Merge tag 'ux500-devicetree-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From Linus Walleij:

Ux500 device tree patches for v3.14, take one:

- Fix up tc3589x bindings so this chip works again.

- Remove SSP platform devices, as we now boot from device tree
  exclusively.

- Delete surplus AB8500/DB8500 platform data, not obtained from
  the device tree.

- Add DMA config for the MSP devices.

- A series of 21 patches moving pin control config for the
  on-chip Nomadik pin controller from the board file
  to the device tree, step by step.

- Two patches to the STE DMA40 driver regarding the high-prio
  DMA channel so this can be moved to the device tree. Both have
  Vinod's ACK.

- Decommission of the non-device tree boot path for the timer
  initialization code.

- Deletion of the non-devicetree probe path from the MTU timer
  driver, as all platforms using it are now using device tree.
  This has Daniel Lezcano's ACK.

* tag 'ux500-devicetree-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (39 commits)
  ARM: ux500: decomission custom SMP TWD timer init
  clksrc: delete nomadik MTU non-DT boot path
  ARM: ux500: decomission the non-DT MTU init sequence
  dma: ste_dma40: Parse flags property for new 'high priority channel' request
  dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag
  ARM: ux500: Remove checking for DT during timer init
  ARM: ux500: Clean-up legacy extern prototype
  ARM: ux500: Remove unused call to register AMBA devices
  ARM: ux500: Clean-up non-DT IRQ initialisation
  pinctrl: nomadik: decomission non-DT boot path
  pinctrl: nomadik: move platform data handling into driver
  ARM: ux500: get rid of unused header
  ARM: ux500: delete Nomadik pinctrl AUXDATA
  ARM: ux500: delete remnant pin config macros
  ARM: ux500: move snowball pin configs to device tree
  ARM: ux500: move snowball LED pin control to device tree
  ARM: ux500: convert Snowball SPI pin reference
  ARM: ux500: move snowball ethernet config to device tree
  ARM: ux500: move HREFv60plus pin configs to device tree
  ARM: ux500: move final HREFv60 LCD pins to device tree
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

4 files changed, 258 insertions, 79 deletions

diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index ed7b73b508e0..f00b5c9ce8b6 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -20,7 +20,6 @@
 #include <linux/jiffies.h>
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
 #include <linux/sched_clock.h>
 #include <asm/mach/time.h>
 
@@ -103,7 +102,7 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
 	return 0;
 }
 
-void nmdk_clkevt_reset(void)
+static void nmdk_clkevt_reset(void)
 {
 	if (clkevt_periodic) {
 		/* Timer: configure load and background-load, and fire it up */
@@ -144,7 +143,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 	}
 }
 
-void nmdk_clksrc_reset(void)
+static void nmdk_clksrc_reset(void)
 {
 	/* Disable */
 	writel(0, mtu_base + MTU_CR(0));
@@ -192,8 +191,8 @@ static struct irqaction nmdk_timer_irq = {
 	.dev_id		= &nmdk_clkevt,
 };
 
-static void __init __nmdk_timer_init(void __iomem *base, int irq,
-				     struct clk *pclk, struct clk *clk)
+static void __init nmdk_timer_init(void __iomem *base, int irq,
+				   struct clk *pclk, struct clk *clk)
 {
 	unsigned long rate;
 
@@ -245,18 +244,6 @@ static void __init __nmdk_timer_init(void __iomem *base, int irq,
 	register_current_timer_delay(&mtu_delay_timer);
 }
 
-void __init nmdk_timer_init(void __iomem *base, int irq)
-{
-	struct clk *clk0, *pclk0;
-
-	pclk0 = clk_get_sys("mtu0", "apb_pclk");
-	BUG_ON(IS_ERR(pclk0));
-	clk0 = clk_get_sys("mtu0", NULL);
-	BUG_ON(IS_ERR(clk0));
-
-	__nmdk_timer_init(base, irq, pclk0, clk0);
-}
-
 static void __init nmdk_timer_of_init(struct device_node *node)
 {
 	struct clk *pclk;
@@ -280,7 +267,7 @@ static void __init nmdk_timer_of_init(struct device_node *node)
 	if (irq <= 0)
 		panic("Can't parse IRQ");
 
