diff options
| author | David S. Miller <davem@davemloft.net> | 2011-08-27 12:14:34 -0400 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2011-08-27 12:14:34 -0400 |
| commit | 95148229d32e5c68445a59d981482dba57f91919 (patch) | |
| tree | 5bbc1e38abd7db893036d2659788453edffc6dac /drivers | |
| parent | efe3d3c8ee6805c7e8b17f9aae554c04b271ab99 (diff) | |
| parent | 88f07484ccdf08e58dc462ed1ac7eb2e84d88a17 (diff) | |
| download | linux-95148229d32e5c68445a59d981482dba57f91919.tar.bz2 | |
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize
Diffstat (limited to 'drivers')
127 files changed, 730 insertions, 640 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ef6b6bee11da..583f66cd5bbd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -25,18 +25,32 @@ menuconfig NETDEVICES # that for each of the symbols. if NETDEVICES -config IFB - tristate "Intermediate Functional Block support" - depends on NET_CLS_ACT +config NET_CORE + default y + bool "Network core driver support" ---help--- - This is an intermediate driver that allows sharing of - resources. + You can say N here if you do not intend to use any of the + networking core drivers (i.e. VLAN, bridging, bonding, etc.) + +if NET_CORE + +config BONDING + tristate "Bonding driver support" + depends on INET + depends on IPV6 || IPV6=n + ---help--- + Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet + Channels together. This is called 'Etherchannel' by Cisco, + 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. + + The driver supports multiple bonding modes to allow for both high + performance and high availability operation. + + Refer to <file:Documentation/networking/bonding.txt> for more + information. + To compile this driver as a module, choose M here: the module - will be called ifb. If you want to use more than one ifb - device at a time, you need to compile this driver as a module. - Instead of 'ifb', the devices will then be called 'ifb0', - 'ifb1' etc. - Look at the iproute2 documentation directory for usage etc + will be called bonding. config DUMMY tristate "Dummy net driver support" @@ -57,23 +71,59 @@ config DUMMY Instead of 'dummy', the devices will then be called 'dummy0', 'dummy1' etc. -config BONDING - tristate "Bonding driver support" - depends on INET - depends on IPV6 || IPV6=n +config EQUALIZER + tristate "EQL (serial line load balancing) support" ---help--- - Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet - Channels together. This is called 'Etherchannel' by Cisco, - 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. + If you have two serial connections to some other computer (this + usually requires two modems and two telephone lines) and you use + SLIP (the protocol for sending Internet traffic over telephone + lines) or PPP (a better SLIP) on them, you can make them behave like + one double speed connection using this driver. Naturally, this has + to be supported at the other end as well, either with a similar EQL + Linux driver or with a Livingston Portmaster 2e. - The driver supports multiple bonding modes to allow for both high - performance and high availability operation. + Say Y if you want this and read + <file:Documentation/networking/eql.txt>. You may also want to read + section 6.2 of the NET-3-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. - Refer to <file:Documentation/networking/bonding.txt> for more - information. + To compile this driver as a module, choose M here: the module + will be called eql. If unsure, say N. + +config NET_FC + bool "Fibre Channel driver support" + depends on SCSI && PCI + help + Fibre Channel is a high speed serial protocol mainly used to connect + large storage devices to the computer; it is compatible with and + intended to replace SCSI. + + If you intend to use Fibre Channel, you need to have a Fibre channel + adaptor card in your computer; say Y here and to the driver for your + adaptor below. You also should have said Y to "SCSI support" and + "SCSI generic support". + +config MII + tristate "Generic Media Independent Interface device support" + help + Most ethernet controllers have MII transceiver either as an external + or internal device. It is safe to say Y or M here even if your + ethernet card lacks MII. + +source "drivers/ieee802154/Kconfig" +config IFB + tristate "Intermediate Functional Block support" + depends on NET_CLS_ACT + ---help--- + This is an intermediate driver that allows sharing of + resources. To compile this driver as a module, choose M here: the module - will be called bonding. + will be called ifb. If you want to use more than one ifb + device at a time, you need to compile this driver as a module. + Instead of 'ifb', the devices will then be called 'ifb0', + 'ifb1' etc. + Look at the iproute2 documentation directory for usage etc config MACVLAN tristate "MAC-VLAN support (EXPERIMENTAL)" @@ -102,24 +152,46 @@ config MACVTAP To compile this driver as a module, choose M here: the module will be called macvtap. -config EQUALIZER - tristate "EQL (serial line load balancing) support" +config NETCONSOLE + tristate "Network console logging support" ---help--- - If you have two serial connections to some other computer (this - usually requires two modems and two telephone lines) and you use - SLIP (the protocol for sending Internet traffic over telephone - lines) or PPP (a better SLIP) on them, you can make them behave like - one double speed connection using this driver. Naturally, this has - to be supported at the other end as well, either with a similar EQL - Linux driver or with a Livingston Portmaster 2e. + If you want to log kernel messages over the network, enable this. + See <file:Documentation/networking/netconsole.txt> for details. - Say Y if you want this and read - <file:Documentation/networking/eql.txt>. You may also want to read - section 6.2 of the NET-3-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. +config NETCONSOLE_DYNAMIC + bool "Dynamic reconfiguration of logging targets" + depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \ + !(NETCONSOLE=y && CONFIGFS_FS=m) + help + This option enables the ability to dynamically reconfigure target + parameters (interface, IP addresses, port numbers, MAC addresses) + at runtime through a userspace interface exported using configfs. + See <file:Documentation/networking/netconsole.txt> for details. - To compile this driver as a module, choose M here: the module - will be called eql. If unsure, say N. +config NETPOLL + def_bool NETCONSOLE + +config NETPOLL_TRAP + bool "Netpoll traffic trapping" + default n + depends on NETPOLL + +config NET_POLL_CONTROLLER + def_bool NETPOLL + +config RIONET + tristate "RapidIO Ethernet over messaging driver support" + depends on RAPIDIO + +config RIONET_TX_SIZE + int "Number of outbound queue entries" + depends on RIONET + default "128" + +config RIONET_RX_SIZE + int "Number of inbound queue entries" + depends on RIONET + default "128" config TUN tristate "Universal TUN/TAP device driver support" @@ -151,6 +223,28 @@ config VETH When one end receives the packet it appears on its pair and vice versa. +config VIRTIO_NET + tristate "Virtio network driver (EXPERIMENTAL)" + depends on EXPERIMENTAL && VIRTIO + ---help--- + This is the virtual network driver for virtio. It can be used with + lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. + +endif # NET_CORE + +config SUNGEM_PHY + tristate + +source "drivers/net/arcnet/Kconfig" + +source "drivers/atm/Kconfig" + +source "drivers/net/caif/Kconfig" + +source "drivers/net/ethernet/Kconfig" + +source "drivers/net/fddi/Kconfig" + config NET_SB1000 tristate "General Instruments Surfboard 1000" depends on PNP @@ -175,46 +269,26 @@ config NET_SB1000 If you don't have this card, of course say N. -source "drivers/net/arcnet/Kconfig" - -config MII - tristate "Generic Media Independent Interface device support" - help - Most ethernet controllers have MII transceiver either as an external - or internal device. It is safe to say Y or M here even if your - ethernet card lacks MII. - source "drivers/net/phy/Kconfig" -config SUNGEM_PHY - tristate +source "drivers/net/plip/Kconfig" -# -# Ethernet -# +source "drivers/net/ppp/Kconfig" -source "drivers/net/ethernet/Kconfig" +source "drivers/net/slip/Kconfig" + +source "drivers/s390/net/Kconfig" source "drivers/net/tokenring/Kconfig" +source "drivers/net/usb/Kconfig" + source "drivers/net/wireless/Kconfig" source "drivers/net/wimax/Kconfig" -source "drivers/net/usb/Kconfig" - -source "drivers/net/pcmcia/Kconfig" - source "drivers/net/wan/Kconfig" -source "drivers/atm/Kconfig" - -source "drivers/ieee802154/Kconfig" - -source "drivers/s390/net/Kconfig" - -source "drivers/net/caif/Kconfig" - config XEN_NETDEV_FRONTEND tristate "Xen network device frontend driver" depends on XEN @@ -254,444 +328,6 @@ config XEN_NETDEV_BACKEND compile this driver as a module, chose M here: the module will be called xen-netback. -config RIONET - tristate "RapidIO Ethernet over messaging driver support" - depends on RAPIDIO - -config RIONET_TX_SIZE - int "Number of outbound queue entries" - depends on RIONET - default "128" - -config RIONET_RX_SIZE - int "Number of inbound queue entries" - depends on RIONET - default "128" - -config FDDI - tristate "FDDI driver support" - depends on (PCI || EISA || TC) - help - Fiber Distributed Data Interface is a high speed local area network - design; essentially a replacement for high speed Ethernet. FDDI can - run over copper or fiber. If you are connected to such a network and - want a driver for the FDDI card in your computer, say Y here (and - then also Y to the driver for your FDDI card, below). Most people - will say N. - -config DEFXX - tristate "Digital DEFTA/DEFEA/DEFPA adapter support" - depends on FDDI && (PCI || EISA || TC) - ---help--- - This is support for the DIGITAL series of TURBOchannel (DEFTA), - EISA (DEFEA) and PCI (DEFPA) controllers which can connect you - to a local FDDI network. - - To compile this driver as a module, choose M here: the module - will be called defxx. If unsure, say N. - -config DEFXX_MMIO - bool - prompt "Use MMIO instead of PIO" if PCI || EISA - depends on DEFXX - default n if PCI || EISA - default y - ---help--- - This instructs the driver to use EISA or PCI memory-mapped I/O - (MMIO) as appropriate instead of programmed I/O ports (PIO). - Enabling this gives an improvement in processing time in parts - of the driver, but it may cause problems with EISA (DEFEA) - adapters. TURBOchannel does not have the concept of I/O ports, - so MMIO is always used for these (DEFTA) adapters. - - If unsure, say N. - -config SKFP - tristate "SysKonnect FDDI PCI support" - depends on FDDI && PCI - select BITREVERSE - ---help--- - Say Y here if you have a SysKonnect FDDI PCI adapter. - The following adapters are supported by this driver: - - SK-5521 (SK-NET FDDI-UP) - - SK-5522 (SK-NET FDDI-UP DAS) - - SK-5541 (SK-NET FDDI-FP) - - SK-5543 (SK-NET FDDI-LP) - - SK-5544 (SK-NET FDDI-LP DAS) - - SK-5821 (SK-NET FDDI-UP64) - - SK-5822 (SK-NET FDDI-UP64 DAS) - - SK-5841 (SK-NET FDDI-FP64) - - SK-5843 (SK-NET FDDI-LP64) - - SK-5844 (SK-NET FDDI-LP64 DAS) - - Netelligent 100 FDDI DAS Fibre SC - - Netelligent 100 FDDI SAS Fibre SC - - Netelligent 100 FDDI DAS UTP - - Netelligent 100 FDDI SAS UTP - - Netelligent 100 FDDI SAS Fibre MIC - - Read <file:Documentation/networking/skfp.txt> for information about - the driver. - - Questions concerning this driver can be addressed to: - <linux@syskonnect.de> - - To compile this driver as a module, choose M here: the module - will be called skfp. This is recommended. - -config HIPPI - bool "HIPPI driver support (EXPERIMENTAL)" - depends on EXPERIMENTAL && INET && PCI - help - HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and - 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI - can run over copper (25m) or fiber (300m on multi-mode or 10km on - single-mode). HIPPI networks are commonly used for clusters and to - connect to super computers. If you are connected to a HIPPI network - and have a HIPPI network card in your computer that you want to use - under Linux, say Y here (you must also remember to enable the driver - for your HIPPI card below). Most people will say N here. - -config ROADRUNNER - tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)" - depends on HIPPI && PCI - help - Say Y here if this is your PCI HIPPI network card. - - To compile this driver as a module, choose M here: the module - will be called rrunner. If unsure, say N. - -config ROADRUNNER_LARGE_RINGS - bool "Use large TX/RX rings (EXPERIMENTAL)" - depends on ROADRUNNER - help - If you say Y here, the RoadRunner driver will preallocate up to 2 MB - of additional memory to allow for fastest operation, both for - transmitting and receiving. This memory cannot be used by any other - kernel code or by user space programs. Say Y here only if you have - the memory. - -config PLIP - tristate "PLIP (parallel port) support" - depends on PARPORT - ---help--- - PLIP (Parallel Line Internet Protocol) is used to create a - reasonably fast mini network consisting of two (or, rarely, more) - local machines. A PLIP link from a Linux box is a popular means to - install a Linux distribution on a machine which doesn't have a - CD-ROM drive (a minimal system has to be transferred with floppies - first). The kernels on both machines need to have this PLIP option - enabled for this to work. - - The PLIP driver has two modes, mode 0 and mode 1. The parallel - ports (the connectors at the computers with 25 holes) are connected - with "null printer" or "Turbo Laplink" cables which can transmit 4 - bits at a time (mode 0) or with special PLIP cables, to be used on - bidirectional parallel ports only, which can transmit 8 bits at a - time (mode 1); you can find the wiring of these cables in - <file:Documentation/networking/PLIP.txt>. The cables can be up to - 15m long. Mode 0 works also if one of the machines runs DOS/Windows - and has some PLIP software installed, e.g. the Crynwr PLIP packet - driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>) - and winsock or NCSA's telnet. - - If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well - as the NET-3-HOWTO, both available from - <http://www.tldp.org/docs.html#howto>. Note that the PLIP - protocol has been changed and this PLIP driver won't work together - with the PLIP support in Linux versions 1.0.x. This option enlarges - your kernel by about 8 KB. - - To compile this driver as a module, choose M here. The module - will be called plip. If unsure, say Y or M, in case you buy - a laptop later. - -config PPP - tristate "PPP (point-to-point protocol) support" - select SLHC - ---help--- - PPP (Point to Point Protocol) is a newer and better SLIP. It serves - the same purpose: sending Internet traffic over telephone (and other - serial) lines. Ask your access provider if they support it, because - otherwise you can't use it; most Internet access providers these - days support PPP rather than SLIP. - - To use PPP, you need an additional program called pppd as described - in the PPP-HOWTO, available at - <http://www.tldp.org/docs.html#howto>. Make sure that you have - the version of pppd recommended in <file:Documentation/Changes>. - The PPP option enlarges your kernel by about 16 KB. - - There are actually two versions of PPP: the traditional PPP for - asynchronous lines, such as regular analog phone lines, and - synchronous PPP which can be used over digital ISDN lines for - example. If you want to use PPP over phone lines or other - asynchronous serial lines, you need to say Y (or M) here and also to - the next option, "PPP support for async serial ports". For PPP over - synchronous lines, you should say Y (or M) here and to "Support - synchronous PPP", below. - - If you said Y to "Version information on all symbols" above, then - you cannot compile the PPP driver into the kernel; you can then only - compile it as a module. To compile this driver as a module, choose M - here. The module will be called ppp_generic. - -config PPP_MULTILINK - bool "PPP multilink support (EXPERIMENTAL)" - depends on PPP && EXPERIMENTAL - help - PPP multilink is a protocol (defined in RFC 1990) which allows you - to combine several (logical or physical) lines into one logical PPP - connection, so that you can utilize your full bandwidth. - - This has to be supported at the other end as well and you need a - version of the pppd daemon which understands the multilink protocol. - - If unsure, say N. - -config PPP_FILTER - bool "PPP filtering" - depends on PPP - help - Say Y here if you want to be able to filter the packets passing over - PPP interfaces. This allows you to control which packets count as - activity (i.e. which packets will reset the idle timer or bring up - a demand-dialed link) and which packets are to be dropped entirely. - You need to say Y here if you wish to use the pass-filter and - active-filter options to pppd. - - If unsure, say N. - -config PPP_ASYNC - tristate "PPP support for async serial ports" - depends on PPP - select CRC_CCITT - ---help--- - Say Y (or M) here if you want to be able to use PPP over standard - asynchronous serial ports, such as COM1 or COM2 on a PC. If you use - a modem (not a synchronous or ISDN modem) to contact your ISP, you - need this option. - - To compile this driver as a module, choose M here. - - If unsure, say Y. - -config PPP_SYNC_TTY - tristate "PPP support for sync tty ports" - depends on PPP - help - Say Y (or M) here if you want to be able to use PPP over synchronous - (HDLC) tty devices, such as the SyncLink adapter. These devices - are often used for high-speed leased lines like T1/E1. - - To compile this driver as a module, choose M here. - -config PPP_DEFLATE - tristate "PPP Deflate compression" - depends on PPP - select ZLIB_INFLATE - select ZLIB_DEFLATE - ---help--- - Support for the Deflate compression method for PPP, which uses the - Deflate algorithm (the same algorithm that gzip uses) to compress - each PPP packet before it is sent over the wire. The machine at the - other end of the PPP link (usually your ISP) has to support the - Deflate compression method as well for this to be useful. Even if - they don't support it, it is safe to say Y here. - - To compile this driver as a module, choose M here. - -config PPP_BSDCOMP - tristate "PPP BSD-Compress compression" - depends on PPP - ---help--- - Support for the BSD-Compress compression method for PPP, which uses - the LZW compression method to compress each PPP packet before it is - sent over the wire. The machine at the other end of the PPP link - (usually your ISP) has to support the BSD-Compress compression - method as well for this to be useful. Even if they don't support it, - it is safe to say Y here. - - The PPP Deflate compression method ("PPP Deflate compression", - above) is preferable to BSD-Compress, because it compresses better - and is patent-free. - - Note that the BSD compression code will always be compiled as a - module; it is called bsd_comp and will show up in the directory - modules once you have said "make modules". If unsure, say N. - -config PPP_MPPE - tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)" - depends on PPP && EXPERIMENTAL - select CRYPTO - select CRYPTO_SHA1 - select CRYPTO_ARC4 - select CRYPTO_ECB - ---help--- - Support for the MPPE Encryption protocol, as employed by the - Microsoft Point-to-Point Tunneling Protocol. - - See http://pptpclient.sourceforge.net/ for information on - configuring PPTP clients and servers to utilize this method. - -config PPPOE - tristate "PPP over Ethernet (EXPERIMENTAL)" - depends on EXPERIMENTAL && PPP - help - Support for PPP over Ethernet. - - This driver requires the latest version of pppd from the CVS - repository at cvs.samba.org. Alternatively, see the - RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) - which contains instruction on how to use this driver (under - the heading "Kernel mode PPPoE"). - -config PPTP - tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)" - depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX - help - Support for PPP over IPv4.