_time;
+
+	mutex_unlock(&dev->lock);
+
+	usb_dbg(dev->interface, "rng_read this_time %d\n", this_time);
+	return this_time;
+}
+
+#ifdef CONFIG_PM
+static int chaoskey_suspend(struct usb_interface *interface,
+			    pm_message_t message)
+{
+	usb_dbg(interface, "suspend");
+	return 0;
+}
+
+static int chaoskey_resume(struct usb_interface *interface)
+{
+	usb_dbg(interface, "resume");
+	return 0;
+}
+#else
+#define chaoskey_suspend NULL
+#define chaoskey_resume NULL
+#endif
+
+/* file operation pointers */
+static const struct file_operations chaoskey_fops = {
+	.owner = THIS_MODULE,
+	.read = chaoskey_read,
+	.open = chaoskey_open,
+	.release = chaoskey_release,
+	.llseek = default_llseek,
+};
+
+/* class driver information */
+static struct usb_class_driver chaoskey_class = {
+	.name = "chaoskey%d",
+	.fops = &chaoskey_fops,
+	.minor_base = USB_CHAOSKEY_MINOR_BASE,
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver chaoskey_driver = {
+	.name = DRIVER_SHORT,
+	.probe = chaoskey_probe,
+	.disconnect = chaoskey_disconnect,
+	.suspend = chaoskey_suspend,
+	.resume = chaoskey_resume,
+	.reset_resume = chaoskey_resume,
+	.id_table = chaoskey_table,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(chaoskey_driver);
+
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 97cd9e24bd25..7771be3ac178 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -574,7 +574,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
 	}
 
 	if (read_timeout) {
-		timeout = jiffies + read_timeout * HZ / 1000;
+		timeout = jiffies + msecs_to_jiffies(read_timeout);
 	}
 
 	/* wait for data */
@@ -592,7 +592,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count,
 		/* reset read timeout during read or write activity */
 		if (read_timeout
 		    && (dev->read_buffer_length || dev->interrupt_out_busy)) {
-			timeout = jiffies + read_timeout * HZ / 1000;
+			timeout = jiffies + msecs_to_jiffies(read_timeout);
 		}
 		/* check for read timeout */
 		if (read_timeout && time_after (jiffies, timeout)) {
@@ -831,7 +831,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 	dev->read_buffer_length = 0;
 	dev->read_packet_length = 0;
 	spin_lock_init (&dev->read_buffer_lock);
-	dev->packet_timeout_jiffies = packet_timeout * HZ / 1000;
+	dev->packet_timeout_jiffies = msecs_to_jiffies(packet_timeout);
 	dev->read_last_arrival = jiffies;
 
 	init_waitqueue_head (&dev->read_wait);
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 258d2f546e43..64ff5b91752d 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -186,8 +186,31 @@ static int usb3503_probe(struct usb3503 *hub)
 		hub->mode		= pdata->initial_mode;
 	} else if (np) {
 		struct clk *clk;
+		u32 rate = 0;
 		hub->port_off_mask = 0;
 
+		if (!of_property_read_u32(np, "refclk-frequency", &rate)) {
+			switch (rate) {
+			case 38400000:
+			case 26000000:
+			case 19200000:
+			case 12000000:
+				hub->secondary_ref_clk = 0;
+				break;
+			case 24000000:
+			case 27000000:
+			case 25000000:
+			case 50000000:
+				hub->secondary_ref_clk = 1;
+				break;
+			default:
+				dev_err(dev,
+					"unsupported reference clock rate (%d)\n",
+					(int) rate);
+				return -EINVAL;
+			}
+		}
+
 		clk = devm_clk_get(dev, "refclk");
 		if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) {
 			dev_err(dev, "unable to request refclk (%ld)\n",
@@ -196,31 +219,9 @@ static int usb3503_probe(struct usb3503 *hub)
 		}
 
 		if (!IS_ERR(clk)) {
-			u32 rate = 0;
 			hub->clk = clk;
 
-			if (!of_property_read_u32(np, "refclk-frequency",
-						 &rate)) {
-
-				switch (rate) {
-				case 38400000:
-				case 26000000:
-				case 19200000:
-				case 12000000:
-					hub->secondary_ref_clk = 0;
-					break;
-				case 24000000:
-				case 27000000:
-				case 25000000:
-				case 50000000:
-					hub->secondary_ref_clk = 1;
-					break;
-				default:
-					dev_err(dev,
-						"unsupported reference clock rate (%d)\n",
-						(int) rate);
-					return -EINVAL;
-				}
+			if (rate != 0) {
 				err = clk_set_rate(hub->clk, rate);
 				if (err) {
 					dev_err(dev,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 067920f2d570..3789b08ef67b 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -99,6 +99,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/usb.h>
 
 #include "musb_core.h"
 
@@ -507,7 +508,8 @@ void musb_hnp_stop(struct musb *musb)
 	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 }
 
-static void musb_generic_disable(struct musb *musb);
+static void musb_recover_from_babble(struct musb *musb);
+
 /*
  * Interrupt Service Routine to record USB "global" interrupts.
  * Since these do not happen often and signify things of
@@ -534,35 +536,21 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 	 */
 	if (int_usb & MUSB_INTR_RESUME) {
 		handled = IRQ_HANDLED;
-		dev_dbg(musb->controller, "RESUME (%s)\n", usb_otg_state_string(musb->xceiv->otg->state));
+		dev_dbg(musb->controller, "RESUME (%s)\n",
+				usb_otg_state_string(musb->xceiv->otg->state));
 
 		if (devctl & MUSB_DEVCTL_HM) {
-			void __iomem *mbase = musb->mregs;
-			u8 power;
-
 			switch (musb->xceiv->otg->state) {
 			case OTG_STATE_A_SUSPEND:
 				/* remote wakeup?  later, GetPortStatus
 				 * will stop RESUME signaling
 				 */
 
-				power = musb_readb(musb->mregs, MUSB_POWER);
-				if (power & MUSB_POWER_SUSPENDM) {
-					/* spurious */
-					musb->int_usb &= ~MUSB_INTR_SUSPEND;
-					dev_dbg(musb->controller, "Spurious SUSPENDM\n");
-					break;
-				}
-
-				power &= ~MUSB_POWER_SUSPENDM;
-				musb_writeb(mbase, MUSB_POWER,
-						power | MUSB_POWER_RESUME);
-
 				musb->port1_status |=
 						(USB_PORT_STAT_C_SUSPEND << 16)
 						| MUSB_PORT_STAT_RESUME;
 				musb->rh_timer = jiffies
-						 + msecs_to_jiffies(20);
+					+ msecs_to_jiffies(USB_RESUME_TIMEOUT);
 				musb->need_finish_resume = 1;
 
 				musb->xceiv->otg->state = OTG_STATE_A_HOST;
@@ -775,10 +763,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		musb->ep0_stage = MUSB_EP0_START;
 
-		/* flush endpoints when transitioning from Device Mode */
-		if (is_peripheral_active(musb)) {
-			/* REVISIT HNP; just force disconnect */
-		}
 		musb->intrtxe = musb->epmask;
 		musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe);
 		musb->intrrxe = musb->epmask & 0xfffe;
@@ -879,20 +863,19 @@ b_host:
 	 */
 	if (int_usb & MUSB_INTR_RESET) {
 		handled = IRQ_HANDLED;
-		if ((devctl & MUSB_DEVCTL_HM) != 0) {
+		if (devctl & MUSB_DEVCTL_HM) {
 			/*
-			 * Looks like non-HS BABBLE can be ignored, but
-			 * HS BABBLE is an error condition. For HS the solution
-			 * is to avoid babble in the first place and fix what
-			 * caused BABBLE. When HS BABBLE happens we can only
-			 * stop the session.
+			 * When BABBLE happens what we can depends on which
+			 * platform MUSB is running, because some platforms
+			 * implemented proprietary means for 'recovering' from
+			 * Babble conditions. One such platform is AM335x. In
+			 * most cases, however, the only thing we can do is
+			 * drop the session.
 			 */
-			if (devctl & (MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV))
-				dev_dbg(musb->controller, "BABBLE devctl: %02x\n", devctl);
-			else {
-				ERR("Stopping host session -- babble\n");
-				musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
-			}
+			dev_err(musb->controller, "Babble\n");
+
+			if (is_host_active(musb))
+				musb_recover_from_babble(musb);
 		} else {
 			dev_dbg(musb->controller, "BUS RESET as %s\n",
 				usb_otg_state_string(musb->xceiv->otg->state));
@@ -931,13 +914,6 @@ b_host:
 		}
 	}
 
-	/* handle babble condition */
-	if (int_usb & MUSB_INTR_BABBLE && is_host_active(musb)) {
-		musb_generic_disable(musb);
-		schedule_delayed_work(&musb->recover_work,
-				      msecs_to_jiffies(100));
-	}
-
 #if 0
 /* REVISIT ... this would be for multiplexing periodic endpoints, or
  * supporting transfer phasing to prevent exceeding ISO bandwidth
@@ -990,7 +966,7 @@ b_host:
 
 /*-------------------------------------------------------------------------*/
 
-static void musb_generic_disable(struct musb *musb)
+static void musb_disable_interrupts(struct musb *musb)
 {
 	void __iomem	*mbase = musb->mregs;
 	u16	temp;
@@ -1002,14 +978,33 @@ static void musb_generic_disable(struct musb *musb)
 	musb->intrrxe = 0;
 	musb_writew(mbase, MUSB_INTRRXE, 0);
 
