summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-10-07 14:12:21 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-10-07 14:12:21 -0700
commit87840a2b7e048018d18d60bdac5c09224de85370 (patch)
tree87e9f8a2317e39358f5ea189d79ef2158de5faf8 /drivers
parent2ab704a47e0f27df758840a589aec3298dbb98dd (diff)
parent662786a5429c3a992c6f884a647ee32424822358 (diff)
downloadlinux-87840a2b7e048018d18d60bdac5c09224de85370.tar.bz2
Merge branch 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "Here is the 4.9 pull request from I2C including: - centralized error messages when registering to the core - improved lockdep annotations to prevent false positives - DT support for muxes, gates, and arbitrators - bus speeds can now be obtained from ACPI - i2c-octeon got refactored and now supports ThunderX SoCs, too - i2c-tegra and i2c-designware got a bigger bunch of updates - a couple of standard driver fixes and improvements" * 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits) i2c: axxia: disable clks in case of failure in probe i2c: octeon: thunderx: Limit register access retries i2c: uniphier-f: fix misdetection of incomplete STOP condition gpio: pca953x: variable 'id' was used twice i2c: i801: Add support for Kaby Lake PCH-H gpio: pca953x: fix an incorrect lockdep warning i2c: add a warning to i2c_adapter_depth() lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible i2c: export i2c_adapter_depth() i2c: rk3x: Fix variable 'min_total_ns' unused warning i2c: rk3x: Fix sparse warning i2c / ACPI: Do not touch an I2C device if it belongs to another adapter i2c: octeon: Fix high-level controller status check i2c: octeon: Avoid sending STOP during recovery i2c: octeon: Fix set SCL recovery function i2c: rcar: add support for r8a7796 (R-Car M3-W) i2c: imx: make bus recovery through pinctrl optional i2c: meson: add gxbb compatible string i2c: uniphier-f: set the adapter to master mode when probing i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpio/gpio-pca953x.c16
-rw-r--r--drivers/gpu/drm/drm_dp_helper.c10
-rw-r--r--drivers/i2c/busses/Kconfig13
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-amd756.c5
-rw-r--r--drivers/i2c/busses/i2c-at91.c2
-rw-r--r--drivers/i2c/busses/i2c-axxia.c8
-rw-r--r--drivers/i2c/busses/i2c-bcm-iproc.c8
-rw-r--r--drivers/i2c/busses/i2c-bcm-kona.c4
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c4
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c4
-rw-r--r--drivers/i2c/busses/i2c-cadence.c4
-rw-r--r--drivers/i2c/busses/i2c-cpm.c4
-rw-r--r--drivers/i2c/busses/i2c-cros-ec-tunnel.c4
-rw-r--r--drivers/i2c/busses/i2c-davinci.c4
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c196
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h12
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c43
-rw-r--r--drivers/i2c/busses/i2c-diolan-u2c.c4
-rw-r--r--drivers/i2c/busses/i2c-dln2.c4
-rw-r--r--drivers/i2c/busses/i2c-efm32.c1
-rw-r--r--drivers/i2c/busses/i2c-exynos5.c4
-rw-r--r--drivers/i2c/busses/i2c-hix5hd2.c4
-rw-r--r--drivers/i2c/busses/i2c-i801.c5
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c4
-rw-r--r--drivers/i2c/busses/i2c-img-scb.c4
-rw-r--r--drivers/i2c/busses/i2c-imx.c35
-rw-r--r--drivers/i2c/busses/i2c-isch.c4
-rw-r--r--drivers/i2c/busses/i2c-ismt.c4
-rw-r--r--drivers/i2c/busses/i2c-jz4780.c4
-rw-r--r--drivers/i2c/busses/i2c-lpc2k.c4
-rw-r--r--drivers/i2c/busses/i2c-meson.c2
-rw-r--r--drivers/i2c/busses/i2c-mpc.c4
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c4
-rw-r--r--drivers/i2c/busses/i2c-mxs.c1
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c1
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c4
-rw-r--r--drivers/i2c/busses/i2c-ocores.c4
-rw-r--r--drivers/i2c/busses/i2c-octeon-core.c (renamed from drivers/i2c/busses/i2c-octeon.c)1080
-rw-r--r--drivers/i2c/busses/i2c-octeon-core.h216
-rw-r--r--drivers/i2c/busses/i2c-octeon-platdrv.c286
-rw-r--r--drivers/i2c/busses/i2c-omap.c4
-rw-r--r--drivers/i2c/busses/i2c-piix4.c1
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c4
-rw-r--r--drivers/i2c/busses/i2c-pnx.c4
-rw-r--r--drivers/i2c/busses/i2c-puv3.c5
-rw-r--r--drivers/i2c/busses/i2c-pxa.c4
-rw-r--r--drivers/i2c/busses/i2c-rcar.c5
-rw-r--r--drivers/i2c/busses/i2c-riic.c4
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c9
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c1
-rw-r--r--drivers/i2c/busses/i2c-sh7760.c4
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c1
-rw-r--r--drivers/i2c/busses/i2c-sirf.c4
-rw-r--r--drivers/i2c/busses/i2c-st.c4
-rw-r--r--drivers/i2c/busses/i2c-stu300.c5
-rw-r--r--drivers/i2c/busses/i2c-tegra.c279
-rw-r--r--drivers/i2c/busses/i2c-thunderx-pcidrv.c259
-rw-r--r--drivers/i2c/busses/i2c-uniphier-f.c106
-rw-r--r--drivers/i2c/busses/i2c-uniphier.c78
-rw-r--r--drivers/i2c/busses/i2c-wmt.c4
-rw-r--r--drivers/i2c/busses/i2c-xgene-slimpro.c1
-rw-r--r--drivers/i2c/busses/i2c-xiic.c1
-rw-r--r--drivers/i2c/busses/i2c-xlp9xx.c4
-rw-r--r--drivers/i2c/busses/i2c-xlr.c4
-rw-r--r--drivers/i2c/i2c-core.c272
-rw-r--r--drivers/i2c/i2c-mux.c73
-rw-r--r--drivers/i2c/muxes/i2c-arb-gpio-challenge.c2
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca9541.c11
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c46
-rw-r--r--drivers/misc/eeprom/at24.c15
71 files changed, 1933 insertions, 1308 deletions
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 5d059866d17a..45c8817d068c 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -732,7 +732,7 @@ out:
static const struct of_device_id pca953x_dt_ids[];
static int pca953x_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *i2c_id)
{
struct pca953x_platform_data *pdata;
struct pca953x_chip *chip;
@@ -773,27 +773,29 @@ static int pca953x_probe(struct i2c_client *client,
}
chip->regulator = reg;
- if (id) {
- chip->driver_data = id->driver_data;
+ if (i2c_id) {
+ chip->driver_data = i2c_id->driver_data;
} else {
- const struct acpi_device_id *id;
+ const struct acpi_device_id *acpi_id;
const struct of_device_id *match;
match = of_match_device(pca953x_dt_ids, &client->dev);
if (match) {
chip->driver_data = (int)(uintptr_t)match->data;
} else {
- id = acpi_match_device(pca953x_acpi_ids, &client->dev);
- if (!id) {
+ acpi_id = acpi_match_device(pca953x_acpi_ids, &client->dev);
+ if (!acpi_id) {
ret = -ENODEV;
goto err_exit;
}
- chip->driver_data = id->driver_data;
+ chip->driver_data = acpi_id->driver_data;
}
}
mutex_init(&chip->i2c_lock);
+ lockdep_set_subclass(&chip->i2c_lock,
+ i2c_adapter_depth(client->adapter));
/* initialize cached registers from their original values.
* we can't share this chip with another i2c master.
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index eae5ef963cb7..2bd064493ae7 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -790,6 +790,12 @@ static void unlock_bus(struct i2c_adapter *i2c, unsigned int flags)
mutex_unlock(&i2c_to_aux(i2c)->hw_mutex);
}
+static const struct i2c_lock_operations drm_dp_i2c_lock_ops = {
+ .lock_bus = lock_bus,
+ .trylock_bus = trylock_bus,
+ .unlock_bus = unlock_bus,
+};
+
/**
* drm_dp_aux_init() - minimally initialise an aux channel
* @aux: DisplayPort AUX channel
@@ -807,9 +813,7 @@ void drm_dp_aux_init(struct drm_dp_aux *aux)
aux->ddc.algo_data = aux;
aux->ddc.retries = 3;
- aux->ddc.lock_bus = lock_bus;
- aux->ddc.trylock_bus = trylock_bus;
- aux->ddc.unlock_bus = unlock_bus;
+ aux->ddc.lock_ops = &drm_dp_i2c_lock_ops;
}
EXPORT_SYMBOL(drm_dp_aux_init);
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5c3993b26129..6d94e2ec5b4f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -836,7 +836,7 @@ config I2C_SH7760
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
depends on HAS_DMA
- depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
+ depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Renesas SH-Mobile processor.
@@ -956,6 +956,17 @@ config I2C_OCTEON
This driver can also be built as a module. If so, the module
will be called i2c-octeon.
+config I2C_THUNDERX
+ tristate "Cavium ThunderX I2C bus support"
+ depends on 64BIT && PCI && (ARM64 || COMPILE_TEST)
+ select I2C_SMBUS
+ help
+ Say yes if you want to support the I2C serial bus on Cavium
+ ThunderX SOC.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-thunderx.
+
config I2C_XILINX
tristate "Xilinx I2C Controller"
depends on HAS_IOMEM
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 37f2819b4560..29764cc20a44 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -91,7 +91,10 @@ obj-$(CONFIG_I2C_UNIPHIER) += i2c-uniphier.o
obj-$(CONFIG_I2C_UNIPHIER_F) += i2c-uniphier-f.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_WMT) += i2c-wmt.o
+i2c-octeon-objs := i2c-octeon-core.o i2c-octeon-platdrv.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
+i2c-thunderx-objs := i2c-octeon-core.o i2c-thunderx-pcidrv.o
+obj-$(CONFIG_I2C_THUNDERX) += i2c-thunderx.o
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 6c7113d990f8..274908cd1fde 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -378,11 +378,8 @@ static int amd756_probe(struct pci_dev *pdev, const struct pci_device_id *id)
amd756_ioport);
error = i2c_add_adapter(&amd756_smbus);
- if (error) {
- dev_err(&pdev->dev,
- "Adapter registration failed, module not inserted\n");
+ if (error)
goto out_err;
- }
return 0;
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 1bb97f658b47..0b86c6173e07 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -1122,8 +1122,6 @@ static int at91_twi_probe(struct platform_device *pdev)
rc = i2c_add_numbered_adapter(&dev->adapter);
if (rc) {
- dev_err(dev->dev, "Adapter %s registration failed\n",
- dev->adapter.name);
clk_disable_unprepare(dev->clk);
pm_runtime_disable(dev->dev);
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index c335cc7852f9..4351a9343058 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -545,7 +545,11 @@ static int axxia_i2c_probe(struct platform_device *pdev)
return ret;
}
- clk_prepare_enable(idev->i2c_clk);
+ ret = clk_prepare_enable(idev->i2c_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ return ret;
+ }
i2c_set_adapdata(&idev->adapter, idev);
strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
@@ -560,7 +564,7 @@ static int axxia_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(&idev->adapter);
if (ret) {
- dev_err(&pdev->dev, "failed to add adapter\n");
+ clk_disable_unprepare(idev->i2c_clk);
return ret;
}
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 95f7cac76f89..326b3db02c48 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -488,13 +488,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev)
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- ret = i2c_add_adapter(adap);
- if (ret) {
- dev_err(iproc_i2c->device, "failed to add adapter\n");
- return ret;
- }
-
- return 0;
+ return i2c_add_adapter(adap);
}
static int bcm_iproc_i2c_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index 258cb9a40ab3..4e489a9d16fb 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -858,10 +858,8 @@ static int bcm_kona_i2c_probe(struct platform_device *pdev)
adap->dev.of_node = pdev->dev.of_node;
rc = i2c_add_adapter(adap);
- if (rc) {
- dev_err(dev->device, "failed to add adapter\n");
+ if (rc)
return rc;
- }
dev_info(dev->device, "device registered successfully\n");
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 025686d41640..29d00c4f7824 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -685,10 +685,8 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
rc = i2c_add_numbered_adapter(p_adap);
- if (rc < 0) {
- dev_err(&pdev->dev, "Can't add i2c adapter!\n");
+ if (rc < 0)
goto out_error;
- }
platform_set_drvdata(pdev, iface);
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 385b57bfcb38..0652281662a8 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -648,10 +648,8 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
rc = i2c_add_adapter(adap);
- if (rc) {
- dev_err(dev->device, "failed to add adapter\n");
+ if (rc)
goto probe_errorout;
- }
dev_info(dev->device, "%s@%dhz registered in %s mode\n",
int_name ? int_name : " ", dev->clk_freq_hz,
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 3c16a2f7c673..686971263bef 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -963,10 +963,8 @@ static int cdns_i2c_probe(struct platform_device *pdev)
}
ret = i2c_add_adapter(&id->adap);
- if (ret < 0) {
- dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
+ if (ret < 0)
goto err_clk_dis;
- }
/*
* Cadence I2C controller has a bug wherein it generates
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index ee57c1e865e2..d89bde2c5da2 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -665,10 +665,8 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
cpm->adap.nr = (data && len == 4) ? be32_to_cpup(data) : -1;
result = i2c_add_numbered_adapter(&cpm->adap);
- if (result < 0) {
- dev_err(&ofdev->dev, "Unable to register with I2C\n");
+ if (result < 0)
goto out_shut;
- }
dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
cpm->adap.name);
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index 2d5ff86398d0..9b36a7b3befd 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -281,10 +281,8 @@ static int ec_i2c_probe(struct platform_device *pdev)
bus->adap.retries = I2C_MAX_RETRIES;
err = i2c_add_adapter(&bus->adap);
- if (err) {
- dev_err(dev, "cannot register i2c adapter\n");
+ if (err)
return err;
- }
platform_set_drvdata(pdev, bus);
return err;
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index a8bdcb5292f5..9e7ef5cf5d49 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -846,10 +846,8 @@ static int davinci_i2c_probe(struct platform_device *pdev)
adap->nr = pdev->id;
r = i2c_add_numbered_adapter(adap);
- if (r) {
- dev_err(&pdev->dev, "failure adding adapter\n");
+ if (r)
goto err_unuse_clocks;
- }
return 0;
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index fcd973d5131e..1fe93c43215c 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -42,6 +42,8 @@
#define DW_IC_SS_SCL_LCNT 0x18
#define DW_IC_FS_SCL_HCNT 0x1c
#define DW_IC_FS_SCL_LCNT 0x20
+#define DW_IC_HS_SCL_HCNT 0x24
+#define DW_IC_HS_SCL_LCNT 0x28
#define DW_IC_INTR_STAT 0x2c
#define DW_IC_INTR_MASK 0x30
#define DW_IC_RAW_INTR_STAT 0x34
@@ -89,12 +91,17 @@
DW_IC_INTR_TX_ABRT | \
DW_IC_INTR_STOP_DET)
-#define DW_IC_STATUS_ACTIVITY 0x1
+#define DW_IC_STATUS_ACTIVITY 0x1
+#define DW_IC_STATUS_TFE BIT(2)
+#define DW_IC_STATUS_MST_ACTIVITY BIT(5)
#define DW_IC_ERR_TX_ABRT 0x1
#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3))
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2)
+
/*
* status codes
*/
@@ -252,10 +259,15 @@ static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
{
+ dw_writel(dev, enable, DW_IC_ENABLE);
+}
+
+static void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+{
int timeout = 100;
do {
- dw_writel(dev, enable, DW_IC_ENABLE);
+ __i2c_dw_enable(dev, enable);
if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
return;
@@ -282,6 +294,28 @@ static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
return dev->get_clk_rate_khz(dev);
}
+static int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
+{
+ int ret;
+
+ if (!dev->acquire_lock)
+ return 0;
+
+ ret = dev->acquire_lock(dev);
+ if (!ret)
+ return 0;
+
+ dev_err(dev->dev, "couldn't acquire bus ownership\n");
+
+ return ret;
+}
+
+static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
+{
+ if (dev->release_lock)
+ dev->release_lock(dev);
+}
+
/**
* i2c_dw_init() - initialize the designware i2c master hardware
* @dev: device private data
@@ -293,17 +327,13 @@ static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
int i2c_dw_init(struct dw_i2c_dev *dev)
{
u32 hcnt, lcnt;
- u32 reg;
+ u32 reg, comp_param1;
u32 sda_falling_time, scl_falling_time;
int ret;
- if (dev->acquire_lock) {
- ret = dev->acquire_lock(dev);
- if (ret) {
- dev_err(dev->dev, "couldn't acquire bus ownership\n");
- return ret;
- }
- }
+ ret = i2c_dw_acquire_lock(dev);
+ if (ret)
+ return ret;
reg = dw_readl(dev, DW_IC_COMP_TYPE);
if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
@@ -315,13 +345,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
dev_err(dev->dev, "Unknown Synopsys component type: "
"0x%08x\n", reg);
- if (dev->release_lock)
- dev->release_lock(dev);
+ i2c_dw_release_lock(dev);
return -ENODEV;
}
+ comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
/* Disable the adapter */
- __i2c_dw_enable(dev, false);
+ __i2c_dw_enable_and_wait(dev, false);
/* set standard and fast speed deviders for high/low periods */
@@ -347,8 +378,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
- /* Set SCL timing parameters for fast-mode */
- if (dev->fs_hcnt && dev->fs_lcnt) {
+ /* Set SCL timing parameters for fast-mode or fast-mode plus */
+ if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+ hcnt = dev->fp_hcnt;
+ lcnt = dev->fp_lcnt;
+ } else if (dev->fs_hcnt && dev->fs_lcnt) {
hcnt = dev->fs_hcnt;
lcnt = dev->fs_lcnt;
} else {
@@ -366,6 +400,23 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+ if ((dev->master_cfg & DW_IC_CON_SPEED_MASK) ==
+ DW_IC_CON_SPEED_HIGH) {
+ if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+ != DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+ dev_err(dev->dev, "High Speed not supported!\n");
+ dev->master_cfg &= ~DW_IC_CON_SPEED_MASK;
+ dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+ } else if (dev->hs_hcnt && dev->hs_lcnt) {
+ hcnt = dev->hs_hcnt;
+ lcnt = dev->hs_lcnt;
+ dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+ dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+ hcnt, lcnt);
+ }
+ }
+
/* Configure SDA Hold Time if required */
reg = dw_readl(dev, DW_IC_COMP_VERSION);
if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
@@ -387,8 +438,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
/* configure the i2c master */
dw_writel(dev, dev->master_cfg , DW_IC_CON);
- if (dev->release_lock)
- dev->release_lock(dev);
+ i2c_dw_release_lock(dev);
+
return 0;
}
EXPORT_SYMBOL_GPL(i2c_dw_init);
@@ -415,27 +466,45 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
{
struct i2c_msg *msgs = dev->msgs;
- u32 ic_con, ic_tar = 0;
+ u32 ic_tar = 0;
+ bool enabled;
- /* Disable the adapter */
- __i2c_dw_enable(dev, false);
+ enabled = dw_readl(dev, DW_IC_ENABLE_STATUS) & 1;
+
+ if (enabled) {
+ u32 ic_status;
+
+ /*
+ * Only disable adapter if ic_tar and ic_con can't be
+ * dynamically updated
+ */
+ ic_status = dw_readl(dev, DW_IC_STATUS);
+ if (!dev->dynamic_tar_update_enabled ||
+ (ic_status & DW_IC_STATUS_MST_ACTIVITY) ||
+ !(ic_status & DW_IC_STATUS_TFE)) {
+ __i2c_dw_enable_and_wait(dev, false);
+ enabled = false;
+ }
+ }
/* if the slave address is ten bit address, enable 10BITADDR */
- ic_con = dw_readl(dev, DW_IC_CON);
- if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
- ic_con |= DW_IC_CON_10BITADDR_MASTER;
+ if (dev->dynamic_tar_update_enabled) {
/*
* If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
- * mode has to be enabled via bit 12 of IC_TAR register.
- * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
- * detected from registers.
+ * mode has to be enabled via bit 12 of IC_TAR register,
+ * otherwise bit 4 of IC_CON is used.
*/
- ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+ if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+ ic_tar = DW_IC_TAR_10BITADDR_MASTER;
} else {
- ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
- }
+ u32 ic_con = dw_readl(dev, DW_IC_CON);
- dw_writel(dev, ic_con, DW_IC_CON);
+ if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+ ic_con |= DW_IC_CON_10BITADDR_MASTER;
+ else
+ ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+ dw_writel(dev, ic_con, DW_IC_CON);
+ }
/*
* Set the slave (target) address and enable 10-bit addressing mode
@@ -446,8 +515,8 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
/* enforce disabled interrupts (due to HW issues) */
i2c_dw_disable_int(dev);
- /* Enable the adapter */
- __i2c_dw_enable(dev, true);
+ if (!enabled)
+ __i2c_dw_enable(dev, true);
/* Clear and enable interrupts */
dw_readl(dev, DW_IC_CLR_INTR);
@@ -628,7 +697,8 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
}
/*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ * Prepare controller for a transaction and start transfer by calling
+ * i2c_dw_xfer_init()
*/
static int
i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -651,13 +721,9 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
dev->abort_source = 0;
dev->rx_outstanding = 0;
- if (dev->acquire_lock) {
- ret = dev->acquire_lock(dev);
- if (ret) {
- dev_err(dev->dev, "couldn't acquire bus ownership\n");
- goto done_nolock;
- }
- }
+ ret = i2c_dw_acquire_lock(dev);
+ if (ret)
+ goto done_nolock;
ret = i2c_dw_wait_bus_not_busy(dev);
if (ret < 0)
@@ -675,16 +741,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
goto done;
}
- /*
- * We must disable the adapter before returning and signaling the end
- * of the current transfer. Otherwise the hardware might continue
- * generating interrupts which in turn causes a race condition with
- * the following transfer. Needs some more investigation if the
- * additional interrupts are a hardware bug or this driver doesn't
- * handle them correctly yet.