(Point-to-Point Tunneling Protocol) - - This driver requires pppd plugin to work in client mode or - modified pptpd (poptop) to work in server mode. - See http://accel-pptp.sourceforge.net/ for information how to - utilize this module. - -config PPPOATM - tristate "PPP over ATM" - depends on ATM && PPP - help - Support PPP (Point to Point Protocol) encapsulated in ATM frames. - This implementation does not yet comply with section 8 of RFC2364, - which can lead to bad results if the ATM peer loses state and - changes its encapsulation unilaterally. - -config PPPOL2TP - tristate "PPP over L2TP (EXPERIMENTAL)" - depends on EXPERIMENTAL && L2TP && PPP - help - Support for PPP-over-L2TP socket family. L2TP is a protocol - used by ISPs and enterprises to tunnel PPP traffic over UDP - tunnels. L2TP is replacing PPTP for VPN uses. - -config SLIP - tristate "SLIP (serial line) support" - ---help--- - Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to - connect to your Internet service provider or to connect to some - other local Unix box or if you want to configure your Linux box as a - Slip/CSlip server for other people to dial in. SLIP (Serial Line - Internet Protocol) is a protocol used to send Internet traffic over - serial connections such as telephone lines or null modem cables; - nowadays, the protocol PPP is more commonly used for this same - purpose. - - Normally, your access provider has to support SLIP in order for you - to be able to use it, but there is now a SLIP emulator called SLiRP - around (available from - <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which - allows you to use SLIP over a regular dial up shell connection. If - you plan to use SLiRP, make sure to say Y to CSLIP, below. The - NET-3-HOWTO, available from - <http://www.tldp.org/docs.html#howto>, explains how to - configure SLIP. Note that you don't need this option if you just - want to run term (term is a program which gives you almost full - Internet connectivity if you have a regular dial up shell account on - some Internet connected Unix computer. Read - <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP - support will enlarge your kernel by about 4 KB. If unsure, say N. - - To compile this driver as a module, choose M here. The module - will be called slip. - -config SLIP_COMPRESSED - bool "CSLIP compressed headers" - depends on SLIP - select SLHC - ---help--- - This protocol is faster than SLIP because it uses compression on the - TCP/IP headers (not on the data itself), but it has to be supported - on both ends. Ask your access provider if you are not sure and - answer Y, just in case. You will still be able to use plain SLIP. If - you plan to use SLiRP, the SLIP emulator (available from - <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which - allows you to use SLIP over a regular dial up shell connection, you - definitely want to say Y here. The NET-3-HOWTO, available from - <http://www.tldp.org/docs.html#howto>, explains how to configure - CSLIP. This won't enlarge your kernel. - -config SLHC - tristate - help - This option enables Van Jacobsen serial line header compression - routines. - -config SLIP_SMART - bool "Keepalive and linefill" - depends on SLIP - help - Adds additional capabilities to the SLIP driver to support the - RELCOM line fill and keepalive monitoring. Ideal on poor quality - analogue lines. - -config SLIP_MODE_SLIP6 - bool "Six bit SLIP encapsulation" - depends on SLIP - help - Just occasionally you may need to run IP over hostile serial - networks that don't pass all control characters or are only seven - bit. Saying Y here adds an extra mode you can use with SLIP: - "slip6". In this mode, SLIP will only send normal ASCII symbols over - the serial device. Naturally, this has to be supported at the other - end of the link as well. It's good enough, for example, to run IP - over the async ports of a Camtec JNT Pad. If unsure, say N. - -config NET_FC - bool "Fibre Channel driver support" - depends on SCSI && PCI - help - Fibre Channel is a high speed serial protocol mainly used to connect - large storage devices to the computer; it is compatible with and - intended to replace SCSI. - - If you intend to use Fibre Channel, you need to have a Fibre channel - adaptor card in your computer; say Y here and to the driver for your - adaptor below. You also should have said Y to "SCSI support" and - "SCSI generic support". - -config NETCONSOLE - tristate "Network console logging support" - ---help--- - If you want to log kernel messages over the network, enable this. - See <file:Documentation/networking/netconsole.txt> for details. - -config NETCONSOLE_DYNAMIC - bool "Dynamic reconfiguration of logging targets" - depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \ - !(NETCONSOLE=y && CONFIGFS_FS=m) - help - This option enables the ability to dynamically reconfigure target - parameters (interface, IP addresses, port numbers, MAC addresses) - at runtime through a userspace interface exported using configfs. - See <file:Documentation/networking/netconsole.txt> for details. - -config NETPOLL - def_bool NETCONSOLE - -config NETPOLL_TRAP - bool "Netpoll traffic trapping" - default n - depends on NETPOLL - -config NET_POLL_CONTROLLER - def_bool NETPOLL - -config VIRTIO_NET - tristate "Virtio network driver (EXPERIMENTAL)" - depends on EXPERIMENTAL && VIRTIO - ---help--- - This is the virtual network driver for virtio. It can be used with - lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. - config VMXNET3 tristate "VMware VMXNET3 ethernet driver" depends on PCI && INET diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c33009b49608..1f52e73547b0 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -2,57 +2,61 @@ # Makefile for the Linux network device drivers. # -obj-$(CONFIG_MII) += mii.o -obj-$(CONFIG_MDIO) += mdio.o -obj-$(CONFIG_PHYLIB) += phy/ -obj-$(CONFIG_CAN) += can/ -obj-$(CONFIG_BONDING) += bonding/ -obj-$(CONFIG_VMXNET3) += vmxnet3/ - # -# link order important here +# Networking Core Drivers # -obj-$(CONFIG_PLIP) += plip.o -obj-$(CONFIG_ROADRUNNER) += rrunner.o -obj-$(CONFIG_SKFP) += skfp/ -obj-$(CONFIG_RIONET) += rionet.o - -# -# end link order section -# - -obj-$(CONFIG_NET) += Space.o loopback.o -obj-$(CONFIG_NET_SB1000) += sb1000.o -obj-$(CONFIG_PPP) += ppp_generic.o -obj-$(CONFIG_PPP_ASYNC) += ppp_async.o -obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o -obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o -obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o -obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o -obj-$(CONFIG_PPPOE) += pppox.o pppoe.o -obj-$(CONFIG_PPPOL2TP) += pppox.o -obj-$(CONFIG_PPTP) += pppox.o pptp.o -obj-$(CONFIG_SLIP) += slip.o -obj-$(CONFIG_SLHC) += slhc.o - -obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o -obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/ - +obj-$(CONFIG_BONDING) += bonding/ obj-$(CONFIG_DUMMY) += dummy.o +obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_IFB) += ifb.o obj-$(CONFIG_MACVLAN) += macvlan.o obj-$(CONFIG_MACVTAP) += macvtap.o -obj-$(CONFIG_DEFXX) += defxx.o -obj-$(CONFIG_EQUALIZER) += eql.o +obj-$(CONFIG_MII) += mii.o +obj-$(CONFIG_MDIO) += mdio.o +obj-$(CONFIG_NET) += Space.o loopback.o +obj-$(CONFIG_NETCONSOLE) += netconsole.o +obj-$(CONFIG_PHYLIB) += phy/ +obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_VETH) += veth.o +obj-$(CONFIG_VIRTIO_NET) += virtio_net.o +# +# Networking Drivers +# +obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_DEV_APPLETALK) += appletalk/ +obj-$(CONFIG_CAIF) += caif/ +obj-$(CONFIG_CAN) += can/ +obj-$(CONFIG_ETRAX_ETHERNET) += cris/ obj-$(CONFIG_ETHERNET) += ethernet/ +obj-$(CONFIG_FDDI) += fddi/ +obj-$(CONFIG_HIPPI) += hippi/ +obj-$(CONFIG_HAMRADIO) += hamradio/ +obj-$(CONFIG_IRDA) += irda/ +obj-$(CONFIG_PLIP) += plip/ +onj-$(CONFIG_PPP) += ppp/ +obj-$(CONFIG_PPP_ASYNC) += ppp/ +obj-$(CONFIG_PPP_BSDCOMP) += ppp/ +obj-$(CONFIG_PPP_DEFLATE) += ppp/ +obj-$(CONFIG_PPP_MPPE) += ppp/ +obj-$(CONFIG_PPP_SYNC_TTY) += ppp/ +obj-$(CONFIG_PPPOE) += ppp/ +obj-$(CONFIG_PPPOL2TP) += ppp/ +obj-$(CONFIG_PPTP) += ppp/ +onj-$(CONFIG_SLIP) += slip/ +obj-$(CONFIG_SLHC) += slip/ +obj-$(CONFIG_NET_SB1000) += sb1000.o +onj-$(CONFIG_SLIP) += slip/ +obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ -obj-$(CONFIG_ARCNET) += arcnet/ -obj-$(CONFIG_NET_PCMCIA) += pcmcia/ +obj-$(CONFIG_WLAN) += wireless/ +obj-$(CONFIG_WIMAX) += wimax/ + +obj-$(CONFIG_VMXNET3) += vmxnet3/ +obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o +obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/ obj-$(CONFIG_USB_CATC) += usb/ obj-$(CONFIG_USB_KAWETH) += usb/ @@ -63,17 +67,3 @@ obj-$(CONFIG_USB_USBNET) += usb/ obj-$(CONFIG_USB_ZD1201) += usb/ obj-$(CONFIG_USB_IPHETH) += usb/ obj-$(CONFIG_USB_CDC_PHONET) += usb/ - -obj-$(CONFIG_WLAN) += wireless/ -obj-$(CONFIG_HAMRADIO) += hamradio/ -obj-$(CONFIG_IRDA) += irda/ -obj-$(CONFIG_ETRAX_ETHERNET) += cris/ - -obj-$(CONFIG_NETCONSOLE) += netconsole.o - -obj-$(CONFIG_VIRTIO_NET) += virtio_net.o - -obj-$(CONFIG_WIMAX) += wimax/ -obj-$(CONFIG_CAIF) += caif/ - -obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index 3b2f7f115464..a73d9dc80ff6 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -3,8 +3,8 @@ # menuconfig ARCNET - depends on NETDEVICES && (ISA || PCI) - tristate "ARCnet support" + depends on NETDEVICES && (ISA || PCI || PCMCIA) + bool "ARCnet support" ---help--- If you have a network card of this type, say Y and check out the (arguably) beautiful poetry in @@ -123,4 +123,14 @@ config ARCNET_COM20020_PCI tristate "Support for COM20020 on PCI" depends on ARCNET_COM20020 && PCI +config ARCNET_COM20020_CS + tristate "COM20020 ARCnet PCMCIA support" + depends on ARCNET_COM20020 && PCMCIA + help + Say Y here if you intend to attach this type of ARCnet PCMCIA card + to your computer. + + To compile this driver as a module, choose M here: the module will be + called com20020_cs. If unsure, say N. + endif # ARCNET diff --git a/drivers/net/arcnet/Makefile b/drivers/net/arcnet/Makefile index 5861af543d42..5ce8ee63e435 100644 --- a/drivers/net/arcnet/Makefile +++ b/drivers/net/arcnet/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_ARCNET_RIM_I) += arc-rimi.o