summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-02-19 10:36:45 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-02-19 10:36:45 -0800
commitb11a2783974791d37e44abbb48d41e8c120b5126 (patch)
tree5e0cb2b934a01ce7e3fb78614b578b188b840134 /drivers
parent773433433791b9420c2a0f86b93c91d4115d89b5 (diff)
parentb6a2ab2cd4739a9573ed41677e53171987b8da34 (diff)
downloadlinux-b11a2783974791d37e44abbb48d41e8c120b5126.tar.bz2
Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
Diffstat (limited to 'drivers')
-rw-r--r--drivers/connector/Kconfig2
-rw-r--r--drivers/hwmon/Kconfig2
-rw-r--r--drivers/hwmon/pmbus/Kconfig2
-rw-r--r--drivers/i2c/Kconfig4
-rw-r--r--drivers/iio/Kconfig4
-rw-r--r--drivers/isdn/hardware/mISDN/Kconfig2
-rw-r--r--drivers/md/Kconfig4
-rw-r--r--drivers/md/persistent-data/Kconfig2
-rw-r--r--drivers/net/ethernet/ti/Kconfig4
-rw-r--r--drivers/net/usb/Kconfig12
-rw-r--r--drivers/net/wireless/rt2x00/Kconfig6
-rw-r--r--drivers/pci/pcie/aer/Kconfig2
-rw-r--r--drivers/rtc/Kconfig8
-rw-r--r--drivers/spi/Kconfig6
-rw-r--r--drivers/staging/board/Kconfig2
-rw-r--r--drivers/staging/emxx_udc/Kconfig2
-rw-r--r--drivers/staging/iio/Kconfig4
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/usb/gadget/Kconfig34
-rw-r--r--drivers/usb/gadget/legacy/Kconfig2
-rw-r--r--drivers/usb/gadget/udc/Kconfig4
-rw-r--r--drivers/usb/phy/Kconfig2
22 files changed, 56 insertions, 56 deletions
diff --git a/drivers/connector/Kconfig b/drivers/connector/Kconfig
index 6e6730f9dfd1..3de5f3a9a104 100644
--- a/drivers/connector/Kconfig
+++ b/drivers/connector/Kconfig
@@ -12,7 +12,7 @@ menuconfig CONNECTOR
if CONNECTOR
config PROC_EVENTS
- boolean "Report process events to userspace"
+ bool "Report process events to userspace"
depends on CONNECTOR=y
default y
---help---
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d931cbbed240..110fade9cb74 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1606,7 +1606,7 @@ config SENSORS_W83795
will be called w83795.
config SENSORS_W83795_FANCTRL
- boolean "Include automatic fan control support (DANGEROUS)"
+ bool "Include automatic fan control support (DANGEROUS)"
depends on SENSORS_W83795
default n
help
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a674cd83a4e2..9f7dbd189c97 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -57,7 +57,7 @@ config SENSORS_LTC2978
be called ltc2978.
config SENSORS_LTC2978_REGULATOR
- boolean "Regulator support for LTC2978 and compatibles"
+ bool "Regulator support for LTC2978 and compatibles"
depends on SENSORS_LTC2978 && REGULATOR
help
If you say yes here you get regulator support for Linear
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 8c9e619f3026..78fbee463628 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -35,11 +35,11 @@ config ACPI_I2C_OPREGION
if I2C
config I2C_BOARDINFO
- boolean
+ bool
default y
config I2C_COMPAT
- boolean "Enable compatibility bits for old user-space"
+ bool "Enable compatibility bits for old user-space"
default y
help
Say Y here if you intend to run lm-sensors 3.1.1 or older, or any
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 4132935dc929..4011effe4c05 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -21,7 +21,7 @@ config IIO_BUFFER
if IIO_BUFFER
config IIO_BUFFER_CB
-boolean "IIO callback buffer used for push in-kernel interfaces"
+ bool "IIO callback buffer used for push in-kernel interfaces"
help
Should be selected by any drivers that do in-kernel push
usage. That is, those where the data is pushed to the consumer.
