Merge branch 'clk-exynos-cpu-clk' into clk-next

Folded into this merge commit is a build error fix: s/clk/core in
clk_change_rate due to the new struct clk_core

10 files changed, 450 insertions, 211 deletions

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1cf479b9f3b4..059e5d25c9ba 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1417,6 +1417,9 @@ static void clk_change_rate(struct clk_core *core)
 	if (core->notifier_count && old_rate != core->rate)
 		__clk_notify(core, POST_RATE_CHANGE, old_rate, core->rate);
 
+	if (core->flags & CLK_RECALC_NEW_RATES)
+		(void)clk_calc_new_rates(core, core->new_rate);
+
 	/*
 	 * Use safe iteration, as change_rate can actually swap parents
 	 * for certain clock types.
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index a17683b2cf27..5f6833ea355d 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -2,7 +2,7 @@
 # Samsung Clock specific Makefile
 #
 
-obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
+obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o clk-cpu.o
 obj-$(CONFIG_SOC_EXYNOS3250)	+= clk-exynos3250.o
 obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
 obj-$(CONFIG_SOC_EXYNOS4415)	+= clk-exynos4415.o
diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
new file mode 100644
index 000000000000..3a1fe07cfe9e
--- /dev/null
+++ b/drivers/clk/samsung/clk-cpu.c
@@ -0,0 +1,349 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the utility function to register CPU clock for Samsung
+ * Exynos platforms. A CPU clock is defined as a clock supplied to a CPU or a
+ * group of CPUs. The CPU clock is typically derived from a hierarchy of clock
+ * blocks which includes mux and divider blocks. There are a number of other
+ * auxiliary clocks supplied to the CPU domain such as the debug blocks and AXI
+ * clock for CPU domain. The rates of these auxiliary clocks are related to the
+ * CPU clock rate and this relation is usually specified in the hardware manual
+ * of the SoC or supplied after the SoC characterization.
+ *
+ * The below implementation of the CPU clock allows the rate changes of the CPU
+ * clock and the corresponding rate changes of the auxillary clocks of the CPU
+ * domain. The platform clock driver provides a clock register configuration
+ * for each configurable rate which is then used to program the clock hardware
+ * registers to acheive a fast co-oridinated rate change for all the CPU domain
+ * clocks.
+ *
+ * On a rate change request for the CPU clock, the rate change is propagated
+ * upto the PLL supplying the clock to the CPU domain clock blocks. While the
+ * CPU domain PLL is reconfigured, the CPU domain clocks are driven using an
+ * alternate clock source. If required, the alternate clock source is divided
+ * down in order to keep the output clock rate within the previous OPP limits.
+*/
+
+#include <linux/errno.h>
+#include "clk-cpu.h"
+
+#define E4210_SRC_CPU		0x0
+#define E4210_STAT_CPU		0x200
+#define E4210_DIV_CPU0		0x300
+#define E4210_DIV_CPU1		0x304
+#define E4210_DIV_STAT_CPU0	0x400
+#define E4210_DIV_STAT_CPU1	0x404
+
+#define E4210_DIV0_RATIO0_MASK	0x7
+#define E4210_DIV1_HPM_MASK	(0x7 << 4)
+#define E4210_DIV1_COPY_MASK	(0x7 << 0)
+#define E4210_MUX_HPM_MASK	(1 << 20)
+#define E4210_DIV0_ATB_SHIFT	16
+#define E4210_DIV0_ATB_MASK	(DIV_MASK << E4210_DIV0_ATB_SHIFT)
+
+#define MAX_DIV			8
+#define DIV_MASK		7
+#define DIV_MASK_ALL		0xffffffff
+#define MUX_MASK		7
+
+/*
+ * Helper function to wait until divider(s) have stabilized after the divider
+ * value has changed.
