Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

udplite conflict is resolved by taking what 'net-next' did
which removed the backlog receive method assignment, since
it is no longer necessary.

Two entries were added to the non-priv ethtool operations
switch statement, one in 'net' and one in 'net-next, so
simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

57 files changed, 581 insertions, 278 deletions

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index deb0ff78eba8..54abb26b7366 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -47,32 +47,15 @@ static void acpi_sleep_tts_switch(u32 acpi_state)
 	}
 }
 
-static void acpi_sleep_pts_switch(u32 acpi_state)
-{
-	acpi_status status;
-
-	status = acpi_execute_simple_method(NULL, "\\_PTS", acpi_state);
-	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
-		/*
-		 * OS can't evaluate the _PTS object correctly. Some warning
-		 * message will be printed. But it won't break anything.
-		 */
-		printk(KERN_NOTICE "Failure in evaluating _PTS object\n");
-	}
-}
-
-static int sleep_notify_reboot(struct notifier_block *this,
+static int tts_notify_reboot(struct notifier_block *this,
 			unsigned long code, void *x)
 {
 	acpi_sleep_tts_switch(ACPI_STATE_S5);
-
-	acpi_sleep_pts_switch(ACPI_STATE_S5);
-
 	return NOTIFY_DONE;
 }
 
-static struct notifier_block sleep_notifier = {
-	.notifier_call	= sleep_notify_reboot,
+static struct notifier_block tts_notifier = {
+	.notifier_call	= tts_notify_reboot,
 	.next		= NULL,
 	.priority	= 0,
 };
@@ -916,9 +899,9 @@ int __init acpi_sleep_init(void)
 	pr_info(PREFIX "(supports%s)\n", supported);
 
 	/*
-	 * Register the sleep_notifier to reboot notifier list so that the _TTS
-	 * and _PTS object can also be evaluated when the system enters S5.
+	 * Register the tts_notifier to reboot notifier list so that the _TTS
+	 * object can also be evaluated when the system enters S5.
 	 */
-	register_reboot_notifier(&sleep_notifier);
+	register_reboot_notifier(&tts_notifier);
 	return 0;
 }
diff --git a/drivers/clk/berlin/bg2.c b/drivers/clk/berlin/bg2.c
index edf3b96b3b73..1d99292e2039 100644
--- a/drivers/clk/berlin/bg2.c
+++ b/drivers/clk/berlin/bg2.c
@@ -685,7 +685,7 @@ static void __init berlin2_clock_setup(struct device_node *np)
 	}
 
 	/* register clk-provider */
-	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, &clk_data);
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
 
 	return;
 
diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c
index 0718e831475f..3b784b593afd 100644
--- a/drivers/clk/berlin/bg2q.c
+++ b/drivers/clk/berlin/bg2q.c
@@ -382,7 +382,7 @@ static void __init berlin2q_clock_setup(struct device_node *np)
 	}
 
 	/* register clk-provider */
-	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, &clk_data);
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
 
 	return;
 
diff --git a/drivers/clk/clk-efm32gg.c b/drivers/clk/clk-efm32gg.c
index 8802a2dd56ac..f674778fb3ac 100644
--- a/drivers/clk/clk-efm32gg.c
+++ b/drivers/clk/clk-efm32gg.c
@@ -82,6 +82,6 @@ static void __init efm32gg_cmu_init(struct device_node *np)
 	hws[clk_HFPERCLKDAC0] = clk_hw_register_gate(NULL, "HFPERCLK.DAC0",
 			"HFXO", 0, base + CMU_HFPERCLKEN0, 17, 0, NULL);
 
-	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, &clk_data);
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
 }
 CLK_OF_DECLARE(efm32ggcmu, "efm32gg,cmu", efm32gg_cmu_init);
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index 79596463e0d9..4a82a49cff5e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -191,6 +191,8 @@ static struct clk_div_table axi_div_table[] = {
 static SUNXI_CCU_DIV_TABLE(axi_clk, "axi", "cpu",
 			   0x050, 0, 3, axi_div_table, 0);
 
+#define SUN6I_A31_AHB1_REG  0x054
+
 static const char * const ahb1_parents[] = { "osc32k", "osc24M",
 					     "axi", "pll-periph" };
 
@@ -1230,6 +1232,16 @@ static void __init sun6i_a31_ccu_setup(struct device_node *node)
 	val &= BIT(16);
 	writel(val, reg + SUN6I_A31_PLL_MIPI_REG);
 
+	/* Force AHB1 to PLL6 / 3 */
+	val = readl(reg + SUN6I_A31_AHB1_REG);
+	/* set PLL6 pre-div = 3 */
+	val &= ~GENMASK(7, 6);
+	val |= 0x2 << 6;
+	/* select PLL6 / pre-div */
+	val &= ~GENMASK(13, 12);
+	val |= 0x3 << 12;
+	writel(val, reg + SUN6I_A31_AHB1_REG);
+
 	sunxi_ccu_probe(node, reg, &sun6i_a31_ccu_desc);
 
 	ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk,
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 838b22aa8b67..f2c9274b8bd5 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -373,7 +373,7 @@ static void sun4i_get_apb1_factors(struct factors_request *req)
 	else
 		calcp = 3;
 
-	calcm = (req->parent_rate >> calcp) - 1;
+	calcm = (div >> calcp) - 1;
 
 	req->rate = (req->parent_rate >> calcp) / (calcm + 1);
 	req->m = calcm;
diff --git a/drivers/dax/dax.c b/drivers/dax/dax.c
index 0e499bfca41c..3d94ff20fdca 100644
--- a/drivers/dax/dax.c
+++ b/drivers/dax/dax.c
@@ -270,8 +270,8 @@ static int check_vma(struct dax_dev *dax_dev, struct vm_area_struct *vma,
 	if (!dax_dev->alive)
 		return -ENXIO;
 
-	/* prevent private / writable mappings from being established */
-	if ((vma->vm_flags & (VM_NORESERVE|VM_SHARED|VM_WRITE)) == VM_WRITE) {
+	/* prevent private mappings from being established */
+	if ((vma->vm_flags & VM_SHARED) != VM_SHARED) {
 		dev_info(dev, "%s: %s: fail, attempted private mapping\n",
 				current->comm, func);
 		return -EINVAL;
diff --git a/drivers/dax/pmem.c b/drivers/dax/pmem.c
index 4a15fa5df98b..73c6ce93a0d9 100644
--- a/drivers/dax/pmem.c
+++ b/drivers/dax/pmem.c
@@ -78,7 +78,9 @@ static int dax_pmem_probe(struct device *dev)
 	nsio = to_nd_namespace_io(&ndns->dev);
 
 	/* parse the 'pfn' info block via ->rw_bytes */
-	devm_nsio_enable(dev, nsio);
+	rc = devm_nsio_enable(dev, nsio);
+	if (rc)
+		return rc;
 	altmap = nvdimm_setup_pfn(nd_pfn, &res, &__altmap);
 	if (IS_ERR(altmap))
 		return PTR_ERR(altmap);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
index dae35a96a694..02ca5dd978f6 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
@@ -34,6 +34,7 @@ struct amdgpu_atpx {
 
 static struct amdgpu_atpx_priv {
 	bool atpx_detected;
+	bool bridge_pm_usable;
 	/* handle for device - and atpx */
 	acpi_handle dhandle;
 	acpi_handle other_handle;
@@ -205,7 +206,11 @@ static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx)
 	atpx->is_hybrid = false;
 	if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) {
 		printk("ATPX Hybrid Graphics\n");
-		atpx->functions.power_cntl = false;
+		/*
+		 * Disable legacy PM methods only when pcie port PM is usable,
+		 * otherwise the device might fail to power off or power on.
+		 */
+		atpx->functions.power_cntl = !amdgpu_atpx_priv.bridge_pm_usable;
 		atpx->is_hybrid = true;
 	}
 
@@ -480,6 +485,7 @@ static int amdgpu_atpx_power_state(enum vga_switcheroo_client_id id,
  */
 static bool amdgpu_atpx_pci_probe_handle(struct pci_dev *pdev)
 {
+	struct pci_dev *parent_pdev = pci_upstream_bridge(pdev);
 	acpi_handle dhandle, atpx_handle;
 	acpi_status status;
 
@@ -494,6 +500,7 @@ static bool amdgpu_atpx_pci_probe_handle(struct pci_dev *pdev)
 	}
 	amdgpu_atpx_priv.dhandle = dhandle;
 	amdgpu_atpx_priv.atpx.handle = atpx_handle;
+	amdgpu_atpx_priv.bridge_pm_usable = parent_pdev && parent_pdev->bridge_d3;
 	return true;
 }
 
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
index 13f2b705ea49..08cd0bd3ebe5 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
@@ -2984,19 +2984,19 @@ static int smu7_get_pp_table_entry_callback_func_v0(struct pp_hwmgr *hwmgr,
 	if (!(data->mc_micro_code_feature & DISABLE_MC_LOADMICROCODE) && memory_clock > data->highest_mclk)
 		data->highest_mclk = memory_clock;
 
-	performance_level = &(ps->performance_levels
-			[ps->performance_level_count++]);
-
 	PP_ASSERT_WITH_CODE(
 			(ps->performance_level_count < smum_get_mac_definition(hwmgr->smumgr, SMU_MAX_LEVELS_GRAPHICS)),
 			"Performance levels exceeds SMC limit!",
 			return -EINVAL);
 
