summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-13 12:00:02 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-13 12:00:02 -0800
commita2013a13e68354e0c8f3696b69701803e13fb737 (patch)
treea7e1da6bfad1aa2afd83f401874d606269ce90b4 /drivers
parentdadfab4873256d2145640c0ce468fcbfb48977fe (diff)
parent106f9d9337f65bd428c0c79f650e3489e458d771 (diff)
downloadlinux-a2013a13e68354e0c8f3696b69701803e13fb737.tar.bz2
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/acpica/dsopcode.c2
-rw-r--r--drivers/char/ipmi/ipmi_msghandler.c2
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c2
-rw-r--r--drivers/char/ppdev.c6
-rw-r--r--drivers/eisa/eisa.ids4
-rw-r--r--drivers/firewire/init_ohci1394_dma.c4
-rw-r--r--drivers/firewire/ohci.c2
-rw-r--r--drivers/gpio/Kconfig2
-rw-r--r--drivers/gpu/drm/radeon/evergreen.c2
-rw-r--r--drivers/gpu/drm/radeon/ni.c4
-rw-r--r--drivers/gpu/drm/radeon/radeon_ring.c4
-rw-r--r--drivers/gpu/drm/radeon/si.c6
-rw-r--r--drivers/i2c/busses/i2c-nuc900.c2
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c4
-rw-r--r--drivers/isdn/hisax/amd7930_fn.c2
-rw-r--r--drivers/isdn/hisax/isar.c2
-rw-r--r--drivers/md/md.c2
-rw-r--r--drivers/md/persistent-data/dm-block-manager.c4
-rw-r--r--drivers/md/persistent-data/dm-btree.h2
-rw-r--r--drivers/md/raid5.c2
-rw-r--r--drivers/media/dvb-frontends/drxk_hard.c2
-rw-r--r--drivers/media/platform/mx2_emmaprp.c2
-rw-r--r--drivers/message/i2o/README.ioctl12
-rw-r--r--drivers/message/i2o/i2o_block.c2
-rw-r--r--drivers/message/i2o/i2o_config.c2
-rw-r--r--drivers/mmc/host/Kconfig2
-rw-r--r--drivers/mtd/maps/plat-ram.c2
-rw-r--r--drivers/mtd/nand/s3c2410.c2
-rw-r--r--drivers/net/bonding/bonding.h2
-rw-r--r--drivers/net/ethernet/8390/ax88796.c2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c2
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_ethtool.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/eq.c2
-rw-r--r--drivers/net/ethernet/micrel/ksz884x.c2
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h2
-rw-r--r--drivers/net/sungem_phy.c8
-rw-r--r--drivers/net/wimax/i2400m/debugfs.c1
-rw-r--r--drivers/net/wireless/atmel.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.h2
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.c2
-rw-r--r--drivers/regulator/palmas-regulator.c2
-rw-r--r--drivers/remoteproc/remoteproc_elf_loader.c4
-rw-r--r--drivers/rtc/rtc-isl1208.c2
-rw-r--r--drivers/rtc/rtc-s3c.c2
-rw-r--r--drivers/s390/block/dasd_devmap.c2
-rw-r--r--drivers/scsi/bnx2fc/bnx2fc_hwi.c2
-rw-r--r--drivers/scsi/libsas/sas_expander.c2
-rw-r--r--drivers/scsi/qla2xxx/qla_isr.c4
-rw-r--r--drivers/scsi/qla2xxx/qla_nx.c4
-rw-r--r--drivers/scsi/qla2xxx/qla_target.c12
-rw-r--r--drivers/scsi/qla2xxx/tcm_qla2xxx.c2
-rw-r--r--drivers/staging/comedi/drivers/usbdux.c2
-rw-r--r--drivers/staging/tidspbridge/rmgr/node.c2
-rw-r--r--drivers/target/iscsi/iscsi_target_configfs.c2
-rw-r--r--drivers/target/iscsi/iscsi_target_erl0.c6
-rw-r--r--drivers/target/iscsi/iscsi_target_parameters.c1
-rw-r--r--drivers/target/iscsi/iscsi_target_util.c2
-rw-r--r--drivers/thermal/Kconfig2
-rw-r--r--drivers/tty/hvc/hvc_opal.c2
-rw-r--r--drivers/tty/hvc/hvc_vio.c2
-rw-r--r--drivers/tty/ipwireless/setup_protocol.h2
-rw-r--r--drivers/tty/serial/8250/Kconfig2
-rw-r--r--drivers/tty/serial/bfin_uart.c2
-rw-r--r--drivers/tty/serial/icom.c2
-rw-r--r--drivers/usb/core/driver.c2
-rw-r--r--drivers/usb/gadget/at91_udc.c2
-rw-r--r--drivers/usb/storage/realtek_cr.c2
-rw-r--r--drivers/vhost/tcm_vhost.c2
-rw-r--r--drivers/watchdog/booke_wdt.c2
-rw-r--r--drivers/xen/xen-pciback/pci_stub.c2
70 files changed, 96 insertions, 98 deletions
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index 0df024e5fb63..d09c6b4bab2c 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Module Name: dsopcode - Dispatcher suport for regions and fields
+ * Module Name: dsopcode - Dispatcher support for regions and fields
*
*****************************************************************************/
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index a0c84bb30856..053201b062a4 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -3789,7 +3789,7 @@ static int handle_one_recv_msg(ipmi_smi_t intf,
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
&& (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) {
- /* It's an asyncronous event. */
+ /* It's an asynchronous event. */
requeue = handle_read_event_rsp(intf, msg);
} else {
/* It's a response from the local BMC. */
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 20ab5b3a8915..cfdfecd5bc76 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -155,7 +155,7 @@ enum si_stat_indexes {