obj-$(CONFIG_ARCNET_COM20020) += com20020.o obj-$(CONFIG_ARCNET_COM20020_ISA) += com20020-isa.o obj-$(CONFIG_ARCNET_COM20020_PCI) += com20020-pci.o +obj-$(CONFIG_ARCNET_COM20020_CS) += com20020_cs.o diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c index 980e65c14936..980e65c14936 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/arcnet/com20020_cs.c diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 65cc129da114..a439cbdda3b9 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_3COM bool "3Com devices" + default y depends on ISA || EISA || MCA || PCI || PCMCIA ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index 5d2169809b19..e04ade444247 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_8390 bool "National Semi-conductor 8390 devices" + default y depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \ ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \ MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \ diff --git a/drivers/net/ethernet/adaptec/Kconfig b/drivers/net/ethernet/adaptec/Kconfig index 5e9dbe9817fd..5c804bbe3dab 100644 --- a/drivers/net/ethernet/adaptec/Kconfig +++ b/drivers/net/ethernet/adaptec/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_ADAPTEC bool "Adaptec devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/alteon/Kconfig b/drivers/net/ethernet/alteon/Kconfig index 68862e4d145c..799a85282070 100644 --- a/drivers/net/ethernet/alteon/Kconfig +++ b/drivers/net/ethernet/alteon/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_ALTEON bool "Alteon devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 05139403ea8d..8af1c934dbd5 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_AMD bool "AMD devices" + default y depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \ SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \ (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig index fc796bc353d0..59d5c2630acb 100644 --- a/drivers/net/ethernet/apple/Kconfig +++ b/drivers/net/ethernet/apple/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_APPLE bool "Apple devices" + default y depends on (PPC_PMAC && PPC32) || MAC || ISA || EISA || MACH_IXDP2351 \ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440 ---help--- diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig index 966c6c7ea09c..26ab8cae28b5 100644 --- a/drivers/net/ethernet/atheros/Kconfig +++ b/drivers/net/ethernet/atheros/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_ATHEROS bool "Atheros devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 8986e57d7f9c..d82ad221ebd4 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_BROADCOM bool "Broadcom devices" + default y depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \ SIBYTE_SB1xxx_SOC ---help--- diff --git a/drivers/net/ethernet/brocade/Kconfig b/drivers/net/ethernet/brocade/Kconfig index 03f0b17b87c3..264155778857 100644 --- a/drivers/net/ethernet/brocade/Kconfig +++ b/drivers/net/ethernet/brocade/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_BROCADE bool "Brocade devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig index 7b54574107ce..2de50f95798f 100644 --- a/drivers/net/ethernet/chelsio/Kconfig +++ b/drivers/net/ethernet/chelsio/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_CHELSIO bool "Chelsio devices" + default y depends on PCI || INET ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 53ebe7899174..e0cacf662914 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_CIRRUS bool "Cirrus devices" + default y depends on ARM && ARCH_EP93XX ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/cisco/Kconfig b/drivers/net/ethernet/cisco/Kconfig index bbd534880670..94606f7ee13a 100644 --- a/drivers/net/ethernet/cisco/Kconfig +++ b/drivers/net/ethernet/cisco/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_CISCO bool "Cisco devices" + default y depends on PCI && INET ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/dec/Kconfig b/drivers/net/ethernet/dec/Kconfig index 40e8df9fde8d..37940279ded8 100644 --- a/drivers/net/ethernet/dec/Kconfig +++ b/drivers/net/ethernet/dec/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_DEC bool "Digital Equipment devices" + default y depends on PCI || EISA || CARDBUS ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig index 9fdb66b66f15..84a28a668162 100644 --- a/drivers/net/ethernet/dlink/Kconfig +++ b/drivers/net/ethernet/dlink/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_DLINK bool "D-Link devices" + default y depends on PCI || PARPORT ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/emulex/Kconfig b/drivers/net/ethernet/emulex/Kconfig index 018ac94fb824..7a28a6433944 100644 --- a/drivers/net/ethernet/emulex/Kconfig +++ b/drivers/net/ethernet/emulex/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_EMULEX bool "Emulex devices" + default y depends on PCI && INET ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig index b0d76f01d47b..5918c6891694 100644 --- a/drivers/net/ethernet/faraday/Kconfig +++ b/drivers/net/ethernet/faraday/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_FARADAY bool "Faraday devices" + default y depends on ARM ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index 2fd2c614c08b..4dbe41f1cbc6 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_FREESCALE bool "Freescale devices" + default y depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \ M523x || M527x || M5272 || M528x || M520x || M532x || \ IMX_HAVE_PLATFORM_FEC || MXS_HAVE_PLATFORM_FEC || \ diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig index 2cd968edb733..dffee9d44fd5 100644 --- a/drivers/net/ethernet/fujitsu/Kconfig +++ b/drivers/net/ethernet/fujitsu/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_FUJITSU bool "Fujitsu devices" + default y depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL) ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/hp/Kconfig b/drivers/net/ethernet/hp/Kconfig index 07b42e963143..a0b8ece1e3bc 100644 --- a/drivers/net/ethernet/hp/Kconfig +++ b/drivers/net/ethernet/hp/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_HP bool "HP devices" + default y depends on ISA || EISA || PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig index 5c30a5b3cba9..2be46986cbe2 100644 --- a/drivers/net/ethernet/i825xx/Kconfig +++ b/drivers/net/ethernet/i825xx/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_I825XX bool "Intel (82586/82593/82596) devices" + default y depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \ ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \ GSC || BVME6000 || MVME16x || EXPERIMENTAL) diff --git a/drivers/net/ethernet/ibm/Kconfig b/drivers/net/ethernet/ibm/Kconfig index 4c7ef980f1c6..9e16f3fa97b2 100644 --- a/drivers/net/ethernet/ibm/Kconfig +++ b/drivers/net/ethernet/ibm/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_IBM bool "IBM devices" + default y depends on MCA || PPC_PSERIES || PPC_PSERIES || PPC_DCR || \ (IBMEBUS && INET && SPARSEMEM) ---help--- diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 5fe185ba07bc..4a98e83812b7 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_INTEL bool "Intel devices" + default y depends on PCI || PCI_MSI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig index e525408367b6..0029934748bc 100644 --- a/drivers/net/ethernet/marvell/Kconfig +++ b/drivers/net/ethernet/marvell/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_MARVELL bool "Marvell devices" + default y depends on PCI || CPU_PXA168 || MV64X60 || PPC32 || PLAT_ORION || INET ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig index e06949127b1f..d8099a7903d3 100644 --- a/drivers/net/ethernet/mellanox/Kconfig +++ b/drivers/net/ethernet/mellanox/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_MELLANOX bool "Mellanox devices" + default y depends on PCI && INET ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig index 4227de6d11f2..bd090dbe3ad6 100644 --- a/drivers/net/ethernet/micrel/Kconfig +++ b/drivers/net/ethernet/micrel/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_MICREL bool "Micrel devices" + default y depends on (HAS_IOMEM && DMA_ENGINE) || SPI || PCI || HAS_IOMEM || \ (ARM && ARCH_KS8695) ---help--- diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig index 53b0b04935a3..8163fd0f453f 100644 --- a/drivers/net/ethernet/microchip/Kconfig +++ b/drivers/net/ethernet/microchip/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_MICROCHIP bool "Microchip devices" + default y depends on SPI && EXPERIMENTAL ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/myricom/Kconfig b/drivers/net/ethernet/myricom/Kconfig index 1816ae12ce07..540f0c6fc160 100644 --- a/drivers/net/ethernet/myricom/Kconfig +++ b/drivers/net/ethernet/myricom/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_MYRI bool "Myricom devices" + default y depends on PCI && INET ---help--- If you have a network (Ethernet) card belonging to this class, say diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig index 1e5c1e1ec79a..4a6b9fd073b6 100644 --- a/drivers/net/ethernet/natsemi/Kconfig +++ b/drivers/net/ethernet/natsemi/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_NATSEMI bool "National Semi-conductor devices" + default y depends on MCA || MAC || MACH_JAZZ || PCI || XTENSA_PLATFORM_XT2000 ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/neterion/Kconfig b/drivers/net/ethernet/neterion/Kconfig index 3d98e62c2412..ff26b54bd3fb 100644 --- a/drivers/net/ethernet/neterion/Kconfig +++ b/drivers/net/ethernet/neterion/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_EXAR bool "Exar devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig index 3b91c3be6270..01182b559473 100644 --- a/drivers/net/ethernet/nuvoton/Kconfig +++ b/drivers/net/ethernet/nuvoton/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_NUVOTON bool "Nuvoton devices" + default y depends on ARM && ARCH_W90X900 ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/nvidia/Kconfig b/drivers/net/ethernet/nvidia/Kconfig index 0a18e7314195..ace19e7f6d13 100644 --- a/drivers/net/ethernet/nvidia/Kconfig +++ b/drivers/net/ethernet/nvidia/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_NVIDIA