Merge branch 'cleanup/__iomem' into next/cleanup2

* cleanup/__iomem:
  ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.
  ARM: ux500: use __iomem pointers for MMIO

Two new cleanup patches that were not already part of the
first cleanup branch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 10 insertions, 10 deletions

diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 272deddc8db6..21c60fea5d31 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -42,7 +42,7 @@ static irqreturn_t rpcmouse_irq(int irq, void *dev_id)
 
 	x = (short) iomd_readl(IOMD_MOUSEX);
 	y = (short) iomd_readl(IOMD_MOUSEY);
-	b = (short) (__raw_readl(0xe0310000) ^ 0x70);
+	b = (short) (__raw_readl(IOMEM(0xe0310000)) ^ 0x70);
 
 	dx = x - rpcmouse_lastx;
 	dy = y - rpcmouse_lasty;
diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c
index df808ac8cb65..6a40dd03a32f 100644
--- a/drivers/net/ethernet/seeq/ether3.c
+++ b/drivers/net/ethernet/seeq/ether3.c
@@ -99,13 +99,13 @@ typedef enum {
  * The SEEQ8005 doesn't like us writing to its registers
  * too quickly.
  */
-static inline void ether3_outb(int v, const void __iomem *r)
+static inline void ether3_outb(int v, void __iomem *r)
 {
 	writeb(v, r);
 	udelay(1);
 }
 
-static inline void ether3_outw(int v, const void __iomem *r)
+static inline void ether3_outw(int v, void __iomem *r)
 {
 	writew(v, r);
 	udelay(1);
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index edfd12b48c28..968d08358d20 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -273,7 +273,7 @@ static void eesoxscsi_buffer_out(void *buf, int length, void __iomem *base)
 {
 	const void __iomem *reg_fas = base + EESOX_FAS216_OFFSET;
 	const void __iomem *reg_dmastat = base + EESOX_DMASTAT;
-	const void __iomem *reg_dmadata = base + EESOX_DMADATA;
+	void __iomem *reg_dmadata = base + EESOX_DMADATA;
 
 	do {
 		unsigned int status;
diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c
index 7c13639c597e..9bd004f9da89 100644
--- a/drivers/tty/serial/serial_ks8695.c
+++ b/drivers/tty/serial/serial_ks8695.c
@@ -548,8 +548,8 @@ static struct uart_ops ks8695uart_pops = {
 
 static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
 	{
-		.membase	= (void *) KS8695_UART_VA,
-		.mapbase	= KS8695_UART_VA,
+		.membase	= KS8695_UART_VA,
+		.mapbase	= KS8695_UART_PA,
 		.iotype		= SERIAL_IO_MEM,
 		.irq		= KS8695_IRQ_UART_TX,
 		.uartclk	= KS8695_CLOCK_RATE * 16,
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 7ae9d53f2bf1..113d43a16f54 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -131,7 +131,7 @@
 #define UPPER_MARGIN	32
 #define LOWER_MARGIN	32
 
-static resource_size_t da8xx_fb_reg_base;
+static void __iomem *da8xx_fb_reg_base;
 static struct resource *lcdc_regs;
 static unsigned int lcd_revision;
 static irq_handler_t lcdc_irq_handler;
@@ -951,7 +951,7 @@ static int __devexit fb_remove(struct platform_device *dev)
 		clk_disable(par->lcdc_clk);
 		clk_put(par->lcdc_clk);
 		framebuffer_release(info);
-		iounmap((void __iomem *)da8xx_fb_reg_base);
+		iounmap(da8xx_fb_reg_base);
 		release_mem_region(lcdc_regs->start, resource_size(lcdc_regs));
 
 	}
@@ -1171,7 +1171,7 @@ static int __devinit fb_probe(struct platform_device *device)
 	if (!lcdc_regs)
 		return -EBUSY;
 
-	da8xx_fb_reg_base = (resource_size_t)ioremap(lcdc_regs->start, len);
+	da8xx_fb_reg_base = ioremap(lcdc_regs->start, len);
 	if (!da8xx_fb_reg_base) {
 		ret = -EBUSY;
 		goto err_request_mem;
@@ -1392,7 +1392,7 @@ err_clk_put:
 	clk_put(fb_clk);
 
 err_ioremap:
-	iounmap((void __iomem *)da8xx_fb_reg_base);
+	iounmap(da8xx_fb_reg_base);
 
 err_request_mem:
 	release_mem_region(lcdc_regs->start, len);