/* Number of watchdog pretimeouts. */
SI_STAT_watchdog_pretimeouts,
- /* Number of asyncronous messages received. */
+ /* Number of asynchronous messages received. */
SI_STAT_incoming_messages,
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index d0d824ebf2c1..1cd49241e60e 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -251,12 +251,8 @@ static ssize_t pp_write (struct file * file, const char __user * buf,
break;
}
- if (signal_pending (current)) {
- if (!bytes_written) {
- bytes_written = -EINTR;
- }
+ if (signal_pending (current))
break;
- }
cond_resched();
}
diff --git a/drivers/eisa/eisa.ids b/drivers/eisa/eisa.ids
index 6cbb7a514436..2d864b48a48f 100644
--- a/drivers/eisa/eisa.ids
+++ b/drivers/eisa/eisa.ids
@@ -985,8 +985,8 @@ ISABD00 "Racal-Interlan NP600A Ethernet 16bit"
ISABD02 "Racal-Interlan NI5210/8 Ethernet"
ISABD03 "Racal-Interlan NI5210/16 Ethernet"
ISABE00 "Qua Tech PXB-1608 Parallel Expansion Board"
-ISABE01 "Qua Tech ES-100 8 Channel Asyncronous"
-ISABE02 "Qua Tech QS-100M 4 Channel Asyncronous"
+ISABE01 "Qua Tech ES-100 8 Channel Asynchronous"
+ISABE02 "Qua Tech QS-100M 4 Channel Asynchronous"
ISABE03 "Qua Tech MXI-100 IEEE 488 GPIB"
ISABE04 "Qua Tech DS-201 Dual Channel RS-422"
ISABE05 "Qua Tech PXB-721 Parallel Expansion"
diff --git a/drivers/firewire/init_ohci1394_dma.c b/drivers/firewire/init_ohci1394_dma.c
index a9a347adb353..2cc89ce745c9 100644
--- a/drivers/firewire/init_ohci1394_dma.c
+++ b/drivers/firewire/init_ohci1394_dma.c
@@ -149,10 +149,10 @@ static inline void __init init_ohci1394_initialize(struct ohci *ohci)
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
- /* Accept asyncronous transfer requests from all nodes for now */
+ /* Accept asynchronous transfer requests from all nodes for now */
reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
- /* Specify asyncronous transfer retries */
+ /* Specify asynchronous transfer retries */
reg_write(ohci, OHCI1394_ATRetries,
OHCI1394_MAX_AT_REQ_RETRIES |
(OHCI1394_MAX_AT_RESP_RETRIES<<4) |
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index f25610bb3148..6ce6e07c38c1 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1281,7 +1281,7 @@ static int at_context_queue_packet(struct context *ctx,
d[0].res_count = cpu_to_le16(packet->timestamp);
/*
- * The DMA format for asyncronous link packets is different
+ * The DMA format for asynchronous link packets is different
* from the IEEE1394 layout, so shift the fields around
* accordingly.
*/
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a5cbeec6f6db..bf892bd68c17 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -504,7 +504,7 @@ config GPIO_ADNP
help
This option enables support for N GPIOs found on Avionic Design
I2C GPIO expanders. The register space will be extended by powers
- of two, so the controller will need to accomodate for that. For
+ of two, so the controller will need to accommodate for that. For
example: if a controller provides 48 pins, 6 registers will be
enough to represent all pins, but the driver will assume a
register layout for 64 pins (8 registers).
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 219942c660d7..5d1d21a6dcdd 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1650,7 +1650,7 @@ static int evergreen_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
((rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC));
WREG32(CP_RB_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 81e6a568c29d..cda01f808f12 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1059,7 +1059,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
WREG32(CP_DEBUG, (1 << 27));
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(SCRATCH_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_SCRATCH_OFFSET) >> 8) & 0xFFFFFFFF);
WREG32(SCRATCH_UMSK, 0xff);
@@ -1076,7 +1076,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
#endif
WREG32(cp_rb_cntl[i], rb_cntl);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
addr = rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET;
WREG32(cp_rb_rptr_addr[i], addr & 0xFFFFFFFC);
WREG32(cp_rb_rptr_addr_hi[i], upper_32_bits(addr) & 0xFF);
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 47634f27f2e5..ebd69562ef6c 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -459,7 +459,7 @@ void radeon_ring_unlock_commit(struct radeon_device *rdev, struct radeon_ring *r
*
* @ring: radeon_ring structure holding ring information
*
- * Reset the driver's copy of the wtpr (all asics).
+ * Reset the driver's copy of the wptr (all asics).