bool "NVIDIA devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/oki-semi/Kconfig b/drivers/net/ethernet/oki-semi/Kconfig index 97f5e72f0ec7..ecd45f9ea9d9 100644 --- a/drivers/net/ethernet/oki-semi/Kconfig +++ b/drivers/net/ethernet/oki-semi/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_OKI bool "OKI Semiconductor devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/pasemi/Kconfig b/drivers/net/ethernet/pasemi/Kconfig index ccb79b8069ad..01e6c329d78c 100644 --- a/drivers/net/ethernet/pasemi/Kconfig +++ b/drivers/net/ethernet/pasemi/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_PASEMI bool "PA Semi devices" + default y depends on PPC_PASEMI && PCI && INET ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig index a7c4424011ec..a8669adecc97 100644 --- a/drivers/net/ethernet/qlogic/Kconfig +++ b/drivers/net/ethernet/qlogic/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_QLOGIC bool "QLogic devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/racal/Kconfig b/drivers/net/ethernet/racal/Kconfig index 45d493036cec..01969e0a9c68 100644 --- a/drivers/net/ethernet/racal/Kconfig +++ b/drivers/net/ethernet/racal/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI devices" + default y depends on ISA ---help--- If you have a network (Ethernet) card belonging to this class, such diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig index b15ebac75f51..2055f7eb2ba9 100644 --- a/drivers/net/ethernet/rdc/Kconfig +++ b/drivers/net/ethernet/rdc/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_RDC bool "RDC devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig index a5f67a091c4d..d8df67ac51b9 100644 --- a/drivers/net/ethernet/realtek/Kconfig +++ b/drivers/net/ethernet/realtek/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_REALTEK bool "Realtek devices" + default y depends on PCI || (PARPORT && X86) ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig index 02667915b34a..49b6d5b1dfd2 100644 --- a/drivers/net/ethernet/seeq/Kconfig +++ b/drivers/net/ethernet/seeq/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_SEEQ bool "SEEQ devices" + default y depends on (ARM && ARCH_ACORN) || SGI_HAS_SEEQ || EXPERIMENTAL ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig index 3098594ab274..e832f46660c9 100644 --- a/drivers/net/ethernet/sgi/Kconfig +++ b/drivers/net/ethernet/sgi/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_SGI bool "SGI devices" + default y depends on (PCI && SGI_IP27) || SGI_IP32 ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig index 01d43e870eeb..68d052b09af1 100644 --- a/drivers/net/ethernet/sis/Kconfig +++ b/drivers/net/ethernet/sis/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_SIS bool "Silicon Integrated Systems (SiS) devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig index 702efe686c48..f9619285b5ef 100644 --- a/drivers/net/ethernet/smsc/Kconfig +++ b/drivers/net/ethernet/smsc/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_SMSC bool "SMC (SMSC)/Western Digital devices" + default y depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \ BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA ---help--- diff --git a/drivers/net/ethernet/stmicro/Kconfig b/drivers/net/ethernet/stmicro/Kconfig index e40df6433860..f4a80da00650 100644 --- a/drivers/net/ethernet/stmicro/Kconfig +++ b/drivers/net/ethernet/stmicro/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_STMICRO bool "STMicroelectronics devices" + default y depends on HAS_IOMEM ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig index 5132fa69047a..57bfd8599679 100644 --- a/drivers/net/ethernet/sun/Kconfig +++ b/drivers/net/ethernet/sun/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_SUN bool "Sun devices" + default y depends on SUN3 || SBUS || PCI || SUN_LDOMS ---help--- If you have a network (Ethernet) card belonging to this class, say diff --git a/drivers/net/ethernet/tehuti/Kconfig b/drivers/net/ethernet/tehuti/Kconfig index 914ad4059eae..1fc027eda33e 100644 --- a/drivers/net/ethernet/tehuti/Kconfig +++ b/drivers/net/ethernet/tehuti/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_TEHUTI bool "Tehuti devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig index 1284319ba7e0..de76c70ec8fb 100644 --- a/drivers/net/ethernet/ti/Kconfig +++ b/drivers/net/ethernet/ti/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_TI bool "Texas Instruments (TI) devices" + default y depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3)) ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig index 6ef2ce2c0ea7..051764704559 100644 --- a/drivers/net/ethernet/toshiba/Kconfig +++ b/drivers/net/ethernet/toshiba/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_TOSHIBA bool "Toshiba devices" + default y depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3 ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/tundra/Kconfig b/drivers/net/ethernet/tundra/Kconfig index 03925d1aecb2..cf7d69b62c42 100644 --- a/drivers/net/ethernet/tundra/Kconfig +++ b/drivers/net/ethernet/tundra/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_TUNDRA bool "Tundra devices" + default y depends on TSI108_BRIDGE ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig index 7199194fa898..e5d82a53ea57 100644 --- a/drivers/net/ethernet/via/Kconfig +++ b/drivers/net/ethernet/via/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_VIA bool "VIA devices" + default y depends on PCI ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index 4e3aad401cd8..d5a826063a82 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_XILINX bool "Xilinx devices" + default y depends on PPC || PPC32 || MICROBLAZE ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig index 3d64e58e3f8b..69f56a6de821 100644 --- a/drivers/net/ethernet/xircom/Kconfig +++ b/drivers/net/ethernet/xircom/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_XIRCOM bool "Xircom devices" + default y depends on PCMCIA ---help--- If you have a network (Ethernet) card belonging to this class, say Y diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig index 6bbcc54d6ce7..cf67352cea14 100644 --- a/drivers/net/ethernet/xscale/Kconfig +++ b/drivers/net/ethernet/xscale/Kconfig @@ -4,6 +4,7 @@ config NET_VENDOR_XSCALE bool "Intel XScale IXP devices" + default y depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \ IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611) ---help--- diff --git a/drivers/net/fddi/Kconfig b/drivers/net/fddi/Kconfig new file mode 100644 index 000000000000..3a424c864f4d --- /dev/null +++ b/drivers/net/fddi/Kconfig @@ -0,0 +1,77 @@ +# +# FDDI network device configuration +# + +config FDDI + tristate "FDDI driver support" + depends on PCI || EISA || TC + ---help--- + Fiber Distributed Data Interface is a high speed local area network + design; essentially a replacement for high speed Ethernet. FDDI can + run over copper or fiber. If you are connected to such a network and + want a driver for the FDDI card in your computer, say Y here (and + then also Y to the driver for your FDDI card, below). Most people + will say N. + +if FDDI + +config DEFXX + tristate "Digital DEFTA/DEFEA/DEFPA adapter support" + depends on FDDI && (PCI || EISA || TC) + ---help--- + This is support for the DIGITAL series of TURBOchannel (DEFTA), + EISA (DEFEA) and PCI (DEFPA) controllers which can connect you + to a local FDDI network. + + To compile this driver as a module, choose M here: the module + will be called defxx. If unsure, say N. + +config DEFXX_MMIO + bool + prompt "Use MMIO instead of PIO" if PCI || EISA + depends on DEFXX + default n if PCI || EISA + default y + ---help--- + This instructs the driver to use EISA or PCI memory-mapped I/O + (MMIO) as appropriate instead of programmed I/O ports (PIO). + Enabling this gives an improvement in processing time in parts + of the driver, but it may cause problems with EISA (DEFEA) + adapters. TURBOchannel does not have the concept of I/O ports, + so MMIO is always used for these (DEFTA) adapters. + + If unsure, say N. + +config SKFP + tristate "SysKonnect FDDI PCI support" + depends on FDDI && PCI + select BITREVERSE + ---help--- + Say Y here if you have a SysKonnect FDDI PCI adapter. + The following adapters are supported by this driver: + - SK-5521 (SK-NET FDDI-UP) + - SK-5522 (SK-NET FDDI-UP DAS) + - SK-5541 (SK-NET FDDI-FP) + - SK-5543 (SK-NET FDDI-LP) + - SK-5544 (SK-NET FDDI-LP DAS) + - SK-5821 (SK-NET FDDI-UP64) + - SK-5822 (SK-NET FDDI-UP64 DAS) + - SK-5841 (SK-NET FDDI-FP64) + - SK-5843 (SK-NET FDDI-LP64) + - SK-5844 (SK-NET FDDI-LP64 DAS) + - Netelligent 100 FDDI DAS Fibre SC + - Netelligent 100 FDDI SAS Fibre SC + - Netelligent 100 FDDI DAS UTP + - Netelligent 100 FDDI SAS UTP + - Netelligent 100 FDDI SAS Fibre MIC + + Read <file:Documentation/networking/skfp.txt> for information about + the driver. + + Questions concerning this driver can be addressed to: + <linux@syskonnect.de> + + To compile this driver as a module, choose M here: the module + will be called skfp. This is recommended. + +endif # FDDI diff --git a/drivers/net/fddi/Makefile b/drivers/net/fddi/Makefile new file mode 100644 index 000000000000..36da19c9a8aa --- /dev/null +++ b/drivers/net/fddi/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Linux FDDI network device drivers. +# + +obj-$(CONFIG_DEFXX) += defxx.o +obj-$(CONFIG_SKFP) += skfp/ diff --git a/drivers/net/defxx.c b/drivers/net/fddi/defxx.c index 4ad80f771099..4ad80f771099 100644 --- a/drivers/net/defxx.c +++ b/drivers/net/fddi/defxx.c diff --git a/drivers/net/defxx.h b/drivers/net/fddi/defxx.h index 19a6f64df198..19a6f64df198 100644 --- a/drivers/net/defxx.h +++ b/drivers/net/fddi/defxx.h diff --git a/drivers/net/skfp/Makefile b/drivers/net/fddi/skfp/Makefile index b0be0234abf6..b0be0234abf6 100644 --- a/drivers/net/skfp/Makefile +++ b/drivers/net/fddi/skfp/Makefile diff --git a/drivers/net/skfp/cfm.c b/drivers/net/fddi/skfp/cfm.c index e395ace3120b..e395ace3120b 100644 --- a/drivers/net/skfp/cfm.c +++ b/drivers/net/fddi/skfp/cfm.c diff --git a/drivers/net/skfp/drvfbi.c b/drivers/net/fddi/skfp/drvfbi.c index 