 	PP_ASSERT_WITH_CODE(
-			(ps->performance_level_count <=
+			(ps->performance_level_count <
 					hwmgr->platform_descriptor.hardwareActivityPerformanceLevels),
-			"Performance levels exceeds Driver limit!",
-			return -EINVAL);
+			"Performance levels exceeds Driver limit, Skip!",
+			return 0);
+
+	performance_level = &(ps->performance_levels
+			[ps->performance_level_count++]);
 
 	/* Performance levels are arranged from low to high. */
 	performance_level->memory_clock = memory_clock;
diff --git a/drivers/gpu/drm/arm/hdlcd_crtc.c b/drivers/gpu/drm/arm/hdlcd_crtc.c
index 48019ae22ddb..28341b32067f 100644
--- a/drivers/gpu/drm/arm/hdlcd_crtc.c
+++ b/drivers/gpu/drm/arm/hdlcd_crtc.c
@@ -150,15 +150,14 @@ static void hdlcd_crtc_enable(struct drm_crtc *crtc)
 	clk_prepare_enable(hdlcd->clk);
 	hdlcd_crtc_mode_set_nofb(crtc);
 	hdlcd_write(hdlcd, HDLCD_REG_COMMAND, 1);
+	drm_crtc_vblank_on(crtc);
 }
 
 static void hdlcd_crtc_disable(struct drm_crtc *crtc)
 {
 	struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
 
-	if (!crtc->state->active)
-		return;
-
+	drm_crtc_vblank_off(crtc);
 	hdlcd_write(hdlcd, HDLCD_REG_COMMAND, 0);
 	clk_disable_unprepare(hdlcd->clk);
 }
diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index e8fb6ef947ee..38eaa63afb31 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -1907,6 +1907,8 @@ err_disable_pm_runtime:
 err_hdmiphy:
 	if (hdata->hdmiphy_port)
 		put_device(&hdata->hdmiphy_port->dev);
+	if (hdata->regs_hdmiphy)
+		iounmap(hdata->regs_hdmiphy);
 err_ddc:
 	put_device(&hdata->ddc_adpt->dev);
 
@@ -1929,6 +1931,9 @@ static int hdmi_remove(struct platform_device *pdev)
 	if (hdata->hdmiphy_port)
 		put_device(&hdata->hdmiphy_port->dev);
 
+	if (hdata->regs_hdmiphy)
+		iounmap(hdata->regs_hdmiphy);
+
 	put_device(&hdata->ddc_adpt->dev);
 
 	return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index f75c5b5a536c..c70310206ac5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -251,13 +251,6 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	ret = devm_request_irq(dev, irq, mtk_disp_ovl_irq_handler,
-			       IRQF_TRIGGER_NONE, dev_name(dev), priv);
-	if (ret < 0) {
-		dev_err(dev, "Failed to request irq %d: %d\n", irq, ret);
-		return ret;
-	}
-
 	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DISP_OVL);
 	if (comp_id < 0) {
 		dev_err(dev, "Failed to identify by alias: %d\n", comp_id);
@@ -273,6 +266,13 @@ static int mtk_disp_ovl_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	ret = devm_request_irq(dev, irq, mtk_disp_ovl_irq_handler,
+			       IRQF_TRIGGER_NONE, dev_name(dev), priv);
+	if (ret < 0) {
+		dev_err(dev, "Failed to request irq %d: %d\n", irq, ret);
+		return ret;
+	}
+
 	ret = component_add(dev, &mtk_disp_ovl_component_ops);
 	if (ret)
 		dev_err(dev, "Failed to add component: %d\n", ret);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index df33b3ca6ffd..48cc01fd20c7 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -123,7 +123,7 @@ static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w,
 			  unsigned int bpc)
 {
 	writel(w << 16 | h, comp->regs + DISP_OD_SIZE);
-	writel(OD_RELAYMODE, comp->regs + OD_RELAYMODE);
+	writel(OD_RELAYMODE, comp->regs + DISP_OD_CFG);
 	mtk_dither_set(comp, bpc, DISP_OD_CFG);
 }
 
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index 28b2044ed9f2..eaa5a2240c0c 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -86,7 +86,7 @@
 
 #define DSI_PHY_TIMECON0	0x110
 #define LPX				(0xff << 0)
-#define HS_PRPR				(0xff << 8)
+#define HS_PREP				(0xff << 8)
 #define HS_ZERO				(0xff << 16)
 #define HS_TRAIL			(0xff << 24)
 
@@ -102,10 +102,16 @@
 #define CLK_TRAIL			(0xff << 24)
 
 #define DSI_PHY_TIMECON3	0x11c
-#define CLK_HS_PRPR			(0xff << 0)
+#define CLK_HS_PREP			(0xff << 0)
 #define CLK_HS_POST			(0xff << 8)
 #define CLK_HS_EXIT			(0xff << 16)
 
+#define T_LPX		5
+#define T_HS_PREP	6
+#define T_HS_TRAIL	8
+#define T_HS_EXIT	7
+#define T_HS_ZERO	10
+
 #define NS_TO_CYCLE(n, c)    ((n) / (c) + (((n) % (c)) ? 1 : 0))
 
 struct phy;
@@ -161,20 +167,18 @@ static void mtk_dsi_mask(struct mtk_dsi *dsi, u32 offset, u32 mask, u32 data)
 static void dsi_phy_timconfig(struct mtk_dsi *dsi)
 {
 	u32 timcon0, timcon1, timcon2, timcon3;
-	unsigned int ui, cycle_time;
-	unsigned int lpx;
+	u32 ui, cycle_time;
 
 	ui = 1000 / dsi->data_rate + 0x01;
 	cycle_time = 8000 / dsi->data_rate + 0x01;
-	lpx = 5;
 
-	timcon0 = (8 << 24) | (0xa << 16) | (0x6 << 8) | lpx;
-	timcon1 = (7 << 24) | (5 * lpx << 16) | ((3 * lpx) / 2) << 8 |
-		  (4 * lpx);
+	timcon0 = T_LPX | T_HS_PREP << 8 | T_HS_ZERO << 16 | T_HS_TRAIL << 24;
+	timcon1 = 4 * T_LPX | (3 * T_LPX / 2) << 8 | 5 * T_LPX << 16 |
+		  T_HS_EXIT << 24;
 	timcon2 = ((NS_TO_CYCLE(0x64, cycle_time) + 0xa) << 24) |
 		  (NS_TO_CYCLE(0x150, cycle_time) << 16);
-	timcon3 = (2 * lpx) << 16 | NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8 |
-		   NS_TO_CYCLE(0x40, cycle_time);
+	timcon3 = NS_TO_CYCLE(0x40, cycle_time) | (2 * T_LPX) << 16 |
+		  NS_TO_CYCLE(80 + 52 * ui, cycle_time) << 8;
 
 	writel(timcon0, dsi->regs + DSI_PHY_TIMECON0);
 	writel(timcon1, dsi->regs + DSI_PHY_TIMECON1);
@@ -202,19 +206,47 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
 {
 	struct device *dev = dsi->dev;
 	int ret;
+	u64 pixel_clock, total_bits;
+	u32 htotal, htotal_bits, bit_per_pixel, overhead_cycles, overhead_bits;
 
 	if (++dsi->refcount != 1)
 		return 0;
 
+	switch (dsi->format) {
+	case MIPI_DSI_FMT_RGB565:
+		bit_per_pixel = 16;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		bit_per_pixel = 18;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+	case MIPI_DSI_FMT_RGB888:
+	default:
+		bit_per_pixel = 24;
+		break;
+	}
+
 	/**
-	 * data_rate = (pixel_clock / 1000) * pixel_dipth * mipi_ratio;
-	 * pixel_clock unit is Khz, data_rata unit is MHz, so need divide 1000.
-	 * mipi_ratio is mipi clk coefficient for balance the pixel clk in mipi.
-	 * we set mipi_ratio is 1.05.
+	 * vm.pixelclock is in kHz, pixel_clock unit is Hz, so multiply by 1000
+	 * htotal_time = htotal * byte_per_pixel / num_lanes
+	 * overhead_time = lpx + hs_prepare + hs_zero + hs_trail + hs_exit
+	 * mipi_ratio = (htotal_time + overhead_time) / htotal_time
+	 * data_rate = pixel_clock * bit_per_pixel * mipi_ratio / num_lanes;
 	 */
-	dsi->data_rate = dsi->vm.pixelclock * 3 * 21 / (1 * 1000 * 10);
+	pixel_clock = dsi->vm.pixelclock * 1000;
+	htotal = dsi->vm.hactive + dsi->vm.hback_porch + dsi->vm.hfront_porch +
+			dsi->vm.hsync_len;
+	htotal_bits = htotal * bit_per_pixel;
+
+	overhead_cycles = T_LPX + T_HS_PREP + T_HS_ZERO + T_HS_TRAIL +
+			T_HS_EXIT;
+	overhead_bits = overhead_cycles * dsi->lanes * 8;
+	total_bits = htotal_bits + overhead_bits;
+
+	dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits,
+					  htotal * dsi->lanes);
 