@@ -43,7 +43,7 @@ config IIO_TRIGGERED_BUFFER
endif # IIO_BUFFER
config IIO_TRIGGER
- boolean "Enable triggered sampling support"
+ bool "Enable triggered sampling support"
help
Provides IIO core support for triggers. Currently these
are used to initialize capture of samples to push into
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig
index b8611e3e5e74..09df54fc1fef 100644
--- a/drivers/isdn/hardware/mISDN/Kconfig
+++ b/drivers/isdn/hardware/mISDN/Kconfig
@@ -24,7 +24,7 @@ config MISDN_HFCMULTI
* HFC-E1 (E1 interface for 2Mbit ISDN)
config MISDN_HFCMULTI_8xx
- boolean "Support for XHFC embedded board in HFC multiport driver"
+ bool "Support for XHFC embedded board in HFC multiport driver"
depends on MISDN
depends on MISDN_HFCMULTI
depends on 8xx
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index c39644478aa4..63e05e32b462 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -178,7 +178,7 @@ config MD_FAULTY
source "drivers/md/bcache/Kconfig"
config BLK_DEV_DM_BUILTIN
- boolean
+ bool
config BLK_DEV_DM
tristate "Device mapper support"
@@ -197,7 +197,7 @@ config BLK_DEV_DM
If unsure, say N.
config DM_DEBUG
- boolean "Device mapper debugging support"
+ bool "Device mapper debugging support"
depends on BLK_DEV_DM
---help---
Enable this for messages that may help debug device-mapper problems.
diff --git a/drivers/md/persistent-data/Kconfig b/drivers/md/persistent-data/Kconfig
index 0c2dec7aec20..78c74bb71ba4 100644
--- a/drivers/md/persistent-data/Kconfig
+++ b/drivers/md/persistent-data/Kconfig
@@ -8,7 +8,7 @@ config DM_PERSISTENT_DATA
device-mapper targets such as the thin provisioning target.
config DM_DEBUG_BLOCK_STACK_TRACING
- boolean "Keep stack trace of persistent data block lock holders"
+ bool "Keep stack trace of persistent data block lock holders"
depends on STACKTRACE_SUPPORT && DM_PERSISTENT_DATA
select STACKTRACE
---help---
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 3bc992cd70b7..f6a71092e135 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -50,7 +50,7 @@ config TI_DAVINCI_CPDMA
will be called davinci_cpdma. This is recommended.
config TI_CPSW_PHY_SEL
- boolean "TI CPSW Switch Phy sel Support"
+ bool "TI CPSW Switch Phy sel Support"
depends on TI_CPSW
---help---
This driver supports configuring of the phy mode connected to
@@ -77,7 +77,7 @@ config TI_CPSW
will be called cpsw.
config TI_CPTS
- boolean "TI Common Platform Time Sync (CPTS) Support"
+ bool "TI Common Platform Time Sync (CPTS) Support"
depends on TI_CPSW
select PTP_1588_CLOCK
---help---
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 37eed4d84e9c..3bd9678315ad 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -397,14 +397,14 @@ config USB_NET_CDC_SUBSET
not generally have permanently assigned Ethernet addresses.
config USB_ALI_M5632
- boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
+ bool "ALi M5632 based 'USB 2.0 Data Link' cables"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
based on this design, which supports USB 2.0 high speed.
config USB_AN2720
- boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+ bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
@@ -412,7 +412,7 @@ config USB_AN2720
Cypress brand.
config USB_BELKIN
- boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
+ bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
depends on USB_NET_CDC_SUBSET
default y
help
@@ -421,7 +421,7 @@ config USB_BELKIN
microcontroller, with LEDs that indicate traffic.
config USB_ARMLINUX
- boolean "Embedded ARM Linux links (iPaq, ...)"