07da97c303d6..07da97c303d6 100644 --- a/drivers/net/skfp/drvfbi.c +++ b/drivers/net/fddi/skfp/drvfbi.c diff --git a/drivers/net/skfp/ecm.c b/drivers/net/fddi/skfp/ecm.c index 47d922cb3c08..47d922cb3c08 100644 --- a/drivers/net/skfp/ecm.c +++ b/drivers/net/fddi/skfp/ecm.c diff --git a/drivers/net/skfp/ess.c b/drivers/net/fddi/skfp/ess.c index 2fc5987b41dc..2fc5987b41dc 100644 --- a/drivers/net/skfp/ess.c +++ b/drivers/net/fddi/skfp/ess.c diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/fddi/skfp/fplustm.c index a20ed1a98099..a20ed1a98099 100644 --- a/drivers/net/skfp/fplustm.c +++ b/drivers/net/fddi/skfp/fplustm.c diff --git a/drivers/net/skfp/h/cmtdef.h b/drivers/net/fddi/skfp/h/cmtdef.h index 5a6c6122ccb0..f5bc90ff2a2a 100644 --- a/drivers/net/skfp/h/cmtdef.h +++ b/drivers/net/fddi/skfp/h/cmtdef.h @@ -477,8 +477,8 @@ struct s_plc { /* * function prototypes */ -#include "h/mbuf.h" /* Type definitions for MBUFs */ -#include "h/smtstate.h" /* struct smt_state */ +#include "mbuf.h" /* Type definitions for MBUFs */ +#include "smtstate.h" /* struct smt_state */ void hwt_restart(struct s_smc *smc); /* hwt.c */ SMbuf *smt_build_frame(struct s_smc *smc, int class, int type, diff --git a/drivers/net/skfp/h/fddi.h b/drivers/net/fddi/skfp/h/fddi.h index c9a28a8a383b..c9a28a8a383b 100644 --- a/drivers/net/skfp/h/fddi.h +++ b/drivers/net/fddi/skfp/h/fddi.h diff --git a/drivers/net/skfp/h/fddimib.h b/drivers/net/fddi/skfp/h/fddimib.h index d1acdc773950..d1acdc773950 100644 --- a/drivers/net/skfp/h/fddimib.h +++ b/drivers/net/fddi/skfp/h/fddimib.h diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/fddi/skfp/h/fplustm.h index d43191ed938b..d43191ed938b 100644 --- a/drivers/net/skfp/h/fplustm.h +++ b/drivers/net/fddi/skfp/h/fplustm.h diff --git a/drivers/net/skfp/h/hwmtm.h b/drivers/net/fddi/skfp/h/hwmtm.h index e1a7e5f683dc..5924d4219e9e 100644 --- a/drivers/net/skfp/h/hwmtm.h +++ b/drivers/net/fddi/skfp/h/hwmtm.h @@ -15,7 +15,7 @@ #ifndef _HWM_ #define _HWM_ -#include "h/mbuf.h" +#include "mbuf.h" /* * MACRO for DMA synchronization: diff --git a/drivers/net/skfp/h/mbuf.h b/drivers/net/fddi/skfp/h/mbuf.h index f2aadcda9e7f..f2aadcda9e7f 100644 --- a/drivers/net/skfp/h/mbuf.h +++ b/drivers/net/fddi/skfp/h/mbuf.h diff --git a/drivers/net/skfp/h/osdef1st.h b/drivers/net/fddi/skfp/h/osdef1st.h index 763ca18cbea8..763ca18cbea8 100644 --- a/drivers/net/skfp/h/osdef1st.h +++ b/drivers/net/fddi/skfp/h/osdef1st.h diff --git a/drivers/net/skfp/h/sba.h b/drivers/net/fddi/skfp/h/sba.h index 638cf0283bc4..35ddb44a1120 100644 --- a/drivers/net/skfp/h/sba.h +++ b/drivers/net/fddi/skfp/h/sba.h @@ -19,8 +19,8 @@ #ifndef _SBA_ #define _SBA_ -#include "h/mbuf.h" -#include "h/sba_def.h" +#include "mbuf.h" +#include "sba_def.h" #ifdef SBA diff --git a/drivers/net/skfp/h/sba_def.h b/drivers/net/fddi/skfp/h/sba_def.h index 0459a095d0cd..0459a095d0cd 100644 --- a/drivers/net/skfp/h/sba_def.h +++ b/drivers/net/fddi/skfp/h/sba_def.h diff --git a/drivers/net/skfp/h/skfbi.h b/drivers/net/fddi/skfp/h/skfbi.h index c1ba26c06d73..c1ba26c06d73 100644 --- a/drivers/net/skfp/h/skfbi.h +++ b/drivers/net/fddi/skfp/h/skfbi.h diff --git a/drivers/net/skfp/h/skfbiinc.h b/drivers/net/fddi/skfp/h/skfbiinc.h index ac2d7192f1ca..ce72557c354c 100644 --- a/drivers/net/skfp/h/skfbiinc.h +++ b/drivers/net/fddi/skfp/h/skfbiinc.h @@ -15,7 +15,7 @@ #ifndef _SKFBIINC_ #define _SKFBIINC_ -#include "h/supern_2.h" +#include "supern_2.h" /* * special defines for use into .asm files diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/fddi/skfp/h/smc.h index c774a95902f5..3ca308b28214 100644 --- a/drivers/net/skfp/h/smc.h +++ b/drivers/net/fddi/skfp/h/smc.h @@ -38,18 +38,18 @@ * fddi.h */ #ifdef OSDEF -#include "h/osdef1st.h" +#include "osdef1st.h" #endif /* OSDEF */ #ifdef OEM_CONCEPT #include "oemdef.h" #endif /* OEM_CONCEPT */ -#include "h/smt.h" -#include "h/cmtdef.h" -#include "h/fddimib.h" -#include "h/targethw.h" /* all target hw dependencies */ -#include "h/targetos.h" /* all target os dependencies */ +#include "smt.h" +#include "cmtdef.h" +#include "fddimib.h" +#include "targethw.h" /* all target hw dependencies */ +#include "targetos.h" /* all target os dependencies */ #ifdef ESS -#include "h/sba.h" +#include "sba.h" #endif /* diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/fddi/skfp/h/smt.h index 2030f9cbb24b..2030f9cbb24b 100644 --- a/drivers/net/skfp/h/smt.h +++ b/drivers/net/fddi/skfp/h/smt.h diff --git a/drivers/net/skfp/h/smt_p.h b/drivers/net/fddi/skfp/h/smt_p.h index 99f9be9552bb..99f9be9552bb 100644 --- a/drivers/net/skfp/h/smt_p.h +++ b/drivers/net/fddi/skfp/h/smt_p.h diff --git a/drivers/net/skfp/h/smtstate.h b/drivers/net/fddi/skfp/h/smtstate.h index 62fe695077a9..62fe695077a9 100644 --- a/drivers/net/skfp/h/smtstate.h +++ b/drivers/net/fddi/skfp/h/smtstate.h diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/fddi/skfp/h/supern_2.h index 0b73690280f6..0b73690280f6 100644 --- a/drivers/net/skfp/h/supern_2.h +++ b/drivers/net/fddi/skfp/h/supern_2.h diff --git a/drivers/net/skfp/h/targethw.h b/drivers/net/fddi/skfp/h/targethw.h index 626dc7263591..842a690446f3 100644 --- a/drivers/net/skfp/h/targethw.h +++ b/drivers/net/fddi/skfp/h/targethw.h @@ -25,11 +25,11 @@ #define SK_ML_ID_2 0x30 #endif -#include "h/skfbi.h" +#include "skfbi.h" #ifndef TAG_MODE -#include "h/fplus.h" +#include "fplus.h" #else -#include "h/fplustm.h" +#include "fplustm.h" #endif #ifndef HW_PTR diff --git a/drivers/net/skfp/h/targetos.h b/drivers/net/fddi/skfp/h/targetos.h index 5d940e7b8ea0..53bacc107160 100644 --- a/drivers/net/skfp/h/targetos.h +++ b/drivers/net/fddi/skfp/h/targetos.h @@ -58,7 +58,7 @@ #define ADDR(a) (((a)>>7) ? (outp(smc->hw.iop+B0_RAP,(a)>>7), (smc->hw.iop+( ((a)&0x7F) | ((a)>>7 ? 0x80:0)) )) : (smc->hw.iop+(((a)&0x7F)|((a)>>7 ? 0x80:0)))) #endif -#include "h/hwmtm.h" +#include "hwmtm.h" #define TRUE 1 #define FALSE 0 diff --git a/drivers/net/skfp/h/types.h b/drivers/net/fddi/skfp/h/types.h index 5a3bf8378f9e..5a3bf8378f9e 100644 --- a/drivers/net/skfp/h/types.h +++ b/drivers/net/fddi/skfp/h/types.h diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/fddi/skfp/hwmtm.c index e26398b5a7dc..e26398b5a7dc 100644 --- a/drivers/net/skfp/hwmtm.c +++ b/drivers/net/fddi/skfp/hwmtm.c diff --git a/drivers/net/skfp/hwt.c b/drivers/net/fddi/skfp/hwt.c index c0798fd2ca69..c0798fd2ca69 100644 --- a/drivers/net/skfp/hwt.c +++ b/drivers/net/fddi/skfp/hwt.c diff --git a/drivers/net/skfp/pcmplc.c b/drivers/net/fddi/skfp/pcmplc.c index 88d02d0a42c4..88d02d0a42c4 100644 --- a/drivers/net/skfp/pcmplc.c +++ b/drivers/net/fddi/skfp/pcmplc.c diff --git a/drivers/net/skfp/pmf.c b/drivers/net/fddi/skfp/pmf.c index 9ac4665d7411..9ac4665d7411 100644 --- a/drivers/net/skfp/pmf.c +++ b/drivers/net/fddi/skfp/pmf.c diff --git a/drivers/net/skfp/queue.c b/drivers/net/fddi/skfp/queue.c index c1a0df455a59..c1a0df455a59 100644 --- a/drivers/net/skfp/queue.c +++ b/drivers/net/fddi/skfp/queue.c diff --git a/drivers/net/skfp/rmt.c b/drivers/net/fddi/skfp/rmt.c index ef8d5672d9e8..ef8d5672d9e8 100644 --- a/drivers/net/skfp/rmt.c +++ b/drivers/net/fddi/skfp/rmt.c diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/fddi/skfp/skfddi.c index 3d9a4596a423..3d9a4596a423 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/fddi/skfp/skfddi.c diff --git a/drivers/net/skfp/smt.c b/drivers/net/fddi/skfp/smt.c index 08d94329c12f..08d94329c12f 100644 --- a/drivers/net/skfp/smt.c +++ b/drivers/net/fddi/skfp/smt.c diff --git a/drivers/net/skfp/smtdef.c b/drivers/net/fddi/skfp/smtdef.c index 1acab0b368e3..1acab0b368e3 100644 --- a/drivers/net/skfp/smtdef.c +++ b/drivers/net/fddi/skfp/smtdef.c diff --git a/drivers/net/skfp/smtinit.c b/drivers/net/fddi/skfp/smtinit.c index e3a0c0bc2233..e3a0c0bc2233 100644 --- a/drivers/net/skfp/smtinit.c +++ b/drivers/net/fddi/skfp/smtinit.c diff --git a/drivers/net/skfp/smttimer.c b/drivers/net/fddi/skfp/smttimer.c index 531795e98c30..531795e98c30 100644 --- a/drivers/net/skfp/smttimer.c +++ b/drivers/net/fddi/skfp/smttimer.c diff --git a/drivers/net/skfp/srf.c b/drivers/net/fddi/skfp/srf.c index f6f7baf9f27a..f6f7baf9f27a 100644 --- a/drivers/net/skfp/srf.c +++ b/drivers/net/fddi/skfp/srf.c diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig new file mode 100644 index 000000000000..7393eb732ee6 --- /dev/null +++ b/drivers/net/hippi/Kconfig @@ -0,0 +1,39 @@ +# +# HIPPI network device configuration +# + +config HIPPI + bool "HIPPI driver support (EXPERIMENTAL)" + depends on EXPERIMENTAL && INET && PCI + ---help--- + HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and + 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI + can run over copper (25m) or fiber (300m on multi-mode or 10km on + single-mode). HIPPI networks are commonly used for clusters and to + connect to super computers. If you are connected to a HIPPI network + and have a HIPPI network card in your computer that you want to use + under Linux, say Y here (you must also remember to enable the driver + for your HIPPI card below). Most people will say N here. + +if HIPPI + +config ROADRUNNER + tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)" + depends on PCI + ---help--- + Say Y here if this is your PCI HIPPI network card. + + To compile this driver as a module, choose M here: the module + will be called rrunner. If unsure, say N. + +config ROADRUNNER_LARGE_RINGS + bool "Use large TX/RX rings (EXPERIMENTAL)" + depends on ROADRUNNER + ---help--- + If you say Y here, the RoadRunner driver will preallocate up to 2 MB + of additional memory to allow for fastest operation, both for + transmitting and receiving. This memory cannot be used by any other + kernel code or by user space programs. Say Y here only if you have + the memory. + +endif /* HIPPI */ diff --git a/drivers/net/hippi/Makefile b/drivers/net/hippi/Makefile new file mode 100644 index 000000000000..b95d629baee5 --- /dev/null +++ b/drivers/net/hippi/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the HIPPI network device drivers. +# + +obj-$(CONFIG_ROADRUNNER) += rrunner.o diff --git a/drivers/net/rrunner.c b/drivers/net/hippi/rrunner.c index