+ */
+static void wait_until_divider_stable(void __iomem *div_reg, unsigned long mask)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	do {
+		if (!(readl(div_reg) & mask))
+			return;
+	} while (time_before(jiffies, timeout));
+
+	if (!(readl(div_reg) & mask))
+		return;
+
+	pr_err("%s: timeout in divider stablization\n", __func__);
+}
+
+/*
+ * Helper function to wait until mux has stabilized after the mux selection
+ * value was changed.
+ */
+static void wait_until_mux_stable(void __iomem *mux_reg, u32 mux_pos,
+					unsigned long mux_value)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	do {
+		if (((readl(mux_reg) >> mux_pos) & MUX_MASK) == mux_value)
+			return;
+	} while (time_before(jiffies, timeout));
+
+	if (((readl(mux_reg) >> mux_pos) & MUX_MASK) == mux_value)
+		return;
+
+	pr_err("%s: re-parenting mux timed-out\n", __func__);
+}
+
+/* common round rate callback useable for all types of CPU clocks */
+static long exynos_cpuclk_round_rate(struct clk_hw *hw,
+			unsigned long drate, unsigned long *prate)
+{
+	struct clk *parent = __clk_get_parent(hw->clk);
+	*prate = __clk_round_rate(parent, drate);
+	return *prate;
+}
+
+/* common recalc rate callback useable for all types of CPU clocks */
+static unsigned long exynos_cpuclk_recalc_rate(struct clk_hw *hw,
+			unsigned long parent_rate)
+{
+	/*
+	 * The CPU clock output (armclk) rate is the same as its parent
+	 * rate. Although there exist certain dividers inside the CPU
+	 * clock block that could be used to divide the parent clock,
+	 * the driver does not make use of them currently, except during
+	 * frequency transitions.
+	 */
+	return parent_rate;
+}
+
+static const struct clk_ops exynos_cpuclk_clk_ops = {
+	.recalc_rate = exynos_cpuclk_recalc_rate,
+	.round_rate = exynos_cpuclk_round_rate,
+};
+
+/*
+ * Helper function to set the 'safe' dividers for the CPU clock. The parameters
+ * div and mask contain the divider value and the register bit mask of the
+ * dividers to be programmed.
+ */
+static void exynos_set_safe_div(void __iomem *base, unsigned long div,
+					unsigned long mask)
+{
+	unsigned long div0;
+
+	div0 = readl(base + E4210_DIV_CPU0);
+	div0 = (div0 & ~mask) | (div & mask);
+	writel(div0, base + E4210_DIV_CPU0);
+	wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, mask);
+}
+
+/* handler for pre-rate change notification from parent clock */
+static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
+			struct exynos_cpuclk *cpuclk, void __iomem *base)
+{
+	const struct exynos_cpuclk_cfg_data *cfg_data = cpuclk->cfg;
+	unsigned long alt_prate = clk_get_rate(cpuclk->alt_parent);
+	unsigned long alt_div = 0, alt_div_mask = DIV_MASK;
+	unsigned long div0, div1 = 0, mux_reg;
+
+	/* find out the divider values to use for clock data */
+	while ((cfg_data->prate * 1000) != ndata->new_rate) {
+		if (cfg_data->prate == 0)
+			return -EINVAL;
+		cfg_data++;
+	}
+
+	spin_lock(cpuclk->lock);
+
+	/*
+	 * For the selected PLL clock frequency, get the pre-defined divider
+	 * values. If the clock for sclk_hpm is not sourced from apll, then
+	 * the values for DIV_COPY and DIV_HPM dividers need not be set.
+	 */
+	div0 = cfg_data->div0;
+	if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) {
+		div1 = cfg_data->div1;
+		if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK)
+			div1 = readl(base + E4210_DIV_CPU1) &
+				(E4210_DIV1_HPM_MASK | E4210_DIV1_COPY_MASK);
+	}
+
+	/*
+	 * If the old parent clock speed is less than the clock speed of
+	 * the alternate parent, then it should be ensured that at no point
+	 * the armclk speed is more than the old_prate until the dividers are
+	 * set.  Also workaround the issue of the dividers being set to lower
+	 * values before the parent clock speed is set to new lower speed
+	 * (this can result in too high speed of armclk output clocks).