-	__nmdk_timer_init(base, irq, pclk, clk);
+	nmdk_timer_init(base, irq, pclk, clk);
 }
 CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
 		       nmdk_timer_of_init);
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index b8c031b7de4e..00a2de957b23 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -2409,6 +2409,7 @@ static void d40_set_prio_realtime(struct d40_chan *d40c)
 #define D40_DT_FLAGS_DIR(flags)        ((flags >> 1) & 0x1)
 #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
 #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
+#define D40_DT_FLAGS_HIGH_PRIO(flags)  ((flags >> 4) & 0x1)
 
 static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
 				  struct of_dma *ofdma)
@@ -2446,6 +2447,9 @@ static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
 		cfg.use_fixed_channel = true;
 	}
 
+	if (D40_DT_FLAGS_HIGH_PRIO(flags))
+		cfg.high_priority = true;
+
 	return dma_request_channel(cap, stedma40_filter, &cfg);
 }
 
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 7111c3b59130..983662e846a4 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2008,2009 STMicroelectronics
  * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
  *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2011-2013 Linus Walleij <linus.walleij@linaro.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -33,7 +33,6 @@
 #include <linux/pinctrl/pinconf.h>
 /* Since we request GPIOs from ourself */
 #include <linux/pinctrl/consumer.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
 #include "pinctrl-nomadik.h"
 #include "core.h"
 
@@ -45,6 +44,221 @@
  * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
  */
 
+/*
+ * pin configurations are represented by 32-bit integers:
+ *
+ *	bit  0.. 8 - Pin Number (512 Pins Maximum)
+ *	bit  9..10 - Alternate Function Selection
+ *	bit 11..12 - Pull up/down state
+ *	bit     13 - Sleep mode behaviour
+ *	bit     14 - Direction
+ *	bit     15 - Value (if output)
+ *	bit 16..18 - SLPM pull up/down state
+ *	bit 19..20 - SLPM direction
+ *	bit 21..22 - SLPM Value (if output)
+ *	bit 23..25 - PDIS value (if input)
+ *	bit	26 - Gpio mode
+ *	bit	27 - Sleep mode
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ *		     pull up/down = disabled
+ *		     sleep mode = input/wakeup
+ *		     direction = input
+ *		     value = low
+ *		     SLPM direction = same as normal
+ *		     SLPM pull = same as normal
+ *		     SLPM value = same as normal
+ *
+ * PIN_CFG	   - default config with alternate function
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK		0x1ff
+#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT		9
+#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT		11
+#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT		13
+#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_MAKE_INPUT	(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
+
+#define PIN_SLPM_GPIO  PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
+#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
+
+#define PIN_DIR_SHIFT		14
+#define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
+#define PIN_DIR(x)		(((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
+#define PIN_DIR_INPUT		(0 << PIN_DIR_SHIFT)
+#define PIN_DIR_OUTPUT		(1 << PIN_DIR_SHIFT)
+
+#define PIN_VAL_SHIFT		15
+#define PIN_VAL_MASK		(0x1 << PIN_VAL_SHIFT)
+#define PIN_VAL(x)		(((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
+#define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
+#define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
+
+#define PIN_SLPM_PULL_SHIFT	16
+#define PIN_SLPM_PULL_MASK	(0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x)	\
+	(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE	\
+	((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP	\
+	((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN	\
+	((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT	19
+#define PIN_SLPM_DIR_MASK	(0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x)		\
+	(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT	((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT	((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT	21
+#define PIN_SLPM_VAL_MASK	(0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x)		\
+	(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+#define PIN_SLPM_PDIS_SHIFT		23
+#define PIN_SLPM_PDIS_MASK		(0x3 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS(x)	\
+	(((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_NO_CHANGE		(0 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_DISABLED		(1 << PIN_SLPM_PDIS_SHIFT)
+#define PIN_SLPM_PDIS_ENABLED		(2 << PIN_SLPM_PDIS_SHIFT)
+
+#define PIN_LOWEMI_SHIFT	25
+#define PIN_LOWEMI_MASK		(0x1 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI(x)		(((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_DISABLED	(0 << PIN_LOWEMI_SHIFT)
+#define PIN_LOWEMI_ENABLED	(1 << PIN_LOWEMI_SHIFT)
+
+#define PIN_GPIOMODE_SHIFT	26
+#define PIN_GPIOMODE_MASK	(0x1 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE(x)		(((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_DISABLED	(0 << PIN_GPIOMODE_SHIFT)
+#define PIN_GPIOMODE_ENABLED	(1 << PIN_GPIOMODE_SHIFT)
+
+#define PIN_SLEEPMODE_SHIFT	27
+#define PIN_SLEEPMODE_MASK	(0x1 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE(x)	(((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_DISABLED	(0 << PIN_SLEEPMODE_SHIFT)
+#define PIN_SLEEPMODE_ENABLED	(1 << PIN_SLEEPMODE_SHIFT)
+
+
+/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
+#define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL	(PIN_DIR_INPUT | PIN_PULL_NONE)
+#define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
+#define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
+
+#define PIN_SLPM_INPUT_PULLDOWN	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
+
+#define PIN_CFG_DEFAULT		(0)
+
+#define PIN_CFG(num, alt)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_INPUT(num, alt, pull)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+#define GPIO_BLOCK_SHIFT 5
+#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+#define NMK_GPIO_LOWEMI	0x28
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+/* These appear in DB8540 and later ASICs */
+#define NMK_GPIO_EDGELEVEL 0x5C
+#define NMK_GPIO_LEVEL	0x60
+
+
+/* Pull up/down values */
+enum nmk_gpio_pull {
+	NMK_GPIO_PULL_NONE,
+	NMK_GPIO_PULL_UP,
+	NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+	NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_NOCHANGE,
+	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+	int num_gpio;
+	u32 (*get_secondary_status)(unsigned int bank);
+	void (*set_ioforce)(bool enable);
+	bool supports_sleepmode;
+};
+
 struct nmk_gpio_chip {
 	struct gpio_chip chip;
 	struct irq_domain *domain;
@@ -1026,7 +1240,7 @@ static const struct irq_domain_ops nmk_gpio_irq_simple_ops = {
 
