summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2013-06-12 13:35:24 -0700
committerDavid S. Miller <davem@davemloft.net>2013-06-12 13:35:24 -0700
commit090adb893137ff3c672a644413edc174b0a75706 (patch)
tree8cbd8cebe7420f3bcee87e3be0421aed215db450 /drivers
parentb79462a8b9f9a452edc20c64a70a89ba3b0a6a88 (diff)
parent42d887a68013b0a04f7b8ebfa4999a8d5df6775c (diff)
downloadlinux-090adb893137ff3c672a644413edc174b0a75706.tar.bz2
Merge branch 'wireless'
John W. Linville says: ==================== For now I have dropped the mac80211 tree from this request. We are developing a little backlog of fixes and I would like to avoid introducing any more uncertainty to this pull request for the 3.10 stream. All the other bits are the same as what was in the 2013-06-06 request, including the ath9k fixes intended to address the problems observed by Linus w/ his Pixel, and a CVE fix for a potential security issue in the b43 driver. Regarding the wl12xx bits, Luca says: "Here are three patches that I'd like to get into 3.10. Two of them, by me, are related to the firmware version checks in our driver. Without them, the firmwares fail to load. The other one, by Eliad, fixes a typo bug in our 5GHz scanning code." And as for the Bluetooth bits, Gustavo says: "The following patches are important bug fixes for 3.10, plus the support for a new device. We do have three fixes from Johan. The first one is a fix to avoid LE-only devices to rely on the (inexistent) extended features data. The second patch fixes length checks on incoming L2CAP signalling PDUs so we can discard PDU whose size doesn't match the one reported in the header. The last one fixes the handling of power on failures, we now report proper errors to mgmt when hci_dev_open()." Along with that... Larry Finger corrects an rtlwifi problem that caused some devices to refuse to connect to non-WPA2 networks if the device had previously assocated with a WPA2 network. He also adds a one-line fix to prevent false reports from kmemleak. Mark A. Greer fixes an out of bounds array access in mwifiex. Felix Fietkau reverts an earlier ath9k initval patch that reduced rx sensitivity in a number of ath9k devices with no corresponding benefit. Kees Cook fixes a potential uid-0 to ring-0 escalation in b43 (CVE-2013-2852). Sujith Manoharan turns-off powersave mode by default for ath9k, and also defaults ath9k to use the minstrel_ht rate control algorithm. Both of these are believed to contribute to greater stability/usability of ath9k in real-world situations. Yijing Wang fixes an iwlegacy build error for il_pm_ops if CONFIG_PM is set but CONFIG_PM_SLEEP is not set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/bluetooth/Kconfig4
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c28
-rw-r--r--drivers/net/wireless/ath/ath9k/Kconfig10
-rw-r--r--drivers/net/wireless/ath/ath9k/Makefile2
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h10
-rw-r--r--drivers/net/wireless/ath/ath9k/init.c7
-rw-r--r--drivers/net/wireless/ath/ath9k/rc.h2
-rw-r--r--drivers/net/wireless/b43/main.c2
-rw-r--r--drivers/net/wireless/iwlegacy/common.h6
-rw-r--r--drivers/net/wireless/mwifiex/debugfs.c22
-rw-r--r--drivers/net/wireless/rtlwifi/pci.c1
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/hw.c134
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/hw.h4
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/mac.c18
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/sw.c4
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/sw.h3
-rw-r--r--drivers/net/wireless/rtlwifi/usb.c13
-rw-r--r--drivers/net/wireless/rtlwifi/wifi.h4
-rw-r--r--drivers/net/wireless/ti/wl12xx/scan.c2
-rw-r--r--drivers/net/wireless/ti/wl12xx/wl12xx.h6
-rw-r--r--drivers/net/wireless/ti/wl18xx/scan.c2
21 files changed, 211 insertions, 73 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index fdfd61a2d523..11a6104a1e4f 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -201,7 +201,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
- Marvell Bluetooth devices, such as 8688/8787/8797.
