summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorRoman Gushchin <klamm@yandex-team.ru>2015-10-31 10:53:50 +1100
committerNeilBrown <neilb@suse.com>2015-10-31 10:53:50 +1100
commitb8a9d66d043ffac116100775a469f05f5158c16f (patch)
tree919820a8816f109a663b940b7074bb1b6fb58b6a /drivers
parent8bce6d35b308d73cdb2ee273c95d711a55be688c (diff)
downloadlinux-b8a9d66d043ffac116100775a469f05f5158c16f.tar.bz2
md/raid5: fix locking in handle_stripe_clean_event()
After commit 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") __find_stripe() is called under conf->hash_locks + hash. But handle_stripe_clean_event() calls remove_hash() under conf->device_lock. Under some cirscumstances the hash chain can be circuited, and we get an infinite loop with disabled interrupts and locked hash lock in __find_stripe(). This leads to hard lockup on multiple CPUs and following system crash. I was able to reproduce this behavior on raid6 over 6 ssd disks. The devices_handle_discard_safely option should be set to enable trim support. The following script was used: for i in `seq 1 32`; do dd if=/dev/zero of=large$i bs=10M count=100 & done neilb: original was against a 3.x kernel. I forward-ported to 4.3-rc. This verison is suitable for any kernel since Commit: 59fc630b8b5f ("RAID5: batch adjacent full stripe write") (v4.1+). I'll post a version for earlier kernels to stable. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by: NeilBrown <neilb@suse.com> Cc: Shaohua Li <shli@kernel.org> Cc: <stable@vger.kernel.org> # 3.13 - 4.2
Diffstat (limited to 'drivers')
-rw-r--r--drivers/md/raid5.c6
1 files changed, 4 insertions, 2 deletions
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 49bb8d3ff9be..45933c160697 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3499,6 +3499,7 @@ returnbi:
}
if (!discard_pending &&
test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags)) {
+ int hash;
clear_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
if (sh->qd_idx >= 0) {
@@ -3512,16 +3513,17 @@ returnbi:
* no updated data, so remove it from hash list and the stripe
* will be reinitialized
*/
- spin_lock_irq(&conf->device_lock);
unhash:
+ hash = sh->hash_lock_index;
+ spin_lock_irq(conf->hash_locks + hash);
remove_hash(sh);
+ spin_unlock_irq(conf->hash_locks + hash);
if (head_sh->batch_head) {
sh = list_first_entry(&sh->batch_list,
struct stripe_head, batch_list);
if (sh != head_sh)
goto unhash;
}
- spin_unlock_irq(&conf->device_lock);
sh = head_sh;
if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))