*/
void radeon_ring_undo(struct radeon_ring *ring)
{
@@ -503,7 +503,7 @@ void radeon_ring_force_activity(struct radeon_device *rdev, struct radeon_ring *
}
/**
- * radeon_ring_force_activity - update lockup variables
+ * radeon_ring_lockup_update - update lockup variables
*
* @ring: radeon_ring structure holding ring information
*
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 4422d630b33b..010156dd949f 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2007,7 +2007,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB0_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB0_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
@@ -2040,7 +2040,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB1_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB1_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFF);
@@ -2066,7 +2066,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB2_WPTR, ring->wptr);
- /* set the wb address wether it's enabled or not */
+ /* set the wb address whether it's enabled or not */
WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB2_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFF);
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index f41502ef3f55..a23b91b0b738 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -304,7 +304,7 @@ retry_write:
case STATE_READ:
/* we have a byte of data in the data register, do
- * something with it, and then work out wether we are
+ * something with it, and then work out whether we are
* going to do any more read/write
*/
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 9d902725bac9..b33d95ebc890 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -208,7 +208,7 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
- /* todo - check for wether ack wanted or not */
+ /* todo - check for whether ack wanted or not */
s3c24xx_i2c_enable_ack(i2c);
iiccon = readl(i2c->regs + S3C2410_IICCON);
@@ -397,7 +397,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
case STATE_READ:
/* we have a byte of data in the data register, do
- * something with it, and then work out wether we are
+ * something with it, and then work out whether we are
* going to do any more read/write
*/
diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c
index 89342f7e0c5b..525471e776a7 100644
--- a/drivers/isdn/hisax/amd7930_fn.c
+++ b/drivers/isdn/hisax/amd7930_fn.c
@@ -628,7 +628,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg)
if ((cs->dc.amd7930.ph_state == 8)) {
/* b-channels off, PH-AR cleared
* change to F3 */
- Amd7930_ph_command(cs, 0x20, "HW_RESET REQEST"); //LMR1 bit 5
+ Amd7930_ph_command(cs, 0x20, "HW_RESET REQUEST"); //LMR1 bit 5
spin_unlock_irqrestore(&cs->lock, flags);
} else {
Amd7930_ph_command(cs, 0x40, "HW_RESET REQUEST");
diff --git a/drivers/isdn/hisax/isar.c b/drivers/isdn/hisax/isar.c
index ff5e139f4850..7fdf34704fe5 100644
--- a/drivers/isdn/hisax/isar.c
+++ b/drivers/isdn/hisax/isar.c
@@ -1417,7 +1417,7 @@ modeisar(struct BCState *bcs, int mode, int bc)
&bcs->hw.isar.reg->Flags))
bcs->hw.isar.dpath = 1;
else {
- printk(KERN_WARNING"isar modeisar both pathes in use\n");
+ printk(KERN_WARNING"isar modeisar both paths in use\n");
return (1);
}
break;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 61200717687b..bd8bf0953fe3 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4124,7 +4124,7 @@ static struct md_sysfs_entry md_size =
__ATTR(component_size, S_IRUGO|S_IWUSR, size_show, size_store);
-/* Metdata version.
+/* Metadata version.
* This is one of
* 'none' for arrays with no metadata (good luck...)
* 'external' for arrays with externally managed metadata,
diff --git a/drivers/md/persistent-data/dm-block-manager.c b/drivers/md/persistent-data/dm-block-manager.c
index 5ba277768d99..a3ae09124a67 100644
--- a/drivers/md/persistent-data/dm-block-manager.c
+++ b/drivers/md/persistent-data/dm-block-manager.c
@@ -25,7 +25,7 @@
* may be held at once. This is just an implementation detail.
*
* ii) Recursive locking attempts are detected and return EINVAL. A stack
- * trace is also emitted for the previous lock aquisition.
+ * trace is also emitted for the previous lock acquisition.
*
* iii) Priority is given to write locks.
*/
@@ -109,7 +109,7 @@ static int __check_holder(struct block_lock *lock)
DMERR("previously held here:");
print_stack_trace(lock->traces + i, 4);
- DMERR("subsequent aquisition attempted here:");
+ DMERR("subsequent acquisition attempted here:");
t.nr_entries = 0;
t.max_entries = MAX_STACK;
t.entries = entries;
diff --git a/drivers/md/persistent-data/dm-btree.h b/drivers/md/persistent-data/dm-btree.h
index ae02c84410ff..a2cd50441ca1 100644
--- a/drivers/md/persistent-data/dm-btree.h
+++ b/drivers/md/persistent-data/dm-btree.h
@@ -35,7 +35,7 @@ struct dm_transaction_manager;
*/
/*
- * Infomation about the values stored within the btree.
+ * Information about the values stored within the btree.
*/
struct dm_btree_value_type {
void *context;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index a4502686e7a8..3380372c0393 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -1576,7 +1576,7 @@ static int resize_stripes(struct r5conf *conf, int newsize)
* This happens in stages:
* 1/ create a new kmem_cache and allocate the required number of
* stripe_heads.