+	 */
+	if (alt_prate > ndata->old_rate || ndata->old_rate > ndata->new_rate) {
+		unsigned long tmp_rate = min(ndata->old_rate, ndata->new_rate);
+
+		alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1;
+		WARN_ON(alt_div >= MAX_DIV);
+
+		if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+			/*
+			 * In Exynos4210, ATB clock parent is also mout_core. So
+			 * ATB clock also needs to be mantained at safe speed.
+			 */
+			alt_div |= E4210_DIV0_ATB_MASK;
+			alt_div_mask |= E4210_DIV0_ATB_MASK;
+		}
+		exynos_set_safe_div(base, alt_div, alt_div_mask);
+		div0 |= alt_div;
+	}
+
+	/* select sclk_mpll as the alternate parent */
+	mux_reg = readl(base + E4210_SRC_CPU);
+	writel(mux_reg | (1 << 16), base + E4210_SRC_CPU);
+	wait_until_mux_stable(base + E4210_STAT_CPU, 16, 2);
+
+	/* alternate parent is active now. set the dividers */
+	writel(div0, base + E4210_DIV_CPU0);
+	wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL);
+
+	if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) {
+		writel(div1, base + E4210_DIV_CPU1);
+		wait_until_divider_stable(base + E4210_DIV_STAT_CPU1,
+				DIV_MASK_ALL);
+	}
+
+	spin_unlock(cpuclk->lock);
+	return 0;
+}
+
+/* handler for post-rate change notification from parent clock */
+static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata,
+			struct exynos_cpuclk *cpuclk, void __iomem *base)
+{
+	const struct exynos_cpuclk_cfg_data *cfg_data = cpuclk->cfg;
+	unsigned long div = 0, div_mask = DIV_MASK;
+	unsigned long mux_reg;
+
+	/* find out the divider values to use for clock data */
+	if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+		while ((cfg_data->prate * 1000) != ndata->new_rate) {
+			if (cfg_data->prate == 0)
+				return -EINVAL;
+			cfg_data++;
+		}
+	}
+
+	spin_lock(cpuclk->lock);
+
+	/* select mout_apll as the alternate parent */
+	mux_reg = readl(base + E4210_SRC_CPU);
+	writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU);
+	wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1);
+
+	if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+		div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK);
+		div_mask |= E4210_DIV0_ATB_MASK;
+	}
+
+	exynos_set_safe_div(base, div, div_mask);
+	spin_unlock(cpuclk->lock);
+	return 0;
+}
+
+/*
+ * This notifier function is called for the pre-rate and post-rate change
+ * notifications of the parent clock of cpuclk.
+ */
+static int exynos_cpuclk_notifier_cb(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct exynos_cpuclk *cpuclk;
+	void __iomem *base;
+	int err = 0;
+
+	cpuclk = container_of(nb, struct exynos_cpuclk, clk_nb);
+	base = cpuclk->ctrl_base;
+
+	if (event == PRE_RATE_CHANGE)
+		err = exynos_cpuclk_pre_rate_change(ndata, cpuclk, base);
+	else if (event == POST_RATE_CHANGE)
+		err = exynos_cpuclk_post_rate_change(ndata, cpuclk, base);
+
+	return notifier_from_errno(err);
+}
+
+/* helper function to register a CPU clock */
+int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
+		unsigned int lookup_id, const char *name, const char *parent,
+		const char *alt_parent, unsigned long offset,
+		const struct exynos_cpuclk_cfg_data *cfg,
+		unsigned long num_cfgs, unsigned long flags)
+{
+	struct exynos_cpuclk *cpuclk;
+	struct clk_init_data init;
+	struct clk *clk;
+	int ret = 0;
+