-	/* off */
-	musb_writeb(mbase, MUSB_DEVCTL, 0);
-
 	/*  flush pending interrupts */
 	temp = musb_readb(mbase, MUSB_INTRUSB);
 	temp = musb_readw(mbase, MUSB_INTRTX);
 	temp = musb_readw(mbase, MUSB_INTRRX);
+}
+
+static void musb_enable_interrupts(struct musb *musb)
+{
+	void __iomem    *regs = musb->mregs;
+
+	/*  Set INT enable registers, enable interrupts */
+	musb->intrtxe = musb->epmask;
+	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+	musb->intrrxe = musb->epmask & 0xfffe;
+	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+}
+
+static void musb_generic_disable(struct musb *musb)
+{
+	void __iomem	*mbase = musb->mregs;
 
+	musb_disable_interrupts(musb);
+
+	/* off */
+	musb_writeb(mbase, MUSB_DEVCTL, 0);
 }
 
 /*
@@ -1022,13 +1017,7 @@ void musb_start(struct musb *musb)
 
 	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
 
-	/*  Set INT enable registers, enable interrupts */
-	musb->intrtxe = musb->epmask;
-	musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
-	musb->intrrxe = musb->epmask & 0xfffe;
-	musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
-	musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
+	musb_enable_interrupts(musb);
 	musb_writeb(regs, MUSB_TESTMODE, 0);
 
 	/* put into basic highspeed mode and start session */
@@ -1587,9 +1576,12 @@ static int musb_core_init(u16 musb_type, struct musb *musb)
 irqreturn_t musb_interrupt(struct musb *musb)
 {
 	irqreturn_t	retval = IRQ_NONE;
+	unsigned long	status;
+	unsigned long	epnum;
 	u8		devctl;
-	int		ep_num;
-	u32		reg;
+
+	if (!musb->int_usb && !musb->int_tx && !musb->int_rx)
+		return IRQ_NONE;
 
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
@@ -1597,56 +1589,57 @@ irqreturn_t musb_interrupt(struct musb *musb)
 		is_host_active(musb) ? "host" : "peripheral",
 		musb->int_usb, musb->int_tx, musb->int_rx);
 
-	/* the core can interrupt us for multiple reasons; docs have
-	 * a generic interrupt flowchart to follow
+	/**
+	 * According to Mentor Graphics' documentation, flowchart on page 98,
+	 * IRQ should be handled as follows:
+	 *
+	 * . Resume IRQ
+	 * . Session Request IRQ
+	 * . VBUS Error IRQ
+	 * . Suspend IRQ
+	 * . Connect IRQ
+	 * . Disconnect IRQ
+	 * . Reset/Babble IRQ
+	 * . SOF IRQ (we're not using this one)
+	 * . Endpoint 0 IRQ
+	 * . TX Endpoints
+	 * . RX Endpoints
+	 *
+	 * We will be following that flowchart in order to avoid any problems
+	 * that might arise with internal Finite State Machine.
 	 */
-	if (musb->int_usb)
-		retval |= musb_stage0_irq(musb, musb->int_usb,
-				devctl);
 
-	/* "stage 1" is handling endpoint irqs */
+	if (musb->int_usb)
+		retval |= musb_stage0_irq(musb, musb->int_usb, devctl);
 
-	/* handle endpoint 0 first */
 	if (musb->int_tx & 1) {
 		if (is_host_active(musb))
 			retval |= musb_h_ep0_irq(musb);
 		else
 			retval |= musb_g_ep0_irq(musb);
+
+		/* we have just handled endpoint 0 IRQ, clear it */
+		musb->int_tx &= ~BIT(0);
 	}
 
-	/* RX on endpoints 1-15 */
-	reg = musb->int_rx >> 1;
-	ep_num = 1;
-	while (reg) {
-		if (reg & 1) {
-			/* musb_ep_select(musb->mregs, ep_num); */
-			/* REVISIT just retval = ep->rx_irq(...) */
-			retval = IRQ_HANDLED;
-			if (is_host_active(musb))
-				musb_host_rx(musb, ep_num);
-			else
-				musb_g_rx(musb, ep_num);
-		}
+	status = musb->int_tx;
 
-		reg >>= 1;
-		ep_num++;
+	for_each_set_bit(epnum, &status, 16) {
+		retval = IRQ_HANDLED;
+		if (is_host_active(musb))
+			musb_host_tx(musb, epnum);
+		else
+			musb_g_tx(musb, epnum);
 	}
 
-	/* TX on endpoints 1-15 */
-	reg = musb->int_tx >> 1;
-	ep_num = 1;
-	while (reg) {
-		if (reg & 1) {
-			/* musb_ep_select(musb->mregs, ep_num); */
-			/* REVISIT just retval |= ep->tx_irq(...) */
-			retval = IRQ_HANDLED;
-			if (is_host_active(musb))
-				musb_host_tx(musb, ep_num);
-			else
-				musb_g_tx(musb, ep_num);
-		}
-		reg >>= 1;
-		ep_num++;
+	status = musb->int_rx;
+
+	for_each_set_bit(epnum, &status, 16) {
+		retval = IRQ_HANDLED;
+		if (is_host_active(musb))
+			musb_host_rx(musb, epnum);
+		else
+			musb_g_rx(musb, epnum);
 	}
 
 	return retval;
@@ -1825,33 +1818,44 @@ static void musb_irq_work(struct work_struct *data)
 	}
 }
 
-/* Recover from babble interrupt conditions */
-static void musb_recover_work(struct work_struct *data)
+static void musb_recover_from_babble(struct musb *musb)
 {
-	struct musb *musb = container_of(data, struct musb, recover_work.work);
-	int status, ret;
+	int ret;
+	u8 devctl;
 
-	ret  = musb_platform_reset(musb);
-	if (ret)
+	musb_disable_interrupts(musb);
+
+	/*
+	 * wait at least 320 cycles of 60MHz clock. That's 5.3us, we will give
+	 * it some slack and wait for 10us.
+	 */
+	udelay(10);
+
+	ret  = musb_platform_recover(musb);
+	if (ret) {
+		musb_enable_interrupts(musb);
 		return;
+	}
 
-	usb_phy_vbus_off(musb->xceiv);
-	usleep_range(100, 200);
+	/* drop session bit */
+	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+	devctl &= ~MUSB_DEVCTL_SESSION;
+	musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
-	usb_phy_vbus_on(musb->xceiv);
-	usleep_range(100, 200);
+	/* tell usbcore about it */
+	musb_root_disconnect(musb);
 
 	/*
 	 * When a babble condition occurs, the musb controller
 	 * removes the session bit and the endpoint config is lost.
 	 */
 	if (musb->dyn_fifo)
-		status = ep_config_from_table(musb);
+		ret = ep_config_from_table(musb);
 	else
-		status = ep_config_from_hw(musb);
+		ret = ep_config_from_hw(musb);
 
-	/* start the session again */
-	if (status == 0)
+	/* restart session */
+	if (ret == 0)
 		musb_start(musb);
 }
 
@@ -2087,7 +2091,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	/* Init IRQ workqueue before request_irq */
 	INIT_WORK(&musb->irq_work, musb_irq_work);
-	INIT_DELAYED_WORK(&musb->recover_work, musb_recover_work);
 	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
 	INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
 
@@ -2183,7 +2186,6 @@ fail4:
 
 fail3:
 	cancel_work_sync(&musb->irq_work);
-	cancel_delayed_work_sync(&musb->recover_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	if (musb->dma_controller)
@@ -2249,7 +2251,6 @@ static int musb_remove(struct platform_device *pdev)
 		dma_controller_destroy(musb->dma_controller);
 
 	cancel_work_sync(&musb->irq_work);
-	cancel_delayed_work_sync(&musb->recover_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	musb_free(musb);
@@ -2463,7 +2464,7 @@ static int musb_resume(struct device *dev)
 	if (musb->need_finish_resume) {
 		musb->need_finish_resume = 0;
 		schedule_delayed_work(&musb->finish_resume_work,
-				      msecs_to_jiffies(20));
+				      msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 
 	/*
@@ -2506,7 +2507,7 @@ static int musb_runtime_resume(struct device *dev)
 	if (musb->need_finish_resume) {
 		musb->need_finish_resume = 0;
 		schedule_delayed_work(&musb->finish_resume_work,
-				msecs_to_jiffies(20));
+				msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 
 	return 0;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 5e65958f7915..3877249a8b2d 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -160,7 +160,8 @@ struct musb_io;
  * @init:	turns on clocks, sets up platform-specific registers, etc
  * @exit:	undoes @init
  * @set_mode:	forcefully changes operating mode
- * @try_ilde:	tries to idle the IP
+ * @try_idle:	tries to idle the IP
+ * @recover:	platform-specific babble recovery
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
  * @adjust_channel_params: pre check for standard dma channel_program func
@@ -196,7 +197,7 @@ struct musb_platform_ops {
 	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
 	int	(*set_mode)(struct musb *musb, u8 mode);
 	void	(*try_idle)(struct musb *musb, unsigned long timeout);
-	int	(*reset)(struct musb *musb);
+	int	(*recover)(struct musb *musb);
 
 	int	(*vbus_status)(struct musb *musb);
 	void	(*set_vbus)(struct musb *musb, int on);
@@ -300,7 +301,6 @@ struct musb {
 
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
-	struct delayed_work	recover_work;
 	struct delayed_work	deassert_reset_work;
 	struct delayed_work	finish_resume_work;
 	u16			hwvers;
@@ -558,12 +558,12 @@ static inline void musb_platform_try_idle(struct musb *musb,
 		musb->ops->try_idle(musb, timeout);
 }
 
-static inline int  musb_platform_reset(struct musb *musb)
+static inline int  musb_platform_recover(struct musb *musb)
 {
-	if (!musb->ops->reset)
-		return -EINVAL;
+	if (!musb->ops->recover)
+		return 0;
 