+ bool "Embedded ARM Linux links (iPaq, ...)"
depends on USB_NET_CDC_SUBSET
default y
help
@@ -438,14 +438,14 @@ config USB_ARMLINUX
this simpler protocol by installing a different kernel.
config USB_EPSON2888
- boolean "Epson 2888 based firmware (DEVELOPMENT)"
+ bool "Epson 2888 based firmware (DEVELOPMENT)"
depends on USB_NET_CDC_SUBSET
help
Choose this option to support the usb networking links used
by some sample firmware from Epson.
config USB_KC2190
- boolean "KT Technology KC2190 based cables (InstaNet)"
+ bool "KT Technology KC2190 based cables (InstaNet)"
depends on USB_NET_CDC_SUBSET
help
Choose this option if you're using a host-to-host cable
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 006b8bcb2e31..2b4ef256c6b9 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -243,14 +243,14 @@ config RT2X00_LIB
select AVERAGE
config RT2X00_LIB_FIRMWARE
- boolean
+ bool
select FW_LOADER
config RT2X00_LIB_CRYPTO
- boolean
+ bool
config RT2X00_LIB_LEDS
- boolean
+ bool
default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
config RT2X00_LIB_DEBUGFS
diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
index 389440228c1d..7d1437b01fdd 100644
--- a/drivers/pci/pcie/aer/Kconfig
+++ b/drivers/pci/pcie/aer/Kconfig
@@ -3,7 +3,7 @@
#
config PCIEAER
- boolean "Root Port Advanced Error Reporting support"
+ bool "Root Port Advanced Error Reporting support"
depends on PCIEPORTBUS
select RAS
default y
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cedb41c95dae..b5b5c3d485d6 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -65,7 +65,7 @@ config RTC_DEBUG
comment "RTC interfaces"
config RTC_INTF_SYSFS
- boolean "/sys/class/rtc/rtcN (sysfs)"
+ bool "/sys/class/rtc/rtcN (sysfs)"
depends on SYSFS
default RTC_CLASS
help
@@ -75,7 +75,7 @@ config RTC_INTF_SYSFS
If unsure, say Y.
config RTC_INTF_PROC
- boolean "/proc/driver/rtc (procfs for rtcN)"
+ bool "/proc/driver/rtc (procfs for rtcN)"
depends on PROC_FS
default RTC_CLASS
help
@@ -88,7 +88,7 @@ config RTC_INTF_PROC
If unsure, say Y.
config RTC_INTF_DEV
- boolean "/dev/rtcN (character devices)"
+ bool "/dev/rtcN (character devices)"
default RTC_CLASS
help
Say yes here if you want to use your RTCs using the /dev
@@ -466,7 +466,7 @@ config RTC_DRV_DM355EVM
Supports the RTC firmware in the MSP430 on the DM355 EVM.
config RTC_DRV_TWL92330
- boolean "TI TWL92330/Menelaus"
+ bool "TI TWL92330/Menelaus"
depends on MENELAUS
help
If you say yes here you get support for the RTC on the
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 95ccedabba4f..ab8dfbef6f1b 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -29,7 +29,7 @@ menuconfig SPI
if SPI
config SPI_DEBUG
- boolean "Debug support for SPI drivers"
+ bool "Debug support for SPI drivers"
depends on DEBUG_KERNEL
help
Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
@@ -40,8 +40,8 @@ config SPI_DEBUG
#
config SPI_MASTER
-# boolean "SPI Master Support"
- boolean
+# bool "SPI Master Support"
+ bool
default SPI
help
If your system has an master-capable SPI controller (which
diff --git a/drivers/staging/board/Kconfig b/drivers/staging/board/Kconfig
index 7eda0b8b7aab..0a89ad16371f 100644
--- a/drivers/staging/board/Kconfig
+++ b/drivers/staging/board/Kconfig
@@ -1,5 +1,5 @@
config STAGING_BOARD
- boolean "Staging Board Support"
+ bool "Staging Board Support"
depends on OF_ADDRESS
depends on BROKEN
help
diff --git a/drivers/staging/emxx_udc/Kconfig b/drivers/staging/emxx_udc/Kconfig
index 9bc6d3db86d9..cc3402020487 100644
--- a/drivers/staging/emxx_udc/Kconfig
+++ b/drivers/staging/emxx_udc/Kconfig
@@ -1,5 +1,5 @@
config USB_EMXX
- boolean "EMXX USB Function Device Controller"
+ bool "EMXX USB Function Device Controller"
depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST))
help
The Emma Mobile series of SoCs from Renesas Electronics and
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index fa38be0982f9..24183028bd71 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -30,13 +30,13 @@ config IIO_SIMPLE_DUMMY
if IIO_SIMPLE_DUMMY
config IIO_SIMPLE_DUMMY_EVENTS
- boolean "Event generation support"
+ bool "Event generation support"
select IIO_DUMMY_EVGEN
help
Add some dummy events to the simple dummy driver.