- * 2/ gather all the old stripe_heads and tranfer the pages across
+ * 2/ gather all the old stripe_heads and transfer the pages across
* to the new stripe_heads. This will have the side effect of
* freezing the array as once all stripe_heads have been collected,
* no IO will be possible. Old stripe heads are freed once their
diff --git a/drivers/media/dvb-frontends/drxk_hard.c b/drivers/media/dvb-frontends/drxk_hard.c
index 8b4c6d5f8f36..df9abe83f877 100644
--- a/drivers/media/dvb-frontends/drxk_hard.c
+++ b/drivers/media/dvb-frontends/drxk_hard.c
@@ -948,7 +948,7 @@ static int GetDeviceCapabilities(struct drxk_state *state)
state->m_oscClockFreq = 20250;
break;
default:
- printk(KERN_ERR "drxk: Clock Frequency is unkonwn\n");
+ printk(KERN_ERR "drxk: Clock Frequency is unknown\n");
return -EINVAL;
}
/*
diff --git a/drivers/media/platform/mx2_emmaprp.c b/drivers/media/platform/mx2_emmaprp.c
index 8f22ce543cf7..bfa65079fc38 100644
--- a/drivers/media/platform/mx2_emmaprp.c
+++ b/drivers/media/platform/mx2_emmaprp.c
@@ -371,7 +371,7 @@ static irqreturn_t emmaprp_irq(int irq_emma, void *data)
if (!curr_ctx->aborting) {
if ((irqst & PRP_INTR_ST_RDERR) ||
(irqst & PRP_INTR_ST_CH2WERR)) {
- pr_err("PrP bus error ocurred, this transfer is probably corrupted\n");
+ pr_err("PrP bus error occurred, this transfer is probably corrupted\n");
writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
} else if (irqst & PRP_INTR_ST_CH2B1CI) { /* buffer ready */
src_vb = v4l2_m2m_src_buf_remove(curr_ctx->m2m_ctx);
diff --git a/drivers/message/i2o/README.ioctl b/drivers/message/i2o/README.ioctl
index 5fb195af43e2..4a7d2ebdfc97 100644
--- a/drivers/message/i2o/README.ioctl
+++ b/drivers/message/i2o/README.ioctl
@@ -138,7 +138,7 @@ VI. Setting Parameters
The return value is the size in bytes of the data written into
ops->resbuf if no errors occur. If an error occurs, -1 is returned
- and errno is set appropriatly:
+ and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@@ -222,7 +222,7 @@ VIII. Downloading Software
RETURNS
This function returns 0 no errors occur. If an error occurs, -1
- is returned and errno is set appropriatly:
+ is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@@ -264,7 +264,7 @@ IX. Uploading Software
RETURNS
This function returns 0 if no errors occur. If an error occurs, -1
- is returned and errno is set appropriatly:
+ is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@@ -301,7 +301,7 @@ X. Removing Software
RETURNS
This function returns 0 if no errors occur. If an error occurs, -1
- is returned and errno is set appropriatly:
+ is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@@ -325,7 +325,7 @@ X. Validating Configuration
RETURNS
This function returns 0 if no erro occur. If an error occurs, -1 is
- returned and errno is set appropriatly:
+ returned and errno is set appropriately:
ETIMEDOUT Timeout waiting for reply message
ENXIO Invalid IOP number
@@ -360,7 +360,7 @@ XI. Configuration Dialog
RETURNS
This function returns 0 if no error occur. If an error occurs, -1
- is returned and errno is set appropriatly:
+ is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 4796bbf0ae4e..49e86aed2bc4 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -609,7 +609,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
u8 operation;
/*
- * This is to deail with the case of an application
+ * This is to deal with the case of an application
* opening a device and then the device disappears while
* it's in use, and then the application tries to release
* it. ex: Unmounting a deleted RAID volume at reboot.
diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c
index 9a49c243a6ac..5451beff183f 100644
--- a/drivers/message/i2o/i2o_config.c
+++ b/drivers/message/i2o/i2o_config.c
@@ -189,7 +189,7 @@ static int i2o_cfg_parms(unsigned long arg, unsigned int type)
return -ENXIO;
/*
- * Stop users being able to try and allocate arbitary amounts
+ * Stop users being able to try and allocate arbitrary amounts
* of DMA space. 64K is way more than sufficient for this.
*/
if (kcmd.oplen > 65536)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 737e4edc241b..8d13c6594520 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -533,7 +533,7 @@ config MMC_DW_PLTFM
If unsure, say Y.
config MMC_DW_EXYNOS
- tristate "Exynos specific extentions for Synopsys DW Memory Card Interface"
+ tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW
select MMC_DW_PLTFM
help
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 891558de3ec1..2de66b062f0d 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -219,7 +219,7 @@ static int platram_probe(struct platform_device *pdev)
platram_setrw(info, PLATRAM_RW);
- /* check to see if there are any available partitions, or wether
+ /* check to see if there are any available partitions, or whether
* to add this device whole */
err = mtd_device_parse_register(info->mtd, pdata->probes, NULL,
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 295e4bedad96..79ded48e7427 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -879,7 +879,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
if (chip->ecc.mode != NAND_ECC_HW)
return;
- /* change the behaviour depending on wether we are using
+ /* change the behaviour depending on whether we are using
* the large or small page nand device */
if (chip->page_shift > 10) {
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 6dded569b111..21b68e5c14fd 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -245,7 +245,7 @@ struct bonding {
struct delayed_work ad_work;
struct delayed_work mcast_work;
#ifdef CONFIG_DEBUG_FS
- /* debugging suport via debugfs */
+ /* debugging support via debugfs */
struct dentry *debug_dir;
#endif /* CONFIG_DEBUG_FS */
};
diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c
index 0338352bc036..70dba5d01ad3 100644
--- a/drivers/net/ethernet/8390/ax88796.c
+++ b/drivers/net/ethernet/8390/ax88796.c
@@ -109,7 +109,7 @@ static inline struct ax_device *to_ax_dev(struct net_device *dev)
/*
* ax_initial_check
*
- * do an initial probe for the card to check wether it exists
+ * do an initial probe for the card to check whether it exists
* and is functional
*/
static int ax_initial_check(struct net_device *dev)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index b8b4b749daab..09b625e0fdaa 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -4318,7 +4318,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
if (o->next_tx_only >= o->max_cos)
/* >= becuase tx only must always be smaller than cos since the
- * primary connection suports COS 0
+ * primary connection supports COS 0
*/
BNX2X_ERR("illegal value for next tx_only: %d. max cos was %d",
o->next_tx_only, o->max_cos);
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 9089d00f1421..14e30515f6aa 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -1671,7 +1671,7 @@ static void e1000_get_wol(struct net_device *netdev,
/* apply any specific unsupported masks here */
switch (hw->device_id) {
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- /* KSP3 does not suppport UCAST wake-ups */
+ /* KSP3 does not support UCAST wake-ups */
wol->supported &= ~WAKE_UCAST;
if (adapter->wol & E1000_WUFC_EX)
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index b84a88bc44dc..c48cf6f6529c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -1267,7 +1267,7 @@ int mlx4_test_interrupts(struct mlx4_dev *dev)
/* Temporary use polling for command completions */
mlx4_cmd_use_polling(dev);
- /* Map the new eq to handle all asyncronous events */
+ /* Map the new eq to handle all asynchronous events */
err = mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0,
priv->eq_table.eq[i].eqn);
if (err) {
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 093d594435e1..83f0ea929d3d 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -6769,7 +6769,7 @@ static int stp;
/*
* This enables fast aging in the KSZ8842 switch. Not sure what situation
* needs that. However, fast aging is used to flush the dynamic MAC table when
- * STP suport is enabled.