-	return musb->ops->reset(musb);
+	return musb->ops->recover(musb);
 }
 
 static inline int musb_platform_get_vbus_status(struct musb *musb)
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index be84562d021b..8bd8c5e26921 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -225,10 +225,12 @@ static void cppi41_dma_callback(void *private_data)
 	struct dma_channel *channel = private_data;
 	struct cppi41_dma_channel *cppi41_channel = channel->private_data;
 	struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep;
+	struct cppi41_dma_controller *controller;
 	struct musb *musb = hw_ep->musb;
 	unsigned long flags;
 	struct dma_tx_state txstate;
 	u32 transferred;
+	int is_hs = 0;
 	bool empty;
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -248,61 +250,59 @@ static void cppi41_dma_callback(void *private_data)
 			transferred < cppi41_channel->packet_sz)
 		cppi41_channel->prog_len = 0;
 
-	empty = musb_is_tx_fifo_empty(hw_ep);
-	if (empty) {
+	if (cppi41_channel->is_tx)
+		empty = musb_is_tx_fifo_empty(hw_ep);
+
+	if (!cppi41_channel->is_tx || empty) {
 		cppi41_trans_done(cppi41_channel);
-	} else {
-		struct cppi41_dma_controller *controller;
-		int is_hs = 0;
-		/*
-		 * On AM335x it has been observed that the TX interrupt fires
-		 * too early that means the TXFIFO is not yet empty but the DMA
-		 * engine says that it is done with the transfer. We don't
-		 * receive a FIFO empty interrupt so the only thing we can do is
-		 * to poll for the bit. On HS it usually takes 2us, on FS around
-		 * 110us - 150us depending on the transfer size.
-		 * We spin on HS (no longer than than 25us and setup a timer on
-		 * FS to check for the bit and complete the transfer.
-		 */
-		controller = cppi41_channel->controller;
+		goto out;
+	}
 
-		if (is_host_active(musb)) {
-			if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
-				is_hs = 1;
-		} else {
-			if (musb->g.speed == USB_SPEED_HIGH)
-				is_hs = 1;
-		}
-		if (is_hs) {
-			unsigned wait = 25;
-
-			do {
-				empty = musb_is_tx_fifo_empty(hw_ep);
-				if (empty)
-					break;
-				wait--;
-				if (!wait)
-					break;
-				udelay(1);
-			} while (1);
+	/*
+	 * On AM335x it has been observed that the TX interrupt fires
+	 * too early that means the TXFIFO is not yet empty but the DMA
+	 * engine says that it is done with the transfer. We don't
+	 * receive a FIFO empty interrupt so the only thing we can do is
+	 * to poll for the bit. On HS it usually takes 2us, on FS around
+	 * 110us - 150us depending on the transfer size.
+	 * We spin on HS (no longer than than 25us and setup a timer on
+	 * FS to check for the bit and complete the transfer.
+	 */
+	controller = cppi41_channel->controller;
+
+	if (is_host_active(musb)) {
+		if (musb->port1_status & USB_PORT_STAT_HIGH_SPEED)
+			is_hs = 1;
+	} else {
+		if (musb->g.speed == USB_SPEED_HIGH)
+			is_hs = 1;
+	}
+	if (is_hs) {
+		unsigned wait = 25;
 
+		do {
 			empty = musb_is_tx_fifo_empty(hw_ep);
 			if (empty) {
 				cppi41_trans_done(cppi41_channel);
 				goto out;
 			}
-		}
-		list_add_tail(&cppi41_channel->tx_check,
-				&controller->early_tx_list);
-		if (!hrtimer_is_queued(&controller->early_tx)) {
-			unsigned long usecs = cppi41_channel->total_len / 10;
+			wait--;
+			if (!wait)
+				break;
+			cpu_relax();
+		} while (1);
+	}
+	list_add_tail(&cppi41_channel->tx_check,
+			&controller->early_tx_list);
+	if (!hrtimer_is_queued(&controller->early_tx)) {
+		unsigned long usecs = cppi41_channel->total_len / 10;
 
-			hrtimer_start_range_ns(&controller->early_tx,
+		hrtimer_start_range_ns(&controller->early_tx,
 				ktime_set(0, usecs * NSEC_PER_USEC),
 				20 * NSEC_PER_USEC,
 				HRTIMER_MODE_REL);
-		}
 	}
+
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index a900c9877195..65d931a28a14 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -119,7 +119,7 @@ struct dsps_musb_wrapper {
 	unsigned	iddig:5;
 	unsigned	iddig_mux:5;
 	/* miscellaneous stuff */
-	u8		poll_seconds;
+	unsigned	poll_timeout;
 };
 
 /*
@@ -225,9 +225,8 @@ static void dsps_musb_enable(struct musb *musb)
 
 	dsps_writel(reg_base, wrp->epintr_set, epmask);
 	dsps_writel(reg_base, wrp->coreintr_set, coremask);
-	/* Force the DRVVBUS IRQ so we can start polling for ID change. */
-	dsps_writel(reg_base, wrp->coreintr_set,
-		    (1 << wrp->drvvbus) << wrp->usb_shift);
+	/* start polling for ID change. */
+	mod_timer(&glue->timer, jiffies + msecs_to_jiffies(wrp->poll_timeout));
 	dsps_musb_try_idle(musb, 0);
 }
 
@@ -285,7 +284,8 @@ static void otg_timer(unsigned long _musb)
 		}
 		if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
 			dsps_writeb(mregs, MUSB_DEVCTL, MUSB_DEVCTL_SESSION);
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 		break;
 	case OTG_STATE_A_WAIT_VFALL:
 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
@@ -330,28 +330,6 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 
 	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
 			usbintr, epintr);
-	/*
-	 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for
-	 * DSPS IP's missing ID change IRQ.  We need an ID change IRQ to
-	 * switch appropriately between halves of the OTG state machine.
-	 * Managing DEVCTL.SESSION per Mentor docs requires that we know its
-	 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set.
-	 * Also, DRVVBUS pulses for SRP (but not at 5V) ...
-	 */
-	if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) {
-		pr_info("CAUTION: musb: Babble Interrupt Occurred\n");
-
-		/*
-		 * When a babble condition occurs, the musb controller removes
-		 * the session and is no longer in host mode. Hence, all
-		 * devices connected to its root hub get disconnected.
-		 *
-		 * Hand this error down to the musb core isr, so it can
-		 * recover.
-		 */
-		musb->int_usb = MUSB_INTR_BABBLE | MUSB_INTR_DISCONNECT;
-		musb->int_tx = musb->int_rx = 0;
-	}
 
 	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
 		int drvvbus = dsps_readl(reg_base, wrp->status);
@@ -374,8 +352,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 			 */
 			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
-			mod_timer(&glue->timer,
-					jiffies + wrp->poll_seconds * HZ);
+			mod_timer(&glue->timer, jiffies +
+					msecs_to_jiffies(wrp->poll_timeout));
 			WARNING("VBUS error workaround (delay coming)\n");
 		} else if (drvvbus) {
 			MUSB_HST_MODE(musb);
@@ -404,7 +382,8 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	/* Poll for ID change in OTG port mode */
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
 
@@ -453,7 +432,7 @@ static int dsps_musb_init(struct musb *musb)
 	musb->ctrl_base = reg_base;
 
 	/* NOP driver needs change if supporting dual instance */
-	musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
+	musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0);
 	if (IS_ERR(musb->xceiv))
 		return PTR_ERR(musb->xceiv);
 
@@ -497,7 +476,7 @@ static int dsps_musb_init(struct musb *musb)
 	 * logic enabled.
 	 */
 	val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
-	if (val == MUSB_BABBLE_RCV_DISABLE) {
+	if (val & MUSB_BABBLE_RCV_DISABLE) {
 		glue->sw_babble_enabled = true;
 		val |= MUSB_BABBLE_SW_SESSION_CTRL;
 		dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
@@ -571,7 +550,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
 	return 0;
 }
 
-static bool  sw_babble_control(struct musb *musb)
+static bool dsps_sw_babble_control(struct musb *musb)
 {
 	u8 babble_ctl;
 	bool session_restart =  false;
@@ -622,37 +601,36 @@ static bool  sw_babble_control(struct musb *musb)
 	return session_restart;
 }
 
-static int dsps_musb_reset(struct musb *musb)
+static int dsps_musb_recover(struct musb *musb)
 {
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
-	const struct dsps_musb_wrapper *wrp = glue->wrp;
-	int session_restart = 0, error;
+	int session_restart = 0;
 
 	if (glue->sw_babble_enabled)
-		session_restart = sw_babble_control(musb);
-	/*
-	 * In case of new silicon version babble condition can be recovered
-	 * without resetting the MUSB. But for older silicon versions, MUSB
-	 * reset is needed
-	 */
-	if (session_restart || !glue->sw_babble_enabled) {
-		dev_info(musb->controller, "Restarting MUSB to recover from Babble\n");
-		dsps_writel(musb->ctrl_base, wrp->control, (1 << wrp->reset));
-		usleep_range(100, 200);
-		usb_phy_shutdown(musb->xceiv);
-		error = phy_power_off(musb->phy);
-		if (error)
-			dev_err(dev, "phy shutdown failed: %i\n", error);
-		usleep_range(100, 200);
-		usb_phy_init(musb->xceiv);
-		error = phy_power_on(musb->phy);
-		if (error)
-			dev_err(dev, "phy powerup failed: %i\n", error);
+		session_restart = dsps_sw_babble_control(musb);
+	else
 		session_restart = 1;
+
+	return session_restart ? 0 : -EPIPE;
+}
+
+/* Similar to am35x, dm81xx support only 32-bit read operation */
+static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	if (len >= 4) {
+		ioread32_rep(fifo, dst, len >> 2);
+		dst += len & ~0x03;
+		len &= 0x03;
 	}
 