- */
- __i2c_dw_enable(dev, false);
-
if (dev->msg_err) {
ret = dev->msg_err;
goto done;
@@ -704,8 +760,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
ret = -EIO;
done:
- if (dev->release_lock)
- dev->release_lock(dev);
+ i2c_dw_release_lock(dev);
done_nolock:
pm_runtime_mark_last_busy(dev->dev);
@@ -822,9 +877,19 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
*/
tx_aborted:
- if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
+ if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
+ || dev->msg_err) {
+ /*
+ * We must disable interruts before returning and signaling
+ * the end of the current transfer. Otherwise the hardware
+ * might continue generating interrupts for non-existent
+ * transfers.
+ */
+ i2c_dw_disable_int(dev);
+ dw_readl(dev, DW_IC_CLR_INTR);
+
complete(&dev->cmd_complete);
- else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
+ } else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
/* workaround to trigger pending interrupt */
stat = dw_readl(dev, DW_IC_INTR_MASK);
i2c_dw_disable_int(dev);
@@ -837,7 +902,7 @@ tx_aborted:
void i2c_dw_disable(struct dw_i2c_dev *dev)
{
/* Disable controller */
- __i2c_dw_enable(dev, false);
+ __i2c_dw_enable_and_wait(dev, false);
/* Disable all interupts */
dw_writel(dev, 0, DW_IC_INTR_MASK);
@@ -861,6 +926,7 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap = &dev->adapter;
int r;
+ u32 reg;
init_completion(&dev->cmd_complete);
@@ -868,6 +934,26 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
if (r)
return r;
+ r = i2c_dw_acquire_lock(dev);
+ if (r)
+ return r;
+
+ /*
+ * Test if dynamic TAR update is enabled in this controller by writing
+ * to IC_10BITADDR_MASTER field in IC_CON: when it is enabled this
+ * field is read-only so it should not succeed
+ */
+ reg = dw_readl(dev, DW_IC_CON);
+ dw_writel(dev, reg ^ DW_IC_CON_10BITADDR_MASTER, DW_IC_CON);
+
+ if ((dw_readl(dev, DW_IC_CON) & DW_IC_CON_10BITADDR_MASTER) ==
+ (reg & DW_IC_CON_10BITADDR_MASTER)) {
+ dev->dynamic_tar_update_enabled = true;
+ dev_dbg(dev->dev, "Dynamic TAR update enabled");
+ }
+
+ i2c_dw_release_lock(dev);
+
snprintf(adap->name, sizeof(adap->name),
"Synopsys DesignWare I2C adapter");
adap->retries = 3;
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 38493a7142ad..0d44d2ae7d4c 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -26,6 +26,7 @@
#define DW_IC_CON_MASTER 0x1
#define DW_IC_CON_SPEED_STD 0x2
#define DW_IC_CON_SPEED_FAST 0x4
+#define DW_IC_CON_SPEED_HIGH 0x6
#define DW_IC_CON_SPEED_MASK 0x6
#define DW_IC_CON_10BITADDR_MASTER 0x10
#define DW_IC_CON_RESTART_EN 0x20
@@ -57,10 +58,15 @@
* @tx_fifo_depth: depth of the hardware tx fifo
* @rx_fifo_depth: depth of the hardware rx fifo
* @rx_outstanding: current master-rx elements in tx fifo
+ * @clk_freq: bus clock frequency
* @ss_hcnt: standard speed HCNT value
* @ss_lcnt: standard speed LCNT value
* @fs_hcnt: fast speed HCNT value
* @fs_lcnt: fast speed LCNT value
+ * @fp_hcnt: fast plus HCNT value
+ * @fp_lcnt: fast plus LCNT value
+ * @hs_hcnt: high speed HCNT value
+ * @hs_lcnt: high speed LCNT value
* @acquire_lock: function to acquire a hardware lock on the bus
* @release_lock: function to release a hardware lock on the bus
* @pm_runtime_disabled: true if pm runtime is disabled
@@ -96,6 +102,7 @@ struct dw_i2c_dev {
unsigned int tx_fifo_depth;
unsigned int rx_fifo_depth;
int rx_outstanding;
+ u32 clk_freq;
u32 sda_hold_time;
u32 sda_falling_time;
u32 scl_falling_time;
@@ -103,9 +110,14 @@ struct dw_i2c_dev {
u16 ss_lcnt;
u16 fs_hcnt;
u16 fs_lcnt;
+ u16 fp_hcnt;
+ u16 fp_lcnt;
+ u16 hs_hcnt;
+ u16 hs_lcnt;
int (*acquire_lock)(struct dw_i2c_dev *dev);
void (*release_lock)(struct dw_i2c_dev *dev);
bool pm_runtime_disabled;
+ bool dynamic_tar_update_enabled;
};
#define ACCESS_SWAP 0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d656657b805c..0b42a12171f3 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -107,6 +107,8 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, NULL);
dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
&dev->sda_hold_time);
+ dw_i2c_acpi_params(pdev, "FPCN", &dev->fp_hcnt, &dev->fp_lcnt, NULL);
+ dw_i2c_acpi_params(pdev, "HSCN", &dev->hs_hcnt, &dev->hs_lcnt, NULL);
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (id && id->driver_data)
@@ -155,7 +157,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
struct i2c_adapter *adap;
struct resource *mem;
int irq, r;
- u32 clk_freq, ht = 0;
+ u32 acpi_speed, ht = 0;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
@@ -175,10 +177,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
/* fast mode by default because of legacy reasons */
- clk_freq = 400000;
+ dev->clk_freq = 400000;
if (pdata) {
- clk_freq = pdata->i2c_scl_freq;
+ dev->clk_freq = pdata->i2c_scl_freq;
} else {
device_property_read_u32(&pdev->dev, "i2c-sda-hold-time-ns",
&ht);
@@ -187,17 +189,24 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
device_property_read_u32(&pdev->dev, "i2c-scl-falling-time-ns",
&dev->scl_falling_time);
device_property_read_u32(&pdev->dev, "clock-frequency",
- &clk_freq);
+ &dev->clk_freq);
}
+ acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
+ if (acpi_speed)
+ dev->clk_freq = acpi_speed;
+
if (has_acpi_companion(&pdev->dev))
dw_i2c_acpi_configure(pdev);
/*
- * Only standard mode at 100kHz and fast mode at 400kHz are supported.
+ * Only standard mode at 100kHz, fast mode at 400kHz,
+ * fast mode plus at 1MHz and high speed mode at 3.4MHz are supported.
*/
- if (clk_freq != 100000 && clk_freq != 400000) {
- dev_err(&pdev->dev, "Only 100kHz and 400kHz supported");
+ if (dev->clk_freq != 100000 && dev->clk_freq != 400000
+ && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
+ dev_err(&pdev->dev,
+ "Only 100kHz, 400kHz, 1MHz and 3.4MHz supported");
return -EINVAL;
}
@@ -212,12 +221,20 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK;
- if (clk_freq == 100000)
- dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
- DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD;
- else
- dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
- DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+
+ dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+ DW_IC_CON_RESTART_EN;
+
+ switch (dev->clk_freq) {
+ case 100000:
+ dev->master_cfg |= DW_IC_CON_SPEED_STD;
+ break;
+ case 3400000:
+ dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
+ break;
+ default:
+ dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+ }
dev->clk = devm_clk_get(&pdev->dev, NULL);
if (!i2c_dw_plat_prepare_clk(dev, true)) {
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index b19a310bf9b3..f718ee4e3332 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -487,10 +487,8 @@ static int diolan_u2c_probe(struct usb_interface *interface,
/* and finally attach to i2c layer */
ret = i2c_add_adapter(&dev->adapter);
- if (ret < 0) {
- dev_err(&interface->dev, "failed to add I2C adapter\n");
+ if (ret < 0)
goto error_free;
- }
dev_dbg(&interface->dev, "connected " DRIVER_NAME "\n");
diff --git a/drivers/i2c/busses/i2c-dln2.c b/drivers/i2c/busses/i2c-dln2.c
index f2eb4f76591f..8acda2aa1558 100644
--- a/drivers/i2c/busses/i2c-dln2.c
+++ b/drivers/i2c/busses/i2c-dln2.c
@@ -228,10 +228,8 @@ static int dln2_i2c_probe(struct platform_device *pdev)
/* and finally attach to i2c layer */
ret = i2c_add_adapter(&dln2->adapter);
- if (ret < 0) {
- dev_err(dev, "failed to add I2C adapter: %d\n", ret);
+ if (ret < 0)
goto out_disable;
- }
return 0;
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index e253598d764c..aa336ba89aa3 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -438,7 +438,6 @@ static int efm32_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(&ddata->adapter);
if (ret) {
- dev_err(&pdev->dev, "failed to add i2c adapter (%d)\n", ret);
free_irq(ddata->irq, ddata);
err_disable_clk:
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index c0e3ada02876..bea607149972 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -796,10 +796,8 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
exynos5_i2c_reset(i2c);
ret = i2c_add_adapter(&i2c->adap);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ if (ret < 0)
goto err_clk;
- }
platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 7c6966434ee7..ae7f3180f7e8 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -478,10 +478,8 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
pm_runtime_enable(priv->dev);
ret = i2c_add_adapter(&priv->adap);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+ if (ret < 0)
goto err_runtime;
- }
return ret;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 26298af73232..08847e8b8998 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -64,6 +64,7 @@
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
* Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
* Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
+ * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
@@ -226,6 +227,7 @@
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
+#define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3
struct i801_mux_config {
char *gpio_chip;
@@ -1006,6 +1008,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) },
{ 0, }
};
@@ -1482,6 +1485,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
+ case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
priv->features |= FEATURE_SMBUS_PEC;
@@ -1615,7 +1619,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
"SMBus I801 adapter at %04lx", priv->smba);
err = i2c_add_adapter(&priv->adapter);
if (err) {
- dev_err(&dev->dev, "Failed to add SMBus adapter\n");
i801_acpi_remove(priv);
return err;
}
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index cdaa7be2cd1b..412b91d255ad 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -751,10 +751,8 @@ static int iic_probe(struct platform_device *ofdev)
adap->timeout = HZ;
ret = i2c_add_adapter(adap);
- if (ret < 0) {
- dev_err(&ofdev->dev, "failed to register i2c adapter\n");
+ if (ret < 0)
goto error_cleanup;
- }
dev_info(&ofdev->dev, "using %s mode\n",
dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c
index ea20425b6972..db8e8b40569d 100644
--- a/drivers/i2c/busses/i2c-img-scb.c
+++ b/drivers/i2c/busses/i2c-img-scb.c
@@ -1394,10 +1394,8 @@ static int img_i2c_probe(struct platform_device *pdev)
goto disable_clk;
ret = i2c_add_numbered_adapter(&i2c->adap);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to add adapter\n");
+ if (ret < 0)
goto disable_clk;
- }
return 0;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 1844bc9f7cd5..592a8f26a708 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -984,11 +984,24 @@ static void i2c_imx_unprepare_recovery(struct i2c_adapter *adap)
pinctrl_select_state(i2c_imx->pinctrl, i2c_imx->pinctrl_pins_default);
}
-static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
+/*
+ * We switch SCL and SDA to their GPIO function and do some bitbanging
+ * for bus recovery. These alternative pinmux settings can be
+ * described in the device tree by a separate pinctrl state "gpio". If
+ * this is missing this is not a big problem, the only implication is
+ * that we can't do bus recovery.
+ */
+static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
struct platform_device *pdev)
{
struct i2c_bus_recovery_info *rinfo = &i2c_imx->rinfo;
+ i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (!i2c_imx->pinctrl || IS_ERR(i2c_imx->pinctrl)) {
+ dev_info(&pdev->dev, "can't get pinctrl, bus recovery not supported\n");
+ return PTR_ERR(i2c_imx->pinctrl);
+ }
+
i2c_imx->pinctrl_pins_default = pinctrl_lookup_state(i2c_imx->pinctrl,
PINCTRL_STATE_DEFAULT);
i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl,
@@ -1001,7 +1014,7 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
IS_ERR(i2c_imx->pinctrl_pins_default) ||
IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
dev_dbg(&pdev->dev, "recovery information incomplete\n");
- return;
+ return 0;
}
dev_dbg(&pdev->dev, "using scl-gpio %d and sda-gpio %d for recovery\n",
@@ -1011,6 +1024,8 @@ static void i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
rinfo->unprepare_recovery = i2c_imx_unprepare_recovery;
rinfo->recover_bus = i2c_generic_gpio_recovery;
i2c_imx->adapter.bus_recovery_info = rinfo;
+
+ return 0;
}
static u32 i2c_imx_func(struct i2c_adapter *adapter)
@@ -1081,12 +1096,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
return ret;
}
- i2c_imx->pinctrl = devm_pinctrl_get(&pdev->dev);
- if (IS_ERR(i2c_imx->pinctrl)) {
- ret = PTR_ERR(i2c_imx->pinctrl);
- goto clk_disable;
- }
-
/* Request IRQ */
ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
pdev->name, i2c_imx);
@@ -1125,14 +1134,16 @@ static int i2c_imx_probe(struct platform_device *pdev)
i2c_imx, IMX_I2C_I2CR);
imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
- i2c_imx_init_recovery_info(i2c_imx, pdev);
+ /* Init optional bus recovery function */
+ ret = i2c_imx_init_recovery_info(i2c_imx, pdev);
+ /* Give it another chance if pinctrl used is not ready yet */
+ if (ret == -EPROBE_DEFER)
+ goto rpm_disable;
/* Add I2C adapter */
ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
- if (ret < 0) {
- dev_err(&pdev->dev, "registration failed\n");
+ if (ret < 0)
goto rpm_disable;
- }
pm_runtime_mark_last_busy(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index c2f25f19d76f..0cf1379f4e80 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -288,10 +288,8 @@ static int smbus_sch_probe(struct platform_device *dev)
"SMBus SCH adapter at %04x", sch_smba);
retval = i2c_add_adapter(&sch_adapter);
- if (retval) {
- dev_err(&dev->dev, "Couldn't register adapter!\n");
+ if (retval)
sch_smba = 0;
- }
return retval;
}
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 1c8707710098..f573448d2132 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -922,10 +922,8 @@ ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return err;
err = i2c_add_adapter(&priv->adapter);
- if (err) {
- dev_err(&pdev->dev, "Failed to add SMBus iSMT adapter\n");
+ if (err)
return -ENODEV;
- }
return 0;
}
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index cd9872594fe2..b8ea62105f42 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -798,10 +798,8 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
goto err;
ret = i2c_add_adapter(&i2c->adap);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to add bus\n");
+ if (ret < 0)
goto err;
- }
return 0;
diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c
index 586a15205e61..9b1fef455a89 100644
--- a/drivers/i2c/busses/i2c-lpc2k.c
+++ b/drivers/i2c/busses/i2c-lpc2k.c
@@ -432,10 +432,8 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
i2c->adap.dev.of_node = pdev->dev.of_node;
ret = i2c_add_adapter(&i2c->adap);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to add adapter!\n");
+ if (ret < 0)
goto fail_clk;
- }
dev_info(&pdev->dev, "LPC2K I2C adapter\n");
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 76e28980904f..2aa61bbbd307 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -453,7 +453,6 @@ static int meson_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
- dev_err(&pdev->dev, "can't register adapter\n");
clk_unprepare(i2c->clk);
return ret;
}
@@ -473,6 +472,7 @@ static int meson_i2c_remove(struct platform_device *pdev)
static const struct of_device_id meson_i2c_match[] = {
{ .compatible = "amlogic,meson6-i2c" },
+ { .compatible = "amlogic,meson-gxbb-i2c" },
{ },
};
MODULE_DEVICE_TABLE(of, meson_i2c_match);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 48ecffecc0ed..565a49a0c564 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -737,10 +737,8 @@ static int fsl_i2c_probe(struct platform_device *op)
i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
result = i2c_add_adapter(&i2c->adap);
- if (result < 0) {
- dev_err(i2c->dev, "failed to add adapter\n");
+ if (result < 0)
goto fail_add;
- }
return result;
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index d9373e60be8a..4a7d9bc2142b 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -786,10 +786,8 @@ static int mtk_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&i2c->adap, i2c);
ret = i2c_add_adapter(&i2c->adap);
- if (ret) {
- dev_err(&pdev->dev, "Failed to add i2c bus to i2c core\n");
+ if (ret)
return ret;
- }
platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 033846cdf266..5738556b6aac 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -868,7 +868,6 @@ static int mxs_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(adap, i2c);
err = i2c_add_numbered_adapter(adap);
if (err) {
- dev_err(dev, "Failed to add adapter (%d)\n", err);
writel(MXS_I2C_CTRL0_SFTRST,
i2c->regs + MXS_I2C_CTRL0_SET);
return err;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 42fcc9458432..374b35e7e450 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -366,7 +366,6 @@ static int nforce2_probe_smb(struct pci_dev *dev, int bar, int alt_reg,
error = i2c_add_adapter(&smbus->adapter);
if (error) {
- dev_err(&smbus->adapter.dev, "Failed to register adapter.\n");
release_region(smbus->base, smbus->size);
return error;
}
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index bcd17e8cbcb4..da6609d62848 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1046,10 +1046,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
adap->name, dev->virtbase);
ret = i2c_add_adapter(adap);
- if (ret) {
- dev_err(&adev->dev, "failed to add adapter\n");
+ if (ret)
goto err_no_adap;
- }
pm_runtime_put(&adev->dev);
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index ac88a524143e..34f1889a4073 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -494,10 +494,8 @@ static int ocores_i2c_probe(struct platform_device *pdev)
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
- if (ret) {
- dev_err(&pdev->dev, "Failed to add adapter\n");
+ if (ret)
goto err_clk;
- }
/* add in known devices to the bus */
if (pdata) {
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon-core.c
index 30ae35146723..419b54bfc7c7 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@@ -4,280 +4,127 @@
*
* Portions Copyright (C) 2010 - 2016 Cavium, Inc.
