summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-11-16 07:47:18 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-11-16 07:47:18 -0800
commitec0148736f54667641e3e24fa06d47db01d4ba7e (patch)
treebc3c99a1275e64087f14ce35278f2c522e66c78e /drivers
parentd6ee1a2894c445a0bed1d2dc04e8f13f1f6c0311 (diff)
parente592c5d0b7db94b485b4a2342db041a1882b7f75 (diff)
downloadlinux-ec0148736f54667641e3e24fa06d47db01d4ba7e.tar.bz2
Merge tag 'usb-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman: "Here are some USB fixes for the 3.7 tree. Nothing huge here, just a number of tiny bugfixes resolving issues that have been found, and two reverts of patches that were found to have caused problems. All of these have been in linux-next already. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "USB/host: Cleanup unneccessary irq disable code" USB: option: add Alcatel X220/X500D USB IDs USB: option: add Novatel E362 and Dell Wireless 5800 USB IDs USB: keyspan: fix typo causing GPF on open USB: fix build with XEN and EARLY_PRINTK_DBGP enabled but USB_SUPPORT disabled USB: usb_wwan: fix bulk-urb allocation usb: otg: Fix build errors if USB_MUSB_OMAP2PLUS is selected as module usb: musb: ux500: fix 'musbid' undeclared error in ux500_remove() Revert "usb: musb: use DMA mode 1 whenever possible"
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/core/hcd.c16
-rw-r--r--drivers/usb/early/ehci-dbgp.c15
-rw-r--r--drivers/usb/host/ehci-ls1x.c2
-rw-r--r--drivers/usb/host/ohci-xls.c2
-rw-r--r--drivers/usb/musb/musb_gadget.c30
-rw-r--r--drivers/usb/musb/ux500.c2
-rw-r--r--drivers/usb/otg/Kconfig4
-rw-r--r--drivers/usb/serial/keyspan.c3
-rw-r--r--drivers/usb/serial/option.c9
-rw-r--r--drivers/usb/serial/usb_wwan.c10
10 files changed, 71 insertions, 22 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 1e741bca0265..f034716190ff 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2151,8 +2151,15 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum);
irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
+ unsigned long flags;
irqreturn_t rc;
+ /* IRQF_DISABLED doesn't work correctly with shared IRQs
+ * when the first handler doesn't use it. So let's just
+ * assume it's never used.
+ */
+ local_irq_save(flags);
+
if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
rc = IRQ_NONE;
else if (hcd->driver->irq(hcd) == IRQ_NONE)
@@ -2160,6 +2167,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
else
rc = IRQ_HANDLED;
+ local_irq_restore(flags);
return rc;
}
EXPORT_SYMBOL_GPL(usb_hcd_irq);
@@ -2347,6 +2355,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd,
int retval;
if (hcd->driver->irq) {
+
+ /* IRQF_DISABLED doesn't work as advertised when used together
+ * with IRQF_SHARED. As usb_hcd_irq() will always disable
+ * interrupts we can remove it here.
+ */
+ if (irqflags & IRQF_SHARED)
+ irqflags &= ~IRQF_DISABLED;
+
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index e426ad626d74..4bfa78af379c 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -20,6 +20,7 @@
#include <linux/usb/ehci_def.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/kconfig.h>
#include <linux/kgdb.h>
#include <linux/kthread.h>
#include <asm/io.h>
@@ -614,12 +615,6 @@ err:
return -ENODEV;
}
-int dbgp_external_startup(struct usb_hcd *hcd)
-{
- return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
-}
-EXPORT_SYMBOL_GPL(dbgp_external_startup);
-
static int ehci_reset_port(int port)
{
u32 portsc;
@@ -979,6 +974,7 @@ struct console early_dbgp_console = {
.index = -1,
};
+#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
int dbgp_reset_prep(struct usb_hcd *hcd)
{
int ret = xen_dbgp_reset_prep(hcd);
@@ -1007,6 +1003,13 @@ int dbgp_reset_prep(struct usb_hcd *hcd)
}
EXPORT_SYMBOL_GPL(dbgp_reset_prep);
+int dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
+}
+EXPORT_SYMBOL_GPL(dbgp_external_startup);
+#endif /* USB_EHCI_HCD */
+
#ifdef CONFIG_KGDB
static char kgdbdbgp_buf[DBGP_MAX_PACKET];
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
index ca759652626b..aa0f328922df 100644
--- a/drivers/usb/host/ehci-ls1x.c
+++ b/drivers/usb/host/ehci-ls1x.c
@@ -113,7 +113,7 @@ static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
goto err_put_hcd;
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret)
goto err_put_hcd;
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
index 84201cd1a472..41e378f17c66 100644
--- a/drivers/usb/host/ohci-xls.c
+++ b/drivers/usb/host/ohci-xls.c
@@ -56,7 +56,7 @@ static int ohci_xls_probe_internal(const struct hc_driver *driver,
goto err3;
}
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err4;
return retval;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d0b87e7b4abf..b6b84dacc791 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req)
fifo_count = musb_readw(epio, MUSB_RXCOUNT);
/*
- * use mode 1 only if we expect data of at least ep packet_sz
- * and have not yet received a short packet
+ * Enable Mode 1 on RX transfers only when short_not_ok flag
+ * is set. Currently short_not_ok flag is set only from
+ * file_storage and f_mass_storage drivers
*/
- if ((request->length - request->actual >= musb_ep->packet_sz) &&
- (fifo_count >= musb_ep->packet_sz))
+
+ if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
use_mode_1 = 1;
else
use_mode_1 = 0;
@@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req)
c = musb->dma_controller;
channel = musb_ep->dma;
+ /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+ * mode 0 only. So we do not get endpoint interrupts due to DMA
+ * completion. We only get interrupts from DMA controller.