-	return !session_restart;
+	/* Read any remaining 1 to 3 bytes */
+	if (len > 0) {
+		u32 val = musb_readl(fifo, 0);
+		memcpy(dst, &val, len);
+	}
 }
 
 static struct musb_platform_ops dsps_ops = {
@@ -665,7 +643,7 @@ static struct musb_platform_ops dsps_ops = {
 
 	.try_idle	= dsps_musb_try_idle,
 	.set_mode	= dsps_musb_set_mode,
-	.reset		= dsps_musb_reset,
+	.recover	= dsps_musb_recover,
 };
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
@@ -737,7 +715,6 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 	musb->dev.parent		= dev;
 	musb->dev.dma_mask		= &musb_dmamask;
 	musb->dev.coherent_dma_mask	= musb_dmamask;
-	musb->dev.of_node		= of_node_get(dn);
 
 	glue->musb = musb;
 
@@ -802,6 +779,9 @@ static int dsps_probe(struct platform_device *pdev)
 	}
 	wrp = match->data;
 
+	if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816"))
+		dsps_ops.read_fifo = dsps_read_fifo32;
+
 	/* allocate glue */
 	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 	if (!glue)
@@ -873,12 +853,14 @@ static const struct dsps_musb_wrapper am33xx_driver_data = {
 	.rxep_shift		= 16,
 	.rxep_mask		= 0xfffe,
 	.rxep_bitmap		= (0xfffe << 16),
-	.poll_seconds		= 2,
+	.poll_timeout		= 2000, /* ms */
 };
 
 static const struct of_device_id musb_dsps_of_match[] = {
 	{ .compatible = "ti,musb-am33xx",
-		.data = (void *) &am33xx_driver_data, },
+		.data = &am33xx_driver_data, },
+	{ .compatible = "ti,musb-dm816",
+		.data = &am33xx_driver_data, },
 	{  },
 };
 MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
@@ -929,7 +911,8 @@ static int dsps_resume(struct device *dev)
 	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
 	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
 	    musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
+		mod_timer(&glue->timer, jiffies +
+				msecs_to_jiffies(wrp->poll_timeout));
 
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b2d9040c7685..4c481cd66c77 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1876,44 +1876,6 @@ err:
 	return retval;
 }
 
-static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver)
-{
-	int			i;
-	struct musb_hw_ep	*hw_ep;
-
-	/* don't disconnect if it's not connected */
-	if (musb->g.speed == USB_SPEED_UNKNOWN)
-		driver = NULL;
-	else
-		musb->g.speed = USB_SPEED_UNKNOWN;
-
-	/* deactivate the hardware */
-	if (musb->softconnect) {
-		musb->softconnect = 0;
-		musb_pullup(musb, 0);
-	}
-	musb_stop(musb);
-
-	/* killing any outstanding requests will quiesce the driver;
-	 * then report disconnect
-	 */
-	if (driver) {
-		for (i = 0, hw_ep = musb->endpoints;
-				i < musb->nr_endpoints;
-				i++, hw_ep++) {
-			musb_ep_select(musb->mregs, i);
-			if (hw_ep->is_shared_fifo /* || !epnum */) {
-				nuke(&hw_ep->ep_in, -ESHUTDOWN);
-			} else {
-				if (hw_ep->max_packet_sz_tx)
-					nuke(&hw_ep->ep_in, -ESHUTDOWN);
-				if (hw_ep->max_packet_sz_rx)
-					nuke(&hw_ep->ep_out, -ESHUTDOWN);
-			}
-		}
-	}
-}
-
 /*
  * Unregister the gadget driver. Used by gadget drivers when
  * unregistering themselves from the controller.
@@ -1940,7 +1902,7 @@ static int musb_gadget_stop(struct usb_gadget *g)
 	(void) musb_gadget_vbus_draw(&musb->g, 0);
 
 	musb->xceiv->otg->state = OTG_STATE_UNDEFINED;
-	stop_activity(musb, NULL);
+	musb_stop(musb);
 	otg_set_peripheral(musb->xceiv->otg, NULL);
 
 	musb->is_active = 0;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 294e159f4afe..86c4b533e90b 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -136,7 +136,7 @@ void musb_port_suspend(struct musb *musb, bool do_suspend)
 		/* later, GetPortStatus will stop RESUME signaling */
 		musb->port1_status |= MUSB_PORT_STAT_RESUME;
 		schedule_delayed_work(&musb->finish_resume_work,
-				      msecs_to_jiffies(20));
+				      msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 }
 
@@ -345,7 +345,7 @@ int musb_hub_control(
 		struct usb_hub_descriptor *desc = (void *)buf;
 
 		desc->bDescLength = 9;
-		desc->bDescriptorType = 0x29;
+		desc->bDescriptorType = USB_DT_HUB;
 		desc->bNbrPorts = 1;
 		desc->wHubCharacteristics = cpu_to_le16(
 			HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 52d3d58252e1..2175678e674e 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -139,7 +139,7 @@ config USB_ISP1301
 
 config USB_MSM_OTG
 	tristate "Qualcomm on-chip USB OTG controller support"
-	depends on (USB || USB_GADGET) && (ARCH_MSM || ARCH_QCOM || COMPILE_TEST)
+	depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
 	depends on RESET_CONTROLLER
 	select USB_PHY
 	help
@@ -202,13 +202,13 @@ config USB_RCAR_GEN2_PHY
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM || ARM64
+	select USB_ULPI_VIEWPORT
 	help
 	  Enable this to support ULPI connected USB OTG transceivers which
 	  are likely found on embedded boards.
 
 config USB_ULPI_VIEWPORT
 	bool
-	depends on USB_ULPI
 	help
 	  Provides read/write operations to the ULPI phy register set for
 	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
diff --git a/drivers/usb/phy/of.c b/drivers/usb/phy/of.c
index 7ea0154da9d5..66ffa82457a8 100644
--- a/drivers/usb/phy/of.c
+++ b/drivers/usb/phy/of.c
@@ -27,7 +27,7 @@ static const char *const usbphy_modes[] = {
  * @np:	Pointer to the given device_node
  *
  * The function gets phy interface string from property 'phy_type',
- * and returns the correspondig enum usb_phy_interface
+ * and returns the corresponding enum usb_phy_interface
  */
 enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
 {
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index f5b3b928941b..7225d526df04 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -893,7 +893,7 @@ static int abx500_usb_link_status_update(struct ab8500_usb *ab)
 
 /*
  * Disconnection Sequence:
- *   1. Disconect Interrupt
+ *   1. Disconnect Interrupt
  *   2. Disable regulators
  *   3. Disable AB clock
  *   4. Disable the Phy
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 70be50b734b2..deee68eafb72 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -62,14 +62,14 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
 	return 0;
 }
 
-static void nop_reset_set(struct usb_phy_generic *nop, int asserted)
+static void nop_reset(struct usb_phy_generic *nop)
 {
 	if (!nop->gpiod_reset)
 		return;
 
-	gpiod_direction_output(nop->gpiod_reset, !asserted);
+	gpiod_set_value(nop->gpiod_reset, 1);
 	usleep_range(10000, 20000);
-	gpiod_set_value(nop->gpiod_reset, asserted);
+	gpiod_set_value(nop->gpiod_reset, 0);
 }
 
 /* interface to regulator framework */
@@ -151,8 +151,7 @@ int usb_gen_phy_init(struct usb_phy *phy)
 	if (!IS_ERR(nop->clk))
 		clk_prepare_enable(nop->clk);
 
-	/* De-assert RESET */
-	nop_reset_set(nop, 0);
+	nop_reset(nop);
 
 	return 0;
 }
@@ -162,8 +161,7 @@ void usb_gen_phy_shutdown(struct usb_phy *phy)
 {
 	struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
 
-	/* Assert RESET */
-	nop_reset_set(nop, 1);
+	gpiod_set_value(nop->gpiod_reset, 1);
 
 	if (!IS_ERR(nop->clk))
 		clk_disable_unprepare(nop->clk);
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 6ed67ea4ef7e..c9156beeadef 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -258,9 +258,7 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
 {
 	int ret;
 
-	if (motg->pdata->link_clk_reset)
-		ret = motg->pdata->link_clk_reset(motg->clk, assert);
-	else if (assert)
+	if (assert)
 		ret = reset_control_assert(motg->link_rst);
 	else
 		ret = reset_control_deassert(motg->link_rst);
@@ -276,9 +274,7 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 {
 	int ret = 0;
 
-	if (motg->pdata->phy_clk_reset)
-		ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
-	else if (motg->phy_rst)
+	if (motg->phy_rst)
 		ret = reset_control_reset(motg->phy_rst);
 
 	if (ret)
@@ -1546,16 +1542,6 @@ static int msm_otg_probe(struct platform_device *pdev)
 	phy = &motg->phy;
 	phy->dev = &pdev->dev;
 
-	if (motg->pdata->phy_clk_reset) {
-		motg->phy_reset_clk = devm_clk_get(&pdev->dev,
-					   np ? "phy" : "usb_phy_clk");
-
-		if (IS_ERR(motg->phy_reset_clk)) {
-			dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
-			return PTR_ERR(motg->phy_reset_clk);
-		}
-	}
-
 	motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
 	if (IS_ERR(motg->clk)) {
 		dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
index f83808413ba2..f81800b6562a 100644
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -47,7 +47,7 @@ struct rcar_gen2_usb_phy_priv {
 
 /* USB General status register */
 #define USBHS_UGSTS_REG			0x88
-#define USBHS_UGSTS_LOCK		(3 << 8)
+#define USBHS_UGSTS_LOCK		(1 << 8)
 