*
- * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ * This file contains the shared part of the driver for the i2c adapter in
+ * Cavium Networks' OCTEON processors and ThunderX SOCs.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <linux/atomic.h>
-#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/of.h>
-
-#include <asm/octeon/octeon.h>
-
-#define DRV_NAME "i2c-octeon"
-
-/* Register offsets */
-#define SW_TWSI 0x00
-#define TWSI_INT 0x10
-#define SW_TWSI_EXT 0x18
-
-/* Controller command patterns */
-#define SW_TWSI_V BIT_ULL(63) /* Valid bit */
-#define SW_TWSI_EIA BIT_ULL(61) /* Extended internal address */
-#define SW_TWSI_R BIT_ULL(56) /* Result or read bit */
-#define SW_TWSI_SOVR BIT_ULL(55) /* Size override */
-#define SW_TWSI_SIZE_SHIFT 52
-#define SW_TWSI_ADDR_SHIFT 40
-#define SW_TWSI_IA_SHIFT 32 /* Internal address */
-
-/* Controller opcode word (bits 60:57) */
-#define SW_TWSI_OP_SHIFT 57
-#define SW_TWSI_OP_7 (0ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_7_IA (1ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_10 (2ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_10_IA (3ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_TWSI_CLK (4ULL << SW_TWSI_OP_SHIFT)
-#define SW_TWSI_OP_EOP (6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */
-
-/* Controller extended opcode word (bits 34:32) */
-#define SW_TWSI_EOP_SHIFT 32
-#define SW_TWSI_EOP_TWSI_DATA (SW_TWSI_OP_EOP | 1ULL << SW_TWSI_EOP_SHIFT)
-#define SW_TWSI_EOP_TWSI_CTL (SW_TWSI_OP_EOP | 2ULL << SW_TWSI_EOP_SHIFT)
-#define SW_TWSI_EOP_TWSI_CLKCTL (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
-#define SW_TWSI_EOP_TWSI_STAT (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
-#define SW_TWSI_EOP_TWSI_RST (SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT)
-
-/* Controller command and status bits */
-#define TWSI_CTL_CE 0x80 /* High level controller enable */
-#define TWSI_CTL_ENAB 0x40 /* Bus enable */
-#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */
-#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */
-#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
-#define TWSI_CTL_AAK 0x04 /* Assert ACK */
-
-/* Status values */
-#define STAT_ERROR 0x00
-#define STAT_START 0x08
-#define STAT_REP_START 0x10
-#define STAT_TXADDR_ACK 0x18
-#define STAT_TXADDR_NAK 0x20
-#define STAT_TXDATA_ACK 0x28
-#define STAT_TXDATA_NAK 0x30
-#define STAT_LOST_ARB_38 0x38
-#define STAT_RXADDR_ACK 0x40
-#define STAT_RXADDR_NAK 0x48
-#define STAT_RXDATA_ACK 0x50
-#define STAT_RXDATA_NAK 0x58
-#define STAT_SLAVE_60 0x60
-#define STAT_LOST_ARB_68 0x68
-#define STAT_SLAVE_70 0x70
-#define STAT_LOST_ARB_78 0x78
-#define STAT_SLAVE_80 0x80
-#define STAT_SLAVE_88 0x88
-#define STAT_GENDATA_ACK 0x90
-#define STAT_GENDATA_NAK 0x98
-#define STAT_SLAVE_A0 0xA0
-#define STAT_SLAVE_A8 0xA8
-#define STAT_LOST_ARB_B0 0xB0
-#define STAT_SLAVE_LOST 0xB8
-#define STAT_SLAVE_NAK 0xC0
-#define STAT_SLAVE_ACK 0xC8
-#define STAT_AD2W_ACK 0xD0
-#define STAT_AD2W_NAK 0xD8
-#define STAT_IDLE 0xF8
-
-/* TWSI_INT values */
-#define TWSI_INT_ST_INT BIT_ULL(0)
-#define TWSI_INT_TS_INT BIT_ULL(1)
-#define TWSI_INT_CORE_INT BIT_ULL(2)
-#define TWSI_INT_ST_EN BIT_ULL(4)
-#define TWSI_INT_TS_EN BIT_ULL(5)
-#define TWSI_INT_CORE_EN BIT_ULL(6)
-#define TWSI_INT_SDA_OVR BIT_ULL(8)
-#define TWSI_INT_SCL_OVR BIT_ULL(9)
-#define TWSI_INT_SDA BIT_ULL(10)
-#define TWSI_INT_SCL BIT_ULL(11)
-
-#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
-
-struct octeon_i2c {
- wait_queue_head_t queue;
- struct i2c_adapter adap;
- int irq;
- int hlc_irq; /* For cn7890 only */
- u32 twsi_freq;
- int sys_freq;
- void __iomem *twsi_base;
- struct device *dev;
- bool hlc_enabled;
- bool broken_irq_mode;
- bool broken_irq_check;
- void (*int_enable)(struct octeon_i2c *);
- void (*int_disable)(struct octeon_i2c *);
- void (*hlc_int_enable)(struct octeon_i2c *);
- void (*hlc_int_disable)(struct octeon_i2c *);
- atomic_t int_enable_cnt;
- atomic_t hlc_int_enable_cnt;
-};
-
-static void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
-{
- __raw_writeq(val, addr);
- __raw_readq(addr); /* wait for write to land */
-}
-
-/**
- * octeon_i2c_reg_write - write an I2C core register
- * @i2c: The struct octeon_i2c
- * @eop_reg: Register selector
- * @data: Value to be written
- *
- * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
- */
-static void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
-{
- u64 tmp;
- __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
- do {
- tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
- } while ((tmp & SW_TWSI_V) != 0);
-}
-
-#define octeon_i2c_ctl_write(i2c, val) \
- octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CTL, val)
-#define octeon_i2c_data_write(i2c, val) \
- octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_DATA, val)
+#include "i2c-octeon-core.h"
-/**
- * octeon_i2c_reg_read - read lower bits of an I2C core register
- * @i2c: The struct octeon_i2c
- * @eop_reg: Register selector
- *
- * Returns the data.
- *
- * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
- */
-static u8 octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg)
+/* interrupt service routine */
+irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
{
- u64 tmp;
+ struct octeon_i2c *i2c = dev_id;
- __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
- do {
- tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
- } while ((tmp & SW_TWSI_V) != 0);
+ i2c->int_disable(i2c);
+ wake_up(&i2c->queue);
- return tmp & 0xFF;
+ return IRQ_HANDLED;
}
-#define octeon_i2c_ctl_read(i2c) \
- octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL)
-#define octeon_i2c_data_read(i2c) \
- octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA)
-#define octeon_i2c_stat_read(i2c) \
- octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT)
-
-/**
- * octeon_i2c_read_int - read the TWSI_INT register
- * @i2c: The struct octeon_i2c
- *
- * Returns the value of the register.
- */
-static u64 octeon_i2c_read_int(struct octeon_i2c *i2c)
+static bool octeon_i2c_test_iflg(struct octeon_i2c *i2c)
{
- return __raw_readq(i2c->twsi_base + TWSI_INT);
+ return (octeon_i2c_ctl_read(i2c) & TWSI_CTL_IFLG);
}
-/**
- * octeon_i2c_write_int - write the TWSI_INT register
- * @i2c: The struct octeon_i2c
- * @data: Value to be written
- */
-static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+static bool octeon_i2c_test_ready(struct octeon_i2c *i2c, bool *first)
{
- octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT);
-}
+ if (octeon_i2c_test_iflg(i2c))
+ return true;
-/**
- * octeon_i2c_int_enable - enable the CORE interrupt
- * @i2c: The struct octeon_i2c
- *
- * The interrupt will be asserted when there is non-STAT_IDLE state in
- * the SW_TWSI_EOP_TWSI_STAT register.
- */
-static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
-{
- octeon_i2c_write_int(i2c, TWSI_INT_CORE_EN);
-}
+ if (*first) {
+ *first = false;
+ return false;
+ }
-/* disable the CORE interrupt */
-static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
-{
- /* clear TS/ST/IFLG events */
- octeon_i2c_write_int(i2c, 0);
+ /*
+ * IRQ has signaled an event but IFLG hasn't changed.
+ * Sleep and retry once.
+ */
+ usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
+ return octeon_i2c_test_iflg(i2c);
}
/**
- * octeon_i2c_int_enable78 - enable the CORE interrupt
+ * octeon_i2c_wait - wait for the IFLG to be set
* @i2c: The struct octeon_i2c
*
- * The interrupt will be asserted when there is non-STAT_IDLE state in the
- * SW_TWSI_EOP_TWSI_STAT register.
+ * Returns 0 on success, otherwise a negative errno.
*/
-static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
-{
- atomic_inc_return(&i2c->int_enable_cnt);
- enable_irq(i2c->irq);
-}
-
-static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
+static int octeon_i2c_wait(struct octeon_i2c *i2c)
{
- int count;
+ long time_left;
+ bool first = true;
/*
- * The interrupt can be disabled in two places, but we only
- * want to make the disable_irq_nosync() call once, so keep
- * track with the atomic variable.
+ * Some chip revisions don't assert the irq in the interrupt
+ * controller. So we must poll for the IFLG change.
*/
- count = atomic_dec_if_positive(cnt);
- if (count >= 0)
- disable_irq_nosync(irq);
+ if (i2c->broken_irq_mode) {
+ u64 end = get_jiffies_64() + i2c->adap.timeout;
+
+ while (!octeon_i2c_test_iflg(i2c) &&
+ time_before64(get_jiffies_64(), end))
+ usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
+
+ return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
+ }
+
+ i2c->int_enable(i2c);
+ time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_ready(i2c, &first),
+ i2c->adap.timeout);
+ i2c->int_disable(i2c);
+
+ if (i2c->broken_irq_check && !time_left &&
+ octeon_i2c_test_iflg(i2c)) {
+ dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
+ i2c->broken_irq_mode = true;
+ return 0;
+ }
+
+ if (!time_left)
+ return -ETIMEDOUT;
+
+ return 0;
}
-/* disable the CORE interrupt */
-static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
+static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c)
{
- __octeon_i2c_irq_disable(&i2c->int_enable_cnt, i2c->irq);
+ return (__raw_readq(i2c->twsi_base + SW_TWSI(i2c)) & SW_TWSI_V) == 0;
}
-/**
- * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
- * @i2c: The struct octeon_i2c
- *
- * The interrupt will be asserted when there is non-STAT_IDLE state in
- * the SW_TWSI_EOP_TWSI_STAT register.
- */
-static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
+static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c, bool *first)
{
- atomic_inc_return(&i2c->hlc_int_enable_cnt);
- enable_irq(i2c->hlc_irq);
+ /* check if valid bit is cleared */
+ if (octeon_i2c_hlc_test_valid(i2c))
+ return true;
+
+ if (*first) {
+ *first = false;
+ return false;
+ }
+
+ /*
+ * IRQ has signaled an event but valid bit isn't cleared.
+ * Sleep and retry once.
+ */
+ usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
+ return octeon_i2c_hlc_test_valid(i2c);
}
-/* disable the ST interrupt */
-static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
+static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
{
- __octeon_i2c_irq_disable(&i2c->hlc_int_enable_cnt, i2c->hlc_irq);
+ /* clear ST/TS events, listen for neither */
+ octeon_i2c_write_int(i2c, TWSI_INT_ST_INT | TWSI_INT_TS_INT);
}
/*
@@ -321,83 +168,41 @@ static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c)
octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
}
-/* interrupt service routine */
-static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
-{
- struct octeon_i2c *i2c = dev_id;
-
- i2c->int_disable(i2c);
- wake_up(&i2c->queue);
-
- return IRQ_HANDLED;
-}
-
-/* HLC interrupt service routine */
-static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
-{
- struct octeon_i2c *i2c = dev_id;
-
- i2c->hlc_int_disable(i2c);
- wake_up(&i2c->queue);
-
- return IRQ_HANDLED;
-}
-
-static bool octeon_i2c_test_iflg(struct octeon_i2c *i2c)
-{
- return (octeon_i2c_ctl_read(i2c) & TWSI_CTL_IFLG);
-}
-
-static bool octeon_i2c_test_ready(struct octeon_i2c *i2c, bool *first)
-{
- if (octeon_i2c_test_iflg(i2c))
- return true;
-
- if (*first) {
- *first = false;
- return false;
- }
-
- /*
- * IRQ has signaled an event but IFLG hasn't changed.
- * Sleep and retry once.
- */
- usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
- return octeon_i2c_test_iflg(i2c);
-}
-
/**
- * octeon_i2c_wait - wait for the IFLG to be set
+ * octeon_i2c_hlc_wait - wait for an HLC operation to complete
* @i2c: The struct octeon_i2c
*
- * Returns 0 on success, otherwise a negative errno.
+ * Returns 0 on success, otherwise -ETIMEDOUT.
*/
-static int octeon_i2c_wait(struct octeon_i2c *i2c)
+static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
{
- long time_left;
- bool first = 1;
+ bool first = true;
+ int time_left;
/*
- * Some chip revisions don't assert the irq in the interrupt
- * controller. So we must poll for the IFLG change.
+ * Some cn38xx boards don't assert the irq in the interrupt
+ * controller. So we must poll for the valid bit change.
*/
if (i2c->broken_irq_mode) {
u64 end = get_jiffies_64() + i2c->adap.timeout;
- while (!octeon_i2c_test_iflg(i2c) &&
+ while (!octeon_i2c_hlc_test_valid(i2c) &&
time_before64(get_jiffies_64(), end))
usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
- return octeon_i2c_test_iflg(i2c) ? 0 : -ETIMEDOUT;
+ return octeon_i2c_hlc_test_valid(i2c) ? 0 : -ETIMEDOUT;
}
- i2c->int_enable(i2c);
- time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_ready(i2c, &first),
+ i2c->hlc_int_enable(i2c);
+ time_left = wait_event_timeout(i2c->queue,
+ octeon_i2c_hlc_test_ready(i2c, &first),
i2c->adap.timeout);
- i2c->int_disable(i2c);
+ i2c->hlc_int_disable(i2c);
+ if (!time_left)
+ octeon_i2c_hlc_int_clear(i2c);
if (i2c->broken_irq_check && !time_left &&
- octeon_i2c_test_iflg(i2c)) {
+ octeon_i2c_hlc_test_valid(i2c)) {
dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
i2c->broken_irq_mode = true;
return 0;
@@ -405,13 +210,21 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
if (!time_left)
return -ETIMEDOUT;
-
return 0;
}
static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
{
- u8 stat = octeon_i2c_stat_read(i2c);
+ u8 stat;
+
+ /*
+ * This is ugly... in HLC mode the status is not in the status register
+ * but in the lower 8 bits of SW_TWSI.
+ */
+ if (i2c->hlc_enabled)
+ stat = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+ else
+ stat = octeon_i2c_stat_read(i2c);
switch (stat) {
/* Everything is fine */
@@ -470,83 +283,157 @@ static int octeon_i2c_check_status(struct octeon_i2c *i2c, int final_read)
}
}
-static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c)
+static int octeon_i2c_recovery(struct octeon_i2c *i2c)
{
- return (__raw_readq(i2c->twsi_base + SW_TWSI) & SW_TWSI_V) == 0;
+ int ret;
+
+ ret = i2c_recover_bus(&i2c->adap);
+ if (ret)
+ /* recover failed, try hardware re-init */
+ ret = octeon_i2c_init_lowlevel(i2c);
+ return ret;
}
-static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c, bool *first)
+/**
+ * octeon_i2c_start - send START to the bus
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_start(struct octeon_i2c *i2c)
{
- /* check if valid bit is cleared */
- if (octeon_i2c_hlc_test_valid(i2c))
- return true;
+ int ret;
+ u8 stat;
- if (*first) {
- *first = false;
- return false;
- }
+ octeon_i2c_hlc_disable(i2c);
- /*
- * IRQ has signaled an event but valid bit isn't cleared.
- * Sleep and retry once.
- */
- usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
- return octeon_i2c_hlc_test_valid(i2c);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA);
+ ret = octeon_i2c_wait(i2c);
+ if (ret)
+ goto error;
+
+ stat = octeon_i2c_stat_read(i2c);
+ if (stat == STAT_START || stat == STAT_REP_START)
+ /* START successful, bail out */
+ return 0;
+
+error:
+ /* START failed, try to recover */
+ ret = octeon_i2c_recovery(i2c);
+ return (ret) ? ret : -EAGAIN;
}
-static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+/* send STOP to the bus */
+static void octeon_i2c_stop(struct octeon_i2c *i2c)
{
- octeon_i2c_write_int(i2c, TWSI_INT_ST_EN);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STP);
}
-static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
+/**
+ * octeon_i2c_read - receive data from the bus via low-level controller
+ * @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the location to store the data
+ * @rlength: Length of the data
+ * @recv_len: flag for length byte
+ *
+ * The address is sent over the bus, then the data is read.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
+ u8 *data, u16 *rlength, bool recv_len)
{
- /* clear ST/TS events, listen for neither */
- octeon_i2c_write_int(i2c, TWSI_INT_ST_INT | TWSI_INT_TS_INT);
+ int i, result, length = *rlength;
+ bool final_read = false;
+
+ octeon_i2c_data_write(i2c, (target << 1) | 1);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ /* address OK ? */
+ result = octeon_i2c_check_status(i2c, false);
+ if (result)
+ return result;
+
+ for (i = 0; i < length; i++) {
+ /*
+ * For the last byte to receive TWSI_CTL_AAK must not be set.
+ *
+ * A special case is I2C_M_RECV_LEN where we don't know the
+ * additional length yet. If recv_len is set we assume we're
+ * not reading the final byte and therefore need to set
+ * TWSI_CTL_AAK.
+ */
+ if ((i + 1 == length) && !(recv_len && i == 0))
+ final_read = true;
+
+ /* clear iflg to allow next event */
+ if (final_read)
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
+ else
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ data[i] = octeon_i2c_data_read(i2c, &result);
+ if (result)
+ return result;
+ if (recv_len && i == 0) {
+ if (data[i] > I2C_SMBUS_BLOCK_MAX + 1)
+ return -EPROTO;
+ length += data[i];
+ }
+
+ result = octeon_i2c_check_status(i2c, final_read);
+ if (result)
+ return result;
+ }
+ *rlength = length;
+ return 0;
}
/**
- * octeon_i2c_hlc_wait - wait for an HLC operation to complete
+ * octeon_i2c_write - send data to the bus via low-level controller
* @i2c: The struct octeon_i2c
+ * @target: Target address
+ * @data: Pointer to the data to be sent
+ * @length: Length of the data
*
- * Returns 0 on success, otherwise -ETIMEDOUT.
+ * The address is sent over the bus, then the data.
+ *
+ * Returns 0 on success, otherwise a negative errno.
*/
-static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
+static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
+ const u8 *data, int length)
{
- bool first = 1;
- int time_left;
+ int i, result;
- /*
- * Some cn38xx boards don't assert the irq in the interrupt
- * controller. So we must poll for the valid bit change.
- */
- if (i2c->broken_irq_mode) {
- u64 end = get_jiffies_64() + i2c->adap.timeout;
+ octeon_i2c_data_write(i2c, target << 1);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
- while (!octeon_i2c_hlc_test_valid(i2c) &&
- time_before64(get_jiffies_64(), end))
- usleep_range(I2C_OCTEON_EVENT_WAIT / 2, I2C_OCTEON_EVENT_WAIT);
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
- return octeon_i2c_hlc_test_valid(i2c) ? 0 : -ETIMEDOUT;
- }
+ for (i = 0; i < length; i++) {
+ result = octeon_i2c_check_status(i2c, false);
+ if (result)
+ return result;
- i2c->hlc_int_enable(i2c);
- time_left = wait_event_timeout(i2c->queue,
- octeon_i2c_hlc_test_ready(i2c, &first),
- i2c->adap.timeout);
- i2c->hlc_int_disable(i2c);
- if (!time_left)
- octeon_i2c_hlc_int_clear(i2c);
+ octeon_i2c_data_write(i2c, data[i]);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
- if (i2c->broken_irq_check && !time_left &&
- octeon_i2c_hlc_test_valid(i2c)) {
- dev_err(i2c->dev, "broken irq connection detected, switching to polling mode.\n");
- i2c->broken_irq_mode = true;
- return 0;
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
}
- if (!time_left)
- return -ETIMEDOUT;
return 0;
}
@@ -570,20 +457,20 @@ static int octeon_i2c_hlc_read(struct octeon_i2c *i2c, struct i2c_msg *msgs)
else
cmd |= SW_TWSI_OP_7;
- octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
ret = octeon_i2c_hlc_wait(i2c);
if (ret)
goto err;
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
+ return octeon_i2c_check_status(i2c, false);
for (i = 0, j = msgs[0].len - 1; i < msgs[0].len && i < 4; i++, j--)
msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
if (msgs[0].len > 4) {
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT(i2c));
for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
msgs[0].buf[j] = (cmd >> (8 * i)) & 0xff;
}
@@ -620,19 +507,17 @@ static int octeon_i2c_hlc_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
for (i = 0; i < msgs[0].len - 4 && i < 4; i++, j--)
ext |= (u64)msgs[0].buf[j] << (8 * i);
- octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+ octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
}
- octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
ret = octeon_i2c_hlc_wait(i2c);
if (ret)
goto err;
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
-
- ret = octeon_i2c_check_status(i2c, false);
+ return octeon_i2c_check_status(i2c, false);
err:
return ret;
@@ -663,27 +548,27 @@ static int octeon_i2c_hlc_comp_read(struct octeon_i2c *i2c, struct i2c_msg *msgs
cmd |= SW_TWSI_EIA;
ext = (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
cmd |= (u64)msgs[0].buf[1] << SW_TWSI_IA_SHIFT;
- octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+ octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
} else {
cmd |= (u64)msgs[0].buf[0] << SW_TWSI_IA_SHIFT;
}
octeon_i2c_hlc_int_clear(i2c);
- octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
ret = octeon_i2c_hlc_wait(i2c);
if (ret)
goto err;
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
+ return octeon_i2c_check_status(i2c, false);
for (i = 0, j = msgs[1].len - 1; i < msgs[1].len && i < 4; i++, j--)
msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
if (msgs[1].len > 4) {
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT);
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI_EXT(i2c));
for (i = 0; i < msgs[1].len - 4 && i < 4; i++, j--)
msgs[1].buf[j] = (cmd >> (8 * i)) & 0xff;
}
@@ -730,27 +615,85 @@ static int octeon_i2c_hlc_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msg
set_ext = true;
}
if (set_ext)
- octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT);
+ octeon_i2c_writeq_flush(ext, i2c->twsi_base + SW_TWSI_EXT(i2c));
octeon_i2c_hlc_int_clear(i2c);
- octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI);
+ octeon_i2c_writeq_flush(cmd, i2c->twsi_base + SW_TWSI(i2c));
ret = octeon_i2c_hlc_wait(i2c);
if (ret)
goto err;
- cmd = __raw_readq(i2c->twsi_base + SW_TWSI);
+ cmd = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
if ((cmd & SW_TWSI_R) == 0)
- return -EAGAIN;
-
- ret = octeon_i2c_check_status(i2c, false);
+ return octeon_i2c_check_status(i2c, false);
err:
return ret;
}
+/**
+ * octeon_i2c_xfer - The driver's master_xfer function
+ * @adap: Pointer to the i2c_adapter structure
+ * @msgs: Pointer to the messages to be processed
+ * @num: Length of the MSGS array
+ *
+ * Returns the number of messages processed, or a negative errno on failure.