+ *
+ * We could operate in DMA mode 1 if we knew the size of the tranfer
+ * in advance. For mass storage class, request->length = what the host
+ * sends, so that'd work. But for pretty much everything else,
+ * request->length is routinely more than what the host sends. For
+ * most these gadgets, end of is signified either by a short packet,
+ * or filling the last byte of the buffer. (Sending extra data in
+ * that last pckate should trigger an overflow fault.) But in mode 1,
+ * we don't get DMA completion interrupt for short packets.
+ *
+ * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+ * to get endpoint interrupt on every DMA req, but that didn't seem
+ * to work reliably.
+ *
+ * REVISIT an updated g_file_storage can set req->short_not_ok, which
+ * then becomes usable as a runtime "use mode 1" hint...
+ */
+
/* Experimental: Mode1 works with mass storage use cases */
if (use_mode_1) {
csr |= MUSB_RXCSR_AUTOCLEAR;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index d62a91fedc22..0e62f504410e 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -65,7 +65,7 @@ static int __devinit ux500_probe(struct platform_device *pdev)
struct platform_device *musb;
struct ux500_glue *glue;
struct clk *clk;
-
+ int musbid;
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index d8c8a42bff3e..6223062d5d1b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
- depends on TWL4030_CORE && REGULATOR_TWL4030
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL4030
@@ -68,7 +68,7 @@ config TWL4030_USB
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
- depends on TWL4030_CORE && OMAP_USB2
+ depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL6030
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 7179b0c5f814..cff8dd5b462d 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2430,7 +2430,7 @@ static void keyspan_release(struct usb_serial *serial)
static int keyspan_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- struct keyspan_port_private *s_priv;
+ struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
struct callbacks *cback;
@@ -2445,7 +2445,6 @@ static int keyspan_port_probe(struct usb_serial_port *port)
if (!p_priv)
return -ENOMEM;
- s_priv = usb_get_serial_data(port->serial);
p_priv->device_details = d_details;
/* Setup values for the various callback routines */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5dee7d61241e..edc64bb6f457 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,6 +158,7 @@ static void option_instat_callback(struct urb *urb);
#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
+#define NOVATELWIRELESS_PRODUCT_E362 0x9010
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
@@ -193,6 +194,9 @@ static void option_instat_callback(struct urb *urb);
#define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181
#define DELL_PRODUCT_5730_MINICARD_VZW 0x8182
+#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */
+#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */
+
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
#define KYOCERA_PRODUCT_KPC680 0x180a
@@ -283,6 +287,7 @@ static void option_instat_callback(struct urb *urb);
/* ALCATEL PRODUCTS */
#define ALCATEL_VENDOR_ID 0x1bbb
#define ALCATEL_PRODUCT_X060S_X200 0x0000
+#define ALCATEL_PRODUCT_X220_X500D 0x0017
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
@@ -706,6 +711,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -728,6 +734,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1157,6 +1165,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 61a73ad1a187..a3e9c095f0d8 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -455,9 +455,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
struct usb_serial *serial = port->serial;
struct urb *urb;
- if (endpoint == -1)
- return NULL; /* endpoint not needed */
-
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
dev_dbg(&serial->interface->dev,
@@ -489,6 +486,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
init_usb_anchor(&portdata->delayed);
for (i = 0; i < N_IN_URB; i++) {
+ if (!port->bulk_in_size)
+ break;
+
buffer = (u8 *)__get_free_page(GFP_KERNEL);
if (!buffer)
goto bail_out_error;
@@ -502,8 +502,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
}
for (i = 0; i < N_OUT_URB; i++) {
- if (port->bulk_out_endpointAddress == -1)
- continue;
+ if (!port->bulk_out_size)
+ break;
buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
if (!buffer)