+ * STP support is enabled.
*/
static int fast_aging;
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
index 7ec4b864a550..75ec5e7cf50d 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h
@@ -27,7 +27,7 @@ struct mcp_gen_header {
*
* Fields below this comment are extensions added in later versions
* of this struct, drivers should compare the header_length against
- * offsetof(field) to check wether a given MCP implements them.
+ * offsetof(field) to check whether a given MCP implements them.
*
* Never remove any field. Keep everything naturally align.
*/
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index 58f13adaa549..ae7cd7f3656d 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -608,7 +608,7 @@ static int bcm5421_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* try to find out wether we have a link */
+ /* try to find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -634,7 +634,7 @@ static int bcm5421_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -681,7 +681,7 @@ static int bcm5461_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
- /* find out wether we have a link */
+ /* find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
@@ -710,7 +710,7 @@ static int bcm5461_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
- /* find out wether we are running half- or full duplex */
+ /* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c
index 4b66ab1d0e5c..6702da838b0e 100644
--- a/drivers/net/wimax/i2400m/debugfs.c
+++ b/drivers/net/wimax/i2400m/debugfs.c
@@ -209,6 +209,7 @@ int debugfs_i2400m_reset_set(void *data, u64 val)
result = i2400m_reset(i2400m, rt);
if (result >= 0)
result = 0;
+ break;
default:
result = -EINVAL;
}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 4a4e98f71807..4374079dfc2a 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -2963,7 +2963,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
ssid_el_p[1] = priv->SSID_size;
memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
- ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
+ ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.h b/drivers/net/wireless/ipw2x00/ipw2100.h
index 973125242490..5fe17cbab1f3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.h
+++ b/drivers/net/wireless/ipw2x00/ipw2100.h
@@ -1045,7 +1045,7 @@ typedef enum _ORDINAL_TABLE_1 { // NS - means Not Supported by FW
IPW_ORD_POWER_MGMT_MODE, // Power mode - 0=CAM, 1=PSP
IPW_ORD_POWER_MGMT_INDEX, //NS //
IPW_ORD_COUNTRY_CODE, // IEEE country code as recv'd from beacon
- IPW_ORD_COUNTRY_CHANNELS, // channels suported by country
+ IPW_ORD_COUNTRY_CHANNELS, // channels supported by country
// IPW_ORD_COUNTRY_CHANNELS:
// For 11b the lower 2-byte are used for channels from 1-14
// and the higher 2-byte are not used.
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index ff306d763e37..71ab320fae82 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1155,7 +1155,7 @@ int zd_chip_init_hw(struct zd_chip *chip)
if (r)
goto out;
/* Currently we support IEEE 802.11g for full and high speed USB.
- * It might be discussed, whether we should suppport pure b mode for
+ * It might be discussed, whether we should support pure b mode for
* full speed USB.
*/
r = set_mandatory_rates(chip, 1);
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 07aee694ba92..08fec06dba50 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -773,7 +773,7 @@ static __devinit int palmas_probe(struct platform_device *pdev)
/*
* read and store the RANGE bit for later use
* This must be done before regulator is probed otherwise
- * we error in probe with unsuportable ranges.
+ * we error in probe with unsupportable ranges.
*/
if (id != PALMAS_REG_SMPS10) {
addr = palmas_regs_info[id].vsel_addr;
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index e1f89d649733..0d36f94ab51d 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -66,13 +66,13 @@ rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw)
return -EINVAL;
}
- /* We assume the firmware has the same endianess as the host */
+ /* We assume the firmware has the same endianness as the host */
# ifdef __LITTLE_ENDIAN
if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) {
# else /* BIG ENDIAN */
if (ehdr->e_ident[EI_DATA] != ELFDATA2MSB) {
# endif
- dev_err(dev, "Unsupported firmware endianess\n");
+ dev_err(dev, "Unsupported firmware endianness\n");
return -EINVAL;
}
diff --git a/drivers/rtc/rtc-isl1208.c b/drivers/rtc/rtc-isl1208.c
index 26c81f233606..afb7cfa85ccc 100644
--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@@ -118,7 +118,7 @@ isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
return ret;
}
-/* simple check to see wether we have a isl1208 */
+/* simple check to see whether we have a isl1208 */
static int
isl1208_i2c_validate_client(struct i2c_client *client)
{
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 77823d21d314..a7a2a998fa91 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -186,7 +186,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR);
rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC);
- /* the only way to work out wether the system was mid-update
+ /* the only way to work out whether the system was mid-update
* when we read it is to check the second counter, and if it
* is zero, then we re-try the entire read
*/
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index b2b8c18eeced..20cfd028edcf 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -1344,7 +1344,7 @@ dasd_get_feature(struct ccw_device *cdev, int feature)
/*
* Set / reset given feature.