+ Marvell Bluetooth devices, such as 8688/8787/8797/8897.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -214,7 +214,7 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
- devices with SDIO interface. Currently SD8688/SD8787/SD8797
+ devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8897
chipsets are supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index c63488c54f4a..13693b7a0d5c 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -82,6 +82,23 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
.io_port_2 = 0x7a,
};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
+ .cfg = 0x00,
+ .host_int_mask = 0x02,
+ .host_intstatus = 0x03,
+ .card_status = 0x50,
+ .sq_read_base_addr_a0 = 0x60,
+ .sq_read_base_addr_a1 = 0x61,
+ .card_revision = 0xbc,
+ .card_fw_status0 = 0xc0,
+ .card_fw_status1 = 0xc1,
+ .card_rx_len = 0xc2,
+ .card_rx_unit = 0xc3,
+ .io_port_0 = 0xd8,
+ .io_port_1 = 0xd9,
+ .io_port_2 = 0xda,
+};
+
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
@@ -103,6 +120,13 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
.sd_blksz_fw_dl = 256,
};
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
+ .helper = NULL,
+ .firmware = "mrvl/sd8897_uapsta.bin",
+ .reg = &btmrvl_reg_88xx,
+ .sd_blksz_fw_dl = 256,
+};
+
static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8688 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
@@ -116,6 +140,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8797 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
+ /* Marvell SD8897 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912E),
+ .driver_data = (unsigned long) &btmrvl_sdio_sd8897 },
{ } /* Terminating entry */
};
@@ -1194,3 +1221,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
MODULE_FIRMWARE("mrvl/sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index f3dc124c60c7..3c2cbc9d6295 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -92,13 +92,17 @@ config ATH9K_MAC_DEBUG
This option enables collection of statistics for Rx/Tx status
data and some other MAC related statistics
-config ATH9K_RATE_CONTROL
+config ATH9K_LEGACY_RATE_CONTROL
bool "Atheros ath9k rate control"
depends on ATH9K
- default y
+ default n
---help---
Say Y, if you want to use the ath9k specific rate control
- module instead of minstrel_ht.
+ module instead of minstrel_ht. Be warned that there are various
+ issues with the ath9k RC and minstrel is a more robust algorithm.
+ Note that even if this option is selected, "ath9k_rate_control"
+ has to be passed to mac80211 using the module parameter,
+ ieee80211_default_rc_algo.
config ATH9K_HTC
tristate "Atheros HTC based wireless cards support"
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 2ad8f9474ba1..75ee9e7704ce 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -8,7 +8,7 @@ ath9k-y += beacon.o \
antenna.o
ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
-ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o
+ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
ath9k-$(CONFIG_ATH9K_PCI) += pci.o
ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index db5ffada2217..7546b9a7dcbf 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -958,11 +958,11 @@ static const u32 ar9300Common_rx_gain_table_2p2[][2] = {
{0x0000a074, 0x00000000},
{0x0000a078, 0x00000000},
{0x0000a07c, 0x00000000},
- {0x0000a080, 0x1a1a1a1a},
- {0x0000a084, 0x1a1a1a1a},
- {0x0000a088, 0x1a1a1a1a},
- {0x0000a08c, 0x1a1a1a1a},
- {0x0000a090, 0x171a1a1a},
+ {0x0000a080, 0x22222229},
+ {0x0000a084, 0x1d1d1d1d},
+ {0x0000a088, 0x1d1d1d1d},
+ {0x0000a08c, 0x1d1d1d1d},
+ {0x0000a090, 0x171d1d1d},
{0x0000a094, 0x11111717},
{0x0000a098, 0x00030311},
{0x0000a09c, 0x00000000},
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index aba415103f94..2ba494567777 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -787,8 +787,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->wiphy->iface_combinations = if_comb;
hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
- if (AR_SREV_5416(sc->sc_ah))
- hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+ hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
@@ -830,10 +829,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
sc->ant_rx = hw->wiphy->available_antennas_rx;
sc->ant_tx = hw->wiphy->available_antennas_tx;
-#ifdef CONFIG_ATH9K_RATE_CONTROL
- hw->rate_control_algorithm = "ath9k_rate_control";
-#endif
-
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&sc->sbands[IEEE80211_BAND_2GHZ];
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index 267dbfcfaa96..b9a87383cb43 100644
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -231,7 +231,7 @@ static inline void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix,
}
#endif
-#ifdef CONFIG_ATH9K_RATE_CONTROL
+#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL
int ath_rate_control_register(void);
void ath_rate_control_unregister(void);
#else
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 6dd07e2ec595..a95b77ab360e 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2458,7 +2458,7 @@ static void b43_request_firmware(struct work_struct *work)
for (i = 0; i < B43_NR_FWTYPES; i++) {
errmsg = ctx->errors[i];
if (strlen(errmsg))
- b43err(dev->wl, errmsg);
+ b43err(dev->wl, "%s", errmsg);
}
b43_print_fw_helptext(dev->wl, 1);
goto out;
diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index f8246f2d88f9..4caaf52986a4 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -1832,16 +1832,16 @@ u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval);
__le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon,
u32 beacon_interval);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
extern const struct dev_pm_ops il_pm_ops;
#define IL_LEGACY_PM_OPS (&il_pm_ops)
-#else /* !CONFIG_PM */
+#else /* !CONFIG_PM_SLEEP */
#define IL_LEGACY_PM_OPS NULL
-#endif /* !CONFIG_PM */
+#endif /* !CONFIG_PM_SLEEP */
/*****************************************************
* Error Handling Debugging
diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c
index 753b5682d53f..a5f9875cfd6e 100644
--- a/drivers/net/wireless/mwifiex/debugfs.c
+++ b/drivers/net/wireless/mwifiex/debugfs.c
@@ -26,10 +26,17 @@
static struct dentry *mwifiex_dfs_dir;
static char *bss_modes[] = {
- "Unknown",
- "Ad-hoc",
- "Managed",
- "Auto"
+ "UNSPECIFIED",
+ "ADHOC",
+ "STATION",
+ "AP",
+ "AP_VLAN",
+ "WDS",
+ "MONITOR",
+ "MESH_POINT",
+ "P2P_CLIENT",
+ "P2P_GO",
+ "P2P_DEVICE",
};
/* size/addr for mwifiex_debug_info */
@@ -200,7 +207,12 @@ mwifiex_info_read(struct file *file, char __user *ubuf,
p += sprintf(p, "driver_version = %s", fmt);
p += sprintf(p, "\nverext = %s", priv->version_str);
p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name);
- p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
+
+ if (info.bss_mode >= ARRAY_SIZE(bss_modes))
+ p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode);
+ else
+ p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]);
+
p += sprintf(p, "media_state=\"%s\"\n",
(!priv->media_connected ? "Disconnected" : "Connected"));
p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 999ffc12578b..c97e9d327331 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -764,6 +764,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
"can't alloc skb for rx\n");
goto done;
}
+ kmemleak_not_leak(new_skb);
pci_unmap_single(rtlpci->pdev,
*((dma_addr_t *) skb->cb),
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 3d0498e69c8c..189ba124a8c6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1973,26 +1973,35 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
}
}
-void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta,
- u8 rssi_level)
+static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 ratr_value = (u32) mac->basic_rates;
- u8 *mcsrate = mac->mcs;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ u32 ratr_value;
u8 ratr_index = 0;
u8 nmode = mac->ht_enable;
- u8 mimo_ps = 1;
- u16 shortgi_rate = 0;
- u32 tmp_ratr_value = 0;
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+ u16 shortgi_rate;
+ u32 tmp_ratr_value;
u8 curtxbw_40mhz = mac->bw_40;
- u8 curshortgi_40mhz = mac->sgi_40;