 /* Enable USBHS internal phy */
 static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 2f9735b35338..d1cd6b50f520 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -81,7 +81,9 @@ static void devm_usb_phy_release(struct device *dev, void *res)
 
 static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
 {
-	return res == match_data;
+	struct usb_phy **phy = res;
+
+	return *phy == match_data;
 }
 
 /**
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 4cf77d3c3bd2..0f7e850fd4aa 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -276,6 +276,16 @@ int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
 }
 
 /*
+ *		interrupt functions
+ */
+void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
+{
+	u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
+
+	usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
+}
+
+/*
  *		local functions
  */
 static void usbhsc_set_buswait(struct usbhs_priv *priv)
@@ -487,6 +497,15 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
 	if (gpio > 0)
 		dparam->enable_gpio = gpio;
 
+	switch (dparam->type) {
+	case USBHS_TYPE_R8A7790:
+	case USBHS_TYPE_R8A7791:
+		dparam->has_usb_dmac = 1;
+		break;
+	default:
+		break;
+	}
+
 	return info;
 }
 
diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h
index fc96e924edc4..8c5fc12ad778 100644
--- a/drivers/usb/renesas_usbhs/common.h
+++ b/drivers/usb/renesas_usbhs/common.h
@@ -193,6 +193,7 @@ struct usbhs_priv;
 #define TYPE_BULK	(1 << 14)
 #define TYPE_INT	(2 << 14)
 #define TYPE_ISO	(3 << 14)
+#define BFRE		(1 << 10)	/* BRDY Interrupt Operation Spec. */
 #define DBLB		(1 << 9)	/* Double Buffer Mode */
 #define SHTNAK		(1 << 7)	/* Pipe Disable in Transfer End */
 #define DIR_OUT		(1 << 4)	/* Transfer Direction */
@@ -216,6 +217,7 @@ struct usbhs_priv;
 #define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
 #define SQCLR		(1 << 8)	/* Toggle Bit Clear */
 #define SQSET		(1 << 7)	/* Toggle Bit Set */
+#define SQMON		(1 << 6)	/* Toggle Bit Check */
 #define PBUSY		(1 << 5)	/* Pipe Busy */
 #define PID_MASK	(0x3)		/* Response PID */
 #define  PID_NAK	0
@@ -324,6 +326,11 @@ int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub,
 			   u16 hubport, u16 speed);
 
 /*
+ * interrupt functions
+ */
+void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit);
+
+/*
  * data
  */
 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev);
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index d891bff39d66..8597cf9cfceb 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -813,7 +813,8 @@ static void xfer_work(struct work_struct *work)
 	desc->callback		= usbhsf_dma_complete;
 	desc->callback_param	= pipe;
 
-	if (dmaengine_submit(desc) < 0) {
+	pkt->cookie = dmaengine_submit(desc);
+	if (pkt->cookie < 0) {
 		dev_err(dev, "Failed to submit dma descriptor\n");
 		return;
 	}
@@ -822,10 +823,10 @@ static void xfer_work(struct work_struct *work)
 		fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
 
 	usbhs_pipe_running(pipe, 1);
-	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
-	usbhs_pipe_enable(pipe);
 	usbhsf_dma_start(pipe, fifo);
+	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
 	dma_async_issue_pending(chan);
+	usbhs_pipe_enable(pipe);
 }
 
 /*
@@ -838,6 +839,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 	struct usbhs_fifo *fifo;
 	int len = pkt->length - pkt->actual;
 	int ret;
+	uintptr_t align_mask;
 
 	if (usbhs_pipe_is_busy(pipe))
 		return 0;
@@ -847,10 +849,14 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done)
 	    usbhs_pipe_is_dcp(pipe))
 		goto usbhsf_pio_prepare_push;
 
-	if (len & 0x7) /* 8byte alignment */
+	/* check data length if this driver don't use USB-DMAC */
+	if (!usbhs_get_dparam(priv, has_usb_dmac) && len & 0x7)
 		goto usbhsf_pio_prepare_push;
 
-	if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */
+	/* check buffer alignment */
+	align_mask = usbhs_get_dparam(priv, has_usb_dmac) ?
+					USBHS_USB_DMAC_XFER_SIZE - 1 : 0x7;
+	if ((uintptr_t)(pkt->buf + pkt->actual) & align_mask)
 		goto usbhsf_pio_prepare_push;
 
 	/* return at this time if the pipe is running */
@@ -924,7 +930,85 @@ struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = {
 /*
  *		DMA pop handler
  */
-static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
+
+static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt,
+					      int *is_done)
+{
+	return usbhsf_prepare_pop(pkt, is_done);
+}
+
+static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt,
+						int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo;
+	int ret;
+
+	if (usbhs_pipe_is_busy(pipe))
+		return 0;
+
+	/* use PIO if packet is less than pio_dma_border or pipe is DCP */
+	if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) ||
+	    usbhs_pipe_is_dcp(pipe))
+		goto usbhsf_pio_prepare_pop;
+
+	fifo = usbhsf_get_dma_fifo(priv, pkt);
+	if (!fifo)
+		goto usbhsf_pio_prepare_pop;
+
+	if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1))
+		goto usbhsf_pio_prepare_pop;
+
+	usbhs_pipe_config_change_bfre(pipe, 1);
+
+	ret = usbhsf_fifo_select(pipe, fifo, 0);
+	if (ret < 0)
+		goto usbhsf_pio_prepare_pop;
+
+	if (usbhsf_dma_map(pkt) < 0)
+		goto usbhsf_pio_prepare_pop_unselect;
+
+	/* DMA */
+
+	/*
+	 * usbhs_fifo_dma_pop_handler :: prepare
+	 * enabled irq to come here.
+	 * but it is no longer needed for DMA. disable it.
+	 */
+	usbhsf_rx_irq_ctrl(pipe, 0);
+
+	pkt->trans = pkt->length;
+
+	INIT_WORK(&pkt->work, xfer_work);
+	schedule_work(&pkt->work);
+
+	return 0;
+
+usbhsf_pio_prepare_pop_unselect:
+	usbhsf_fifo_unselect(pipe, fifo);
+usbhsf_pio_prepare_pop:
+
+	/*
+	 * change handler to PIO
+	 */
+	pkt->handler = &usbhs_fifo_pio_pop_handler;
+	usbhs_pipe_config_change_bfre(pipe, 0);
+
+	return pkt->handler->prepare(pkt, is_done);
+}
+
+static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	if (usbhs_get_dparam(priv, has_usb_dmac))
+		return usbhsf_dma_prepare_pop_with_usb_dmac(pkt, is_done);
+	else
+		return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done);
+}
+
+static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done)
 {
 	struct usbhs_pipe *pipe = pkt->pipe;
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -993,7 +1077,16 @@ usbhsf_pio_prepare_pop:
 	return pkt->handler->try_run(pkt, is_done);
 }
 
-static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
+static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	BUG_ON(usbhs_get_dparam(priv, has_usb_dmac));
+
+	return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done);
+}
+
+static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done)
 {
 	struct usbhs_pipe *pipe = pkt->pipe;
 	int maxp = usbhs_pipe_get_maxpacket(pipe);
@@ -1017,8 +1110,68 @@ static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
 	return 0;
 }
 
+static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt,
+					   struct dma_chan *chan, int dtln)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct dma_tx_state state;
+	size_t received_size;
+	int maxp = usbhs_pipe_get_maxpacket(pipe);
+
+	dmaengine_tx_status(chan, pkt->cookie, &state);
+	received_size = pkt->length - state.residue;
+
+	if (dtln) {
+		received_size -= USBHS_USB_DMAC_XFER_SIZE;
+		received_size &= ~(maxp - 1);
+		received_size += dtln;
+	}
+
+	return received_size;
+}
+
+static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt,
+					     int *is_done)
+{
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
+	int rcv_len;
+
+	/*
+	 * Since the driver disables rx_irq in DMA mode, the interrupt handler
+	 * cannot the BRDYSTS. So, the function clears it here because the
+	 * driver may use PIO mode next time.
+	 */
+	usbhs_xxxsts_clear(priv, BRDYSTS, usbhs_pipe_number(pipe));
+
+	rcv_len = usbhsf_fifo_rcv_len(priv, fifo);
+	usbhsf_fifo_clear(pipe, fifo);
+	pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len);
+
+	usbhsf_dma_stop(pipe, fifo);
+	usbhsf_dma_unmap(pkt);
+	usbhsf_fifo_unselect(pipe, pipe->fifo);
+
+	/* The driver can assume the rx transaction is always "done" */
+	*is_done = 1;
+
+	return 0;
+}
+
+static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe);
+
+	if (usbhs_get_dparam(priv, has_usb_dmac))
+		return usbhsf_dma_pop_done_with_usb_dmac(pkt, is_done);
+	else
+		return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done);
+}
+
 struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = {
-	.prepare	= usbhsf_prepare_pop,
+	.prepare	= usbhsf_dma_prepare_pop,
 	.try_run	= usbhsf_dma_try_pop,
 	.dma_done	= usbhsf_dma_pop_done
 };
@@ -1069,23 +1222,29 @@ static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo)
 					    &fifo->rx_slave);
 }
 
-static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo)
+static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo,
+			       int channel)
 {
-	fifo->tx_chan = dma_request_slave_channel_reason(dev, "tx");
+	char name[16];
+
+	snprintf(name, sizeof(name), "tx%d", channel);
+	fifo->tx_chan = dma_request_slave_channel_reason(dev, name);
 	if (IS_ERR(fifo->tx_chan))
 		fifo->tx_chan = NULL;
-	fifo->rx_chan = dma_request_slave_channel_reason(dev, "rx");
+
+	snprintf(name, sizeof(name), "rx%d", channel);
+	fifo->rx_chan = dma_request_slave_channel_reason(dev, name);
 	if (IS_ERR(fifo->rx_chan))
 		fifo->rx_chan = NULL;
 }
 