config IIO_SIMPLE_DUMMY_BUFFER
- boolean "Buffered capture support"
+ bool "Buffered capture support"
select IIO_BUFFER
select IIO_KFIFO_BUF
help
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5d916c7a216b..d2501f01cd03 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -489,7 +489,7 @@ config SERIAL_MFD_HSU
select SERIAL_CORE
config SERIAL_MFD_HSU_CONSOLE
- boolean "Medfile HSU serial console support"
+ bool "Medfile HSU serial console support"
depends on SERIAL_MFD_HSU=y
select SERIAL_CORE_CONSOLE
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 96539038c03a..b454d05be583 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -45,7 +45,7 @@ menuconfig USB_GADGET
if USB_GADGET
config USB_GADGET_DEBUG
- boolean "Debugging messages (DEVELOPMENT)"
+ bool "Debugging messages (DEVELOPMENT)"
depends on DEBUG_KERNEL
help
Many controller and gadget drivers will print some debugging
@@ -73,7 +73,7 @@ config USB_GADGET_VERBOSE
production build.
config USB_GADGET_DEBUG_FILES
- boolean "Debugging information files (DEVELOPMENT)"
+ bool "Debugging information files (DEVELOPMENT)"
depends on PROC_FS
help
Some of the drivers in the "gadget" framework can expose
@@ -84,7 +84,7 @@ config USB_GADGET_DEBUG_FILES
here. If in doubt, or to conserve kernel memory, say "N".
config USB_GADGET_DEBUG_FS
- boolean "Debugging information files in debugfs (DEVELOPMENT)"
+ bool "Debugging information files in debugfs (DEVELOPMENT)"
depends on DEBUG_FS
help
Some of the drivers in the "gadget" framework can expose
@@ -230,7 +230,7 @@ config USB_CONFIGFS
For more information see Documentation/usb/gadget_configfs.txt.
config USB_CONFIGFS_SERIAL
- boolean "Generic serial bulk in/out"
+ bool "Generic serial bulk in/out"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
@@ -239,7 +239,7 @@ config USB_CONFIGFS_SERIAL
The function talks to the Linux-USB generic serial driver.
config USB_CONFIGFS_ACM
- boolean "Abstract Control Model (CDC ACM)"
+ bool "Abstract Control Model (CDC ACM)"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
@@ -249,7 +249,7 @@ config USB_CONFIGFS_ACM
MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
config USB_CONFIGFS_OBEX
- boolean "Object Exchange Model (CDC OBEX)"
+ bool "Object Exchange Model (CDC OBEX)"
depends on USB_CONFIGFS
depends on TTY
select USB_U_SERIAL
@@ -259,7 +259,7 @@ config USB_CONFIGFS_OBEX
since the kernel itself doesn't implement the OBEX protocol.
config USB_CONFIGFS_NCM
- boolean "Network Control Model (CDC NCM)"
+ bool "Network Control Model (CDC NCM)"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
@@ -270,7 +270,7 @@ config USB_CONFIGFS_NCM
different alignment possibilities.
config USB_CONFIGFS_ECM
- boolean "Ethernet Control Model (CDC ECM)"
+ bool "Ethernet Control Model (CDC ECM)"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
@@ -282,7 +282,7 @@ config USB_CONFIGFS_ECM
supported by firmware for smart network devices.