 static int nmk_gpio_probe(struct platform_device *dev)
 {
-	struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
+	struct nmk_gpio_platform_data *pdata;
 	struct device_node *np = dev->dev.of_node;
 	struct nmk_gpio_chip *nmk_chip;
 	struct gpio_chip *chip;
@@ -1034,32 +1248,24 @@ static int nmk_gpio_probe(struct platform_device *dev)
 	struct clk *clk;
 	int secondary_irq;
 	void __iomem *base;
-	int irq_start = 0;
 	int irq;
 	int ret;
 
-	if (!pdata && !np) {
-		dev_err(&dev->dev, "No platform data or device tree found\n");
-		return -ENODEV;
-	}
-
-	if (np) {
-		pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
-		if (!pdata)
-			return -ENOMEM;
-
-		if (of_get_property(np, "st,supports-sleepmode", NULL))
-			pdata->supports_sleepmode = true;
+	pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
 
-		if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
-			dev_err(&dev->dev, "gpio-bank property not found\n");
-			return -EINVAL;
-		}
+	if (of_get_property(np, "st,supports-sleepmode", NULL))
+		pdata->supports_sleepmode = true;
 
-		pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
-		pdata->num_gpio   = NMK_GPIO_PER_CHIP;
+	if (of_property_read_u32(np, "gpio-bank", &dev->id)) {
+		dev_err(&dev->dev, "gpio-bank property not found\n");
+		return -EINVAL;
 	}
 
+	pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP;
+	pdata->num_gpio = NMK_GPIO_PER_CHIP;
+
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0)
 		return irq;
@@ -1107,10 +1313,7 @@ static int nmk_gpio_probe(struct platform_device *dev)
 	clk_enable(nmk_chip->clk);
 	nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI);
 	clk_disable(nmk_chip->clk);
-
-#ifdef CONFIG_OF_GPIO
 	chip->of_node = np;
-#endif
 
 	ret = gpiochip_add(&nmk_chip->chip);
 	if (ret)
@@ -1122,10 +1325,8 @@ static int nmk_gpio_probe(struct platform_device *dev)
 
 	platform_set_drvdata(dev, nmk_chip);
 