-static void usbhsf_dma_init(struct usbhs_priv *priv,
-			    struct usbhs_fifo *fifo)
+static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo,
+			    int channel)
 {
 	struct device *dev = usbhs_priv_to_dev(priv);
 
 	if (dev->of_node)
-		usbhsf_dma_init_dt(dev, fifo);
+		usbhsf_dma_init_dt(dev, fifo, channel);
 	else
 		usbhsf_dma_init_pdev(fifo);
 
@@ -1231,7 +1390,7 @@ do {									\
 			usbhs_get_dparam(priv, d##channel##_tx_id);	\
 	fifo->rx_slave.shdma_slave.slave_id =				\
 			usbhs_get_dparam(priv, d##channel##_rx_id);	\
-	usbhsf_dma_init(priv, fifo);					\
+	usbhsf_dma_init(priv, fifo, channel);				\
 } while (0)
 
 #define USBHS_DFIFO_INIT(priv, fifo, channel)				\
diff --git a/drivers/usb/renesas_usbhs/fifo.h b/drivers/usb/renesas_usbhs/fifo.h
index f07037c1185f..04d3f8abad9e 100644
--- a/drivers/usb/renesas_usbhs/fifo.h
+++ b/drivers/usb/renesas_usbhs/fifo.h
@@ -58,6 +58,7 @@ struct usbhs_pkt {
 		     struct usbhs_pkt *pkt);
 	struct work_struct work;
 	dma_addr_t dma;
+	dma_cookie_t cookie;
 	void *buf;
 	int length;
 	int trans;
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index e0384af77e56..dc2aa3261202 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -119,18 +119,34 @@ struct usbhsg_recip_handle {
 /*
  *		queue push/pop
  */
-static void usbhsg_queue_pop(struct usbhsg_uep *uep,
-			     struct usbhsg_request *ureq,
-			     int status)
+static void __usbhsg_queue_pop(struct usbhsg_uep *uep,
+			       struct usbhsg_request *ureq,
+			       int status)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
 	struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep);
 	struct device *dev = usbhsg_gpriv_to_dev(gpriv);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 
 	dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe));
 
 	ureq->req.status = status;
+	spin_unlock(usbhs_priv_to_lock(priv));
 	usb_gadget_giveback_request(&uep->ep, &ureq->req);
+	spin_lock(usbhs_priv_to_lock(priv));
+}
+
+static void usbhsg_queue_pop(struct usbhsg_uep *uep,
+			     struct usbhsg_request *ureq,
+			     int status)
+{
+	struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep);
+	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
+	__usbhsg_queue_pop(uep, ureq, status);
+	usbhs_unlock(priv, flags);
 }
 
 static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 96eead619282..bd050359926c 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1229,7 +1229,7 @@ static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv,
 		break;
 
 	case GetHubDescriptor:
-		desc->bDescriptorType		= 0x29;
+		desc->bDescriptorType		= USB_DT_HUB;
 		desc->bHubContrCurrent		= 0;
 		desc->bNbrPorts			= roothub_id;
 		desc->bDescLength		= 9;
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index 007f45abe96c..4f9c3356127a 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -84,6 +84,17 @@ static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
 		usbhs_bset(priv, pipe_reg, mask, val);
 }
 
+static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
+				 u16 dcp_reg, u16 pipe_reg)
+{
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return usbhs_read(priv, dcp_reg);
+	else
+		return usbhs_read(priv, pipe_reg);
+}
+
 /*
  *		DCPCFG/PIPECFG functions
  */
@@ -92,6 +103,11 @@ static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 	__usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
 }
 
+static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe)
+{
+	return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG);
+}
+
 /*
  *		PIPEnTRN/PIPEnTRE functions
  */
@@ -616,6 +632,11 @@ void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
 	usbhsp_pipectrl_set(pipe, mask, val);
 }
 
+static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe)
+{
+	return !!(usbhsp_pipectrl_get(pipe) & SQMON);
+}
+
 void usbhs_pipe_clear(struct usbhs_pipe *pipe)
 {
 	if (usbhs_pipe_is_dcp(pipe)) {
@@ -626,6 +647,24 @@ void usbhs_pipe_clear(struct usbhs_pipe *pipe)
 	}
 }
 
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
+{
+	int sequence;
+
+	if (usbhs_pipe_is_dcp(pipe))
+		return;
+
+	usbhsp_pipe_select(pipe);
+	/* check if the driver needs to change the BFRE value */
+	if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE)))
+		return;
+
+	sequence = usbhs_pipe_get_data_sequence(pipe);
+	usbhsp_pipe_cfg_set(pipe, BFRE, enable ? BFRE : 0);
+	usbhs_pipe_clear(pipe);
+	usbhs_pipe_data_sequence(pipe, sequence);
+}
+
 static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
 {
 	struct usbhs_pipe *pos, *pipe;
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index d24a05972370..b0bc7b603016 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -97,6 +97,7 @@ void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len);
 void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo);
 void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
 			      u16 epnum, u16 maxp);
+void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable);
 
 #define usbhs_pipe_sequence_data0(pipe)	usbhs_pipe_data_sequence(pipe, 0)
 #define usbhs_pipe_sequence_data1(pipe)	usbhs_pipe_data_sequence(pipe, 1)
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ede4f5fcfadd..c73808f095bb 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -325,7 +325,6 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (r) {
 		dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
 			__func__, r);
-		ch341_close(port);
 		goto out;
 	}
 
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index c5dc233db2d9..972f5a5fe577 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -19,10 +19,11 @@
 #include <linux/serial.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1934, 0x0706) },
@@ -30,37 +31,218 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-#define CONTROL_DTR			0x01
-#define CONTROL_RTS			0x02
+/* Maximum baudrate for F81232 */
+#define F81232_MAX_BAUDRATE		115200
 
-#define UART_STATE			0x08
-#define UART_STATE_TRANSIENT_MASK	0x74
-#define UART_DCD			0x01
-#define UART_DSR			0x02
-#define UART_BREAK_ERROR		0x04
-#define UART_RING			0x08
-#define UART_FRAME_ERROR		0x10
-#define UART_PARITY_ERROR		0x20
-#define UART_OVERRUN_ERROR		0x40
-#define UART_CTS			0x80
+/* USB Control EP parameter */
+#define F81232_REGISTER_REQUEST		0xa0
+#define F81232_GET_REGISTER		0xc0
+#define F81232_SET_REGISTER		0x40
+
+#define SERIAL_BASE_ADDRESS		0x0120
+#define RECEIVE_BUFFER_REGISTER		(0x00 + SERIAL_BASE_ADDRESS)
+#define INTERRUPT_ENABLE_REGISTER	(0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER		(0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER		(0x03 + SERIAL_BASE_ADDRESS)
+#define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
+#define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
 
 struct f81232_private {
-	spinlock_t lock;
-	u8 line_control;
-	u8 line_status;
+	struct mutex lock;
+	u8 modem_control;
+	u8 modem_status;
+	struct work_struct interrupt_work;
+	struct usb_serial_port *port;
 };
 
+static int calc_baud_divisor(speed_t baudrate)
+{
+	return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate);
+}
+
+static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
+{
+	int status;
+	u8 *tmp;
+	struct usb_device *dev = port->serial->dev;
+
+	tmp = kmalloc(sizeof(*val), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	status = usb_control_msg(dev,
+				usb_rcvctrlpipe(dev, 0),
+				F81232_REGISTER_REQUEST,
+				F81232_GET_REGISTER,
+				reg,
+				0,
+				tmp,
+				sizeof(*val),
+				USB_CTRL_GET_TIMEOUT);
+	if (status != sizeof(*val)) {
+		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+		if (status < 0)
+			status = usb_translate_errors(status);
+		else
+			status = -EIO;
+	} else {
+		status = 0;
+		*val = *tmp;
+	}
+
+	kfree(tmp);
+	return status;
+}
+
+static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
+{
+	int status;
+	u8 *tmp;
+	struct usb_device *dev = port->serial->dev;
+
+	tmp = kmalloc(sizeof(val), GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	*tmp = val;
+
+	status = usb_control_msg(dev,
+				usb_sndctrlpipe(dev, 0),
+				F81232_REGISTER_REQUEST,
+				F81232_SET_REGISTER,
+				reg,
+				0,
+				tmp,
+				sizeof(val),
+				USB_CTRL_SET_TIMEOUT);
+	if (status != sizeof(val)) {
+		dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
+
+		if (status < 0)
+			status = usb_translate_errors(status);
+		else
+			status = -EIO;
+	} else {
+		status = 0;
+	}
+
+	kfree(tmp);
+	return status;
+}
+
+static void f81232_read_msr(struct usb_serial_port *port)
+{
+	int status;
+	u8 current_msr;
+	struct tty_struct *tty;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	mutex_lock(&priv->lock);
+	status = f81232_get_register(port, MODEM_STATUS_REGISTER,
+			&current_msr);
+	if (status) {
+		dev_err(&port->dev, "%s fail, status: %d\n", __func__, status);
+		mutex_unlock(&priv->lock);
+		return;
+	}
+
+	if (!(current_msr & UART_MSR_ANY_DELTA)) {
+		mutex_unlock(&priv->lock);
+		return;
+	}
+
+	priv->modem_status = current_msr;
+
+	if (current_msr & UART_MSR_DCTS)
+		port->icount.cts++;
+	if (current_msr & UART_MSR_DDSR)
+		port->icount.dsr++;
+	if (current_msr & UART_MSR_TERI)
+		port->icount.rng++;
+	if (current_msr & UART_MSR_DDCD) {
+		port->icount.dcd++;
+		tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			usb_serial_handle_dcd_change(port, tty,
+					current_msr & UART_MSR_DCD);
+
+			tty_kref_put(tty);
+		}
+	}
+
+	wake_up_interruptible(&port->port.delta_msr_wait);
+	mutex_unlock(&priv->lock);
+}
+
+static int f81232_set_mctrl(struct usb_serial_port *port,
+					   unsigned int set, unsigned int clear)
+{
+	u8 val;
+	int status;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+		return 0;	/* no change */
+
+	/* 'set' takes precedence over 'clear' */
+	clear &= ~set;
+
+	/* force enable interrupt with OUT2 */
+	mutex_lock(&priv->lock);
+	val = UART_MCR_OUT2 | priv->modem_control;
+
+	if (clear & TIOCM_DTR)
+		val &= ~UART_MCR_DTR;
+
+	if (clear & TIOCM_RTS)
+		val &= ~UART_MCR_RTS;
+
+	if (set & TIOCM_DTR)
+		val |= UART_MCR_DTR;
+
+	if (set & TIOCM_RTS)
+		val |= UART_MCR_RTS;
+
+	dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
+			val, priv->modem_control);
+
+	status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val);
+	if (status) {
+		dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
+		mutex_unlock(&priv->lock);
+		return status;
+	}
+
+	priv->modem_control = val;
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
 static void f81232_update_line_status(struct usb_serial_port *port,
 				      unsigned char *data,
-				      unsigned int actual_length)
+				      size_t actual_length)
 {
-	/*
-	 * FIXME: Update port->icount, and call
-	 *
-	 *		wake_up_interruptible(&port->port.delta_msr_wait);
-	 *
-	 *	  on MSR changes.
-	 */
+	struct f81232_private *priv = usb_get_serial_port_data(port);
+
+	if (!actual_length)
+		return;
+
+	switch (data[0] & 0x07) {
+	case 0x00: /* msr change */
+		dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]);
+		schedule_work(&priv->interrupt_work);
+		break;
+	case 0x02: /* tx-empty */
+		break;
+	case 0x04: /* rx data available */
+		break;
+	case 0x06: /* lsr change */
+		/* we can forget it. the LSR will read from bulk-in */
+		dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]);
+		break;
+	}
 }
 