+ */
+int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+ int i, ret = 0;
+
+ if (num == 1) {
+ if (msgs[0].len > 0 && msgs[0].len <= 8) {
+ if (msgs[0].flags & I2C_M_RD)
+ ret = octeon_i2c_hlc_read(i2c, msgs);
+ else
+ ret = octeon_i2c_hlc_write(i2c, msgs);
+ goto out;
+ }
+ } else if (num == 2) {
+ if ((msgs[0].flags & I2C_M_RD) == 0 &&
+ (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
+ msgs[0].len > 0 && msgs[0].len <= 2 &&
+ msgs[1].len > 0 && msgs[1].len <= 8 &&
+ msgs[0].addr == msgs[1].addr) {
+ if (msgs[1].flags & I2C_M_RD)
+ ret = octeon_i2c_hlc_comp_read(i2c, msgs);
+ else
+ ret = octeon_i2c_hlc_comp_write(i2c, msgs);
+ goto out;
+ }
+ }
+
+ for (i = 0; ret == 0 && i < num; i++) {
+ struct i2c_msg *pmsg = &msgs[i];
+
+ /* zero-length messages are not supported */
+ if (!pmsg->len) {
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ ret = octeon_i2c_start(i2c);
+ if (ret)
+ return ret;
+
+ if (pmsg->flags & I2C_M_RD)
+ ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
+ &pmsg->len, pmsg->flags & I2C_M_RECV_LEN);
+ else
+ ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ }
+ octeon_i2c_stop(i2c);
+out:
+ return (ret != 0) ? ret : num;
+}
+
/* calculate and set clock divisors */
-static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
+void octeon_i2c_set_clock(struct octeon_i2c *i2c)
{
int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
@@ -791,7 +734,7 @@ static void octeon_i2c_set_clock(struct octeon_i2c *i2c)
octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
}
-static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
+int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
{
u8 status = 0;
int tries;
@@ -818,219 +761,6 @@ static int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c)
return 0;
}
-static int octeon_i2c_recovery(struct octeon_i2c *i2c)
-{
- int ret;
-
- ret = i2c_recover_bus(&i2c->adap);
- if (ret)
- /* recover failed, try hardware re-init */
- ret = octeon_i2c_init_lowlevel(i2c);
- return ret;
-}
-
-/**
- * octeon_i2c_start - send START to the bus
- * @i2c: The struct octeon_i2c
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_start(struct octeon_i2c *i2c)
-{
- int ret;
- u8 stat;
-
- octeon_i2c_hlc_disable(i2c);
-
- octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STA);
- ret = octeon_i2c_wait(i2c);
- if (ret)
- goto error;
-
- stat = octeon_i2c_stat_read(i2c);
- if (stat == STAT_START || stat == STAT_REP_START)
- /* START successful, bail out */
- return 0;
-
-error:
- /* START failed, try to recover */
- ret = octeon_i2c_recovery(i2c);
- return (ret) ? ret : -EAGAIN;
-}
-
-/* send STOP to the bus */
-static void octeon_i2c_stop(struct octeon_i2c *i2c)
-{
- octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_STP);
-}
-
-/**
- * octeon_i2c_write - send data to the bus via low-level controller
- * @i2c: The struct octeon_i2c
- * @target: Target address
- * @data: Pointer to the data to be sent
- * @length: Length of the data
- *
- * The address is sent over the bus, then the data.
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
- const u8 *data, int length)
-{
- int i, result;
-
- octeon_i2c_data_write(i2c, target << 1);
- octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
-
- result = octeon_i2c_wait(i2c);
- if (result)
- return result;
-
- for (i = 0; i < length; i++) {
- result = octeon_i2c_check_status(i2c, false);
- if (result)
- return result;
-
- octeon_i2c_data_write(i2c, data[i]);
- octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
-
- result = octeon_i2c_wait(i2c);
- if (result)
- return result;
- }
-
- return 0;
-}
-
-/**
- * octeon_i2c_read - receive data from the bus via low-level controller
- * @i2c: The struct octeon_i2c
- * @target: Target address
- * @data: Pointer to the location to store the data
- * @rlength: Length of the data
- * @recv_len: flag for length byte
- *
- * The address is sent over the bus, then the data is read.
- *
- * Returns 0 on success, otherwise a negative errno.
- */
-static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
- u8 *data, u16 *rlength, bool recv_len)
-{
- int i, result, length = *rlength;
- bool final_read = false;
-
- octeon_i2c_data_write(i2c, (target << 1) | 1);
- octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
-
- result = octeon_i2c_wait(i2c);
- if (result)
- return result;
-
- /* address OK ? */
- result = octeon_i2c_check_status(i2c, false);
- if (result)
- return result;
-
- for (i = 0; i < length; i++) {
- /*
- * For the last byte to receive TWSI_CTL_AAK must not be set.
- *
- * A special case is I2C_M_RECV_LEN where we don't know the
- * additional length yet. If recv_len is set we assume we're
- * not reading the final byte and therefore need to set
- * TWSI_CTL_AAK.
- */
- if ((i + 1 == length) && !(recv_len && i == 0))
- final_read = true;
-
- /* clear iflg to allow next event */
- if (final_read)
- octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
- else
- octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB | TWSI_CTL_AAK);
-
- result = octeon_i2c_wait(i2c);
- if (result)
- return result;
-
- data[i] = octeon_i2c_data_read(i2c);
- if (recv_len && i == 0) {
- if (data[i] > I2C_SMBUS_BLOCK_MAX + 1)
- return -EPROTO;
- length += data[i];
- }
-
- result = octeon_i2c_check_status(i2c, final_read);
- if (result)
- return result;
- }
- *rlength = length;
- return 0;
-}
-
-/**
- * octeon_i2c_xfer - The driver's master_xfer function
- * @adap: Pointer to the i2c_adapter structure
- * @msgs: Pointer to the messages to be processed
- * @num: Length of the MSGS array
- *
- * Returns the number of messages processed, or a negative errno on failure.
- */
-static int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
- int num)
-{
- struct octeon_i2c *i2c = i2c_get_adapdata(adap);
- int i, ret = 0;
-
- if (num == 1) {
- if (msgs[0].len > 0 && msgs[0].len <= 8) {
- if (msgs[0].flags & I2C_M_RD)
- ret = octeon_i2c_hlc_read(i2c, msgs);
- else
- ret = octeon_i2c_hlc_write(i2c, msgs);
- goto out;
- }
- } else if (num == 2) {
- if ((msgs[0].flags & I2C_M_RD) == 0 &&
- (msgs[1].flags & I2C_M_RECV_LEN) == 0 &&
- msgs[0].len > 0 && msgs[0].len <= 2 &&
- msgs[1].len > 0 && msgs[1].len <= 8 &&
- msgs[0].addr == msgs[1].addr) {
- if (msgs[1].flags & I2C_M_RD)
- ret = octeon_i2c_hlc_comp_read(i2c, msgs);
- else
- ret = octeon_i2c_hlc_comp_write(i2c, msgs);
- goto out;
- }
- }
-
- for (i = 0; ret == 0 && i < num; i++) {
- struct i2c_msg *pmsg = &msgs[i];
-
- /* zero-length messages are not supported */
- if (!pmsg->len) {
- ret = -EOPNOTSUPP;
- break;
- }
-
- ret = octeon_i2c_start(i2c);
- if (ret)
- return ret;
-
- if (pmsg->flags & I2C_M_RD)
- ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
- &pmsg->len, pmsg->flags & I2C_M_RECV_LEN);
- else
- ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
- pmsg->len);
- }
- octeon_i2c_stop(i2c);
-out:
- return (ret != 0) ? ret : num;
-}
-
static int octeon_i2c_get_scl(struct i2c_adapter *adap)
{
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
@@ -1044,7 +774,7 @@ static void octeon_i2c_set_scl(struct i2c_adapter *adap, int val)
{
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
- octeon_i2c_write_int(i2c, TWSI_INT_SCL_OVR);
+ octeon_i2c_write_int(i2c, val ? 0 : TWSI_INT_SCL_OVR);
}
static int octeon_i2c_get_sda(struct i2c_adapter *adap)
@@ -1060,13 +790,14 @@ static void octeon_i2c_prepare_recovery(struct i2c_adapter *adap)
{
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+ octeon_i2c_hlc_disable(i2c);
+
/*
- * The stop resets the state machine, does not _transmit_ STOP unless
- * engine was active.
+ * Bring control register to a good state regardless
+ * of HLC state.
*/
- octeon_i2c_stop(i2c);
+ octeon_i2c_ctl_write(i2c, TWSI_CTL_ENAB);
- octeon_i2c_hlc_disable(i2c);
octeon_i2c_write_int(i2c, 0);
}
@@ -1074,10 +805,19 @@ static void octeon_i2c_unprepare_recovery(struct i2c_adapter *adap)
{
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+ /*
+ * Generate STOP to finish the unfinished transaction.
+ * Can't generate STOP via the TWSI CTL register
+ * since it could bring the TWSI controller into an inoperable state.
+ */
+ octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR | TWSI_INT_SCL_OVR);
+ udelay(5);
+ octeon_i2c_write_int(i2c, TWSI_INT_SDA_OVR);
+ udelay(5);
octeon_i2c_write_int(i2c, 0);
}
-static struct i2c_bus_recovery_info octeon_i2c_recovery_info = {
+struct i2c_bus_recovery_info octeon_i2c_recovery_info = {
.recover_bus = i2c_generic_scl_recovery,
.get_scl = octeon_i2c_get_scl,
.set_scl = octeon_i2c_set_scl,
@@ -1085,171 +825,3 @@ static struct i2c_bus_recovery_info octeon_i2c_recovery_info = {
.prepare_recovery = octeon_i2c_prepare_recovery,
.unprepare_recovery = octeon_i2c_unprepare_recovery,
};
-
-static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
- I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
-}
-
-static const struct i2c_algorithm octeon_i2c_algo = {
- .master_xfer = octeon_i2c_xfer,
- .functionality = octeon_i2c_functionality,
-};
-
-static struct i2c_adapter octeon_i2c_ops = {
- .owner = THIS_MODULE,
- .name = "OCTEON adapter",
- .algo = &octeon_i2c_algo,
-};
-
-static int octeon_i2c_probe(struct platform_device *pdev)
-{
- struct device_node *node = pdev->dev.of_node;
- int irq, result = 0, hlc_irq = 0;
- struct resource *res_mem;
- struct octeon_i2c *i2c;
- bool cn78xx_style;
-
- cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
- if (cn78xx_style) {
- hlc_irq = platform_get_irq(pdev, 0);
- if (hlc_irq < 0)
- return hlc_irq;
-
- irq = platform_get_irq(pdev, 2);
- if (irq < 0)
- return irq;
- } else {
- /* All adaptors have an irq. */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
- }
-
- i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
- if (!i2c) {
- result = -ENOMEM;
- goto out;
- }
- i2c->dev = &pdev->dev;
-
- res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem);
- if (IS_ERR(i2c->twsi_base)) {
- result = PTR_ERR(i2c->twsi_base);
- goto out;
- }
-
- /*
- * "clock-rate" is a legacy binding, the official binding is
- * "clock-frequency". Try the official one first and then
- * fall back if it doesn't exist.
- */
- if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
- of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
- dev_err(i2c->dev,
- "no I2C 'clock-rate' or 'clock-frequency' property\n");
- result = -ENXIO;
- goto out;
- }
-
- i2c->sys_freq = octeon_get_io_clock_rate();
-
- init_waitqueue_head(&i2c->queue);
-
- i2c->irq = irq;
-
- if (cn78xx_style) {
- i2c->hlc_irq = hlc_irq;
-
- i2c->int_enable = octeon_i2c_int_enable78;
- i2c->int_disable = octeon_i2c_int_disable78;
- i2c->hlc_int_enable = octeon_i2c_hlc_int_enable78;
- i2c->hlc_int_disable = octeon_i2c_hlc_int_disable78;
-
- irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
- irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
-
- result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
- octeon_i2c_hlc_isr78, 0,
- DRV_NAME, i2c);
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto out;
- }
- } else {
- i2c->int_enable = octeon_i2c_int_enable;
- i2c->int_disable = octeon_i2c_int_disable;
- i2c->hlc_int_enable = octeon_i2c_hlc_int_enable;
- i2c->hlc_int_disable = octeon_i2c_int_disable;
- }
-
- result = devm_request_irq(&pdev->dev, i2c->irq,
- octeon_i2c_isr, 0, DRV_NAME, i2c);
- if (result < 0) {
- dev_err(i2c->dev, "failed to attach interrupt\n");
- goto out;
- }
-
- if (OCTEON_IS_MODEL(OCTEON_CN38XX))
- i2c->broken_irq_check = true;
-
- result = octeon_i2c_init_lowlevel(i2c);
- if (result) {
- dev_err(i2c->dev, "init low level failed\n");
- goto out;
- }
-
- octeon_i2c_set_clock(i2c);
-
- i2c->adap = octeon_i2c_ops;
- i2c->adap.timeout = msecs_to_jiffies(2);
- i2c->adap.retries = 5;
- i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
- i2c->adap.dev.parent = &pdev->dev;
- i2c->adap.dev.of_node = node;
- i2c_set_adapdata(&i2c->adap, i2c);
- platform_set_drvdata(pdev, i2c);
-
- result = i2c_add_adapter(&i2c->adap);
- if (result < 0) {
- dev_err(i2c->dev, "failed to add adapter\n");
- goto out;
- }
- dev_info(i2c->dev, "probed\n");
- return 0;
-
-out:
- return result;
-};
-
-static int octeon_i2c_remove(struct platform_device *pdev)
-{
- struct octeon_i2c *i2c = platform_get_drvdata(pdev);
-
- i2c_del_adapter(&i2c->adap);
- return 0;
-};
-
-static const struct of_device_id octeon_i2c_match[] = {
- { .compatible = "cavium,octeon-3860-twsi", },
- { .compatible = "cavium,octeon-7890-twsi", },
- {},
-};
-MODULE_DEVICE_TABLE(of, octeon_i2c_match);
-
-static struct platform_driver octeon_i2c_driver = {
- .probe = octeon_i2c_probe,
- .remove = octeon_i2c_remove,
- .driver = {
- .name = DRV_NAME,
- .of_match_table = octeon_i2c_match,
- },
-};
-
-module_platform_driver(octeon_i2c_driver);
-
-MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
-MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
-MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h
new file mode 100644
index 000000000000..1db7c835a454
--- /dev/null
+++ b/drivers/i2c/busses/i2c-octeon-core.h
@@ -0,0 +1,216 @@
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+/* Controller command patterns */
+#define SW_TWSI_V BIT_ULL(63) /* Valid bit */
+#define SW_TWSI_EIA BIT_ULL(61) /* Extended internal address */
+#define SW_TWSI_R BIT_ULL(56) /* Result or read bit */
+#define SW_TWSI_SOVR BIT_ULL(55) /* Size override */
+#define SW_TWSI_SIZE_SHIFT 52
+#define SW_TWSI_ADDR_SHIFT 40
+#define SW_TWSI_IA_SHIFT 32 /* Internal address */
+
+/* Controller opcode word (bits 60:57) */
+#define SW_TWSI_OP_SHIFT 57
+#define SW_TWSI_OP_7 (0ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_7_IA (1ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_10 (2ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_10_IA (3ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_TWSI_CLK (4ULL << SW_TWSI_OP_SHIFT)
+#define SW_TWSI_OP_EOP (6ULL << SW_TWSI_OP_SHIFT) /* Extended opcode */
+
+/* Controller extended opcode word (bits 34:32) */
+#define SW_TWSI_EOP_SHIFT 32
+#define SW_TWSI_EOP_TWSI_DATA (SW_TWSI_OP_EOP | 1ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_CTL (SW_TWSI_OP_EOP | 2ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_CLKCTL (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_STAT (SW_TWSI_OP_EOP | 3ULL << SW_TWSI_EOP_SHIFT)
+#define SW_TWSI_EOP_TWSI_RST (SW_TWSI_OP_EOP | 7ULL << SW_TWSI_EOP_SHIFT)
+
+/* Controller command and status bits */
+#define TWSI_CTL_CE 0x80 /* High level controller enable */
+#define TWSI_CTL_ENAB 0x40 /* Bus enable */
+#define TWSI_CTL_STA 0x20 /* Master-mode start, HW clears when done */
+#define TWSI_CTL_STP 0x10 /* Master-mode stop, HW clears when done */
+#define TWSI_CTL_IFLG 0x08 /* HW event, SW writes 0 to ACK */
+#define TWSI_CTL_AAK 0x04 /* Assert ACK */
+
+/* Status values */
+#define STAT_ERROR 0x00
+#define STAT_START 0x08
+#define STAT_REP_START 0x10
+#define STAT_TXADDR_ACK 0x18
+#define STAT_TXADDR_NAK 0x20
+#define STAT_TXDATA_ACK 0x28
+#define STAT_TXDATA_NAK 0x30
+#define STAT_LOST_ARB_38 0x38
+#define STAT_RXADDR_ACK 0x40
+#define STAT_RXADDR_NAK 0x48
+#define STAT_RXDATA_ACK 0x50
+#define STAT_RXDATA_NAK 0x58
+#define STAT_SLAVE_60 0x60
+#define STAT_LOST_ARB_68 0x68
+#define STAT_SLAVE_70 0x70
+#define STAT_LOST_ARB_78 0x78
+#define STAT_SLAVE_80 0x80
+#define STAT_SLAVE_88 0x88
+#define STAT_GENDATA_ACK 0x90
+#define STAT_GENDATA_NAK 0x98
+#define STAT_SLAVE_A0 0xA0
+#define STAT_SLAVE_A8 0xA8
+#define STAT_LOST_ARB_B0 0xB0
+#define STAT_SLAVE_LOST 0xB8
+#define STAT_SLAVE_NAK 0xC0
+#define STAT_SLAVE_ACK 0xC8
+#define STAT_AD2W_ACK 0xD0
+#define STAT_AD2W_NAK 0xD8
+#define STAT_IDLE 0xF8
+
+/* TWSI_INT values */
+#define TWSI_INT_ST_INT BIT_ULL(0)
+#define TWSI_INT_TS_INT BIT_ULL(1)
+#define TWSI_INT_CORE_INT BIT_ULL(2)
+#define TWSI_INT_ST_EN BIT_ULL(4)
+#define TWSI_INT_TS_EN BIT_ULL(5)
+#define TWSI_INT_CORE_EN BIT_ULL(6)
+#define TWSI_INT_SDA_OVR BIT_ULL(8)
+#define TWSI_INT_SCL_OVR BIT_ULL(9)
+#define TWSI_INT_SDA BIT_ULL(10)
+#define TWSI_INT_SCL BIT_ULL(11)
+
+#define I2C_OCTEON_EVENT_WAIT 80 /* microseconds */
+
+/* Register offsets */
+struct octeon_i2c_reg_offset {
+ unsigned int sw_twsi;
+ unsigned int twsi_int;
+ unsigned int sw_twsi_ext;
+};
+
+#define SW_TWSI(x) (x->roff.sw_twsi)
+#define TWSI_INT(x) (x->roff.twsi_int)
+#define SW_TWSI_EXT(x) (x->roff.sw_twsi_ext)
+
+struct octeon_i2c {
+ wait_queue_head_t queue;
+ struct i2c_adapter adap;
+ struct octeon_i2c_reg_offset roff;
+ struct clk *clk;
+ int irq;
+ int hlc_irq; /* For cn7890 only */
+ u32 twsi_freq;
+ int sys_freq;
+ void __iomem *twsi_base;
+ struct device *dev;
+ bool hlc_enabled;
+ bool broken_irq_mode;
+ bool broken_irq_check;
+ void (*int_enable)(struct octeon_i2c *);
+ void (*int_disable)(struct octeon_i2c *);
+ void (*hlc_int_enable)(struct octeon_i2c *);
+ void (*hlc_int_disable)(struct octeon_i2c *);
+ atomic_t int_enable_cnt;
+ atomic_t hlc_int_enable_cnt;
+#if IS_ENABLED(CONFIG_I2C_THUNDERX)
+ struct msix_entry i2c_msix;
+#endif
+ struct i2c_smbus_alert_setup alert_data;
+ struct i2c_client *ara;
+};
+
+static inline void octeon_i2c_writeq_flush(u64 val, void __iomem *addr)
+{
+ __raw_writeq(val, addr);
+ __raw_readq(addr); /* wait for write to land */
+}
+
+/**
+ * octeon_i2c_reg_write - write an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ * @data: Value to be written
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static inline void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8 data)
+{
+ u64 tmp;
+
+ __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI(i2c));
+
+ readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp, tmp & SW_TWSI_V,
+ I2C_OCTEON_EVENT_WAIT, i2c->adap.timeout);
+}
+
+#define octeon_i2c_ctl_write(i2c, val) \
+ octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_CTL, val)
+#define octeon_i2c_data_write(i2c, val) \
+ octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_DATA, val)
+
+/**
+ * octeon_i2c_reg_read - read lower bits of an I2C core register
+ * @i2c: The struct octeon_i2c
+ * @eop_reg: Register selector
+ *
+ * Returns the data.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static inline int octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg,
+ int *error)
+{
+ u64 tmp;
+ int ret;
+
+ __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI(i2c));
+
+ ret = readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp,
+ tmp & SW_TWSI_V, I2C_OCTEON_EVENT_WAIT,
+ i2c->adap.timeout);
+ if (error)
+ *error = ret;
+ return tmp & 0xFF;
+}
+
+#define octeon_i2c_ctl_read(i2c) \
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL, NULL)
+#define octeon_i2c_data_read(i2c, error) \
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA, error)
+#define octeon_i2c_stat_read(i2c) \
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT, NULL)
+
+/**
+ * octeon_i2c_read_int - read the TWSI_INT register
+ * @i2c: The struct octeon_i2c
+ *
+ * Returns the value of the register.