+	cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
+	if (!cpuclk)
+		return -ENOMEM;
+
+	init.name = name;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+	init.ops = &exynos_cpuclk_clk_ops;
+
+	cpuclk->hw.init = &init;
+	cpuclk->ctrl_base = ctx->reg_base + offset;
+	cpuclk->lock = &ctx->lock;
+	cpuclk->flags = flags;
+	cpuclk->clk_nb.notifier_call = exynos_cpuclk_notifier_cb;
+
+	cpuclk->alt_parent = __clk_lookup(alt_parent);
+	if (!cpuclk->alt_parent) {
+		pr_err("%s: could not lookup alternate parent %s\n",
+				__func__, alt_parent);
+		ret = -EINVAL;
+		goto free_cpuclk;
+	}
+
+	clk = __clk_lookup(parent);
+	if (!clk) {
+		pr_err("%s: could not lookup parent clock %s\n",
+				__func__, parent);
+		ret = -EINVAL;
+		goto free_cpuclk;
+	}
+
+	ret = clk_notifier_register(clk, &cpuclk->clk_nb);
+	if (ret) {
+		pr_err("%s: failed to register clock notifier for %s\n",
+				__func__, name);
+		goto free_cpuclk;
+	}
+
+	cpuclk->cfg = kmemdup(cfg, sizeof(*cfg) * num_cfgs, GFP_KERNEL);
+	if (!cpuclk->cfg) {
+		pr_err("%s: could not allocate memory for cpuclk data\n",
+				__func__);
+		ret = -ENOMEM;
+		goto unregister_clk_nb;
+	}
+
+	clk = clk_register(NULL, &cpuclk->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: could not register cpuclk %s\n", __func__,	name);
+		ret = PTR_ERR(clk);
+		goto free_cpuclk_data;
+	}
+
+	samsung_clk_add_lookup(ctx, clk, lookup_id);
+	return 0;
+
+free_cpuclk_data:
+	kfree(cpuclk->cfg);
+unregister_clk_nb:
+	clk_notifier_unregister(__clk_lookup(parent), &cpuclk->clk_nb);
+free_cpuclk:
+	kfree(cpuclk);
+	return ret;
+}
diff --git a/drivers/clk/samsung/clk-cpu.h b/drivers/clk/samsung/clk-cpu.h
new file mode 100644
index 000000000000..37874d3c3165
--- /dev/null
+++ b/drivers/clk/samsung/clk-cpu.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for all PLL's in Samsung platforms
+*/
+
+#ifndef __SAMSUNG_CLK_CPU_H
+#define __SAMSUNG_CLK_CPU_H
+
+#include "clk.h"
+
+/**
+ * struct exynos_cpuclk_data: config data to setup cpu clocks.
+ * @prate: frequency of the primary parent clock (in KHz).
+ * @div0: value to be programmed in the div_cpu0 register.
+ * @div1: value to be programmed in the div_cpu1 register.
+ *
+ * This structure holds the divider configuration data for dividers in the CPU
+ * clock domain. The parent frequency at which these divider values are valid is
+ * specified in @prate. The @prate is the frequency of the primary parent clock.
+ * For CPU clock domains that do not have a DIV1 register, the @div1 member
+ * value is not used.
+ */
+struct exynos_cpuclk_cfg_data {
+	unsigned long	prate;
+	unsigned long	div0;
+	unsigned long	div1;
+};
+
+/**
+ * struct exynos_cpuclk: information about clock supplied to a CPU core.
+ * @hw:	handle between CCF and CPU clock.
+ * @alt_parent: alternate parent clock to use when switching the speed
+ *	of the primary parent clock.
+ * @ctrl_base:	base address of the clock controller.
+ * @lock: cpu clock domain register access lock.
+ * @cfg: cpu clock rate configuration data.
+ * @num_cfgs: number of array elements in @cfg array.
+ * @clk_nb: clock notifier registered for changes in clock speed of the
+ *	primary parent clock.
+ * @flags: configuration flags for the CPU clock.
+ *
+ * This structure holds information required for programming the CPU clock for
+ * various clock speeds.