 static void f81232_read_int_callback(struct urb *urb)
@@ -104,55 +286,55 @@ exit:
 static void f81232_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct f81232_private *priv = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
-	char tty_flag = TTY_NORMAL;
-	unsigned long flags;
-	u8 line_status;
-	int i;
-
-	/* update line status */
-	spin_lock_irqsave(&priv->lock, flags);
-	line_status = priv->line_status;
-	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!urb->actual_length)
+	char tty_flag;
+	unsigned int i;
+	u8 lsr;
+
+	/*
+	 * When opening the port we get a 1-byte packet with the current LSR,
+	 * which we discard.
+	 */
+	if ((urb->actual_length < 2) || (urb->actual_length % 2))
 		return;
 
-	/* break takes precedence over parity, */
-	/* which takes precedence over framing errors */
-	if (line_status & UART_BREAK_ERROR)
-		tty_flag = TTY_BREAK;
-	else if (line_status & UART_PARITY_ERROR)
-		tty_flag = TTY_PARITY;
-	else if (line_status & UART_FRAME_ERROR)
-		tty_flag = TTY_FRAME;
-	dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
-
-	/* overrun is special, not associated with a char */
-	if (line_status & UART_OVERRUN_ERROR)
-		tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
-
-	if (port->port.console && port->sysrq) {
-		for (i = 0; i < urb->actual_length; ++i)
-			if (!usb_serial_handle_sysrq_char(port, data[i]))
-				tty_insert_flip_char(&port->port, data[i],
-						tty_flag);
-	} else {
-		tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
-							urb->actual_length);
+	/* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */
+
+	for (i = 0; i < urb->actual_length; i += 2) {
+		tty_flag = TTY_NORMAL;
+		lsr = data[i];
+
+		if (lsr & UART_LSR_BRK_ERROR_BITS) {
+			if (lsr & UART_LSR_BI) {
+				tty_flag = TTY_BREAK;
+				port->icount.brk++;
+				usb_serial_handle_break(port);
+			} else if (lsr & UART_LSR_PE) {
+				tty_flag = TTY_PARITY;
+				port->icount.parity++;
+			} else if (lsr & UART_LSR_FE) {
+				tty_flag = TTY_FRAME;
+				port->icount.frame++;
+			}
+
+			if (lsr & UART_LSR_OE) {
+				port->icount.overrun++;
+				tty_insert_flip_char(&port->port, 0,
+						TTY_OVERRUN);
+			}
+		}
+
+		if (port->port.console && port->sysrq) {
+			if (usb_serial_handle_sysrq_char(port, data[i + 1]))
+				continue;
+		}
+
+		tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
 	}
 
 	tty_flip_buffer_push(&port->port);
 }
 
-static int set_control_lines(struct usb_device *dev, u8 value)
-{
-	/* FIXME - Stubbed out for now */
-	return 0;
-}
-
 static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 {
 	/* FIXME - Stubbed out for now */
@@ -164,37 +346,198 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
 	 */
 }
 
+static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
+{
+	u8 lcr;
+	int divisor;
+	int status = 0;
+
+	divisor = calc_baud_divisor(baudrate);
+
+	status = f81232_get_register(port, LINE_CONTROL_REGISTER,
+			 &lcr); /* get LCR */
+	if (status) {
+		dev_err(&port->dev, "%s failed to get LCR: %d\n",
+			__func__, status);
+		return;
+	}
+
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+			 lcr | UART_LCR_DLAB); /* Enable DLAB */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+			__func__, status);
+		return;
+	}
+
+	status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
+			 divisor & 0x00ff); /* low */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
+			__func__, status);
+		goto reapply_lcr;
+	}
+
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+			 (divisor & 0xff00) >> 8); /* high */
+	if (status) {
+		dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
+			__func__, status);
+	}
+
+reapply_lcr:
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER,
+			lcr & ~UART_LCR_DLAB);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set DLAB: %d\n",
+			__func__, status);
+	}
+}
+
+static int f81232_port_enable(struct usb_serial_port *port)
+{
+	u8 val;
+	int status;
+
+	/* fifo on, trigger8, clear TX/RX*/
+	val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+			UART_FCR_CLEAR_XMIT;
+
+	status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set FCR: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	/* MSR Interrupt only, LSR will read from Bulk-in odd byte */
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
+			UART_IER_MSI);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set IER: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
+static int f81232_port_disable(struct usb_serial_port *port)
+{
+	int status;
+
+	status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set IER: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
 static void f81232_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	/* FIXME - Stubbed out for now */
+	u8 new_lcr = 0;
+	int status = 0;
+	speed_t baudrate;
 
 	/* Don't change anything if nothing has changed */
 	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
 		return;
 
-	/* Do the real work here... */
-	if (old_termios)
-		tty_termios_copy_hw(&tty->termios, old_termios);
+	if (C_BAUD(tty) == B0)
+		f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+		f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+	baudrate = tty_get_baud_rate(tty);
+	if (baudrate > 0) {
+		if (baudrate > F81232_MAX_BAUDRATE) {
+			baudrate = F81232_MAX_BAUDRATE;
+			tty_encode_baud_rate(tty, baudrate, baudrate);
+		}
+		f81232_set_baudrate(port, baudrate);
+	}
+
+	if (C_PARENB(tty)) {
+		new_lcr |= UART_LCR_PARITY;
+
+		if (!C_PARODD(tty))
+			new_lcr |= UART_LCR_EPAR;
+
+		if (C_CMSPAR(tty))
+			new_lcr |= UART_LCR_SPAR;
+	}
+
+	if (C_CSTOPB(tty))
+		new_lcr |= UART_LCR_STOP;
+
+	switch (C_CSIZE(tty)) {
+	case CS5:
+		new_lcr |= UART_LCR_WLEN5;
+		break;
+	case CS6:
+		new_lcr |= UART_LCR_WLEN6;
+		break;
+	case CS7:
+		new_lcr |= UART_LCR_WLEN7;
+		break;
+	default:
+	case CS8:
+		new_lcr |= UART_LCR_WLEN8;
+		break;
+	}
+
+	status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
+	if (status) {
+		dev_err(&port->dev, "%s failed to set LCR: %d\n",
+			__func__, status);
+	}
 }
 
 static int f81232_tiocmget(struct tty_struct *tty)
 {
-	/* FIXME - Stubbed out for now */
-	return 0;
+	int r;
+	struct usb_serial_port *port = tty->driver_data;
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+	u8 mcr, msr;
+
+	/* force get current MSR changed state */
+	f81232_read_msr(port);
+
+	mutex_lock(&port_priv->lock);
+	mcr = port_priv->modem_control;
+	msr = port_priv->modem_status;
+	mutex_unlock(&port_priv->lock);
+
+	r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+		(mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+		(msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+		(msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+		(msr & UART_MSR_RI ? TIOCM_RI : 0) |
+		(msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+	return r;
 }
 
 static int f81232_tiocmset(struct tty_struct *tty,
 			unsigned int set, unsigned int clear)
 {
-	/* FIXME - Stubbed out for now */
-	return 0;
+	struct usb_serial_port *port = tty->driver_data;
+
+	return f81232_set_mctrl(port, set, clear);
 }
 
 static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result;
 