+ */
+static inline u64 octeon_i2c_read_int(struct octeon_i2c *i2c)
+{
+ return __raw_readq(i2c->twsi_base + TWSI_INT(i2c));
+}
+
+/**
+ * octeon_i2c_write_int - write the TWSI_INT register
+ * @i2c: The struct octeon_i2c
+ * @data: Value to be written
+ */
+static inline void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+{
+ octeon_i2c_writeq_flush(data, i2c->twsi_base + TWSI_INT(i2c));
+}
+
+/* Prototypes */
+irqreturn_t octeon_i2c_isr(int irq, void *dev_id);
+int octeon_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
+int octeon_i2c_init_lowlevel(struct octeon_i2c *i2c);
+void octeon_i2c_set_clock(struct octeon_i2c *i2c);
+extern struct i2c_bus_recovery_info octeon_i2c_recovery_info;
diff --git a/drivers/i2c/busses/i2c-octeon-platdrv.c b/drivers/i2c/busses/i2c-octeon-platdrv.c
new file mode 100644
index 000000000000..917524ce6890
--- /dev/null
+++ b/drivers/i2c/busses/i2c-octeon-platdrv.c
@@ -0,0 +1,286 @@
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 - 2016 Cavium, Inc.
+ *
+ * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/atomic.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <asm/octeon/octeon.h>
+#include "i2c-octeon-core.h"
+
+#define DRV_NAME "i2c-octeon"
+
+/**
+ * octeon_i2c_int_enable - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, TWSI_INT_CORE_EN);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
+{
+ /* clear TS/ST/IFLG events */
+ octeon_i2c_write_int(i2c, 0);
+}
+
+/**
+ * octeon_i2c_int_enable78 - enable the CORE interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable78(struct octeon_i2c *i2c)
+{
+ atomic_inc_return(&i2c->int_enable_cnt);
+ enable_irq(i2c->irq);
+}
+
+static void __octeon_i2c_irq_disable(atomic_t *cnt, int irq)
+{
+ int count;
+
+ /*
+ * The interrupt can be disabled in two places, but we only
+ * want to make the disable_irq_nosync() call once, so keep
+ * track with the atomic variable.
+ */
+ count = atomic_dec_if_positive(cnt);
+ if (count >= 0)
+ disable_irq_nosync(irq);
+}
+
+/* disable the CORE interrupt */
+static void octeon_i2c_int_disable78(struct octeon_i2c *i2c)
+{
+ __octeon_i2c_irq_disable(&i2c->int_enable_cnt, i2c->irq);
+}
+
+/**
+ * octeon_i2c_hlc_int_enable78 - enable the ST interrupt
+ * @i2c: The struct octeon_i2c
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_hlc_int_enable78(struct octeon_i2c *i2c)
+{
+ atomic_inc_return(&i2c->hlc_int_enable_cnt);
+ enable_irq(i2c->hlc_irq);
+}
+
+/* disable the ST interrupt */
+static void octeon_i2c_hlc_int_disable78(struct octeon_i2c *i2c)
+{
+ __octeon_i2c_irq_disable(&i2c->hlc_int_enable_cnt, i2c->hlc_irq);
+}
+
+/* HLC interrupt service routine */
+static irqreturn_t octeon_i2c_hlc_isr78(int irq, void *dev_id)
+{
+ struct octeon_i2c *i2c = dev_id;
+
+ i2c->hlc_int_disable(i2c);
+ wake_up(&i2c->queue);
+
+ return IRQ_HANDLED;
+}
+
+static void octeon_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, TWSI_INT_ST_EN);
+}
+
+static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm octeon_i2c_algo = {
+ .master_xfer = octeon_i2c_xfer,
+ .functionality = octeon_i2c_functionality,
+};
+
+static struct i2c_adapter octeon_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "OCTEON adapter",
+ .algo = &octeon_i2c_algo,
+};
+
+static int octeon_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ int irq, result = 0, hlc_irq = 0;
+ struct resource *res_mem;
+ struct octeon_i2c *i2c;
+ bool cn78xx_style;
+
+ cn78xx_style = of_device_is_compatible(node, "cavium,octeon-7890-twsi");
+ if (cn78xx_style) {
+ hlc_irq = platform_get_irq(pdev, 0);
+ if (hlc_irq < 0)
+ return hlc_irq;
+
+ irq = platform_get_irq(pdev, 2);
+ if (irq < 0)
+ return irq;
+ } else {
+ /* All adaptors have an irq. */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+ }
+
+ i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c) {
+ result = -ENOMEM;
+ goto out;
+ }
+ i2c->dev = &pdev->dev;
+
+ i2c->roff.sw_twsi = 0x00;
+ i2c->roff.twsi_int = 0x10;
+ i2c->roff.sw_twsi_ext = 0x18;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i2c->twsi_base = devm_ioremap_resource(&pdev->dev, res_mem);
+ if (IS_ERR(i2c->twsi_base)) {
+ result = PTR_ERR(i2c->twsi_base);
+ goto out;
+ }
+
+ /*
+ * "clock-rate" is a legacy binding, the official binding is
+ * "clock-frequency". Try the official one first and then
+ * fall back if it doesn't exist.
+ */
+ if (of_property_read_u32(node, "clock-frequency", &i2c->twsi_freq) &&
+ of_property_read_u32(node, "clock-rate", &i2c->twsi_freq)) {
+ dev_err(i2c->dev,
+ "no I2C 'clock-rate' or 'clock-frequency' property\n");
+ result = -ENXIO;
+ goto out;
+ }
+
+ i2c->sys_freq = octeon_get_io_clock_rate();
+
+ init_waitqueue_head(&i2c->queue);
+
+ i2c->irq = irq;
+
+ if (cn78xx_style) {
+ i2c->hlc_irq = hlc_irq;
+
+ i2c->int_enable = octeon_i2c_int_enable78;
+ i2c->int_disable = octeon_i2c_int_disable78;
+ i2c->hlc_int_enable = octeon_i2c_hlc_int_enable78;
+ i2c->hlc_int_disable = octeon_i2c_hlc_int_disable78;
+
+ irq_set_status_flags(i2c->irq, IRQ_NOAUTOEN);
+ irq_set_status_flags(i2c->hlc_irq, IRQ_NOAUTOEN);
+
+ result = devm_request_irq(&pdev->dev, i2c->hlc_irq,
+ octeon_i2c_hlc_isr78, 0,
+ DRV_NAME, i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
+ } else {
+ i2c->int_enable = octeon_i2c_int_enable;
+ i2c->int_disable = octeon_i2c_int_disable;
+ i2c->hlc_int_enable = octeon_i2c_hlc_int_enable;
+ i2c->hlc_int_disable = octeon_i2c_int_disable;
+ }
+
+ result = devm_request_irq(&pdev->dev, i2c->irq,
+ octeon_i2c_isr, 0, DRV_NAME, i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto out;
+ }
+
+ if (OCTEON_IS_MODEL(OCTEON_CN38XX))
+ i2c->broken_irq_check = true;
+
+ result = octeon_i2c_init_lowlevel(i2c);
+ if (result) {
+ dev_err(i2c->dev, "init low level failed\n");
+ goto out;
+ }
+
+ octeon_i2c_set_clock(i2c);
+
+ i2c->adap = octeon_i2c_ops;
+ i2c->adap.timeout = msecs_to_jiffies(2);
+ i2c->adap.retries = 5;
+ i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
+ i2c->adap.dev.parent = &pdev->dev;
+ i2c->adap.dev.of_node = node;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ platform_set_drvdata(pdev, i2c);
+
+ result = i2c_add_adapter(&i2c->adap);
+ if (result < 0)
+ goto out;
+ dev_info(i2c->dev, "probed\n");
+ return 0;
+
+out:
+ return result;
+};
+
+static int octeon_i2c_remove(struct platform_device *pdev)
+{
+ struct octeon_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ return 0;
+};
+
+static const struct of_device_id octeon_i2c_match[] = {
+ { .compatible = "cavium,octeon-3860-twsi", },
+ { .compatible = "cavium,octeon-7890-twsi", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, octeon_i2c_match);
+
+static struct platform_driver octeon_i2c_driver = {
+ .probe = octeon_i2c_probe,
+ .remove = octeon_i2c_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = octeon_i2c_match,
+ },
+};
+
+module_platform_driver(octeon_i2c_driver);
+
+MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ab1279b8e240..c7da0c42baee 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1425,10 +1425,8 @@ omap_i2c_probe(struct platform_device *pdev)
/* i2c device drivers may be active on return from add_adapter() */
adap->nr = pdev->id;
r = i2c_add_numbered_adapter(adap);
- if (r) {
- dev_err(omap->dev, "failure adding adapter\n");
+ if (r)
goto err_unuse_clocks;
- }
dev_info(omap->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
major, minor, omap->speed);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 23d1c167b5d7..c2268cdf38e8 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -694,7 +694,6 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
retval = i2c_add_adapter(adap);
if (retval) {
- dev_err(&dev->dev, "Couldn't register adapter!\n");
kfree(adapdata);
kfree(adap);
release_region(smba, SMBIOSIZE);
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 2c40edbf6224..217c78711d65 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -329,10 +329,8 @@ static int pmcmsptwi_probe(struct platform_device *pldev)
i2c_set_adapdata(&pmcmsptwi_adapter, &pmcmsptwi_data);
rc = i2c_add_adapter(&pmcmsptwi_adapter);
- if (rc) {
- dev_err(&pldev->dev, "Unable to register I2C adapter\n");
+ if (rc)
goto ret_unmap;
- }
return 0;
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 7ea67aa46fb7..fd5f9d2bf6d9 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -714,10 +714,8 @@ static int i2c_pnx_probe(struct platform_device *pdev)
/* Register this adapter with the I2C subsystem */
ret = i2c_add_numbered_adapter(&alg_data->adapter);
- if (ret < 0) {
- dev_err(&pdev->dev, "I2C: Failed to add bus\n");
+ if (ret < 0)
goto out_clock;
- }
dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
alg_data->adapter.name, res->start, alg_data->irq);
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
index 82b6f02544da..0c8b1571886d 100644
--- a/drivers/i2c/busses/i2c-puv3.c
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -212,11 +212,8 @@ static int puv3_i2c_probe(struct platform_device *pdev)
adapter->nr = pdev->id;
rc = i2c_add_numbered_adapter(adapter);
- if (rc) {
- dev_err(&pdev->dev, "Adapter '%s' registration failed\n",
- adapter->name);
+ if (rc)
goto fail_add_adapter;
- }
dev_info(&pdev->dev, "PKUnity v3 i2c bus adapter.\n");
return 0;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 0d351954db02..e28b825b0433 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1292,10 +1292,8 @@ static int i2c_pxa_probe(struct platform_device *dev)
#endif
ret = i2c_add_numbered_adapter(&i2c->adap);
- if (ret < 0) {
- dev_err(&dev->dev, "failed to add bus: %d\n", ret);
+ if (ret < 0)
goto ereqirq;
- }
platform_set_drvdata(dev, i2c);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 9bd849dacee8..726615e54f2a 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -802,6 +802,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
{ .compatible = "renesas,i2c-r8a7793", .data = (void *)I2C_RCAR_GEN2 },
{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },
+ { .compatible = "renesas,i2c-r8a7796", .data = (void *)I2C_RCAR_GEN3 },
{},
};
MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
@@ -875,10 +876,8 @@ static int rcar_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
ret = i2c_add_numbered_adapter(adap);
- if (ret < 0) {
- dev_err(dev, "reg adap failed: %d\n", ret);
+ if (ret < 0)
goto out_pm_disable;
- }
dev_info(dev, "probed\n");
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index d7e3af671543..6263ea82d6ac 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -383,10 +383,8 @@ static int riic_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(adap);
- if (ret) {
- dev_err(&pdev->dev, "failed to add adapter\n");
+ if (ret)
return ret;
- }
platform_set_drvdata(pdev, riic);
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 5c5b7cada8be..50702c7bb244 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -58,7 +58,7 @@ enum {
#define REG_CON_LASTACK BIT(5) /* 1: send NACK after last received byte */
#define REG_CON_ACTACK BIT(6) /* 1: stop if NACK is received */
-#define REG_CON_TUNING_MASK GENMASK(15, 8)
+#define REG_CON_TUNING_MASK GENMASK_ULL(15, 8)
#define REG_CON_SDA_CFG(cfg) ((cfg) << 8)
#define REG_CON_STA_CFG(cfg) ((cfg) << 12)
@@ -742,7 +742,7 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
struct i2c_timings *t,
struct rk3x_i2c_calced_timings *t_calc)
{
- unsigned long min_low_ns, min_high_ns, min_total_ns;
+ unsigned long min_low_ns, min_high_ns;
unsigned long min_setup_start_ns, min_setup_data_ns;
unsigned long min_setup_stop_ns, max_hold_data_ns;
@@ -793,7 +793,6 @@ static int rk3x_i2c_v1_calc_timings(unsigned long clk_rate,
/* These are the min dividers needed for min hold times. */
min_div_for_hold = (min_low_div + min_high_div);
- min_total_ns = min_low_ns + min_high_ns;
/*
* This is the maximum divider so we don't go over the maximum.
@@ -1312,10 +1311,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
rk3x_i2c_adapt_div(i2c, clk_rate);
ret = i2c_add_adapter(&i2c->adap);
- if (ret < 0) {
- dev_err(&pdev->dev, "Could not register adapter\n");
+ if (ret < 0)
goto err_clk_notifier;
- }
dev_info(&pdev->dev, "Initialized RK3xxx I2C bus at %p\n", i2c->regs);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 38dc1cacfd8b..499af26e736e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1215,7 +1215,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
- dev_err(&pdev->dev, "failed to add bus to i2c core\n");
pm_runtime_disable(&pdev->dev);
s3c24xx_i2c_deregister_cpufreq(i2c);
clk_unprepare(i2c->clk);
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 24968384b401..c2005c789d2b 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -510,10 +510,8 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
}
ret = i2c_add_numbered_adapter(&id->adap);
- if (ret < 0) {
- dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
+ if (ret < 0)
goto out4;
- }
platform_set_drvdata(pdev, id);
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 05b1eeab9cf5..192f36f00e4d 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -981,7 +981,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
ret = i2c_add_numbered_adapter(adap);
if (ret < 0) {
sh_mobile_i2c_release_dma(pd);
- dev_err(&dev->dev, "cannot add numbered adapter\n");
return ret;
}
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index 792a42bdd335..95e81d0f72b4 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -387,10 +387,8 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
writel(regval, siic->base + SIRFSOC_I2C_SDA_DELAY);
err = i2c_add_numbered_adapter(adap);
- if (err < 0) {
- dev_err(&pdev->dev, "Can't add new i2c adapter\n");
+ if (err < 0)
goto out;
- }
clk_disable(clk);
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 944ec4205084..1371547ce1a3 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -874,10 +874,8 @@ static int st_i2c_probe(struct platform_device *pdev)
init_completion(&i2c_dev->complete);
ret = i2c_add_adapter(adap);
- if (ret) {
- dev_err(&pdev->dev, "Failed to add adapter\n");
+ if (ret)
return ret;
- }
platform_set_drvdata(pdev, i2c_dev);
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 460c134832ac..dc63236b45b2 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -920,11 +920,8 @@ static int stu300_probe(struct platform_device *pdev)
/* i2c device drivers may be active on return from add_adapter() */
ret = i2c_add_numbered_adapter(adap);
- if (ret) {
- dev_err(&pdev->dev, "failure adding ST Micro DDC "
- "I2C adapter\n");
+ if (ret)
return ret;
- }
platform_set_drvdata(pdev, dev);
dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index b126dbaa47e3..4af9bbae20df 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -28,6 +28,9 @@
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/reset.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/iopoll.h>
#include <asm/unaligned.h>
@@ -36,21 +39,21 @@
#define I2C_CNFG 0x000
#define I2C_CNFG_DEBOUNCE_CNT_SHIFT 12
-#define I2C_CNFG_PACKET_MODE_EN (1<<10)
-#define I2C_CNFG_NEW_MASTER_FSM (1<<11)
-#define I2C_CNFG_MULTI_MASTER_MODE (1<<17)
+#define I2C_CNFG_PACKET_MODE_EN BIT(10)
+#define I2C_CNFG_NEW_MASTER_FSM BIT(11)
+#define I2C_CNFG_MULTI_MASTER_MODE BIT(17)
#define I2C_STATUS 0x01C
#define I2C_SL_CNFG 0x020
-#define I2C_SL_CNFG_NACK (1<<1)
-#define I2C_SL_CNFG_NEWSL (1<<2)
+#define I2C_SL_CNFG_NACK BIT(1)
+#define I2C_SL_CNFG_NEWSL BIT(2)
#define I2C_SL_ADDR1 0x02c
#define I2C_SL_ADDR2 0x030
#define I2C_TX_FIFO 0x050
#define I2C_RX_FIFO 0x054
#define I2C_PACKET_TRANSFER_STATUS 0x058
#define I2C_FIFO_CONTROL 0x05c
-#define I2C_FIFO_CONTROL_TX_FLUSH (1<<1)
-#define I2C_FIFO_CONTROL_RX_FLUSH (1<<0)
+#define I2C_FIFO_CONTROL_TX_FLUSH BIT(1)
+#define I2C_FIFO_CONTROL_RX_FLUSH BIT(0)
#define I2C_FIFO_CONTROL_TX_TRIG_SHIFT 5
#define I2C_FIFO_CONTROL_RX_TRIG_SHIFT 2
#define I2C_FIFO_STATUS 0x060
@@ -60,26 +63,26 @@
#define I2C_FIFO_STATUS_RX_SHIFT 0
#define I2C_INT_MASK 0x064
#define I2C_INT_STATUS 0x068
-#define I2C_INT_PACKET_XFER_COMPLETE (1<<7)
-#define I2C_INT_ALL_PACKETS_XFER_COMPLETE (1<<6)
-#define I2C_INT_TX_FIFO_OVERFLOW (1<<5)
-#define I2C_INT_RX_FIFO_UNDERFLOW (1<<4)
-#define I2C_INT_NO_ACK (1<<3)
-#define I2C_INT_ARBITRATION_LOST (1<<2)
-#define I2C_INT_TX_FIFO_DATA_REQ (1<<1)
-#define I2C_INT_RX_FIFO_DATA_REQ (1<<0)
+#define I2C_INT_PACKET_XFER_COMPLETE BIT(7)
+#define I2C_INT_ALL_PACKETS_XFER_COMPLETE BIT(6)
+#define I2C_INT_TX_FIFO_OVERFLOW BIT(5)
+#define I2C_INT_RX_FIFO_UNDERFLOW BIT(4)
+#define I2C_INT_NO_ACK BIT(3)
+#define I2C_INT_ARBITRATION_LOST BIT(2)
+#define I2C_INT_TX_FIFO_DATA_REQ BIT(1)
+#define I2C_INT_RX_FIFO_DATA_REQ BIT(0)
#define I2C_CLK_DIVISOR 0x06c
#define I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT 16
#define I2C_CLK_MULTIPLIER_STD_FAST_MODE 8
#define DVC_CTRL_REG1 0x000
-#define DVC_CTRL_REG1_INTR_EN (1<<10)
+#define DVC_CTRL_REG1_INTR_EN BIT(10)
#define DVC_CTRL_REG2 0x004
#define DVC_CTRL_REG3 0x008
-#define DVC_CTRL_REG3_SW_PROG (1<<26)
-#define DVC_CTRL_REG3_I2C_DONE_INTR_EN (1<<30)
+#define DVC_CTRL_REG3_SW_PROG BIT(26)
+#define DVC_CTRL_REG3_I2C_DONE_INTR_EN BIT(30)
#define DVC_STATUS 0x00c
-#define DVC_STATUS_I2C_DONE_INTR (1<<30)
+#define DVC_STATUS_I2C_DONE_INTR BIT(30)
#define I2C_ERR_NONE 0x00
#define I2C_ERR_NO_ACK 0x01
@@ -89,26 +92,28 @@
#define PACKET_HEADER0_HEADER_SIZE_SHIFT 28
#define PACKET_HEADER0_PACKET_ID_SHIFT 16
#define PACKET_HEADER0_CONT_ID_SHIFT 12
-#define PACKET_HEADER0_PROTOCOL_I2C (1<<4)
-
-#define I2C_HEADER_HIGHSPEED_MODE (1<<22)
-#define I2C_HEADER_CONT_ON_NAK (1<<21)
-#define I2C_HEADER_SEND_START_BYTE (1<<20)
-#define I2C_HEADER_READ (1<<19)
-#define I2C_HEADER_10BIT_ADDR (1<<18)
-#define I2C_HEADER_IE_ENABLE (1<<17)
-#define I2C_HEADER_REPEAT_START (1<<16)
-#define I2C_HEADER_CONTINUE_XFER (1<<15)
+#define PACKET_HEADER0_PROTOCOL_I2C BIT(4)
+
+#define I2C_HEADER_HIGHSPEED_MODE BIT(22)
+#define I2C_HEADER_CONT_ON_NAK BIT(21)
+#define I2C_HEADER_SEND_START_BYTE BIT(20)
+#define I2C_HEADER_READ BIT(19)
+#define I2C_HEADER_10BIT_ADDR BIT(18)
+#define I2C_HEADER_IE_ENABLE BIT(17)
+#define I2C_HEADER_REPEAT_START BIT(16)
+#define I2C_HEADER_CONTINUE_XFER BIT(15)
#define I2C_HEADER_MASTER_ADDR_SHIFT 12
#define I2C_HEADER_SLAVE_ADDR_SHIFT 1
#define I2C_CONFIG_LOAD 0x08C
-#define I2C_MSTR_CONFIG_LOAD (1 << 0)
-#define I2C_SLV_CONFIG_LOAD (1 << 1)
-#define I2C_TIMEOUT_CONFIG_LOAD (1 << 2)
+#define I2C_MSTR_CONFIG_LOAD BIT(0)
+#define I2C_SLV_CONFIG_LOAD BIT(1)
+#define I2C_TIMEOUT_CONFIG_LOAD BIT(2)
#define I2C_CLKEN_OVERRIDE 0x090
-#define I2C_MST_CORE_CLKEN_OVR (1 << 0)
+#define I2C_MST_CORE_CLKEN_OVR BIT(0)
+
+#define I2C_CONFIG_LOAD_TIMEOUT 1000000
/*
* msg_end_type: The bus control which need to be send at end of transfer.