- u8 curshortgi_20mhz = mac->sgi_20;
+ u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
enum wireless_mode wirelessmode = mac->mode;
- ratr_value |= ((*(u16 *) (mcsrate))) << 12;
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_value = sta->supp_rates[1] << 4;
+ else
+ ratr_value = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_value = 0xfff;
+
+ ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
if (ratr_value & 0x0000000c)
@@ -2006,7 +2015,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
nmode = 1;
- if (mimo_ps == 0) {
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
ratr_value &= 0x0007F005;
} else {
u32 ratr_mask;
@@ -2016,8 +2025,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
ratr_mask = 0x000ff005;
else
ratr_mask = 0x0f0ff005;
- if (curtxbw_40mhz)
- ratr_mask |= 0x00000010;
+
ratr_value &= ratr_mask;
}
break;
@@ -2026,41 +2034,74 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
ratr_value &= 0x000ff0ff;
else
ratr_value &= 0x0f0ff0ff;
+
break;
}
+
ratr_value &= 0x0FFFFFFF;
- if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
- (!curtxbw_40mhz && curshortgi_20mhz))) {
+
+ if (nmode && ((curtxbw_40mhz &&
+ curshortgi_40mhz) || (!curtxbw_40mhz &&
+ curshortgi_20mhz))) {
+
ratr_value |= 0x10000000;
tmp_ratr_value = (ratr_value >> 12);
+
for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
if ((1 << shortgi_rate) & tmp_ratr_value)
break;
}
+
shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
- (shortgi_rate << 4) | (shortgi_rate);
+ (shortgi_rate << 4) | (shortgi_rate);
}
+
rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
+ rtl_read_dword(rtlpriv, REG_ARFR0));
}
-void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
+static void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 ratr_bitmap = (u32) mac->basic_rates;
- u8 *p_mcsrate = mac->mcs;
- u8 ratr_index = 0;
- u8 curtxbw_40mhz = mac->bw_40;
- u8 curshortgi_40mhz = mac->sgi_40;
- u8 curshortgi_20mhz = mac->sgi_20;
- enum wireless_mode wirelessmode = mac->mode;
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_sta_info *sta_entry = NULL;
+ u32 ratr_bitmap;
+ u8 ratr_index;
+ u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0;
+ u8 curshortgi_40mhz = curtxbw_40mhz &&
+ (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
+ 1 : 0;
+ u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
+ 1 : 0;
+ enum wireless_mode wirelessmode = 0;
bool shortgi = false;
u8 rate_mask[5];
u8 macid = 0;
- u8 mimops = 1;
-
- ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12);
+ u8 mimo_ps = IEEE80211_SMPS_OFF;
+
+ sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+ wirelessmode = sta_entry->wireless_mode;
+ if (mac->opmode == NL80211_IFTYPE_STATION ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT)
+ curtxbw_40mhz = mac->bw_40;
+ else if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_ADHOC)
+ macid = sta->aid + 1;
+
+ if (rtlhal->current_bandtype == BAND_ON_5G)
+ ratr_bitmap = sta->supp_rates[1] << 4;
+ else
+ ratr_bitmap = sta->supp_rates[0];
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ ratr_bitmap = 0xfff;
+ ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
+ sta->ht_cap.mcs.rx_mask[0] << 12);
switch (wirelessmode) {
case WIRELESS_MODE_B:
ratr_index = RATR_INX_WIRELESS_B;
@@ -2071,6 +2112,7 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
break;
case WIRELESS_MODE_G:
ratr_index = RATR_INX_WIRELESS_GB;
+
if (rssi_level == 1)
ratr_bitmap &= 0x00000f00;
else if (rssi_level == 2)
@@ -2085,7 +2127,8 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
case WIRELESS_MODE_N_24G:
case WIRELESS_MODE_N_5G:
ratr_index = RATR_INX_WIRELESS_NGB;
- if (mimops == 0) {
+
+ if (mimo_ps == IEEE80211_SMPS_STATIC) {
if (rssi_level == 1)
ratr_bitmap &= 0x00070000;
else if (rssi_level == 2)
@@ -2128,8 +2171,10 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
}
}
}
+
if ((curtxbw_40mhz && curshortgi_40mhz) ||
(!curtxbw_40mhz && curshortgi_20mhz)) {
+
if (macid == 0)
shortgi = true;
else if (macid == 1)
@@ -2138,21 +2183,42 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