- * Flag indicates wether to set (!=0) or the reset (=0) the feature.
+ * Flag indicates whether to set (!=0) or the reset (=0) the feature.
*/
int
dasd_set_feature(struct ccw_device *cdev, int feature, int flag)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 6d6eee42ac7d..ef60afa94d0e 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -296,7 +296,7 @@ int bnx2fc_send_session_ofld_req(struct fcoe_port *port,
ofld_req3.flags |= (interface->vlan_enabled <<
FCOE_KWQE_CONN_OFFLOAD3_B_VLAN_FLAG_SHIFT);
- /* C2_VALID and ACK flags are not set as they are not suppported */
+ /* C2_VALID and ACK flags are not set as they are not supported */
/* Initialize offload request 4 structure */
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index efc6e72f09f3..aec2e0da5016 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1800,7 +1800,7 @@ out:
* @dev:domain device to be detect.
* @src_dev: the device which originated BROADCAST(CHANGE).
*
- * Add self-configuration expander suport. Suppose two expander cascading,
+ * Add self-configuration expander support. Suppose two expander cascading,
* when the first level expander is self-configuring, hotplug the disks in
* second level expander, BROADCAST(CHANGE) will not only be originated
* in the second level expander, but also be originated in the first level
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 5733811ce8e7..9d1c7b56090a 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -251,7 +251,7 @@ qla2x00_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
/* Read all mbox registers? */
mboxes = (1 << ha->mbx_count) - 1;
if (!ha->mcp)
- ql_dbg(ql_dbg_async, vha, 0x5001, "MBX pointer ERRROR.\n");
+ ql_dbg(ql_dbg_async, vha, 0x5001, "MBX pointer ERROR.\n");
else
mboxes = ha->mcp->in_mb;
@@ -2318,7 +2318,7 @@ qla24xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0)
/* Read all mbox registers? */
mboxes = (1 << ha->mbx_count) - 1;
if (!ha->mcp)
- ql_dbg(ql_dbg_async, vha, 0x504e, "MBX pointer ERRROR.\n");
+ ql_dbg(ql_dbg_async, vha, 0x504e, "MBX pointer ERROR.\n");
else
mboxes = ha->mcp->in_mb;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 14cd361742fa..f5e297c6b684 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -955,7 +955,7 @@ qla82xx_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp)
}
if (loops >= 50000) {
ql_log(ql_log_fatal, vha, 0x00b9,
- "Failed to aquire SEM2 lock.\n");
+ "Failed to acquire SEM2 lock.\n");
return -1;
}
ret = qla82xx_do_rom_fast_read(ha, addr, valp);
@@ -1122,7 +1122,7 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
long data;
};
- /* Halt all the indiviual PEGs and other blocks of the ISP */
+ /* Halt all the individual PEGs and other blocks of the ISP */
qla82xx_rom_lock(ha);
/* disable all I2Q */
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 62aa5584f644..b49d21779a24 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -73,7 +73,7 @@ enum fcp_resp_rsp_codes {
#define FCP_PTA_SIMPLE 0 /* simple task attribute */
#define FCP_PTA_HEADQ 1 /* head of queue task attribute */
#define FCP_PTA_ORDERED 2 /* ordered task attribute */
-#define FCP_PTA_ACA 4 /* auto. contigent allegiance */
+#define FCP_PTA_ACA 4 /* auto. contingent allegiance */
#define FCP_PTA_MASK 7 /* mask for task attribute field */
#define FCP_PRI_SHIFT 3 /* priority field starts in bit 3 */
#define FCP_PRI_RESVD_MASK 0x80 /* reserved bits in priority field */
@@ -3980,7 +3980,7 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha,
case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03a,
"qla_target(%d): System error async event %#x "
- "occured", vha->vp_idx, code);
+ "occurred", vha->vp_idx, code);
break;
case MBA_WAKEUP_THRES: /* Request Queue Wake-up. */
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
@@ -3989,7 +3989,7 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha,
case MBA_LOOP_UP:
{
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03b,
- "qla_target(%d): Async LOOP_UP occured "
+ "qla_target(%d): Async LOOP_UP occurred "
"(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
@@ -4006,7 +4006,7 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha,
case MBA_LIP_RESET:
case MBA_RSCN_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03c,
- "qla_target(%d): Async event %#x occured "
+ "qla_target(%d): Async event %#x occurred "
"(m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx, code,
le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
@@ -4015,7 +4015,7 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha,
case MBA_PORT_UPDATE:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf03d,
"qla_target(%d): Port update async event %#x "
- "occured: updating the ports database (m[0]=%x, m[1]=%x, "
+ "occurred: updating the ports database (m[0]=%x, m[1]=%x, "
"m[2]=%x, m[3]=%x)", vha->vp_idx, code,
le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
@@ -4031,7 +4031,7 @@ void qlt_async_event(uint16_t code, struct scsi_qla_host *vha,
default:
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf040,
- "qla_target(%d): Async event %#x occured: "
+ "qla_target(%d): Async event %#x occurred: "
"ignore (m[0]=%x, m[1]=%x, m[2]=%x, m[3]=%x)", vha->vp_idx,
code, le16_to_cpu(mailbox[0]), le16_to_cpu(mailbox[1]),
le16_to_cpu(mailbox[2]), le16_to_cpu(mailbox[3]));
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 3d74f2f39ae1..4372e32bc95f 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -367,7 +367,7 @@ static struct se_node_acl *tcm_qla2xxx_alloc_fabric_acl(
nacl = kzalloc(sizeof(struct tcm_qla2xxx_nacl), GFP_KERNEL);
if (!nacl) {
- pr_err("Unable to alocate struct tcm_qla2xxx_nacl\n");
+ pr_err("Unable to allocate struct tcm_qla2xxx_nacl\n");
return NULL;
}
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 78f3a2e013c4..17b45ebb0553 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -73,7 +73,7 @@ sampling rate. If you sample two channels you get 4kHz and so on.