e68c941926f1..e68c941926f1 100644 --- a/drivers/net/rrunner.c +++ b/drivers/net/hippi/rrunner.c diff --git a/drivers/net/rrunner.h b/drivers/net/hippi/rrunner.h index 28169043ae49..28169043ae49 100644 --- a/drivers/net/rrunner.h +++ b/drivers/net/hippi/rrunner.h diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig deleted file mode 100644 index 12e7ae47c066..000000000000 --- a/drivers/net/pcmcia/Kconfig +++ /dev/null @@ -1,45 +0,0 @@ -# -# PCMCIA Network device configuration -# - -menuconfig NET_PCMCIA - bool "PCMCIA network device support" - depends on PCMCIA - ---help--- - Say Y if you would like to include support for any PCMCIA or CardBus - network adapters, then say Y to the driver for your particular card - below. PCMCIA- or PC-cards are credit-card size devices often used - with laptops computers; CardBus is the newer and faster version of - PCMCIA. - - To use your PC-cards, you will need supporting software from David - Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> - for location). You also want to check out the PCMCIA-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - If unsure, say N. - -if NET_PCMCIA && PCMCIA - -config ARCNET_COM20020_CS - tristate "COM20020 ARCnet PCMCIA support" - depends on ARCNET_COM20020 - help - Say Y here if you intend to attach this type of ARCnet PCMCIA card - to your computer. - - To compile this driver as a module, choose M here: the module will be - called com20020_cs. If unsure, say N. - -config PCMCIA_IBMTR - tristate "IBM PCMCIA tokenring adapter support" - depends on IBMTR!=y && TR - help - Say Y here if you intend to attach this type of Token Ring PCMCIA - card to your computer. You then also need to say Y to "Token Ring - driver support". - - To compile this driver as a module, choose M here: the module will be - called ibmtr_cs. - -endif # NET_PCMCIA diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile deleted file mode 100644 index 618e81667ca0..000000000000 --- a/drivers/net/pcmcia/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Linux PCMCIA network device drivers. -# - -# 16-bit client drivers -obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o - -obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index a70244306c94..bb88e12101c7 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -3,7 +3,7 @@ # menuconfig PHYLIB - tristate "PHY Device support and infrastructure" + bool "PHY Device support and infrastructure" depends on !S390 depends on NETDEVICES help diff --git a/drivers/net/plip/Kconfig b/drivers/net/plip/Kconfig new file mode 100644 index 000000000000..80c4a3373e51 --- /dev/null +++ b/drivers/net/plip/Kconfig @@ -0,0 +1,38 @@ +# +# Parallel Line Internet Protocol (PLIP) network device configuration +# + +config PLIP + tristate "PLIP (parallel port) support" + depends on PARPORT + ---help--- + PLIP (Parallel Line Internet Protocol) is used to create a + reasonably fast mini network consisting of two (or, rarely, more) + local machines. A PLIP link from a Linux box is a popular means to + install a Linux distribution on a machine which doesn't have a + CD-ROM drive (a minimal system has to be transferred with floppies + first). The kernels on both machines need to have this PLIP option + enabled for this to work. + + The PLIP driver has two modes, mode 0 and mode 1. The parallel + ports (the connectors at the computers with 25 holes) are connected + with "null printer" or "Turbo Laplink" cables which can transmit 4 + bits at a time (mode 0) or with special PLIP cables, to be used on + bidirectional parallel ports only, which can transmit 8 bits at a + time (mode 1); you can find the wiring of these cables in + <file:Documentation/networking/PLIP.txt>. The cables can be up to + 15m long. Mode 0 works also if one of the machines runs DOS/Windows + and has some PLIP software installed, e.g. the Crynwr PLIP packet + driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>) + and winsock or NCSA's telnet. + + If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well + as the NET-3-HOWTO, both available from + <http://www.tldp.org/docs.html#howto>. Note that the PLIP + protocol has been changed and this PLIP driver won't work together + with the PLIP support in Linux versions 1.0.x. This option enlarges + your kernel by about 8 KB. + + To compile this driver as a module, choose M here. The module + will be called plip. If unsure, say Y or M, in case you buy + a laptop later. diff --git a/drivers/net/plip/Makefile b/drivers/net/plip/Makefile new file mode 100644 index 000000000000..ed958796dc64 --- /dev/null +++ b/drivers/net/plip/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the PLIP network device drivers. +# + +obj-$(CONFIG_PLIP) += plip.o diff --git a/drivers/net/plip.c b/drivers/net/plip/plip.c index a9e9ca8a86ed..a9e9ca8a86ed 100644 --- a/drivers/net/plip.c +++ b/drivers/net/plip/plip.c diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig new file mode 100644 index 000000000000..872df3ef07a6 --- /dev/null +++ b/drivers/net/ppp/Kconfig @@ -0,0 +1,175 @@ +# +# PPP network device configuration +# + +config PPP + tristate "PPP (point-to-point protocol) support" + select SLHC + ---help--- + PPP (Point to Point Protocol) is a newer and better SLIP. It serves + the same purpose: sending Internet traffic over telephone (and other + serial) lines. Ask your access provider if they support it, because + otherwise you can't use it; most Internet access providers these + days support PPP rather than SLIP. + + To use PPP, you need an additional program called pppd as described + in the PPP-HOWTO, available at + <http://www.tldp.org/docs.html#howto>. Make sure that you have + the version of pppd recommended in <file:Documentation/Changes>. + The PPP option enlarges your kernel by about 16 KB. + + There are actually two versions of PPP: the traditional PPP for + asynchronous lines, such as regular analog phone lines, and + synchronous PPP which can be used over digital ISDN lines for + example. If you want to use PPP over phone lines or other + asynchronous serial lines, you need to say Y (or M) here and also to + the next option, "PPP support for async serial ports". For PPP over + synchronous lines, you should say Y (or M) here and to "Support + synchronous PPP", below. + + If you said Y to "Version information on all symbols" above, then + you cannot compile the PPP driver into the kernel; you can then only + compile it as a module. To compile this driver as a module, choose M + here. The module will be called ppp_generic. + +if PPP + +config PPP_BSDCOMP + tristate "PPP BSD-Compress compression" + depends on PPP + ---help--- + Support for the BSD-Compress compression method for PPP, which uses + the LZW compression method to compress each PPP packet before it is + sent over the wire. The machine at the other end of the PPP link + (usually your ISP) has to support the BSD-Compress compression + method as well for this to be useful. Even if they don't support it, + it is safe to say Y here. + + The PPP Deflate compression method ("PPP Deflate compression", + above) is preferable to BSD-Compress, because it compresses better + and is patent-free. + + Note that the BSD compression code will always be compiled as a + module; it is called bsd_comp and will show up in the directory + modules once you have said "make modules". If unsure, say N. + +config PPP_DEFLATE + tristate "PPP Deflate compression" + depends on PPP + select ZLIB_INFLATE + select ZLIB_DEFLATE + ---help--- + Support for the Deflate compression method for PPP, which uses the + Deflate algorithm (the same algorithm that gzip uses) to compress + each PPP packet before it is sent over the wire. The machine at the + other end of the PPP link (usually your ISP) has to support the + Deflate compression method as well for this to be useful. Even if + they don't support it, it is safe to say Y here. + + To compile this driver as a module, choose M here. + +config PPP_FILTER + bool "PPP filtering" + depends on PPP + ---help--- + Say Y here if you want to be able to filter the packets passing over + PPP interfaces. This allows you to control which packets count as + activity (i.e. which packets will reset the idle timer or bring up + a demand-dialed link) and which packets are to be dropped entirely. + You need to say Y here if you wish to use the pass-filter and + active-filter options to pppd. + + If unsure, say N. + +config PPP_MPPE + tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)" + depends on PPP && EXPERIMENTAL + select CRYPTO + select CRYPTO_SHA1 + select CRYPTO_ARC4 + select CRYPTO_ECB + ---help--- + Support for the MPPE Encryption protocol, as employed by the + Microsoft Point-to-Point Tunneling Protocol. + + See http://pptpclient.sourceforge.net/ for information on + configuring PPTP clients and servers to utilize this method. + +config PPP_MULTILINK + bool "PPP multilink support (EXPERIMENTAL)" + depends on PPP && EXPERIMENTAL + ---help--- + PPP multilink is a protocol (defined in RFC 1990) which allows you + to combine several (logical or physical) lines into one logical PPP + connection, so that you can utilize your full bandwidth. + + This has to be supported at the other end as well and you need a + version of the pppd daemon which understands the multilink protocol. + + If unsure, say N. + +config PPPOATM + tristate "PPP over ATM" + depends on ATM && PPP + ---help--- + Support PPP (Point to Point Protocol) encapsulated in ATM frames. + This implementation does not yet comply with section 8 of RFC2364, + which can lead to bad results if the ATM peer loses state and + changes its encapsulation unilaterally. + +config PPPOE + tristate "PPP over Ethernet (EXPERIMENTAL)" + depends on EXPERIMENTAL && PPP + ---help--- + Support for PPP over Ethernet. + + This driver requires the latest version of pppd from the CVS + repository at cvs.samba.org. Alternatively, see the + RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>) + which contains instruction on how to use this driver (under + the heading "Kernel mode PPPoE"). + +config PPTP + tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)" + depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX + ---help--- + Support for PPP over IPv4.