@@ -191,9 +196,11 @@ struct tegra_i2c_dev {
u16 clk_divisor_non_hs_mode;
bool is_suspended;
bool is_multimaster_mode;
+ spinlock_t xfer_lock;
};
-static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg)
+static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
+ unsigned long reg)
{
writel(val, i2c_dev->base + reg);
}
@@ -244,15 +251,17 @@ static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
static void tegra_i2c_mask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
{
- u32 int_mask = i2c_readl(i2c_dev, I2C_INT_MASK);
- int_mask &= ~mask;
+ u32 int_mask;
+
+ int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) & ~mask;
i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
}
static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
{
- u32 int_mask = i2c_readl(i2c_dev, I2C_INT_MASK);
- int_mask |= mask;
+ u32 int_mask;
+
+ int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) | mask;
i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
}
@@ -260,6 +269,7 @@ static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
{
unsigned long timeout = jiffies + HZ;
u32 val = i2c_readl(i2c_dev, I2C_FIFO_CONTROL);
+
val |= I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH;
i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
@@ -385,7 +395,8 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
*/
static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
{
- u32 val = 0;
+ u32 val;
+
val = dvc_readl(i2c_dev, DVC_CTRL_REG3);
val |= DVC_CTRL_REG3_SW_PROG;
val |= DVC_CTRL_REG3_I2C_DONE_INTR_EN;
@@ -396,9 +407,15 @@ static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
}
-static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev)
+static int tegra_i2c_runtime_resume(struct device *dev)
{
+ struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
int ret;
+
+ ret = pinctrl_pm_select_default_state(i2c_dev->dev);
+ if (ret)
+ return ret;
+
if (!i2c_dev->hw->has_single_clk_source) {
ret = clk_enable(i2c_dev->fast_clk);
if (ret < 0) {
@@ -407,32 +424,66 @@ static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev)
return ret;
}
}
+
ret = clk_enable(i2c_dev->div_clk);
if (ret < 0) {
dev_err(i2c_dev->dev,
"Enabling div clk failed, err %d\n", ret);
clk_disable(i2c_dev->fast_clk);
+ return ret;
}
- return ret;
+
+ return 0;
}
-static inline void tegra_i2c_clock_disable(struct tegra_i2c_dev *i2c_dev)
+static int tegra_i2c_runtime_suspend(struct device *dev)
{
+ struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
clk_disable(i2c_dev->div_clk);
if (!i2c_dev->hw->has_single_clk_source)
clk_disable(i2c_dev->fast_clk);
+
+ return pinctrl_pm_select_idle_state(i2c_dev->dev);
+}
+
+static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
+{
+ unsigned long reg_offset;
+ void __iomem *addr;
+ u32 val;
+ int err;
+
+ if (i2c_dev->hw->has_config_load_reg) {
+ reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
+ addr = i2c_dev->base + reg_offset;
+ i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
+ if (in_interrupt())
+ err = readl_poll_timeout_atomic(addr, val, val == 0,
+ 1000, I2C_CONFIG_LOAD_TIMEOUT);
+ else
+ err = readl_poll_timeout(addr, val, val == 0,
+ 1000, I2C_CONFIG_LOAD_TIMEOUT);
+
+ if (err) {
+ dev_warn(i2c_dev->dev,
+ "timeout waiting for config load\n");
+ return err;
+ }
+ }
+
+ return 0;
}
static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
{
u32 val;
- int err = 0;
+ int err;
u32 clk_divisor;
- unsigned long timeout = jiffies + HZ;
- err = tegra_i2c_clock_enable(i2c_dev);
+ err = pm_runtime_get_sync(i2c_dev->dev);
if (err < 0) {
- dev_err(i2c_dev->dev, "Clock enable failed %d\n", err);
+ dev_err(i2c_dev->dev, "runtime resume failed %d\n", err);
return err;
}
@@ -460,54 +511,59 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
if (!i2c_dev->is_dvc) {
u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
+
sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG);
i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1);
i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
-
}
val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
- if (tegra_i2c_flush_fifos(i2c_dev))
- err = -ETIMEDOUT;
+ err = tegra_i2c_flush_fifos(i2c_dev);
+ if (err)
+ goto err;
if (i2c_dev->is_multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
- if (i2c_dev->hw->has_config_load_reg) {
- i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
- while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) {
- if (time_after(jiffies, timeout)) {
- dev_warn(i2c_dev->dev,
- "timeout waiting for config load\n");
- err = -ETIMEDOUT;
- goto err;
- }
- msleep(1);
- }
- }
+ err = tegra_i2c_wait_for_config_load(i2c_dev);
+ if (err)
+ goto err;
if (i2c_dev->irq_disabled) {
- i2c_dev->irq_disabled = 0;
+ i2c_dev->irq_disabled = false;
enable_irq(i2c_dev->irq);
}
err:
- tegra_i2c_clock_disable(i2c_dev);
+ pm_runtime_put(i2c_dev->dev);
return err;
}
+static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
+{
+ u32 cnfg;
+
+ cnfg = i2c_readl(i2c_dev, I2C_CNFG);
+ if (cnfg & I2C_CNFG_PACKET_MODE_EN)
+ i2c_writel(i2c_dev, cnfg & ~I2C_CNFG_PACKET_MODE_EN, I2C_CNFG);
+
+ return tegra_i2c_wait_for_config_load(i2c_dev);
+}
+
static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
{
u32 status;
const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
struct tegra_i2c_dev *i2c_dev = dev_id;
+ unsigned long flags;
status = i2c_readl(i2c_dev, I2C_INT_STATUS);
+ spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
if (status == 0) {
dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
@@ -517,12 +573,13 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
if (!i2c_dev->irq_disabled) {
disable_irq_nosync(i2c_dev->irq);
- i2c_dev->irq_disabled = 1;
+ i2c_dev->irq_disabled = true;
}
goto err;
}
if (unlikely(status & status_err)) {
+ tegra_i2c_disable_packet_mode(i2c_dev);
if (status & I2C_INT_NO_ACK)
i2c_dev->msg_err |= I2C_ERR_NO_ACK;
if (status & I2C_INT_ARBITRATION_LOST)
@@ -552,7 +609,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
BUG_ON(i2c_dev->msg_buf_remaining);
complete(&i2c_dev->msg_complete);
}
- return IRQ_HANDLED;
+ goto done;
err:
/* An error occurred, mask all interrupts */
tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST |
@@ -563,6 +620,8 @@ err:
dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
complete(&i2c_dev->msg_complete);
+done:
+ spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
return IRQ_HANDLED;
}
@@ -572,6 +631,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
u32 packet_header;
u32 int_mask;
unsigned long time_left;
+ unsigned long flags;
tegra_i2c_flush_fifos(i2c_dev);
@@ -584,6 +644,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_dev->msg_read = (msg->flags & I2C_M_RD);
reinit_completion(&i2c_dev->msg_complete);
+ spin_lock_irqsave(&i2c_dev->xfer_lock, flags);
+
+ int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
+ tegra_i2c_unmask_irq(i2c_dev, int_mask);
+
packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) |
PACKET_HEADER0_PROTOCOL_I2C |
(i2c_dev->cont_id << PACKET_HEADER0_CONT_ID_SHIFT) |
@@ -613,14 +678,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
if (!(msg->flags & I2C_M_RD))
tegra_i2c_fill_tx_fifo(i2c_dev);
- int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
if (i2c_dev->hw->has_per_pkt_xfer_complete_irq)
int_mask |= I2C_INT_PACKET_XFER_COMPLETE;
if (msg->flags & I2C_M_RD)
int_mask |= I2C_INT_RX_FIFO_DATA_REQ;
else if (i2c_dev->msg_buf_remaining)
int_mask |= I2C_INT_TX_FIFO_DATA_REQ;
+
tegra_i2c_unmask_irq(i2c_dev, int_mask);
+ spin_unlock_irqrestore(&i2c_dev->xfer_lock, flags);
dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
i2c_readl(i2c_dev, I2C_INT_MASK));
@@ -643,9 +709,10 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
return 0;
/*
- * NACK interrupt is generated before the I2C controller generates the
- * STOP condition on the bus. So wait for 2 clock periods before resetting
- * the controller so that STOP condition has been delivered properly.
+ * NACK interrupt is generated before the I2C controller generates
+ * the STOP condition on the bus. So wait for 2 clock periods
+ * before resetting the controller so that the STOP condition has
+ * been delivered properly.
*/
if (i2c_dev->msg_err == I2C_ERR_NO_ACK)
udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
@@ -670,14 +737,15 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
if (i2c_dev->is_suspended)
return -EBUSY;
- ret = tegra_i2c_clock_enable(i2c_dev);
+ ret = pm_runtime_get_sync(i2c_dev->dev);
if (ret < 0) {
- dev_err(i2c_dev->dev, "Clock enable failed %d\n", ret);
+ dev_err(i2c_dev->dev, "runtime resume failed %d\n", ret);
return ret;
}
for (i = 0; i < num; i++) {
enum msg_end_type end_type = MSG_END_STOP;
+
if (i < (num - 1)) {
if (msgs[i + 1].flags & I2C_M_NOSTART)
end_type = MSG_END_CONTINUE;
@@ -688,7 +756,9 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
if (ret)
break;
}
- tegra_i2c_clock_disable(i2c_dev);
+
+ pm_runtime_put(i2c_dev->dev);
+
return ret ?: i;
}
@@ -825,7 +895,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
div_clk = devm_clk_get(&pdev->dev, "div-clk");
if (IS_ERR(div_clk)) {
- dev_err(&pdev->dev, "missing controller clock");
+ dev_err(&pdev->dev, "missing controller clock\n");
return PTR_ERR(div_clk);
}
@@ -843,27 +913,22 @@ static int tegra_i2c_probe(struct platform_device *pdev)
i2c_dev->rst = devm_reset_control_get(&pdev->dev, "i2c");
if (IS_ERR(i2c_dev->rst)) {
- dev_err(&pdev->dev, "missing controller reset");
+ dev_err(&pdev->dev, "missing controller reset\n");
return PTR_ERR(i2c_dev->rst);
}
tegra_i2c_parse_dt(i2c_dev);
- i2c_dev->hw = &tegra20_i2c_hw;
-
- if (pdev->dev.of_node) {
- i2c_dev->hw = of_device_get_match_data(&pdev->dev);
- i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
- "nvidia,tegra20-i2c-dvc");
- } else if (pdev->id == 3) {
- i2c_dev->is_dvc = 1;
- }
+ i2c_dev->hw = of_device_get_match_data(&pdev->dev);
+ i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
+ "nvidia,tegra20-i2c-dvc");
init_completion(&i2c_dev->msg_complete);
+ spin_lock_init(&i2c_dev->xfer_lock);
if (!i2c_dev->hw->has_single_clk_source) {
fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
if (IS_ERR(fast_clk)) {
- dev_err(&pdev->dev, "missing fast clock");
+ dev_err(&pdev->dev, "missing fast clock\n");
return PTR_ERR(fast_clk);
}
i2c_dev->fast_clk = fast_clk;
@@ -900,18 +965,27 @@ static int tegra_i2c_probe(struct platform_device *pdev)
goto unprepare_fast_clk;
}
+ pm_runtime_enable(&pdev->dev);
+ if (!pm_runtime_enabled(&pdev->dev)) {
+ ret = tegra_i2c_runtime_resume(&pdev->dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "runtime resume failed\n");
+ goto unprepare_div_clk;
+ }
+ }
+
if (i2c_dev->is_multimaster_mode) {
ret = clk_enable(i2c_dev->div_clk);
if (ret < 0) {
dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
ret);
- goto unprepare_div_clk;
+ goto disable_rpm;
}
}
ret = tegra_i2c_init(i2c_dev);
if (ret) {
- dev_err(&pdev->dev, "Failed to initialize i2c controller");
+ dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
goto disable_div_clk;
}
@@ -925,17 +999,15 @@ static int tegra_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
i2c_dev->adapter.owner = THIS_MODULE;
i2c_dev->adapter.class = I2C_CLASS_DEPRECATED;
- strlcpy(i2c_dev->adapter.name, "Tegra I2C adapter",
+ strlcpy(i2c_dev->adapter.name, dev_name(&pdev->dev),
sizeof(i2c_dev->adapter.name));
i2c_dev->adapter.dev.parent = &pdev->dev;
i2c_dev->adapter.nr = pdev->id;
i2c_dev->adapter.dev.of_node = pdev->dev.of_node;
ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
- if (ret) {
- dev_err(&pdev->dev, "Failed to add I2C adapter\n");
+ if (ret)
goto disable_div_clk;
- }
return 0;
@@ -943,6 +1015,11 @@ disable_div_clk:
if (i2c_dev->is_multimaster_mode)
clk_disable(i2c_dev->div_clk);
+disable_rpm:
+ pm_runtime_disable(&pdev->dev);
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ tegra_i2c_runtime_suspend(&pdev->dev);
+
unprepare_div_clk:
clk_unprepare(i2c_dev->div_clk);
@@ -956,11 +1033,16 @@ unprepare_fast_clk:
static int tegra_i2c_remove(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
i2c_del_adapter(&i2c_dev->adapter);
if (i2c_dev->is_multimaster_mode)
clk_disable(i2c_dev->div_clk);
+ pm_runtime_disable(&pdev->dev);
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ tegra_i2c_runtime_suspend(&pdev->dev);
+
clk_unprepare(i2c_dev->div_clk);
if (!i2c_dev->hw->has_single_clk_source)
clk_unprepare(i2c_dev->fast_clk);
@@ -988,20 +1070,19 @@ static int tegra_i2c_resume(struct device *dev)
i2c_lock_adapter(&i2c_dev->adapter);
ret = tegra_i2c_init(i2c_dev);
-
- if (ret) {
- i2c_unlock_adapter(&i2c_dev->adapter);
- return ret;
- }
-
- i2c_dev->is_suspended = false;
+ if (!ret)
+ i2c_dev->is_suspended = false;
i2c_unlock_adapter(&i2c_dev->adapter);
- return 0;
+ return ret;
}
-static SIMPLE_DEV_PM_OPS(tegra_i2c_pm, tegra_i2c_suspend, tegra_i2c_resume);
+static const struct dev_pm_ops tegra_i2c_pm = {
+ SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
+};
#define TEGRA_I2C_PM (&tegra_i2c_pm)
#else
#define TEGRA_I2C_PM NULL
diff --git a/drivers/i2c/busses/i2c-thunderx-pcidrv.c b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
new file mode 100644
index 000000000000..bba5b429f69c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-thunderx-pcidrv.c
@@ -0,0 +1,259 @@
+/*
+ * Cavium ThunderX i2c driver.
+ *
+ * Copyright (C) 2015,2016 Cavium Inc.
+ * Authors: Fred Martin <fmartin@caviumnetworks.com>
+ * Jan Glauber <jglauber@cavium.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+
+#include "i2c-octeon-core.h"
+
+#define DRV_NAME "i2c-thunderx"
+
+#define PCI_DEVICE_ID_THUNDER_TWSI 0xa012
+
+#define SYS_FREQ_DEFAULT 700000000
+
+#define TWSI_INT_ENA_W1C 0x1028
+#define TWSI_INT_ENA_W1S 0x1030
+
+/*
+ * Enable the CORE interrupt.
+ * The interrupt will be asserted when there is non-STAT_IDLE state in the
+ * SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void thunder_i2c_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+ i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+/*
+ * Disable the CORE interrupt.
