diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-02-24 09:04:21 -0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-02-24 09:04:21 -0800 |
commit | 428b315a2475d614d6efbdbeaa13f3977416b21a (patch) | |
tree | 4fb694251aa2aebb3040f4560cf3d9584234d2ca /drivers | |
parent | e5bdfd50d6f76077bf8441d130c606229e100d40 (diff) | |
parent | 3b2435192fe917a826c91c8b34032428d6efdfc7 (diff) | |
download | linux-428b315a2475d614d6efbdbeaa13f3977416b21a.tar.bz2 |
Merge tag 'fixes-for-v4.5-rc6' of http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.5-rc6
The most important fixes here are:
a) yet another fix to dwc3's EP transfer resource
assignment logic. This time around we will be
pre-allocating transfer resources to avoid any
future issues;
b) two DMA fixes for the old MUSB driver.
c) dwc2's data toggle fix for FS
Other than these, we have a few other minor fixes
elsewhere.
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/dwc2/Kconfig | 1 | ||||
-rw-r--r-- | drivers/usb/dwc2/core.c | 6 | ||||
-rw-r--r-- | drivers/usb/dwc2/hcd_ddma.c | 23 | ||||
-rw-r--r-- | drivers/usb/dwc2/hcd_intr.c | 8 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.h | 1 | ||||
-rw-r--r-- | drivers/usb/dwc3/ep0.c | 5 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 70 | ||||
-rw-r--r-- | drivers/usb/gadget/legacy/inode.c | 7 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/fsl_qe_udc.c | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/net2280.h | 15 | ||||
-rw-r--r-- | drivers/usb/gadget/udc/udc-core.c | 3 | ||||
-rw-r--r-- | drivers/usb/musb/musb_host.c | 8 | ||||
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 20 |
13 files changed, 106 insertions, 63 deletions
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index fd95ba6ec317..f0decc0d69b5 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -1,5 +1,6 @@ config USB_DWC2 tristate "DesignWare USB2 DRD Core Support" + depends on HAS_DMA depends on USB || USB_GADGET help Say Y here if your system has a Dual Role Hi-Speed USB diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index e991d55914db..46c4ba75dc2a 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -619,6 +619,12 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg) __func__, hsotg->dr_mode); break; } + + /* + * NOTE: This is required for some rockchip soc based + * platforms. + */ + msleep(50); } /* diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c index 36606fc33c0d..a41274aa52ad 100644 --- a/drivers/usb/dwc2/hcd_ddma.c +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -1174,14 +1174,11 @@ static int dwc2_process_non_isoc_desc(struct dwc2_hsotg *hsotg, failed = dwc2_update_non_isoc_urb_state_ddma(hsotg, chan, qtd, dma_desc, halt_status, n_bytes, xfer_done); - if (*xfer_done && urb->status != -EINPROGRESS) - failed = 1; - - if (failed) { + if (failed || (*xfer_done && urb->status != -EINPROGRESS)) { dwc2_host_complete(hsotg, qtd, urb->status); dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); - dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x status=%08x\n", - failed, *xfer_done, urb->status); + dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x\n", + failed, *xfer_done); return failed; } @@ -1236,21 +1233,23 @@ static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg, list_for_each_safe(qtd_item, qtd_tmp, &qh->qtd_list) { int i; + int qtd_desc_count; qtd = list_entry(qtd_item, struct dwc2_qtd, qtd_list_entry); xfer_done = 0; + qtd_desc_count = qtd->n_desc; - for (i = 0; i < qtd->n_desc; i++) { + for (i = 0; i < qtd_desc_count; i++) { if (dwc2_process_non_isoc_desc(hsotg, chan, chnum, qtd, desc_num, halt_status, - &xfer_done)) { - qtd = NULL; - break; - } + &xfer_done)) + goto stop_scan; + desc_num++; } } +stop_scan: if (qh->ep_type != USB_ENDPOINT_XFER_CONTROL) { /* * Resetting the data toggle for bulk and interrupt endpoints @@ -1258,7 +1257,7 @@ static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg, */ if (halt_status == DWC2_HC_XFER_STALL) qh->data_toggle = DWC2_HC_PID_DATA0; - else if (qtd) + else dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); } diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index f8253803a050..cadba8b13c48 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -525,11 +525,19 @@ void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT; if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) { + if (WARN(!chan || !chan->qh, + "chan->qh must be specified for non-control eps\n")) + return; + if (pid == TSIZ_SC_MC_PID_DATA0) chan->qh->data_toggle = DWC2_HC_PID_DATA0; else chan->qh->data_toggle = DWC2_HC_PID_DATA1; } else { + if (WARN(!qtd, + "qtd must be specified for control eps\n")) + return; + if (pid == TSIZ_SC_MC_PID_DATA0) qtd->data_toggle = DWC2_HC_PID_DATA0; else diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 29130682e547..e4f8b90d9627 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -856,7 +856,6 @@ struct dwc3 { unsigned pullups_connected:1; unsigned resize_fifos:1; unsigned setup_packet_pending:1; - unsigned start_config_issued:1; unsigned three_stage_setup:1; unsigned usb3_lpm_capable:1; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 3a9354abcb68..8d6b75c2f53b 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -555,7 +555,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) int ret; u32 reg; - dwc->start_config_issued = false; cfg = le16_to_cpu(ctrl->wValue); switch (state) { @@ -737,10 +736,6 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY"); ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); break; - case USB_REQ_SET_INTERFACE: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE"); - dwc->start_config_issued = false; - /* Fall through */ default: dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver"); ret = dwc3_ep0_delegate_req(dwc, ctrl); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7d1dd82a95ac..2363bad45af8 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -385,24 +385,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep) dep->trb_pool_dma = 0; } +static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep); + +/** + * dwc3_gadget_start_config - Configure EP resources + * @dwc: pointer to our controller context structure + * @dep: endpoint that is being enabled + * + * The assignment of transfer resources cannot perfectly follow the + * data book due to the fact that the controller driver does not have + * all knowledge of the configuration in advance. It is given this + * information piecemeal by the composite gadget framework after every + * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook + * programming model in this scenario can cause errors. For two + * reasons: + * + * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION + * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of + * multiple interfaces. + * + * 2) The databook does not mention doing more DEPXFERCFG for new + * endpoint on alt setting (8.1.6). + * + * The following simplified method is used instead: + * + * All hardware endpoints can be assigned a transfer resource and this + * setting will stay persistent until either a core reset or + * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and + * do DEPXFERCFG for every hardware endpoint as well. We are + * guaranteed that there are as many transfer resources as endpoints. + * + * This function is called for each endpoint when it is being enabled + * but is triggered only when called for EP0-out, which always happens + * first, and which should only happen in one of the above conditions. + */ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; u32 cmd; + int i; + int ret; + + if (dep->number) + return 0; memset(¶ms, 0x00, sizeof(params)); + cmd = DWC3_DEPCMD_DEPSTARTCFG; - if (dep->number != 1) { - cmd = DWC3_DEPCMD_DEPSTARTCFG; - /* XferRscIdx == 0 for ep0 and 2 for the remaining */ - if (dep->number > 1) { - if (dwc->start_config_issued) - return 0; - dwc->start_config_issued = true; - cmd |= DWC3_DEPCMD_PARAM(2); - } + ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + if (ret) + return ret; - return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { + struct dwc3_ep *dep = dwc->eps[i]; + + if (!dep) + continue; + + ret = dwc3_gadget_set_xfer_resource(dwc, dep); + if (ret) + return ret; } return 0; @@ -516,10 +558,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, struct dwc3_trb *trb_st_hw; struct dwc3_trb *trb_link; - ret = dwc3_gadget_set_xfer_resource(dwc, dep); - if (ret) - return ret; - dep->endpoint.desc = desc; dep->comp_desc = comp_desc; dep->type = usb_endpoint_type(desc); @@ -1636,8 +1674,6 @@ static int dwc3_gadget_start(struct usb_gadget *g, } dwc3_writel(dwc->regs, DWC3_DCFG, reg); - dwc->start_config_issued = false; - /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); @@ -2237,7 +2273,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc3_disconnect_gadget(dwc); - dwc->start_config_issued = false; dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->setup_packet_pending = false; @@ -2288,7 +2323,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) dwc3_stop_active_transfers(dwc); dwc3_clear_stall_all_ep(dwc); - dwc->start_config_issued = false; /* Reset device address to zero */ reg = dwc3_readl(dwc->regs, DWC3_DCFG); diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 7e179f81d05c..87fb0fd6aaab 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -130,7 +130,8 @@ struct dev_data { setup_can_stall : 1, setup_out_ready : 1, setup_out_error : 1, - setup_abort : 1; + setup_abort : 1, + gadget_registered : 1; unsigned setup_wLength; /* the rest is basically write-once */ @@ -1179,7 +1180,8 @@ dev_release (struct inode *inode, struct file *fd) /* closing ep0 === shutdown all */ - usb_gadget_unregister_driver (&gadgetfs_driver); + if (dev->gadget_registered) + usb_gadget_unregister_driver (&gadgetfs_driver); /* at this point "good" hardware has disconnected the * device from USB; the host won't see it any more. @@ -1847,6 +1849,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) * kick in after the ep0 descriptor is closed. */ value = len; + dev->gadget_registered = true; } return value; diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 53c0692f1b09..93d28cb00b76 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -2340,7 +2340,7 @@ static struct qe_udc *qe_udc_config(struct platform_device *ofdev) { struct qe_udc *udc; struct device_node *np = ofdev->dev.of_node; - unsigned int tmp_addr = 0; + unsigned long tmp_addr = 0; struct usb_device_para __iomem *usbpram; unsigned int i; u64 size; diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h index 4dff60d34f73..0d32052bf16f 100644 --- a/drivers/usb/gadget/udc/net2280.h +++ b/drivers/usb/gadget/udc/net2280.h @@ -369,9 +369,20 @@ static inline void set_max_speed(struct net2280_ep *ep, u32 max) static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80, 0x50, 0x20, 0x70, 0x40, 0x90 }; - if (ep->dev->enhanced_mode) + if (ep->dev->enhanced_mode) { reg = ep_enhanced[ep->num]; - else{ + switch (ep->dev->gadget.speed) { + case USB_SPEED_SUPER: + reg += 2; + break; + case USB_SPEED_FULL: + reg += 1; + break; + case USB_SPEED_HIGH: + default: + break; + } + } else { reg = (ep->num + 1) * 0x10; if (ep->dev->gadget.speed != USB_SPEED_HIGH) reg += 1; diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index fd73a3ea07c2..b86a6f03592e 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -413,9 +413,10 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, if (!driver->udc_name || strcmp(driver->udc_name, dev_name(&udc->dev)) == 0) { ret = udc_bind_to_driver(udc, driver); + if (ret != -EPROBE_DEFER) + list_del(&driver->pending); if (ret) goto err4; - list_del(&driver->pending); break; } } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 795a45b1b25b..58487a473521 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -662,7 +662,7 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma, csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */ } - channel->desired_mode = mode; + channel->desired_mode = *mode; musb_writew(epio, MUSB_TXCSR, csr); return 0; @@ -2003,10 +2003,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) qh->offset, urb->transfer_buffer_length); - done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, - urb, xfer_len, - iso_err); - if (done) + if (musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, urb, + xfer_len, iso_err)) goto finish; else dev_err(musb->controller, "error: rx_dma failed\n"); diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 970a30e155cb..72b387d592c2 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -757,14 +757,8 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) otg->host = host; dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n"); - /* - * Kick the state machine work, if peripheral is not supported - * or peripheral is already registered with us. - */ - if (motg->pdata->mode == USB_DR_MODE_HOST || otg->gadget) { - pm_runtime_get_sync(otg->usb_phy->dev); - schedule_work(&motg->sm_work); - } + pm_runtime_get_sync(otg->usb_phy->dev); + schedule_work(&motg->sm_work); return 0; } @@ -827,14 +821,8 @@ static int msm_otg_set_peripheral(struct usb_otg *otg, dev_dbg(otg->usb_phy->dev, "peripheral driver registered w/ tranceiver\n"); - /* - * Kick the state machine work, if host is not supported - * or host is already registered with us. - */ - if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL || otg->host) { - pm_runtime_get_sync(otg->usb_phy->dev); - schedule_work(&motg->sm_work); - } + pm_runtime_get_sync(otg->usb_phy->dev); + schedule_work(&motg->sm_work); return 0; } |