config USB_CONFIGFS_ECM_SUBSET
- boolean "Ethernet Control Model (CDC ECM) subset"
+ bool "Ethernet Control Model (CDC ECM) subset"
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
@@ -323,7 +323,7 @@ config USB_CONFIGFS_EEM
the host is the same (a usbX device), so the differences are minimal.
config USB_CONFIGFS_PHONET
- boolean "Phonet protocol"
+ bool "Phonet protocol"
depends on USB_CONFIGFS
depends on NET
depends on PHONET
@@ -333,7 +333,7 @@ config USB_CONFIGFS_PHONET
The Phonet protocol implementation for USB device.
config USB_CONFIGFS_MASS_STORAGE
- boolean "Mass storage"
+ bool "Mass storage"
depends on USB_CONFIGFS
depends on BLOCK
select USB_F_MASS_STORAGE
@@ -344,7 +344,7 @@ config USB_CONFIGFS_MASS_STORAGE
specified as a module parameter or sysfs option.
config USB_CONFIGFS_F_LB_SS
- boolean "Loopback and sourcesink function (for testing)"
+ bool "Loopback and sourcesink function (for testing)"
depends on USB_CONFIGFS
select USB_F_SS_LB
help
@@ -357,7 +357,7 @@ config USB_CONFIGFS_F_LB_SS
and its driver through a basic set of functional tests.
config USB_CONFIGFS_F_FS
- boolean "Function filesystem (FunctionFS)"
+ bool "Function filesystem (FunctionFS)"
depends on USB_CONFIGFS
select USB_F_FS
help
@@ -369,7 +369,7 @@ config USB_CONFIGFS_F_FS
mass storage) and other are implemented in user space.
config USB_CONFIGFS_F_UAC1
- boolean "Audio Class 1.0"
+ bool "Audio Class 1.0"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
@@ -382,7 +382,7 @@ config USB_CONFIGFS_F_UAC1
on the device.
config USB_CONFIGFS_F_UAC2
- boolean "Audio Class 2.0"
+ bool "Audio Class 2.0"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
@@ -400,7 +400,7 @@ config USB_CONFIGFS_F_UAC2
wants as audio data to the USB Host.
config USB_CONFIGFS_F_MIDI
- boolean "MIDI function"
+ bool "MIDI function"
depends on USB_CONFIGFS
depends on SND
select USB_LIBCOMPOSITE
@@ -414,7 +414,7 @@ config USB_CONFIGFS_F_MIDI
ALSA's aconnect utility etc.
config USB_CONFIGFS_F_HID
- boolean "HID function"
+ bool "HID function"
depends on USB_CONFIGFS
select USB_F_HID
help
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index fd48ef3af4eb..113c87e22117 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -40,7 +40,7 @@ config USB_ZERO
dynamically linked module called "g_zero".
config USB_ZERO_HNPTEST
- boolean "HNP Test Device"
+ bool "HNP Test Device"
depends on USB_ZERO && USB_OTG
help
You can configure this device to enumerate using the device
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 366e551aeff0..9a3a6b00391a 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -199,7 +199,7 @@ config USB_S3C2410
S3C2440 processors.
config USB_S3C2410_DEBUG
- boolean "S3C2410 udc debug messages"
+ bool "S3C2410 udc debug messages"
depends on USB_S3C2410
config USB_S3C_HSUDC
@@ -288,7 +288,7 @@ config USB_NET2272
gadget drivers to also be dynamically linked.
config USB_NET2272_DMA
- boolean "Support external DMA controller"
+ bool "Support external DMA controller"
depends on USB_NET2272 && HAS_DMA
help
The NET2272 part can optionally support an external DMA
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c6d0c8e745b9..52d3d58252e1 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -119,7 +119,7 @@ config TAHVO_USB
config TAHVO_USB_HOST_BY_DEFAULT
depends on TAHVO_USB
- boolean "Device in USB host mode by default"
+ bool "Device in USB host mode by default"
help
Say Y here, if you want the device to enter USB host mode
by default on bootup.