(Point-to-Point Tunneling Protocol) + + This driver requires pppd plugin to work in client mode or + modified pptpd (poptop) to work in server mode. + See http://accel-pptp.sourceforge.net/ for information how to + utilize this module. + +config PPPOL2TP + tristate "PPP over L2TP (EXPERIMENTAL)" + depends on EXPERIMENTAL && L2TP && PPP + ---help--- + Support for PPP-over-L2TP socket family. L2TP is a protocol + used by ISPs and enterprises to tunnel PPP traffic over UDP + tunnels. L2TP is replacing PPTP for VPN uses. + +config PPP_ASYNC + tristate "PPP support for async serial ports" + depends on PPP + select CRC_CCITT + ---help--- + Say Y (or M) here if you want to be able to use PPP over standard + asynchronous serial ports, such as COM1 or COM2 on a PC. If you use + a modem (not a synchronous or ISDN modem) to contact your ISP, you + need this option. + + To compile this driver as a module, choose M here. + + If unsure, say Y. + +config PPP_SYNC_TTY + tristate "PPP support for sync tty ports" + depends on PPP + ---help--- + Say Y (or M) here if you want to be able to use PPP over synchronous + (HDLC) tty devices, such as the SyncLink adapter. These devices + are often used for high-speed leased lines like T1/E1. + + To compile this driver as a module, choose M here. + +endif # PPP diff --git a/drivers/net/ppp/Makefile b/drivers/net/ppp/Makefile new file mode 100644 index 000000000000..a6b6297b0066 --- /dev/null +++ b/drivers/net/ppp/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the Linux PPP network device drivers. +# + +obj-$(CONFIG_PPP) += ppp_generic.o +obj-$(CONFIG_PPP_ASYNC) += ppp_async.o +obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o +obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o +obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o +obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o +obj-$(CONFIG_PPPOE) += pppox.o pppoe.o +obj-$(CONFIG_PPPOL2TP) += pppox.o +obj-$(CONFIG_PPTP) += pppox.o pptp.o diff --git a/drivers/net/bsd_comp.c b/drivers/net/ppp/bsd_comp.c index a9b759add187..a9b759add187 100644 --- a/drivers/net/bsd_comp.c +++ b/drivers/net/ppp/bsd_comp.c diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp/ppp_async.c index c6ba64380829..c6ba64380829 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp/ppp_async.c diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp/ppp_deflate.c index 1dbdf82a6dfd..1dbdf82a6dfd 100644 --- a/drivers/net/ppp_deflate.c +++ b/drivers/net/ppp/ppp_deflate.c diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 10e5d985afa3..10e5d985afa3 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp/ppp_mppe.c index 9a1849a83e2a..9a1849a83e2a 100644 --- a/drivers/net/ppp_mppe.c +++ b/drivers/net/ppp/ppp_mppe.c diff --git a/drivers/net/ppp_mppe.h b/drivers/net/ppp/ppp_mppe.h index 7a14e058c668..7a14e058c668 100644 --- a/drivers/net/ppp_mppe.h +++ b/drivers/net/ppp/ppp_mppe.h diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index 736a39ee05bb..736a39ee05bb 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c diff --git a/drivers/net/pppoe.c b/drivers/net/ppp/pppoe.c index bc9a4bb31980..bc9a4bb31980 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/ppp/pppoe.c diff --git a/drivers/net/pppox.c b/drivers/net/ppp/pppox.c index 8c0d170dabcd..8c0d170dabcd 100644 --- a/drivers/net/pppox.c +++ b/drivers/net/ppp/pppox.c diff --git a/drivers/net/pptp.c b/drivers/net/ppp/pptp.c index eae542a7e987..eae542a7e987 100644 --- a/drivers/net/pptp.c +++ b/drivers/net/ppp/pptp.c diff --git a/drivers/net/slip/Kconfig b/drivers/net/slip/Kconfig new file mode 100644 index 000000000000..211b160e4e9c --- /dev/null +++ b/drivers/net/slip/Kconfig @@ -0,0 +1,79 @@ +# +# SLIP network device configuration +# + +config SLIP + tristate "SLIP (serial line) support" + ---help--- + Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to + connect to your Internet service provider or to connect to some + other local Unix box or if you want to configure your Linux box as a + Slip/CSlip server for other people to dial in. SLIP (Serial Line + Internet Protocol) is a protocol used to send Internet traffic over + serial connections such as telephone lines or null modem cables; + nowadays, the protocol PPP is more commonly used for this same + purpose. + + Normally, your access provider has to support SLIP in order for you + to be able to use it, but there is now a SLIP emulator called SLiRP + around (available from + <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which + allows you to use SLIP over a regular dial up shell connection. If + you plan to use SLiRP, make sure to say Y to CSLIP, below. The + NET-3-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, explains how to + configure SLIP. Note that you don't need this option if you just + want to run term (term is a program which gives you almost full + Internet connectivity if you have a regular dial up shell account on + some Internet connected Unix computer. Read + <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP + support will enlarge your kernel by about 4 KB. If unsure, say N. + + To compile this driver as a module, choose M here. The module + will be called slip. + +config SLHC + tristate + ---help--- + This option enables Van Jacobsen serial line header compression + routines. + +if SLIP + +config SLIP_COMPRESSED + bool "CSLIP compressed headers" + depends on SLIP + select SLHC + ---help--- + This protocol is faster than SLIP because it uses compression on the + TCP/IP headers (not on the data itself), but it has to be supported + on both ends. Ask your access provider if you are not sure and + answer Y, just in case. You will still be able to use plain SLIP. If + you plan to use SLiRP, the SLIP emulator (available from + <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which + allows you to use SLIP over a regular dial up shell connection, you + definitely want to say Y here. The NET-3-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, explains how to configure + CSLIP. This won't enlarge your kernel. + +config SLIP_SMART + bool "Keepalive and linefill" + depends on SLIP + ---help--- + Adds additional capabilities to the SLIP driver to support the + RELCOM line fill and keepalive monitoring. Ideal on poor quality + analogue lines. + +config SLIP_MODE_SLIP6 + bool "Six bit SLIP encapsulation" + depends on SLIP + ---help--- + Just occasionally you may need to run IP over hostile serial + networks that don't pass all control characters or are only seven + bit. Saying Y here adds an extra mode you can use with SLIP: + "slip6". In this mode, SLIP will only send normal ASCII symbols over + the serial device. Naturally, this has to be supported at the other + end of the link as well. It's good enough, for example, to run IP + over the async ports of a Camtec JNT Pad. If unsure, say N. + +endif # SLIP diff --git a/drivers/net/slip/Makefile b/drivers/net/slip/Makefile new file mode 100644 index 000000000000..e3ebc59e6fb9 --- /dev/null +++ b/drivers/net/slip/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SLIP network device drivers. +# + +obj-$(CONFIG_SLIP) += slip.o +obj-$(CONFIG_SLHC) += slhc.o diff --git a/drivers/net/slhc.c b/drivers/net/slip/slhc.c index 0a0a6643cf3a..0a0a6643cf3a 100644 --- a/drivers/net/slhc.c +++ b/drivers/net/slip/slhc.c diff --git a/drivers/net/slip.c b/drivers/net/slip/slip.c index ba08341fb92c..ba08341fb92c 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip/slip.c diff --git a/drivers/net/slip.h b/drivers/net/slip/slip.h index 67673cf1266b..67673cf1266b 100644 --- a/drivers/net/slip.h +++ b/drivers/net/slip/slip.h diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig index c4137b0f808e..c7e0149d1514 100644 --- a/drivers/net/tokenring/Kconfig +++ b/drivers/net/tokenring/Kconfig @@ -4,9 +4,9 @@ # So far, we only have PCI, ISA, and MCA token ring devices menuconfig TR - tristate "Token Ring driver support" + bool "Token Ring driver support" depends on NETDEVICES && !UML - depends on (PCI || ISA || MCA || CCW) + depends on (PCI || ISA || MCA || CCW || PCMCIA) select LLC help Token Ring is IBM's way of communication on a local network; the @@ -20,6 +20,17 @@ menuconfig TR if TR +config PCMCIA_IBMTR + tristate "IBM PCMCIA tokenring adapter support" + depends on IBMTR!=y && PCMCIA + ---help--- + Say Y here if you intend to attach this type of Token Ring PCMCIA + card to your computer. You then also need to say Y to "Token Ring + driver support". + + To compile this driver as a module, choose M here: the module will be + called ibmtr_cs. + config IBMTR tristate "IBM Tropic chipset based adapter support" depends on ISA || MCA diff --git a/drivers/net/tokenring/Makefile b/drivers/net/tokenring/Makefile index c88b0a5e5380..f1be8d97b7a8 100644 --- a/drivers/net/tokenring/Makefile +++ b/drivers/net/tokenring/Makefile @@ -2,14 +2,15 @@ # Makefile for drivers/net/tokenring # -obj-$(CONFIG_IBMTR) += ibmtr.o -obj-$(CONFIG_IBMOL) += olympic.o -obj-$(CONFIG_IBMLS) += lanstreamer.o -obj-$(CONFIG_TMS380TR) += tms380tr.o -obj-$(CONFIG_ABYSS) += abyss.o -obj-$(CONFIG_MADGEMC) += madgemc.o -obj-$(CONFIG_PROTEON) += proteon.o -obj-$(CONFIG_TMSPCI) += tmspci.o -obj-$(CONFIG_SKISA) += skisa.o -obj-$(CONFIG_SMCTR) += smctr.o +obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o +obj-$(CONFIG_IBMTR) += ibmtr.o +obj-$(CONFIG_IBMOL) += olympic.o +obj-$(CONFIG_IBMLS) += lanstreamer.o +obj-$(CONFIG_TMS380TR) += tms380tr.o +obj-$(CONFIG_ABYSS) += abyss.o +obj-$(CONFIG_MADGEMC) += madgemc.o +obj-$(CONFIG_PROTEON) += proteon.o +obj-$(CONFIG_TMSPCI) += tmspci.o +obj-$(CONFIG_SKISA) += skisa.o +obj-$(CONFIG_SMCTR) += smctr.o obj-$(CONFIG_3C359) += 3c359.o diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c index 6006d5488fbe..91b684630fc5 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/tokenring/ibmtr_cs.c @@ -66,7 +66,7 @@ #include <asm/system.h> #define PCMCIA -#include "../tokenring/ibmtr.c" +#include "ibmtr.c" /*====================================================================*/ |