* And loads of cleaning up, in particular streamlining the
* bulk transfers.
* 1.1: moved EP4 transfers to EP1 to make space for a PWM output on EP4
- * 1.2: added PWM suport via EP4
+ * 1.2: added PWM support via EP4
* 2.0: PWM seems to be stable and is not interfering with the other functions
* 2.1: changed PWM API
* 2.2: added firmware kernel request to fix an udev problem
diff --git a/drivers/staging/tidspbridge/rmgr/node.c b/drivers/staging/tidspbridge/rmgr/node.c
index 294e9b40f516..737f4a9d86a3 100644
--- a/drivers/staging/tidspbridge/rmgr/node.c
+++ b/drivers/staging/tidspbridge/rmgr/node.c
@@ -736,7 +736,7 @@ DBAPI node_alloc_msg_buf(struct node_object *hnode, u32 usize,
case 4:
break;
default:
- /* alignment value not suportted */
+ /* alignment value not supportted */
status = -EPERM;
break;
}
diff --git a/drivers/target/iscsi/iscsi_target_configfs.c b/drivers/target/iscsi/iscsi_target_configfs.c
index ff6fd4fb624d..0f03b7919d7c 100644
--- a/drivers/target/iscsi/iscsi_target_configfs.c
+++ b/drivers/target/iscsi/iscsi_target_configfs.c
@@ -235,7 +235,7 @@ static struct se_tpg_np *lio_target_call_addnptotpg(
* iSER/SCTP (TODO, software emulation with osc-iwarp)
* iSER/IB (TODO, hardware available)
*
- * can be enabled with atributes under
+ * can be enabled with attributes under
* sys/kernel/config/iscsi/$IQN/$TPG/np/$IP:$PORT/
*
*/
diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c
index 8aacf611b86d..8e6298cc8839 100644
--- a/drivers/target/iscsi/iscsi_target_erl0.c
+++ b/drivers/target/iscsi/iscsi_target_erl0.c
@@ -410,11 +410,11 @@ static int iscsit_dataout_pre_datapduinorder_yes(
/*
* For DataSequenceInOrder=Yes: If the offset is greater than the global
* DataPDUInOrder=Yes offset counter in struct iscsi_cmd a protcol error has
- * occured and fail the connection.
+ * occurred and fail the connection.
*
* For DataSequenceInOrder=No: If the offset is greater than the per
* sequence DataPDUInOrder=Yes offset counter in struct iscsi_seq a protocol
- * error has occured and fail the connection.
+ * error has occurred and fail the connection.
*/
if (conn->sess->sess_ops->DataSequenceInOrder) {
if (be32_to_cpu(hdr->offset) != cmd->write_data_done) {
@@ -801,7 +801,7 @@ void iscsit_start_time2retain_handler(struct iscsi_session *sess)
{
int tpg_active;
/*
- * Only start Time2Retain timer when the assoicated TPG is still in
+ * Only start Time2Retain timer when the associated TPG is still in
* an ACTIVE (eg: not disabled or shutdown) state.
*/
spin_lock(&ISCSI_TPG_S(sess)->tpg_state_lock);
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 90b740048f26..1bf7432bfcbc 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -1432,6 +1432,7 @@ static struct iscsi_param *iscsi_check_key(
break;
case PHASE_OPERATIONAL:
pr_debug("Operational phase.\n");
+ break;
default:
pr_debug("Unknown phase.\n");
}
diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c
index 1a91195ab619..69e0cfd98870 100644
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -684,7 +684,7 @@ void iscsit_release_cmd(struct iscsi_cmd *cmd)
void iscsit_free_cmd(struct iscsi_cmd *cmd)
{
/*
- * Determine if a struct se_cmd is assoicated with
+ * Determine if a struct se_cmd is associated with
* this struct iscsi_cmd.