-	ret = clk_set_rate(dsi->hs_clk, dsi->data_rate * 1000000);
+	ret = clk_set_rate(dsi->hs_clk, dsi->data_rate);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set data rate: %d\n", ret);
 		goto err_refcount;
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index 2fdcd04bc93f..4129b12521a6 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -34,6 +34,7 @@ struct radeon_atpx {
 
 static struct radeon_atpx_priv {
 	bool atpx_detected;
+	bool bridge_pm_usable;
 	/* handle for device - and atpx */
 	acpi_handle dhandle;
 	struct radeon_atpx atpx;
@@ -203,7 +204,11 @@ static int radeon_atpx_validate(struct radeon_atpx *atpx)
 	atpx->is_hybrid = false;
 	if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) {
 		printk("ATPX Hybrid Graphics\n");
-		atpx->functions.power_cntl = false;
+		/*
+		 * Disable legacy PM methods only when pcie port PM is usable,
+		 * otherwise the device might fail to power off or power on.
+		 */
+		atpx->functions.power_cntl = !radeon_atpx_priv.bridge_pm_usable;
 		atpx->is_hybrid = true;
 	}
 
@@ -474,6 +479,7 @@ static int radeon_atpx_power_state(enum vga_switcheroo_client_id id,
  */
 static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev)
 {
+	struct pci_dev *parent_pdev = pci_upstream_bridge(pdev);
 	acpi_handle dhandle, atpx_handle;
 	acpi_status status;
 
@@ -487,6 +493,7 @@ static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev)
 
 	radeon_atpx_priv.dhandle = dhandle;
 	radeon_atpx_priv.atpx.handle = atpx_handle;
+	radeon_atpx_priv.bridge_pm_usable = parent_pdev && parent_pdev->bridge_d3;
 	return true;
 }
 
diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 086d8a507157..60d30203a5fa 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -32,6 +32,11 @@
 #include <linux/usb/ch9.h>
 #include "hid-ids.h"
 
+#define CP2112_REPORT_MAX_LENGTH		64
+#define CP2112_GPIO_CONFIG_LENGTH		5
+#define CP2112_GPIO_GET_LENGTH			2
+#define CP2112_GPIO_SET_LENGTH			3
+
 enum {
 	CP2112_GPIO_CONFIG		= 0x02,
 	CP2112_GPIO_GET			= 0x03,
@@ -161,6 +166,8 @@ struct cp2112_device {
 	atomic_t read_avail;
 	atomic_t xfer_avail;
 	struct gpio_chip gc;
+	u8 *in_out_buffer;
+	spinlock_t lock;
 };
 
 static int gpio_push_pull = 0xFF;
@@ -171,62 +178,86 @@ static int cp2112_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct cp2112_device *dev = gpiochip_get_data(chip);
 	struct hid_device *hdev = dev->hdev;
-	u8 buf[5];
+	u8 *buf = dev->in_out_buffer;
+	unsigned long flags;
 	int ret;
 
+	spin_lock_irqsave(&dev->lock, flags);
+
 	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
-				       sizeof(buf), HID_FEATURE_REPORT,
-				       HID_REQ_GET_REPORT);
-	if (ret != sizeof(buf)) {
+				 CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
+				 HID_REQ_GET_REPORT);
+	if (ret != CP2112_GPIO_CONFIG_LENGTH) {
 		hid_err(hdev, "error requesting GPIO config: %d\n", ret);
-		return ret;
+		goto exit;
 	}
 
 	buf[1] &= ~(1 << offset);
 	buf[2] = gpio_push_pull;
 
-	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
-				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
+				 CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
+				 HID_REQ_SET_REPORT);
 	if (ret < 0) {
 		hid_err(hdev, "error setting GPIO config: %d\n", ret);
-		return ret;
+		goto exit;
 	}
 
-	return 0;
+	ret = 0;
+
+exit:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret <= 0 ? ret : -EIO;
 }
 
 static void cp2112_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct cp2112_device *dev = gpiochip_get_data(chip);
 	struct hid_device *hdev = dev->hdev;
-	u8 buf[3];
+	u8 *buf = dev->in_out_buffer;
+	unsigned long flags;
 	int ret;
 
+	spin_lock_irqsave(&dev->lock, flags);
+
 	buf[0] = CP2112_GPIO_SET;
 	buf[1] = value ? 0xff : 0;
 	buf[2] = 1 << offset;
 
-	ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf, sizeof(buf),
-				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_SET, buf,
+				 CP2112_GPIO_SET_LENGTH, HID_FEATURE_REPORT,
+				 HID_REQ_SET_REPORT);
 	if (ret < 0)
 		hid_err(hdev, "error setting GPIO values: %d\n", ret);
+
+	spin_unlock_irqrestore(&dev->lock, flags);
 }
 
 static int cp2112_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct cp2112_device *dev = gpiochip_get_data(chip);
 	struct hid_device *hdev = dev->hdev;
-	u8 buf[2];
+	u8 *buf = dev->in_out_buffer;
+	unsigned long flags;
 	int ret;
 
-	ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf, sizeof(buf),
-				       HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
-	if (ret != sizeof(buf)) {
+	spin_lock_irqsave(&dev->lock, flags);
+
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_GET, buf,
+				 CP2112_GPIO_GET_LENGTH, HID_FEATURE_REPORT,
+				 HID_REQ_GET_REPORT);
+	if (ret != CP2112_GPIO_GET_LENGTH) {
 		hid_err(hdev, "error requesting GPIO values: %d\n", ret);
-		return ret;
+		ret = ret < 0 ? ret : -EIO;
+		goto exit;
 	}
 
-	return (buf[1] >> offset) & 1;
+	ret = (buf[1] >> offset) & 1;
+
+exit:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return ret;
 }
 
 static int cp2112_gpio_direction_output(struct gpio_chip *chip,
@@ -234,27 +265,33 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
 {
 	struct cp2112_device *dev = gpiochip_get_data(chip);
 	struct hid_device *hdev = dev->hdev;
-	u8 buf[5];
+	u8 *buf = dev->in_out_buffer;
+	unsigned long flags;
 	int ret;
 
+	spin_lock_irqsave(&dev->lock, flags);
+
 	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
-				       sizeof(buf), HID_FEATURE_REPORT,
-				       HID_REQ_GET_REPORT);
-	if (ret != sizeof(buf)) {
+				 CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
+				 HID_REQ_GET_REPORT);
+	if (ret != CP2112_GPIO_CONFIG_LENGTH) {
 		hid_err(hdev, "error requesting GPIO config: %d\n", ret);
-		return ret;
+		goto fail;
 	}
 
 	buf[1] |= 1 << offset;
 	buf[2] = gpio_push_pull;
 
-	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf, sizeof(buf),
-				 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	ret = hid_hw_raw_request(hdev, CP2112_GPIO_CONFIG, buf,
+				 CP2112_GPIO_CONFIG_LENGTH, HID_FEATURE_REPORT,
+				 HID_REQ_SET_REPORT);
 	if (ret < 0) {
 		hid_err(hdev, "error setting GPIO config: %d\n", ret);
-		return ret;
+		goto fail;
 	}
 
+	spin_unlock_irqrestore(&dev->lock, flags);
+
 	/*
 	 * Set gpio value when output direction is already set,
 	 * as specified in AN495, Rev. 0.2, cpt. 4.4
@@ -262,6 +299,10 @@ static int cp2112_gpio_direction_output(struct gpio_chip *chip,
 	cp2112_gpio_set(chip, offset, value);
 
 	return 0;
+
+fail:
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return ret < 0 ? ret : -EIO;
 }
 
 static int cp2112_hid_get(struct hid_device *hdev, unsigned char report_number,
@@ -1007,6 +1048,17 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	struct cp2112_smbus_config_report config;
 	int ret;
 
+	dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->in_out_buffer = devm_kzalloc(&hdev->dev, CP2112_REPORT_MAX_LENGTH,
+					  GFP_KERNEL);
+	if (!dev->in_out_buffer)
+		return -ENOMEM;
+
+	spin_lock_init(&dev->lock);
+
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "parse failed\n");
@@ -1063,12 +1115,6 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		goto err_power_normal;
 	}
 
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev) {
-		ret = -ENOMEM;
-		goto err_power_normal;
-	}
-
 	hid_set_drvdata(hdev, (void *)dev);
 	dev->hdev		= hdev;
 	dev->adap.owner		= THIS_MODULE;
@@ -1087,7 +1133,7 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	if (ret) {
 		hid_err(hdev, "error registering i2c adapter\n");
-		goto err_free_dev;
+		goto err_power_normal;
 	}
 
 	hid_dbg(hdev, "adapter registered\n");
@@ -1123,8 +1169,6 @@ err_gpiochip_remove:
 	gpiochip_remove(&dev->gc);
 err_free_i2c:
 	i2c_del_adapter(&dev->adap);
-err_free_dev:
-	kfree(dev);
 err_power_normal:
 	hid_hw_power(hdev, PM_HINT_NORMAL);
 err_hid_close:
@@ -1149,7 +1193,6 @@ static void cp2112_remove(struct hid_device *hdev)
 	 */
 	hid_hw_close(hdev);
 	hid_hw_stop(hdev);
-	kfree(dev);
 }
 
 static int cp2112_raw_event(struct hid_device *hdev, struct hid_report *report,
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 76f644deb0a7..c5c5fbe9d605 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -756,11 +756,16 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 
 	/* Setup wireless link with Logitech Wii wheel */
 	if (hdev->product == USB_DEVICE_ID_LOGITECH_WII_WHEEL) {
-		unsigned char buf[] = { 0x00, 0xAF,  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+		const unsigned char cbuf[] = { 0x00, 0xAF,  0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+		u8 *buf = kmemdup(cbuf, sizeof(cbuf), GFP_KERNEL);
 
-		ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
-					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+		if (!buf) {
+			ret = -ENOMEM;
+			goto err_free;
+		}
 