-	if (!np)
-		irq_start = pdata->first_irq;
 	nmk_chip->domain = irq_domain_add_simple(np,
-				NMK_GPIO_PER_CHIP, irq_start,
+				NMK_GPIO_PER_CHIP, 0,
 				&nmk_gpio_irq_simple_ops, nmk_chip);
 	if (!nmk_chip->domain) {
 		dev_err(&dev->dev, "failed to create irqdomain\n");
@@ -1858,11 +2059,10 @@ static int nmk_pinctrl_resume(struct platform_device *pdev)
 
 static int nmk_pinctrl_probe(struct platform_device *pdev)
 {
-	const struct platform_device_id *platid = platform_get_device_id(pdev);
+	const struct of_device_id *match;
 	struct device_node *np = pdev->dev.of_node;
 	struct device_node *prcm_np;
 	struct nmk_pinctrl *npct;
-	struct resource *res;
 	unsigned int version = 0;
 	int i;
 
@@ -1870,16 +2070,10 @@ static int nmk_pinctrl_probe(struct platform_device *pdev)
 	if (!npct)
 		return -ENOMEM;
 
-	if (platid)
-		version = platid->driver_data;
-	else if (np) {
-		const struct of_device_id *match;
-
-		match = of_match_device(nmk_pinctrl_match, &pdev->dev);
-		if (!match)
-			return -ENODEV;
-		version = (unsigned int) match->data;
-	}
+	match = of_match_device(nmk_pinctrl_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+	version = (unsigned int) match->data;
 
 	/* Poke in other ASIC variants here */
 	if (version == PINCTRL_NMK_STN8815)
@@ -1889,17 +2083,9 @@ static int nmk_pinctrl_probe(struct platform_device *pdev)
 	if (version == PINCTRL_NMK_DB8540)
 		nmk_pinctrl_db8540_init(&npct->soc);
 
-	if (np) {
-		prcm_np = of_parse_phandle(np, "prcm", 0);
-		if (prcm_np)
-			npct->prcm_base = of_iomap(prcm_np, 0);
-	}
-
-	/* Allow platform passed information to over-write DT. */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res)
-		npct->prcm_base = devm_ioremap(&pdev->dev, res->start,
-					       resource_size(res));
+	prcm_np = of_parse_phandle(np, "prcm", 0);
+	if (prcm_np)
+		npct->prcm_base = of_iomap(prcm_np, 0);
 	if (!npct->prcm_base) {
 		if (version == PINCTRL_NMK_STN8815) {
 			dev_info(&pdev->dev,
@@ -1958,13 +2144,6 @@ static struct platform_driver nmk_gpio_driver = {
 	.probe = nmk_gpio_probe,
 };
 
-static const struct platform_device_id nmk_pinctrl_id[] = {
-	{ "pinctrl-stn8815", PINCTRL_NMK_STN8815 },
-	{ "pinctrl-db8500", PINCTRL_NMK_DB8500 },
-	{ "pinctrl-db8540", PINCTRL_NMK_DB8540 },
-	{ }
-};
-
 static struct platform_driver nmk_pinctrl_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
@@ -1972,7 +2151,6 @@ static struct platform_driver nmk_pinctrl_driver = {
 		.of_match_table = nmk_pinctrl_match,
 	},
 	.probe = nmk_pinctrl_probe,
-	.id_table = nmk_pinctrl_id,
 #ifdef CONFIG_PM
 	.suspend = nmk_pinctrl_suspend,
 	.resume = nmk_pinctrl_resume,
diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h
index bcd4191e10ea..d8215f1e70c7 100644
--- a/drivers/pinctrl/pinctrl-nomadik.h
+++ b/drivers/pinctrl/pinctrl-nomadik.h
@@ -1,13 +1,23 @@
 #ifndef PINCTRL_PINCTRL_NOMADIK_H
 #define PINCTRL_PINCTRL_NOMADIK_H
 
-#include <linux/platform_data/pinctrl-nomadik.h>
-
 /* Package definitions */
 #define PINCTRL_NMK_STN8815	0
 #define PINCTRL_NMK_DB8500	1
 #define PINCTRL_NMK_DB8540	2
 
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+#define NMK_GPIO_ALT_CX_SHIFT 2
+#define NMK_GPIO_ALT_C1	((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C2	((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C3	((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+#define NMK_GPIO_ALT_C4	((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
+
 #define PRCM_GPIOCR_ALTCX(pin_num,\
 	altc1_used, altc1_ri, altc1_cb,\
 	altc2_used, altc2_ri, altc2_cb,\