*/
switch (cmd->iscsi_opcode) {
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 8636fae1f7ec..c2c77d1ac499 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -98,7 +98,7 @@ config EXYNOS_THERMAL
depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
depends on CPU_THERMAL
help
- If you say yes here you get support for TMU (Thermal Managment
+ If you say yes here you get support for TMU (Thermal Management
Unit) on SAMSUNG EXYNOS series of SoC.
config DB8500_THERMAL
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index be1a9a1e749e..cd69b48f6dfd 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -178,7 +178,7 @@ static int hvc_opal_probe(struct platform_device *dev)
proto = HV_PROTOCOL_HVSI;
ops = &hvc_opal_hvsi_ops;
} else {
- pr_err("hvc_opal: Unkown protocol for %s\n",
+ pr_err("hvc_opal: Unknown protocol for %s\n",
dev->dev.of_node->full_name);
return -ENXIO;
}
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index ed6f5f1f5a55..0c629807610e 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -313,7 +313,7 @@ static int hvc_vio_probe(struct vio_dev *vdev,
proto = HV_PROTOCOL_HVSI;
ops = &hvterm_hvsi_ops;
} else {
- pr_err("hvc_vio: Unkown protocol for %s\n", vdev->dev.of_node->full_name);
+ pr_err("hvc_vio: Unknown protocol for %s\n", vdev->dev.of_node->full_name);
return -ENXIO;
}
diff --git a/drivers/tty/ipwireless/setup_protocol.h b/drivers/tty/ipwireless/setup_protocol.h
index 9d6bcc77c73c..002c34e72521 100644
--- a/drivers/tty/ipwireless/setup_protocol.h
+++ b/drivers/tty/ipwireless/setup_protocol.h
@@ -59,7 +59,7 @@ struct tl_setup_config_done_msg {
unsigned char sig_no; /* TL_SETUP_SIGNO_CONFIG_DONE_MSG */
} __attribute__ ((__packed__));
-/* Asyncronous messages */
+/* Asynchronous messages */
struct tl_setup_open_msg {
unsigned char sig_no; /* TL_SETUP_SIGNO_OPEN_MSG */
unsigned char port_no;
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index f3d283f2e3aa..c31133a6ea8e 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -271,7 +271,7 @@ config SERIAL_8250_DW
present in the Synopsys DesignWare APB UART.
config SERIAL_8250_EM
- tristate "Support for Emma Mobile intergrated serial port"
+ tristate "Support for Emma Mobile integrated serial port"
depends on SERIAL_8250 && ARM && HAVE_CLK
help
Selecting this option will add support for the integrated serial
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index e6a008f4939f..2e2b2c1cb722 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -815,7 +815,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
lcr = WLS(5);
break;
default:
- printk(KERN_ERR "%s: word lengh not supported\n",
+ printk(KERN_ERR "%s: word length not supported\n",
__func__);
}
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 6197a69adb4d..72b6334bcf1a 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -505,7 +505,7 @@ static void load_code(struct icom_port *icom_port)
/* Stop processor */
stop_processor(icom_port);
- dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n");
+ dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n");
}
if (new_page != NULL)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 88dde95b6795..d938b2b99e31 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -222,7 +222,7 @@ static int usb_probe_device(struct device *dev)
/* TODO: Add real matching code */
/* The device should always appear to be in use
- * unless the driver suports autosuspend.
+ * unless the driver supports autosuspend.
*/
if (!udriver->supports_autosuspend)
error = usb_autoresume_device(udev);
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 59dcea2f6957..f4a21f6f081f 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -51,7 +51,7 @@
* full speed USB controllers, including the at91rm9200 (arm920T, with MMU),
* at91sam926x (arm926ejs, with MMU), and several no-mmu versions.
*
- * This driver expects the board has been wired with two GPIOs suppporting
+ * This driver expects the board has been wired with two GPIOs supporting
* a VBUS sensing IRQ, and a D+ pullup. (They may be omitted, but the
* testing hasn't covered such cases.)
*
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index ea5f2586fbdd..6c3586a4c956 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -883,7 +883,7 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
} else {
US_DEBUGP("%s: NOT working scsi, not SS\n", __func__);
chip->proto_handler_backup(srb, us);
- /* Check wether card is plugged in */
+ /* Check whether card is plugged in */
if (srb->cmnd[0] == TEST_UNIT_READY) {
if (srb->result == SAM_STAT_GOOD) {
SET_LUN_READY(chip, srb->device->lun);
diff --git a/drivers/vhost/tcm_vhost.c b/drivers/vhost/tcm_vhost.c
index 79e7e4d45eb2..d670130ee687 100644
--- a/drivers/vhost/tcm_vhost.c
+++ b/drivers/vhost/tcm_vhost.c
@@ -230,7 +230,7 @@ static struct se_node_acl *tcm_vhost_alloc_fabric_acl(
nacl = kzalloc(sizeof(struct tcm_vhost_nacl), GFP_KERNEL);
if (!nacl) {
- pr_err("Unable to alocate struct tcm_vhost_nacl\n");
+ pr_err("Unable to allocate struct tcm_vhost_nacl\n");
return NULL;
}
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index 5b06d31ab6a9..c0bc92d8e438 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -212,7 +212,7 @@ static long booke_wdt_ioctl(struct file *file,
return 0;
}
-/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
+/* wdt_is_active stores whether or not the /dev/watchdog device is opened */
static unsigned long wdt_is_active;
static int booke_wdt_open(struct inode *inode, struct file *file)
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 961d664e2d2f..68dcc59cd287 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -360,7 +360,7 @@ static int __devinit pcistub_init_device(struct pci_dev *dev)
if (!dev_data->pci_saved_state)
dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
else {
- dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
+ dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n");
__pci_reset_function_locked(dev);
pci_restore_state(dev);
}