USB: isp1760: use a write barrier to ensure proper ndelay timing

The ISP1760 has some timing requirements where it has to delay a short
period after a write to a register has started.  However, this delay is
from the time the write hits the USB chip (the ISP1760), not from the
time where the processor started processing the write.  So on a quick
enough processor, it is sometimes possible for the write to not hit the
device before we start delaying, and we then violate the part's timing
requirements, so things stop working.

To avoid all this, insert a write barrier after the register write and
before the timing delay/register read so we can guarantee we only start
counting time after the write has hit the device.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 2 insertions, 0 deletions

diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index d1a3dfc9a408..bdba8c5d844a 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -829,6 +829,7 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
 	 * almost immediately. With ISP1761, this register requires a delay of
 	 * 195ns between a write and subsequent read (see section 15.1.1.3).
 	 */
+	mmiowb();
 	ndelay(195);
 	skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
 
@@ -870,6 +871,7 @@ static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
 	 * almost immediately. With ISP1761, this register requires a delay of
 	 * 195ns between a write and subsequent read (see section 15.1.1.3).
 	 */
+	mmiowb();
 	ndelay(195);
 	skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG);