Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2: fix poll_controller to pass proper structures and check all rx queues
  niu: Fix readq implementation when architecture does not provide one.
  hostap: pad the skb->cb usage in lieu of a proper fix
  rtl8187 : support for Sitecom WL-168 0001 v4
  mac80211: fix notify_mac function
  rtl8187: Add Abocom USB ID
  net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller
  tcp_htcp: last_cong bug fix
  [netdrvr] smc911x: fix for driver resume (and compilation warning)
  RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface.
  cxgb3 - Limit multiqueue setting to msi-x
  cxgb3 - eeprom read fixes
  myri10ge: fix stop/go ordering even more

8 files changed, 28 insertions, 10 deletions

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 430d430bce29..d07e3f148951 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -7204,10 +7204,13 @@ static void
 poll_bnx2(struct net_device *dev)
 {
 	struct bnx2 *bp = netdev_priv(dev);
+	int i;
 
-	disable_irq(bp->pdev->irq);
-	bnx2_interrupt(bp->pdev->irq, dev);
-	enable_irq(bp->pdev->irq);
+	for (i = 0; i < bp->irq_nvecs; i++) {
+		disable_irq(bp->irq_tbl[i].vector);
+		bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]);
+		enable_irq(bp->irq_tbl[i].vector);
+	}
 }
 #endif
 
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 5e663ccda4d4..2c341f83d327 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -2701,7 +2701,7 @@ static void set_nqsets(struct adapter *adap)
 	int hwports = adap->params.nports;
 	int nqsets = SGE_QSETS;
 
-	if (adap->params.rev > 0) {
+	if (adap->params.rev > 0 && adap->flags & USING_MSIX) {
 		if (hwports == 2 &&
 		    (hwports * nqsets > SGE_QSETS ||
 		     num_cpus >= nqsets / hwports))
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 968f64be3743..9a0898b0dbce 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -572,7 +572,7 @@ struct t3_vpd {
 	u32 pad;		/* for multiple-of-4 sizing and alignment */
 };
 
-#define EEPROM_MAX_POLL   4
+#define EEPROM_MAX_POLL   40
 #define EEPROM_STAT_ADDR  0x4000
 #define VPD_BASE          0xc00
 
@@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
 			;
 
 		pti = &port_types[adapter->params.vpd.port_type[j]];
+		if (!pti->phy_prep) {
+			CH_ALERT(adapter, "Invalid port type index %d\n",
+				 adapter->params.vpd.port_type[j]);
+			return -EINVAL;
+		}
+
 		ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
 				    ai->mdio_ops);
 		if (ret)
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index a5f428bcc0eb..b37867097308 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.3-1.375"
+#define MYRI10GE_VERSION_STR "1.4.3-1.378"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
 		if (tx->req == tx->done) {
 			tx->queue_active = 0;
 			put_be32(htonl(1), tx->send_stop);
+			mb();
 			mmiowb();
 		}
 		__netif_tx_unlock(dev_queue);
@@ -2865,6 +2866,7 @@ again:
 	if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
 		tx->queue_active = 1;
 		put_be32(htonl(1), tx->send_go);
+		mb();
 		mmiowb();
 	}
 	tx->pkt_start++;
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 9acb5d70a3ae..d8463b1c3df3 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION);
 #ifndef readq
 static u64 readq(void __iomem *reg)
 {
-	return (((u64)readl(reg + 0x4UL) << 32) |
-		(u64)readl(reg));
+	return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32);
 }
 
 static void writeq(u64 val, void __iomem *reg)
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 5051554ff05b..1f26ab0e7986 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -2050,7 +2050,9 @@ err_out:
  */
 static int smc911x_drv_probe(struct platform_device *pdev)
 {
+#ifdef SMC_DYNAMIC_BUS_CONFIG
 	struct smc911x_platdata *pd = pdev->dev.platform_data;
+#endif
 	struct net_device *ndev;
 	struct resource *res;
 	struct smc911x_local *lp;
@@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev)
 
 		if (netif_running(ndev)) {
 			smc911x_reset(ndev);
-			smc911x_enable(ndev);
 			if (lp->phy_type != 0)
 				smc911x_phy_configure(&lp->phy_configure);
+			smc911x_enable(ndev);
 			netif_device_attach(ndev);
 		}
 	}
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index ffdf4876121b..a68f97c39359 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -918,9 +918,12 @@ struct hostap_interface {
 
 /*
  * TX meta data - stored in skb->cb buffer, so this must not be increased over
- * the 40-byte limit
+ * the 48-byte limit.
+ * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE
+ * TO SEE THE DAY.
  */
 struct hostap_skb_tx_data {
+	unsigned int __padding_for_default_qdiscs;
 	u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */
 	u8 rate; /* transmit rate */
 #define HOSTAP_TX_FLAGS_WDS BIT(0)
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index 431e3c78bf27..69eb0132593b 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -48,6 +48,9 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
 	{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
 	/* Sitecom */
 	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
+	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+	/* Abocom */
+	{USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
 	{}
 };