break;
default:
ratr_index = RATR_INX_WIRELESS_NGB;
+
if (rtlphy->rf_type == RF_1T2R)
ratr_bitmap &= 0x000ff0ff;
else
ratr_bitmap &= 0x0f0ff0ff;
break;
}
- RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "ratr_bitmap :%x\n",
- ratr_bitmap);
- *(u32 *)&rate_mask = ((ratr_bitmap & 0x0fffffff) |
- ratr_index << 28);
+ sta_entry->ratr_index = ratr_index;
+
+ RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+ "ratr_bitmap :%x\n", ratr_bitmap);
+ *(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) |
+ (ratr_index << 28);
rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
"Rate_index:%x, ratr_val:%x, %5phC\n",
ratr_index, ratr_bitmap, rate_mask);
- rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
+ memcpy(rtlpriv->rate_mask, rate_mask, 5);
+ /* rtl92c_fill_h2c_cmd() does USB I/O and will result in a
+ * "scheduled while atomic" if called directly */
+ schedule_work(&rtlpriv->works.fill_h2c_cmd);
+
+ if (macid != 0)
+ sta_entry->ratr_index = ratr_index;
+}
+
+void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ if (rtlpriv->dm.useramask)
+ rtl92cu_update_hal_rate_mask(hw, sta, rssi_level);
+ else
+ rtl92cu_update_hal_rate_table(hw, sta);
}
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
index f41a3aa4a26f..8e3ec1e25644 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
@@ -98,10 +98,6 @@ void rtl92cu_update_interrupt_mask(struct ieee80211_hw *hw,
u32 add_msr, u32 rm_msr);
void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
-void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw,
- struct ieee80211_sta *sta,
- u8 rssi_level);
-void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level);
void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw);
bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
index 85b6bdb163c0..da4f587199ee 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
@@ -289,14 +289,30 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
macaddr = cam_const_broad;
entry_id = key_index;
} else {
+ if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT) {
+ entry_id = rtl_cam_get_free_entry(hw,
+ p_macaddr);
+ if (entry_id >= TOTAL_CAM_ENTRY) {
+ RT_TRACE(rtlpriv, COMP_SEC,
+ DBG_EMERG,
+ "Can not find free hw security cam entry\n");
+ return;
+ }
+ } else {
+ entry_id = CAM_PAIRWISE_KEY_POSITION;
+ }
+
key_index = PAIRWISE_KEYIDX;
- entry_id = CAM_PAIRWISE_KEY_POSITION;
is_pairwise = true;
}
}
if (rtlpriv->sec.key_len[key_index] == 0) {
RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
"delete one entry\n");
+ if (mac->opmode == NL80211_IFTYPE_AP ||
+ mac->opmode == NL80211_IFTYPE_MESH_POINT)
+ rtl_cam_del_entry(hw, p_macaddr);
rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
} else {
RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 938b1e670b93..826f085c29dd 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -106,8 +106,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = {
.update_interrupt_mask = rtl92cu_update_interrupt_mask,
.get_hw_reg = rtl92cu_get_hw_reg,
.set_hw_reg = rtl92cu_set_hw_reg,
- .update_rate_tbl = rtl92cu_update_hal_rate_table,
- .update_rate_mask = rtl92cu_update_hal_rate_mask,
+ .update_rate_tbl = rtl92cu_update_hal_rate_tbl,
.fill_tx_desc = rtl92cu_tx_fill_desc,
.fill_fake_txdesc = rtl92cu_fill_fake_txdesc,
.fill_tx_cmddesc = rtl92cu_tx_fill_cmddesc,
@@ -137,6 +136,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = {
.phy_lc_calibrate = _rtl92cu_phy_lc_calibrate,
.phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback,
.dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower,
+ .fill_h2c_cmd = rtl92c_fill_h2c_cmd,
};
static struct rtl_mod_params rtl92cu_mod_params = {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
index a1310abd0d54..262e1e4c6e5b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h
@@ -49,5 +49,8 @@ bool rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 regaddr, u32 bitmask);
void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw,
+ struct ieee80211_sta *sta,
+ u8 rssi_level);
#endif
