diff options
author | Bartosz Golaszewski <brgl@bgdev.pl> | 2017-12-18 18:16:46 +0100 |
---|---|---|
committer | Bartosz Golaszewski <brgl@bgdev.pl> | 2018-01-01 19:40:49 +0100 |
commit | ec3c2d518b163dd2be48ac1fee8d7f1686cd769f (patch) | |
tree | 30547bd56ca22c329c96c361532e576adaa74c41 /drivers | |
parent | aa4ce22897e159ec7ecf396c199ba0edcef886c3 (diff) | |
download | linux-ec3c2d518b163dd2be48ac1fee8d7f1686cd769f.tar.bz2 |
eeprom: at24: use a common prefix for all symbols in at24.c
There are a couple symbols defined in the driver source file which are
missing the at24_ prefix. This patch fixes that.
For module params: use module_param_named() in order to not break
userspace.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/misc/eeprom/at24.c | 34 |
1 files changed, 18 insertions, 16 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index b30db99cd951..657074ec0e64 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -93,17 +93,17 @@ struct at24_data { * * This value is forced to be a power of two so that writes align on pages. */ -static unsigned int io_limit = 128; -module_param(io_limit, uint, 0); -MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)"); +static unsigned int at24_io_limit = 128; +module_param_named(io_limit, at24_io_limit, uint, 0); +MODULE_PARM_DESC(at24_io_limit, "Maximum bytes per I/O (default 128)"); /* * Specs often allow 5 msec for a page write, sometimes 20 msec; * it's important to recover from write timeouts. */ -static unsigned int write_timeout = 25; -module_param(write_timeout, uint, 0); -MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)"); +static unsigned int at24_write_timeout = 25; +module_param_named(write_timeout, at24_write_timeout, uint, 0); +MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); #define AT24_SIZE_BYTELEN 5 #define AT24_SIZE_FLAGS 8 @@ -126,8 +126,9 @@ MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)"); * iteration of processing the request. Both should be unsigned integers * holding at least 32 bits. */ -#define loop_until_timeout(tout, op_time) \ - for (tout = jiffies + msecs_to_jiffies(write_timeout), op_time = 0; \ +#define at24_loop_until_timeout(tout, op_time) \ + for (tout = jiffies + msecs_to_jiffies(at24_write_timeout), \ + op_time = 0; \ op_time ? time_before(op_time, tout) : true; \ usleep_range(1000, 1500), op_time = jiffies) @@ -286,8 +287,8 @@ static size_t at24_adjust_read_count(struct at24_data *at24, count = remainder; } - if (count > io_limit) - count = io_limit; + if (count > at24_io_limit) + count = at24_io_limit; return count; } @@ -309,7 +310,7 @@ static ssize_t at24_regmap_read(struct at24_data *at24, char *buf, /* adjust offset for mac and serial read ops */ offset += at24->offset_adj; - loop_until_timeout(timeout, read_time) { + at24_loop_until_timeout(timeout, read_time) { ret = regmap_bulk_read(regmap, offset, buf, count); dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", count, offset, ret, jiffies); @@ -360,7 +361,7 @@ static ssize_t at24_regmap_write(struct at24_data *at24, const char *buf, client = at24_client->client; count = at24_adjust_write_count(at24, offset, count); - loop_until_timeout(timeout, write_time) { + at24_loop_until_timeout(timeout, write_time) { ret = regmap_bulk_write(regmap, offset, buf, count); dev_dbg(&client->dev, "write %zu@%d --> %d (%ld)\n", count, offset, ret, jiffies); @@ -628,7 +629,8 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) writable = !(chip.flags & AT24_FLAG_READONLY); if (writable) { - at24->write_max = min_t(unsigned int, chip.page_size, io_limit); + at24->write_max = min_t(unsigned int, + chip.page_size, at24_io_limit); if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C) && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; @@ -743,12 +745,12 @@ static struct i2c_driver at24_driver = { static int __init at24_init(void) { - if (!io_limit) { - pr_err("at24: io_limit must not be 0!\n"); + if (!at24_io_limit) { + pr_err("at24: at24_io_limit must not be 0!\n"); return -EINVAL; } - io_limit = rounddown_pow_of_two(io_limit); + at24_io_limit = rounddown_pow_of_two(at24_io_limit); return i2c_add_driver(&at24_driver); } module_init(at24_init); |