+		ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(cbuf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 		if (ret >= 0) {
 			/* insert a little delay of 10 jiffies ~ 40ms */
 			wait_queue_head_t wait;
@@ -772,9 +777,10 @@ static int lg_probe(struct hid_device *hdev, const struct hid_device_id *id)
 			buf[1] = 0xB2;
 			get_random_bytes(&buf[2], 2);
 
-			ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(buf),
+			ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(cbuf),
 					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
 		}
+		kfree(buf);
 	}
 
 	if (drv_data->quirks & LG_FF)
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index d6fa496d0ca2..20b40ad26325 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -493,7 +493,8 @@ static int magicmouse_input_configured(struct hid_device *hdev,
 static int magicmouse_probe(struct hid_device *hdev,
 	const struct hid_device_id *id)
 {
-	__u8 feature[] = { 0xd7, 0x01 };
+	const u8 feature[] = { 0xd7, 0x01 };
+	u8 *buf;
 	struct magicmouse_sc *msc;
 	struct hid_report *report;
 	int ret;
@@ -544,6 +545,12 @@ static int magicmouse_probe(struct hid_device *hdev,
 	}
 	report->size = 6;
 
+	buf = kmemdup(feature, sizeof(feature), GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto err_stop_hw;
+	}
+
 	/*
 	 * Some devices repond with 'invalid report id' when feature
 	 * report switching it into multitouch mode is sent to it.
@@ -552,8 +559,9 @@ static int magicmouse_probe(struct hid_device *hdev,
 	 * but there seems to be no other way of switching the mode.
 	 * Thus the super-ugly hacky success check below.
 	 */
-	ret = hid_hw_raw_request(hdev, feature[0], feature, sizeof(feature),
+	ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(feature),
 				HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	kfree(buf);
 	if (ret != -EIO && ret != sizeof(feature)) {
 		hid_err(hdev, "unable to request touch data (%d)\n", ret);
 		goto err_stop_hw;
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 9cd2ca34a6be..be89bcbf6a71 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -188,10 +188,16 @@ static int rmi_set_page(struct hid_device *hdev, u8 page)
 static int rmi_set_mode(struct hid_device *hdev, u8 mode)
 {
 	int ret;
-	u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode};
+	const u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode};
+	u8 *buf;
 
-	ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, txbuf,
+	buf = kmemdup(txbuf, sizeof(txbuf), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, buf,
 			sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	kfree(buf);
 	if (ret < 0) {
 		dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode,
 			ret);
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index c5c3d6111729..60875625cbdf 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -212,6 +212,7 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
 	__s32 value;
 	int ret = 0;
 
+	memset(buffer, 0, buffer_size);
 	mutex_lock(&data->mutex);
 	report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT);
 	if (!report || (field_index >= report->maxfield)) {
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 11e866d05368..b403fa5ecf49 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -91,9 +91,7 @@
 					 DW_IC_INTR_TX_ABRT | \
 					 DW_IC_INTR_STOP_DET)
 
-#define DW_IC_STATUS_ACTIVITY		0x1
-#define DW_IC_STATUS_TFE		BIT(2)
-#define DW_IC_STATUS_MST_ACTIVITY	BIT(5)
+#define DW_IC_STATUS_ACTIVITY	0x1
 
 #define DW_IC_SDA_HOLD_RX_SHIFT		16
 #define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
@@ -478,25 +476,9 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 {
 	struct i2c_msg *msgs = dev->msgs;
 	u32 ic_tar = 0;
-	bool enabled;
 
-	enabled = dw_readl(dev, DW_IC_ENABLE_STATUS) & 1;
-
-	if (enabled) {
-		u32 ic_status;
-
-		/*
-		 * Only disable adapter if ic_tar and ic_con can't be
-		 * dynamically updated
-		 */
-		ic_status = dw_readl(dev, DW_IC_STATUS);
-		if (!dev->dynamic_tar_update_enabled ||
-		    (ic_status & DW_IC_STATUS_MST_ACTIVITY) ||
-		    !(ic_status & DW_IC_STATUS_TFE)) {
-			__i2c_dw_enable_and_wait(dev, false);
-			enabled = false;
-		}
-	}
+	/* Disable the adapter */
+	__i2c_dw_enable_and_wait(dev, false);
 
 	/* if the slave address is ten bit address, enable 10BITADDR */
 	if (dev->dynamic_tar_update_enabled) {
@@ -526,8 +508,8 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	/* enforce disabled interrupts (due to HW issues) */
 	i2c_dw_disable_int(dev);
 
-	if (!enabled)
-		__i2c_dw_enable(dev, true);
+	/* Enable the adapter */
+	__i2c_dw_enable(dev, true);
 
 	/* Clear and enable interrupts */
 	dw_readl(dev, DW_IC_CLR_INTR);
@@ -611,7 +593,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
 
 				/* avoid rx buffer overrun */
-				if (rx_limit - dev->rx_outstanding <= 0)
+				if (dev->rx_outstanding >= dev->rx_fifo_depth)
 					break;
 
 				dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
@@ -708,8 +690,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 }
 
 /*
- * Prepare controller for a transaction and start transfer by calling
- * i2c_dw_xfer_init()
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg
  */
 static int
 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -752,13 +733,23 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		goto done;
 	}
 
+	/*
+	 * We must disable the adapter before returning and signaling the end
+	 * of the current transfer. Otherwise the hardware might continue
+	 * generating interrupts which in turn causes a race condition with
+	 * the following transfer.  Needs some more investigation if the
+	 * additional interrupts are a hardware bug or this driver doesn't
+	 * handle them correctly yet.
+	 */
+	__i2c_dw_enable(dev, false);
+
 	if (dev->msg_err) {
 		ret = dev->msg_err;
 		goto done;
 	}
 
 	/* no error */
-	if (likely(!dev->cmd_err)) {
+	if (likely(!dev->cmd_err && !dev->status)) {
 		ret = num;
 		goto done;
 	}
@@ -768,6 +759,11 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		ret = i2c_dw_handle_tx_abort(dev);
 		goto done;
 	}
+
+	if (dev->status)
+		dev_err(dev->dev,
+			"transfer terminated early - interrupt latency too high?\n");
+
 	ret = -EIO;
 
 done:
@@ -888,19 +884,9 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 	 */
 
 tx_aborted:
-	if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
-			|| dev->msg_err) {
-		/*
-		 * We must disable interruts before returning and signaling
-		 * the end of the current transfer. Otherwise the hardware
-		 * might continue generating interrupts for non-existent
-		 * transfers.
-		 */
-		i2c_dw_disable_int(dev);
-		dw_readl(dev, DW_IC_CLR_INTR);
-
+	if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
 		complete(&dev->cmd_complete);
-	} else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
+	else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
 		/* workaround to trigger pending interrupt */
 		stat = dw_readl(dev, DW_IC_INTR_MASK);
 		i2c_dw_disable_int(dev);
diff --git a/drivers/media/tuners/tuner-xc2028.c b/drivers/media/tuners/tuner-xc2028.c
index 317ef63ee789..8d96a22647b3 100644
--- a/drivers/media/tuners/tuner-xc2028.c
+++ b/drivers/media/tuners/tuner-xc2028.c
@@ -281,6 +281,14 @@ static void free_firmware(struct xc2028_data *priv)
 	int i;
 	tuner_dbg("%s called\n", __func__);
 
+	/* free allocated f/w string */
+	if (priv->fname != firmware_name)
+		kfree(priv->fname);
+	priv->fname = NULL;
+
+	priv->state = XC2028_NO_FIRMWARE;
+	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
+
 	if (!priv->firm)
 		return;
 
@@ -291,9 +299,6 @@ static void free_firmware(struct xc2028_data *priv)
 
 	priv->firm = NULL;
 	priv->firm_size = 0;
-	priv->state = XC2028_NO_FIRMWARE;
-
-	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 }
 
 static int load_all_firmwares(struct dvb_frontend *fe,
@@ -884,9 +889,8 @@ read_not_reliable:
 	return 0;
 
 fail:
-	priv->state = XC2028_NO_FIRMWARE;
+	free_firmware(priv);
 
-	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 	if (retry_count < 8) {
 		msleep(50);
 		retry_count++;
@@ -1332,11 +1336,8 @@ static int xc2028_dvb_release(struct dvb_frontend *fe)
 	mutex_lock(&xc2028_list_mutex);
 
 	/* only perform final cleanup if this is the last instance */
-	if (hybrid_tuner_report_instance_count(priv) == 1) {
+	if (hybrid_tuner_report_instance_count(priv) == 1)
 		free_firmware(priv);
-		kfree(priv->ctrl.fname);
-		priv->ctrl.fname = NULL;
-	}
 
 	if (priv)
 		hybrid_tuner_release_state(priv);
@@ -1399,19 +1400,8 @@ static int xc2028_set_config(struct dvb_frontend *fe, void *priv_cfg)
 
 	/*
 	 * Copy the config data.
-	 * For the firmware name, keep a local copy of the string,
-	 * in order to avoid troubles during device release.
 	 */
-	kfree(priv->ctrl.fname);
-	priv->ctrl.fname = NULL;
 	memcpy(&priv->ctrl, p, sizeof(priv->ctrl));
-	if (p->fname) {
-		priv->ctrl.fname = kstrdup(p->fname, GFP_KERNEL);
-		if (priv->ctrl.fname == NULL) {
-			rc = -ENOMEM;
-			goto unlock;
-		}
-	}
 
