Merge branch 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (821 commits)
  x86: make 64bit hpet_set_mapping to use ioremap too, v2
  x86: get x86_phys_bits early
  x86: max_low_pfn_mapped fix #4
  x86: change _node_to_cpumask_ptr to return const ptr
  x86: I/O APIC: remove an IRQ2-mask hack
  x86: fix numaq_tsc_disable calling
  x86, e820: remove end_user_pfn
  x86: max_low_pfn_mapped fix, #3
  x86: max_low_pfn_mapped fix, #2
  x86: max_low_pfn_mapped fix, #1
  x86_64: fix delayed signals
  x86: remove conflicting nx6325 and nx6125 quirks
  x86: Recover timer_ack lost in the merge of the NMI watchdog
  x86: I/O APIC: Never configure IRQ2
  x86: L-APIC: Always fully configure IRQ0
  x86: L-APIC: Set IRQ0 as edge-triggered
  x86: merge dwarf2 headers
  x86: use AS_CFI instead of UNWIND_INFO
  x86: use ignore macro instead of hash comment
  x86: use matching CFI_ENDPROC
  ...

1 files changed, 252 insertions, 0 deletions

diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
new file mode 100644
index 000000000000..5b546e365f00
--- /dev/null
+++ b/drivers/xen/manage.c
@@ -0,0 +1,252 @@
+/*
+ * Handle extern requests for shutdown, reboot and sysrq
+ */
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/reboot.h>
+#include <linux/sysrq.h>
+#include <linux/stop_machine.h>
+#include <linux/freezer.h>
+
+#include <xen/xenbus.h>
+#include <xen/grant_table.h>
+#include <xen/events.h>
+#include <xen/hvc-console.h>
+#include <xen/xen-ops.h>
+
+#include <asm/xen/hypercall.h>
+#include <asm/xen/page.h>
+
+enum shutdown_state {
+	SHUTDOWN_INVALID = -1,
+	SHUTDOWN_POWEROFF = 0,
+	SHUTDOWN_SUSPEND = 2,
+	/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only
+	   report a crash, not be instructed to crash!
+	   HALT is the same as POWEROFF, as far as we're concerned.  The tools use
+	   the distinction when we return the reason code to them.  */
+	 SHUTDOWN_HALT = 4,
+};
+
+/* Ignore multiple shutdown requests. */
+static enum shutdown_state shutting_down = SHUTDOWN_INVALID;
+
+#ifdef CONFIG_PM_SLEEP
+static int xen_suspend(void *data)
+{
+	int *cancelled = data;
+	int err;
+
+	BUG_ON(!irqs_disabled());
+
+	load_cr3(swapper_pg_dir);
+
+	err = device_power_down(PMSG_SUSPEND);
+	if (err) {
+		printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n",
+		       err);
+		return err;
+	}
+
+	xen_mm_pin_all();
+	gnttab_suspend();
+	xen_pre_suspend();
+
+	/*
+	 * This hypercall returns 1 if suspend was cancelled
+	 * or the domain was merely checkpointed, and 0 if it
+	 * is resuming in a new domain.