+ */
+static void thunder_i2c_int_disable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_writeq_flush(TWSI_INT_CORE_INT,
+ i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static void thunder_i2c_hlc_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+ i2c->twsi_base + TWSI_INT_ENA_W1S);
+}
+
+static void thunder_i2c_hlc_int_disable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_writeq_flush(TWSI_INT_ST_INT | TWSI_INT_TS_INT,
+ i2c->twsi_base + TWSI_INT_ENA_W1C);
+}
+
+static u32 thunderx_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_SMBUS_BLOCK_PROC_CALL;
+}
+
+static const struct i2c_algorithm thunderx_i2c_algo = {
+ .master_xfer = octeon_i2c_xfer,
+ .functionality = thunderx_i2c_functionality,
+};
+
+static struct i2c_adapter thunderx_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "ThunderX adapter",
+ .algo = &thunderx_i2c_algo,
+};
+
+static void thunder_i2c_clock_enable(struct device *dev, struct octeon_i2c *i2c)
+{
+ int ret;
+
+ i2c->clk = clk_get(dev, NULL);
+ if (IS_ERR(i2c->clk)) {
+ i2c->clk = NULL;
+ goto skip;
+ }
+
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret)
+ goto skip;
+ i2c->sys_freq = clk_get_rate(i2c->clk);
+
+skip:
+ if (!i2c->sys_freq)
+ i2c->sys_freq = SYS_FREQ_DEFAULT;
+}
+
+static void thunder_i2c_clock_disable(struct device *dev, struct clk *clk)
+{
+ if (!clk)
+ return;
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+}
+
+static int thunder_i2c_smbus_setup_of(struct octeon_i2c *i2c,
+ struct device_node *node)
+{
+ u32 type;
+
+ if (!node)
+ return -EINVAL;
+
+ i2c->alert_data.irq = irq_of_parse_and_map(node, 0);
+ if (!i2c->alert_data.irq)
+ return -EINVAL;
+
+ type = irqd_get_trigger_type(irq_get_irq_data(i2c->alert_data.irq));
+ i2c->alert_data.alert_edge_triggered =
+ (type & IRQ_TYPE_LEVEL_MASK) ? 1 : 0;
+
+ i2c->ara = i2c_setup_smbus_alert(&i2c->adap, &i2c->alert_data);
+ if (!i2c->ara)
+ return -ENODEV;
+ return 0;
+}
+
+static int thunder_i2c_smbus_setup(struct octeon_i2c *i2c,
+ struct device_node *node)
+{
+ /* TODO: ACPI support */
+ if (!acpi_disabled)
+ return -EOPNOTSUPP;
+
+ return thunder_i2c_smbus_setup_of(i2c, node);
+}
+
+static void thunder_i2c_smbus_remove(struct octeon_i2c *i2c)
+{
+ if (i2c->ara)
+ i2c_unregister_device(i2c->ara);
+}
+
+static int thunder_i2c_probe_pci(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct device *dev = &pdev->dev;
+ struct octeon_i2c *i2c;
+ int ret;
+
+ i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ i2c->roff.sw_twsi = 0x1000;
+ i2c->roff.twsi_int = 0x1010;
+ i2c->roff.sw_twsi_ext = 0x1018;
+
+ i2c->dev = dev;
+ pci_set_drvdata(pdev, i2c);
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ ret = pci_request_regions(pdev, DRV_NAME);
+ if (ret)
+ return ret;
+
+ i2c->twsi_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!i2c->twsi_base)
+ return -EINVAL;
+
+ thunder_i2c_clock_enable(dev, i2c);
+ ret = device_property_read_u32(dev, "clock-frequency", &i2c->twsi_freq);
+ if (ret)
+ i2c->twsi_freq = 100000;
+
+ init_waitqueue_head(&i2c->queue);
+
+ i2c->int_enable = thunder_i2c_int_enable;
+ i2c->int_disable = thunder_i2c_int_disable;
+ i2c->hlc_int_enable = thunder_i2c_hlc_int_enable;
+ i2c->hlc_int_disable = thunder_i2c_hlc_int_disable;
+
+ ret = pci_enable_msix(pdev, &i2c->i2c_msix, 1);
+ if (ret)
+ goto error;
+
+ ret = devm_request_irq(dev, i2c->i2c_msix.vector, octeon_i2c_isr, 0,
+ DRV_NAME, i2c);
+ if (ret)
+ goto error;
+
+ ret = octeon_i2c_init_lowlevel(i2c);
+ if (ret)
+ goto error;
+
+ octeon_i2c_set_clock(i2c);
+
+ i2c->adap = thunderx_i2c_ops;
+ i2c->adap.retries = 5;
+ i2c->adap.bus_recovery_info = &octeon_i2c_recovery_info;
+ i2c->adap.dev.parent = dev;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+ "Cavium ThunderX i2c adapter at %s", dev_name(dev));
+ i2c_set_adapdata(&i2c->adap, i2c);
+
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret)
+ goto error;
+
+ dev_info(i2c->dev, "Probed. Set system clock to %u\n", i2c->sys_freq);
+
+ ret = thunder_i2c_smbus_setup(i2c, pdev->dev.of_node);
+ if (ret)
+ dev_info(dev, "SMBUS alert not active on this bus\n");
+
+ return 0;
+
+error:
+ thunder_i2c_clock_disable(dev, i2c->clk);
+ return ret;
+}
+
+static void thunder_i2c_remove_pci(struct pci_dev *pdev)
+{
+ struct octeon_i2c *i2c = pci_get_drvdata(pdev);
+
+ thunder_i2c_smbus_remove(i2c);
+ thunder_i2c_clock_disable(&pdev->dev, i2c->clk);
+ i2c_del_adapter(&i2c->adap);
+}
+
+static const struct pci_device_id thunder_i2c_pci_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_TWSI) },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, thunder_i2c_pci_id_table);
+
+static struct pci_driver thunder_i2c_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = thunder_i2c_pci_id_table,
+ .probe = thunder_i2c_probe_pci,
+ .remove = thunder_i2c_remove_pci,
+};
+
+module_pci_driver(thunder_i2c_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fred Martin <fmartin@caviumnetworks.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium ThunderX SOC");
diff --git a/drivers/i2c/busses/i2c-uniphier-f.c b/drivers/i2c/busses/i2c-uniphier-f.c
index aeead0d27d10..db9105e52c79 100644
--- a/drivers/i2c/busses/i2c-uniphier-f.c
+++ b/drivers/i2c/busses/i2c-uniphier-f.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/i2c.h>
+#include <linux/iopoll.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -348,14 +349,19 @@ static int uniphier_fi2c_master_xfer_one(struct i2c_adapter *adap,
dev_dbg(&adap->dev, "complete\n");
if (unlikely(priv->flags & UNIPHIER_FI2C_DEFER_STOP_COMP)) {
- u32 status = readl(priv->membase + UNIPHIER_FI2C_SR);
-
- if (!(status & UNIPHIER_FI2C_SR_STS) ||
- status & UNIPHIER_FI2C_SR_BB) {
+ u32 status;
+ int ret;
+
+ ret = readl_poll_timeout(priv->membase + UNIPHIER_FI2C_SR,
+ status,
+ (status & UNIPHIER_FI2C_SR_STS) &&
+ !(status & UNIPHIER_FI2C_SR_BB),
+ 1, 20);
+ if (ret) {
dev_err(&adap->dev,
"stop condition was not completed.\n");
uniphier_fi2c_recover(priv);
- return -EBUSY;
+ return ret;
}
}
@@ -455,54 +461,25 @@ static struct i2c_bus_recovery_info uniphier_fi2c_bus_recovery_info = {
.unprepare_recovery = uniphier_fi2c_unprepare_recovery,
};
-static int uniphier_fi2c_clk_init(struct device *dev,
- struct uniphier_fi2c_priv *priv)
+static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv,
+ u32 bus_speed, unsigned long clk_rate)
{
- struct device_node *np = dev->of_node;
- unsigned long clk_rate;
- u32 bus_speed, clk_count;
- int ret;
-
- if (of_property_read_u32(np, "clock-frequency", &bus_speed))
- bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED;
-
- if (!bus_speed) {
- dev_err(dev, "clock-frequency should not be zero\n");
- return -EINVAL;
- }
-
- if (bus_speed > UNIPHIER_FI2C_MAX_SPEED)
- bus_speed = UNIPHIER_FI2C_MAX_SPEED;
-
- /* Get input clk rate through clk driver */
- priv->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(priv->clk)) {
- dev_err(dev, "failed to get clock\n");
- return PTR_ERR(priv->clk);
- }
+ u32 tmp;
- ret = clk_prepare_enable(priv->clk);
- if (ret)
- return ret;
-
- clk_rate = clk_get_rate(priv->clk);
- if (!clk_rate) {
- dev_err(dev, "input clock rate should not be zero\n");
- return -EINVAL;
- }
+ tmp = readl(priv->membase + UNIPHIER_FI2C_CR);
+ tmp |= UNIPHIER_FI2C_CR_MST;
+ writel(tmp, priv->membase + UNIPHIER_FI2C_CR);
uniphier_fi2c_reset(priv);
- clk_count = clk_rate / bus_speed;
+ tmp = clk_rate / bus_speed;
- writel(clk_count, priv->membase + UNIPHIER_FI2C_CYC);
- writel(clk_count / 2, priv->membase + UNIPHIER_FI2C_LCTL);
- writel(clk_count / 2, priv->membase + UNIPHIER_FI2C_SSUT);
- writel(clk_count / 16, priv->membase + UNIPHIER_FI2C_DSUT);
+ writel(tmp, priv->membase + UNIPHIER_FI2C_CYC);
+ writel(tmp / 2, priv->membase + UNIPHIER_FI2C_LCTL);
+ writel(tmp / 2, priv->membase + UNIPHIER_FI2C_SSUT);
+ writel(tmp / 16, priv->membase + UNIPHIER_FI2C_DSUT);
uniphier_fi2c_prepare_operation(priv);
-
- return 0;
}
static int uniphier_fi2c_probe(struct platform_device *pdev)
@@ -510,8 +487,9 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct uniphier_fi2c_priv *priv;
struct resource *regs;
- int irq;
- int ret;
+ u32 bus_speed;
+ unsigned long clk_rate;
+ int irq, ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -528,6 +506,31 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
return irq;
}
+ if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
+ bus_speed = UNIPHIER_FI2C_DEFAULT_SPEED;
+
+ if (!bus_speed || bus_speed > UNIPHIER_FI2C_MAX_SPEED) {
+ dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
+ return -EINVAL;
+ }
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "failed to get clock\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ clk_rate = clk_get_rate(priv->clk);
+ if (!clk_rate) {
+ dev_err(dev, "input clock rate should not be zero\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
init_completion(&priv->comp);
priv->adap.owner = THIS_MODULE;
priv->adap.algo = &uniphier_fi2c_algo;
@@ -538,9 +541,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&priv->adap, priv);
platform_set_drvdata(pdev, priv);
- ret = uniphier_fi2c_clk_init(dev, priv);
- if (ret)
- goto err;
+ uniphier_fi2c_hw_init(priv, bus_speed, clk_rate);
ret = devm_request_irq(dev, irq, uniphier_fi2c_interrupt, 0,
pdev->name, priv);
@@ -550,11 +551,6 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
}
ret = i2c_add_adapter(&priv->adap);
- if (ret) {
- dev_err(dev, "failed to add I2C adapter\n");
- goto err;
- }
-
err:
if (ret)
clk_disable_unprepare(priv->clk);
diff --git a/drivers/i2c/busses/i2c-uniphier.c b/drivers/i2c/busses/i2c-uniphier.c
index 475a5eb514e2..56e92af46ddc 100644
--- a/drivers/i2c/busses/i2c-uniphier.c
+++ b/drivers/i2c/busses/i2c-uniphier.c
@@ -316,50 +316,15 @@ static struct i2c_bus_recovery_info uniphier_i2c_bus_recovery_info = {
.unprepare_recovery = uniphier_i2c_unprepare_recovery,
};
-static int uniphier_i2c_clk_init(struct device *dev,
- struct uniphier_i2c_priv *priv)
+static void uniphier_i2c_hw_init(struct uniphier_i2c_priv *priv,
+ u32 bus_speed, unsigned long clk_rate)
{
- struct device_node *np = dev->of_node;
- unsigned long clk_rate;
- u32 bus_speed;
- int ret;
-
- if (of_property_read_u32(np, "clock-frequency", &bus_speed))
- bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
-
- if (!bus_speed) {
- dev_err(dev, "clock-frequency should not be zero\n");
- return -EINVAL;
- }
-
- if (bus_speed > UNIPHIER_I2C_MAX_SPEED)
- bus_speed = UNIPHIER_I2C_MAX_SPEED;
-
- /* Get input clk rate through clk driver */
- priv->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(priv->clk)) {
- dev_err(dev, "failed to get clock\n");
- return PTR_ERR(priv->clk);
- }
-
- ret = clk_prepare_enable(priv->clk);
- if (ret)
- return ret;
-
- clk_rate = clk_get_rate(priv->clk);
- if (!clk_rate) {
- dev_err(dev, "input clock rate should not be zero\n");
- return -EINVAL;
- }
-
uniphier_i2c_reset(priv, true);
writel((clk_rate / bus_speed / 2 << 16) | (clk_rate / bus_speed),
priv->membase + UNIPHIER_I2C_CLK);
uniphier_i2c_reset(priv, false);
-
- return 0;
}
static int uniphier_i2c_probe(struct platform_device *pdev)
@@ -367,8 +332,9 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct uniphier_i2c_priv *priv;
struct resource *regs;
- int irq;
- int ret;
+ u32 bus_speed;
+ unsigned long clk_rate;
+ int irq, ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -385,6 +351,31 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
return irq;
}
+ if (of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed))
+ bus_speed = UNIPHIER_I2C_DEFAULT_SPEED;
+
+ if (!bus_speed || bus_speed > UNIPHIER_I2C_MAX_SPEED) {
+ dev_err(dev, "invalid clock-frequency %d\n", bus_speed);
+ return -EINVAL;
+ }
+
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "failed to get clock\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ clk_rate = clk_get_rate(priv->clk);
+ if (!clk_rate) {
+ dev_err(dev, "input clock rate should not be zero\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
init_completion(&priv->comp);
priv->adap.owner = THIS_MODULE;
priv->adap.algo = &uniphier_i2c_algo;
@@ -395,9 +386,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&priv->adap, priv);
platform_set_drvdata(pdev, priv);
- ret = uniphier_i2c_clk_init(dev, priv);
- if (ret)
- goto err;
+ uniphier_i2c_hw_init(priv, bus_speed, clk_rate);
ret = devm_request_irq(dev, irq, uniphier_i2c_interrupt, 0, pdev->name,
priv);
@@ -407,11 +396,6 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
}
ret = i2c_add_adapter(&priv->adap);
- if (ret) {
- dev_err(dev, "failed to add I2C adapter\n");
- goto err;
- }
-
err:
if (ret)
clk_disable_unprepare(priv->clk);
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
index e1e3a85596c5..fbd0fd59f312 100644
--- a/drivers/i2c/busses/i2c-wmt.c
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -432,10 +432,8 @@ static int wmt_i2c_probe(struct platform_device *pdev)
}
err = i2c_add_adapter(adap);
- if (err) {
- dev_err(&pdev->dev, "failed to add adapter\n");
+ if (err)
return err;
- }
platform_set_drvdata(pdev, i2c_dev);
diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 4233f5695352..263685c7a512 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -418,7 +418,6 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(adapter, ctx);
rc = i2c_add_adapter(adapter);
if (rc) {
- dev_err(&pdev->dev, "Adapter registeration failed\n");
mbox_free_channel(ctx->mbox_chan);
return rc;
}
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 74f54f2f471f..66bce3b311a1 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -804,7 +804,6 @@ static int xiic_i2c_probe(struct platform_device *pdev)
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
if (ret) {
- dev_err(&pdev->dev, "Failed to add adapter\n");
xiic_deinit(i2c);
goto err_clk_dis;
}
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 55a7bef1b2e1..2a972ed7aa0d 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -400,10 +400,8 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&priv->adapter, priv);
err = i2c_add_adapter(&priv->adapter);
- if (err) {
- dev_err(&pdev->dev, "failed to add I2C adapter!\n");
+ if (err)
return err;
- }
platform_set_drvdata(pdev, priv);
dev_dbg(&pdev->dev, "I2C bus:%d added\n", priv->adapter.nr);
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 613c3a4f2c51..0968f59b6df5 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -432,10 +432,8 @@ static int xlr_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(&priv->adap, priv);
ret = i2c_add_numbered_adapter(&priv->adap);
- if (ret < 0) {
- dev_err(&priv->adap.dev, "Failed to add i2c bus.\n");
+ if (ret < 0)
return ret;
- }
platform_set_drvdata(pdev, priv);
dev_info(&priv->adap.dev, "Added I2C Bus.\n");
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index da3a02ef4a31..98fffa3a09f7 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -88,7 +88,7 @@ void i2c_transfer_trace_unreg(void)
}
#if defined(CONFIG_ACPI)
-struct acpi_i2c_handler_data {
+struct i2c_acpi_handler_data {
struct acpi_connection_info info;
struct i2c_adapter *adapter;
};
@@ -103,15 +103,18 @@ struct gsb_buffer {
};
} __packed;
-struct acpi_i2c_lookup {
+struct i2c_acpi_lookup {
struct i2c_board_info *info;
acpi_handle adapter_handle;
acpi_handle device_handle;
+ acpi_handle search_handle;
+ u32 speed;
+ u32 min_speed;
};
-static int acpi_i2c_fill_info(struct acpi_resource *ares, void *data)
+static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
{
- struct acpi_i2c_lookup *lookup = data;
+ struct i2c_acpi_lookup *lookup = data;
struct i2c_board_info *info = lookup->info;
struct acpi_resource_i2c_serialbus *sb;
acpi_status status;
@@ -130,19 +133,18 @@ static int acpi_i2c_fill_info(struct acpi_resource *ares, void *data)
return 1;
info->addr = sb->slave_address;
+ lookup->speed = sb->connection_speed;
if (sb->access_mode == ACPI_I2C_10BIT_MODE)
info->flags |= I2C_CLIENT_TEN;
return 1;
}
-static int acpi_i2c_get_info(struct acpi_device *adev,
- struct i2c_board_info *info,
- acpi_handle *adapter_handle)
+static int i2c_acpi_do_lookup(struct acpi_device *adev,
+ struct i2c_acpi_lookup *lookup)
{
+ struct i2c_board_info *info = lookup->info;
struct list_head resource_list;
- struct resource_entry *entry;
- struct acpi_i2c_lookup lookup;
int ret;
if (acpi_bus_get_status(adev) || !adev->status.present ||
@@ -150,24 +152,58 @@ static int acpi_i2c_get_info(struct acpi_device *adev,
return -EINVAL;
memset(info, 0, sizeof(*info));
- info->fwnode = acpi_fwnode_handle(adev);
-
- memset(&lookup, 0, sizeof(lookup));
- lookup.device_handle = acpi_device_handle(adev);
- lookup.info = info;
+ lookup->device_handle = acpi_device_handle(adev);
/* Look up for I2cSerialBus resource */
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list,
- acpi_i2c_fill_info, &lookup);
+ i2c_acpi_fill_info, lookup);
acpi_dev_free_resource_list(&resource_list);
if (ret < 0 || !info->addr)
return -EINVAL;
- *adapter_handle = lookup.adapter_handle;
+ return 0;
+}
+
+static int i2c_acpi_get_info(struct acpi_device *adev,
+ struct i2c_board_info *info,
+ struct i2c_adapter *adapter,
+ acpi_handle *adapter_handle)
+{
+ struct list_head resource_list;
+ struct resource_entry *entry;
+ struct i2c_acpi_lookup lookup;
+ int ret;
+
+ memset(&lookup, 0, sizeof(lookup));
+ lookup.info = info;
+
+ ret = i2c_acpi_do_lookup(adev, &lookup);
+ if (ret)
+ return ret;
+
+ if (adapter) {
+ /* The adapter must match the one in I2cSerialBus() connector */
+ if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
+ return -ENODEV;
+ } else {
+ struct acpi_device *adapter_adev;
+
+ /* The adapter must be present */
+ if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
+ return -ENODEV;
+ if (acpi_bus_get_status(adapter_adev) ||
+ !adapter_adev->status.present)
+ return -ENODEV;
+ }
+
+ info->fwnode = acpi_fwnode_handle(adev);
+ if (adapter_handle)
+ *adapter_handle = lookup.adapter_handle;
/* Then fill IRQ number if any */
+ INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
if (ret < 0)
return -EINVAL;
@@ -186,7 +222,7 @@ static int acpi_i2c_get_info(struct acpi_device *adev,
return 0;
}
-static void acpi_i2c_register_device(struct i2c_adapter *adapter,
+static void i2c_acpi_register_device(struct i2c_adapter *adapter,
struct acpi_device *adev,
struct i2c_board_info *info)
{
@@ -201,39 +237,35 @@ static void acpi_i2c_register_device(struct i2c_adapter *adapter,
}
}
-static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
void *data, void **return_value)
{
struct i2c_adapter *adapter = data;
struct acpi_device *adev;
- acpi_handle adapter_handle;
struct i2c_board_info info;
if (acpi_bus_get_device(handle, &adev))
return AE_OK;
- if (acpi_i2c_get_info(adev, &info, &adapter_handle))
+ if (i2c_acpi_get_info(adev, &info, adapter, NULL))
return AE_OK;
- if (adapter_handle != ACPI_HANDLE(&adapter->dev))
- return AE_OK;
-
- acpi_i2c_register_device(adapter, adev, &info);
+ i2c_acpi_register_device(adapter, adev, &info);
return AE_OK;
}
-#define ACPI_I2C_MAX_SCAN_DEPTH 32
+#define I2C_ACPI_MAX_SCAN_DEPTH 32
/**
- * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
* @adap: pointer to adapter
*
* Enumerate all I2C slave devices behind this adapter by walking the ACPI
* namespace. When a device is found it will be added to the Linux device
* model and bound to the corresponding ACPI handle.
*/
-static void acpi_i2c_register_devices(struct i2c_adapter *adap)
+static void i2c_acpi_register_devices(struct i2c_adapter *adap)
{
acpi_status status;
@@ -241,14 +273,72 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap)
return;
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_I2C_MAX_SCAN_DEPTH,
- acpi_i2c_add_device, NULL,
+ I2C_ACPI_MAX_SCAN_DEPTH,
+ i2c_acpi_add_device, NULL,
adap, NULL);
if (ACPI_FAILURE(status))
dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
}
-static int acpi_i2c_match_adapter(struct device *dev, void *data)
+static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_acpi_lookup *lookup = data;
+ struct acpi_device *adev;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+
+ if (i2c_acpi_do_lookup(adev, lookup))
+ return AE_OK;
+
+ if (lookup->search_handle != lookup->adapter_handle)
+ return AE_OK;
+
+ if (lookup->speed <= lookup->min_speed)
+ lookup->min_speed = lookup->speed;
+
+ return AE_OK;
+}
+
+/**
+ * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
+ * @dev: The device owning the bus
+ *
+ * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
+ * devices connected to this bus and use the speed of slowest device.