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 76732b0cd221..a3532e077871 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -824,6 +824,7 @@ static void rtl_usb_stop(struct ieee80211_hw *hw)
/* should after adapter start and interrupt enable. */
set_hal_stop(rtlhal);
+ cancel_work_sync(&rtlpriv->works.fill_h2c_cmd);
/* Enable software */
SET_USB_STOP(rtlusb);
rtl_usb_deinit(hw);
@@ -1026,6 +1027,16 @@ static bool rtl_usb_tx_chk_waitq_insert(struct ieee80211_hw *hw,
return false;
}
+static void rtl_fill_h2c_cmd_work_callback(struct work_struct *work)
+{
+ struct rtl_works *rtlworks =
+ container_of(work, struct rtl_works, fill_h2c_cmd);
+ struct ieee80211_hw *hw = rtlworks->hw;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtlpriv->cfg->ops->fill_h2c_cmd(hw, H2C_RA_MASK, 5, rtlpriv->rate_mask);
+}
+
static struct rtl_intf_ops rtl_usb_ops = {
.adapter_start = rtl_usb_start,
.adapter_stop = rtl_usb_stop,
@@ -1057,6 +1068,8 @@ int rtl_usb_probe(struct usb_interface *intf,
/* this spin lock must be initialized early */
spin_lock_init(&rtlpriv->locks.usb_lock);
+ INIT_WORK(&rtlpriv->works.fill_h2c_cmd,
+ rtl_fill_h2c_cmd_work_callback);
rtlpriv->usb_data_index = 0;
init_completion(&rtlpriv->firmware_loading_complete);
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 44328baa6389..cc03e7c87cbe 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1736,6 +1736,8 @@ struct rtl_hal_ops {
void (*bt_wifi_media_status_notify) (struct ieee80211_hw *hw,
bool mstate);
void (*bt_coex_off_before_lps) (struct ieee80211_hw *hw);
+ void (*fill_h2c_cmd) (struct ieee80211_hw *hw, u8 element_id,
+ u32 cmd_len, u8 *p_cmdbuffer);
};
struct rtl_intf_ops {
@@ -1869,6 +1871,7 @@ struct rtl_works {
struct delayed_work fwevt_wq;
struct work_struct lps_change_work;
+ struct work_struct fill_h2c_cmd;
};
struct rtl_debug {
@@ -2048,6 +2051,7 @@ struct rtl_priv {
};
};
bool enter_ps; /* true when entering PS */
+ u8 rate_mask[5];
/*This must be the last item so
that it points to the data allocated
diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c
index affdb3ec6225..4a0bbb13806b 100644
--- a/drivers/net/wireless/ti/wl12xx/scan.c
+++ b/drivers/net/wireless/ti/wl12xx/scan.c
@@ -310,7 +310,7 @@ static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd,
memcpy(cmd->channels_2, cmd_channels->channels_2,
sizeof(cmd->channels_2));
memcpy(cmd->channels_5, cmd_channels->channels_5,
- sizeof(cmd->channels_2));
+ sizeof(cmd->channels_5));
/* channels_4 are not supported, so no need to copy them */
}
diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h
index 222d03540200..9e5484a73667 100644
--- a/drivers/net/wireless/ti/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h
@@ -36,12 +36,12 @@
#define WL127X_IFTYPE_SR_VER 3
#define WL127X_MAJOR_SR_VER 10
#define WL127X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE
-#define WL127X_MINOR_SR_VER 115
+#define WL127X_MINOR_SR_VER 133
/* minimum multi-role FW version for wl127x */
#define WL127X_IFTYPE_MR_VER 5
#define WL127X_MAJOR_MR_VER 7
#define WL127X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE
-#define WL127X_MINOR_MR_VER 115
+#define WL127X_MINOR_MR_VER 42
/* FW chip version for wl128x */
#define WL128X_CHIP_VER 7
@@ -49,7 +49,7 @@
#define WL128X_IFTYPE_SR_VER 3
#define WL128X_MAJOR_SR_VER 10
#define WL128X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE
-#define WL128X_MINOR_SR_VER 115
+#define WL128X_MINOR_SR_VER 133
/* minimum multi-role FW version for wl128x */
#define WL128X_IFTYPE_MR_VER 5
#define WL128X_MAJOR_MR_VER 7
diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c
index 09d944505ac0..2b642f8c9266 100644
--- a/drivers/net/wireless/ti/wl18xx/scan.c
+++ b/drivers/net/wireless/ti/wl18xx/scan.c
@@ -34,7 +34,7 @@ static void wl18xx_adjust_channels(struct wl18xx_cmd_scan_params *cmd,
memcpy(cmd->channels_2, cmd_channels->channels_2,
sizeof(cmd->channels_2));
memcpy(cmd->channels_5, cmd_channels->channels_5,
- sizeof(cmd->channels_2));
+ sizeof(cmd->channels_5));
/* channels_4 are not supported, so no need to copy them */
}