diff options
author | Michel Dänzer <michel@daenzer.net> | 2009-05-22 10:59:10 +0000 |
---|---|---|
committer | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2009-06-02 10:32:44 +1000 |
commit | 0512a9a8e277a9de2820211eef964473b714ae65 (patch) | |
tree | 04d6dbf1c43b981fd24649302d4ae08401316255 /drivers | |
parent | a85c8e17587e81e1c82f6f341a81e4c778fa65f6 (diff) | |
download | linux-0512a9a8e277a9de2820211eef964473b714ae65.tar.bz2 |
therm_adt746x: Always clear hardware bit which inverts fan speed range.
This bit would get enabled sometimes (probably after suspend/resume), so the
fan would run at full speed below the temperature thresholds, but slow down and
eventually stop if temperatures rose above the thresholds... not exactly what
you want.
Signed-off-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/macintosh/therm_adt746x.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index c0621d50c8a0..0ddf9044948a 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -37,6 +37,7 @@ #define CONFIG_REG 0x40 #define MANUAL_MASK 0xe0 #define AUTO_MASK 0x20 +#define INVERT_MASK 0x10 static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */ static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */ @@ -229,7 +230,8 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan) if (speed >= 0) { manual = read_reg(th, MANUAL_MODE[fan]); - write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK); + write_reg(th, MANUAL_MODE[fan], + (manual|MANUAL_MASK) & (~INVERT_MASK)); write_reg(th, FAN_SPD_SET[fan], speed); } else { /* back to automatic */ |