+ */
+struct exynos_cpuclk {
+	struct clk_hw				hw;
+	struct clk				*alt_parent;
+	void __iomem				*ctrl_base;
+	spinlock_t				*lock;
+	const struct exynos_cpuclk_cfg_data	*cfg;
+	const unsigned long			num_cfgs;
+	struct notifier_block			clk_nb;
+	unsigned long				flags;
+
+/* The CPU clock registers has DIV1 configuration register */
+#define CLK_CPU_HAS_DIV1		(1 << 0)
+/* When ALT parent is active, debug clocks need safe divider values */
+#define CLK_CPU_NEEDS_DEBUG_ALT_DIV	(1 << 1)
+};
+
+extern int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
+			unsigned int lookup_id, const char *name,
+			const char *parent, const char *alt_parent,
+			unsigned long offset,
+			const struct exynos_cpuclk_cfg_data *cfg,
+			unsigned long num_cfgs, unsigned long flags);
+
+#endif /* __SAMSUNG_CLK_CPU_H */
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 714d6ba782c8..cae2c048488d 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -19,6 +19,7 @@
 #include <linux/syscore_ops.h>
 
 #include "clk.h"
+#include "clk-cpu.h"
 
 /* Exynos4 clock controller register offsets */
 #define SRC_LEFTBUS		0x4200
@@ -534,7 +535,8 @@ static struct samsung_fixed_factor_clock exynos4x12_fixed_factor_clks[] __initda
 /* list of mux clocks supported in all exynos4 soc's */
 static struct samsung_mux_clock exynos4_mux_clks[] __initdata = {
 	MUX_FA(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
-			CLK_SET_RATE_PARENT, 0, "mout_apll"),
+			CLK_SET_RATE_PARENT | CLK_RECALC_NEW_RATES, 0,
+			"mout_apll"),
 	MUX(CLK_MOUT_HDMI, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1),
 	MUX(0, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1),
 	MUX(0, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
@@ -1378,6 +1380,22 @@ static void __init exynos4x12_core_down_clock(void)
 	__raw_writel(0x0, reg_base + E4X12_PWR_CTRL2);
 }
 
+#define E4210_CPU_DIV0(apll, pclk_dbg, atb, periph, corem1, corem0)	\
+		(((apll) << 24) | ((pclk_dbg) << 20) | ((atb) << 16) |	\
+		((periph) << 12) | ((corem1) << 8) | ((corem0) <<  4))
+#define E4210_CPU_DIV1(hpm, copy)					\
+		(((hpm) << 4) | ((copy) << 0))
+
+static const struct exynos_cpuclk_cfg_data e4210_armclk_d[] __initconst = {
+	{ 1200000, E4210_CPU_DIV0(7, 1, 4, 3, 7, 3), E4210_CPU_DIV1(0, 5), },
+	{ 1000000, E4210_CPU_DIV0(7, 1, 4, 3, 7, 3), E4210_CPU_DIV1(0, 4), },
+	{  800000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
+	{  500000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
+	{  400000, E4210_CPU_DIV0(7, 1, 3, 3, 7, 3), E4210_CPU_DIV1(0, 3), },
+	{  200000, E4210_CPU_DIV0(0, 1, 1, 1, 3, 1), E4210_CPU_DIV1(0, 3), },
+	{  0 },
+};
+
 /* register exynos4 clocks */
 static void __init exynos4_clk_init(struct device_node *np,
 				    enum exynos4_soc soc)
@@ -1455,6 +1473,10 @@ static void __init exynos4_clk_init(struct device_node *np,
 		samsung_clk_register_fixed_factor(ctx,
 			exynos4210_fixed_factor_clks,
 			ARRAY_SIZE(exynos4210_fixed_factor_clks));
+		exynos_register_cpu_clock(ctx, CLK_ARM_CLK, "armclk",
+			mout_core_p4210[0], mout_core_p4210[1], 0x14200,
+			e4210_armclk_d, ARRAY_SIZE(e4210_armclk_d),
+			CLK_CPU_NEEDS_DEBUG_ALT_DIV | CLK_CPU_HAS_DIV1);
 	} else {
 		samsung_clk_register_mux(ctx, exynos4x12_mux_clks,
 			ARRAY_SIZE(exynos4x12_mux_clks));
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 4f3dbc8cf729..a86a196e32f6 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -36,17 +36,6 @@ config ARM_EXYNOS_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_EXYNOS4210_CPUFREQ
-	bool "SAMSUNG EXYNOS4210"
-	depends on CPU_EXYNOS4210
-	depends on ARM_EXYNOS_CPUFREQ
-	default y
-	help
-	  This adds the CPUFreq driver for Samsung EXYNOS4210
-	  SoC (S5PV310 or S5PC210).
-
-	  If in doubt, say N.
-
 config ARM_EXYNOS4X12_CPUFREQ
 	bool "SAMSUNG EXYNOS4x12"
 	depends on SOC_EXYNOS4212 || SOC_EXYNOS4412
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index cdce92ae2e8b..2169bf792db7 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= arm-exynos-cpufreq.o
 arm-exynos-cpufreq-y					:= exynos-cpufreq.o
-arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
 arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
 arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 82d2fbb20f7e..fb24aaf4adcf 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -168,10 +168,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 
 	exynos_info->dev = &pdev->dev;
 
-	if (of_machine_is_compatible("samsung,exynos4210")) {
-		exynos_info->type = EXYNOS_SOC_4210;
-		ret = exynos4210_cpufreq_init(exynos_info);
-	} else if (of_machine_is_compatible("samsung,exynos4212")) {
+	if (of_machine_is_compatible("samsung,exynos4212")) {
 		exynos_info->type = EXYNOS_SOC_4212;
 		ret = exynos4x12_cpufreq_init(exynos_info);
 	} else if (of_machine_is_compatible("samsung,exynos4412")) {
diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index 9f2062a7cc02..a3855e4d913d 100644
--- a/drivers/cpufreq/exynos-cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -18,7 +18,6 @@ enum cpufreq_level_index {
 };
 
 enum exynos_soc_type {
-	EXYNOS_SOC_4210,
 	EXYNOS_SOC_4212,
 	EXYNOS_SOC_4412,
 	EXYNOS_SOC_5250,
@@ -53,14 +52,6 @@ struct exynos_dvfs_info {
 	void __iomem	*cmu_regs;
 };
 
-#ifdef CONFIG_ARM_EXYNOS4210_CPUFREQ
-extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
-#else
-static inline int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
-{
-	return -EOPNOTSUPP;
-}
-#endif
 #ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ
 extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
 #else
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
deleted file mode 100644
index 843ec824fd91..000000000000
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 - CPU frequency scaling support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/cpufreq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "exynos-cpufreq.h"
-
-static struct clk *cpu_clk;
-static struct clk *moutcore;
-static struct clk *mout_mpll;
-static struct clk *mout_apll;
-static struct exynos_dvfs_info *cpufreq;
-
-static unsigned int exynos4210_volt_table[] = {
-	1250000, 1150000, 1050000, 975000, 950000,
-};
-
-static struct cpufreq_frequency_table exynos4210_freq_table[] = {
-	{0, L0, 1200 * 1000},
-	{0, L1, 1000 * 1000},
-	{0, L2,  800 * 1000},
-	{0, L3,  500 * 1000},
-	{0, L4,  200 * 1000},
-	{0, 0, CPUFREQ_TABLE_END},
-};
-
-static struct apll_freq apll_freq_4210[] = {
-	/*
-	 * values:
-	 * freq
-	 * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, RESERVED
-	 * clock divider for COPY, HPM, RESERVED
-	 * PLL M, P, S
-	 */
-	APLL_FREQ(1200, 0, 3, 7, 3, 4, 1, 7, 0, 5, 0, 0, 150, 3, 1),
-	APLL_FREQ(1000, 0, 3, 7, 3, 4, 1, 7, 0, 4, 0, 0, 250, 6, 1),
-	APLL_FREQ(800,  0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 200, 6, 1),
-	APLL_FREQ(500,  0, 3, 7, 3, 3, 1, 7, 0, 3, 0, 0, 250, 6, 2),
-	APLL_FREQ(200,  0, 1, 3, 1, 3, 1, 0, 0, 3, 0, 0, 200, 6, 3),
-};