 	/*
 	 * If firmware name changed, frees firmware. As free_firmware will
@@ -1426,10 +1416,15 @@ static int xc2028_set_config(struct dvb_frontend *fe, void *priv_cfg)
 
 	if (priv->state == XC2028_NO_FIRMWARE) {
 		if (!firmware_name[0])
-			priv->fname = priv->ctrl.fname;
+			priv->fname = kstrdup(p->fname, GFP_KERNEL);
 		else
 			priv->fname = firmware_name;
 
+		if (!priv->fname) {
+			rc = -ENOMEM;
+			goto unlock;
+		}
+
 		rc = request_firmware_nowait(THIS_MODULE, 1,
 					     priv->fname,
 					     priv->i2c_props.adap->dev.parent,
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 2f2225e845ef..b93fe4c4957a 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -73,8 +73,10 @@ static struct syscon *of_syscon_register(struct device_node *np)
 	/* Parse the device's DT node for an endianness specification */
 	if (of_property_read_bool(np, "big-endian"))
 		syscon_config.val_format_endian = REGMAP_ENDIAN_BIG;
-	 else if (of_property_read_bool(np, "little-endian"))
+	else if (of_property_read_bool(np, "little-endian"))
 		syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
+	else if (of_property_read_bool(np, "native-endian"))
+		syscon_config.val_format_endian = REGMAP_ENDIAN_NATIVE;
 
 	/*
 	 * search for reg-io-width property in DT. If it is not provided,
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 7eec619a6023..8588dbad3301 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -393,8 +393,13 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		BUG();
 		goto err;
 	}
-		
-	ret = devm_regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
+
+	/*
+	 * Can't use devres helper here as some of the supplies are provided by
+	 * wm8994->dev's children (regulators) and those regulators are
+	 * unregistered by the devres core before the supplies are freed.
+	 */
+	ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
 				 wm8994->supplies);
 	if (ret != 0) {
 		dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
@@ -405,7 +410,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 				    wm8994->supplies);
 	if (ret != 0) {
 		dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
-		goto err;
+		goto err_regulator_free;
 	}
 
 	ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
@@ -596,6 +601,8 @@ err_irq:
 err_enable:
 	regulator_bulk_disable(wm8994->num_supplies,
 			       wm8994->supplies);
+err_regulator_free:
+	regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
 err:
 	mfd_remove_devices(wm8994->dev);
 	return ret;
@@ -604,10 +611,11 @@ err:
 static void wm8994_device_exit(struct wm8994 *wm8994)
 {
 	pm_runtime_disable(wm8994->dev);
-	mfd_remove_devices(wm8994->dev);
 	wm8994_irq_exit(wm8994);
 	regulator_bulk_disable(wm8994->num_supplies,
 			       wm8994->supplies);
+	regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
+	mfd_remove_devices(wm8994->dev);
 }
 
 static const struct of_device_id wm8994_of_match[] = {
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 50a674be6655..df478ae72e23 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1058,6 +1058,7 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
 	spin_unlock_irqrestore(&host->irq_lock, irqflags);
 
 	if (host->dma_ops->start(host, sg_len)) {
+		host->dma_ops->stop(host);
 		/* We can't do DMA, try PIO for this one */
 		dev_dbg(host->dev,
 			"%s: fall back to PIO mode for current transfer\n",
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index fb71c866eacc..1bb11e4a9fe5 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -66,6 +66,20 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
 			return ret;
 		}
 	}
+	/*
+	 * The DAT[3:0] line signal levels and the CMD line signal level are
+	 * not compatible with standard SDHC register. The line signal levels
+	 * DAT[7:0] are at bits 31:24 and the command line signal level is at
+	 * bit 23. All other bits are the same as in the standard SDHC
+	 * register.
+	 */
+	if (spec_reg == SDHCI_PRESENT_STATE) {
+		ret = value & 0x000fffff;
+		ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
+		ret |= (value << 1) & SDHCI_CMD_LVL;
+		return ret;
+	}
+
 	ret = value;
 	return ret;
 }
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 766df17fb7eb..2570455b219a 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -73,6 +73,7 @@
 #define  SDHCI_DATA_LVL_MASK	0x00F00000
 #define   SDHCI_DATA_LVL_SHIFT	20
 #define   SDHCI_DATA_0_LVL_MASK	0x00100000
+#define  SDHCI_CMD_LVL		0x01000000
 
 #define SDHCI_HOST_CONTROL	0x28
 #define  SDHCI_CTRL_LED		0x01
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 8c7bdbe66313..0e4f168bea9e 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1812,6 +1812,9 @@ static int bnxt_busy_poll(struct napi_struct *napi)
 	if (atomic_read(&bp->intr_sem) != 0)
 		return LL_FLUSH_FAILED;
 
+	if (!bp->link_info.link_up)
+		return LL_FLUSH_FAILED;
+
 	if (!bnxt_lock_poll(bnapi))
 		return LL_FLUSH_BUSY;
 
@@ -3211,11 +3214,17 @@ static int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, __be16 port,
 		goto err_out;
 	}
 
-	if (tunnel_type & TUNNEL_DST_PORT_ALLOC_REQ_TUNNEL_TYPE_VXLAN)
+	switch (tunnel_type) {
+	case TUNNEL_DST_PORT_ALLOC_REQ_TUNNEL_TYPE_VXLAN:
 		bp->vxlan_fw_dst_port_id = resp->tunnel_dst_port_id;
-
-	else if (tunnel_type & TUNNEL_DST_PORT_ALLOC_REQ_TUNNEL_TYPE_GENEVE)
+		break;
+	case TUNNEL_DST_PORT_ALLOC_REQ_TUNNEL_TYPE_GENEVE:
 		bp->nge_fw_dst_port_id = resp->tunnel_dst_port_id;
+		break;
+	default:
+		break;
+	}
+
 err_out:
 	mutex_unlock(&bp->hwrm_cmd_lock);
 	return rc;
diff --git a/drivers/net/ethernet/freescale/fman/fman_tgec.c b/drivers/net/ethernet/freescale/fman/fman_tgec.c
index efabb04a1ae8..4b0f3a50b293 100644
--- a/drivers/net/ethernet/freescale/fman/fman_tgec.c
+++ b/drivers/net/ethernet/freescale/fman/fman_tgec.c
@@ -722,9 +722,6 @@ int tgec_free(struct fman_mac *tgec)
 {
 	free_init_resources(tgec);
 
-	if (tgec->cfg)
-		tgec->cfg = NULL;
-
 	kfree(tgec->cfg);
 	kfree(tgec);
 
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 1e486d1312e9..c12596676bbb 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -74,7 +74,6 @@
 #include <asm/iommu.h>
 #include <linux/uaccess.h>
 #include <asm/firmware.h>
-#include <linux/seq_file.h>
 #include <linux/workqueue.h>
 
 #include "ibmvnic.h"
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 87274d4ab102..0a24571e44b9 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4131,7 +4131,7 @@ static int mvneta_probe(struct platform_device *pdev)
 	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
 	dev->hw_features |= dev->features;
 	dev->vlan_features |= dev->features;
-	dev->priv_flags |= IFF_UNICAST_FLT | IFF_LIVE_ADDR_CHANGE;
+	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
 	dev->gso_max_segs = MVNETA_MAX_TSO_SEGS;
 
 	/* MTU range: 68 - 9676 */
diff --git a/drivers/net/ethernet/marvell/mvpp2.c b/drivers/net/ethernet/marvell/mvpp2.c
index ee857868bea5..dabc5418efcc 100644
--- a/drivers/net/ethernet/marvell/mvpp2.c
+++ b/drivers/net/ethernet/marvell/mvpp2.c
@@ -3293,7 +3293,7 @@ static void mvpp2_cls_init(struct mvpp2 *priv)
 	mvpp2_write(priv, MVPP2_CLS_MODE_REG, MVPP2_CLS_MODE_ACTIVE_MASK);
 
 	/* Clear classifier flow table */
-	memset(&fe.data, 0, MVPP2_CLS_FLOWS_TBL_DATA_WORDS);
+	memset(&fe.data, 0, sizeof(fe.data));
 	for (index = 0; index < MVPP2_CLS_FLOWS_TBL_SIZE; index++) {
 		fe.index = index;
 		mvpp2_cls_flow_write(priv, &fe);
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 9018bb1b2e12..c48ce3f366c3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -129,6 +129,9 @@ static enum mlx4_net_trans_rule_id mlx4_ip_proto_to_trans_rule_id(u8 ip_proto)
 	}
 };
 
+/* Must not acquire state_lock, as its corresponding work_sync
+ * is done under it.
+ */
 static void mlx4_en_filter_work(struct work_struct *work)
 {
 	struct mlx4_en_filter *filter = container_of(work,
@@ -2239,13 +2242,13 @@ void mlx4_en_destroy_netdev(struct net_device *dev)
 	mutex_lock(&mdev->state_lock);
 	mdev->pndev[priv->port] = NULL;
 	mdev->upper[priv->port] = NULL;
-	mutex_unlock(&mdev->state_lock);
 
 #ifdef CONFIG_RFS_ACCEL
 	mlx4_en_cleanup_filters(priv);
 #endif
 
 	mlx4_en_free_resources(priv);
+	mutex_unlock(&mdev->state_lock);
 
 	for (t = 0; t < MLX4_EN_NUM_TX_TYPES; t++) {
 		kfree(priv->tx_ring[t]);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index b440a16101d2..2dc28695196c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -46,7 +46,6 @@
 #include <linux/mlx5/srq.h>
 #include <linux/debugfs.h>
 #include <linux/kmod.h>
-#include <linux/delay.h>
 #include <linux/mlx5/mlx5_ifc.h>
 #ifdef CONFIG_RFS_ACCEL
 #include <linux/cpu_rmap.h>
diff --git a/drivers/net/ethernet/synopsys/dwc_eth_qos.c b/drivers/net/ethernet/synopsys/dwc_eth_qos.c
index 70533017aaa7..acce385f69d4 100644
--- a/drivers/net/ethernet/synopsys/dwc_eth_qos.c
+++ b/drivers/net/ethernet/synopsys/dwc_eth_qos.c
@@ -33,7 +33,6 @@
 #include <linux/stat.h>
 #include <linux/types.h>
 
-#include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/mm.h>
@@ -43,7 +42,6 @@
 
 #include <linux/phy.h>
 #include <linux/mii.h>
-#include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
 
diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c
index 4ff4c7d4b5e0..3e4c8b21403c 100644
--- a/drivers/net/ieee802154/adf7242.c
+++ b/drivers/net/ieee802154/adf7242.c
@@ -20,7 +20,6 @@
 #include <linux/skbuff.h>
 #include <linux/of.h>
 #include <linux/irq.h>
-#include <linux/delay.h>
 #include <linux/debugfs.h>
 #include <linux/bitops.h>
 #include <linux/ieee802154.h>
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 7ddfd2c917ea..3c0a1714977b 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -622,7 +622,8 @@ hash_add:
 	return 0;
 
 clear_multi:
-	dev_set_allmulti(lowerdev, -1);
+	if (dev->flags & IFF_ALLMULTI)
+		dev_set_allmulti(lowerdev, -1);
 del_unicast:
 	dev_uc_del(lowerdev, dev->dev_addr);
 out:
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 081df68d2ce1..ea92d524d5a8 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -318,12 +318,12 @@ static int ksz8041_config_init(struct phy_device *phydev)
 	/* Limit supported and advertised modes in fiber mode */
 	if (of_property_read_bool(of_node, "micrel,fiber-mode")) {
 		phydev->dev_flags |= MICREL_PHY_FXEN;
-		phydev->supported &= SUPPORTED_FIBRE |
-				     SUPPORTED_100baseT_Full |
+		phydev->supported &= SUPPORTED_100baseT_Full |
 				     SUPPORTED_100baseT_Half;
-		phydev->advertising &= ADVERTISED_FIBRE |
-				       ADVERTISED_100baseT_Full |
+		phydev->supported |= SUPPORTED_FIBRE;
+		phydev->advertising &= ADVERTISED_100baseT_Full |
 				       ADVERTISED_100baseT_Half;
+		phydev->advertising |= ADVERTISED_FIBRE;
 		phydev->autoneg = AUTONEG_DISABLE;
 	}
 
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 87e6334eab93..547ca7b3f098 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -459,8 +459,6 @@ static int twl4030_phy_power_off(struct phy *phy)
 	struct twl4030_usb *twl = phy_get_drvdata(phy);
 
 	dev_dbg(twl->dev, "%s\n", __func__);
-	pm_runtime_mark_last_busy(twl->dev);
-	pm_runtime_put_autosuspend(twl->dev);
 
 	return 0;
 }
@@ -472,6 +470,8 @@ static int twl4030_phy_power_on(struct phy *phy)
 	dev_dbg(twl->dev, "%s\n", __func__);
 	pm_runtime_get_sync(twl->dev);
 	schedule_delayed_work(&twl->id_workaround_work, HZ);
+	pm_runtime_mark_last_busy(twl->dev);
+	pm_runtime_put_autosuspend(twl->dev);
 
 	return 0;
 }
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 8aa769a2d919..91b70bc46e7f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4010,7 +4010,10 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
 	    SAM_STAT_CHECK_CONDITION;
 }
 
-
+static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd)
+{
+	return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16);
+}
 
 /**
  * scsih_qcmd - main scsi request entry point
@@ -4038,6 +4041,13 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 	if (ioc->logging_level & MPT_DEBUG_SCSI)
 		scsi_print_command(scmd);
 
+	/*
+	 * Lock the device for any subsequent command until command is
+	 * done.
+	 */
+	if (ata_12_16_cmd(scmd))
+		scsi_internal_device_block(scmd->device);
+
 	sas_device_priv_data = scmd->device->hostdata;
 	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
 		scmd->result = DID_NO_CONNECT << 16;
@@ -4613,6 +4623,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 	if (scmd == NULL)
 		return 1;
 
+	if (ata_12_16_cmd(scmd))
+		scsi_internal_device_unblock(scmd->device, SDEV_RUNNING);
+
 	mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
 
 	if (mpi_reply == NULL) {
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 567fa080e261..56d6142852a5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1456,15 +1456,20 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res)
 		for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) {
 			sp = req->outstanding_cmds[cnt];
 			if (sp) {
-				/* Get a reference to the sp and drop the lock.
-				 * The reference ensures this sp->done() call
-				 * - and not the call in qla2xxx_eh_abort() -
-				 * ends the SCSI command (with result 'res').
+				/* Don't abort commands in adapter during EEH
+				 * recovery as it's not accessible/responding.
 				 */
-				sp_get(sp);
-				spin_unlock_irqrestore(&ha->hardware_lock, flags);
-				qla2xxx_eh_abort(GET_CMD_SP(sp));
-				spin_lock_irqsave(&ha->hardware_lock, flags);
+				if (!ha->flags.eeh_busy) {
+					/* Get a reference to the sp and drop the lock.
+					 * The reference ensures this sp->done() call
+					 * - and not the call in qla2xxx_eh_abort() -
+					 * ends the SCSI command (with result 'res').
+					 */
+					sp_get(sp);
+					spin_unlock_irqrestore(&ha->hardware_lock, flags);
+					qla2xxx_eh_abort(GET_CMD_SP(sp));
+					spin_lock_irqsave(&ha->hardware_lock, flags);
+				}
 				req->outstanding_cmds[cnt] = NULL;
 				sp->done(vha, sp, res);
 			}
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index 7a223074df3d..afada655f861 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -669,9 +669,16 @@ static struct thermal_cooling_device_ops powerclamp_cooling_ops = {
 	.set_cur_state = powerclamp_set_cur_state,
 };
 
+static const struct x86_cpu_id __initconst intel_powerclamp_ids[] = {
+	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_MWAIT },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
+
 static int __init powerclamp_probe(void)
 {
-	if (!boot_cpu_has(X86_FEATURE_MWAIT)) {
+
+	if (!x86_match_cpu(intel_powerclamp_ids)) {
 		pr_err("CPU does not support MWAIT");
 		return -ENODEV;
 	}
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 69426e644d17..3dbb4a21ab44 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -914,6 +914,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (!ci)
 		return -ENOMEM;
 
+	spin_lock_init(&ci->lock);
 	ci->dev = dev;
 	ci->platdata = dev_get_platdata(dev);
 	ci->imx28_write_fix = !!(ci->platdata->flags &
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 661f43fe0f9e..c9e80ad48fdc 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1889,8 +1889,6 @@ static int udc_start(struct ci_hdrc *ci)
 	struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
 	int retval = 0;
 
-	spin_lock_init(&ci->lock);
-
 	ci->gadget.ops          = &usb_gadget_ops;
 	ci->gadget.speed        = USB_SPEED_UNKNOWN;
 	ci->gadget.max_speed    = USB_SPEED_HIGH;
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index e40d47d47d82..17989b72cdae 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -3225,11 +3225,11 @@ static bool ffs_func_req_match(struct usb_function *f,
 
 	switch (creq->bRequestType & USB_RECIP_MASK) {
 	case USB_RECIP_INTERFACE:
-		return ffs_func_revmap_intf(func,
-					    le16_to_cpu(creq->wIndex) >= 0);
+		return (ffs_func_revmap_intf(func,
+					     le16_to_cpu(creq->wIndex)) >= 0);
 	case USB_RECIP_ENDPOINT:
-		return ffs_func_revmap_ep(func,
-					  le16_to_cpu(creq->wIndex) >= 0);
+		return (ffs_func_revmap_ep(func,
+					   le16_to_cpu(creq->wIndex)) >= 0);
 	default:
 		return (bool) (func->ffs->user_flags &
 			       FUNCTIONFS_ALL_CTRL_RECIP);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e01116e4c067..c3e172e15ec3 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -986,7 +986,7 @@ b_host:
 	}
 #endif
 
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	return handled;
 }
@@ -1855,14 +1855,23 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 		MUSB_DEVCTL_HR;
 	switch (devctl & ~s) {
 	case MUSB_QUIRK_B_INVALID_VBUS_91:
-		if (!musb->session && !musb->quirk_invalid_vbus) {
-			musb->quirk_invalid_vbus = true;
+		if (musb->quirk_retries--) {
 			musb_dbg(musb,
-				 "First invalid vbus, assume no session");
+				 "Poll devctl on invalid vbus, assume no session");
+			schedule_delayed_work(&musb->irq_work,
+					      msecs_to_jiffies(1000));
+
 			return;
 		}
-		break;
 	case MUSB_QUIRK_A_DISCONNECT_19:
+		if (musb->quirk_retries--) {
+			musb_dbg(musb,
+				 "Poll devctl on possible host mode disconnect");
+			schedule_delayed_work(&musb->irq_work,
+					      msecs_to_jiffies(1000));
+
+			return;
+		}
 		if (!musb->session)
 			break;
 		musb_dbg(musb, "Allow PM on possible host mode disconnect");
@@ -1886,9 +1895,9 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 		if (error < 0)
 			dev_err(musb->controller, "Could not enable: %i\n",
 				error);
+		musb->quirk_retries = 3;
 	} else {
 		musb_dbg(musb, "Allow PM with no session: %02x", devctl);
-		musb->quirk_invalid_vbus = false;
 		pm_runtime_mark_last_busy(musb->controller);
 		pm_runtime_put_autosuspend(musb->controller);
 	}
@@ -1899,7 +1908,7 @@ static void musb_pm_runtime_check_session(struct musb *musb)
 /* Only used to provide driver mode change events */
 static void musb_irq_work(struct work_struct *data)
 {
-	struct musb *musb = container_of(data, struct musb, irq_work);
+	struct musb *musb = container_of(data, struct musb, irq_work.work);
 
 	musb_pm_runtime_check_session(musb);
 