+	result = f81232_port_enable(port);
+	if (result)
+		return result;
+
 	/* Setup termios */
 	if (tty)
 		f81232_set_termios(tty, port, NULL);
@@ -217,59 +560,73 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void f81232_close(struct usb_serial_port *port)
 {
+	f81232_port_disable(port);
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
 {
-	struct f81232_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-	u8 control;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	/* Change DTR and RTS */
 	if (on)
-		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+		f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
 	else
-		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-	control = priv->line_control;
-	spin_unlock_irqrestore(&priv->lock, flags);
-	set_control_lines(port->serial->dev, control);
+		f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
 }
 
 static int f81232_carrier_raised(struct usb_serial_port *port)
 {
+	u8 msr;
 	struct f81232_private *priv = usb_get_serial_port_data(port);
-	if (priv->line_status & UART_DCD)
+
+	mutex_lock(&priv->lock);
+	msr = priv->modem_status;
+	mutex_unlock(&priv->lock);
+
+	if (msr & UART_MSR_DCD)
 		return 1;
 	return 0;
 }
 
+static int f81232_get_serial_info(struct usb_serial_port *port,
+		unsigned long arg)
+{
+	struct serial_struct ser;
+
+	memset(&ser, 0, sizeof(ser));
+
+	ser.type = PORT_16550A;
+	ser.line = port->minor;
+	ser.port = port->port_number;
+	ser.baud_base = F81232_MAX_BAUDRATE;
+
+	if (copy_to_user((void __user *)arg, &ser, sizeof(ser)))
+		return -EFAULT;
+
+	return 0;
+}
+
 static int f81232_ioctl(struct tty_struct *tty,
 			unsigned int cmd, unsigned long arg)
 {
-	struct serial_struct ser;
 	struct usb_serial_port *port = tty->driver_data;
 
 	switch (cmd) {
 	case TIOCGSERIAL:
-		memset(&ser, 0, sizeof ser);
-		ser.type = PORT_16654;
-		ser.line = port->minor;
-		ser.port = port->port_number;
-		ser.baud_base = 460800;
-
-		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
-			return -EFAULT;
-
-		return 0;
+		return f81232_get_serial_info(port, arg);
 	default:
 		break;
 	}
 	return -ENOIOCTLCMD;
 }
 
+static void  f81232_interrupt_work(struct work_struct *work)
+{
+	struct f81232_private *priv =
+		container_of(work, struct f81232_private, interrupt_work);
+
+	f81232_read_msr(priv->port);
+}
+
 static int f81232_port_probe(struct usb_serial_port *port)
 {
 	struct f81232_private *priv;
@@ -278,11 +635,13 @@ static int f81232_port_probe(struct usb_serial_port *port)
 	if (!priv)
 		return -ENOMEM;
 
-	spin_lock_init(&priv->lock);
+	mutex_init(&priv->lock);
+	INIT_WORK(&priv->interrupt_work,  f81232_interrupt_work);
 
 	usb_set_serial_port_data(port, priv);
 
 	port->port.drain_delay = 256;
+	priv->port = port;
 
 	return 0;
 }
@@ -308,7 +667,7 @@ static struct usb_serial_driver f81232_device = {
 	.bulk_out_size =	256,
 	.open =			f81232_open,
 	.close =		f81232_close,
-	.dtr_rts = 		f81232_dtr_rts,
+	.dtr_rts =		f81232_dtr_rts,
 	.carrier_raised =	f81232_carrier_raised,
 	.ioctl =		f81232_ioctl,
 	.break_ctl =		f81232_break_ctl,
@@ -330,5 +689,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
-MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");
+MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 62c2d9daa7d6..4b55ab66a534 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -207,7 +207,8 @@ static struct alauda_card_info alauda_card_ids[] = {
 	{ 0,}
 };
 
-static struct alauda_card_info *alauda_card_find_id(unsigned char id) {
+static struct alauda_card_info *alauda_card_find_id(unsigned char id)
+{
 	int i;
 
 	for (i = 0; alauda_card_ids[i].id != 0; i++)
@@ -223,7 +224,8 @@ static struct alauda_card_info *alauda_card_find_id(unsigned char id) {
 static unsigned char parity[256];
 static unsigned char ecc2[256];
 
-static void nand_init_ecc(void) {
+static void nand_init_ecc(void)
+{
 	int i, j, a;
 
 	parity[0] = 0;
@@ -247,7 +249,8 @@ static void nand_init_ecc(void) {
 }
 
 /* compute 3-byte ecc on 256 bytes */
-static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
+static void nand_compute_ecc(unsigned char *data, unsigned char *ecc)
+{
 	int i, j, a;
 	unsigned char par = 0, bit, bits[8] = {0};
 
@@ -270,11 +273,13 @@ static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
 	ecc[2] = ecc2[par];
 }
 
-static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
+static int nand_compare_ecc(unsigned char *data, unsigned char *ecc)
+{
 	return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
 }
 
-static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
+static void nand_store_ecc(unsigned char *data, unsigned char *ecc)
+{
 	memcpy(data, ecc, 3);
 }
 
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 8514a2d82b72..b3466d1395f2 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -96,13 +96,13 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 	if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
 		goto invalid_fld;
 	/* check protocol */
-	switch((save_cmnd[1] >> 1) & 0xf) {
-		case 3: /*no DATA */
-		case 4: /* PIO in */
-		case 5: /* PIO out */
-			break;
-		default:
-			goto invalid_fld;
+	switch ((save_cmnd[1] >> 1) & 0xf) {
+	case 3: /*no DATA */
+	case 4: /* PIO in */
+	case 5: /* PIO out */
+		break;
+	default:
+		goto invalid_fld;
 	}
 
 	/* first build the ATACB command */
@@ -132,8 +132,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 					|| save_cmnd[11])
 				goto invalid_fld;
 		}
-	}
-	else { /* ATA12 */
+	} else { /* ATA12 */
 		srb->cmnd[ 6] = save_cmnd[3]; /* features */
 		srb->cmnd[ 7] = save_cmnd[4]; /* sector count */
 		srb->cmnd[ 8] = save_cmnd[5]; /* lba low */
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 599d8bff26c3..076178645ba4 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -737,7 +737,7 @@ static void isd200_log_config(struct us_data *us, struct isd200_info *info)
 		     info->ConfigData.ATAExtraConfig & ATACFGE_CONF_DESC2);
 	usb_stor_dbg(us, "      Skip Device Boot: 0x%x\n",
 		     info->ConfigData.ATAExtraConfig & ATACFGE_SKIP_BOOT);
-	usb_stor_dbg(us, "      ATA 3 State Supsend: 0x%x\n",
+	usb_stor_dbg(us, "      ATA 3 State Suspend: 0x%x\n",
 		     info->ConfigData.ATAExtraConfig & ATACFGE_STATE_SUSPEND);
 	usb_stor_dbg(us, "      Descriptor Override: 0x%x\n",
 		     info->ConfigData.ATAExtraConfig & ATACFGE_DESC_OVERRIDE);
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 11f6f61c2381..e9ef1eccdace 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -216,7 +216,7 @@ done:
 static inline void hub_descriptor(struct usb_hub_descriptor *desc)
 {
 	memset(desc, 0, sizeof(*desc));
-	desc->bDescriptorType = 0x29;
+	desc->bDescriptorType = USB_DT_HUB;
 	desc->bDescLength = 9;
 	desc->wHubCharacteristics = __constant_cpu_to_le16(
 		HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index aa5af817f31c..a082fe62b1f0 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -182,7 +182,7 @@ static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue,
 	if (wLength < length)
 		return -ENOSPC;
 	descr->bDescLength = 7 + 2 * temp;
-	descr->bDescriptorType = 0x29;	/* HUB type */
+	descr->bDescriptorType = USB_DT_HUB; /* HUB type */
 	descr->bNbrPorts = wusbhc->ports_max;
 	descr->wHubCharacteristics = cpu_to_le16(
 		HUB_CHAR_COMMON_LPSM	/* All ports power at once */
diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c
index 88a290f57ea0..c8571405146d 100644
--- a/drivers/uwb/umc-bus.c
+++ b/drivers/uwb/umc-bus.c
@@ -163,38 +163,6 @@ static int umc_device_remove(struct device *dev)
 	return 0;
 }
 
-static int umc_device_suspend(struct device *dev, pm_message_t state)
-{
-	struct umc_dev *umc;
-	struct umc_driver *umc_driver;
-	int err = 0;
-
-	umc = to_umc_dev(dev);
-
-	if (dev->driver) {
-		umc_driver = to_umc_driver(dev->driver);
-		if (umc_driver->suspend)
-			err = umc_driver->suspend(umc, state);
-	}
-	return err;
-}
-
-static int umc_device_resume(struct device *dev)
-{
-	struct umc_dev *umc;
-	struct umc_driver *umc_driver;
-	int err = 0;
-
-	umc = to_umc_dev(dev);
-
-	if (dev->driver) {
-		umc_driver = to_umc_driver(dev->driver);
-		if (umc_driver->resume)
-			err = umc_driver->resume(umc);
-	}
-	return err;
-}
-
 static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct umc_dev *umc = to_umc_dev(dev);
@@ -223,8 +191,6 @@ struct bus_type umc_bus_type = {
 	.match		= umc_bus_match,
 	.probe		= umc_device_probe,
 	.remove		= umc_device_remove,
-	.suspend        = umc_device_suspend,
-	.resume         = umc_device_resume,
 	.dev_groups	= umc_dev_groups,
 };
 EXPORT_SYMBOL_GPL(umc_bus_type);
diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c
index 46b7cfcdfbca..c3ee39a04ea8 100644
--- a/drivers/uwb/whci.c
+++ b/drivers/uwb/whci.c
@@ -133,8 +133,7 @@ static void whci_del_cap(struct whci_card *card, int n)
 {
 	struct umc_dev *umc = card->devs[n];
 
-	if (umc != NULL)
-		umc_device_unregister(umc);
+	umc_device_unregister(umc);
 }
 
 static int whci_n_caps(struct pci_dev *pci)