-
-static void exynos4210_set_clkdiv(unsigned int div_index)
-{
-	unsigned int tmp;
-
-	/* Change Divider - CPU0 */
-
-	tmp = apll_freq_4210[div_index].clk_div_cpu0;
-
-	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU);
-
-	do {
-		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU);
-	} while (tmp & 0x1111111);
-
-	/* Change Divider - CPU1 */
-
-	tmp = apll_freq_4210[div_index].clk_div_cpu1;
-
-	__raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1);
-
-	do {
-		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1);
-	} while (tmp & 0x11);
-}
-
-static void exynos4210_set_apll(unsigned int index)
-{
-	unsigned int tmp, freq = apll_freq_4210[index].freq;
-
-	/* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
-	clk_set_parent(moutcore, mout_mpll);
-
-	do {
-		tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU)
-			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
-		tmp &= 0x7;
-	} while (tmp != 0x2);
-
-	clk_set_rate(mout_apll, freq * 1000);
-
-	/* MUX_CORE_SEL = APLL */
-	clk_set_parent(moutcore, mout_apll);
-
-	do {
-		tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU);
-		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
-	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
-}
-
-static void exynos4210_set_frequency(unsigned int old_index,
-				     unsigned int new_index)
-{
-	if (old_index > new_index) {
-		exynos4210_set_clkdiv(new_index);
-		exynos4210_set_apll(new_index);
-	} else if (old_index < new_index) {
-		exynos4210_set_apll(new_index);
-		exynos4210_set_clkdiv(new_index);
-	}
-}
-
-int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
-{
-	struct device_node *np;
-	unsigned long rate;
-
-	/*
-	 * HACK: This is a temporary workaround to get access to clock
-	 * controller registers directly and remove static mappings and
-	 * dependencies on platform headers. It is necessary to enable
-	 * Exynos multi-platform support and will be removed together with
-	 * this whole driver as soon as Exynos gets migrated to use
-	 * cpufreq-dt driver.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-clock");
-	if (!np) {
-		pr_err("%s: failed to find clock controller DT node\n",
-			__func__);
-		return -ENODEV;
-	}
-
-	info->cmu_regs = of_iomap(np, 0);
-	if (!info->cmu_regs) {
-		pr_err("%s: failed to map CMU registers\n", __func__);
-		return -EFAULT;
-	}
-
-	cpu_clk = clk_get(NULL, "armclk");
-	if (IS_ERR(cpu_clk))
-		return PTR_ERR(cpu_clk);
-
-	moutcore = clk_get(NULL, "moutcore");
-	if (IS_ERR(moutcore))
-		goto err_moutcore;
-
-	mout_mpll = clk_get(NULL, "mout_mpll");
-	if (IS_ERR(mout_mpll))
-		goto err_mout_mpll;
-
-	rate = clk_get_rate(mout_mpll) / 1000;
-
-	mout_apll = clk_get(NULL, "mout_apll");
-	if (IS_ERR(mout_apll))
-		goto err_mout_apll;
-
-	info->mpll_freq_khz = rate;
-	/* 800Mhz */
-	info->pll_safe_idx = L2;
-	info->cpu_clk = cpu_clk;
-	info->volt_table = exynos4210_volt_table;
-	info->freq_table = exynos4210_freq_table;
-	info->set_freq = exynos4210_set_frequency;
-
-	cpufreq = info;
-
-	return 0;
-
-err_mout_apll:
-	clk_put(mout_mpll);
-err_mout_mpll:
-	clk_put(moutcore);
-err_moutcore:
-	clk_put(cpu_clk);
-
-	pr_debug("%s: failed initialization\n", __func__);
-	return -EINVAL;
-}