+	 */
+	*cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info));
+
+	xen_post_suspend(*cancelled);
+	gnttab_resume();
+	xen_mm_unpin_all();
+
+	device_power_up();
+
+	if (!*cancelled) {
+		xen_irq_resume();
+		xen_console_resume();
+	}
+
+	return 0;
+}
+
+static void do_suspend(void)
+{
+	int err;
+	int cancelled = 1;
+
+	shutting_down = SHUTDOWN_SUSPEND;
+
+#ifdef CONFIG_PREEMPT
+	/* If the kernel is preemptible, we need to freeze all the processes
+	   to prevent them from being in the middle of a pagetable update
+	   during suspend. */
+	err = freeze_processes();
+	if (err) {
+		printk(KERN_ERR "xen suspend: freeze failed %d\n", err);
+		return;
+	}
+#endif
+
+	err = device_suspend(PMSG_SUSPEND);
+	if (err) {
+		printk(KERN_ERR "xen suspend: device_suspend %d\n", err);
+		goto out;
+	}
+
+	printk("suspending xenbus...\n");
+	/* XXX use normal device tree? */
+	xenbus_suspend();
+
+	err = stop_machine_run(xen_suspend, &cancelled, 0);
+	if (err) {
+		printk(KERN_ERR "failed to start xen_suspend: %d\n", err);
+		goto out;
+	}
+
+	if (!cancelled)
+		xenbus_resume();
+	else
+		xenbus_suspend_cancel();
+
+	device_resume();
+
+	/* Make sure timer events get retriggered on all CPUs */
+	clock_was_set();
+out:
+#ifdef CONFIG_PREEMPT
+	thaw_processes();
+#endif
+	shutting_down = SHUTDOWN_INVALID;
+}
+#endif	/* CONFIG_PM_SLEEP */
+
+static void shutdown_handler(struct xenbus_watch *watch,
+			     const char **vec, unsigned int len)
+{
+	char *str;
+	struct xenbus_transaction xbt;
+	int err;
+
+	if (shutting_down != SHUTDOWN_INVALID)
+		return;
+
+ again:
+	err = xenbus_transaction_start(&xbt);
+	if (err)
+		return;
+
+	str = (char *)xenbus_read(xbt, "control", "shutdown", NULL);
+	/* Ignore read errors and empty reads. */
+	if (XENBUS_IS_ERR_READ(str)) {
+		xenbus_transaction_end(xbt, 1);
+		return;
+	}
+
+	xenbus_write(xbt, "control", "shutdown", "");
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err == -EAGAIN) {
+		kfree(str);
+		goto again;
+	}
+
+	if (strcmp(str, "poweroff") == 0 ||
+	    strcmp(str, "halt") == 0) {
+		shutting_down = SHUTDOWN_POWEROFF;
+		orderly_poweroff(false);
+	} else if (strcmp(str, "reboot") == 0) {
+		shutting_down = SHUTDOWN_POWEROFF; /* ? */
+		ctrl_alt_del();
+#ifdef CONFIG_PM_SLEEP
+	} else if (strcmp(str, "suspend") == 0) {
+		do_suspend();
+#endif
+	} else {
+		printk(KERN_INFO "Ignoring shutdown request: %s\n", str);
+		shutting_down = SHUTDOWN_INVALID;
+	}
+
+	kfree(str);
+}
+
+static void sysrq_handler(struct xenbus_watch *watch, const char **vec,
+			  unsigned int len)
+{
+	char sysrq_key = '\0';
+	struct xenbus_transaction xbt;
+	int err;
+
+ again:
+	err = xenbus_transaction_start(&xbt);
+	if (err)
+		return;
+	if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) {
+		printk(KERN_ERR "Unable to read sysrq code in "
+		       "control/sysrq\n");
+		xenbus_transaction_end(xbt, 1);
+		return;
+	}
+
+	if (sysrq_key != '\0')
+		xenbus_printf(xbt, "control", "sysrq", "%c", '\0');
+
+	err = xenbus_transaction_end(xbt, 0);
+	if (err == -EAGAIN)
+		goto again;
+
+	if (sysrq_key != '\0')
+		handle_sysrq(sysrq_key, NULL);
+}
+
+static struct xenbus_watch shutdown_watch = {
+	.node = "control/shutdown",
+	.callback = shutdown_handler
+};
+
+static struct xenbus_watch sysrq_watch = {
+	.node = "control/sysrq",
+	.callback = sysrq_handler
+};
+
+static int setup_shutdown_watcher(void)
+{
+	int err;
+
+	err = register_xenbus_watch(&shutdown_watch);
+	if (err) {
+		printk(KERN_ERR "Failed to set shutdown watcher\n");
+		return err;
+	}
+
+	err = register_xenbus_watch(&sysrq_watch);
+	if (err) {
+		printk(KERN_ERR "Failed to set sysrq watcher\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int shutdown_event(struct notifier_block *notifier,
+			  unsigned long event,
+			  void *data)
+{
+	setup_shutdown_watcher();
+	return NOTIFY_DONE;
+}
+
+static int __init setup_shutdown_event(void)
+{
+	static struct notifier_block xenstore_notifier = {
+		.notifier_call = shutdown_event
+	};
+	register_xenstore_notifier(&xenstore_notifier);
+
+	return 0;
+}
+
+subsys_initcall(setup_shutdown_event);