+ *
+ * Returns the speed in Hz or zero
+ */
+u32 i2c_acpi_find_bus_speed(struct device *dev)
+{
+ struct i2c_acpi_lookup lookup;
+ struct i2c_board_info dummy;
+ acpi_status status;
+
+ if (!has_acpi_companion(dev))
+ return 0;
+
+ memset(&lookup, 0, sizeof(lookup));
+ lookup.search_handle = ACPI_HANDLE(dev);
+ lookup.min_speed = UINT_MAX;
+ lookup.info = &dummy;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ I2C_ACPI_MAX_SCAN_DEPTH,
+ i2c_acpi_lookup_speed, NULL,
+ &lookup, NULL);
+
+ if (ACPI_FAILURE(status)) {
+ dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
+ return 0;
+ }
+
+ return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0;
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
+
+static int i2c_acpi_match_adapter(struct device *dev, void *data)
{
struct i2c_adapter *adapter = i2c_verify_adapter(dev);
@@ -258,29 +348,29 @@ static int acpi_i2c_match_adapter(struct device *dev, void *data)
return ACPI_HANDLE(dev) == (acpi_handle)data;
}
-static int acpi_i2c_match_device(struct device *dev, void *data)
+static int i2c_acpi_match_device(struct device *dev, void *data)
{
return ACPI_COMPANION(dev) == data;
}
-static struct i2c_adapter *acpi_i2c_find_adapter_by_handle(acpi_handle handle)
+static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
{
struct device *dev;
dev = bus_find_device(&i2c_bus_type, NULL, handle,
- acpi_i2c_match_adapter);
+ i2c_acpi_match_adapter);
return dev ? i2c_verify_adapter(dev) : NULL;
}
-static struct i2c_client *acpi_i2c_find_client_by_adev(struct acpi_device *adev)
+static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
{
struct device *dev;
- dev = bus_find_device(&i2c_bus_type, NULL, adev, acpi_i2c_match_device);
+ dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device);
return dev ? i2c_verify_client(dev) : NULL;
}
-static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value,
+static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
void *arg)
{
struct acpi_device *adev = arg;
@@ -291,20 +381,20 @@ static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value,
switch (value) {
case ACPI_RECONFIG_DEVICE_ADD:
- if (acpi_i2c_get_info(adev, &info, &adapter_handle))
+ if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
break;
- adapter = acpi_i2c_find_adapter_by_handle(adapter_handle);
+ adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
if (!adapter)
break;
- acpi_i2c_register_device(adapter, adev, &info);
+ i2c_acpi_register_device(adapter, adev, &info);
break;
case ACPI_RECONFIG_DEVICE_REMOVE:
if (!acpi_device_enumerated(adev))
break;
- client = acpi_i2c_find_client_by_adev(adev);
+ client = i2c_acpi_find_client_by_adev(adev);
if (!client)
break;
@@ -317,10 +407,10 @@ static int acpi_i2c_notify(struct notifier_block *nb, unsigned long value,
}
static struct notifier_block i2c_acpi_notifier = {
- .notifier_call = acpi_i2c_notify,
+ .notifier_call = i2c_acpi_notify,
};
#else /* CONFIG_ACPI */
-static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) { }
+static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
extern struct notifier_block i2c_acpi_notifier;
#endif /* CONFIG_ACPI */
@@ -386,12 +476,12 @@ static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
}
static acpi_status
-acpi_i2c_space_handler(u32 function, acpi_physical_address command,
+i2c_acpi_space_handler(u32 function, acpi_physical_address command,
u32 bits, u64 *value64,
void *handler_context, void *region_context)
{
struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
- struct acpi_i2c_handler_data *data = handler_context;
+ struct i2c_acpi_handler_data *data = handler_context;
struct acpi_connection_info *info = &data->info;
struct acpi_resource_i2c_serialbus *sb;
struct i2c_adapter *adapter = data->adapter;
@@ -510,10 +600,10 @@ acpi_i2c_space_handler(u32 function, acpi_physical_address command,
}
-static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
+static int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
{
acpi_handle handle;
- struct acpi_i2c_handler_data *data;
+ struct i2c_acpi_handler_data *data;
acpi_status status;
if (!adapter->dev.parent)
@@ -524,7 +614,7 @@ static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
if (!handle)
return -ENODEV;
- data = kzalloc(sizeof(struct acpi_i2c_handler_data),
+ data = kzalloc(sizeof(struct i2c_acpi_handler_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -538,7 +628,7 @@ static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
status = acpi_install_address_space_handler(handle,
ACPI_ADR_SPACE_GSBUS,
- &acpi_i2c_space_handler,
+ &i2c_acpi_space_handler,
NULL,
data);
if (ACPI_FAILURE(status)) {
@@ -552,10 +642,10 @@ static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
return 0;
}
-static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
+static void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
{
acpi_handle handle;
- struct acpi_i2c_handler_data *data;
+ struct i2c_acpi_handler_data *data;
acpi_status status;
if (!adapter->dev.parent)
@@ -568,7 +658,7 @@ static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
acpi_remove_address_space_handler(handle,
ACPI_ADR_SPACE_GSBUS,
- &acpi_i2c_space_handler);
+ &i2c_acpi_space_handler);
status = acpi_bus_get_private_data(handle, (void **)&data);
if (ACPI_SUCCESS(status))
@@ -577,10 +667,10 @@ static void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
acpi_bus_detach_private_data(handle);
}
#else /* CONFIG_ACPI_I2C_OPREGION */
-static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
+static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
{ }
-static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
+static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
{ return 0; }
#endif /* CONFIG_ACPI_I2C_OPREGION */
@@ -853,7 +943,7 @@ static int i2c_device_probe(struct device *dev)
status = 0;
if (status)
- dev_warn(&client->dev, "failed to set up wakeup irq");
+ dev_warn(&client->dev, "failed to set up wakeup irq\n");
}
dev_dbg(dev, "probe\n");
@@ -1208,8 +1298,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
return client;
out_err:
- dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x "
- "(%d)\n", client->name, client->addr, status);
+ dev_err(&adap->dev,
+ "Failed to register i2c client %s at 0x%02x (%d)\n",
+ client->name, client->addr, status);
out_err_silent:
kfree(client);
return NULL;
@@ -1335,21 +1426,19 @@ static void i2c_adapter_dev_release(struct device *dev)
complete(&adap->dev_released);
}
-/*
- * This function is only needed for mutex_lock_nested, so it is never
- * called unless locking correctness checking is enabled. Thus we
- * make it inline to avoid a compiler warning. That's what gcc ends up
- * doing anyway.
- */
-static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
+unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
{
unsigned int depth = 0;
while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
depth++;
+ WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
+ "adapter depth exceeds lockdep subclass limit\n");
+
return depth;
}
+EXPORT_SYMBOL_GPL(i2c_adapter_depth);
/*
* Let users instantiate I2C devices through sysfs. This can be used when
@@ -1678,8 +1767,8 @@ static int i2c_do_add_adapter(struct i2c_driver *driver,
if (driver->attach_adapter) {
dev_warn(&adap->dev, "%s: attach_adapter method is deprecated\n",
driver->driver.name);
- dev_warn(&adap->dev, "Please use another way to instantiate "
- "your i2c_client\n");
+ dev_warn(&adap->dev,
+ "Please use another way to instantiate your i2c_client\n");
/* We ignore the return code; if it fails, too bad */
driver->attach_adapter(adap);
}
@@ -1691,6 +1780,12 @@ static int __process_new_adapter(struct device_driver *d, void *data)
return i2c_do_add_adapter(to_i2c_driver(d), data);
}
+static const struct i2c_lock_operations i2c_adapter_lock_ops = {
+ .lock_bus = i2c_adapter_lock_bus,
+ .trylock_bus = i2c_adapter_trylock_bus,
+ .unlock_bus = i2c_adapter_unlock_bus,
+};
+
static int i2c_register_adapter(struct i2c_adapter *adap)
{
int res = -EINVAL;
@@ -1710,11 +1805,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
goto out_list;
}
- if (!adap->lock_bus) {
- adap->lock_bus = i2c_adapter_lock_bus;
- adap->trylock_bus = i2c_adapter_trylock_bus;
- adap->unlock_bus = i2c_adapter_unlock_bus;
- }
+ if (!adap->lock_ops)
+ adap->lock_ops = &i2c_adapter_lock_ops;
rt_mutex_init(&adap->bus_lock);
rt_mutex_init(&adap->mux_lock);
@@ -1752,8 +1844,8 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
/* create pre-declared device nodes */
of_i2c_register_devices(adap);
- acpi_i2c_register_devices(adap);
- acpi_i2c_install_space_handler(adap);
+ i2c_acpi_register_devices(adap);
+ i2c_acpi_install_space_handler(adap);
if (adap->nr < __i2c_first_dynamic_bus_num)
i2c_scan_static_board_info(adap);
@@ -1925,7 +2017,7 @@ void i2c_del_adapter(struct i2c_adapter *adap)
return;
}
- acpi_i2c_remove_space_handler(adap);
+ i2c_acpi_remove_space_handler(adap);
/* Tell drivers about this removal */
mutex_lock(&core_lock);
bus_for_each_drv(&i2c_bus_type, NULL, adap,
@@ -2451,15 +2543,16 @@ int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if (adap->algo->master_xfer) {
#ifdef DEBUG
for (ret = 0; ret < num; ret++) {
- dev_dbg(&adap->dev, "master_xfer[%d] %c, addr=0x%02x, "
- "len=%d%s\n", ret, (msgs[ret].flags & I2C_M_RD)
- ? 'R' : 'W', msgs[ret].addr, msgs[ret].len,
+ dev_dbg(&adap->dev,
+ "master_xfer[%d] %c, addr=0x%02x, len=%d%s\n",
+ ret, (msgs[ret].flags & I2C_M_RD) ? 'R' : 'W',
+ msgs[ret].addr, msgs[ret].len,
(msgs[ret].flags & I2C_M_RECV_LEN) ? "+" : "");
}
#endif
if (in_atomic() || irqs_disabled()) {
- ret = adap->trylock_bus(adap, I2C_LOCK_SEGMENT);
+ ret = i2c_trylock_bus(adap, I2C_LOCK_SEGMENT);
if (!ret)
/* I2C activity is ongoing. */
return -EAGAIN;
@@ -2619,9 +2712,9 @@ static int i2c_detect_address(struct i2c_client *temp_client,
/* Consistency check */
if (info.type[0] == '\0') {
- dev_err(&adapter->dev, "%s detection function provided "
- "no name for 0x%x\n", driver->driver.name,
- addr);
+ dev_err(&adapter->dev,
+ "%s detection function provided no name for 0x%x\n",
+ driver->driver.name, addr);
} else {
struct i2c_client *client;
@@ -2659,9 +2752,8 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
/* Warn that the adapter lost class based instantiation */
if (adapter->class == I2C_CLASS_DEPRECATED) {
dev_dbg(&adapter->dev,
- "This adapter dropped support for I2C classes and "
- "won't auto-detect %s devices anymore. If you need it, check "
- "'Documentation/i2c/instantiating-devices' for alternatives.\n",
+ "This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. "
+ "If you need it, check 'Documentation/i2c/instantiating-devices' for alternatives.\n",
driver->driver.name);
return 0;
}
@@ -2677,8 +2769,9 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
temp_client->adapter = adapter;
for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
- dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
- "addr 0x%02x\n", adap_id, address_list[i]);
+ dev_dbg(&adapter->dev,
+ "found normal entry for adapter %d, addr 0x%02x\n",
+ adap_id, address_list[i]);
temp_client->addr = address_list[i];
err = i2c_detect_address(temp_client, driver);
if (unlikely(err))
@@ -2710,15 +2803,16 @@ i2c_new_probed_device(struct i2c_adapter *adap,
for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
/* Check address validity */
if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) {
- dev_warn(&adap->dev, "Invalid 7-bit address "
- "0x%02x\n", addr_list[i]);
+ dev_warn(&adap->dev, "Invalid 7-bit address 0x%02x\n",
+ addr_list[i]);
continue;
}
/* Check address availability (7 bit, no need to encode flags) */
if (i2c_check_addr_busy(adap, addr_list[i])) {
- dev_dbg(&adap->dev, "Address 0x%02x already in "
- "use, not probing\n", addr_list[i]);
+ dev_dbg(&adap->dev,
+ "Address 0x%02x already in use, not probing\n",
+ addr_list[i]);
continue;
}
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 8eee98634cda..83768e85a919 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -159,7 +159,7 @@ static int i2c_mux_trylock_bus(struct i2c_adapter *adapter, unsigned int flags)
return 0; /* mux_lock not locked, failure */
if (!(flags & I2C_LOCK_ROOT_ADAPTER))
return 1; /* we only want mux_lock, success */
- if (parent->trylock_bus(parent, flags))
+ if (i2c_trylock_bus(parent, flags))
return 1; /* parent locked too, success */
rt_mutex_unlock(&parent->mux_lock);
return 0; /* parent not locked, failure */
@@ -193,7 +193,7 @@ static int i2c_parent_trylock_bus(struct i2c_adapter *adapter,
if (!rt_mutex_trylock(&parent->mux_lock))
return 0; /* mux_lock not locked, failure */
- if (parent->trylock_bus(parent, flags))
+ if (i2c_trylock_bus(parent, flags))
return 1; /* parent locked too, success */
rt_mutex_unlock(&parent->mux_lock);
return 0; /* parent not locked, failure */
@@ -255,6 +255,10 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
muxc->dev = dev;
if (flags & I2C_MUX_LOCKED)
muxc->mux_locked = true;
+ if (flags & I2C_MUX_ARBITRATOR)
+ muxc->arbitrator = true;
+ if (flags & I2C_MUX_GATE)
+ muxc->gate = true;
muxc->select = select;
muxc->deselect = deselect;
muxc->max_adapters = max_adapters;
@@ -263,6 +267,18 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
}
EXPORT_SYMBOL_GPL(i2c_mux_alloc);
+static const struct i2c_lock_operations i2c_mux_lock_ops = {
+ .lock_bus = i2c_mux_lock_bus,
+ .trylock_bus = i2c_mux_trylock_bus,
+ .unlock_bus = i2c_mux_unlock_bus,
+};
+
+static const struct i2c_lock_operations i2c_parent_lock_ops = {
+ .lock_bus = i2c_parent_lock_bus,
+ .trylock_bus = i2c_parent_trylock_bus,
+ .unlock_bus = i2c_parent_unlock_bus,
+};
+
int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
u32 force_nr, u32 chan_id,
unsigned int class)
@@ -312,15 +328,10 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
priv->adap.retries = parent->retries;
priv->adap.timeout = parent->timeout;
priv->adap.quirks = parent->quirks;
- if (muxc->mux_locked) {
- priv->adap.lock_bus = i2c_mux_lock_bus;
- priv->adap.trylock_bus = i2c_mux_trylock_bus;
- priv->adap.unlock_bus = i2c_mux_unlock_bus;
- } else {
- priv->adap.lock_bus = i2c_parent_lock_bus;
- priv->adap.trylock_bus = i2c_parent_trylock_bus;
- priv->adap.unlock_bus = i2c_parent_unlock_bus;
- }
+ if (muxc->mux_locked)
+ priv->adap.lock_ops = &i2c_mux_lock_ops;
+ else
+ priv->adap.lock_ops = &i2c_parent_lock_ops;
/* Sanity check on class */
if (i2c_mux_parent_classes(parent) & class)
@@ -335,18 +346,42 @@ int i2c_mux_add_adapter(struct i2c_mux_core *muxc,
* nothing if !CONFIG_OF.
*/
if (muxc->dev->of_node) {
- struct device_node *child;
+ struct device_node *dev_node = muxc->dev->of_node;
+ struct device_node *mux_node, *child = NULL;
u32 reg;
- for_each_child_of_node(muxc->dev->of_node, child) {
- ret = of_property_read_u32(child, "reg", &reg);
- if (ret)
- continue;
- if (chan_id == reg) {
- priv->adap.dev.of_node = child;
- break;
+ if (muxc->arbitrator)
+ mux_node = of_get_child_by_name(dev_node, "i2c-arb");
+ else if (muxc->gate)
+ mux_node = of_get_child_by_name(dev_node, "i2c-gate");
+ else
+ mux_node = of_get_child_by_name(dev_node, "i2c-mux");
+
+ if (mux_node) {
+ /* A "reg" property indicates an old-style DT entry */
+ if (!of_property_read_u32(mux_node, "reg", &reg)) {
+ of_node_put(mux_node);
+ mux_node = NULL;
+ }
+ }
+
+ if (!mux_node)
+ mux_node = of_node_get(dev_node);
+ else if (muxc->arbitrator || muxc->gate)
+ child = of_node_get(mux_node);
+
+ if (!child) {
+ for_each_child_of_node(mux_node, child) {
+ ret = of_property_read_u32(child, "reg", &reg);
+ if (ret)
+ continue;
+ if (chan_id == reg)
+ break;
}
}
+
+ priv->adap.dev.of_node = child;
+ of_node_put(mux_node);
}
/*
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
index a90bbc4037dd..86fc2d4c081b 100644
--- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -130,7 +130,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
return -EINVAL;
}
- muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), 0,
+ muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), I2C_MUX_ARBITRATOR,
i2c_arbitrator_select, i2c_arbitrator_deselect);
if (!muxc)
return -ENOMEM;
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index 3cb8af635db5..4ea7e691afc7 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -85,6 +85,13 @@ static const struct i2c_device_id pca9541_id[] = {
MODULE_DEVICE_TABLE(i2c, pca9541_id);
+#ifdef CONFIG_OF
+static const struct of_device_id pca9541_of_match[] = {
+ { .compatible = "nxp,pca9541" },
+ {}
+};
+#endif
+
/*
* Write to chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
* as they will try to lock the adapter a second time.
@@ -349,7 +356,8 @@ static int pca9541_probe(struct i2c_client *client,
force = 0;
if (pdata)
force = pdata->modes[0].adap_id;
- muxc = i2c_mux_alloc(adap, &client->dev, 1, sizeof(*data), 0,
+ muxc = i2c_mux_alloc(adap, &client->dev, 1, sizeof(*data),
+ I2C_MUX_ARBITRATOR,
pca9541_select_chan, pca9541_release_chan);
if (!muxc)
return -ENOMEM;
@@ -382,6 +390,7 @@ static int pca9541_remove(struct i2c_client *client)
static struct i2c_driver pca9541_driver = {
.driver = {
.name = "pca9541",
+ .of_match_table = of_match_ptr(pca9541_of_match),
},
.probe = pca9541_probe,
.remove = pca9541_remove,
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 3278ebf1cc5c..1091346f2480 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -42,6 +42,7 @@
#include <linux/i2c/pca954x.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/pm.h>
#include <linux/slab.h>
@@ -58,14 +59,6 @@ enum pca_type {
pca_9548,
};
-struct pca954x {
- enum pca_type type;
-
- u8 last_chan; /* last register value */
- u8 deselect;
- struct i2c_client *client;
-};
-
struct chip_desc {
u8 nchans;
u8 enable; /* used for muxes only */
@@ -75,6 +68,14 @@ struct chip_desc {
} muxtype;
};
+struct pca954x {
+ const struct chip_desc *chip;
+
+ u8 last_chan; /* last register value */
+ u8 deselect;
+ struct i2c_client *client;
+};
+
/* Provide specs for the PCA954x types we know about */
static const struct chip_desc chips[] = {
[pca_9540] = {
@@ -119,6 +120,20 @@ static const struct i2c_device_id pca954x_id[] = {
};
MODULE_DEVICE_TABLE(i2c, pca954x_id);
+#ifdef CONFIG_OF
+static const struct of_device_id pca954x_of_match[] = {
+ { .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
+ { .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
+ { .compatible = "nxp,pca9543", .data = &chips[pca_9543] },
+ { .compatible = "nxp,pca9544", .data = &chips[pca_9544] },
+ { .compatible = "nxp,pca9545", .data = &chips[pca_9545] },
+ { .compatible = "nxp,pca9546", .data = &chips[pca_9546] },
+ { .compatible = "nxp,pca9547", .data = &chips[pca_9547] },
+ { .compatible = "nxp,pca9548", .data = &chips[pca_9548] },
+ {}
+};
+#endif
+
/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
for this as they will try to lock adapter a second time */
static int pca954x_reg_write(struct i2c_adapter *adap,
@@ -151,7 +166,7 @@ static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
{
struct pca954x *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
- const struct chip_desc *chip = &chips[data->type];
+ const struct chip_desc *chip = data->chip;
u8 regval;
int ret = 0;
@@ -197,6 +212,7 @@ static int pca954x_probe(struct i2c_client *client,
int num, force, class;
struct i2c_mux_core *muxc;
struct pca954x *data;
+ const struct of_device_id *match;
int ret;
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
@@ -226,14 +242,19 @@ static int pca954x_probe(struct i2c_client *client,
return -ENODEV;
}
- data->type = id->driver_data;
+ match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
+ if (match)
+ data->chip = of_device_get_match_data(&client->dev);
+ else
+ data->chip = &chips[id->driver_data];
+
data->last_chan = 0; /* force the first selection */
idle_disconnect_dt = of_node &&
of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
/* Now create an adapter for each channel */
- for (num = 0; num < chips[data->type].nchans; num++) {
+ for (num = 0; num < data->chip->nchans; num++) {
bool idle_disconnect_pd = false;
force = 0; /* dynamic adap number */
@@ -263,7 +284,7 @@ static int pca954x_probe(struct i2c_client *client,
dev_info(&client->dev,
"registered %d multiplexed busses for I2C %s %s\n",
- num, chips[data->type].muxtype == pca954x_ismux
+ num, data->chip->muxtype == pca954x_ismux
? "mux" : "switch", client->name);
return 0;
@@ -299,6 +320,7 @@ static struct i2c_driver pca954x_driver = {
.driver = {
.name = "pca954x",
.pm = &pca954x_pm,
+ .of_match_table = of_match_ptr(pca954x_of_match),
},
.probe = pca954x_probe,
.remove = pca954x_remove,
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 3cdf8e1ca0ad..051b14766ef9 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -593,6 +593,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
struct at24_data *at24;
int err;
unsigned i, num_addresses;
+ u8 test_byte;
if (client->dev.platform_data) {
chip = *(struct at24_platform_data *)client->dev.platform_data;
@@ -743,6 +744,18 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
}
}
+ i2c_set_clientdata(client, at24);
+
+ /*
+ * Perform a one-byte test read to verify that the
+ * chip is functional.
+ */
+ err = at24_read(at24, 0, &test_byte, 1);
+ if (err) {
+ err = -ENODEV;
+ goto err_clients;
+ }
+
at24->nvmem_config.name = dev_name(&client->dev);
at24->nvmem_config.dev = &client->dev;
at24->nvmem_config.read_only = !writable;
@@ -764,8 +777,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
goto err_clients;
}
- i2c_set_clientdata(client, at24);
-
dev_info(&client->dev, "%u byte %s EEPROM, %s, %u bytes/write\n",
chip.byte_len, client->name,
writable ? "writable" : "read-only", at24->write_max);