@@ -1969,6 +1978,7 @@ static struct musb *allocate_instance(struct device *dev,
 	INIT_LIST_HEAD(&musb->control);
 	INIT_LIST_HEAD(&musb->in_bulk);
 	INIT_LIST_HEAD(&musb->out_bulk);
+	INIT_LIST_HEAD(&musb->pending_list);
 
 	musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
 	musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON;
@@ -2018,6 +2028,84 @@ static void musb_free(struct musb *musb)
 	musb_host_free(musb);
 }
 
+struct musb_pending_work {
+	int (*callback)(struct musb *musb, void *data);
+	void *data;
+	struct list_head node;
+};
+
+/*
+ * Called from musb_runtime_resume(), musb_resume(), and
+ * musb_queue_resume_work(). Callers must take musb->lock.
+ */
+static int musb_run_resume_work(struct musb *musb)
+{
+	struct musb_pending_work *w, *_w;
+	unsigned long flags;
+	int error = 0;
+
+	spin_lock_irqsave(&musb->list_lock, flags);
+	list_for_each_entry_safe(w, _w, &musb->pending_list, node) {
+		if (w->callback) {
+			error = w->callback(musb, w->data);
+			if (error < 0) {
+				dev_err(musb->controller,
+					"resume callback %p failed: %i\n",
+					w->callback, error);
+			}
+		}
+		list_del(&w->node);
+		devm_kfree(musb->controller, w);
+	}
+	spin_unlock_irqrestore(&musb->list_lock, flags);
+
+	return error;
+}
+
+/*
+ * Called to run work if device is active or else queue the work to happen
+ * on resume. Caller must take musb->lock and must hold an RPM reference.
+ *
+ * Note that we cowardly refuse queuing work after musb PM runtime
+ * resume is done calling musb_run_resume_work() and return -EINPROGRESS
+ * instead.
+ */
+int musb_queue_resume_work(struct musb *musb,
+			   int (*callback)(struct musb *musb, void *data),
+			   void *data)
+{
+	struct musb_pending_work *w;
+	unsigned long flags;
+	int error;
+
+	if (WARN_ON(!callback))
+		return -EINVAL;
+
+	if (pm_runtime_active(musb->controller))
+		return callback(musb, data);
+
+	w = devm_kzalloc(musb->controller, sizeof(*w), GFP_ATOMIC);
+	if (!w)
+		return -ENOMEM;
+
+	w->callback = callback;
+	w->data = data;
+	spin_lock_irqsave(&musb->list_lock, flags);
+	if (musb->is_runtime_suspended) {
+		list_add_tail(&w->node, &musb->pending_list);
+		error = 0;
+	} else {
+		dev_err(musb->controller, "could not add resume work %p\n",
+			callback);
+		devm_kfree(musb->controller, w);
+		error = -EINPROGRESS;
+	}
+	spin_unlock_irqrestore(&musb->list_lock, flags);
+
+	return error;
+}
+EXPORT_SYMBOL_GPL(musb_queue_resume_work);
+
 static void musb_deassert_reset(struct work_struct *work)
 {
 	struct musb *musb;
@@ -2065,6 +2153,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	}
 
 	spin_lock_init(&musb->lock);
+	spin_lock_init(&musb->list_lock);
 	musb->board_set_power = plat->set_power;
 	musb->min_power = plat->min_power;
 	musb->ops = plat->platform_ops;
@@ -2208,7 +2297,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	musb_generic_disable(musb);
 
 	/* Init IRQ workqueue before request_irq */
-	INIT_WORK(&musb->irq_work, musb_irq_work);
+	INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
 	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
 	INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
 
@@ -2291,6 +2380,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	if (status)
 		goto fail5;
 
+	musb->is_initialized = 1;
 	pm_runtime_mark_last_busy(musb->controller);
 	pm_runtime_put_autosuspend(musb->controller);
 
@@ -2304,7 +2394,7 @@ fail4:
 	musb_host_cleanup(musb);
 
 fail3:
-	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->irq_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	if (musb->dma_controller)
@@ -2371,7 +2461,7 @@ static int musb_remove(struct platform_device *pdev)
 	 */
 	musb_exit_debugfs(musb);
 
-	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->irq_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	pm_runtime_get_sync(musb->controller);
@@ -2557,6 +2647,7 @@ static int musb_suspend(struct device *dev)
 
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
+	WARN_ON(!list_empty(&musb->pending_list));
 
 	spin_lock_irqsave(&musb->lock, flags);
 
@@ -2578,9 +2669,11 @@ static int musb_suspend(struct device *dev)
 
 static int musb_resume(struct device *dev)
 {
-	struct musb	*musb = dev_to_musb(dev);
-	u8		devctl;
-	u8		mask;
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int error;
+	u8 devctl;
+	u8 mask;
 
 	/*
 	 * For static cmos like DaVinci, register values were preserved
@@ -2614,6 +2707,13 @@ static int musb_resume(struct device *dev)
 
 	musb_start(musb);
 
+	spin_lock_irqsave(&musb->lock, flags);
+	error = musb_run_resume_work(musb);
+	if (error)
+		dev_err(musb->controller, "resume work failed with %i\n",
+			error);
+	spin_unlock_irqrestore(&musb->lock, flags);
+
 	return 0;
 }
 
@@ -2622,14 +2722,16 @@ static int musb_runtime_suspend(struct device *dev)
 	struct musb	*musb = dev_to_musb(dev);
 
 	musb_save_context(musb);
+	musb->is_runtime_suspended = 1;
 
 	return 0;
 }
 
 static int musb_runtime_resume(struct device *dev)
 {
-	struct musb	*musb = dev_to_musb(dev);
-	static int	first = 1;
+	struct musb *musb = dev_to_musb(dev);
+	unsigned long flags;
+	int error;
 
 	/*
 	 * When pm_runtime_get_sync called for the first time in driver
@@ -2640,9 +2742,10 @@ static int musb_runtime_resume(struct device *dev)
 	 * Also context restore without save does not make
 	 * any sense
 	 */
-	if (!first)
-		musb_restore_context(musb);
-	first = 0;
+	if (!musb->is_initialized)
+		return 0;
+
+	musb_restore_context(musb);
 
 	if (musb->need_finish_resume) {
 		musb->need_finish_resume = 0;
@@ -2650,6 +2753,14 @@ static int musb_runtime_resume(struct device *dev)
 				msecs_to_jiffies(USB_RESUME_TIMEOUT));
 	}
 
+	spin_lock_irqsave(&musb->lock, flags);
+	error = musb_run_resume_work(musb);
+	if (error)
+		dev_err(musb->controller, "resume work failed with %i\n",
+			error);
+	musb->is_runtime_suspended = 0;
+	spin_unlock_irqrestore(&musb->lock, flags);
+
 	return 0;
 }
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 2cb88a498f8a..91817d77d59c 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -303,13 +303,14 @@ struct musb_context_registers {
 struct musb {
 	/* device lock */
 	spinlock_t		lock;
+	spinlock_t		list_lock;	/* resume work list lock */
 
 	struct musb_io		io;
 	const struct musb_platform_ops *ops;
 	struct musb_context_registers context;
 
 	irqreturn_t		(*isr)(int, void *);
-	struct work_struct	irq_work;
+	struct delayed_work	irq_work;
 	struct delayed_work	deassert_reset_work;
 	struct delayed_work	finish_resume_work;
 	struct delayed_work	gadget_work;
@@ -337,6 +338,7 @@ struct musb {
 	struct list_head	control;	/* of musb_qh */
 	struct list_head	in_bulk;	/* of musb_qh */
 	struct list_head	out_bulk;	/* of musb_qh */
+	struct list_head	pending_list;	/* pending work list */
 
 	struct timer_list	otg_timer;
 	struct notifier_block	nb;
@@ -379,12 +381,15 @@ struct musb {
 
 	int			port_mode;	/* MUSB_PORT_MODE_* */
 	bool			session;
-	bool			quirk_invalid_vbus;
+	unsigned long		quirk_retries;
 	bool			is_host;
 
 	int			a_wait_bcon;	/* VBUS timeout in msecs */
 	unsigned long		idle_timeout;	/* Next timeout in jiffies */
 
+	unsigned		is_initialized:1;
+	unsigned		is_runtime_suspended:1;
+
 	/* active means connected and not suspended */
 	unsigned		is_active:1;
 
@@ -540,6 +545,10 @@ extern irqreturn_t musb_interrupt(struct musb *);
 
 extern void musb_hnp_stop(struct musb *musb);
 
+int musb_queue_resume_work(struct musb *musb,
+			   int (*callback)(struct musb *musb, void *data),
+			   void *data);
+
 static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
 {
 	if (musb->ops->set_vbus)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 0f17d2140db6..feae1561b9ab 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -185,24 +185,19 @@ static void dsps_musb_disable(struct musb *musb)
 	musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
 	musb_writel(reg_base, wrp->epintr_clear,
 			 wrp->txep_bitmap | wrp->rxep_bitmap);
+	del_timer_sync(&glue->timer);
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 }
 
