Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, tsc: Skip TSC synchronization checks for tsc=reliable
  clocksource: Convert tcb_clksrc to use clocksource_register_hz/khz
  clocksource: cris: Convert to clocksource_register_khz
  clocksource: xtensa: Convert to clocksource_register_hz/khz
  clocksource: um: Convert to clocksource_register_hz/khz
  clocksource: parisc: Convert to clocksource_register_hz/khz
  clocksource: m86k: Convert to clocksource_register_hz/khz
  time: x86: Replace LATCH with PIT_LATCH in i8253 clocksource driver
  time: x86: Remove CLOCK_TICK_RATE from acpi_pm clocksource driver
  time: x86: Remove CLOCK_TICK_RATE from mach_timer.h
  time: x86: Remove CLOCK_TICK_RATE from tsc code
  time: Fix spelling mistakes in new comments
  time: fix bogus comment in timekeeping_get_ns_raw

3 files changed, 5 insertions, 7 deletions

diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index effe7974aa9a..6b5cf02c35c8 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -143,7 +143,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
 #ifndef CONFIG_X86_64
 #include <asm/mach_timer.h>
 #define PMTMR_EXPECTED_RATE \
-  ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (CLOCK_TICK_RATE>>10))
+  ((CALIBRATE_LATCH * (PMTMR_TICKS_PER_SEC >> 10)) / (PIT_TICK_RATE>>10))
 /*
  * Some boards have the PMTMR running way too fast. We check
  * the PMTMR rate against PIT channel 2 to catch these cases.
diff --git a/drivers/clocksource/i8253.c b/drivers/clocksource/i8253.c
index 27c49e60b7d6..e7cab2da910f 100644
--- a/drivers/clocksource/i8253.c
+++ b/drivers/clocksource/i8253.c
@@ -53,7 +53,7 @@ static cycle_t i8253_read(struct clocksource *cs)
 	count |= inb_p(PIT_CH0) << 8;
 
 	/* VIA686a test code... reset the latch if count > max + 1 */
-	if (count > LATCH) {
+	if (count > PIT_LATCH) {
 		outb_p(0x34, PIT_MODE);
 		outb_p(PIT_LATCH & 0xff, PIT_CH0);
 		outb_p(PIT_LATCH >> 8, PIT_CH0);
@@ -114,8 +114,8 @@ static void init_pit_timer(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		/* binary, mode 2, LSB/MSB, ch 0 */
 		outb_p(0x34, PIT_MODE);
-		outb_p(LATCH & 0xff , PIT_CH0);	/* LSB */
-		outb_p(LATCH >> 8 , PIT_CH0);		/* MSB */
+		outb_p(PIT_LATCH & 0xff , PIT_CH0);	/* LSB */
+		outb_p(PIT_LATCH >> 8 , PIT_CH0);		/* MSB */
 		break;
 
 	case CLOCK_EVT_MODE_SHUTDOWN:
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 79c47e88d5d1..55d0f95f82f9 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -59,7 +59,6 @@ static struct clocksource clksrc = {
 	.rating         = 200,
 	.read           = tc_get_cycles,
 	.mask           = CLOCKSOURCE_MASK(32),
-	.shift          = 18,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -256,7 +255,6 @@ static int __init tcb_clksrc_init(void)
 		best_divisor_idx = i;
 	}
 
-	clksrc.mult = clocksource_hz2mult(divided_rate, clksrc.shift);
 
 	printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
 			divided_rate / 1000000,
@@ -292,7 +290,7 @@ static int __init tcb_clksrc_init(void)
 	__raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
 
 	/* and away we go! */
-	clocksource_register(&clksrc);
+	clocksource_register_hz(&clksrc, divided_rate);
 
 	/* channel 2:  periodic and oneshot timer support */
 	setup_clkevents(tc, clk32k_divisor_idx);