summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorSujith Manoharan <c_manoha@qca.qualcomm.com>2014-01-09 08:51:14 +0530
committerJohn W. Linville <linville@tuxdriver.com>2014-01-09 10:56:41 -0500
commitff9a93f2ebb88ac7aab9568de80b64b92078e96d (patch)
tree8b1c582c96cdc0e3495ffce00f0099218184d00e /drivers
parent9c36254cd767bbdde5538b51bf94921727e595d4 (diff)
downloadlinux-ff9a93f2ebb88ac7aab9568de80b64b92078e96d.tar.bz2
ath9k: Use correct channel for RX packets
Accessing the current channel definition in mac80211 when processing RX packets is problematic because it could have been updated when a scan is issued. Since a channel change involves flushing the existing packets in the RX queue before a chip-reset is done, they would be processed using the wrong band/channel information. To avoid this, use the current channel information maintained in the driver. Cc: stable@vger.kernel.org Reported-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c25
1 files changed, 14 insertions, 11 deletions
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 6d643ca8c1a3..f7cc5b37a18f 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -850,20 +850,15 @@ static int ath9k_process_rate(struct ath_common *common,
enum ieee80211_band band;
unsigned int i = 0;
struct ath_softc __maybe_unused *sc = common->priv;
+ struct ath_hw *ah = sc->sc_ah;
- band = hw->conf.chandef.chan->band;
+ band = ah->curchan->chan->band;
sband = hw->wiphy->bands[band];
- switch (hw->conf.chandef.width) {
- case NL80211_CHAN_WIDTH_5:
+ if (IS_CHAN_QUARTER_RATE(ah->curchan))
rxs->flag |= RX_FLAG_5MHZ;
- break;
- case NL80211_CHAN_WIDTH_10:
+ else if (IS_CHAN_HALF_RATE(ah->curchan))
rxs->flag |= RX_FLAG_10MHZ;
- break;
- default:
- break;
- }
if (rx_stats->rs_rate & 0x80) {
/* HT rate */
@@ -1078,6 +1073,14 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
rx_stats->is_mybeacon = ath9k_is_mybeacon(sc, hdr);
+ /*
+ * This shouldn't happen, but have a safety check anyway.
+ */
+ if (WARN_ON(!ah->curchan)) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
ret =-EINVAL;
goto exit;
@@ -1085,8 +1088,8 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
ath9k_process_rssi(common, hw, rx_stats, rx_status);
- rx_status->band = hw->conf.chandef.chan->band;
- rx_status->freq = hw->conf.chandef.chan->center_freq;
+ rx_status->band = ah->curchan->chan->band;
+ rx_status->freq = ah->curchan->chan->center_freq;
rx_status->antenna = rx_stats->rs_antenna;
rx_status->flag |= RX_FLAG_MACTIME_END;