-static void otg_timer(unsigned long _musb)
+/* Caller must take musb->lock */
+static int dsps_check_status(struct musb *musb, void *unused)
 {
-	struct musb *musb = (void *)_musb;
 	void __iomem *mregs = musb->mregs;
 	struct device *dev = musb->controller;
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
 	const struct dsps_musb_wrapper *wrp = glue->wrp;
 	u8 devctl;
-	unsigned long flags;
 	int skip_session = 0;
-	int err;
-
-	err = pm_runtime_get_sync(dev);
-	if (err < 0)
-		dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
 
 	/*
 	 * We poll because DSPS IP's won't expose several OTG-critical
@@ -212,7 +207,6 @@ static void otg_timer(unsigned long _musb)
 	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
 				usb_otg_state_string(musb->xceiv->otg->state));
 
-	spin_lock_irqsave(&musb->lock, flags);
 	switch (musb->xceiv->otg->state) {
 	case OTG_STATE_A_WAIT_VRISE:
 		mod_timer(&glue->timer, jiffies +
@@ -245,8 +239,30 @@ static void otg_timer(unsigned long _musb)
 	default:
 		break;
 	}
-	spin_unlock_irqrestore(&musb->lock, flags);
 
+	return 0;
+}
+
+static void otg_timer(unsigned long _musb)
+{
+	struct musb *musb = (void *)_musb;
+	struct device *dev = musb->controller;
+	unsigned long flags;
+	int err;
+
+	err = pm_runtime_get(dev);
+	if ((err != -EINPROGRESS) && err < 0) {
+		dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
+		pm_runtime_put_noidle(dev);
+
+		return;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	err = musb_queue_resume_work(musb, dsps_check_status, NULL);
+	if (err < 0)
+		dev_err(dev, "%s resume work: %i\n", __func__, err);
+	spin_unlock_irqrestore(&musb->lock, flags);
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
 }
@@ -767,28 +783,13 @@ static int dsps_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, glue);
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_set_autosuspend_delay(&pdev->dev, 200);
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "pm_runtime_get_sync FAILED");
-		goto err2;
-	}
-
 	ret = dsps_create_musb_pdev(glue, pdev);
 	if (ret)
-		goto err3;
-
-	pm_runtime_mark_last_busy(&pdev->dev);
-	pm_runtime_put_autosuspend(&pdev->dev);
+		goto err;
 
 	return 0;
 
-err3:
-	pm_runtime_put_sync(&pdev->dev);
-err2:
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
+err:
 	pm_runtime_disable(&pdev->dev);
 	return ret;
 }
@@ -799,9 +800,6 @@ static int dsps_remove(struct platform_device *pdev)
 
 	platform_device_unregister(glue->musb);
 
-	/* disable usbss clocks */
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
-	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 4042ea017985..a55173c9e564 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1114,7 +1114,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 			musb_ep->dma ? "dma, " : "",
 			musb_ep->packet_sz);
 
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 fail:
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -1158,7 +1158,7 @@ static int musb_gadget_disable(struct usb_ep *ep)
 	musb_ep->desc = NULL;
 	musb_ep->end_point.desc = NULL;
 
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	spin_unlock_irqrestore(&(musb->lock), flags);
 
@@ -1222,13 +1222,22 @@ void musb_ep_restart(struct musb *musb, struct musb_request *req)
 		rxstate(musb, req);
 }
 
+static int musb_ep_restart_resume_work(struct musb *musb, void *data)
+{
+	struct musb_request *req = data;
+
+	musb_ep_restart(musb, req);
+
+	return 0;
+}
+
 static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 			gfp_t gfp_flags)
 {
 	struct musb_ep		*musb_ep;
 	struct musb_request	*request;
 	struct musb		*musb;
-	int			status = 0;
+	int			status;
 	unsigned long		lockflags;
 
 	if (!ep || !req)
@@ -1245,6 +1254,17 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	if (request->ep != musb_ep)
 		return -EINVAL;
 
+	status = pm_runtime_get(musb->controller);
+	if ((status != -EINPROGRESS) && status < 0) {
+		dev_err(musb->controller,
+			"pm runtime get failed in %s\n",
+			__func__);
+		pm_runtime_put_noidle(musb->controller);
+
+		return status;
+	}
+	status = 0;
+
 	trace_musb_req_enq(request);
 
 	/* request is mine now... */
@@ -1255,7 +1275,6 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 
 	map_dma_buffer(request, musb, musb_ep);
 
-	pm_runtime_get_sync(musb->controller);
 	spin_lock_irqsave(&musb->lock, lockflags);
 
 	/* don't queue if the ep is down */
@@ -1271,8 +1290,14 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	list_add_tail(&request->list, &musb_ep->req_list);
 
 	/* it this is the head of the queue, start i/o ... */
-	if (!musb_ep->busy && &request->list == musb_ep->req_list.next)
-		musb_ep_restart(musb, request);
+	if (!musb_ep->busy && &request->list == musb_ep->req_list.next) {
+		status = musb_queue_resume_work(musb,
+						musb_ep_restart_resume_work,
+						request);
+		if (status < 0)
+			dev_err(musb->controller, "%s resume work: %i\n",
+				__func__, status);
+	}
 
 unlock:
 	spin_unlock_irqrestore(&musb->lock, lockflags);
@@ -1969,7 +1994,7 @@ static int musb_gadget_stop(struct usb_gadget *g)
 	 */
 
 	/* Force check of devctl register for PM runtime */
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	pm_runtime_mark_last_busy(musb->controller);
 	pm_runtime_put_autosuspend(musb->controller);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index cc1225485509..e8be8e39ab8f 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -513,17 +513,18 @@ static int omap2430_probe(struct platform_device *pdev)
 	}
 
 	pm_runtime_enable(glue->dev);
-	pm_runtime_use_autosuspend(glue->dev);
-	pm_runtime_set_autosuspend_delay(glue->dev, 100);
 
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
+		goto err3;
 	}
 
 	return 0;
 
+err3:
+	pm_runtime_disable(glue->dev);
+
 err2:
 	platform_device_put(musb);
 
@@ -535,10 +536,7 @@ static int omap2430_remove(struct platform_device *pdev)
 {
 	struct omap2430_glue *glue = platform_get_drvdata(pdev);
 
-	pm_runtime_get_sync(glue->dev);
 	platform_device_unregister(glue->musb);
-	pm_runtime_put_sync(glue->dev);
-	pm_runtime_dont_use_autosuspend(glue->dev);
 	pm_runtime_disable(glue->dev);
 
 	return 0;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index df7c9f46be54..e85cc8e4e7a9 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -724,7 +724,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
 				usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
 			idle_timeout = jiffies + (1 * HZ);
-			schedule_work(&musb->irq_work);
+			schedule_delayed_work(&musb->irq_work, 0);
 
 		} else /* A-dev state machine */ {
 			dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
@@ -814,7 +814,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			break;
 		}
 	}
-	schedule_work(&musb->irq_work);
+	schedule_delayed_work(&musb->irq_work, 0);
 
 	return idle_timeout;
 }
@@ -864,7 +864,7 @@ static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
 		musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
 		if (reg & ~TUSB_PRCM_WNORCS) {
 			musb->is_active = 1;
-			schedule_work(&musb->irq_work);
+			schedule_delayed_work(&musb->irq_work, 0);
 		}
 		dev_dbg(musb->controller, "wake %sactive %02x\n",
 				musb->is_active ? "" : "in", reg);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index f61477bed3a8..243ac5ebe46a 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -131,6 +131,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
+	{ USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */
 	{ USB_DEVICE(0x10C4, 0x8977) },	/* CEL MeshWorks DevKit Device */
 	{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
 	{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0ff7f38d7800..6e9fc8bcc285 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1012,6 +1012,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
 	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
+	{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 21011c0a4c64..48ee04c94a75 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -596,6 +596,12 @@
 #define STK541_PID		0x2109 /* Zigbee Controller */
 
 /*
+ * Texas Instruments
+ */
+#define TI_VID			0x0451
+#define TI_CC3200_LAUNCHPAD_PID	0xC32A /* SimpleLink Wi-Fi CC3200 LaunchPad */
+
+/*
  * Blackfin gnICE JTAG
  * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
  */
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index ffd086733421..1a59f335b063 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -954,10 +954,15 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 
 	/* COMMAND STAGE */
 	/* let's send the command via the control pipe */
+	/*
+	 * Command is sometime (f.e. after scsi_eh_prep_cmnd) on the stack.
+	 * Stack may be vmallocated.  So no DMA for us.  Make a copy.
+	 */
+	memcpy(us->iobuf, srb->cmnd, srb->cmd_len);
 	result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 				      US_CBI_ADSC, 
 				      USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, 
-				      us->ifnum, srb->cmnd, srb->cmd_len);
+				      us->ifnum, us->iobuf, srb->cmd_len);
 
 	/* check the return code for the command */
 	usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n",
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fdd3228e0678..3eb58cb51e56 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -155,6 +155,7 @@ config TANGOX_WATCHDOG
 config WDAT_WDT
 	tristate "ACPI Watchdog Action Table (WDAT)"
 	depends on ACPI
+	select WATCHDOG_CORE
 	select ACPI_WATCHDOG
 	help
 	  This driver adds support for systems with ACPI Watchdog Action